MSI NOTEBOOK

Recovery HotKey User Manual

English version

P.1 P.7
Chinese Traditional version German version French version P.13 P.19
Euro Portuguese version Italian version Spanish version P.31

P.37 P.44

Chinese Simple version

Content

Recovery User Manual
Introduce to Recovery... 3 Hotkey Recovery from Hard Drive... 4

Introduce to Recovery

Why using System Recovery
When you want to restore the system back to the initial status of original manufacturers default settings. The operating system in use has errors or is affected by virus and therefore cant work normally. Using System Recovery allows you to restore your computer back to the initial status of original manufacturers default settings.

System Recovery Methods

Hotkey Recovery from Hard Drive or Recovery to Factory Default. DVD Fail-safe Recovery.
Precautions for using System Recovery
When the Hotkey Recovery from Hard Drive or the Factory Default Recovery [Recovery to Factory default] is selected, the data and settings in your system partition will be reset and restored to factory default settings. (This only applies to the data of the system partition, C:. The data in the non-system partition will not be changed.) When the DVD Fail-safe Recovery [Fail-safe Recovery] is selected, all data in the entire hard drive will be destroyed and restored to factory default settings. (The data in all partitions will be destroyed.) Under the above operation, the Hotkey Recovery from Hard Drive cannot be used any more. Please use the Hotkey Recovery from Hard Drive first to perform system recovery. If your hard drive and system encountered non-recoverable problems, then please try to perform the DVD Fail-safe Recovery [Fail-safe Recovery] to restore your entire system to Fail-safe settings. Before using System Recovery, please backup important data on your system drive to other storage devices. Please note that if you use other disk partitioning software, unauthorized disk partitioning may result in failure of the original manufacturers default recovery function.
Hotkey Recovery from Hard Drive
When you boot the system, press and hold the hot key F3 to enter the System Recover screen. [Note 1]
When the screen displays the inquiry window of Window startup, please press [Enter] to access System Recovery.
Please select [MSI Recovery Manager] to start System Recovery.
Then the inquiry window will show up. Press [OK] if you are sure to continue System Recovery, or press [Cance l] to stop System Recovery at any time.
System Recovery in process.
When the Finish window appears, the system is recovered. Please press [OK] to reboot the system and access Vista operating system as usual.
[Note 1] You can also use the hot key F8. After entering the [Advanced Boot Options] menu, please select [Repair Your Computer] to access System Recovery screen.
[Recovery to Factory default] [Fail-safe Recovery]
[Recovery to Factory default]

[Fail-safe Recovery]

(Recovery)

Windows

[Enter]

[MSI Recovery Manager]

[Cancel]

[Advanced Boot Options]

[Repair Your Computer]