Using a Voice Name

If you have created a voice name in Contacts for the number you want to call, say the voice name into your phone to enter the number. See page 37 for information on voice names. You can use a voice name to enter a number with the flip open or closed. 1 Press and hold t until a prompt appears telling you to say the voice name. 2 Speaking into the microphone, say the voice name assigned to the number you want to call. Your phone plays the name back to you. If you are making a phone call, the call is placed automatically. Tip: To stop a phone call from being completed, press. if the flip is closed or press e. If you are making a Private call, press and hold the PTT button to place the call.

From Datebook

If you have numbers stored as part of events in Datebook, you can use these numbers to make calls. For information on storing events in Datebook, see Datebook on page 79. 1 From the main menu, select Datebook. 2 Select the day of the event containing the number you want to call. 3 Highlight or select the event containing the number you want to call. For details, see Making Calls From Datebook on page 84.
Redialing the Last Number
Press and hold s to place a call to the last phone number you called.
Using Speed Dial and Turbo Dial
Each phone number stored in Contacts is assigned a Speed Dial number which you can use to call that number.
Speed Dial 1 From the idle screen, use the keypad to enter the Speed Dial number assigned to the phone number you want to call. 2 Press #. 3 Press s. Turbo Dial From the idle screen, press and hold the Speed Dial number (1 through 9) assigned to the phone number you want to call. If you want to view the missed call on the recent calls list, press A under View. With the Flip Closed If you want to dismiss the missed call message, press. If you want to view the missed call on the recent calls list, press. twice.

Using Speakerphone

Turning on speakerphone makes incoming sound come out of the phones speaker instead of the earpiece. Speakerphone is available whenever you are on an active phone call. With the Flip Open To turn speakerphone on or off: Press A under Spkr. -orPress t. With the Flip Closed When you make a call with the flip closed, speakerphone is always on. Opening the flip turns speakerphone off.

Sorting Call Alerts

Tip: You must have at least one call alert in the queue to access this feature. To sort call alerts by the order they were received: From the main menu, select Call Alert. Press m. Select Sort By. Select First on Top or Last on Top.

MOTOtalkTM

Note: MOTOtalk may not be offered by your service provider. MOTOtalk allows direct two-way phone-to-phone communications between two or more phones equipped for MOTOtalk. You can make and receive MOTOtalk calls even when network service is not available. You can talk to anyone on your code and channel within your range. Note: Range will vary based on terrain, man-made structures and atmospheric conditions. MOTOtalk allows you to: Use code or private mode operation Use up to 10 channels Communicate with standalone MOTOtalk radios Note: MOTOtalk is not compatible with older Family Radio Services products. The following features and main menu items will not be available while in MOTOtalk: On-network phone calls On-network Private calls Data transmission Incoming message notification
Musical ring tones Call forwarding Messages Call Timers Call alerts Voice records

Using MOTOtalk

To set your phone to MOTOtalk: 1 From the main menu, scroll to MOTOtalk and press O Navigation key. 2 Select Go to MOTOtalk. Switching to MOTOtalk Please Wait displays. After a few seconds, the MOTOtalk idle screen appears. The channel you are set to appears on the first line of the display, the code you are set to appears on the second line of the display and MT Ready appears just above the softkeys. Note: When switching from the network to MOTOtalk, the last channel and code that were set appear on the MOTOtalk idle screen. While in MOTOtalk, this icon m appears on the display, indicating that there is no network signal and MOTOtalk is active.

Channels and Codes

Exiting MOTOtalk
To set your phone to network mode when MOTOtalk is active: 1 From the MOTOtalk idle screen, press m. 2 Scroll to MT Options and press O Navigation key. 3 Select Exit MOTOtalk. Switching to Network Please Wait displays. After a few seconds, the network idle screen appears.

2 Select the text input mode you want to use. A checkmark appears next to the current mode.

Using Alpha Mode

Press any key on the keypad to enter the letters, numbers, and symbols on that key. For example, to enter the letter Y, press 9 three times. Type a letter then scroll up to make that letter uppercase, or type a letter then scroll down to make that letter lowercase. See Special Function Keys on page 66 for more information on adding spaces, capitalization, and punctuation.
l Alpha Press a key several times for each

character.

j Word Press a key once for each letter i Symbols Enter punctuation and other

symbols.

while words likely to be the one you want are chosen from a database.

Using Word Mode

In Word mode, T9 Text Input analyzes the letters on the keypad button you press and arranges them to create words. As you type, T9 Text Input matches your keystrokes to words in its database and displays the most commonly used matching word. You can add you own words to this database.

k Numeric Enter numbers.

When you access a screen that requires you to enter text, you start in the mode last used. To choose a text input mode: 1 At a screen that requires you to enter text, press m.

Entering a Word

1 Select Word as your text input mode. 2 Type a word by pressing one key for each letter. For example, to type test press 7 8.
The displayed word may change as you type it. Do not try to correct the word as you go. Type to the end of the word before editing. 3 If the word that appears is not the desired word, press 0 to change the word on the display to the next most likely word in the database. Repeat until the desired word appears. If the desired word does not appear, you can add it to the database. 3 Select the language you want for your database.

Special Function Keys

Some of the phones keys assume different functions while in Alpha or Word mode.

Message Notifications

When you receive a message, your phone notifies you with text on the display and a notification tone or vibration. You can access the message or dismiss the notification.

Message Center

The message center manages your messages. All your messages are stored in the message center. The message center shows how many messages you have of each type. To access your messages through the message center: 1 From the main menu, select Messages. 2 Scroll to the type of message you want to access. 3 Press O or press A under the display option on the left.

Voice Mail Messages

Note: To receive voice mail messages, you must first set up a voice mail account with your service provider.
Sending Unanswered Calls to Voice Mail
To send a phone call to voice mail instead of answering it: If the flip is closed, press. -orPress e. -orPress A under No.

Receiving a Message

When you receive a voice mail message, New Voice Mail Message appears on the display. To call your service providers voice mail system and listen to the message: Press A under Call. To dismiss the message notification: If the flip is closed, press. -orIf the flip is open, press O or press A under Back, or close the flip. If the caller leaves a message, this icon y appears on the display, reminding you that you have a new message.
Accessing Voice Mail from the Message Center
From the main menu, select Messages > Voice Mail.

MOSMS Messages

Note: This feature may not be offered by your service provider. If your service provider offers MOSMS, your phone sends SMS messages using MOSMS and receives SMS messages from other phones that are using MOSMS.
When you are finished, press O. 7 Select Expire After. This is the amount of time messages you send are saved at the service center if they cannot be delivered. After this period, they are discarded. Scroll to select the number of days you want your messages to be saved. When you are finished, press O. 8 Select Auto Clean Up. Set this option to On if you want your phone to delete sent messages. If you set Auto Clean Up to On, select Clean Up After to set the number of days after which sent messages are deleted or the number of messages to be kept. 9 Press A under Done to save the information you entered.

Beginning Messages From the Idle Screen
1 Using the keypad, enter the number you want to send a message to. 2 Press m. 3 Select Compose SMS. The message is automatically addressed to the phone number you chose. 4 Follow step 3 through step 4 of Creating and Sending Messages on page 72.

Using Quick Notes

Quick notes are short, pre-written text messages that you can create, edit, and send. You can store up to 20 quick notes. A quick note may be up to 30 characters long. To create a quick note: 1 From the main menu, select Messages > Quick Notes > [New Note]. 2 Press O or press A under Create. Enter text. -orTo choose from pre-installed notes, select the note you want. Tip: For more options, including sending the quick note, press m.
Beginning Messages From the Recent Calls List
1 From the recent calls list, scroll to the name you want to send a message to. 2 If the entry has more than one phone number stored, view the phone number you want to send the message to. 3 Press m. 4 Select Compose SMS. The message is automatically addressed to the phone number you chose. 5 Follow step 3 through step 4 of Creating and Sending Messages on page 72.

Using Drafts

When you save a message as a draft, it is saved in the drafts folder. To edit a draft: 1 From the main menu, select Messages > Drafts. 2 Select the draft you want to edit. 3 To edit the fields you want to change, follow step 2 through step 4 in Creating and Sending Messages on page 72.

Deleting Sent Messages

To delete a sent message: 1 From the main menu, select Messages > Text Outbox. 2 Scroll to the message you want to delete. 3 Press A under Delete. 4 Press A under Yes to confirm. To delete all unlocked sent messages: 1 From the main menu, select Messages > Text Outbox. 2 Press m. 3 Select Delete All. 4 Press A under Yes to confirm.

Resending Messages

To resend a message: 1 From the main menu, select Messages > Text Outbox. 2 Scroll to the message you want to resend. -orPress the number of the message you want to resend. 3 Press s. -orPress m. Select Resend.
Locking and Unlocking Sent Messages
When you lock a message, it cannot be deleted until you unlock it. Locking a Message 1 From the main menu, select Messages > Text Outbox. 2 Scroll to the message you want to lock or unlock. 3 Press m.

Sorting Messages

4 Select Lock. Unlocking a Message 1 From the main menu, select Messages > Text Outbox. 2 Scroll to the message you want to lock or unlock. 3 Press A under Unlock. The text inbox holds 20 messages. If the text inbox is full, you cannot receive messages until you delete some. The outbox and drafts folder share memory space. Together they can hold 30 messages. If the outbox and drafts folder memory is full, you cannot send messages or save drafts until you delete some. To view the amount of memory available in your text inbox: 1 From the main menu, select Messages > Text Inbox. 2 Press A under Memory. To view the amount of memory available in your outbox and drafts folder: 1 From the main menu, select Messages > Text Outbox or Messages > Drafts. 2 Press A under Memory.

Editing Events

To change the details of an event: Select the day the event occurs. Select the event. Press A under Edit. Follow the applicable instructions in Creating Events on page 80 to edit the various fields. Select the day the event occurs. Select the event. Press m. Select Copy. Press A under Yes to confirm. Enter the date you want. Press O. If you want to change more information, follow the applicable instructions in Creating Events on page 80 to edit the various fields.
To copy an event to another date: 7 8

Deleting Events

Select the day the event occurs. Select the event. Press m. Select Delete.

Receiving Reminders

5 If the event is not a recurring event, press O or press A under Yes to confirm. -orIf the event is a recurring event: Select This Event Only to delete only the event selected in step 2. Select Repeat Event to delete all occurrences of the event.
For Events with Java Applications
If you assigned a Java application to start when the event starts, you can start the application when you get the reminder. 1 Press m. 2 Select Launch.
If you created a reminder for a Datebook event, when the reminder time occurs, your phone notifies you with text on the display and a reminder tone. To view more details about the event: Open the flip. -orPress A under View. To dismiss the reminder: If the flip is closed, press. -orIf the flip is open, press O, press A under Dismiss, or close the flip. Tip: You can set your phone to power on when you receive a reminder. See Customizing Datebook Setup on page 84.
For Events with Numbers to Call
If you stored a phone number, Private ID, or Talkgroup number in the Subject or Location field of a Datebook event, you can call or send a call alert to that number from the reminder for that event. Making Calls from Reminders You can make phone calls, Private calls, and group calls to numbers in Datebook reminders. To call a number from a reminder: Press s. To make Private calls or group calls to a number from a reminder: Press the PTT button.
Making Calls From Datebook
If you stored a phone number, Private ID, or Talkgroup number in the Subject or Location field of a Datebook event, you can call or send a call alert to that number from Datebook. You can call the number stored in Subject and the number stored in Location if one is a phone number and the other is a Private ID or Talkgroup number. If both are the same type of number, the number in Subject is called or sent a call alert. To call or send a call alert to the number stored in Location, you must delete the number stored in Subject. To make a call or send a call alert: 1 Highlight or select the event containing the number you want to call or send a call alert to. 2 To make a phone call: Press s. -orPress m. Select Call # in Event. To make a Private call or group call: Press and hold the PTT button on the side of your phone. -orIf you did not include a # before the Talkgroup you want to call: Press m. Select Talkgroup.

To delete all Java applications: 3 4
5 Press O or press A under Yes to confirm. To create a shortcut to an application that is already installed: 1 From the main menu, select Settings > Personalize > Menu Options > Add/Remove Apps. -orFrom the main menu: Press m. Select Main Menu Setup > Add/Remove Apps. 2 Scroll to view the list of Java applications. Any application that has a shortcut on the main menu has a checkmark next to it. 3 Scroll to the application you want to create a shortcut for. 4 Press O. 5 Press A under Done. To remove a shortcut: 1 From the main menu, select Settings > Personalize > Menu Options > Add/Remove Apps. -orFrom the main menu: Press m. Select Main Menu Setup > Add/Remove Apps. 2 Scroll to view the list of Java applications. Any application that has a shortcut on the main menu has a checkmark next to it. 3 Scroll to the application you want to remove the shortcut for.
To view the amount of memory available for Java applications: 1 From the main menu, select Java Apps > Java System. 2 Press A under Next. 3 To see more memory information, press A under Next again. Deleting Java applications frees memory. Note: Java application data is stored in your phone using the same memory space used to store messages, voice records, pictures, ring tones, and wallpaper images. Deleting some of these other items frees memory for Java applications.
Shortcuts on the Main Menu
When you install an application, you can create a shortcut to the application on the main menu.
Java Applications and GPS Enabled
4 Press O. 5 Press A under Done. Unrestricted All Java applications may access the location of your phone, without notifying you. By Permission When a Java application attempts to access the location of your phone, you are prompted to give permission. However, location information may still be available to the phones owner, fleet manager, or account administrator. See Setting Privacy Options on page 99 for information on choosing these options.
Some Java applications can make use of your phones GPS feature to determine the approximate geographical location of your phone. (See GPS Enabled on page 93 for more information on the GPS feature.) However, for privacy reasons, you may not always want Java applications to access the location of your phone. Your phone protects your privacy by giving you the option to block all or some Java applications from accessing the location of your phone.
Granting or Denying Permission

When your GPS antenna is covered (for example, by your hand or other object) or facing the ground In temperature extremes outside the operating limits of your phone Walking or driving very slowly may also substantially reduce GPS performance. Even where location information can be calculated in such situations, it may take much longer to do so, and your location estimate may not be as accurate. Therefore, in any 911 call, always report the location to the emergency response center if you can and if you cannot, remain on your phone for as long as the emergency response center instructs you. Even where adequate signals from multiple satellites are available, your GPS feature will only provide an approximate location, often within 150 feet (45 meters) but sometimes much further from your actual location. Advice on how to improve GPS performance is provided in Enhancing GPS Performance on page 96. While the GPS feature of your phone can be a valuable navigational aid, it does not replace the need for careful navigating and good judgment. Never rely solely on one device for navigation. Remember that the accuracy of the location
information and the time needed to obtain it will vary depending on circumstances, particularly the ability to receive signals from adequate numbers of satellites. On emergency calls, your phone uses assistance information from the phone network to improve the speed and accuracy of your phones location calculation: if such assistance information becomes unavailable, it may reduce the speed and accuracy of the location calculation. The satellites used by the GPS feature of your phone are controlled by the U.S. government and are subject to changes implemented in accordance with the Department of Defense GPS user policy and the Federal Radionavigation Plan. These changes may affect the performance of the GPS feature of your phone.

Making an Emergency Call

Dial 911 to be connected to an emergency response center. If you are on an active call, you must end it before calling 911. When you make an emergency 911 call, the GPS feature of your phone begins to seek information to calculate your approximate location. It will take the GPS feature of your phone some time to determine your approximate location. Even where your phone has good access to sufficient

Viewing Your Approximate Location
GPS satellite signals and network assist data, it may take 30 seconds or more to determine the approximate location. This time will increase where there is reduced access to satellite signals. When your approximate location is determined, it is made available to the appropriate emergency response center. In some cases, your local 911 emergency response center may not be equipped to receive GPS location information. For this reason, and because the GPS location information reported is only approximate or may not be available in your location (see IMPORTANT: Things to Keep in Mind on page 93), always report your location to the 911 operator you speak to when making an emergency call, if able, just as you would when using a phone without GPS capabilities. Note: If you are concerned about whether your local 911 emergency response center is equipped to receive GPS location information, contact your local authorities. In general, if your phone has access to signals from more GPS satellites, your location will be determined faster and more accurately than if your phone has access to signals from fewer GPS satellites. If your phone does not have adequate access to GPS satellites signals, the location of the nearest cell tower in contact with your phone is automatically made available to the emergency response center, if the center has the capability to receive such information. See Enhancing GPS Performance on page 96 for information on how to help your phone determine your location.
1 From the main menu, select GPS > Position. 2 Scroll to view the entire screen. This displays the following information about the last time your location was calculated: The time (as Greenwich Mean Time) and date that the location was last calculated The approximate location, expressed as latitude and longitude The estimated accuracy of the calculated location. This estimate of accuracy is only a very rough estimate and may vary substantially from the actual accuracy of the approximate location information reported.
The number of satellites used to calculate the location. In general, more satellites make for better accuracy. To calculate your location again: Press A under Rfrsh. It may take your phone several minutes to complete the process of determining your location. During this time, a message usually appears on your phones display saying your phone is scanning for satellites. For tips on getting the best location calculation, see Enhancing GPS Performance. The Position screen displays the updated information. To cancel a location calculation before it is completed: Press A under Cancel to return to the Position screen. -orPress e to return to the idle screen. Each time approximate location of your phone is calculated, the latest location information is stored in your phone and remains there even when your phone is powered off. You will see this information the next time you view the Position screen. If you received a phone call or alert while attempting to determine your location, the Position screen will disappear, but your phone will continue attempting to determine its location. If it is successful, the new location information will be displayed the next time you view the Position screen.

Playing Voice Records

1 From the main menu, select VoiceRecord. 2 Select the voice record you want to play. 3 To stop the voice record while it is playing, press O. Tip: To fast forward, scroll right. To rewind, scroll left. To pause or resume, press any number key.

Labeling Voice Records

When you create a voice record, it is labeled with the time and date it was recorded. You can then rename it with a custom label. From the main menu, select VoiceRecord. Scroll to the voice record you want to label. Press A under Label. Enter the label you want to assign.
5 Press O. 4 Select Lock to lock the message. -orSelect Unlock to unlock the message. When a voice record is locked, this icon R appears next to it.

Deleting Voice Records

To delete a voice record: 1 From the main menu, select VoiceRecord. 2 Scroll to the unlocked voice record you want to delete. 3 Press m. 4 Select Delete. 5 Press O or A under Yes to confirm. To delete all voice records: 5 From the main menu, select VoiceRecord. Scroll to any voice record. Press m. Select Delete All. Press O or A under Yes to confirm.
To view the amount of memory available for voice records: 1 From the main menu, select VoiceRecord. 2 With [New VoiceRec] highlighted, press A under Memory. -orWith any voice record highlighted, press m. Select Memory. To free more memory by deleting all unlocked voice records: 1 From the voice records memory screen, press A under Delete. 2 Press O or A under Yes to confirm. Note: Voice records are stored in your phone using the same memory space used to store messages, Java application data, pictures, ring tones, and wallpaper images. Deleting some of these other items frees memory for voice records.

Locking Voice Records

When you lock a voice record, it cannot be deleted until you unlock it. 1 From the main menu, select VoiceRecord. 2 Scroll to the voice record you want to lock or unlock. 3 Press m.

Customizing Your Phone

Setting the Volume
Of the Earpiece and Speaker 1 From the main menu, select Settings > Volume. 2 Scroll to Earpiece to set the earpiece volume. -orScroll to Speaker to set the speaker volume. 3 To set the volume: Scroll left or right. -orPress the volume controls. Of the Ringer Press the volume controls.
To set your phone to vibrate instead of making a sound when you receive Private calls, group calls, and SDG calls*, even if you want your phone to ring for other features: 1 From the main menu, select Settings > 2-Way Radio > Alert Type. Tip: If Alert Type does not appear: From the main menu, select Ring Tones. Make sure VibeAll is set to Off. Repeat step 1. 2 Select Vibrate to set your phone to vibrate. Tip: Select Silent in step 2 to set your phone to neither vibrate nor make a sound.

Phone Calls Features

The Phone Calls menu controls how your phone handles phone calls: Set Line sets phone line 1 or phone line 2 as the active line for outgoing calls. Any Key Ans If this feature is on, you can answer calls by pressing any key on the keypad. Auto Redial sets your phone to automatically redial calls you make when the system is busy. Call Waiting See Call Waiting on page 46.

2-Way Radio Features

The 2-Way Radio menu controls how your phone handles Private calls, group calls, and SDG calls*: Tkgrp Silent controls whether you hear group calls to your Talkgroup. See Group Calls on page 54. Tkgrp Area lets you define your Talkgroup area.
One Touch PTT See Setting One Touch PTT on page 48. Alert Type controls how your phone notifies you when you receive Private calls, group calls, and SDG calls*.

Personalize Features

The Personalize menu makes main menu items easier to access. Menu Options Reorder Menu lets you change the order of the items on the main menu by grabbing and moving them; Add/Remove Apps lets you create a shortcut to a Java application on the main menu. Up Key sets the main menu item you access when you scroll up from the idle screen. Down Key sets the main menu item you access when you scroll down from the idle screen. Left Key sets the main menu item you access when you scroll left from the idle screen. Right Key sets the main menu item you access when you scroll right from the idle screen.
Center Key sets the main menu item you access when you press O from the idle screen. Left Sftkey sets the main menu item you access when you press the left option key from the idle screen. Right Sftkey sets the main menu item you access when you press the right option key from the idle screen. Power Up sets the main menu item you see when you power on your phone. To set the idle screen to be the first thing you see when you power on your phone, select Default Ready.

Volume Features

The Volume menu sets the volume of sounds your phone makes: Line 1 sets ringer volume for phone line 1. Line 2 sets ringer volume for phone line 2. Messages sets the volume of message notifications and Datebook reminders. Earpiece sets the volume of sound coming out of the earpiece. Speaker sets the volume of sound coming out of the speaker. Keypad sets the volume of sound associated with pressing keys and buttons.

The call filtering setting in each profile lets you control which calls, call alerts, and message notifications your phone notifies you of, and which it ignores. To set call filtering: 1 While setting options for a profile, select Call Filter. 2 To set filtering options for phone calls, select Phone. Off sets your phone to notify you of all phone calls. All sets your phone to ignore all phone calls. All Contacts sets your phone to notify you only of phone calls from numbers stored in Contacts.
On sets your phone to ignore all call alerts. 7 To set filtering options for message notifications, select Notifications. Off sets your phone to notify you of all messages. Voice Messages sets your phone not to sound a tone or vibrate when you receive voice messages. Text Messages sets your phone not to sound a tone or vibrate when you receive text messages. All sets your phone not to sound a tone or vibrate when you receive any message. Note: When you receive a type of message you have set not to sound a tone or vibrate, the message notification screen appears as usual. 8 Press A under Done.

Shortcuts

Shortcuts lets you access most menu options by pressing a number on your keypad (1 through 9) or saying the voice name of the shortcut. You create the shortcut and then use it to take you to that screen any time.

Creating a Shortcut

Note: When you receive your phone, all number keys may already be assigned to shortcuts. If this is the case, you can create new shortcuts by deleting or replacing existing shortcuts. 1 Go to the menu item you want to create a shortcut for. For example, if you want to create a shortcut to the screen for creating a new Contacts entry: From the main menu, select Contacts, then highlight [New Contact]. 2 Press and hold m until a confirmation screen appears. 3 Press O or press A under Yes. 4 Select Key. 5 Press the number key you want to assign to the shortcut.
6 Press O. 7 If you want to record a voice name for the shortcut: Select Voice. As directed by the screen prompts, say and repeat the name you want to assign to the number. Speak clearly into the microphone. 8 Press A under Done. 9 If the number key you chose is already assigned to a shortcut, a prompt appears asking if you want to replace the existing shortcut. Press A under Yes to replace the existing shortcut. -orPress A under No if you want to keep the existing shortcut and assign another number key to the shortcut.

Using a Shortcut

If you know the shortcut number: 1 From the idle screen, press m. 2 On your keypad, press the number assigned to the shortcut. If you do not know the shortcut number: 1 From the main menu, select Shortcuts. 2 Scroll to the shortcut you want to use. -or-
If you assigned a voice name to the shortcut: Press and hold t. Say the voice name into your phone. The shortcut with that voice name is then highlighted. 3 Press O. 4 With Key or Voice highlighted, press O to change assignments.

MOTOROLA, the Stylized M Logo and all other trademarks indicated as such herein are trademarks of Motorola, Inc. Reg. U.S. Pat. & Tm. Off. 2005 Motorola, Inc. All rights reserved. Microsoft and Microsoft Internet Explorer are registered trademarks of Microsoft Corporation. T9 is a trademark owned by Tegic Communications. T9 Text Input Patent and Trademark Information This product is covered by U.S. Pat. 5,818,437, U.S. Pat. 5,953,541, U.S. Pat. 6,011,554 and other patents pending. Java and all other Java-based marks are trademarks or registered trademarks of Sun Microsystems, Inc. in the U.S. and other countries. All other product names or services mentioned in this manual are the property of their respective trademark owners.
Software Copyright Notice The Motorola products described in this manual may include copyrighted Motorola and third party software stored in semiconductor memories or other media. Laws in the United States and other countries preserve for Motorola and third party software providers certain exclusive rights for copyrighted software, such as the exclusive rights to distribute or reproduce the copyrighted software. Accordingly, any copyrighted software contained in the Motorola products may not be modified, reverse-engineered, distributed, or reproduced in any manner to the extent allowed by law. Furthermore, the purchase of the Motorola products shall not be deemed to grant either directly or by implication, estoppel, or otherwise, any license under the copyrights, patents, or patent applications of Motorola or any third party software provider, except for the normal, non-exclusive, royalty-free license to use that arises by operation of law in the sale of a product.

Numerics

2-way radio 108 see also Private calls, group calls, SDG calls, and call alerts 3-way calling 47

Baud rate 111

Call alerts 24 deleting 25 queue 24 receiving 24 responding 24, 25 sending 24 sorting 25 viewing 25 Call filtering 115 Call forwarding 43 all calls 43 missed calls 44 off 44 Call Timers 50 Call Waiting 46 off 46 Calls 3-way 47 answering automatically 108 answering with any key 19, 108 emergency 23
Accessories 17 safety 129 Airplane mode 107 settings 111 turning on and off 107 Alpha mode 65 Antenna 17
Backlight 107 Battery care 5 charging 4, 5 door 3 inserting 4 safety 128
ending 19 entering number 19 from Contacts 20 from Datebook 21 from memo 61 from recent calls 20, 35 group, see Group calls international 48 making 18 on hold 47 phone calls 18 Private calls 18, 22, 108 receiving 19 redialing 21, 108 remote PTT 122 SDG, see SDG calls Speed Dial 21 TTY, see TTY calls Turbo Dial 21 voice name 21 Circuit data 51 Clock 108 Contact information receiving 33