USE THE HT820
Before using this product, read the Important Safety and Legal Information pamphlet and follow its instructions.

Your Headphones' Battery

CHARGE
Start Here > > >
HT820 Bluetooth Stereo Headphones
You can use your HT820 headphones simultaneously with a Bluetooth A2DP enabled audio device and your Bluetooth cell phones! Listen to music, hear a beep, and transfer to take the call on the headphones. Hang up the call with a push of a button and your music automically continues playing.
Any Bluetooth Enabled Audio Device* HT820
Before using your HT820 for the first time, charge the headphones for 2 hours:
Charger Insert Charger Here Music Button Indicator Light (Right Side)
Before you can use your headphones with a Bluetooth enabled product, you must pair it with that product. To pair:
Your Headphones & Audio Device Your headphones are successfully paired with a device and ready to use when the blue indicator lights changes from steadily lit, flashes rapidly, and then slowly flashes. To confirm they are operating properly:

TEST AND USE

1 Make sure your headphones are turned off
1 Plug the Motorola charger into the
(see Turning On and Off ) and press and hold the left side Call m button for 6 seconds until the indicator light turns on and remains steadily lit.
Call Button with Indicator Light (Left Side)
1 Place the headphones on your head. See
Wear the Headphones in this guide.

Bluetooth Enabled Phone

headphones. The indicator light turns on when the battery is charging. When the headphones' battery is fully charged, the indicator light turns off.
2 Start playing music on the audio device. If
your headphones are successfully paired, you will hear music in the headphones.
Note: You may need to wait several seconds before hearing music in the headphones while the devices connect.
2 Disconnect the charger.
Note: Headphones do not function while charging.
2 Next, put your Bluetooth Enabled audio

Ready to make it work?

device in pairing mode so the devices can "talk" to each other. For details about putting Bluetooth Enabled devices in pairing mode, refer to the device's User's Guide for directions.
- Charge your Headphones for 2 Hours (CHARGE) - Pair headphones & audio device (PAIR) - Pair phone & headphones (back side of this guide) - Listen to music and take calls!
*The Bluetooth Enabled Audio Device must be A2DP compatible
You can also use a Motorola Original Vehicle Power Adapter to charge your headphones while in your vehicle. A fully charged battery provides approximately: 14 hrs of music listening, 17 hrs of talk time, or 500 hrs of standby time.
See Music Controls for information about using the HT820 volume and playback controls. After successfully pairing, you do not need to repeat these initial setup steps each time you use the headphones. Just power on both devices and they automatically connect.
Note: To pair the headphones with your phone, see "Pair with your Phone," on the reverse side of this guide.
Motorola, Inc. Consumer Advocacy Office 1307 East Algonquin Road Schaumburg, IL 60196 USA www.hellomoto.com 1-877-MOTOBLU 1-800-331-6456 (United States) 1-888-390-6456 (TTY/TDD United States for hearing impaired) 1-800-461-4575 (Canada)

TURN ON AND OFF

To turn your headphones on, press and hold the left side Call m button until the indicator light flashes 3 times (about 3 seconds). Then, release the button. To turn your headphones off, press and hold the left side Call m button until the indicator light flashes rapidly and then turns off (about 3 seconds). To conserve battery power, turn off the headphones when you will not be using it.

CONNECT SIMULTANEOUSLY

Simultaneous connect your headphones with a music device AND your phone! Pair the headphones to the music device (PAIR). Then pair the headset with your phone (backside of guide). Power your headphones off and then back on. After a few moments it will connect with both the music device and phone.
Any Bluetooth Enabled Audio Device*

Call Button Indicator

MUSIC CONTROLS

Left Side

Volume

Buttons

TROUBLESHOOTING
Are you having sound interruption or connection issues?

Right Side

Skip Reverse Skip Forward Headphone Jack Music Button

WEAR THE HEADPHONES

6809496A47-A
MOTOROLA and the Stylized M Logo are registered in the US Patent & Trademark Office. The Bluetooth trademarks are owned by their proprietor and used by Motorola, Inc. under license. All other product or service names are the property of their respective owners. Motorola, Inc. 2005.

Your headphones are designed to be worn comfortably with the neck band positioned behind your head. The microphone is located in the right ear-piece. Digital Signal processing is used for clear pickup of your voice during voice calls.
Note: The remote control functions only work when the headphones are directly connected to source device. via Bluetooth.
To adjust the volume, press the + or - buttons on the left side of your headphones. To Skip Back to the previous song: Press the Skip Reverse Button < on the right side of your headset. To Skip forward to the next song: Press the Skip Forward Button > To Play, Pause, or Stop music: Press the Music Button M to play, pause, or stop the music. To connect non-Bluetooth Devices to your headphones: Use the headphone jack and the included cable.
Bluetooth as a wireless technology could be subject to interference of other wireless traffic existing in your environment. Try turning your headphone off and back on. This automatically resets the connection. If you experience audio interruptions while the headphone is connected to both music source and a Bluetooth phone, disconnecting the phone will eliminate the audio interruptions.
Support. If you need more help, contact us at 1-877-MOTOBLU or visit us at www.hellomoto.com/bluetooth and click Support.
Features and Functions Guide

PAIR with YOUR PHONE

START BLUETOOTH Feature
PUT HEADPHONES IN PAIRING
Make sure your headphones are turned off. If your headset is on, turn it off by pressing and holding the left side Call m button until the indicator light flashes 3 times (about 3 seconds).
Music Button with Indicator Light (Right Side)
Step B SET THE PHONE TO LOOK FOR YOUR HEADPHONES
For most Motorola phones:
Your Headphones & Phone
Your phone's Bluetooth feature is off by default. So, to use your headset, you must turn on the Bluetooth feature in your phone. For most Motorola phones: 1 Select M (Menu ) > Settings > Connection >
1 Select M (Menu ) > Settings > Connection >
Bluetooth Link > Handsfree > Look for Devices.
The phone lists all Bluetooth devices it finds. 2 Select Motorola HT820. device. 4 Enter the passkey 0000 and press OK. Note: Passkey cannot be changed from 0000.

Your phone and headphones are now paired and ready to make and receive calls. To confirm they are operating properly, make a call:
1 Place the headphones over your ear. See
Wear the Headset on the reverse side of this guide. to call and press the Send key.
Bluetooth Link > Setup.
3 Press OK or Yes to pair (link) the handsfree
2 On your phone, dial the number you want 3 If your phone and headphones are
successfully paired, you will hear ringing in the headphones.
IMPORTANT: Be sure to first follow the Quick Start Guide on the reverse side of this guide to complete initial setup of your HT820.
FOR MORE INFORMATION ON USING YOUR MOTOROLA HT820 Visit us at www.hellomoto.com/bluetooth and click Support. SUPPORT If you need more help, contact us at 1-877-MOTOBLU.
2 Scroll to Power. 3 Press Change. 4 Scroll to On. 5 Press Select to turn on the Bluetooth
feature. Bluetooth feature remains on until you turn it off.
Note: These steps are for most Motorola phones. For other phones, see your phone's user's guide.
When your headphones are successfully paired with your phone, the blue indicator light rapidly flashes and then resumes regular flashing.
Note: For more details, see "Pair," Step 1 on the reverse side of this guide.
See Make Calls for details regarding answering and ending calls using the headset. After you have successfully paired your phone and headphones, you do not need to repeat these initial setup steps each time you use the headphones. Just turn the power on and they will automatically connect.

MAKE CALLS

Function Make a voice dial call Action Short press left m button & speak the name after the tone Short press left m button Short press left m button Long press left m button until ringing stops. Call ignored. Long press left m button Press and hold the Call button (places first call on hold)

MAKE CALLS CONTINUED

Function Use Call Waiting Action Long press left m button, 1st call put on hold. 2nd call becomes active. Press both volume buttons + at the same time. Both calls become active. Long press left m button Press the volume buttons + at the same time. Press either the + or the to unmute the mic.

INDICATOR LIGHTS

The indicator light provides information about your headphone status. With the Charger Plugged In Headphone Indicator Status On (steady) Charging Off Charging complete With No Charger Plugged In Headphone Indicator Off On (steady) 10 rapid flashes Slow pulse

AUDIO TONES

The audio tones provide information about your headphone status. Audio Tone Single high tone when pressing volume button Five rapid high tones repeated every 60 sec. No audio indications; deteriorating quality Ring tone Single high tone Single low tone Dual high/low tone Single high tone Low to high tone Two tones Single tone Headphone Status Volume at minimum or maximum Low battery Out of range Incoming call Pairing confirmation Voice activation Voice tag not recognized End call Phone network not available Mute on / off Power on / off

End a call Receive a call Reject a call
Join a 3-way call (Note: Feature is phone/ network dependent.)
Redial last call Answer a second incoming call
This symbol on a Motorola product means the product should not be disposed of with household waste. Please do not dispose of mobile telephones or electric accessories, such as chargers or headsets, with your household waste.
Put an active call on hold or resume a call on hold Mute a call
Status Power off Pairing mode Pairing successful Connected
Note: Your HT820 supports both Handsfree and Headset Profiles. Accessing call functions depends upon which profile your phone supports. See your phone's user's guide for more information.

Unmute a call

To turn off the indicator lights, press both < and > at the same time. To turn the indicator lights back on, press both <and > at the same time.

Before using this product, read the Important Safety and Legal Information pamphlet and follow its instructions.
Follow the numbered steps to connect and use a Motorola Bluetooth DC800 Home Stereo Adapter.

AUDIO CONNECTIONS

POWER CONNECTIONS
Make the following audio connections to your stereo adapter (using the supplied cables): Audio Out Jacks Audio In Jacks
Make the following power connection to your stereo adapter:
Enable your gateway to transmit music to your Bluetooth wireless headphone:
PAIR WITH BLUETOOTH HEADSET
DC800 Bluetooth Home Stereo Adapter
Get Connected in 5 Quick Steps
1 - 2 CONNECT 3 - 4 PAIR 5 TEST AND USE
Note: The DC800 Home Stereo Adapter is a Class 1 Bluetooth device. Bluetooth features and Bluetooth Class 1 power levels are not allowed for outdoor operation in France. To avoid unlawful interference with radio signals, do not use the Bluetooth features in France unless you are indoors. Note: To operate with the DC800 Home Stereo Adapter, your Bluetooth audio device must support A2DP Profile capability. Note: To maintain compliance with RF exposure guidelines, you must keep the DC800 Home Stereo Adapter at least 20 centimeters (8 inches) away from any person.
Note: This guide does not provide steps for pairing your gateway with a Bluetooth USB PC Adapter or a Bluetoothenabled PC. Consult the USB Adapter or PC's user guide for details on completing this step.
1 Holding your headphone close to the

Power Jack

1 Connect the Audio Out jacks on the stereo adapter to unused Audio In jacks on your home stereo system. 2 Connect the Audio In jacks on the stereo
adapter to unused Audio Out jacks (such as Tape Out) on your home stereo system.
gateway, place the headset into pairing mode.
1 Plug the included AC power supply into
the Power Jack on the stereo adapter. into a wall outlet.
2 Plug the other end of the AC power supply
Note: If your home stereo does not support Line Out audio, you may have to connect through the headphone jack with the included RCA-to-headphone cable. Note: To stream music from your phone (when equipped with 2.5mm stereo output jack), use the included RCA-to2.5mm cable to connect to the adapter's Audio In jacks.
If using the Motorola HT820 Bluetooth Stereo Headphone, place in pairing mode by pressing and holding the headphone's Call button for approximately 6 seconds until the indicator light is solidly lit. For other products, refer to your headset's user's guide for details.
2 Turn on the stereo adapter by pressing in
the Power button. After a few moments, the Pairing Button indicator light begins blinking to indicate the power is on.
Motorola, Inc. Consumer Advocacy Office 1307 East Algonquin Road Schaumburg, IL 60196 USA www.hellomoto.com 1-877-MOTOBLU 1-800-331-6456 (United States) 1-888-390-6456 (TTY/TDD United States for hearing impaired) 1-800-461-4575 (Canada) Part Number: 6809494A97-B
MOTOROLA and the Stylized M Logo are registered in the US Patent & Trademark Office. The Bluetooth trademarks are owned by their proprietor and used by Motorola, Inc. under license. All other product or service names are the property of their respective owners. The use of wireless devices and their accessories may be prohibited or restricted in certain areas. Always obey the laws and regulations on the use of these products.

CONTINUED

Enable your stereo adapter to receive music from the built-in MP3 player of your Bluetooth A2DP-capable phone:
Note: These steps are for most Motorola phones. Certain phones require additional steps to enable stereo audio streaming (A2DP Profile). See your phone's user's guide to verify proper steps.

PAIR WITH BLUETOOTH PHONE
USE 5 VerifyTEST AND and stereo the headphone

adapter work together:

TROUBLESHOOTING
My stereo adapter doesn't find my headphone. Make sure the headphone is close to the stereo adapter and in pairing mode, and the Pairing button indicator light on your stereo adapter is on and steady (see step 3). My stereo adapter worked with my phone before but now it's not working. Make sure your phone is on and the Bluetooth feature is turned on in your phone. If the Bluetooth feature was turned off or was turned on only temporarily, you may need to restart the Bluetooth feature and pair your phone and stereo adapter again (see step 4). Support. If you need more help, contact us at 1- 877-MOTOBLU. FOR DETAILS ABOUT YOUR STEREO ADAPTER visit us at www.hellomoto.com/bluetooth and click Support.
On your home stereo system, play music from your favorite source and turn the stereo receiver to that source. Place the headphone on your head. If your stereo adapter and headphone are successfully paired, you will hear music on the headphone. To verify the phone and stereo adapter work together:
1 Turn on the stereo adapter by pressing in the
Pairing Button with Indicator Light Power Button Power button. After a few moments, the Pairing button indicator light begins blinking to indicate the power is on.
3 Press and hold the Pairing button on the
stereo adapter until the indicator light remains solidly lit (about 5 seconds). The stereo adapter searches for Bluetooth devices. When the stereo adapter finds the headphone, the indicator light rapidly flashes indicating that pairing is successful. Once the connection is established, the indicator light changes to a slower, pulsing light.
2 From the phone, perform a Bluetooth device
The phone lists Bluetooth devices it finds.
discovery while holding it close to the adapter.
3 Select Motorola DC800. 4 Select OK or Yes to pair your stereo adapter
and phone. 5 Enter the passkey: 0000
On your phone, select and play MP3 music. On your home stereo system, select the input the adapter is connected to. If your stereo adapter and phone are successfully paired, you will hear the MP3 music on your home stereo system.
6 Select OK. The Pairing button indicator light

Motorola, Inc. 2005.

flashes rapidly to indicate pairing is successful.

FEATURES

Your DC800 Home Stereo Adapter connects to your home audio system and turns it into a wireless music system. With your DC800, you can: q Listen to music from your Bluetooth phone's built-in MP3 player over your home audio system speakers (for phones that support streaming stereo music over Bluetooth using A2DP profile). q Play music on your home audio system and send the music wirelessly to your Motorola Bluetooth Stereo Headphone. q Use the stereo adapter's high power Bluetooth (Class 1) with other Class 1 devices to roam around your house further than the 30 foot range of most Bluetooth products.

FEATURES CONTINUED

q Play MP3s from your home computer or laptop and listen to them over your home audio speakers using the Motorola Stereo PC Adapter or embedded Bluetooth module. q Use your stereo adapter with any Bluetooth stereo audio device, even products from other manufacturers.

FRONT PANEL CONTROLS

The DC800 Home Stereo Adapter contains the following front panel controls and indicators.

BACK PANEL CONNECTORS

The DC800 Home Stereo Adapter contains the following back panel connectors.
Audio Out Jacks Housing Feet Power Button
IMPORTANT: Be sure to first follow the Quick Start Guide on the reverse side to complete initial setup of your DC800.
Audio In Jacks Power Jack
Pairing Button with Indicator Light
Housing feet are built-in and can be rotated 90 degress allowing the stereo adapter to stand vertically. For horizontal orientation, the feet remain flush for compact storage.
OPERATING WITH BLUETOOTH DEVICES
Once paired with a Bluetooth device, the stereo adapter automatically connects to the device when it is in range and turned on. The DC800 Home Stereo Adapter stores pairing information for up to eight Bluetooth devices. Device IDs are stored in the gateway's memory in the order entered. If you try to pair with more than eight devices, the oldest paired device is removed from memory.

DC800 FUNCTIONS

Function Turn On DC800 Action Press in the Power button. The DC800 attempts to connect to the last device it was connected to. Press and hold the Pairing button until the indicator light remains solidly lit (about 5 seconds). The DC800 scans for Bluetooth devices.
The Pairing button indicator light provides status information about your DC800. Indicator Light Off On (steady) 10 rapid flashes Slow pulse Quick flash Status Power off Pairing mode Pairing successful Connected (music playing) Standby (not music playing)

INDICATOR LIGHTS

For additional assistance visit our website at: www.hellomoto.com/bluetooth or call Motorola Help desk at: 1-877-MOTOBLU (1-877-668-6258)

Enter Pairing Mode

When you see this symbol on a Motorola product, do not dispose the product with household waste. Recycling Mobile Phones and Accessories Do not dispose of mobile phones or electrical accessories, such as chargers or headsets, with your household waste. In some countries or regions, collection systems are set up to handle electrical and electronic waste items. Contact your regional authorities for more details. If collection systems aren't available, return unwanted mobile phones or electrical accessories to any Motorola Approved Service Centre in your region.
Stop Audio Transmission Tap Pairing button. (audio is transmitting) Reenable Audio Transmission Turn Off DC800 Tap Pairing button. Indicator light blinks with a slow pulse. Press the Power button.