BEFORE YOU BEGIN

Before using this product, read the Important Safety and Legal Information pamphlet and follow its instructions.

Your Module's Battery

CHARGE

START BLUETOOTH FEATURE

Your Module
HS830 Bluetooth Wireless Module
Get Connected in 5 Quick Steps
1 - CHARGE 2 - START BLUETOOTH FEATURE 3 - PAIR 4 - CONNECT TO NECK STRAP 5 - TEST AND USE
Take a moment before you get started to familiarize yourself with your new HS830 Wireless Module. Charging Port Volume Up Button Volume Down Button
Your Phone Your phone's Bluetooth feature is off by default. To use your wireless module, you must turn on the Bluetooth feature in your phone. Release Tab Down For most Motorola phones: (Menu 1 Press M( ) > Settings > Connection >
Before you can use your wireless module, you must pair (link) it with your phone. Step A - PUT THE MODULE IN PAIRING MODE Indicator Light
1 Plug the Motorola charger into the end of
the module with the release tab facing down. The indicator light turns on when the battery is charging. It may take up to 1 minute for the indicator light to turn on. When the module's battery is fully charged (about 2 hours), the indicator light turns off.
Bluetooth Link > Setup.
2 Scroll to Power. 3 Select Change. 4 Scroll to On. 5 Press Select to turn on the Bluetooth
feature. The Bluetooth feature remains on until you turn the feature off.
Note: These steps are for most Motorola phones. For other phones, see your phone's user's guide.
1 Ensure the wireless module is turned off
(indicator light not blinking).
2 Press and hold the Call E button for 6
Indicator Light Module Jack

Call Button

2 Disconnect the charger.
Note: Module is not functional while charging.
seconds. The indicator light will initially flash, but continue to hold down the button until the indicator light is steadily lit. If the indicator light is flashing or not steadily lit when releasing the button, repeat both steps 1 and 2 on this page.
Motorola, Inc. Consumer Advocacy Office 1307 East Algonquin Road Schaumburg, IL 60196 USA www.hellomoto.com 1-877-MOTOBLU 1-800-331-6456 (United States) 1-888-390-6456 (TTY/TDD United States for hearing impaired) 1-800-461-4575 (Canada) Part Number: 6809495A49-O
MOTOROLA and the Stylized M Logo are registered in the US Patent & Trademark Office. The Bluetooth trademarks are owned by their proprietor and used by Motorola, Inc. under license. All other product or service names are the property of their respective owners. The use of wireless devices and their accessories may be prohibited or restricted in certain areas. Always obey the laws and regulations on the use of these products.

PAIR CONTINUED

Your Phone
Your Module to Neck Strap

CONNECT

TEST AND USE

TROUBLESHOOTING

My phone doesn't find my wireless module. Make sure the indicator light on your wireless module is on and steady when your phone is searching for devices (see step 3). My wireless module worked before but now it's not working. Make sure your phone is on and the Bluetooth feature is turned on in your phone (see step 2). If the Bluetooth feature was turned off or was turned on only temporarily, you may need to restart the Bluetooth feature (see step 2) and pair your phone and wireless module again (see step 3). Support. If you need more help, contact us at 1- 877-MOTOBLU. FOR DETAILS ABOUT YOUR HANDSFREE DEVICE See the users guide or visit us at www.hellomoto.com/bluetooth and click Support.

Step B - SET YOUR PHONE TO LOOK FOR YOUR MODULE For most Motorola phones: (Menu 1 On your Motorola phone, press M( ) >
1 Insert the 2.5mm plug from the
neck strap into the module jack on the bottom of the wireless module. Slots
Your phone and wireless module are now paired and ready to make and receive calls. To make a call:
Settings > Connection > Bluetooth Link > Handsfree > Look for Devices.

Plug Neck Strap Holder

1 Place the neck strap on and the earbud in your ear. 2 On your phone, dial the number you want
to call and press the SEND key.
The phone lists Bluetooth devices it finds.
your phone. 4 Enter the passkey: Select OK.
2 Select Motorola HS830. 3 Select OK or Yes to pair your module with

Module Jack

3 If your phone and module are successfully
After you have successfully paired your phone and module, you don't need to repeat these steps. For daily use, ensure that your module is turned ON and that your phone's Bluetooth feature is ON. To save battery power, turn OFF the module when you don't use it for an extended time.
paired, you will hear ringing on the earbud.
2 Push the wireless module back
into the neck strap holder.
When your wireless module successfully pairs with your phone, the indicator light changes from steadily lit to flashing.
3 Insert the two tabs on the neck
strap holder into the slots on the top of the wireless module. neck and insert the earbud in your ear.
4 Place the neck strap around your

Motorola, Inc. 2005.

TURNING ON AND OFF
To turn on the wireless module, press and hold the Call E button on your module until the indicator light begins flashing. The indicator light blinks when the power is on. To turn off the wireless module, press and hold the Call E button on your module for 5 seconds. The indicator light will flash rapidly and then stop flashing.

ADJUSTING VOLUME

To adjust the volume on your wireless module, press the Volume Up or Volume Down button until you reach the desired volume level. Volume Up Button Volume Down Button Function

MAKING CALLS

Action Tap the Call button and speak the name after the tone Tap the Call button Tap the Call button Press and hold the Call button until you hear a beep Press and hold the Call button until you hear a beep Press and hold both Volume buttons until you hear a beep. Press either Volume button Tap the Call button Make a voice dial call Receive a call End a call Reject a call Redial last call

MAKING CALLS CONTINUED

Function Answer a second incoming call Toggle between two active calls Join a 3-way call (Note: Feature is phone/ network dependent.) Put an active call on hold or resume a call on hold Action Press and hold the Call button (places first call on hold) Press and hold the Call button Press and hold both Volume buttons Press and hold the Call button until you hear a beep
IMPORTANT: Be sure to first follow the Quick Start Guide on the reverse side to complete initial setup of your HS830.
Indicator Light Call Button
Mute a call Unmute a call Transfer a call from the phone to the module
Note: Your HS830 supports both Handsfree and Headset Profiles. Accessing call functions depends upon which profile your phone supports. See your phone's user's guide for more information.
When increasing (or decreasing) volume, a single audio tone is heard when reaching maximum (or minimum) level.
The indicator light provides information about your wireless module status. With the Charger Plugged In Indicator Light Module Status On (steady) Off Indicator Light Off On (steady) 10 rapid flashes Slow pulse Quick flash Charging Charging complete With No Charger Plugged In Module Status Power off Pairing mode Pairing successful Connected (on a call) Standby (not on call)

INDICATOR LIGHTS

AUDIO TONES
Audio Tone Single high tone when pressing volume button Five rapid high tones repeated every 60 sec. No audio indications; deteriorating quality Series of 4 tones (low to high) Ring tone Single high tone Single low tone Dual high/low tone Single high tone Series of 4 tones (high to low) Module Status Volume at minimum or maximum Low battery Out of range Call active Incoming call Pairing confirmation Voice activation Voice tag not recognized End call Audio link closed (headset mode) Call ended (handsfree mode)

AUDIO TONES CONTINUED

Audio Tone Fast high/low tone every 5 seconds (max. & min. volume confirm beep) No tone Module Status No network/service
OTHER WIRELESS MODULE APPLICATIONS
The wireless module can also be used as a handsfree device on a helmet. The Motorola SYN0997 Universal Helmet Adapter mounts to almost any helmet - motorcycle/scooter, skiing, snowboarding. The wireless module slides into the helmet adapter creating a handsfree accessory for your helmet. Two wireless modules can also be configured for full-duplex voice communication with each other. For example, a motorcycle driver may communicate wirelessly with a rider sitting behind. For details on these applications, see the HS830 Helmet Adapter User's Guide.

Power off

The wireless module sounds an audible alert so that you do not miss an incoming call even if your phone is in a bag or briefcase. The audible alert can be turned on or off by pressing and holding both Volume buttons for 3 seconds.
Note: Disabling the audible alert does not affect the phone or earbud operation. Alerts will still be heard in the earbud speaker if the phone is set to other than silent mode.
Note: After 5 minutes of inactivity, the indicator light stops flashing to conserve power, but the headset remains in standby mode.