870A-G54 / 870U-G54 series

MS-7599 (v3.x) Mainboard

G52-75991X8

Preface Copyright Notice

The material in this document is the intellectual property of MICRO-STAR INTERNATIONAL. We take every care in the preparation of this document, but no guarantee is given as to the correctness of its contents. Our products are under continual improvement and we reserve the right to make changes without notice.

Trademarks

All trademarks are the properties of their respective owners.

MSI is registered trademark of Micro-Star Intl Co.,Ltd. NVIDIA is registered trademark of NVIDIA Corporation. ATI is registered trademark of ATI Technologies, Inc. AMD is registered trademarks of AMD Corporation. Intel is registered trademarks of Intel Corporation. Windows is registered trademarks of Microsoft Corporation. AMI is registered trademark of American Megatrends Inc. Award is a registered trademark of Phoenix Technologies Ltd. Sound Blaster is registered trademark of Creative Technology Ltd. Realtek is registered trademark of Realtek Semiconductor Corporation. JMicron is registered trademark of JMicron Technology Corporation. Netware is a registered trademark of Novell, Inc.

Revision History

Revision V3.0 Revision History Release for Europe version Date March 2010

Technical Support

If a problem arises with your system and no solution can be obtained from the users manual, please contact your place of purchase or local distributor. Alternatively, please try the following help resources for further guidance.
Visit the MSI website for FAQ, technical guide, BIOS updates, driver updates, and other information: http://www.msi.com/index.php?func=service Contact our technical staff at: http://ocss.msi.com

MS-7599

Safety Instructions
Always read the safety instructions carefully. Keep this Users Manual for future reference. Keep this equipment away from humidity. Lay this equipment on a reliable flat surface before setting it up. The openings on the enclosure are for air convection hence protects the equipment from overheating. DO NOT COVER THE OPENINGS. connecting the equipment to the power inlet.
Make sure the voltage of the power source and adjust properly 110/220V before Place the power cord such a way that people can not step on it. Do not place anything over the power cord.
Always Unplug the Power Cord before inserting any add-on card or module. All cautions and warnings on the equipment should be noted. Never pour any liquid into the opening that could damage or cause electrical

shock.

If any of the following situations arises, get the equipment checked by service
personnel: The power cord or plug is damaged. Liquid has penetrated into the equipment. The equipment has been exposed to moist ure. The equipment does not work well or you can not get it work according to Users Manual. The equipment has dropped and damaged. The equipment has obvious sign of breakage.
DO NOT LEAVE THIS EQUIPMENT IN AN ENVIRONMENT UNCONDITIONED, STORAGE TEMPERATURE ABOVE 600 C (1400F), IT MAY DAMAGE THE EQUIPMENT. CAUTION: Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type recommended by the manufacturer. : For better environmental protection, waste batteries should be collected separately for recycling special disposal.
Preface FCC-B Radio Frequency Interference Statement
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the measures listed below. Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/television technician for help.

JFP1/ JFP2, En-16

CPU (Central Processing Unit)
When you are installing the CPU, make sure to install the cooler to prevent overheating. If you do not have the CPU cooler, consult your dealer before turning on the computer. For the latest information about CPU, please visit http://www.msi.com/index. php?func=cpuform2

Important

Overheating Overheating will seriously damage the CPU and system. Always make sure the cooling fan can work properly to protect the CPU from overheating. Make sure that you apply an even layer of thermal paste (or thermal tape) between the CPU and the heatsink to enhance heat dissipation. Replacing the CPU While replacing the CPU, always turn off the ATX power supply or unplug the power supplys power cord from the grounded outlet first to ensure the safety of CPU. Overclocking This mainboard is designed to support overclocking. However, please make sure your components are able to tolerate such abnormal setting, while doing overclocking. Any attempt to operate beyond product specifications is not recommended. We do not guarantee the damages or risks caused by inadequate operation or beyond product specifications.
CPU & Cooler Installation
When you are installing the CPU, make sure the CPU has a cooler attached on the top to prevent overheating. Meanwhile, do not forget to apply some thermal paste on CPU before installing the heat sink/cooler fan for better heat dispersion. Follow the steps below to install the CPU & cooler correctly. Wrong installation will cause the damage of your CPU & mainboard 1. Pull the lever sideways away from the socket. Make sure to raise the lever up to a 90-degree angle. 2. Look for the gold arrow of the CPU. The gold arrow should point as shown in the picture. The CPU can only fit in the correct orientation.
3. If the CPU is correctly installed, the pins should be completely embedded into the socket and can not be seen. Please note that any violation of the correct installation procedures may cause permanent damages to your mainboard.
4. Press the CPU down firmly into the socket and close the lever. As the CPU is likely to move while the lever is being closed, always close the lever with your fingers pressing tightly on top of the CPU to make sure the CPU is properly and completely embedded into the socket.
English 5. Position the cooling set onto the retention mechanism. Hook one end of the clip to hook first. 6. Then press down the other end of the clip to fasten the cooling set on the top of the retention mechanism. Locate the Fix Lever and lift up it.

You can barely see the golden finger if the memory module is properly inserted in the DIMM slot.

Power Supply

ATX 24-pin Power Connector: JPWR1
This connector allows you to connect an ATX 24-pin power supply. To connect the ATX 24-pin power supply, make sure the plug of the power supply is inserted in the proper orientation and the pins are aligned. Then push down the power supply firmly into the connector. You may use the 20-pin ATX power supply as you like. If youd like to use the 20-pin ATX power supply, please plug your power supply along with pin 1 & pin 13.
ATX 8-pin Power Connector: JPWR2
This connector is used to provide +12V power.
d n u d ro un nd.G ro u d 4.G ro un 3.G ro 2.G 1 V V.+ 2 V 8.+V 7.+6.+ 5
V.V.+ 2 V 2 1.+ +1 B OK 11 0. S R d 1.5V W un d 9.P ro 8.G 5V un 7.+ ro nd 6.G 5V u 5.+ ro 3V 4.G 3. 3V. 3.+ 3 2.+ 1
d n u ro V.G 5 V 3.+ +5 V d 2 2. 5 s n d 2 1.+ Re ou un d 2 0. Gr ro un # 2 9. G o N d 1 8. Gr -O un 1 7. PS o 1 6. Gr 2V V 1 5. 1.4.- +3. 1
Make sure that all the connectors are connected to proper ATX power supplies to ensure stable operation of the mainboard. Power supply of 350 watts (and above) is highly recommended for system stability.

Back Panel

LAN USB 2.0 Port USB 2.0 Port Serial Port Line-In RS-Out Line-Out CS-Out Mic Mouse/Keyboard USB 3.0 Port USB 2.0 Port SS-Out

Optical S/PDIF-Out

Optical S/PDIF-Out This S/PDIF (Sony & Philips Digital Interconnect Format) connector is provided for digital audio transmission to external speakers through an optical fiber cable. Mouse/Keyboard The standard PS/2 mouse/keyboard DIN connector is for a PS/2 mouse/keyboard. Serial Port The serial port is a 16550A high speed communications port that sends/ receives 16 bytes FIFOs. You can attach a serial mouse or other serial devices directly to the connector. USB 2.0 Port The USB (Universal Serial Bus) port is for attaching USB devices such as keyboard, mouse, or other USB-compatible devices. Supports data transfer rate up to 480Mbit/s (Hi-Speed). USB 3.0 Port USB 3.0 port is backward-compatible with USB 2.0 devices. Supports data transfer rate up to 5 Gbit/s (SuperSpeed).

If you want to use a USB 3.0 device, you must use the USB 3.0 cable to connect to the USB 3.0 port.
LAN The standard RJ-45 LAN jack is for connection to the Local Area Network (LAN). You can connect a network cable to it.
LED Left Color Yellow LED State Off On(Steady state) On(brighter & pulsing) Right Green Off On Orange On Condition LAN link is NOT established. LAN link is established. The computer is communicating with another computer on the LAN. 10 Mbits/sec data rate is selected. 100 Mbits/sec data rate is selected. 1000 Mbits/sec data rate is selected.

Yellow

Green/ Orange
Audio Ports These audio connectors are used for audio devices. It is easy to differentiate between audio effects according to the color of audio jacks. Line-In (Blue) - Line In, is used for external CD player, tape-player or other audio devices. Line-Out (Green) - Line Out, is a connector for speakers or headphones. Mic (Pink) - Mic, is a connector for microphones. RS-Out (Black) - Rear-Surround Out in 4/ 5.1/ 7.1 channel mode. CS-Out (Orange) - Center/ Subwoofer Out in 5.1/ 7.1 channel mode. SS-Out (Gray) - Side-Surround Out 7.1 channel mode.
Floppy Disk Drive Connector: FDD1
This connector supports 360 KB, 720 KB, 1.2 MB, 1.44 MB or 2.88 MB floppy disk drive.
* The MB layout in this figure is for reference only.
This connector supports IDE hard disk drives, optical disk drives and other IDE devices.

IDE Connector: IDE1

If you install two IDE devices on the same cable, you must configure the drives separately to master / slave mode by setting jumpers. Refer to IDE devices documentation supplied by the vendors for jumper setting instructions.
This connector is a high-speed Serial ATA interface port. Each connector can connect to one Serial ATA device.
Serial ATA Connector: SATA1~6
Please do not fold the Serial ATA cable into 90-degree angle. Otherwise, data loss may occur during transmission.
Chassis Intrusion Connector: JCI1
This connector connects to the chassis intrusion switch cable. If the chassis is opened, the chassis intrusion mechanism will be activated. The system will record this status and show a warning message on the screen. To clear the warning, you must enter the BIOS utility and clear the record.

d n u RU ro T.G IN 2.C 1

The fan power connectors support system cooling fan with +12V. When connecting the wire to the connectors, always note that the red wire is the positive and should be connected to the +12V; the black wire is Ground and should be connected to GND. If the mainboard has a System Hardware Monitor chipset on-board, you must use a specially designed fan with speed sensor to take advantage of the CPU fan control.
Fan Power Connectors: CPUFAN, SYSFAN1, SYSFAN2
d n u ro 2V or l.G 1 s o 1.+ en tr 2.S on 3.C 4
d n u ro 2V or.G 1 s 1.+ en 2.S 3

CPUFAN

SYSFAN1/ SYSFAN2
Please refer to the recommended CPU fans at processors official website or consult the vendors for proper CPU cooling fan. CPUFAN supports fan control. You can install Control Center utility that will automatically control the CPU fan speed according to the actual CPU temperature. Fan cooler set with 3 or 4 pins power connector are both available for CPUFAN.

CD-In Connector: JCD1

This connector is provided for external audio input.
d n u nd.L ro u 1.G ro 2.G 3.R 4
Front Panel Connectors: JFP1, JFP2
These connectors are for electrical connection to the front panel switches and LEDs. The JFP1 is compliant with Intel Front Panel I/O Connectivity Design Guide.

P o w e r

in P o 8. +.N 6 0.4 +. 2
S/PDIF-Out Connector: JSP1
This connector is used to connect S/PDIF (Sony & Philips Digital Interconnect Format) interface for digital audio transmission.

o w e r L

it E D
S/PDIF-Out Bracket (optional)

.+ 8. 6.+ 4. 2

ch it w d e tS rv se ED se e L e R D.R D 9.+ H 7.5.3.+ 1
D D in E LE P rL d o e n.N w e d 7.Po sp n 5.Su rou 3.G 1
This connector, compliant with Intel I/O Connectivity Design Guide, is ideal for connecting high-speed USB interface peripherals such as USB HDD, digital cameras, MP3 players, printers, modems and the like.
Front USB Connector: JUSB1 / JUSB2 / JUSB3
USB 2.0 Bracket (optional)
Note that the pins of VCC and GND must be connected correctly to avoid possible damage.
Front Panel Audio Connector: JAUD1
This connector allows you to connect the front panel audio and is compliant with Intel Front Panel I/O Connectivity Design Guide.
io ct te e D e n o n h io P ct # d e E a e Pin et C D EN.H 0 o 1. N I C ES d 8 n.M 6.PR ou 4 Gr. 2 n L e D n o N h E R P _S ne d o a E h e NS P.H E d 9. S ea R 7.H IC L 5.M I C 3.M 1
This connector connects to a TPM (Trusted Platform Module) module (optional). Please refer to the TPM security platform manual for more details and usages.
TPM Module connector: JTPM1
3 in p 2 ta in a p 1 d ta pin 0 n e s & da ta pi m s & da ta a ra re s F d s & d C ad dre ss & P re s.L C d d s 3 P a d re 1 1.L C a dd et 1.LP C a es k 9.LP C R loc 7.LP C C 5.L P C 3.LP 1 d n u nd r ro u n r e.G ro Pi we Q r ow 2. G o P o IR w e y p l 1.N 0 V ia o b 1.5 er P nd 8 S 3V ta. 6 3. S. 4.3V 2

Jumpers

There is a CMOS RAM onboard that has a power supply from an external battery to keep the data of system configuration. With the CMOS RAM, the system can automatically boot OS every time it is turned on. If you want to clear the system configuration, set the jumper to clear data.

Clear CMOS Jumper: JBAT1

Keep Data

Clear Data

You can clear CMOS by shorting 2-3 pin while the system is off. Then return to 1-2 pin position. Avoid clearing the CMOS while the system is on; it will damage the mainboard.

Switch

This mainboard provides the following switch for you to set the computers function. This section will explain how to change your mainboards function through the use of switch.
Easy OC Switch: OC_SW1 (optional)
You can overclock the FSB to increase the processor frequency by changing the switch. Follow the instructions below to set the FSB.

Default

Increase 10% speed of FSB
Increase 15% speed of FSB
Increase 20% speed of FSB
Make sure that you power off the system before setting the switch. When overclocking cause system instability or crash during boot. Please set the switch to default setting.

Button(optional)

The mainboard provides the following buttons for you to set the computers function. This section will explain how to change your mainboards function through the use of button.
OC Dial Button and OC Dial Knob: OC_GEAR1 & OC_DRIVE (optional)
The button and the knob are used to adjust the FSB.

OC Dial Button: OC_GEAR1

OC Dial Knob: OC_DRIVE
You can use them to change FSB clock at any time under the operating system. This method does not need to install software or reboot. Please follow the steps below to increase or decrease the FSB clock. 1. Press the OC Dial button to start adjustment. The OC Dial LED (optional) will light to indicate current operation. 2. Turn the OC Dial knob clockwise/anti-clockwise to increase/decrease FSB clock. You can set the value of OC Dial Step in BIOS. 3. Press the OC Dial button again to complete adjustment. The OC Dial LED (optional) will turn off automatically.
Before you use OC Dial function to overclock the system. In order to increase the success rate, you should set the voltage in BIOS properly. After each of the adjustments, this feature should be shut down. Otherwise, it would affect the system performance. Therefore, when you complete the adjustment, check whether OC Dial LED (optional) is on or off, if OC Dial LED (optional) is still lit, press the button and then check again.
PCIE (Peripheral Component Interconnect Express) Slot
The PCI Express slot supports the PCI Express interface expansion card.

PCI Express x16 Slot

PCI Express x1 Slot
PCI (Peripheral Component Interconnect) Slot

3. When all of the hardware and software has been properly set up and installed, reboot the system. After entering the O.S., click the CatalystTM Control Center icon on the desktop. There is a setting in the CatalystTM Control Center that needs to be enabled for CrossFireXTM to operate. The following aspect appears in CatalystTM Control Center:
Select the Advanced View from the view drop menu.
A CrossFireXTM system has four possible display modes:
SuperTiling Scissor Mode Alternate Frame Rendering Super Anti-aliasing.
for more details, please consult the graphics card manual from the manufacturer.

LED Status Indicators

CPU Phase LEDs

SOCKET AM3

These LEDs indicate the current CPU power phase mode. Follow the instructions below to read. Lights Off CPU is in 1 phase power mode. CPU is in 4 phase power mode.

BIOS Setup

This chapter provides basic information on the BIOS Setup program and allows you to configure the system for optimum use. You may need to run the Setup program when: An error message appears on the screen during the system booting up, and requests you to run BIOS SETUP. You want to change the default settings for customized features.
The items under each BIOS category described in this chapter are under continuous update for better system performance. Therefore, the description may be slightly different from the latest BIOS and should be held for reference only. Upon boot-up, the 1st line appearing after the memory count is the BIOS version. It is usually in the format:
A7599AMS V10.X 030810 where: 1st digit refers to BIOS maker as A = AMI, W = AWARD, and P = PHOENIX. 2nd - 5th digit refers to the model number. 6th digit refers to the chipset as I = Intel, N = NVIDIA, A = AMD and V = VIA. 7th - 8th digit refers to the customer as MS = all standard customers. V10.X refers to the BIOS version. 030810 refers to the date this BIOS was released.

Entering Setup

Power on the computer and the system will start POST (Power On Self Test) process. When the message below appears on the screen, press <DEL> key to enter Setup.

Press DEL to enter SETUP

If the message disappears before you respond and you still wish to enter Setup, restart the system by turning it OFF and On or pressing the RESET button. You may also restart the system by simultaneously pressing <Ctrl>, <Alt>, and <Delete> keys.

Getting Help

After entering the Setup menu, the first menu you will see is the Main Menu. Main Menu The main menu lists the setup functions you can make changes to. You can use the arrow keys ( ) to select the item. The on-line description of the highlighted setup function is displayed at the bottom of the screen. Sub-Menu If you find a right pointer symbol appears to the left of certain fields that means a submenu can be launched from this field. A sub-menu contains additional options for a field parameter. You can use arrow keys ( ) to highlight the field and press <Enter> to call up the sub-menu. Then you can use the control keys to enter values and move from field to field within a sub-menu. If you want to return to the main menu, just press the <Esc >.

General Help <F1>

The BIOS setup program provides a General Help screen. You can call up this screen from any menu by simply pressing <F1>. The Help screen lists the appropriate keys to use and the possible selections for the highlighted item. Press <Esc> to exit the Help screen.
The Main Menu Once you enter BIOS CMOS Setup Utility, the Main Menu will appear on the screen. The Main Menu allows you to select from the setup functions and two exit choices. Use arrow keys to select among the items and press <Enter> to accept or enter the sub-menu.
Standard CMOS Features Use this menu for basic system configurations, such as time, date etc. Advanced BIOS Features Use this menu to setup the items of the BIOS special enhanced features. Integrated Peripherals Use this menu to specify your settings for integrated peripherals. Power Management Setup Use this menu to specify your settings for power management. H/W Monitor This entry shows your PC health status. Green Power Use this menu to specify the power phase. BIOS Setting Password Use this menu to set the password for BIOS. Cell Menu Use this menu to specify your settings for frequency/voltage control and overclocking.
English M-Flash Use this menu to read/ flash (or backup) the BIOS from (to) storage drive (FAT/ FAT32 format only). Overclocking Profile Use this menu to save/ load your settings to/ from CMOS for BIOS. Load Fail-Safe Defaults Use this menu to load the default values set by the BIOS vendor for stable system performance. Load Optimized Defaults Use this menu to load the default values set by the mainboard manufacturer specifically for optimal performance of the mainboard. Save & Exit Setup Save changes to CMOS and exit setup. Exit Without Saving Abandon all changes and exit setup.
When enter the BIOS Setup utility, follow the processes below for general use. 1. Load Optimized Defaults : Use control keys () to highlight the Load Optimized Defaults field and press <Enter> , a message as below appears:
Select [Ok] and press Enter to load the default settings for optimal system performance. 2. Setup Date/ Time : Select the Standard CMOS Features and press <Enter> to enter the Standard CMOS Features-menu. Adjust the Date, Time fields.
3. Save & Exit Setup : Use control keys () to highlight the Save & Exit Setup field and press <Enter> , a message as below appears:
Select [Ok] and press Enter to save the configurations and exit BIOS Setup utility.
The configuration above are for general use only. If you need the detailed settings of BIOS, please see the English manual on MSI website.
English 4. Cell Menu Introduction : This menu is for advanced user who want to overclock the mainboard.
Change these settings only if you are familiar with the chipset.
Current CPU/ DRAM/ CPU-NB Frequency These items show the current clocks of CPU/ Memory & CPU-NB speed. Read-only.

CPU Specifications Press <Enter> to enter the sub-menu. This submenu shows the information of installed CPU. CPU Technology Support Press <Enter> to enter the sub-menu. This sub-menu shows the technologies that the installed CPU supported. CPU Feature Press <Enter> to enter the sub-menu. AMD CoolnQuiet The CoolnQuiet technology can effectively and dynamically lower CPU speed and power consumption.
To ensure that CoolnQuiet function is activated and will be working properly, it is required to double confirm that:
Run BIOS Setup, and select Cell Menu. Under Cell Menu, find AMD CoolnQuiet, and set this item to Enabled. Enter Windows, and select [Start]->[Settings]>[Control Panel]->[Power Options]. Enter Power Options Properties tag, and select Minimal Power Management under Power schemes. C1E Support To enable this item to read the CPU power consumption while idle. Not all processors support Enhanced Halt state (C1E). SVM Support This item is used to enable/ disable SVM. AMD CoolnQuiet The CoolnQuiet technology can effectively and dynamically lower CPU speed and power consumption. C1E Support To enable this item to read the CPU power consumption while idle. Not all processors support Enhanced Halt state (C1E). Adjust CPU FSB Frequency (MHz) This item allows you to select the CPU Front Side Bus clock frequency (in MHz).
English OC Stepping This item will be enabled after you set the overclocking frequency in the Adjust CPU FSB Frequency (MHz). And the following items will appear. This items will help the system to overclock step by step after system booting up. Start OC Stepping From (MHz) This item is used to set the initial FSB clock. The system will boot with the initial FSB clock, and start to overclock from initial FSB clock to set FSB clock that you set in Adjust CPU FSB Frequency (MHz) step by step. OC Step This item is used to set how many steps for FSB colck overclocking. OC Step Count Timer This item is used to set the buffer time for every step. Adjust CPU Ratio This item is used to adjust CPU clock multiplier (ratio). It is available only when the processor supports this function. Adjusted CPU Frequency (MHz) It shows the adjusted CPU frequency. Read-only. Adjust CPU-NB Ratio This item is used to adjust CPU-NB ratio. Adjusted CPU-NB Frequency (MHz) It shows the adjusted CPU-NB frequency. Read-only. CPU Core Control This item allows you to select the number of active processor cores. OC Genie Lite Setting this item to [Enabled] allows the system to detect the maximum FSB clock and to overclock automatically. If overclocking fails to run, you can try the lower FSB clock for overclocking successfully. OC Dial Function This item allows you to enable/disable the OC Dial function. Setting to [Enabled] activates the following fields, and use the following fields to set each OC Dial function. OC Dial Step This item is used to set value of each step when you rotate the OC dial knob. OC Dial Reset Select [Reset] if you need to reset the OC Dial Value. OC Dial Value This item indicates the overclocking value by OC dial function. When you rotate the OC dial knob, this value will change.

OC Dial Adjusted FSB Clock (MHz) It shows the adjusted FSB clock by OC Dial function (FSB Clock +OC Dial Value). Read-only. MEMORY-Z Press <Enter> to enter the sub-menu. DIMM1~4 Memory SPD Information Press <Enter> to enter the sub-menu. The sub-menu displays the information of installed memory. Advance DRAM Configuration Press <Enter> to enter the sub-menu. DRAM Timing Mode This field has the capacity to automatically detect all of the DRAM timing. DRAM Drive Strength This item allows you to control the memory data bus signal strength. Increasing the drive strength of the memory bus can increase stability during overclocking. DRAM Advance Control This field has the capacity to automatically detect the advanced DRAM timing. 1T/2T Memory Timing This item controls the SDRAM command rate. Select [1T] makes SDRAM signal controller to run at 1T (T=clock cycles) rate. Selecting [2T] makes SDRAM signal controller run at 2T rate. DCT Unganged Mode This feature is used to Integrate two 64-bit DCTs into a 128-bit interface. Bank Interleaving Bank Interleaving is an important parameter for improving overclocking capability of memory. It allows system to access multiple banks simultaneously. Power Down Enable This is a memory power-saving technology. When the system does not access memory over a period of time, it will automatically reduce the memory power supply. MemClk Tristate C3/ATLVID This setting allows you to enable/disable the MemClk Tristating during C3 and ATLVID. FSB/DRAM Ratio This item allows you to select the ratio of FSB/ DRAM. Adjusted DRAM Frequency (MHz) It shows the adjusted Memory frequency. Read-only.
English HT Link Control Press <Enter> to enter the sub-menu. HT Incoming/ Outgoing Link Width These items allow you to set the Hyper-Transport Link width. Setting to [Auto], the system will detect the HT link width automatically. HT Link Speed This item allows you to set the Hyper-Transport Link speed. Setting to [Auto], the system will detect the HT link speed automatically. Adjusted HT Link Frequency (MHz) It shows the adjusted HT Link frequency. Read-only. Adjust PCI-E Frequency (MHz) This field allows you to select the PCIE frequency (in MHz). Auto Disable DRAM/PCI Frequency When set to [Enabled], the system will remove (turn off) clocks from empty DRAM DIMMs/ PCI slots to minimize the electromagnetic interference (EMI). CPU Voltage (V)/ CPU-NB Voltage (V)/ DRAM Voltage (V)/ NB Voltage (V/ SB Voltage (V))/ HT Link Voltage (V) These items are used to adjust the voltage of CPU, Memory and chipset. Spread Spectrum When the mainboards clock generator pulses, the extreme values (spikes) of the pulses create EMI (Electromagnetic Interference). The Spread Spectrum function reduces the EMI generated by modulating the pulses so that the spikes of the pulses are reduced to flatter curves.

. , , . ( ) . CPU CPU, , . . , . , . , .
. , , , . . . 1. , . 2. (gold arrow) CPU. , . CPU .
3. CPU , . , CPU .
4. CPU . CPU , CPU , .

5. . . 6. , . .

8. CPU .

. . , .

DIMM . http://www.msi.com/index.php?func=testreport DDR3
240-, 1.5V 72x2=144 48x2=96

2 . . .

DDR3 DDR2, DDR3 . DDR3 DDR3 DIMM. , . , DIMM1. - , 15+ ( 16) 4 .
1. . . 2. DIMM . , DIMM. , . 3. , DIMM .

, DIMM.

24- ATX: JPWR1
24- ATX. , . . 20- ATX . 20- , 1 13.

8- ATX: JPWR2

12V.
, ATX . 350 ( ).
S/PDIF-Out USB 2.0 USB 2.0 LAN RS- CS- SS- / USB 3.0 USB 2.0
S/PDIF-Out S/PDIF (Sony & Philips Digital Interconnect Format) . / DIN PS/2 / PS/2. 16550A 16- FIFO. . USB 2.0 USB (Universal Serial Bus) USB , , . 480/ (HiSpeed). USB 3.0 USB 3.0 USB 2.0. 5 Gbit/s (SuperSpeed).
USB 3.0, USB 3.0 USB 3.0.

LAN RJ-45 (LAN). .

LED. . LED () ( & ). . LAN . LAN . LAN. 10 /. 100 /. 1000 /.
. , , . () - , CD , . () - . () - . RS () - 4/ 5.1/ 7.1. CS () - 5.1/ 7.1. SS () - 7.1.

FDD: FDD1

FDD 360KB, 720KB, 1.2MB, 1.44MB 2.88MB.

* .

IDE: IDE1

IDE, IDE.

, master/ slave . .

Serial ATA: SATA1~6

Serial ATA. Serial ATA Serial ATA.

, , Serial ATA. .

: JCI1

, . . . BIOS.

: CPUFAN, SYSFAN1, SYSFAN2
+12. , +12, - GND. , .
, , , . CPUFAN . , , Control Center. CPUFAN , 3, 4.

CD-In: JCD1

: JFP1, JFP2
, . JFP1 Intel Front Panel I/O Connectivity Design.

S/PDIF-Out: JSP1

S/PDIF (Sony & Philips Digital Interconnect Format) .

S/PDIF-Out ()

USB : JUSB1 / JUSB2 / JUSB3
, Intel I/O Connectivity Design, , USB HDD, , MP3 , , .

M-Flash / ( ) BIOS () ( FAT/ FAT32). Overclocking Profile / / CMOS BIOS. Load Fail-Safe Defaults . BIOS,
Load Optimized Defaults ( ) . Save & Exit Setup ( ) CMOS . Exit Without Saving ( ) .
, BIOS, . 1. Load Optimized Defaults : ( ) Load Optimized Defaults <Enter> , :
[Ok], . 2. Setup Date/ Time : Standard CMOS Features <Enter> . .
3. Save & Exit Setup : ( ) Save & Exit Setup <Enter>, :

[Ok], BIOS Setup.

. BIOS, - MSI.

4. Cell Menu: .

, .
Current CPU/ DRAM/ CPU-NB Frequency CPU CPU-NB. .
CPU Specifications <Enter> . CPU. CPU Technology Support <Enter> . , CPU. . CPU Feature <Enter> . AMD CoolnQuiet CoolnQuiet CPU .

, CoolnQuiet , :

BIOS Setup, Cell Menu. AMD CoolnQuiet Cell Menu, Enabled. Windows [Start]->[Settings]->[Control Panel]->[Power Options]. Power Options Properties, Minimal Power Management Power schemes. C1E Support CPU, . Enhanced Halt state (C1E). SVM Support / SVM. AMD CoolnQuiet CoolnQuiet CPU . C1E Support CPU, . Enhanced Halt state (C1E). Adjust CPU FSB Frequency () FSB ( ).
OC Stepping Adjust CPU FSB Frequency (). . . Start OC Stepping From () (FSB clock). (FSB clock), Adjust CPU FSB Frequency (). OC Step FSB. OC Step Count Timer . Adjust CPU Ratio . , . Adjusted CPU Frequency () CPU. . Adjust CPU-NB Ratio CPU-NB. Adjusted CPU-NB Frequency () CPU NB. . CPU Core Control . OC Genie Lite [Enabled] FSB . , FSB . OC Dial Function / OC Dial. [Enabled] , . OC Dial Step OC Dial. OC Dial Reset [Reset], OC Dial Value. OC Dial Value OC Dial. OC Dial, .
OC Dial Adjusted FSB Clock () FSB, OC Dial (FSB Clock +OC Dial Value). . MEMORY-Z <Enter> . DIMM1~4 Memory SPD Information <Enter> . . Advance DRAM Configuration <Enter> . DRAM Timing Mode DRAM. DRAM Drive Strength . . DRAM Advance Control DRAM. 1T/2T Memory Timing SDRAM. [1T] SDRAM 1T (T=clock cycles). [2T] SDRAM 2T. DCT Unganged Mode 64- DCT 128. Bank Interleaving Bank Inter leaving , . . Power Down Enable . , . MemClk Tristate C3/ATLVID / C3 ATLVID. FSB/DRAM Ratio FSB DRAM. Adjusted DRAM Frequency () . . Ru-34
HT Link Control <Enter> . HT Incoming/ Outgoing Link Width / HT. [Auto], HT. HT Link Speed HyperTransport. [Auto], HT. Adjusted HT Link Frequency () HT. . Adjust PCI-E Frequency () PCIE ( ). Auto Disable DRAM/PCI Frequency [Enabled], PCI, (EMI). CPU Voltage (V)/ CPU-NB Voltage (V)/ DRAM Voltage (V)/ NB Voltage (V/ SB Voltage (V))/ HT Link Voltage (V) CPU, , . Spread Spectrum , - EMI (Electromagnetic Interference). Spread Spectrum , .

PROCESSORS Cash Price AMD SOCKET AM2/AM2+ MOTHERBOARD Cash Price MEMORY ( SDR / DDR1 / DDR2 / DDR3 ) Cash Price AMD SEMPRON 140 AM3 2.70GHz 1,450 BIOSTAR N68S3 ( AM3 ) DDR3 1,950 128MB SDR PC100 / PCAMD ATHLON II X(DUAL CORE) 2.90GHz AM3 2,350 ASUS M2N68 AM PLUS ( AM2 / AM2+ ) 2,399 256MB SDR PCAMD ATHLON II X(DUAL CORE) 3.0GHz AM3 2,550 ASUS M4N68T-M LE ( AM2 / AM2+ / AM3 ) DDR3 2,450 512MB SDR PC133 1,350 AMD ATHLON II X(TRIPLE CORE) 3.10GHz AM3 3,499 ASUS M4A78LT-M LE ( AM3 ) DDR3 3,150 256MB DDR 333 PCAMD ATHLON II X(QUAD CORE) 3.0GHz AM3 4,750 ASUS M4A88T-M ( AM3 ) DDR3 4,350 256MB DDR 400 PCAMD PHENOM II X(DUAL CORE) 3.20GHz AM3 4,350 ASUS M4A88TD-V EVO (AM2 / AM2+ / AM3) DDR3 6,650 512MB DDR 266 PCAMD PHENOM II X(QUAD CORE) 3.20GHz AM3 6,750 EMAXX EMX-MCP61D3 iCAFE ( DDR3 ) 2,050 512MB DDR 333 PCAMD PHENOM II X6 1055T (HEXA CORE) 2.80GHz 8,750 EMAXX EMX-AMD880G-FXN ( DDR2 / DDR3 ) 3,250 512MB DDR 400 PCASROCK M3A785GM-LE ( AM2 / AM2+ / AM3 ) DDR AMD PHENOM II X6 1075T (HEXA CORE) 3.0GHz 9,850 3,150 1024MB / 1GB DDR 333 PC2700 1,699 AMD PHENOM II X6 1090T (HEXA CORE) 3.20GHz 11,650 MSI 870A-G54 ( AM3 ) AMD870, DDR3 5,150 1024MB / 1GB DDR 400 PC3200 1,850 AMD PHENOM II X6 1100T (HEXA CORE) 3.30GHz 13,999 MSI 870-G45 ( AM3 ) AMD870, DDR3 4,100 KINGSTON 512MB DDR 333 1,450 INTEL CELERON DUAL CORE E3400 2.60Ghz 800mhz 2,150 MSI K9N2GM-FIH ( AM2 / AM2+ ) HYBRID SLI 3,599 KINGSTON 512MB DDR 400 1,499 INTEL PENTIUM DUAL CORE E5800 3.20GHz 3,100 MSI 785GM-E51 ( AM2 / AM2+ / AM3 ) DDR3 4,050 KINGSTON 1GB DDR 333 2,450 INTEL CORE2DUO E7500 2.93GHz 4,950 MSI 785GTM-E45 ( AM2 / AM2+ / AM3 ) DDR2 3,650 KINGSTON 1GB DDR 400 2,550 INTEL CORE i3.06GHz (DUAL CORE) HT 4 threads 5,100 MSI 770-G45 ( AM3 ) AMD 770, DDR3 3,499 256MB DDR299 INTEL CORE i3.20GHz (DUAL CORE) HT 4 threads 5,650 MSI 760GM-P33 ( AM3 ) AMD 760, DDR3 2,699 512MB DDR450 MSI 740GTM-P25 ( AM2 / AM2+ / AM3 ) AMD 740 INTEL CORE i3.10GHz (DUAL CORE) HT (1155) 5,950 2,650 KINGSTON 256MB DDR550 INTEL CORE i2.80GHz / 3.10GHz (QUAD CORE) 8,399 MSI GF615M-P33 ( AM3 ) DDR3 2,550 KINGSTON 512MB DDR850 INTEL CORE i3.40GHz / 3.80GHz (QUAD CORE) 13,850 MSI NF725GM ( AM2 / AM2+ / AM3 ) DDR3 2,499 KINGSTON / TRANSCEND 1GB DDR1,450 INTEL CORE i7 2600K 3.40GHz / 3.80GHz (QUAD CORE 14,999 GIGABYTE GA-M68N-S2P ( AM2 / AM2+ / AM3 ) 2,350 TRANSCEND 256MB DDR300 P4 SOCKET LGA775 MOTHERBOARD Cash Price GIGABYTE GA-MA74GM-S2 ( AM2 / AM2+ / AM3 ) 2,899 TRANSCEND / KINGMAX 512MB DDR599 ASUS P5KPL-AM EPU ( INTEL G31 ) GIGABIT LAN 2,250 GIGABYTE GA-MA74GMT-S2 ( DDR3 ) 3,050 TRANSCEND 2GB DDRDUAL KIT 1,950 ASUS P5LD2-X/1333 2,999 GIGABYTE GA-MA785GM-US2H ( AM2 / AM2+ / AM 4,150 TRANSCEND 4GB DDRDUAL KIT 3,850 ASUS P5QPL-AM ( INTEL G41 ) 2,499 GIGABYTE GA-880GM-UD2H ( AM3 ) DDR3 4,350 KINGSTON 512MB DDR650 ASUS P5G41-M LE ( INTEL G41 ) " DVI " 2,650 GIGABYTE GA-890GPA-UD3H ( AM3 ) DDR3 7,250 KINGSTON 1GB DDR799 ASUS P5G41C-M LX ( INTEL G41 ) DDR2 / DDR3 2,799 VIDEO CARDS ( AGP / PCI EXPRESS) Cash Price KINGSTON 2GB DDR1,599 ASUS P5QL SE ( INTEL G43 ) 3,750 GeFORCE FX5500 8X 256MB 128BIT 1,450 TRANSCEND 512MB DDR699 ASUS P5QPL-VM EPU ( INTEL G41 ) 4,100 nVIDIA GeFORCE 8400GS 512MB PCIE 1,399 1GB DDR799 4,499 nVIDIA GeFORCE 8400GS 1GB PCIE DDR3 1,799 2GB DDR1,450 ASUS P5QL PRO ASUS P5QL-EM ( INTEL G43 ) 4,850 nVIDIA GeFORCE GF210 1GB PCIE DDR3 1,899 TRANSCEND 1GB DDRDUAL KIT 1,100 ASUS P7H55-M LX (DDR3) CORE i3 / i5 / i7 ( 1156 ) 4,150 nVIDIA GeFORCE 9500GT 1GB PCIE DDR2 2,350 TRANSCEND 2GB DDRDUAL KIT 2,350 ASUS P8H61-M LE (DDR3) ( SOCKET 1155 ) 4,650 nVIDIA GeFORCE GT220 1GB PCIE DDR2 2,499 TRANSCEND 4GB DDRDUAL KIT 4,250 ASUS P8P67 LE (DDR3) ( SOCKET 1155 ) 5,650 nVIDIA GeFORCE GT220 1GB PCIE DDR3 2,699 CORSAIR XMS2 4GB DDRDUAL KIT 4,599 FOXCONN H55MXV (DDR3) CORE i3 / i5 / i7 ( 1156 ) 2,999 nVIDIA GeFORCE GT240 1GB PCIE DDR3 3,199 KINGSTON 512MB DDR750 EMAXX IH55M-ICAFE (DDR3) CORE i3 / i5 / i7 ( 1156 ) 2,999 nVIDIA GeFORCE GT240 1GB PCIE DDR5 3,950 KINGSTON 1GB DDR799 EMAXX IH61-ICAFE (DDR3) CORE i3 / i5 / i7 ( 1155 ) 3,150 nVIDIA GeFORCE GTX 260 896MB DDR3 448bit 6,999 KINGSTON 2GB DDR1,350 BIOSTAR G41D3 ( 1333MHz FSB ) DDR3 1,950 nVIDIA GeFORCE GT 430 1GB DDR3 128bit 2,999 OCZ GOLD SERIES 2GB DDR1,699 ASROCK G41M-VS3 / EMAXX IG41D3 ( DDR3 ) 2,050 nVIDIA GeFORCE GT 430 2GB DDR3 128bit 3,650 GEIL 2GB DDRw/ HEAT SPREADER 2,450 ASROCK H55M-LE (DDR3) CORE i3 / i5 / i7 ( 1156 ) 2,999 nVIDIA GeFORCE GT 440 1GB DDR5 128bit 4,250 1GB DDR599 MSI 975X PLATINUM INTEL 975 CHIPSET 7,699 GeFORCE GTS 450 1GB DDR5 128bit 5,150 2GB DDR950 MSI G41M4-F ( 1333MHz FSB ) 2,499 GeFORCE GTS 450 1GB DDR5 128bit SONIC 5,950 4GB DDR1,850 MSI G41M-P28 ( 1333MHz FSB ) INTEL G41 "DDR3" 2,550 GeFORCE GTX 460 1GB DDR5 256bit SMART 7,650 GEIL 2GB DDR1,450 MSI H55M-E32 (DDR3) CORE i3 / i5 / i7 READY ( 1156 ) 4,100 GeFORCE GTX 460 1GB DDR5 256bit SONIC 8,599 KINGSTON 1GB DDR750 MSI H61MU-E35 (DDR3) CORE i5 / 17 READY (1155 ) 4,100 GeFORCE GTX 460 1GB DDR5 256bit SONIC Plat. 9,950 KINGSTON 2GB DDR1,100 MSI H67MA-E35 (DDR3) CORE i5 / 17 READY (1155 ) 4,950 GeFORCE GTX 550Ti 1024MB DDR5 192bit 6,950 KINGSTON 4GB DDR2,100 MSI H67MA-E45 (DDR3) CORE i5 / 17 READY (1155 ) 5,550 GeFORCE GTX 550Ti SONIC1024MB DDR5 192bit 7,950 KINGSTON 512MB DDR 333 SODIMM 1,650 MSI P67A-C45 (DDR3) CORE i5 / 17 READY (1155 ) 7,499 GeFORCE GTX 560Ti SONIC 1024MB DDR5 256bit 12,300 KINGSTON 512MB DDR 400 SODIMM 1,699 MSI P67A-GD55 (DDR3) CORE i5 / 17 READY (1155 ) 8,750 nVIDIA GeFORCE GTX 570 1280MB DDR5 320bit 16,500 KINGSTON 1GB DDR 333 SODIMM 2,999 MSI P67A-GD65 (DDR3) CORE i5 / 17 READY (1155 ) 9,850 nVIDIA GeFORCE GTX 580 1536MB DDR5 384bit 23,500 KINGSTON 1GB DDR 400 SODIMM 3,450 GIGABYTE GA-G31M-ES2C ( 1333MHz FSB ) INTEL G31 2,199 ATI RADEON HD 4670 1GB DDR3 128bit PCIE 2,950 TRANSCEND 512MB DDRSODIMM 550 GIGABYTE GA-G41M-ES2L ( 1333MHz FSB ) INTEL G41 2,699 ATI RADEON HD 5450 512MB DDR2 PCIE 2,050 KINGSTON 1GB DDRSODIMM 1,350 GIGABYTE GA-G41MT-D3 ( DDR3 ) INTEL G41 2,850 ATI RADEON HD 5670 1GB DDR5 PCIE 4,499 KINGSTON 2GB DDRSODIMM 2,450 GIGABYTE GA-H55M-S2 CORE i3 / i5 / i7 READY ( 1156 3,999 ATI RADEON HD 5770 1GB DDR5 PCIE 6,650 TRANSCEND 1GB DDRSODIMM 1,299 GIGABYTE GA-H61M-D2P ( SOCKET 1155 ) 4,250 ATI RADEON HD 6850 1GB DDR5 PCIE 8,550 KINGSTON 2GB DDRSODIMM 1,899 INTEL BLKDG41WV ( 1333MHz FSB ) DDR3 2,550 ATI RADEON HD 6870 1GB DDR5 PCIE 10,950 KINGSTON 2GB DDRSODIMM 1,250 INTEL BLKDH55PJ (DDR3) CORE i3 / i5 / i7 READY ( 115 3,750 ATI RADEON HD 6950 2GB DDR5 PCIE 13,500 KINGSTON 4GB DDRSODIMM 2,350 INTEL BLKDH67BL (DDR3) CORE i5 / i7 READY ( 1155 ) 4,899 ATI RADEON HD 6970 2GB DDR5 PCIE 17,500

Cash Price 950 1,100 1,3,1,050 1,150 1,650 1,750 3,950 8,550 Cash Price 250 Cash Price 1,950 3,250 2,699 3,699 7,550 9,899 1,699 2,150 3,250 3,650 4,850 3,899 5,399 Cash Price 1,750 1,899 3,250 3,950 OCZ MOD XSTREAM-PRO 500WATTS ( MODULAR 3,150 CORSAIR TX650W 650WATTS 5,250 HEC RAPTOR II 500WATTS 2,350 HEC COUGAR RS550 550WATTS 2,950 HEC COUGAR CMX700 700WATTS ( MODULAR ) 4,450 HEC COUGAR GX1050 1050WATTS ( MODULAR ) 7,650 GIGABYTE SUPERB 550WATTS 2,350 GIGABYTE SUPERB 720WATTS 4,699 ZUMAX 625WATTS ( MODULAR ) 2,850 ZUMAX 750WATTS ( MODULAR ) 3,699 iCUTE 550WATTS 1,750 iCUTE 650WATTS ( MODULAR ) 3,750 iCUTE 750WATTS ( MODULAR ) 4,350 iCUTE 1000WATTS ( MODULAR ) 6,250 HD MEDIA PLAYER Cash Price WD ELEMENTS PLAY w/ BUILT-IN 1TB HDD 6,850 SEAGATE GO FLEX TV 6,100 XTREAMER w/ SIDEWINDER COOLER 5,250 XTREAMER WIFI ANTENNA 1,199 LAPTOP POWER ADAPTER Cash Price HUNTKEY 65W ( for 3.4A and below ) 1,199 HUNTKEY 90W 1,499
DVD ROM / DVD RW DRIVE HP DVD-RW 24X SATA HP DVD-RW 24X SATA LIGHTSCRIBE LITEON DVD-RW 22X ( IDE ) SAMSUNG DVD-RW 22X SATA SAMSUNG BD COMBO ( BD-ROM + DVDRW ) LITEON DVD-RW 24X SATA LITEON DVD-RW 24X SATA LABELTAG LITEON DVD-RW 24X SATA LIGHTSCRIBE LITEON DVDRW 8X EXT. SLIM SAMSUNG DVDRW 8X EXT. SLIM LITEON BD COMBO ( BD-ROM + DVDRW ) LITEON BLU-RAY WRITER + DVDRW FLOPPY DRIVE / CARD READER ALL IN 1 INTERNAL CARD READER PRINTERS CANON iP2770 CANON MPIN 1 PRINTER EPSON T13 PHOTO USB EPSON TX121 3-IN-1 PRINTER EPSON LX300+ EPSON LQ300 HP D1660 HP D2660 HP F2480 ( PRINTER, SCANNER, COPIER) BROTHER DCP195C 4 IN 1 PRINTER BROTHER MFC3360C 6 IN 1 PRINTER SAMSUNG ML1660 LASER PRINTER HP LASERJET 1102 POWER SUPPLY ATX 500WATTS 20 + 4 pins ATX 600WATTS 20 + 4 pins ACBEL CEMAX POWER ACBEL 550WATTS ACBEL R8 II 550WATTS ( 80 PLUS BRONZE ) ACBEL R8 II 650WATTS ( 80 PLUS BRONZE )
Cash Price 1,799 160GB WESTERN DIGITAL 7200RPM ( IDE ) 2,399 250GB WESTERN DIGITAL ( SATA ) 1,450 320GB WESTERN DIGITAL ( IDE ) 3,299 320GB SAMSUNG / WD ( SATA ) 1,699 320GB SEAGATE 7200RPM ( SATA ) 1,850 500GB WESTERN DIGITAL ( IDE ) 4,100 500GB SAMSUNG / WD ( SATA ) 1,850 500GB SEAGATE 7200RPM ( SATA ) 1,999 640GB WESTERN DIGITAL ( SATA ) 2,399 640GB WD BLACK ( DUAL PROC.) "SATA 3" 2,850 1TB WD / SAMSUNG SATA 2,850 1TB WD CAVIAR BLACK ( DUAL PROC.) 4,100 1000GB / 1TB SEAGATE 7200RPM SATA 2,999 1500GB / 1.5TB WD CAVIAR (64mb cache) 3,699 1500GB / 1.5TB SEAGATE (32mb cache) 4,100 2TB WD CAVIAR SATA (64mb cache) 4,499 2TB SEAGATE (64mb cache) SATA3 4,950 2TB WD CAVIAR BLACK ( DUAL PROC.) 7,599 2500GB / 2.5TB WD CAVIAR (64mb cache) 8,950 3000GB / 3TB WD CAVIAR (64mb cache) 10,500 300GB WD VELOCIRAPTOR (10k RPM) 8,899 450GB WD VELOCIRAPTOR (10k RPM) 11,800 600GB WD VELOCIRAPTOR (10k RPM) 13,500 160GB SAMSUNG / WD 2.5" ( IDE ) 2,950 250GB SEAGATE 2.5" ( SATA ) 2,100 320GB SAMSUNG / WD 2.5" ( SATA ) 2,150 320GB SEAGATE 2.5" ( SATA ) 2,550 500GB SAMSUNG / WD 2.5" ( SATA ) 3,100 500GB SEAGATE 2.5" ( SATA ) 3,350 500GB WD BLACK 7200RPM 2.5" (SATA) 3,899 640GB WD 5400RPM 2.5" ( SATA ) 4,100 750GB WD 5400RPM 2.5" ( SATA ) 5,499 SPEAKERS Cash Price ALTEC LANSING BXR1221 1,499 ALTEC LANSING VS4621 3,599 D'SOUND MD'SOUND M605R ( w/ FM TUNER ) 1,750 EDIFIER M1350 / X100 SPEAKER ( 2.1 ) 999 EDIFIER M1385 SPEAKER w/ FM TUNER 1,950 EDIFIER M1550 SPEAKER ( 5.1 ) 2,599 DELKIN 2.1 SPEAKER w/ USB/SD SLOT 1,250 LOGITECH R-5 SPEAKER 450 LOGITECH S-150 USB SPEAKER 550 LOGITECH Z103 SPEAKER 950 LOGITECH Z313 SPEAKER 1,599 LOGITECH Z506 SPEAKER (5.1) 4,250 X-MINI v1.1 CAPSULE SPEAKER 999 X-MINI II CAPSULE SPEAKER 1,450 X-MINI MAX II CAPSULE SPEAKER 2,350 X-MINI HAPPY CAPSULE SPEAKER 3,650 SOUND CARD Cash Price 4 CHANNEL PCI 32BIT CHANNEL PCI 32BIT 399 PROJECTOR Cash Price INFOCUS IN102 w/ TRIPOD 22,999 EPSON EB-S10 w/ TRIPOD 25,500

HARD DISK 80GB SEAGATE 7200RPM ( SATA )
LCD MONITORS Cash Price KEYBOARD Cash Price 15.6" FOCUS LED WIDESCREEN 3,150 GENIUS KEYBOARD PS/15.6" LG LCD WIDESCREEN 3,350 A4TECH KEYBOARD PS/15.6" LG LED WIDESCREEN 3,650 LOGITECH CLASSIC KEYBOARD PS/16" ILLUMINA / LIKOM LED WIDESCREEN 2,999 A4TECH KEYBOARD USB (B/W) 320 17" FOCUS LCD WIDESCREEN 3,650 A4TECH SMART DESKTOP KB + MSE ( PS/2 ) 450 18.5" ASTONE WIDESCREEN MONITOR LCD 3,999 A4TECH SMART DESKTOP KB + MSE ( USB ) 499 18.5" ACER eMACHINES WIDESCREEN MONITOR LCD 4,199 A4TECH X7 G300 GAMING KEYBOARD 650 18.5" LG WIDESCREEN MONITOR LCD 4,650 A4TECH X7 G600 / G700 GAMING KEYBOARD 799 18.5" LG WIDESCREEN MONITOR " L E D " 4,999 A4TECH X7 G800 GAMING KEYBOARD 950 18.5" ACER WIDESCREEN MONITOR LCD 4,550 i-NIX FLEXIBLE MINI KEYBOARD 350 18.5" SAMSUNG WIDESCREEN MONITOR " L E D " 5,250 DELUX MULTIMEDIA KB DLK-7016U USB 399 18.5" SAMSUNG WIDESCREEN MONITOR LD190 7,499 DELUX MULTIMEDIA KB DLK-7018U USB 450 19" ILLUMINA WIDESCREEN MONITOR LCD 4,850 LOGITECH MEDIA COMBO MK19" VIEWSONIC WIDESCREEN MONITOR LCD 5,150 LOGITECH WIRELESS KB + MSE MK260 1,399 20" LG WIDESCREEN MONITOR "LED' E2040S 5,799 LOGITECH G1 GAMING DESKTOP KB + MSE 1,450 20" LG WIDESCREEN MONITOR "LED' E2050 6,299 MICROSOFT WIRED KEYBOARD 200 ( OEM BOX ) 499 20" LG WIDESCREEN MONITOR "LED' E2041 6,450 MICROSOFT WIRED DESKTOP 600 ( KB + MSE ) 799 MICROSOFT WIRELESS DESKTOP 800 (KB + MSE) 6,899 20" LG WIDESCREEN MONITOR "LED' E2060 1,450 21.5" SAMSUNG WIDESCREEN MONITOR LCD P2270 10,700 NETWORKING PRODUCTS Cash Price 21.5" SAMSUNG WIDESCREEN MONITOR LED BX2250 10,950 TP-LINK / EDIMAX 10/100 PCI LAN CARD 250 22" HANNS-G WIDESCREEN MONITOR " LED " 7,350 D-LINK 10/100 PCI LAN CARD 399 23" HANNS-G WIDESCREEN MONITOR " LED " 8,299 EDIMAX 8 PORT SWITCH 599 23" LG WIDESCREEN MONITOR " LED" w/ HDMI 9,850 EDIMAX 16 PORT SWITCH 1,450 23" LG WIDESCREEN MONITOR LCD w/ TV TUNER 11,699 D-LINK / NETGEAR 8 PORT SWITCH 750 25" HANNS-G WIDESCREEN LCD ( DUAL HDMI ) 13,500 D-LINK / NETGEAR 16 PORT SWITCH 1,850 CASING W/ POWER SUPPLY Cash Price D-LINK 24 PORT SWITCH 3,LINKSYS by CISCO 8 PORT SWITCH 2,100 ASPIRE / NEUTRON MINI CASE w/ 500WATTS PSU TECHWILL ATX CASE w/ 600WATTS PSU 1,100 LINKSYS by CISCO 16 PORT SWITCH 3,599 ORIENT / NEUTRON SLIM ATX CASE w/ 500WATTS PSU 1,499 LINKSYS by CISCO 24 PORT SWITCH 4,950 BLACK ICE / F1 " GAMERS CASE " 1,550 LINKSYS by CISCO 8 PORT GIGABIT SWITCH 3,550 OVATION AERO HYPER7 CASE w/ 550W PSU 1,650 LINKSYS by CISCO 16 PORT GIGABIT SWITCH 10,300 ACRYLIC TRANSPARENT ATX CASE 3,950 LINKSYS by CISCO 24 PORT GIGABIT SWITCH 15,500 CROWN PRESTIGE CASE ( NO PSU ) w/ CARD READER 1,550 EDIMAX / TP-LINK BROADBAND ROUTER 999 ANTEC THREE HUNDRED 3,250 D-LINK LOAD BALANCING ROUTER w/ DUAL WAN 4,899 ANTEC SIX HUNDRED 4,650 D-LINK BROADBAND ROUTER ( WIRED ) 1,399 ANTEC SONATA II 5,750 LINKSYS WIRELESS PCI / USB 54G 1,399 AERO COOL QS-200 2,100 I-LINK / COREGA / SURECOM USB WIFI 54G 599 AERO COOL VS9 GAMER'S CASE 2,100 COREGA WIRELESS ROUTER 54G (MIMO) 999 AERO COOL QX-2000 CUBE CASE 2,999 LINKSYS WIRELESS ROUTER 54G 1,599 AERO COOL RS-9 " DEVIL RED EDITION " 3,399 LINKSYS WIRELESS-G ACCESS POINT 2,699 AERO COOL VX-9 PRO LIMITED EDITION 3,999 TP-LINK WIRELESS-G ACCESS POINT 1,650 AERO COOL BX-500 " EVIL BLACK EDITION " 5,350 TP-LINK WIRELESS USB 108G 1,350 AERO COOL XPREDATOR " BLACK EDITION " 6,499 TP-LINK WIRELESS ROUTER 108G 2,150 AERO COOL XPREDATOR " ORANGE EDITION " 6,850 EDIMAX WIRELESS N USB ( 150MBPS ) NLITE 799 MOUSE Cash Price EDIMAX WIRELESS N USB ( 300MBPS ) NMAX 1,499 GENIUS NETSCROLL OPTICAL MOUSE 150 EDIMAX WIRELESS N-MAX ROUTER ( 300MBPS ) 1,650 A4TECH 2X PS/2 OPTICAL WHEEL MOUSE 220 MEGA 3G ROUTER 1,850 A4TECH XL-750BK LASER GAMING MOUSE 1,150 D-LINK WIRELESS N USB ( 300MBPS) 2,850 A4TECH XL-747H LASER GAMING MOUSE 1,250 D-LINK WIRELESS G ROUTER (150MBPS) DIR-600 1,950 LOGITECH OPTICAL MOUSE 311-USB 450 D-LINK WIRELESS N ROUTER (300MBPS) DIR-615 3,199 LOGITECH RETRACTABLE OPTICAL MOUSE MLINKSYS WIFI N HOME ROUTER (150MBPS) WRT120N 2,299 LOGITECH WIRELESS OPTICAL MOUSE MLINKSYS WIRELESS N ROUTER (300MBPS) E1000 3,499 LOGITECH WIRELESS NANO OPTICAL MSE M305 1,550 LINKSYS WIRELESS N ROUTER (300MBPS) WRT160N 4,100 LOGITECH CORDLESS OPTICAL MSE USB V220 1,399 LINKSYS WIRELESS DUAL N ROUTER WRT610N 7,350 MICROSOFT COMPACT OPTICAL MOUSE LINKSYS WIRELESS N ACCESS POINT ( DUAL BAND 4,299 MICROSOFT WIRELESS MOBILE MOUSE RJ 45 JACK 5 UTP CABLE per METER= 6 BOX= MICROSOFT WIRELESS MOBILE MOUSE 3500 1,450 1,199 MICROSOFT ARC TOUCH MOUSE 2,950 UTP CABLE CAT 6 305mtrs / box 2,950

TV TUNERS Cash Price GADMEI PCI TV CARD 750 PIXELVIEW PLAY TV PRO 3 w/ FM 950 GADMEI USB TV BOX 1,450 ITEMS USB BRAVO TV TUNER 1,599 ITEMS PC TO TV CONVERTER 1,650 LEADTEK WINFAST TV 2000XP EXPERT 1,650 MSI TV @NYWHERE PLUS PCI TV TUNER 1,599 MSI VOX II USB ANALOG TV TUNER 2,599 LEADTEK WINFAST PALMTOP TV 2,100 LEADTEK WINFAST TV PRO II 2,750 LEADTEK WINFAST TV PRO 1680 1,850 PIXELVIEW PLAY TV GLOBAL USB 1,250 AVERMEDIA AVERTV VOLAR LITE USB 1,950 AVERMEDIA TV BOX GENIE I 1,950 AVERMEDIA AVERTV DVI BOX7 3,850 MEMORY CARD Cash Price NCP 1GB MINI SD 999 NCP 1GB SD 499 NCP 2GB SD 850 PQI MMC CARD 1GB (SALE) 799 PQI SECURE DIGITAL 512MB (SALE) 590 PQI SECURE DIGITAL 2GB (SALE) 1,100 SONY MEMORY STICK DUO 1GB 450 SONY MEMORY STICK DUO 2GB 699 SONY MEMORY STICK DUO 4GB 1,299 SONY MEMORY STICK DUO 8GB 2,999 SONY M2 1GB 1,150 SONY M2 2GB 1,750 TRANSCEND MINI SD 1GB 999 TRANSCEND RS-MMC 512MB 799 TRANSCEND RS-MMC 1GB 1,399 TRANSCEND SECURE DIGITAL 512MB 590 TRANSCEND SECURE DIGITAL 4GB 1,950 SANDISK MICRO SD 1GB 250 SANDISK MICRO SD 2GB 550 SANDISK MICRO SD 4GB 1,600 USB FLASH DRIVE Cash Price 2GB FLASH DRIVE 299 4GB FLASH DRIVE 350 8GB FLASH DRIVE 599 16GB FLASH DRIVE 1,450 CD/DVD RECORDABLE / DISKETTES Cash Price IMATION / VERBATIM DISKETTE PER BO 130 TDK CDR per piece 6 TDK CDR per spindle ( 100 pcs. ) 600 IMATION DVD-R / DVD+R per piece 15 IMATION DVD+R LIGHTSCRIBE w/ JEWEL 50 HP DVD-R LIGHTSCRIBE 35 HP DVD-R LIGHTSCRIBE / spindle 10pcs. 320 HEADSET / EARPHONES / MIC Cash Price DELKIN MULTIMEDIA HEADSET 250 SONIC GEAR HEADSET w/ MIC HSSONIC GEAR HEADSET w/ MIC HPi-NIX HEADSET w/ MIC NHi-NIX HEADSET w/ MIC NHi-NIX HEADSET w/ MIC NHA4TECH HS100 GAMING HEADSET 499 A4TECH HS780 GAMING HEADSET 650
Cash Price 2,USB 2.5" HDD ENCLOSURE COMBO ( IDE / SATA ) 599 USB 3.0 2.5" HDD ENCLOSURE ( SATA ) 799 USB 3.5" HDD ENCLOSURE ( IDE ) 399 USB 3.5" HDD ENCLOSURE ( SATA ) 599 USB 3.5" HDD ENCLOSURE COMBO ( IDE / SATA ) 750 USB 3.0 3.5" HDD ENCLOSURE ( SATA ) 1,250 USB 5.25" ENCLOSURE ( IDE ) 699 USB 5.25" ENCLOSURE ( SATA ) 899 USB 3.0 2.5" / 3.5" SATA HDD DOCKING STATION 1,399 D-LINK SATA 2-bay Network Accessible Storage 7,599 USB TO IDE ADAPTOR 399 USB TO IDE / SATA ADAPTOR 599 IEEE1394 FIREWIRE PCI CARD 450 SATA RAID CONTROLLER PCI CARD 850 LCD WALL MOUNT KIT 299 LCD WALL MOUNT KIT w/ TILT 450 FIREWIRE CABLE 250 VGA CABLE ( 1.5 METERS ) 150 VGA CABLE ( 5 METERS ) 300 VGA CABLE ( 10 METERS ) 450 DVI CABLE 350 HDMI CABLE 399 COMPUTER TABLE & CHAIR Cash Price GASLIFT CHAIR 700 GASLIFT CHAIR w/ ARMREST 850 COMPUTER TABLE 750 AVR / UPS Cash Price 500WATTS AVR 250 RADIUS 500VA UPS 999 POWERGARDE 600VA UPS 1,450 POWERGARDE 650VA UPS 1,850 ACURA / INTEX 1050VA UPS 2,650 CPU COOLING FAN Cash Price DEEPCOOL ALPHA 200ST ( LGA775 ) 599 DEEPCOOL BETA 200ST ( AM2 / AM2+ ) 599 DEEPCOOL ICEBERG PRO 1,250 DEEPCOOL ICE BLADE PRO 1,799 GIGABYTE X POWER 1,100 GIGABYTE G-POWER LITE 1,350 GIGABYTE G-POWER 2 1,599 GIGABYTE G-POWER PRO 1,750 GIGABYTE VOLAR 2,050 GIGABYTE G-POWER 2 PRO 2,250 GIGABYTE 3D ROCKET II 2,150 GIGABYTE V-POWER ( VGA COOLER ) 2,350 THERMALTAKE SPIN Q VT 2,550 THERMALTAKE FRIO 2,650 OCZ VENDETTA 1,350 OCZ GLADIATOR MAX 1,750 ANTIVIRUS Cash Price KASPERSKY ANTI-VIRUS ( SINGLE USER ) 899 KASPERSKY INTERNET SECURITY ( SINGLE US 999 KASPERSKY ANTI-VIRUS ( 3 USER ) 1,499 KASPERSKY INTERNET SECURITY ( 3 USER ) 2,150

ACCESSORIES LOGITECH WIRELESS GAMEPAD F710 COLTECH USB BLUETOOTH DONGLE USB 2.5" HDD ENCLOSURE ( IDE ) USB 2.5" HDD ENCLOSURE ( SATA )
PORTABLE EXTERNAL HDD 320GB BUFFALO MINISTATION 320GB PQI H551 320GB OVATION / FREECOM XXS 320GB SEAGATE EXPANSION 320GB PQI H560 ( SHOCK PROOF ) 320GB WD PASSPORT 320GB SEAGATE FREE AGENT GO 320GB SEAGATE FREE AGENT GO FLEX 500GB PQI H551 500GB OVATION / ASTONE 500GB FREECOM XXS 500GB WD ELEMENTS 500GB SEAGATE EXPANSION 500GB PQI H560 ( SHOCK PROOF ) 500GB SEAGATE FREE AGENT GO FLEX 640GB WD PASSPORT 1TB WD ELEMENTS 1TB SEAGATE EXPANSION 1TB SEAGATE FREE AGENT GO SEAGATE GO FLEX USB 3.0 CABLE SEAGATE GO FLEX FIREWIRE CABLE SEAGATE GO FLEX eSATA CABLE DESKTOP EXTERNAL HDD 1TB WD " ASTONE " ( USB2 + eSATA ) 1TB WD ELEMENTS DESKTOP 1TB WD MY BOOK ESSENTIAL 1TB WD MY BOOK ELITE 1TB WD MY BOOK STUDIO ( FIREWIRE ) 2TB WD MY BOOK STUDIO ( FIREWIRE ) 1TB SEAGATE EXPANSION 1TB SEAGATE FREE AGENT DESK 1.5TB SEAGATE EXPANSION 1.5TB SEAGATE FREE AGENT DESK 2TB WD ELEMENTS DESKTOP 2TB SEAGATE EXPANSION 2TB SEAGATE FREE AGENT DESK WEBCAM DELKIN USB WEBCAM ( 12MP ) MICROSOFT LIFECAM VX-1000 A4TECH VIEWCAM PK-635M G-CUBE LUX LEOPARD / TRAVEL TINI G-CUBE NEW COMPACT CAM LOGITECH WEBCAM C160 DELUX DLV-B705 DELUX DLV-B33 ( 1.3MP ) SOFTWARE WINDOWS VISTA STARTER WINDOWS 7 STARTER WINDOWS 7 HOME BASIC WINDOWS 7 HOME PREMIUM WINDOWS 7 PROFESSIONAL ( 32bit ) WINDOWS 7 PROFESSIONAL ( 64bit ) WINDOWS 7 ULTIMATE OFFICE HOME & STUDENT 2007 OEM OFFICE HOME & STUDENT 2010 FPP OFFICE HOME & BUSINESS 2010 FPP MS OFFICE PROFESSIONAL 2010
Cash Price 1,788 1,850 1,850 2,100 2,350 2,150 2,150 2,399 2,350 2,350 2,350 2,350 2,550 2,799 3,299 4,150 4,750 5,850 6,350 4,250 1,950 1,599 Cash Price 3,699 3,150 4,550 5,350 6,350 8,650 3,499 3,950 4,899 5,350 5,350 5,650 6,450 Cash Price 1,Cash Price 999 1,850 3,899 4,899 6,650 6,850 8,950 3,000 3,850 8,650 21,850