MOTOPURE H15 Universal Flip Bluetooth Headset

MOTOMANUAL

Figure 1

Figure 2

Figure 3

Figure 4

Figure 5

English

European Union Directives Conformance Statement
Hereby, Motorola Inc., declares that this H15 is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC. You can view your products Declaration of Conformity (DoC) to Directive 1999/5/EC (the R&TTE Directive) at www.motorola.com/rtte.
Caring for the Environment by Recycling
When you see this symbol on a Motorola product, do not dispose the product with household waste.
Recycling Mobile Phones and Accessories Do not dispose of mobile phones or electrical accessories, such as chargers or headsets, with your household waste. In some countries or regions, collection systems are set up to handle electrical and electronic waste items. Contact your regional authorities for more details. If collection systems arent available, return unwanted mobile phones or electrical accessories to any Motorola Approved Service Centre in your region.

FCC Notice to Users

Users are not permitted to make changes or modify the device in any way. Changes or modications not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. See47-CFR-Sec.-15.21. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. See-47-CFR-Sec.-15.19(3).

Before you begin

See gure 1 on page 1.
Take a moment before you get started to familiarize yourself with your new H15 Bluetooth Hands-free Headset. Along with your headset, a desktop charger is provided for both charging and storage. Bluetooth headset 1 Call Button 2 Volume Buttons 3 Speaker 4 Multi-color Indicator light 5 Boom Desktop charger 1 Power Indicator light 2 Headset Charging Connector 3 Charger Port

Charging your headset

See gure 2 on page 1.
You need to charge your headset using the included travel charger or desktop charger. Charging with travel charger The indicator light turns red when the battery is charging. It may take up to 1 minute for the indicator light to turn on. When the headsets battery is fully charged (about 2 hours), the indicator light turns green. Note: Headset is NOT functional while charging with travel charger.
Charging with desktop charger The desktop charger light is lit, and the headset indicator light turns red when the battery is charging. It may take up to 1 minute for the headset indicator light to turn on. When the headsets battery is fully charged (about 2 hours), the headset indicator light turns green. Headset is functional while charging on desktop charger with the boom open. When there is an incoming call, simply take headset off the desktop : the call is automatically answered. This product uses a lithium ion, rechargeable, non-replaceable battery. Your battery is designed to last the life of the product. It should only be removed by a recycling facility. ANY ATTEMPT TO REMOVE OR REPLACE YOUR BATTERY WILL DAMAGE THE PRODUCT.

Quick battery check

While your headset is turned on and not on a call, you can check the battery charge level by pressing and holding both Volume buttons. The indicator light displays charge status until you release the buttons. See below for details on indicator light and available talk time based on charge status. Headset Indicator Red Yellow Green Available Talk Time Less than 1 hours From 1 to 3 hours Greater than 3 hours

Wearing your headset

See gure 3 on page 2
Your H15 headset is supplied with multiple ear cushions. Your headsets performance is greatly dependent upon achieving a good t on your ear. Therefore, we recommend trying all the supplied ear cushions with your headset. The ear cushion is tted onto the end of your headsets earpiece speaker and placed onto your ear when using your headset. When tting an oval-shaped ear cushion on your headset, be sure the cushion is pointing towards the microphone. You can wear your H15 headset on your left or right ear. The headset comes ready for the right ear. Placing the headset on your ear: see gure 4 on page 2 Placing the headset on the left ear: see gure 5 on page 2
Turning headset on and off
To turn your headset on, open the headset boom. The indicator light rst ashes blue 3 times, then: a phone), or To turn your headset off, close the headset boom. The indicator light will turn off.

Pairing your headset

Your phones Bluetooth feature is off by default. To use your headset, you must turn on the Bluetooth feature in your phone. Please check your phones users guide. Note : The Bluetooth feature remains on until you turn the feature off. Before you can use your headset, you must pair (link) it with your phone. 1 Ensure headset is in pairing mode Open the headset boom to power on the headset and initiate pairing. After a few moments, the indicator light will be steadily lit in blue to indicate headset is in pairing mode. If the headset does not enter into pairing mode, see Troubleshooting section. 2 Set your phone to look for your headset discovery, consult your phones users guide. The phone lists Bluetooth devices it nds. Motorola H15 in the list of discovered devices and conrm by following the on-screen prompts. 0000 and conrm. Pairing is successful when the headset indicator ashes purple and blue.

Test and use

Your phone and headset are now paired and ready to make and receive calls. To conrm they are successfully paired and operating properly, place the headset over your ear and make a call from your phone. You will hear ringing from the headset. After you have successfully paired your phone and headset, you do not need to repeat these steps each time you use the headset. To conserve power, close the boom to turn your headset off. Re-open the boom to make a call.

Using your headset with a second phone
Multipoint technology allows you to make and receive calls from 2 Bluetooth enabled devices like your personal and business phones. 1 To pair a second phone to your headset, follow these steps :
headset section) 2 To reconnect your headset with your rst phone and thus be connected to both phones :
Your headset automatically connects to both phones. Your most recently paired phone is now your primary phone for voice dial functionality. Use the following tips when using H15s multipoint technology :
- When answering a call, the idle phone is disconnected from the headset. - When the call ends, the idle phone is automatically reconnected to the headset. phone.
- For your primary device (last paired phone), tap the Call button until you hear the tone. - For your secondary device (other paired phone), tap the Call button and either Volume button until you hear the tone.
Using your headset : making and receiving calls
Your headset supports both Hands-free and Headset Proles. Accessing call functions depends upon which prole your phone supports. See your phones users guide for more information. Note: some features are phone/network dependent. Function Answer a call Action Open the boom or tap the call button (if boom is ready open), hear a low-to-high tone End a call Tap the Call button, and hear a high-to-low tone Reject a call Press and hold either Volume button until you hear a tone Redial last call Press and hold the Call button until you hear a tone Make a voice dial call Tap the Call button and speak the name (Primary phone) after the tone Make a voice dial call Tap the Call button and either Volume (Secondary phone) button and speak the name after the tone Answer a second incoming call Press and hold the Call button (places rst call on hold), and hear a tone Reject second incoming call Press and hold either Volume button until you hear a tone Transfer a call from Press both Volume buttons and Call button, the headset to the phone and hear a descending tone Mute or unmute a call Tap both Volume buttons until you hear a mute tone

Indicator lights

With No Charger Plugged In
Headset Indicator Off 3 blue ashes Steady blue Quick blue/purple ashes Quick blue ash Quick purple ash Slow blue pulse Slow blue ash Red ash Slow purple pulse Quick red ash Headset Statuts Power off Powering on/off Pairing mode Pairing successful Incoming call on primary phone Incoming call on secondary phone Connected (on a call) Standby (not on a call) Idle (not connected to phone) Connected call muted Low battery
Note: After 20 minutes on a call or of inactivity, the light stops ashing to conserve power, but the headset remains on. To disable the indicator light, press and hold both Volume buttons while turning headset on. Note : Set your primary and secondary phones to different ring tones to know which phone is ringing when wearing the headset.

With the Charger Plugged In To Travel Charger
Headset Indicator Red Yellow Green Headset Status Battery level less than 50% charge Battery level above 50% charge Charging complete
With the Headset Plugged In to Desktop Charger
Headset Indicator Red Yellow Green Quick blue ash Quick purple ash Headset Status Battery level below than 50% charge Battery level above 50% charge Charging complete Incoming call on primary phone Incoming call on secondary phone

Audio tones

Audio Tone Ring tone Short tone High to low tone 1 short tone when pressing Volume button during a call Ascending tone Low tone (repeated every 15 seconds) Descending tone Low to high tone No audio indications; deteriorating quality 2 tones repeated every minute Headset Status Incoming call Phone network not available End call Volume at minimum or maximum Mute enabled Mute reminder Mute disabled Connection conrmation/voice activation Out of range Low battery

Troubleshooting

My headset will not enter pairing mode Make sure that any devices previously paired with the headset are turned off. If the indicator light is ashing in blue, rst turn off the other device, then close and reopen the headset boom. The indicator light becomes steadily lit in blue indicating the headset is now in pairing mode. My headset will not pair with my phone Open the boom ip. Press and hold both Volume buttons and the Call button for more than 10 seconds. The indicator light ashes blue 3 times and then becomes steadily lit. The headset is now in pairing mode to complete the pairing process. My phone doesnt nd my headset Make sure the indicator light on your headset is on (lit in blue) and steady when your phone is searching for devices. My headset worked before but now its not working Make sure your phone is on and the Bluetooth feature is turned on in your phone.If the Bluetooth feature was turned off or was turned on only temporarily, you may need to restart the Bluetooth feature and pair your phone and headset again.
If you have any additional questions, please call your hotline number (0870-9010-555) or visit us at www.hellomoto.com.

motorola.com

MOTOROLA and the Stylized M Logo are registered in the US Patent & Trademark Ofce. All other product or service names are the property of their respective owners. The Bluetooth trademark and logos are owned by the Bluetooth SIG, Inc. and any use of such marks by Motorola, Inc. is under license. 2008 Motorola, Inc. All rights reserved.
6803578F33 - Printed in the EU.

Bluetooth Product Guide

Winter 2009

MONO HEADSETS

STEREO HEADSETS
OTHER BLUETOOTH ACCESSORIES

Before you begin pairing

Apple Bluetooth Headset
Oracle # 75086 Features & Benefits Includes: iPhone Bluetooth travel cable for convenient syncing and charging Up to 5.5 hours talk time, 72 standby Bluetooth V2.0 with EDR Weight: 6.5 grams

Motorola PURE H12

Item # 83544ATT / Oracle # 71744 Features & Benefits: CrystalTalk echo and noise reduction for clearer calls Up to 5 hours talk time, 200 standby Includes: Magnetic charging stand and carry case/charger Bluetooth V2.1 Weight: 12 grams
Motorola Merlot MotoPure H15
Item # 31120ATT / Oracle # 75170 Features & Benefits RapidConnect, flip microphone with EasyPair Crystal Talk echo/noise reduction MultiPoint technology 15 minute quick charge provides 1 hr. of talk time Up to 5.5 hours talk time, 200 standby Bluetooth V2.0 with EDR Weight: 15 grams

AT&T E220

Item # 82505ATT / Oracle # 71482 Features & Benefits: QuickPair technology Sound channeling earpiece Manufactured by Plantronics Fully charged from the manufacturer Up to 6 hours talk time, 200 standby Bluetooth V2.0 Weight: 15 grams

Jabra BT4010

Item # 31122ATT / Oracle # 75164 Features & Benefits Smart Display for instant information, including battery status Up to 6 hours talk time, 150 standby Includes: Wall charger, USB charging cable and optional ear hook Bluetooth V2.0 with EDR and eSCO Weight: 10 grams

Coming Soon!

Motorola H270
Item # 31123ATT / Oracle # 75180 Features & Benefits: EasyPair, RapidConnect Dedicated on/off button True Comfort ear interface Up to 6 hours talk time, 150 standby Bluetooth V2.1 with EDR Weight: 11 grams

Jabra 8040

Item # 31910ATT / Oracle # 71710 Features & Benefits: MultiPoint technology DSP noise reduction with auto volume control Up to 6 hours talk time, 200 standby Streaming music via Bluetooth and A2DP Weight: 10 grams

Motorola H371

Item # 31913ATT / Oracle # 71703 Features & Benefits: Battery level indicator Includes: Flexible ear hook with 2 ear bud options Up to 6 hours talk time, 150 standby Bluetooth V2.0 Weight: 14 grams

Jawbone II

Item # 30496ATT / Oracle # 75044 Features & Benefits: NoiseAssassin military grade noise cancellation Patented Voice Activity Sensor Includes: Multiple ear hooks and ear buds for optimal comfort and fit Up to 4 hours talk time, 8 days standby Bluetooth V2.0 Weight: 10 grams

Motorola H681

Item # 83385ATT / Oracle # 71686 Features & Benefits: Independent power button EasyPair technology Includes: Magnetic desktop charging dock Up to 7 hours talk time, 200 standby Bluetooth V2.0 Weight: 12 grams
All Bluetooth headsets must be charged before initial pairing. Please refer to your headset and phones users manual for proper pairing instructions.

Motorola H721

Item # 83545ATT / Oracle # 71779 Features & Benefits: Power flip microphone with EasyPair MultiPoint technology DSP noise reduction with auto volume control Up to 6.5 hours talk time, 8 days standby Bluetooth V2.0 Weight: 14 grams

Plantronics Voyager 521

Item # 83495ATT / Oracle # 71699 Features & Benefits: MultiPoint technology Noise canceling microphone Wind Screen for clearer calls outdoors Fully charged from the manufacturer Up to 8 hours talk time, 180 standby Bluetooth V2.0 Weight: 16 grams
Motorola Brushed Metal MotoPure H780
Item # 31121ATT / Oracle # 75163 Features & Benefits EasyPair MultiPoint technology Dual-mic, noise & echo cancellation Up to 6 hours talk time, 200 standby Bluetooth V2.1 with EDR Weight: 11 grams

Plantronics Voyager 835

Item # 31155ATT / Oracle # 75156 Features & Benefits: Dual-mic AudioIQ cancels noise for clear calls Windsmart technology reduces wind noise QuickPair technology MultiPoint technology Up to 5 hours talk time, 7 days standby Bluetooth V2.0 with EDR Weight: 12 grams
Plantronics Discovery 925
Item # 31118ATT / Oracle # 75154 Features & Benefits Equipped with AudioIQ noise control technology for crystal clear calls MultiPoint technology Includes: Charging/carry case with internal battery for additional 5 hours of talk time Up to 5 hours talk time, 7 days standby Bluetooth V2.0 with EDR and eSCO Weight: 8 grams

Samsung WEP301

Item # 31119ATT / Oracle # 75153 Features & Benefits Up to 5 hours talk time, 80 standby Includes: travel adapter, optional ear hook and 6 fashion skins Bluetooth V2.0 Weight: 8.7 grams

Motorola S9

Item # 82351ATT / Oracle # 71485 Features & Benefits: Behind-the-head wearing style offers comfort and stability Music automatically mutes or pauses when receiving a call Water and sweat resistant Up to 7 hours talk time, 6 hours play time, 5 hours standby

Sony DR-BT22

Item # 83504ATT / Oracle # 71697 Features & Benefits: Simple and lightweight design for easy portability Easy transfer between music and phone calls Convenient remote control for basic functions Compatible with A2DP, AVRCP, HFP, and HSP technologies
Pairing: Charge headset at least 2 hours prior to pairing. Press and hold power button until indicator light is solid blue. Headset is now in pairing mode. Refer to handset manual to activate handsets Bluetooth feature.

Pairing: Sony DR-BT22 must be within 3 feet of Bluetooth device. While headset is turned off, press and hold the power button for 7 seconds or more to place headset in pairing mode.
The Bluetooth word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by Superior Communications is under license. Other trademarks and trade names are those of their respective owners.
Altec Lansing T521 Stereo Bluetooth Portable Speaker
Item # 83498ATT / Oracle # 71706 Features & Benefits: Exceptional audio quality powerful enough to fill any room Built-in speakerphone for hands-free conversations Convenient two-way wireless remote control Sleek and compact design Pairing: Press and hold the power button. Once you hear a pair of low/high tones release the power button. A blue light will flash intermittently at which time you should press and hold the phone button once you hear a low/high tone combination. Release the phone button and the light will alternately flash red and blue. The T521 is now in pairing mode.
Motorola T305 Wireless Speaker with EasyPair
Item # 81587ATT / Oracle # 71487 Features & Benefits: Equipped with the latest echo and noise reduction technology Loud sound optimized for the vehicle with high output speaker One convenient multi-function button for multiple operations Hands-free in the car as well as the home/office Up to 9 hours talk time, 200 standby Pairing: Power on car kit by pressing and holding the power button until indicator light becomes steadily lit in purple. Release button and indicator light will be steadily lit in blue to indicate car kit is in pairing mode.

Jabra A320s USB Adapter

Item # 82143ATT / Oracle # 71398 Features & Benefits: Transfer files and pictures Stream music wirelessly Connect your Bluetooth devices to your PC Configuration: Before using the Jabra A320s, driver must be installed on PC. Once driver is installed, connect the A320s to an available USB port. PC will automatically detect the new device. Right-click the Bluetooth icon on the tool bar and follow steps on screen to begin connecting devices.

Motorola T501

Oracle # 71777 Features & Benefits: Bluetooth in-car speakerphone and digital FM transmitter Station Finder locates the best FM connection Audible caller ID announces the incoming phone number DSP noise reduction for clearer calls Works with XM Satellite Radio and AT&T Navigator from the handset Up to 20 hours talk time, 20 days standby Pairing: Turn on T501 by pressing and holding the power button for approximately 3 seconds until the main indicator light flashes and you hear an audible tone sequence. The main indicator light will turn blue to indicate the T501 is in pairing mode. Turn on your phones Bluetooth feature, search for new devices, and select the Motorola T501. If prompted, enter passkey 0000 (four zeros).