Using Voicemail. 77 Listening to a Voicemail Message. 77 Receiving a Voicemail Message. 78 Storing Your Voicemail Phone Number. 78 Turning Off the Voice Message Waiting Indicator. 79 Muting the Phone. 79 Using Call Waiting. 79 Calling a Number In a Text Message. 80 Phone Features. 81 Settings Menu. 82 Feature Quick Reference. 83 Calling Features. 83 Messaging Features. 84 Phonebook Features. 84 Personalizing Features. 85 Menu Features. 86 Dialing Features. 87 Call Monitoring Features. 88 Handsfree Features. 89 Data and Fax Call Features. 90 Network Features. 91 Personal Organizer Features. 91 Security Features. 92 News and Entertainment Features. 92 Specific Absorption Rate Data. 93 Consumer Information on Wireless Phones from the FDA. 95 Motorola Limited Warranty for the United States and Canada. 100 Index. 107 Wireless Phone Safety Tips. 117 6
Safety and General Information
IMPORTANT INFORMATION ON SAFE AND EFFICIENT OPERATION. READ THIS INFORMATION BEFORE USING YOUR PHONE. The information provided in this document supersedes the general safety information in users guides published prior to December 1, 2002.
Exposure To Radio Frequency (RF) Energy
Your phone contains a transmitter and a receiver. When it is ON, it receives and transmits RF energy. When you communicate with your phone, the system handling your call controls the power level at which your phone transmits. Your Motorola phone is designed to comply with local regulatory requirements in your country concerning exposure of human beings to RF energy.

Operational Precautions

To assure optimal phone performance and make sure human exposure to RF energy is within the guidelines set forth in the relevant standards, always adhere to the following procedures.

External Antenna Care

Use only the supplied or Motorola-approved replacement antenna. Unauthorized antennas, modifications, or attachments could damage the phone. Do NOT hold the external antenna when the phone is IN USE. Holding the external antenna affects call quality and may cause the phone to operate at a higher power level than needed. In addition, use of unauthorized antennas may result in non-compliance with the local regulatory requirements in your country. 7

Phone Operation

When placing or receiving a phone call, hold your phone as you would a wireline telephone.

Body-Worn Operation

To maintain compliance with RF energy exposure guidelines, if you wear a phone on your body when transmitting, always place the phone in a Motorola-supplied or approved clip, holder, holster, case, or body harness for this phone, if available. Use of accessories not approved by Motorola may exceed RF energy exposure guidelines. If you do not use one of the body-worn accessories approved or supplied by Motorola, and are not using the phone held in the normal use position, ensure the phone and its antenna are at least 1 inch (2.5 centimeters) from your body when transmitting.

2 M SELECT (+) 5

6 SELECT (+) 7 STORE (+) 8

9 SELECT (+)

Storing a Sound File
You can store a sound file, and set it as a ring tone and/or event alert. Press To highlight the p (sound file) indicator in the message

Press 2 M 3

To open the Inbox Menu scroll to Store display a list of items you can store scroll to File Attachment Highlight Features display the file name view storage options scroll to Store Only or Set As Ring Tone select the option If you select Store Only, the procedure is complete. If you select Set As Ring Tone, your phone displays Set As Which?, and lists the events for which you can set an alert.

4 SELECT (+) 5

scroll to the event store the sound and set it as the event alert

11 SELECT (+)

Using the Micro-Browser
The micro-browser lets you access Web pages and Web-based applications on your phone. Contact your service provider to set up access, if necessary.
Starting a Micro-Browser Session
Highlight Features Find the Feature Press 1

M > Browser

2 SELECT (+) 3
To scroll to a bookmark, service, or application select the item exit the browser
Shortcut: If you open a text message with a Web address (URL) in it, you can press M > Go To to launch the micro-browser and go to the URL. If you cannot establish a network connection with the micro-browser, contact your service provider.
Interacting With Web Pages

SELECT (+)

keypad keys, followed by OK (+)

BACK (-) or *

To scroll through text, or highlight a selectable item select the highlighted item call the highlighted phone number from the micro-browser enter information Tip: Press DELETE (*) to delete 1 letter at a time if you make a mistake. go back to the previous page open the Browser Menu
Downloading Objects from a Web Page
You can download a photo, picture, animation, or sounds (such as a ring tone) from a Web page. You can store these media objects on your phone and use them as wallpaper images, screen saver images, and event alerts.
Press 1 S 2 SELECT (+) 3 S 4 SELECT (+) S SELECT (+) STORE (+) S To highlight the picture or animation open the Inbox Menu scroll to Store display a list of items you can store scroll to File Attachment display the file name view storage options scroll to Store Only, or Set as Screen Saver store the file and, optionally, set it as your screen saver image
You can store a sound file (such as a ring tone) and set it as an event alert. Press 1 S To highlight the sound file indicator (p) indicator in the message open the Inbox Menu scroll to Store display a list of items you can store scroll to File Attachment display the file name view storage options scroll to Store Only or Set As Ring Tone select the option If you select Store Only, the procedure is complete. If you select Set As Ring Tone, your phone displays Set As Which?, and lists the events for which you can set an alert. scroll to the event store the sound and set it as the event alert

You can lock your phone manually or set the phone to lock automatically whenever you turn it off. To use a locked phone, you must enter the unlock code. A locked phone still rings or vibrates for incoming calls or messages, but you must unlock it to answer. You can make emergency calls on your phone even when it is locked. For more information, see page 71.
Locking Your Phone Manually

Find the Feature

M > Settings > Security
> Phone Lock > Lock Now
Press 1 keypad keys 2 OK (+)
To enter your unlock code lock the phone
Setting Your Phone to Lock Automatically
You can set your phone to lock every time you turn it off. Find the Feature
> Phone Lock > Automatic Lock > On
To enter your unlock code activate automatic lock 59

Unlocking Your Phone

At the Enter Unlock Code prompt: Press 1 keypad keys 2 OK (+) To enter your unlock code unlock your phone
Changing a Code or Password
Your phones unlock code is originally set to 1234, and the security code is originally set to 000000. Your service provider may reset these before you receive your phone. Learning to Use Your Phone 60 If your service provider has not reset the unlock code or security code, we recommend that you change them to prevent others from accessing your personal information. The unlock code must contain 4 digits, and the security code must contain 6 digits. Notes: If the unlock code is the only code you can change, the New Passwords menu is not available. In this case, change the unlock code by selecting: M > Settings > Security > Phone Lock > Unlock Code. If the unlock code is the only code you can change, the New Passwords menu is not available. In this case, change the unlock code by selecting: M > Settings > Security > Phone Lock > Unlock Code.
To change a code or password: Find the Feature Press 1 S 2 CHANGE (+) 3 keypad keys 4 OK (+) 5 keypad keys 6 OK (+) 7 keypad keys 8 OK (+)

> New Passwords

To scroll to the code or password select the code or password enter your old code or password submit your old code or password enter the new code or password assign the new code or password re-enter the new code or password confirm the new code or password
If You Forget a Code or Password
If you forget your security code, contact your service provider. If you forget your unlock code, try entering 1234 or the last 4 digits of your phone number. If that does not work, do the following at the Enter Unlock Code prompt: Press 1 M 2 keypad keys 3 OK (+) To go to the unlock code bypass screen enter your security code submit your security code

You can also zoom in and out from the menu. Find the Feature
> Other Settings > Initial Setup > Zoom

Setting Display Contrast

> Other Settings > Initial Setup > Contrast

Adjusting the Backlight

You can set the amount of time that the display backlight remains on, or turn off the backlight to conserve battery power. Find the Feature
> Other Settings > Initial Setup > Backlight
Hiding or Showing Location Information
You can activate the Automatic Location Information (ALI) feature to let the network know your location. When ALI is set to Location On, your phone displays the (ALI on) indicator. Services may use your known location to provide useful information (for example, driving directions, or the location of the nearest bank).
Your phone prompts you when the network or a service asks for your location. You can refuse to allow access to this information. When ALI is set to 911 Only, your phone displays the (ALI off) indicator, and the phone does not send location information unless you call the emergency phone number (such as 911). Find the Feature Press 1 S 2 SELECT (+)
M > Settings > Location
To scroll to Location On or 911 Only select the setting
To view or change the location transmission status of your phone during a call, press M> Location.

Limitations of AGPS

Sometimes adequate signals from multiple satellites are unavailable, usually because your AGPS phones antenna cannot establish a view of a wide area of open sky. In these cases, the AGPS feature will not work. Such situations include, but are not limited to, the following: in underground locations inside of buildings, trains, or other covered vehicles under any other metal or concrete roof or structure between tall buildings or under dense tree cover near a powerful radio or television tower 67 Setting Up Your Phone
when your AGPS antenna is covered (for example, by your hand or other object) or facing the ground when there are temperature extremes outside the operating limits of the phone Even where location information can be calculated in such situations, it may take more time than usual, and your location estimate may not be as accurate. Walking or driving very slowly may also substantially reduce AGPS performance. Even where adequate signals from multiple satellites are available, your AGPS feature will provide only an approximate location, often within 150 feet (45 meters) but sometimes much farther from your actual location. The satellites used by your phone's AGPS feature are controlled by the U.S. government and are subject to changes implemented in accordance with the Department of Defense AGPS user policy and the Federal Radio Navigation Plan. These changes may affect the performance of your phone's AGPS feature.

Personalizing Display Text
To change the greeting that displays when you turn on your phone: Find the Feature
> Other Settings > Personalize > Greeting

Calling Features

For basic instructions on how to make and answer calls, see page 19.

Changing the Active Line

Change the active phone line to make and receive calls from your other phone number.
> Phone Status > Active Line
The active line indicator in the display shows the current active phone line (see page 43).

Redialing a Number

If you hear an ordinary busy signal: Press To hang up redial the busy number

Using Automatic Redial

If the network is busy, you hear a fast busy signal, and your phone displays Call Failed. With automatic redial, your phone automatically redials the number for 4 minutes. When the call goes through, your phone rings or vibrates 1 time, displays Redial Successful, and then connects the call. You must turn on automatic redial to use the feature (see page 87). When automatic redial is turned off, you can manually activate the feature to redial a phone number. When you hear a fast busy signal and see Call Failed: Press

N or RETRY (+)

To activate automatic redial

Using Caller ID

Calling line identification (caller ID) displays the phone number for incoming calls. The phone displays the callers name when the name is stored in your phonebook, or Incoming Call when caller ID information is not available.
Canceling an Incoming Call
While the phone is ringing or vibrating: Press To cancel the incoming call

O or IGNORE (-)

Depending on your phone settings and/or service subscription, the call may be forwarded to voice mail, another number, or the caller may hear a busy signal.

Turning Off a Call Alert

You can turn off your phones incoming call alert before answering the call. Press To either volume button turn off the alert Calling Features 71
Calling an Emergency Number
Your service provider programs 1 or more emergency phone numbers, such as 911, that you can call under any circumstances, even when your phone is locked. Note: Emergency numbers vary by country. Your phones preprogrammed emergency number(s) may not work in all locations, and sometimes an emergency call cannot

Delete Delete All Send Message Add Digits Attach Number

Send Tones

Description Create a phonebook entry with the number in the No. field. Delete the entry. Delete all entries in the list. Open a new text message with the number in the To field. Add digits after the number. Attach a number from the phonebook or recent calls lists, after the highlighted number. Send the number to the network as DTMF tones. Note: This option displays only during a call.
Your phone keeps a record of your unanswered calls, and displays: the N (missed call) indicator X Missed Calls Y Unknown, where X is the total number of missed calls and Y is the number of missed calls with no caller ID information Press 1 VIEW (+) To display the received calls list select a call to return make the call

Using the Notepad

The most recent set of digits entered on the keypad are stored in your phones memory. This can be a phone number that you called, or a number that you entered but did not call. To retrieve the number stored in the notepad: Find the Feature

> Notepad

Attaching a Number
While dialing (with digits visible in the display): Press

> Attach Number

To attach a number from the phonebook or recent calls lists 75

Calling With Speed Dial

Each entry you store in your phonebook is assigned a unique speed dial number. Tip: To see an entrys speed dial number, press M > Phonebook, scroll to the entry, press VIEW (+). To speed dial a phonebook entry: Press 1 keypad keys 2 # To enter the speed dial number for the entry you want to call submit the number Note: Some networks let you skip this step for speed dial numbers 1 through 99. call the entry
Calling With 1-Touch Dial
To call phonebook entries 1 through 9, just press and hold the 1-digit speed dial number for 1 second. We recommend that you reserve phonebook entry 1 (speed dial number 1) for storing and dialing your voicemail number. Usually, your service provider has already done this for you. For more information about storing speed dial numbers, see the More Here reference guide.

Using Voicemail

Voicemail messages that you receive are stored on the network. To listen to your messages, you must call your voicemail phone number. Note: Your service provider may include additional information about using this feature.

Listening to a Voicemail Message
M > Messages > VoiceMail
Shortcut: If your voicemail number is stored as phonebook entry number 1, press and hold 1 to listen to your voicemail message(s). Press
To call your voicemail number and listen to the message Note: If no voicemail number is stored, your phone prompts you to store one. Calling Features 77
Receiving a Voicemail Message
When you receive a voicemail message, your phone displays the f (voice message waiting) indicator and a New VoiceMail notification. Press CALL (+) To listen to the message
The phone calls your voicemail phone number. If no voicemail phone number is stored, your phone prompts you to store one.
Storing Your Voicemail Phone Number
If necessary, use the following procedure to store your voicemail phone number. Usually, your service provider has already done this for you. Find the Feature Calling Features Press 1 keypad keys 2 OK (+)
M > Messages M > VoiceMail Setup
To enter your voicemail number store the number
Note: You cannot store Pause, Wait, or n characters in this number. If you want to store your voicemail phone number with these characters, create a phonebook entry for it. Then, you can use the entry to call your voicemail. Additionally, your service provider may store your voicemail number as phonebook entry number 1, so you can use 1-touch dial to listen to your voicemail messages. 78
Turning Off the Voice Message Waiting Indicator
To clear the f (voice message waiting) indicator: Find the Feature
M > Messages M > Clear Count

Muting the Phone

To mute your phone during a call, press MUTE (+).

Using Call Waiting

When you are on a call, an alert tone sounds to indicate that you have received another call.

Press 1 ANSWER (+) or

IGNORE (-)
To answer the new call Calling Features cancel the incoming call to switch between calls to end the active call Note: When the active call ends, the call on hold rings back within a few seconds.
Note: Depending on your phone settings and/or service subscription, the second call may be forwarded to voice mail, another number, or the caller may hear a busy signal. 79
Calling a Number In a Text Message
To call a phone number in a text message that you receive, highlight the message and then:

Press 1 M

To open the Inbox Menu Note: Skip this step if the message is already opened. scroll to Call Back select the message containing the embedded number call the number
4 CALL (+) Calling Features 80

Phone Features

Main Menu

Industry Canada. The highest SAR value for this model phone when tested for use at the ear is 1.45 W/kg, and when worn on the body, as described in this user guide, is 0.66 W/kg. (Body-worn measurements differ among phone models, depending upon available accessories and regulatory requirements).2 While there may be differences between the SAR levels of various phones and at various positions, they all meet the governmental requirements for safe exposure. Please note that improvements to this product model could cause differences in the SAR value for later products; in all cases, products are designed to be within the guidelines. Additional information on Specific Absorption Rates (SAR) can be found on the Cellular Telecommunications & Internet Association (CTIA) Web site: http://phonefacts.net or the Canadian Wireless Telecommunications Association (CWTA) Web site: http://www.cwta.ca
1. In the United States and Canada, the SAR limit for mobile phones used by the public is 1.6 watts/kg (W/kg) averaged over one gram of tissue. The standard incorporates a substantial margin of safety to give additional protection for the public and to account for any variations in measurements. 2. The SAR information includes the Motorola testing protocol, assessment procedure, and measurement uncertainty range for this product.
Consumer Information on Wireless Phones from the FDA
The U.S. Food and Drug Administration (FDA) provides consumer information on wireless phones at: http://www.fda.gov/cellphones/qa.html Following are safety-related questions and answers discussed at this web site.
Do wireless phones pose a health hazard?
The available scientific evidence does not show that any health problems are associated with using wireless phones. There is no proof, however, that wireless phones are absolutely safe. Wireless phones emit low levels of radio frequency energy (RF) in the microwave range while being used. They also emit very low levels of RF when in the stand-by mode. Whereas high levels of RF can produce health effects (by heating tissue), exposure to low level RF that does not produce heating effects causes no known adverse health effects. Many studies of low level RF exposures have not found any biological effects. Some studies have suggested that some biological effects may occur, but such findings have not been confirmed by additional research. In some cases, other researchers have had difficulty in reproducing those studies, or in determining the reasons for inconsistent results.

What is FDA doing to find out more about the possible health effects of wireless phone RF?
FDA is working with the U.S. National Toxicology Program and with groups of investigators around the world to ensure that high priority animal studies are conducted to address important questions about the effects of exposure to radio frequency energy (RF). FDA has been a leading participant in the World Health Organization International Electromagnetic Fields (EMF) Project since its inception in 1996. An influential result of this work has been the development of a detailed agenda of research needs that has driven the establishment of new research programs around the world. The Project has also helped develop a series of public information documents on EMF issues. FDA and the Cellular Telecommunications & Internet Association (CTIA) have a formal Cooperative Research and Development Agreement (CRADA) to do research on wireless phone safety. FDA provides the scientific oversight, obtaining input from experts in government, industry, and academic organizations. CTIA-funded research is conducted through contracts to independent investigators. The initial research will include both laboratory studies and studies of wireless phone users. The CRADA will also include a broad assessment of additional research needs in the context of the latest research developments around the world.
What steps can I take to reduce my exposure to radio frequency energy from my wireless phone?
If there is a risk from these products--and at this point we do not know that there is--it is probably very small. But if you are concerned about avoiding even potential risks, you can take a few simple steps to minimize your exposure to radio frequency energy (RF). Since time is a key factor in how much exposure a person receives, reducing the amount of time spent using a wireless phone will reduce RF exposure. If you must conduct extended conversations by wireless phone every day, you could place more distance between your body and the source of the RF, since the exposure level drops off dramatically with distance. For example, you could use a headset and carry the wireless phone away from your body or use a wireless phone connected to a remote antenna Again, the scientific data do not demonstrate that wireless phones are harmful. But if you are concerned about the RF exposure from these products, you can use measures like those described above to reduce your RF exposure from wireless phone use.

How to Obtain Warranty Service or Other Information?
Phones 1-800-331-6456 Two-Way Radios 1-800-353-2729 Pagers 1-800-548-9954 Canada All Products 1-800-461-4575 TTY 1-888-390-6456 For Accessories and Software, please call the telephone number designated above for the product with which they are used. You will receive instructions on how to ship the Products, Accessories or Software, at your expense, to a Motorola Authorized Repair Center. To obtain service, you must include: (a) a copy of your receipt, bill of sale or other comparable proof of purchase; (b) a written description of the problem; (c) the name of your service provider, if applicable; (d) the name and location of the installation facility (if applicable) and, most importantly; (e) your address and telephone number. USA
What Other Limitations Are There?
ANY IMPLIED WARRANTIES, INCLUDING WITHOUT LIMITATION THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, SHALL BE LIMITED TO THE DURATION OF THIS LIMITED WARRANTY, OTHERWISE THE REPAIR, REPLACEMENT, OR REFUND AS PROVIDED UNDER THIS EXPRESS LIMITED WARRANTY IS THE EXCLUSIVE REMEDY OF THE CONSUMER, AND IS PROVIDED IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR IMPLIED. IN NO EVENT SHALL MOTOROLA BE LIABLE, WHETHER IN CONTRACT OR TORT 103
(INCLUDING NEGLIGENCE) FOR DAMAGES IN EXCESS OF THE PURCHASE PRICE OF THE PRODUCT, ACCESSORY OR SOFTWARE, OR FOR ANY INDIRECT, INCIDENTAL, SPECIAL OR CONSEQUENTIAL DAMAGES OF ANY KIND, OR LOSS OF REVENUE OR PROFITS, LOSS OF BUSINESS, LOSS OF INFORMATION OR DATA, SOFTWARE OR APPLICATIONS OR OTHER FINANCIAL LOSS ARISING OUT OF OR IN CONNECTION WITH THE ABILITY OR INABILITY TO USE THE PRODUCTS, ACCESSORIES OR SOFTWARE TO THE FULL EXTENT THESE DAMAGES MAY BE DISCLAIMED BY LAW. Some states and jurisdictions do not allow the limitation or exclusion of incidental or consequential damages, or limitation on the length of an implied warranty, so the above limitations or exclusions may not apply to you. This warranty gives you specific legal rights, and you may also have other rights that vary from state to state or from one jurisdiction to another. Laws in the United States and other countries preserve for Motorola certain exclusive rights for copyrighted Motorola software such as the exclusive rights to reproduce and distribute copies of the Motorola software. Motorola software may only be copied into, used in, and redistributed with, the Products associated with such Motorola software. No other use, including without limitation disassembly of such Motorola software or exercise of the exclusive rights reserved for Motorola, is permitted.

Product Registration

Online Product Registration: http://www.motorola.com/warranty Product registration is an important step toward enjoying your new Motorola product. Registering helps us facilitate warranty service, and permits us to contact you should your product require an update or other service. Registration is for U.S. residents only and is not required for warranty coverage. Please retain your original dated sales receipt for your records. For warranty service of your Motorola Personal Communications Product you will need to provide a copy of your dated sales receipt to confirm warranty status. Thank you for choosing a Motorola product.

Export Law Assurances

This product is controlled under the export regulations of the United States of America and Canada. The Governments of the United States of America and Canada may restrict the exportation or re-exportation of this product to certain destinations. For further information contact the U.S. Department of Commerce or the Canadian Department of Foreign Affairs and International Trade.
Wireless: The New Recyclable
Your wireless phone can be recycled. Recycling your wireless phone reduces the amount of waste disposed in landfills and allows recycled materials to be incorporated into new products. CTIA and its members encourage consumers to recycle their phones and have taken steps to promote the collection and environmentally sound recycling of end-of-life wireless devices. As a wireless phone user, you have an important role in ensuring that this phone is recycled properly. When it comes time to give this phone up or trade it in for a new one, please remember that the phone, the charger, and many of its accessories can be recycled. It's easy. To learn more about CTIA's Recycling Program for Used Wireless Devices, including information on where to recycle wireless devices near you, please visit www.recyclewirelessphones.com.

RF Energy Interference

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Numerics

1-touch dial defined 76 using 76 voicemail number 76 3-way call 83 animation screen saver 22, 64, 65 storing 21 viewing 92 answering a phone call 20 application, locking and unlocking 92 appointments. See datebook auto PIN dial 87 automatic answer 89 automatic location information (ALI) indicator defined 42 automatic redial using 70
accessories optional 83 accessory connector port 1 active line indicator defined 43 illustration 41 AGPS during an emergency call 72 alarm 28, 30 alert creating 85 defined 63 setting 22, 27 turning off 71 analog signal indicator defined 42 illustration 41

battery car kit charger time 90 charging 1516 extending battery life 16, 56 installing 1415 level indicator 16, 41, 42 block cursor, defined 46 browse text mode 47 107
browser. See micro-browser button smart 57 speakerphone 1 volume control 1, 18
calculator 92 calendar. See datebook call 3-way call 83 adding digits after phone number 74 alert, turning off 71 answer options 64 answering 20 call waiting 79 canceling 71 deleting 73 dialed calls list 73 emergency number 71, 72 ending 19 muting 79 received calls list 73 receiving 20 recent calls 73 restricting 83 speakerphone 89 storing 73 timers 88 unanswered call 58 108
unanswered phone call 75 Call Failed message 70 call waiting 79 caller ID 70, 75 calling line identification. See caller ID car kit automatic handsfree 89 charger time 90 power-off delay 90 codes changing 60 default 18, 60 forgotten code/password 62 contrast, display 66 convertible covers 3940 cursor 46
data call receive 90 send 90 date, setting 63 datebook add event 91 adding an event 30, 35 alarm 30, 34, 35 calendar 28 changing event information 35
copying an event 36 day view 29 deleting an event 37 event reminders 37 event view 29 reminders 30 repeat interval 33 start time 38 storage duration 38 using 28 view event 91 week view 28 defined 57 deleting a call 73 dialed calls list 73 digital signal indicator defined 42 illustration 41 display contrast 66 described 41 idle display 41 language 86 zooming in/out 65 downloading from a Web Page 25 ring tones 25 DTMF tones activating 87 sending 74, 87
earpiece illustration 1 volume, adjusting 18 emergency call using AGPS 72 emergency number 71, 72 end key 1, 19 ending a call 19 Enter Unlock Code message 60, 62 external display 58
flashing cursor, defined 46 flip external display 58 open to answer 64 turning the phone on 18
handsfree mode external display and 58 handsfree use 89 automatic answer 89 automatic call routing 89 charger time 90 power-off delay 90 speakerphone, activating 89
headset use with external display 58 headset jack 1 hide location 91 hiding location AGPS 67 showing location 66, 67
idle display, defined 41 in use indicator defined 42 illustration 41 Incoming Call message 70 incoming phone call, canceling 71 indicators active line 41, 43 automatic location information (ALI) 42 battery level 16, 41, 42 digital/analog signal 41, 42 in use 41, 42 location privacy 41 loud ring style 42, 63 menu 41, 43 message waiting 21, 41, 42 missed call 75 110
ring style 41, 42, 64 roam 41, 42 signal strength 41, 42 silent alert 42, 63 silent ring style 42, 63 soft ring style 42, 63 vibrate and ring style 42, 63 vibrate style 42, 63 voice message waiting 78, 79 iTAP software 51

8 Use your wireless phone to call for help. Dial 9-1-1 or other local emergency number in the case of fire, traffic accident or medical emergencies.* 9 Use your wireless phone to help others in emergencies. If you see an auto accident, crime in progress or other serious emergency where lives are in danger, call 9-1-1 or other local emergency number, as you would want others to do for you.* 10 Call roadside assistance or a special non-emergency wireless assistance number when necessary. If you see a broken-down vehicle posing no serious hazard, a broken traffic signal, a minor traffic accident where no one appears injured, or a vehicle you know to be stolen, call roadside assistance or other special non-emergency wireless number.*
* Wherever wireless phone service is available. 119
Check the laws and regulations on the use of wireless telephones and their accessories in the areas where you drive. Always obey them. The use of these devices may be prohibited or restricted in certain areas.
For more information, please call 1-888-901-SAFE or visit the CTIA Web site at www.wow-com.com

Installing Motorola V60 Speakers

Tools used in this guide

Spudger (1) T6 Torx Screwdriver (1)
This is a guide showing how to replace the Motorola V60 speakers.

2011 iFixit CC BY-NC-SA

www.iFixit.com

Page 1 of 4

Step 1 - Battery
Remove battery cover by pushing down release lever at top of phone while prying off cover. Set cover aside.

Step 2

Remove battery by grabbing it near the bottom and lifting out.

Page 2 of 4

Step 3 - Speakers
Unscrew four corner screws with T6 screwdriver. Note: Top screws are silver and short while bottom screws are black and longer.

Step 4

Pry off back chassis by wedging spudger in crevice between back panel and phone and lifting.

Page 3 of 4

Step 5
Insert spudger between speaker and back chassis and lifting. Note: This may take some effort.
To reassemble your device, follow these instructions in reverse order.
This document was last generated on Feb 12, 2011.

Page 4 of 4