La tapa del vaso de la licuadora debe perma
necer trabada en la parte superior del vaso durante el funcionamiento del producto. Nunca conecte el producto con el vaso vaco y no retire la tapa del vaso antes de la parada total de la cuchilla. Las cuchillas son afilladas y deben ser manipuladas con cuidado, evitndose accidentes. No mantenga ningn contacto con la cuchilla, ni introduzca utensilios (filtro, cuchillos, cucharas, tenedores, etc.) en el vaso, mientras el producto est en funcionamiento, para evitar accidentes personales, con terceros, o causar daos al producto. Una esptula podr ser utilizada solamente cuando el producto no est en funcionamiento, evitndose as, en caso contrario, la posibilidad de graves accidentes. No trate de retirar el filtro con el aparato en funcionamiento. Verifique que el selctor est en la posicion 0 (desconectado) antes de enchufar el artifacto. A los efectos de no danr el artefacto o provocar defectos nunca lave las piezas de este producto en el lavavajilas. CONSERVACIN Y LIMPIEZA
ENGLISH BLENDER OPTIMIX 2 speeds
IMPORTANT RECOMMENDATIONS MOULINEX takes pride in the quality of its products and concerns itself about the personal safety of its consumers. That is why, before using the product for the first time, please read the recommendations carefully and follow the instructions about using the product. The perfect functioning of your product, your safety and the safety of others depend on them. a. Before plugging this product into the wall socket outlet check that the voltage is the same as that indicated on the product (120V, 127V, 220V, or other). If the voltage is not the same, it may cause damage to the product and put you in danger. b. This product was designed and manufactured only for domestic use. Its continual use for com-mercial and professional purposes may cause overload and damage to the product or personal accidents. Its use under these conditions will render the product warranty null and void. c. To avoid electrical shocks, never operate the product with hands or on humid or wet surfaces. Do not allow the electrical parts of the product to get wet and never submerge it in water. d. To avoid accidents, this product should not be operated by children or people who are not familiar with these instructions. e. Unplug the product from the wall outlet socket when not in use or when cleaning it. Slight carelessness may involuntarily switch the product on and cause accidents. f. Do not use the product after it has been dropped or if there is any type of malfunctioning. Take it to an Authorised Service Centre Moulinex. g. Never use this product if the power supply cord or plug is damaged, so as to avoid accidents, like electric shocks, short-circuits, burns or even fire. The purchase and replacement of the power supply cord must be carried out at an Authorised Service Centre Moulinex. h. Never attempt to dismount or repair the product yourself or let unskilled persons attempt to do so, in order maintain the product warranty and to avoid technical problems. Take it to an Autorised Service Centre Moulinex. i. Do not allow the power supply cord to hang over the edge of the table or counter, or touch hot surfaces, so as not to damage its insulation and cause technical problems and accidents. j. Never move the product or unplug it by pulling on the power supply cable, so as not to affect the good operation of the product and to aavoid possible accidents. k. The use of parts and accessories that are not factory originals may cause personal accidents, damage the product and cause it to malfunction, as well as invalidate the product warranty.

l. When plugging in or unplugging the product, make sure that your fingers are not in contact with the plug pins to avoid electric shock. m. Do not leave the product working or connected to the wall outlet socket whiler you are away from it, even for a few moments, especially when there are children around. n. Do not connect other equipment to the same wall outlet socket by using adaptors or extensions, to avoid electrical overloads which lead do damage the product components and to possible accidents. DESCRIPTION OF THE PRODUCT 1. Lid 2. Transparent plastic jar 3. Motor base 4. Jar handle 5. Integrated blade 6. Speed selector with Pulse function CARACTERISTICS Speeds 2 Jar capacity: 2 litres (total)1,5 litre (useful) GETTING STARTED Before plugging the blender, verify that the jar is correctly set onto the motor base. For this, put the jar on top of the motor base and turn it clockwise until it is locked (fig. 1). The lid also has locking system: put it on top of the jar and turn it clockwise until it is locked (fig. 1) The speed selector positions are (fig. 2): 0 - off low speed - 1 high spped - 2 Pulse - function for intermittent processing - to obtain an optimized blending for all - your recipes, always start to blend with - Pulse.
The blender jar lid should remain on top of the jar
while the appliance is working.
Never switch the product on when the jar is
empty, and do not remove the lid from the jar until the blade has completely stopped turning. The blade is sharp and should be handled with care to avoid serious accidents. Do not come into contact with the blades or place any utensils (knives, spoons, forks, etc.) in the jar while the appliance is working, to avoid accidents to yourself ou third parties, or cause damage to the product. A spatula may be used only when the product has been switched off at the power outlet and the blades are no longer turning. Check that the speed selector is in position 0 (switched off) before plugging the appliance in. In order not to damage the appliance or cause defects, never wash the parts of this appliance in the dishwasher. CONSERVATION AND CLEANING
Limpieza antes del primer uso Se recomienda lavar el vaso, la tapa y las cuchillas antes de utilizar el producto por primera vez. Limpieza del cuerpo del producto Utilice apenas un pao humedecido con agua, o agua y jabn neutro. No utilice productos abrasivos para no perjudicar su aparencia. EN CASO DE DIFICULTADES Antes de llevar el producto a un Servicio Autorizado, cercirise si el problema puede ser solucionado con las siguientes orientaciones: PROBLEMA

El producto no funciona

Cleaning before the first use The jar, lid, and blade should be washed before using the product for the first time. Cleaning The motor base can be washed only with a humid tissue. Do not use abrasive products to avoid damages. TROUBLESHOOTING Before taking your product to an Authorised Service Centre Moulinex, check if the problem can be solved following the indicated solution. PROBLEMS Products does not operate CAUSES Plug is not connected SOLUTIONS Connect the appliance to a socket with the same voltage. Check for correct positioning of the jar.

CAUSAS

No hay energia elctrica en el tomacorriente. El vaso processador no est correctamente trabado en la base motora.

QUE HACER

Enchufe el producto en otro tomacorriente del mismo voltaje. Reoita la operacin de montar el vaso. Corregir el posicionamiento del vaso. Apoye el producto en una superficie plana. No llene el vaso superando la capacidad (1,5 L). Reducir el tamao de los trozos.
The jar is not corretctly positioned on the body of the appliance. Escessive vibration. Leaks from the lid. The product is not set on a level surface. Too great a volume of ingredients. The lid is not correctly positioned. Pieces of food too big or too hard.
No llene el vaso de la licuadora o no lice

ATTENTION

process hot liquids or food at a temperature higher than 80C. At this temperature the liquid is not voiling but it produces a considerable amount of steam. When blending hot ingredients, do not exceed the 1,250 ml mark on the jar. Always start by using Pulse, at least twice. Then select the desired speed. This procedure is the safest at the moment when steam escapes from the jar. Keep your hands and other exposed parts of the body away from the lid to prevent possible accidents, such as burns. Do not fill the jar over the 1,500 ml mark.
lquidos calientes o alimentos con temperaturas superiores a 80C. A esta temperatura el lquido no est hirviendo, pero produce una gran cantidad de vapor. Cuando lice ingredientes calientes, no supere la marca de 1250 ml de la jarra. Siempre empiece girando el botn de velocidad para Pulsar por lo menos dos veces. Entonces, selecione la velocidad deseada. Este procedimiento es el ms seguro en el momento que el vapor sale de la jarra. Mantenga las manos y otras partes expuesta del cuerpo lejos de la tapa y del orificio de la sobretapa para prevenir posibles quemaduras. No llene el vaso superando la marca de 1.500 ml.