Motorola Surfboard Cable Modem SB5102
Here you can find all about Motorola Surfboard Cable Modem SB5102 like manual and other informations. For example: review.
Motorola Surfboard Cable Modem SB5102 manual (user guide) is ready to download for free.
On the bottom of page users can write a review. If you own a Motorola Surfboard Cable Modem SB5102 please write about it to help other people. [ Report abuse or wrong photo | Share your Motorola Surfboard Cable Modem SB5102 photo ]
Motorola Surfboard Cable Modem SB5102, size: 1.3 MB
Motorola Surfboard Cable Modem SB5102 Warranty
Motorola Surfboard Cable Modem SB5102 Quick Start
Motorola Surfboard Cable Modem SB5102
User reviews and opinions
|eugen||10:43am on Tuesday, November 2nd, 2010|
|"I have had this modem for 8 months now with no problems with it. It has been on every since I hooked it up. "I owned this modem for a number of years and it never gave me any issues what so ever. Its very reliable, and very fast. "nice modem...no connection issues...i actually think it connects faster than linksys used to...|
|Doris Robinson||3:33pm on Saturday, September 18th, 2010|
|Excellent product and fast delivery I bought this to provide my internet through the cable system. It works like a dream. SB5101U with Comcast A Comcast Tech installed the modem when hooking up TV and internet service in the middle of September. Motorola Cable Modem I have one Motorola Cable modem, so I purchased another. They work quite well.|
|bish||8:48am on Saturday, August 21st, 2010|
|"Simply the best cable modem on the market. I have Time Warner cable RoadRunner Turbo and consistently see download speeds approaching 20mbits/sec.|
|megalon||6:30am on Monday, June 7th, 2010|
|Good Modem I have Comcast and this works great with it, and saves me the monthly $5 rent from comcast on the modem.|
|germainiac||3:38am on Monday, April 26th, 2010|
|Finally got around to installing and...the modem was inoperable. The Comcast install tech will have to register this, so it will not work until then, but the process takes only a few minutes Great deal. Only had to make a quick call to my cable company to update with a new MAC address and I was on my way. Easy to set up and fast None so far|
Comments posted on www.ps2netdrivers.net are solely the views and opinions of the people posting them and do not necessarily reflect the views or opinions of us.
Title SB5102 Cable Modem User Guide
Click your selection (there is a complete Contents on page vii):
Introduces your SB5102 cable modem and the controls on the Front Panel and Rear Panel.
Motorola SB5102 Cable Modem
Before You Begin
Lists the items needed to install your SB5102 cable modem and describes Precautions, Signing Up for Service, and Computer System Requirements.
Installation and Configuration Overview
Provides an overview and links for cabling and configuring your SB5102 cable modem.
Provides suggestions to fix common problems.
Provides contact information.
Frequently Asked Questions
Provides answers to common questions about the SB5102 cable modem.
SAFETY AND REGULATORY INFORMATION WARNING: TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS DEVICE TO RAIN OR MOISTURE. THE DEVICE SHALL NOT BE EXPOSED TO DRIPPING OR SPLASHING AND NO OBJECTS FILLED WITH LIQUIDS, SUCH AS VASES, SHALL BE PLACED ON THE DEVICE. CAUTION: TO ENSURE REGULATORY AND SAFETY COMPLIANCE, USE ONLY THE PROVIDED POWER AND INTERFACE CABLES. TO PREVENT ELECTRICAL SHOCK, DO NOT USE THIS PLUG WITH AN EXTENSION CORD, RECEPTACLE, OR OTHER OUTLET UNLESS THE BLADES CAN BE FULLY INSERTED TO PREVENT BLADE EXPOSURE. CAUTION: DO NOT OPEN THE UNIT. DO NOT PERFORM ANY SERVICING OTHER THAN THAT CONTAINED IN THE INSTALLATION AND TROUBLESHOOTING INSTRUCTIONS UNLESS YOU ARE QUALIFIED TO DO SO. REFER ALL SERVICING TO QUALIFIED SERVICE PERSONNEL. CAUTION: Changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate the Equipment. It is recommended that the customer install an AC surge arrestor in the AC outlet to which this device is connected. This is to avoid damaging the equipment by local lightning strikes and other electrical surges. This product was qualified under test conditions that included the use of the supplied cable between system components. To be in compliance with regulations, the user must use this cable and install it properly. Different types of cord sets may be used for connections to the main supply circuit. Use only a main line cord that complies with all applicable product safety requirements of the country of use. Installation of this product must be in accordance with national wiring codes. To prevent overheating, do not block the ventilation holes on the sides of the cable modem. Wipe the cable modem with a clean, dry cloth. Never use cleaning fluid or similar chemicals. Do not spray cleaners directly on the unit or use forced air to remove dust.
SB5102 Cable Modem User Guide
This device must be installed and used in strict accordance with the manufacturers instructions as described in the user documentation that comes with the product. Be sure that the outside cable system is grounded, so as to provide some protection against voltage surges and built-up static charges. Article 820-40 of the NEC (Section 54, Part I of the Canadian Electrical Code) provides guidelines for proper grounding and, in particular, specifies the CATV cable ground shall be connected in the grounding system of the building, as close to the point of cable entry as practical. Caring for the Environment by Recycling
When you see this symbol on a Motorola product, do not dispose of the product with residential or commercial waste. Recycling your Motorola Equipment Please do not dispose of this product with your residential or commercial waste. Some countries or regions, such as the European Union, have set up systems to collect and recycle electrical and electronic waste items. Contact your local authorities for information about practices established for your region. If collection systems are not available, call Motorola Customer Service for assistance.
REGULATORY INFORMATION FCC Declaration of Conformity According to 47CFR, Parts 2 and 15 for Class B Personal Computers and Peripherals; and/or CPU Boards and Power Supplies used with Class B Personal Computers, Motorola, Inc. Connected Home Solutions, 101 Tournament Drive, Horsham, PA 19044, 1-215-323-1000, declares under sole responsibility that the product identifies with 47CFR Part 2 and 15 of the FCC Rules as a Class B digital device. Each product marketed is identical to the representative unit tested and found to be compliant with the standards. Records maintained continue to reflect the equipment being produced can be expected to be within the variation accepted, due to quantity production and testing on a statistical basis as required by 47CFR 2.909. The above named party is responsible for ensuring that the equipment complies with the standards of 47CFR, Parts 2 and 15. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
Canada - Industry Canada (IC) This Class B digital device complies with Canadian ICES-003. Cet appareil numrique de la classe B est conforme la norme NMB-003 du Canada.
This product is provided with a separate a separate Regulatory, Safety, Software License, and Warranty Information card. If one is not provided with this product, please ask your service provider or point-of-purchase representative, as the case may be.
THIS PRODUCT IS IN COMPLIANCE WITH ONE OR MORE OF THE STANDARDS LISTED ON THE REGULATORY, SAFETY, SOFTWARE LICENSE, AND WARRANTY INFORMATION CARD. NOT ALL STANDARDS APPLY TO ALL MODELS. NO WARRANTIES OF ANY KIND ARE PROVIDED BY MOTOROLA WITH RESPECT TO THIS PRODUCT, EXCEPT AS STATED ON THE REGULATORY, SAFETY, SOFTWARE LICENSE, AND WARRANTY INFORMATION CARD. MOTOROLAS WARRANTIES DO NOT APPLY TO PRODUCT THAT HAS BEEN REFURBISHED OR REISSUED BY YOUR SERVICE PROVIDER.
Copyright 2006 by Motorola, Inc. All rights reserved. No part of this publication may be reproduced in any form or by any means or used to make any derivative work (such as translation, transformation or adaptation) without written permission from Motorola, Inc. Motorola reserves the right to revise this publication and to make changes in content from time to time without obligation on the part of Motorola to provide notification of such revision or change. Motorola provides this guide without warranty of any kind, either implied or expressed, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose. Motorola may make improvements or changes in the product(s) described in this manual at any time. MOTOROLA and the Stylized M Logo are registered in the US Patent & Trademark Office. Microsoft, Windows, and Windows Me are registered trademarks and Windows XP is a trademark of Microsoft Corporation. Microsoft Windows screen shots are used by permission of Microsoft Corporation. Macintosh is a registered trademark of Apple Computer, Inc. Navigator is a registered trademark of Netscape Communications Corporation. UNIX is a registered trademark of the Open Group in the United States and other countries. Linux is a registered trademark of Linus Torvalds. All other product or service names are the property of their respective owners. Motorola, Inc. 2006.
Introduction..... 1 Front Panel..... 2 Rear Panel..... 3 Before You Begin..... 4 Precautions..... 5 Signing Up for Service.... 6 Computer System Requirements.... 7 Ethernet Card..... 7 Installation and Configuration Overview... 8 Cabling and Startup for a Single User.... 9 Configuring TCP/IP.... 11 Configuring TCP/IP in Windows 98, Windows 98 SE, or Windows Me.. 12 Configuring TCP/IP in Windows 2000... 15 Configuring TCP/IP in Windows XP.... 19 Verifying the IP Address.... 25 Verifying the IP Address in Windows 98, Windows 98 SE, or Windows Me.. 26 Verifying the IP Address in Windows 2000 or Windows XP.. 27 Renewing Your IP Address..... 28 Cabling for Multiple Users.... 29
Troubleshooting..... 30 Front-Panel Lights and Error Conditions... 32 Contact Us..... 33 Frequently Asked Questions.... 34 Glossary..... 36 Software License.... 38
Installation & Configuration
Unlike dial-up modems or ISDN, youre always on, always connected. Congratulations, you have a new Motorola SB5102 cable modem. It provides high-speed access to the Internet and other online services. This cable modem transmits and receives data much faster than traditional dial-up or ISDN modems. Unlike a dial-up modem, your cable modem is always online. Just open your browser and surf! You can use your high-speed, upgradeable cable modem to connect one or more computers in your home or business to the Internet. You can connect:
Your cable modem is up to 100 times faster than a dial-up modem. It lets you enjoy surfing the Web without the long wait. Because many network and other factors can affect performance, the actual speed will vary.
A single computer equipped with an Ethernet adapter directly to the Ethernet port on the SB5102 cable modem Up to 63 computers to a single SB5102 cable modem using an Ethernet hub as shown in Cabling for Multiple Users on page 29
Your cable modem is made by the company with over 50 years of cable TV expertise.
The model number on your cable modem may be different than in the illustrations and screen images in this guide.
The lights provide information about power, communications, and errors:
3 Power Receive Send Online PC/Activity
Startup diagnostics in progress Scanning for a receive (downstream) channel connection Scanning for a send (upstream) channel connection Scanning for a network connection Transmitting or receiving data
The cable modem is powered on The downstream channel is connected The upstream channel is connected The startup process is complete A device, such as a computer or hub, is connected to the Ethernet connector on the back of the SB5102.
During normal operation, the Power, Receive, Send, and Online lights are on and the PC/Activity light flashes when the cable modem is transferring data.
The rear panel provides cabling connectors and the power receptacle.
1 ETHERNET CABLE POWER
Provides a connection to Ethernet equipped computers using a cable terminated with an RJ-45 connector. Provides a connection to the coaxial cable (coax) outlet. Provides AC power to the cable modem.
Before you begin the installation, check that you received the following items with your SB5102 cable modem:
AC connector 10/100Base-T Ethernet cable
Connects the SB5102 cable modem to the AC electrical outlet Connects to the Ethernet port
You will need 75-ohm coaxial cable with F-type connectors to connect your cable modem to the nearest cable outlet. If a TV is connected to the cable outlet, you may need a 5-900 MHz RF splitter and a total of three coaxial cables to connect both the TV and the cable modem. The coaxial cable and RF splitter are available at consumer electronic stores.
To avoid damaging your cable modem or PC with static electricity: Postpone cable modem installation until there is no risk of thunderstorm or lightning activity in the area. To avoid damaging the cable modem with static electricity:
Always make the wall connection first.
Always first connect the coaxial cable to the grounded cable TV wall outlet. Before you connect or disconnect the Ethernet cable from your cable modem or PC, always touch the coaxial cable connector on the cable modem to release any static charges.
The SB5102 cable modem must be installed in a vertical position. To prevent overheating the cable modem, do not block the ventilation holes on its sides. Do not open the cable modem. Refer all service to your cable service provider. Wipe the cable modem with a clean, dry cloth. Never use cleaning fluid or similar chemicals. Do not spray cleaners directly on the unit or use forced air to remove dust. This product is for indoor use only. Do not route the Ethernet cable outside of the building. Exposure of the cables to lightning could create a safety hazard and damage the product.
Before you connect or disconnect the Ethernet cable, always touch the coaxial cable connector on the cable modem.
Signing Up for Service
You must sign up with a cable service provider to access the Internet and other online services. To activate your service, call your local cable service provider. To receive data service, you need to provide the MAC address printed on the bar code label marked CM HFC MAC ID on the bottom of the cable modem. You can record it here: 00 : ______ : ______ : ______ : ______ : ______ You should ask your cable service provider the following questions:
Do you have any special system requirements? When can I begin to use my cable modem? Are there any files I need to download after I am connected? Do I need a user name or password to access the Internet or use e-mail?
Computer System Requirements
You can use any Web browser such as Microsoft Internet Explorer or Netscape Navigator with your SB5102 cable modem. Your SB5102 cable modem is compatible with Microsoft Windows, Macintosh, and UNIX computers. Windows 95 is not supported by the SB5102. You must have the latest version of your operating system installed with all current patches and revisions.
You can use the Ethernet connection with any Windows, Macintosh, Linux, or UNIX computer equipped with a Ethernet, Fast Ethernet, or Gigabit Ethernet card. Your Ethernet card must be installed in your computer before you install the cable modem. If it is not installed, follow the installation instructions provided with your Ethernet card. A Gigabit Ethernet Network Interface Card (GigE) is needed to achieve the maximum data throughput rates.
To install and configure your cable modem:
Install the cables as described in one of:
Cabling and Startup for a Single User on page 9 Cabling for Multiple Users on page 29
Configure TCP/IP and verify the IP address for your computer following one of:
Configuring TCP/IP on page 11 Your Macintosh or UNIX user manual
Cabling and Startup for a Single User
Allow 5 to 30 minutes to power up the first time because the SB5102 cable modem must find and lock on the appropriate channels for communications.
Be sure your computer is on and the cable modem is unplugged. Connect one end of the coaxial cable to the cable outlet or splitter. Connect the other end of the coaxial cable to the CABLE connector on the cable modem. Hand-tighten the connectors to avoid damaging them. Plug the power cord into the POWER connector on the cable modem and the electrical outlet. This turns the SB5102 cable modem on. You do not need to unplug it when not in use. Check that the lights on the cable modem front cycle through this sequence: Power flashes during the self-test and changes to solid green when the self-test is successfully complete. Receive flashes while scanning for the receive (downstream) channel and changes to solid green when it is connected. Send flashes while scanning for the send (upstream) channel and changes to solid green when it is connected. Online flashes while the cable modem downloads configuration data and changes to solid green when the download is complete.
To cable outlet (step 2) To electrical outlet (step 3)
SB5102 cable modem
Always connect coaxial cable to the wall outlet first.
Cabling and Startup for a Single User, continued
Connect the provided Ethernet cable to the Ethernet connector on the cable modem. Connect the other end to the Ethernet port on your computer. Perform the procedures for Configuring TCP/IP on page 11.
The SB5102 cable modem contains all required software. You do not need to configure the cable modem, but you must be sure that your computer is configured for TCP/IP (a protocol for communication between computers). Perform one of:
Configuring TCP/IP in Windows 98, Windows 98 SE, or Windows Me on page 12 Configuring TCP/IP in Windows 2000 on page 15 Configuring TCP/IP in Windows XP on page 19 Follow the instructions in your Macintosh or UNIX user manual
After configuring TCP/IP, perform one of the following to verify the IP address: Verifying the IP Address in Windows 98, Windows 98 SE, or Windows Me on page 26 Verifying the IP Address in Windows 2000 or Windows XP on page 27 Follow the instructions in your Macintosh or UNIX user manual
Your cable service provider may provide additional instructions to set up your computer.
Configuring TCP/IP in Windows 98, Windows 98 SE, or Windows Me
On the Windows Desktop, click Start. Select Settings and then Control Panel from the pop-up menus. Double-click the Network icon on the Control Panel window. Select the Configuration tab on the Network window. Verify that TCP/IP is installed for the adapter that will be used to connect to the SB5102 cable modem. If TCP/IP is installed, then skip to step 10. If TCP/IP is not installed for the adapter, continue with step 6.
To access an electronic version of this guide please visit: http://broadband.motorola.com/consumers/support
Although your SB5102 cable modem model number may be different than in the images in this guide, the procedure is the same.
Configuring TCP/IP in Windows 98, Windows 98 SE, or Windows Me, continued
Select the adapter to be used for the SB5102 cable modem connection and then click Add. Double-click the Protocol option on Select Network Component Type window. Click Microsoft in the Manufacturers section and click TCP/IP in the Network Protocol section of Select Network Protocol window. Click OK.
10 Click TCP/IP on the Network window. If there is more than one TCP/IP entry, choose
the one for the Ethernet card connected to the cable modem.
11 Click Properties. The TCP/IP window is displayed. 12 Click the IP Address tab. 13 Click Obtain an IP address automatically. 14 Click OK to accept the TCP/IP settings. 15 Click OK to close the Network window. 16 Click OK when prompted to restart your computer and click OK again.
When you complete TCP/IP configuration, go to Verifying the IP Address in Windows 98, Windows 98 SE, or Windows Me on page 26.
Configuring TCP/IP in Windows 2000
On the Windows Desktop, click Start. Select Settings and then Control Panel from the pop-up menus. Double-click the Network and Dial-up Connections icon on the Control Panel window. In the steps that follow, a connection number such as 1, 2, or 3 is a reference displayed on PCs with multiple network interfaces. PCs having only one network interface may display only the label Local Area Connection.
On the Network and Dial-up Connections window, double-click Local Area Connection number. The value of number varies from system to system. The Local Area Connection number Status window is displayed.
Configuring TCP/IP in Windows 2000, continued
Click Properties. Information similar to the lower window is displayed. If Internet Protocol (TCP/IP) is in the list of components, TCP/IP is installed. You can skip to step 10. If Internet Protocol (TCP/IP) is not in the list, click Install. The Select Network Component Type window is displayed. Continue with step 7.
Click Protocol on the Select Network Component Type window and click Add. The Select Network Protocol window is displayed. Click Internet Protocol (TCP/IP) in the Network Protocol section on the Select Network Protocol window. Click OK. The Local Area Connection number Properties window is re-displayed.
10 On the Local Area Connection number Properties window, be sure the box next to
Internet Protocol (TCP/IP) is checked.
11 Click Properties. The Internet Protocol (TCP/IP) Properties window is displayed as
shown at bottom left.
12 Be sure Obtain IP address automatically and Obtain DNS server address
automatically are selected.
13 Click OK to accept the TCP/IP settings. 14 Click OK to close the Local Area Connection number Properties window. 15 Click OK when prompted to restart your computer and click OK again.
When you complete the TCP/IP configuration, go to Verifying the IP Address in Windows 2000 or Windows XP on page 27.
Configuring TCP/IP in Windows XP
On the Windows desktop, click Start to display the Start window shown at left. Click Control Panel to display the Control Panel window. The display varies, depending on your Windows XP view options. If the display is a Category view as shown below, continue with step 3. Otherwise, skip to step 5.
Click Network and Internet Connections to display the Network and Internet Connections window. 19
Configuring TCP/IP in Windows XP, continued
On the Network and Internet Connections Pick a task window, click Network Connections to display the LAN or High-speed Internet connections. Skip to step 6.
If a classic view similar to at left is displayed, click Network Connections to display the LAN or High-speed Internet connections.
Right-click on your network connection. If more than one connection is displayed, be sure to select the one for your network interface. Select Properties from the pop-up menu to display the Local Area Connection Properties window.
On the Local Area Connection Properties window, be sure Internet Protocol (TCP/IP) is checked. If it is not checked, check it. Select Internet Protocol (TCP/IP) and click Properties to display the Internet Protocol (TCP/IP) Properties window.
10 On the Internet Protocol (TCP/IP) Properties window, verify that the settings are
correct, as shown at left.
11 Click OK to close the TCP/IP Properties window. 12 Click OK to close the Local Area Connection Properties window.
Verifying the IP Address
The following subsections describe verifying an IP Address. Perform the appropriate procedure for your Windows version:
Verifying the IP Address in Windows 98, Windows 98 SE, or Windows Me on page 26 Verifying the IP Address in Windows 2000 or Windows XP on page 27
For a Macintosh or UNIX system, refer to your user guide.
Verifying the IP Address in Windows 98, Windows 98 SE, or Windows Me
To check the IP address:
The values for Adapter Address, IP Address, Subnet Mask, and Default Gateway on your PC will be different than in the image above.
On the Windows Desktop, click Start. Select Run. The Run window is displayed. Type winipcfg.exe and click OK. A window similar to the example at top left is displayed. Select your adapter name the Ethernet card. Click Renew. Click OK after the system displays an IP address.
If after performing this procedure your computer cannot access the Internet, call your cable service provider for help.
In Windows 98 Second Edition, if IP Autoconfiguration Address is displayed, call your service provider.
Verifying the IP Address in Windows 2000 or Windows XP
On the Windows Desktop, click Start. Select Run. The Run window is displayed. Type cmd and click OK. A window like the one at upper left is displayed. Type ipconfig and press ENTER to display your IP configuration. A display, like the window at upper left, indicates a normal configuration. If an Autoconfiguration IP Address is displayed as in the window at bottom left, there is an incorrect connection between your PC and the cable modem or there are cable network problems. Check:
Your cable connections Whether you can see cable-TV channels on your television
After verifying your cable connections and proper cable-TV operation, you can renew your IP address.
Renewing Your IP Address
To renew your IP address:
Type ipconfig /renew and press ENTER. If a valid IP address is displayed as shown at left, Internet access should be available. Type exit and press ENTER to return to Windows.
Cabling for Multiple Users
Cable outlet Coaxial cable SB5102 cable modem Ethernet crossover cable Ethernet hub or switch Ethernet cable Along with an optional hub or router, the SB5102 can serve as an Internet gateway for up to 63 computers. Please reference the diagram shown on the left. Not all service providers support multiple user service. For information about multiple user service, contact your cable service provider.
If the solutions listed here do not solve your problem, contact your cable service provider. Before calling your service provider, try one of:
Unplugging and plugging in the cable modem power cord to restart the cable modem Pressing the reset button on the rear panel
Restarting or resetting the cable modem may take 5 to 30 minutes. Your service provider may ask for the status of the front-panel lights as described in Front-Panel Lights and Error Conditions on page 32.
Green POWER light is off
Check that the power cord is properly plugged into the electrical outlet and the cable modem. Check that the electrical outlet is working.
Cannot send or receive data
Check the lights on the front panel. Note the first light from top to bottom that is off. This light indicates where the error occurred as described in Front-Panel Lights and Error Conditions on page 32. If you have cable TV, check that your TV is working and the picture is clear. If you cannot receive your regular TV channels, your data service will not function. Check the coaxial cable at the cable modem and wall outlet. Hand-tighten if necessary. Check the IP address. Follow the steps in Verifying the IP Address in Windows 98, Windows 98 SE, or Windows Me on page 26 or Verifying the IP Address in Windows 2000 or Windows XP on page 27. Call your cable service provider if you need an IP address. Check that the Ethernet cable is properly connected to the cable modem and your computer.
coaxial cable (coax) DOCSIS download downstream Ethernet A type of wire consisting of a center wire surrounded by insulation and a grounded shield of braided wire. The shield minimizes electrical and radio frequency interference. The CableLabs Data-Over-Cable Service Interface Specification defines interface standards for cable modems and supporting equipment. To copy a file from one computer to another. You can use the Internet to download files from a server to your home PC. A DOCSIS cable modem downloads its configuration from a server during start-up. In a cable data network, downstream describes the direction of data received by your computer from the Internet. The most widely used type of local area network (LAN). The most commonly installed Ethernet networks are called 10Base-T. 10Base-T provides transmission speeds up to 10 megabits per second (Mbps), usually over twisted-pair wire. Fast Ethernet (100Base-T) provides transmission speeds up to 100 Mbps. An opening in a computer where a circuit board can be inserted to add new capabilities.
F-type connector A connector used to connect coaxial cable to equipment. IP address An Internet Protocol address is an identifier for a computer or device on a TCP/IP network. Networks using the TCP/IP protocol route messages based on the destination IP address. Your cable service provider assigns your cable modem an IP address to provide a continuous Internet connection.
The Media Access Control Address uniquely identifies each device that can be connected to an Ethernet network. It is permanently written to read-only memory (ROM) at the factory and printed on the rear panel of your SB5102 cable modem. You need to provide the MAC address to your cable service provider. Mega Hertz. A measure of radio frequency - millions of cycles per second. One MHz means one million cycles per second. The most common type of connector for Ethernet networks. A splitter is a device that divides the signal power from an input cable equally between two or more signals, each carrying a selected frequency range. Transmission Control Protocol/Internet Protocol is a set of protocols that provides standards and rules for communication between networks. In a cable data network, upstream describes the direction of data sent from your computer to the Internet.
MHz RJ-45 splitter TCP/IP upstream
SB5102 Cable Modem
Motorola, Inc., Connected Home Solutions (Motorola) 101 Tournament Drive Horsham, PA 19044 IMPORTANT: PLEASE READ THIS SOFTWARE LICENSE (LICENSE) CAREFULLY BEFORE YOU INSTALL, DOWNLOAD OR USE ANY APPLICATION SOFTWARE, USB DRIVER SOFTWARE, FIRMWARE AND RELATED DOCUMENTATION (SOFTWARE) PROVIDED WITH MOTOROLAS CABLE DATA PRODUCT (THE CABLE DATA PRODUCT). BY USING THE CABLE DATA PRODUCT AND/OR INSTALLING, DOWNLOADING OR USING ANY OF THE SOFTWARE, YOU INDICATE YOUR ACCEPTANCE OF EACH OF THE TERMS OF THIS LICENSE. UPON ACCEPTANCE, THIS LICENSE WILL BE A LEGALLY BINDING AGREEMENT BETWEEN YOU AND MOTOROLA. THE TERMS OF THIS LICENSE APPLY TO YOU AND TO ANY SUBSEQUENT USER OF THIS SOFTWARE. IF YOU DO NOT AGREE TO ALL OF THE TERMS OF THIS LICENSE (I) DO NOT INSTALL OR USE THE SOFTWARE AND (II) RETURN THE CABLE DATA PRODUCT AND THE SOFTWARE (COLLECTIVELY, PRODUCT), INCLUDING ALL COMPONENTS, DOCUMENTATION AND ANY OTHER MATERIALS PROVIDED WITH THE PRODUCT, TO YOUR POINT OF PURCHASE OR SERVICE PROVIDER, AS THE CASE MAY BE, FOR A FULL REFUND. BY INSTALLING OR USING THE SOFTWARE, YOU AGREE TO BE BOUND BY THE PROVISIONS OF THIS LICENSE AGREEMENT. The Software includes associated media, any printed materials, and any on-line or electronic documentation. Software provided by third parties may be subject to separate end-user license agreements from the manufacturers of such Software. The Software is never sold. Motorola licenses the Software to the original customer and to any subsequent licensee for personal use only on the terms of this License. Motorola and its 3rd party licensors retain the ownership of the Software. You may: USE the Software only in connection with the operation of the Product. TRANSFER the Software (including all component parts and printed materials) permanently to another person, but only if the person agrees to accept all of the terms of this License. If you transfer the Software, you must at the same time transfer the Product and all copies of the Software (if applicable) to the same person or destroy any copies not transferred. TERMINATE this License by destroying the original and all copies of the Software (if applicable) in whatever form.
You may not: (1) Loan, distribute, rent, lease, give, sublicense or otherwise transfer the Software, in whole or in part, to any other person, except as permitted under the TRANSFER paragraph above. (2) Copy or translate the User Guide included with the Software, other than for personal use. (3) Copy, alter, translate, decompile, disassemble or reverse engineer the Software, including but not limited to, modifying the Software to make it operate on non-compatible hardware. (4) Remove, alter or cause not to be displayed, any copyright notices or startup message contained in the Software programs or documentation. (5) Export the Software or the Product components in violation of any United States export laws. The Product is not designed or intended for use in on-line control of aircraft, air traffic, aircraft navigation or aircraft communications; or in design, construction, operation or maintenance of any nuclear facility. MOTOROLA AND ITS 3RD PARTY LICENSORS DISCLAIM ANY EXPRESS OR IMPLIED WARRANTY OF FITNESS FOR SUCH USES. YOU REPRESENT AND WARRANT THAT YOU SHALL NOT USE THE PRODUCT FOR SUCH PURPOSES. Title to this Software, including the ownership of all copyrights, mask work rights, patents, trademarks and all other intellectual property rights subsisting in the foregoing, and all adaptations to and modifications of the foregoing shall at all times remain with Motorola and its 3rd party licensors. Motorola retains all rights not expressly licensed under this License. The Software, including any images, graphics, photographs, animation, video, audio, music and text incorporated therein is owned by Motorola or its 3rd party licensors and is protected by United States copyright laws and international treaty provisions. Except as otherwise expressly provided in this License, the copying, reproduction, distribution or preparation of derivative works of the Software, any portion of the Product or the documentation is strictly prohibited by such laws and treaty provisions. Nothing in this License constitutes a waiver of Motorolas rights under United States copyright law. This License and your rights regarding any matter it addresses are governed by the laws of the Commonwealth of Pennsylvania, without reference to conflict of laws principles. THIS LICENSE SHALL TERMINATE AUTOMATICALLY if you fail to comply with the terms of this License. Motorola is not responsible for any third party software provided as a bundled application, or otherwise, with the Software. U.S. GOVERNMENT RESTRICTED RIGHTS The Product and documentation is provided with RESTRICTED RIGHTS. The use, duplication or disclosure by the Government is subject to restrictions as set forth in subdivision (c)(1)(ii) of The Rights in Technical Data and Computer Software clause at 52.227-7013. The contractor/manufacturer is Motorola, Inc., Connected Home Solutions, 101 Tournament Drive, Horsham, PA 19044.
100 AVD CUV4xdls System Motorola V361 CDM-9803RR Review 170S6FB TC-WE805S Fostex X-77 Siemens ME75 Pctablet Pslx520 IZ12W Samsung PL51 Finepix A303 I865 CS Klimageraet Niva 1600 X-plus Plantronics CT12 FM-2030 IC-4088E Daikin ARK TX-29PM1P CD2453S-24 U7-137 R-963 371EL XVM-F65WL SG3000 WM-EX9 DVD6053 V-WA266ND Flexx 4000N X342N Trade Singapore Software Casio 1602 25PT4501 SH12ZA9 STI 764 SP230B Of Life Asus M6 CSS-HD2 Printer Phaser 3117 X364DW LM-230A SR1000 DHP-W306AV HQ7180 Slide DI3510 N4004S KX-TG1311SP RC177 TXL32C20EA Photosmart 145 AJ3475 Fishfinder RQ-L11 32PFL9705H GSA-4163B PSR-420-PSR-320 PRO P300 DTH252E HD300LD-KIT Navigator 4000 DSR-PD175P Traffic EP-3VCA Polaroid A930 CLP-650 RT-650 Digiwalker C510 SGH-E830 Motopure H15 BT-LH1700W Thinkpad 600E Pantech C300 HBH-660 SL-PG390 ZWD12270W1 DZ-HV564E Remote 880 Dista F700 HE-615 PS42C450b1wxxc CT-W404R Deskjet 9600 TH-42PX70BA SK-5204 DMP-BD80eg-K Titanium Battlefront II CQ-C1300AN KDL-70X4500 DCP-7020
manuel d'instructions, Guide de l'utilisateur | Manual de instrucciones, Instrucciones de uso | Bedienungsanleitung, Bedienungsanleitung | Manual de Instruções, guia do usuário | инструкция | návod na použitie, Užívateľská príručka, návod k použití | bruksanvisningen | instrukcja, podręcznik użytkownika | kullanım kılavuzu, Kullanım | kézikönyv, használati útmutató | manuale di istruzioni, istruzioni d'uso | handleiding, gebruikershandleiding
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101