BEFORE YOU BEGIN

Before using this product, read the Important Safety and Legal Information pamphlet and follow its instructions.

Your Headset's Battery

CHARGE

START BLUETOOTH FEATURE

Your Headset
H700 Bluetooth Handsfree Headset
Get Connected in 4 Quick Steps
1 - CHARGE 2 - START BLUETOOTH FEATURE 3 - PAIR 4 - TEST AND USE
Take a moment before you get started to familiarize yourself with your new H700 Headset. Multi-Color Indicator Light Boom Microphone Volume Buttons Call Button
Your Phone Your phone's Bluetooth feature is off by default. To use your headset, you must turn on the Bluetooth feature in your phone. For most Motorola phones (at the main menu): (Menu 1 Press M( ) > Settings > Connection >
1 Plug the Motorola charger into the end of
the headset. The indicator light turns red when the battery is charging. It may take up to 1 minute for the indicator light to turn on. When the headset's battery is fully charged (about 2 hours), the indicator light turns green.
Bluetooth Link > Setup.
2 Scroll to Power. 3 Select Change. 4 Scroll to On. 5 Press Select to turn on the Bluetooth
feature. The Bluetooth feature remains on until you turn the feature off.
Note: These steps are for most Motorola phones. For other phones, see your phone's user's guide.
Before you can use your headset, you must pair (link) it with your phone. Step A - PUT THE HEADSET IN PAIRING MODE The headset indicator light will be steadily lit in purple when in pairing mode. To place the headset in pairing mode: If the headset has never been paired with another device, simply open the headset boom. The indicator light becomes steadily lit in purple. If the headset has previously been paired with other devices, first ensure those devices are turned off. Then open the headset boom and the indicator light flashes in blue. After about 5 seconds, the indicator light becomes steadily lit in purple. If the headset does not enter pairing mode, see TROUBLESHOOTING for help.
Speaker (on reverse side)
2 Disconnect the charger.
Note: Headset is not functional while charging.
Motorola, Inc. Consumer Advocacy Office 1307 East Algonquin Road Schaumburg, IL 60196 www.hellomoto.com 1-877-MOTOBLU 1-888-390-6456 (TTY/TDD United States for hearing impaired) Guide Number: 6809499A88-O

PAIR CONTINUED

Your Phone

TEST AND USE

USING YOUR H700
See Features and Functions Guide on the reverse side for information on using your H700.

TROUBLESHOOTING

My headset will not enter pairing mode. Make sure that any devices previously paired with the headset are turned off. If the indicator light is flashing in blue, turn off the other device and wait for 10 seconds. The indicator light becomes steadily lit in purple indicating the headset is now in pairing mode. My phone doesn't find my headset. Make sure the indicator light on your headset is on (lit in purple) and steady when your phone is searching for devices (see step 3). My headset worked before but now it's not working. Make sure your phone is on and the Bluetooth feature is turned on in your phone (see step 2). If the Bluetooth feature was turned off or was turned on only temporarily, you may need to restart the Bluetooth feature (see step 2) and pair your phone and headset again (see step 3). Support. If you need more help, contact us at 1-877-MOTOBLU or visit us at www.hellomoto.com/bluetooth and click Support
Step B - SET YOUR PHONE TO LOOK FOR YOUR HEADSET For most Motorola phones: (Menu 1 On your Motorola phone, press M( ) >
Your phone and headset are now paired and ready to make and receive calls. To make a call:
1 Open the headset boom and place the

headset over your ear.

Settings > Connection > Bluetooth Link > Handsfree > Look for Devices.
2 On the phone, dial the number you want to
call and press SEND key on your phone.
The phone lists Bluetooth devices it finds.
MOTOROLA and the Stylized M Logo are registered in the US Patent & Trademark Office. The use of wireless devices and their accessories may be prohibited or restricted in certain areas. Always obey the laws and regulations on the use of these products. The Bluetooth trademarks are owned by their proprietor and used by Motorola, Inc. under license. All other product or service names are the property of their respective owners. Motorola, Inc. 2005.
2 Select Motorola H700. 3 Select OK or Yes to pair your headset with

your phone.

3 If your phone and headset are successfully
After you have successfully paired your phone and headset, you don't need to repeat these steps. For daily use, ensure that your headset is turned ON and that your phone's Bluetooth feature is ON. To save battery power, turn OFF the headset when you don't use it for an extended time by closing the boom.
paired, you will hear ringing on the headset.
4 Enter the passkey: Select OK.
When your headset successfully pairs with your phone, the indicator light changes from steadily lit to flashing blue.

TURNING ON AND OFF

To turn your headset on, open the headset boom. The indicator light flashes blue if paired with another device, or is steadily lit in purple if ready to be paired. To turn your headset off, close the headset boom. The indicator light will turn off. To conserve battery power, turn off your headset when you don't plan to use it for

WEARING THE HEADSET

1 Open the headset boom, then open the
earhook (45 from the headset).
CHANGING FOR USE ON OTHER EAR
You can wear your H700 headset on your left or right ear. The headset comes ready for the right ear. To change the headset for the left ear:
CHANGING VOLUME BUTTON ORIENTATION
You can also change the orientation of the volume buttons on your headset.
2 Loop the earhook over your ear. 3 Press the headset to your ear. 4 Point the headset boom towards your

mouth.

1 Open the headset boom,
then open the earhook (90 from the headset).
1 Turn the headset power off by closing

the headset boom.

2 Press the Call E button until the
1 Open Earhook 2 Pull Earhook Up
2 Gently lift and pull the
IMPORTANT: Be sure to first follow the Quick Start Guide on the reverse side to complete initial setup of your H700.
top of the earhook up and off the upper hinge pin. Then, pull it away to remove it.
indicator light becomes steadily lit in purple, then press the Volume button you want to assign as the "volume up" button.
3 Flip the headset over. 4 Hook the bottom of the
Multi-Color Indicator Light earhook onto the lower hinge pin, then lift and pull the top of the earhook over the upper hinge pin.

Volume Buttons

Hinge Pin

Call Button

MAKING CALLS
Function Make a voice dial call End a call Receive a call Action Tap the Call button and speak the name after the tone Tap the Call button Open headset boom or tap the Call button (if boom is already open) Press and hold the Call button until you hear a beep Press and hold the Call button until you hear a beep

MAKING CALLS CONTINUED

Function Answer a second incoming call Toggle between two active calls Join a 3-way call Put an active call on hold or resume a call on hold Transfer a call from the phone to the headset Disable the indicator light Mute or unmute a call Action Press and hold the Call button (places first call on hold) Press and hold the Call button Press and hold both Volume buttons Press and hold the Call button until you hear a beep Open headset boom Press and hold both Volume buttons for 3 to 4 seconds Tap both Volume buttons
With the Charger Plugged In Indicator Light Headset Status Red (steady) Charging (less than 80% charged) Yellow (steady) Charging (more than 80% charged) Green (steady) Charging complete With No Charger Plugged In Headset Status Power off Pairing mode/ Volume button orientation Red Battery low Blue (10 rapid flashes) Pairing successful Blue (slow pulse) Connected (on a call) Blue (quick flash) Standby (not on call)
Note: After 5 minutes of inactivity, the light stops flashing to conserve power, but the headset remains in standby mode.

INDICATOR LIGHTS

The audio tones provide information about your headset status. Audio Ton e Single high tone when pressing Volume button Five rapid high tones repeated every 60 sec. No audio indications; deteriorating quality Ring tone Single high tone Single low tone Dual high/low tone Single high tone Low to high tone Two ascending tones Two descending tones Headset Status Volume at minimum or maximum Low battery Out of range Incoming call Pairing confirmation Voice activation Voice tag not recognized End call Phone network not available Mute enabled Mute disabled

AUDIO TONES

Reject a call Redial last call
Indicator Light Off Purple (steady)
Note: Your H700 supports both Handsfree and Headset Profiles. Accessing call functions depends upon which profile your phone supports. See your phone's user's guide for more information.
Note: Some features are phone/network dependent.

motorola Bluetooth Handsfree Headset

BEFORE YOU BEGIN

Before using this product, read the Important Safety and Legal Information pamphlet and follow its instructions.

CHARGE

Your Headset's Battery
Get connected in 4 quick steps.
Motorola, Inc. Consumer Advocacy Office 1307 East Algonquin Road Schaumburg, IL 60196
www.hellomoto.com 1-877-MOTOBLU 1-888-390-6456 (TTY/TDD United States for hearing impaired) Guide Number: 6809504A20-A
MOTOROLA and the Stylized M Logo are registered in the US Patent & Trademark Office. The use of wireless devices and their accessories may be prohibited or restricted in certain areas. Always obey the laws and regulations on the use of these products. The Bluetooth trademarks are owned by their proprietor and used by Motorola, Inc. under license. All other product or service names are the property of their respective owners. Motorola, Inc. 2006.

T F A R D T F A R D

Your Phone Take a moment before you get started to familiarize yourself with your new H670 Headset. Call Button/ Slide Switch Your phone's Bluetooth feature is off by default. To use your headset, you must turn on the Bluetooth feature in your phone. For most Motorola phones (at the main menu): 1 Press M (Menu ) > Settings > Connection > Multi-Color Indicator Light Charging Port 1 Plug the Motorola charger into the end of the headset.

START BLUETOOTH FEATURE

Your Headset
Before you can use your headset, you must pair (link) it with your phone. Step A - ENSURE HEADSET IS IN PAIRING MODE Power on headset by sliding the Call button towards the microphone to initiate easy pairing. After a few moments, the indicator light will be steadily lit in blue to indicate headset is in pairing mode.
Bluetooth Link > Setup.

Volume Buttons

2 Scroll to Power. 3 Select Change. 4 Scroll to On.

Microphone

The indicator light turns red when the battery is charging. It may take up to 1 minute for the indicator light to turn on. When the headset's battery is fully charged (about 2 hours), the indicator light turns off.
Speaker (on reverse side)
2 Disconnect the charger.
5 Press Select to turn on the Bluetooth
feature. The Bluetooth feature remains on until you turn the feature off.
Indicator Light (steadily blue for pairing mode)
Note: Headset is not functional while charging.
Note: These steps are for most Motorola phones. For other phones, see your phone's user's guide.
If the headset does not enter pairing mode, see TROUBLESHOOTING for help.

PAIR CONTINUED

Your Phone

TEST AND USE

USING YOUR H670
See Features and Functions Guide on the reverse side for information on using your H670

TROUBLESHOOTING

Step B - SET YOUR PHONE TO LOOK FOR YOUR HEADSET For most Motorola phones:
Your phone and headset are now paired and ready to make and receive calls. To make a call:
1 On your Motorola phone, press M (Menu ) >
Settings > Connection > Bluetooth Link > Handsfree > Look for Devices.
The phone lists Bluetooth devices it finds.
1 Place the headset over your ear.
2 On the phone, dial the number you want to
call and press SEND key on your phone.
your phone. 4 Enter the passkey: Select OK.
2 Select Motorola H670. 3 Select OK or Yes to pair your headset with
3 If your phone and headset are successfully
After you have successfully paired your phone and headset, you don't need to repeat these steps. For daily use, ensure that your headset is turned ON and that your phone's Bluetooth feature is ON. To save battery power, turn OFF the headset when you don't use it for an extended time by sliding the switch towards the charging plug.
paired, you will hear ringing on the headset.
My headset will not enter pairing mode. Make sure that any devices previously paired with the headset are turned off. If the indicator light is not steadily lit in blue, turn off both the other device and headset, wait 10 seconds, then turn headset back on. Wait for the indicator light to become steadily lit in blue, indicating the headset is now in pairing mode. My phone doesn't find my headset. Make sure the indicator light on your headset is on (lit in blue) and steady when your phone is searching for devices (see step 3). My headset worked before but now it's not working. Make sure your phone is on and the Bluetooth feature is turned on in your phone (see step 2). If the Bluetooth feature was turned off or was turned on only temporarily, you may need to restart the Bluetooth feature (see step 2) and pair your phone and headset again (see step 3). Support. If you need more help, contact us at 1-877-MOTOBLU or visit us at www.hellomoto.com/Bluetoothsupport

When your headset successfully pairs and connects with your phone, the indicator light changes from steadily lit to flashing blue.
Note: If desired, your headset can be restored to original factory settings. This action will erase all pairing information stored in your headset. Thus, you will need to pair your phone and headset again (see step 3). To restore your headset to original factory settings, press and hold both Volume buttons and the Call button at the same time for 10 seconds.
Features and Functions Guide
H670 Bluetooth Handsfree Headset
TURNING HEADSET ON AND OFF
To turn your headset on, slide the switch toward the microphone. The indicator light is steadily purple for several seconds, then flashes blue (if paired and connected with another device) or is steadily blue (if ready to be paired). To turn your headset off, slide the switch toward the charging plug. The indicator light will turn off. Slide Switch
EARHOOKS AND YOUR HEADSET
Your H670 headset is supplied with multiple earhooks. The earhook is attached onto a hinge pin, and is placed onto your ear when using your headset. To install an earhook on your headset:

WEARING THE HEADSET

Once you have attached your desired earhook, follow these steps to wear your headset on your ear:
CHANGING VOLUME BUTTON ORIENTATION
You can also change the orientation of the volume buttons on your headset.

1 Open the attached

1 Turn the headset power off. 2 Press and hold the Volume button you
want to assign as the "volume up" button and slide the switch toward the microphone. The indicator light is either steadily lit or flashing in blue.
earhook 90 degrees from the headset. top of the earhook up and off the upper hinge pin. Then, pull it away to remove it. right or left ear use (right ear use is displayed). earhook onto the lower hinge pin, then lift and pull the top of the earhook over the upper hinge pin.
earhook 45 degrees from the headset. your ear.
IMPORTANT: Be sure to first follow the Quick Start Guide on the reverse side of this guide to complete initial setup of your H670.
European Union Directives Conformance Statement
Hereby, Motorola declares that this product is in compliance with: The essential requirements and other relevant provisions of Directive 1999/5/EC. All other relevant EU Directives.
2 Gently lift and pull the

2 Loop the earhook over

1 Open Earhook 2 Pull Earhook Up Hinge Pin
3 Press earhook to your ear.
When worn, your headset will look like this on your head:
3 Position the headset for 4 Hook the bottom of the

Indicator Light

Slide Switch

MAKING CALLS

Function Receive a call Mute or unmute a call Reject a call Action Tap the Call button Tap both Volume buttons Press and hold a Volume button until you hear two ascending tones Tap the Call button Press and hold the Call button until you hear two ascending tones Tap the Call button and speak the name after the tone

MAKING CALLS CONTINUED

Function Answer a second incoming call End an active call and resume a call on hold Disable the indicator light Action Tap the Call button Tap the Call button First slide the switch toward charging plug (to turn headset off), then press and hold both Volume buttons AND slide the switch towards the microphone (to turn headset on)
With the Charger Plugged In Headset Indicator Headset Status Steady red Charging Off Charging complete With No Charger Plugged In Headset Indicator Headset Status Off Power off Steady purple Powering up Steady blue Pairing/connection mode 10 rapid purple flashes Connection successful Slow blue flash Standby (not on call) Quick blue flash Incoming call Slow blue pulse Connected (on a call) Slow purple pulse Connected (on a muted call) Red flash Idle (not connected) Quick red flash Low battery
Note: After 30 minutes of inactivity, the light stops flashing to conserve power, but the headset remains in standby mode.

INDICATOR LIGHTS

AUDIO TONES
Audio Tone Ring tone Single high tone High to low tone Single high tone when pressing volume button Two ascending tones Two descending tones Low to high tone No audio indications; deteriorating quality Two tones repeated every 60 sec. Headset Status Incoming call Pairing confirmation End call / phone network not available Volume at minimum or maximum Mute enabled Mute disabled Voice activation Out of range Low battery

End a call

Product Approval Number

Redial last call

The above gives an example of a typical Product Approval Number. You can view your products Declaration of Conformity (DoC) to Directive 1999/5/EC (to R&TTE Directive) at www.motorola.com/rtte. To find your DoC, enter the product Approval Number from your products label in the Search bar on the web site.

Make a voice dial call

Note: Some features are phone/network dependent.
Note: Your H670 supports both Handsfree and Headset Profiles. Accessing call functions depends upon which profile your phone supports. See your phone's user's guide for more information.