User Manual

Bluetooth GPS Receiver

English
2006 Brunswick New Technologies Asia Pte Limited. Navman is a registered trademark of Brunswick New Technologies Asia Pte Limited and is used under licence by Navman New Zealand. Navman is part of the Brunswick Corporation, headquarters Chicago, IL. All rights reserved. The software contains proprietary information of Navman; it is provided under a licence agreement containing restrictions on use and disclosure and is also protected by copyright law. Reverse engineering of the software is prohibited. No part of this publication may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording or otherwise, without the prior written permission of Navman. Back-On-Track, Drive-Away, NavPix, Smart and Turn-by-Turn are either registered trademarks or trademarks of Brunswick New Technologies Asia Pte Limited and are used under licence by Navman New Zealand. All rights reserved. The Bluetooth word mark and logos are owned by the Bluetooth SIG, Inc. and any use of such marks by Navman New Zealand is under license. Microsoft Windows 2000 and XP SP1, Microsoft Internet Explorer and ActiveSync are either registered trademarks or trademarks of Microsoft Corporation in the United States and/or other countries. All rights reserved. Adobe and Adobe Reader are either registered trademarks or trademarks of Adobe Systems Incorporated in the United States and/or other countries. All rights reserved. All other trademarks and registrations are the property of their respective owners. Published in New Zealand.

Disclaimer

Due to continued product development this information may change without notice. Navman does not warrant that this document is error-free. The screenshots and other presentations shown in this User Manual may differ from the actual screens and presentations generated by the actual product. All such differences are minor and the actual product will deliver the described functionality as presented in this User Manual in all material respects.

Compliance

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
B10 Bluetooth GPS Receiver | Important safety information
Important safety information
PLEASE READ CAREFULLY BEFORE INSTALLING PRODUCT IN VEHICLE
This is the safety alert symbol. It is used to alert you to potential personal injury hazards. Obey all safety messages that follow this symbol to avoid possible injury or death. WARNING indicates a potentially hazardous situation which, if not avoided, could result in death or serious injury. CAUTION indicates a potentially hazardous situation which, if not avoided, may result in minor or moderate injury. CAUTION used without the safety alert symbol indicates a potentially hazardous situation which, if not avoided, may result in property damage.
Removing original equipment, adding accessories or modifying your vehicle could affect the vehicles safety or make it illegal to operate in some jurisdictions. Follow all product instructions and all instructions in your vehicle owners manual regarding accessories or modifications. Consult your countrys and/or states laws regarding operation of a vehicle with any accessories or modifications.

It is your sole responsibility to place, secure and use the B10 in a manner that will not cause accidents, personal injury or property damage. Always observe safe driving practices. Mount the B10 in a position that is secure and does not obstruct the drivers view. Do not mount the B10 in a way that may interfere with the safe operation of the vehicle, the deployment of air bags or other safety equipment. Do not operate the B10 while driving. Before you use your B10 for the first time, familiarize yourself with your device and its operation.
Do not handle the B10 while it is hot. Let the product cool, out of direct sunlight.
Do not expose the B10 to direct sunlight in an unattended vehicle for prolonged periods. Overheating may damage the unit. To discourage theft, do not leave the B10, mounting bracket or any cables in plain view in an unattended vehicle. Failure to adhere to these warnings and cautions may lead to death, serious injury or property damage. Navman disclaims all liability for installation or use of the B10 that causes or contributes to death, injury or property damage or that violates any law.
B10 Bluetooth GPS Receiver | Contents

Contents

Important safety information....3 Introduction.....5 Box contents.....6 Typographical conventions....7 Getting to know your B10....8 Front Components....8 Top Components....9 Side Components....9 GPS and GPS Signals....10 How do I get started?.....11 Battery.....12 How do I charge the battery?....13 How do I position the B10 receiver in a vehicle?....15 How do I connect the B10 receiver to my PDA or laptop?...16 How does my B10 get a GPS Fix?...16 Specifications.....17 Support information....18
B10 Bluetooth GPS Receiver | Introduction

Introduction

Whether you travel in your own country, or overseas, the B10 receiver will provide you with a Global Positioning System (GPS) based location accurate to within 5m (15ft) for 95% of the time. The B10 receiver is a dual-function GPS receiver, which can transmit satellite information to a PDA or laptop with Bluetooth interfaces. The B10 receiver contains: a GPS antenna to receive signals from the GPS satellites an internal microcomputer to calculate the position of the receiver on Earth and update position data every second a Bluetooth link to send the GPS position to your PDA within a radius of less than 10m (33ft) a built-in rechargeable battery. The B10 receiver can be used anywhere; for example, in your pocket or your vehicle glovebox, although it is preferred that the receiver has a clear view of the sky and can receive GPS signals easily.

In this section

Box contents....6 Typographical conventions....7 Getting to know your B10....8 GPS and GPS Signals....10

Box contents

B10 receiver
12V In-vehicle power adaptor

USB cable

Global Support Information

Hardware Warranty Agreement

Registration card

WEEE Compliance leaflet
The following documentation is available on our website: User Manual GPS Frequently Asked Questions guide. To visit our website, see: http://www.navman.com.
Typographical conventions
It is important to understand the typographical conventions used in this manual.

Formatting

The following kinds of formatting in the text identify special information:

Convention

Bold Italics

Type of Information

Components or items of special importance, including buttons, headings and options. Indicates the name of a reference document.
The following icons are used throughout this manual:

Description

Note Tip Warning

Getting to know your B10

It is recommended that you familiarize yourself with the basic operations of your B10 receiver:

Front Components

Component
An orange light indicates your current GPS status. Off: The B10 receiver power is off. Single flash every 1 second: The B10 receiver searching for satellites. Single flash every 3 seconds: The B10 receiver has a fixed GPS position. A blue light indicates your Bluetooth status. Off: The B10 receiver power is off. Single flash every 1 second: The B10 receiver searching for a Bluetooth device. Single flash every 3 seconds: Data is being transferred. Indicates your battery status. Off: Either the External Power Adaptor is not plugged in, or the adaptor is plugged in but the internal battery is fully charged. Green: Battery is charging. Red: Battery power is low, and needs charging.

Top Components

To turn on: Slide the To turn off: Slide the button towards ON. button away from ON.

Side Components

External Power Adaptor/USB socket Lanyard connection
If the vehicle power adapter is plugged in, the B10 receiver will use the external power supply instead of the internal batteries. A slot in which to connect a lanyard (not supplied).

GPS and GPS Signals

The B10 receiver will send the GPS position information to your PDA or laptop computer which may then be used by your third-party software to plot your position on a map and direct you to your destination. The Global Positioning System (GPS) is available at any time, free of charge, and is accurate to within 5m (15ft). GPS navigation is made possible by a network of satellites that orbit the Earth at around 20,200km (12,552mi). Each satellite transmits a range of signals which are utilized by GPS receivers, such as your B10, to determine an exact location. Although a GPS receiver can detect signals from up to 12 satellites at any time, only four signals are required to provide a position or "GPS fix" (latitude and longitude), for vehicle navigation systems. To guarantee the optimum GPS signal strength, ensure your B10 is outdoors, or in a vehicle outdoors and has an unobstructed view of the sky. Your B10 can operate in all weather types except snowfall.

For more GPS information, see the GPS Navigation - Frequently Asked Questions guide, which is available on our website. To visit our website, see: http://www.navman.com.
B10 Bluetooth GPS Receiver | How do I get started?

How do I get started?

To get started for the first time, complete the following steps:

Action

Install the battery. Switch on the power. Create a Bluetooth link between the B10 receiver and your PDA or laptop computer.
Battery.....12 How do I position the B10 receiver in a vehicle?...15 How do I connect the B10 receiver to my PDA or laptop?..16 How does my B10 get a GPS Fix?...16

Battery

The B10 receiver has an internal, rechargeable battery. For minimum time to obtain a GPS fix, ensure that the battery is always in the B10 receiver. The life of the battery is approximately 10 hours.
How do I charge the battery?
There are two ways of charging the battery. These are listed below.

By Vehicle Power Adaptor

You can use the vehicle power adapter to power the B10 receiver when in a vehicle. If the vehicle power adapter is plugged in, the receiver will use the external power supply and charge the internal battery. 1. 2. 3. Plug the connecting end of the vehicle power adapter in your 12V In-vehicle power adaptor socket. Plug the USB (larger) end of the USB cable in to the USB socket on the vehicle power adapter. Plug the smaller end of the USB cable in to the external power adapter socket on the B10 receiver.

By USB cable

To charge the battery via the USB cable: Plug the large end of the USB cable directly into a USB port on your computer (not a USB hub); plug the small end into the side of the B10 receiver. The battery status light on the front of your B10 receiver turns on.
Where possible, plug the USB cable into a USB port at the back of your computer.
When the battery is charging, the battery status light is green. When the battery is fully charged, the light is off. If you dont see the status light even momentarily, try another USB port on your computer.
Rechargeable batteries have a limited number of charge cycles. Battery life and number of charge cycles vary by use and settings.
How do I position the B10 receiver in a vehicle?
The B10 receiver and your PDA or laptop computer are mounted separately in your vehicle. Use the following guides to choose a suitable position for the B10 receiver: The receiver should be in a position where it has a good view of the sky and horizon. The receiver must not obstruct your view, or interfere with the operation of the vehicle or the vehicle safety equipment. The receiver must be accessible so that you can operate the Avoid locations subjected to excessive shock or vibration. The receiver must be within the Bluetooth range (approx 10m/33ft) of your PDA or laptop computer. The receiver is not waterproof mount it where it will not get wet (including condensation). button. Avoid placing the receiver near sources of electrical interference or noise.

How do I connect the B10 receiver to my PDA or laptop?
To establish a Bluetooth connection between your PDA or laptop computer and the B10 receiver, complete the following steps: 1. Turn on the B10 receiver. Slide the button to ON. The light will show as blue, then start flashing to indicate that it is not connected to another Bluetooth device. 2. 3. Turn on your PDA/laptop. Turn on Bluetooth on your PDA/laptop and connect to the B10 receiver: Ensure that the light on the B10 receiver is still flashing.
Turn on Bluetooth on your PDA/laptop and establish a connection with the B10 receiver by following the documentation supplied with your PDA/laptop or Bluetooth card. If you are prompted for a Passkey or Device PIN, use the following Passkey / Device PIN:

Device Name

NAVMAN GPS TWO

Passkey / Device PIN

When a connection has been established between your PDA/laptop and B10 receiver, the light on the B10 receiver will change to flash once every 3 seconds. 4. Pocket PC Only Determine the Bluetooth COM Port. Identify the outbound COM port used to create a serial port connection between your PDA and the B10 receiver by following the documentation supplied with your PDA or Bluetooth card. Specify the outbound COM port in your third-party software to receive GPS data from the B10 receiver. You are now ready to obtain a GPS fix.
How does my B10 get a GPS Fix?
The term "GPS fix" is used to describe when your B10 receiver has enough information from four or more GPS satellites to calculate your position. You can monitor the strength of the GPS signal using your third-party software. See your third-party software User Manual for more information. When you turn on your B10 receiver, it may take several minutes to get the first GPS fix. You can minimize the amount of time this takes by: Positioning the B10 receiver according to the guidelines. For more information, see "How do I position the B10 receiver in a vehicle?" on page 15. Remaining stationary until the B10 receiver has a GPS fix.
B10 Bluetooth GPS Receiver | Specifications

Specifications

Case UV stable plastic Size 17 mm Weight 56 g Batteries Main Power: Built-in rechargeable Lithium-ion for system power. Backup Power: Rechargeable coin-cell battery for memory & RTC backup Operating Temperature -10 to +60C (14 to 140F) uncharging 0 to +45C charging Interface Bluetooth class 2 Version 1.1 SPP (Serial Port Profile) Within 10 m (33 ft) range with no obstruction In/Out Port. GPS signal (Out)/Command(In) with CMOS/TTL Level. Output Format. NMEA0183 V2.2 GPGGA (1time/1 sec), GPGSA (1 time/5 sec.), GPGSV (1time /5 sec.), GPRMC (1time /1 sec.), GPVTG (1 time/1 sec), (GLL, or SiRF binary format for optional). Datum: WGS84 GPS Antenna 25 x 25 x 2 mm (1 x 1 x 0.2 in) ceramic patch GPS Receiver SiRF Star III low power chipset 20 channel parallel, automatic selection 1575.42MHZ frequency L1, C/A code receiver Time to First GPS Fix Hot Start - 1 second typical Warm Start - 38 seconds typical Cold Start - 42 seconds typical
B10 Bluetooth GPS Receiver | Support information

Support information

Support for Australia
Navman Australia Pty Ltd PO Box 479 Gladesville, NSW 2111 Australia

Support for Europe

Navman Europe Ltd 4G Gatwick House Peeks Brook Lane, Horley Surrey RH6 9ST United Kingdom Support: http://support.navman.com Website: http://www.navman.com
Support: http://support.navman.com Website: http://www.navman.com

Support for New Zealand

Navman New Zealand PO Box 68-155 Newton Auckland New Zealand
Support for US and Canada
Navman USA Inc 5275 Capital Boulevard Raleigh, NC 27616-2925 United States of America Phone: 866-9-NAVMAN Support: http://support.navman.com Website: http://www.navman.com

MN000700A-G

Key features

MOBILE TRAVEL ASSIST

NavPix picture = address Find Flights check worldwide ights and status Navman Live Trafc real time premium trafc information Downloadable POI inclusive description Plan a Trip even without GPS receiver
Get more mobile with your mobile.
Introducing Navmans award winning Mobile Travel Assist. Complete with next generation GPS technology, NavPix photo navigation, comprehensive ight information and the latest city guides. Based on the Symbian smartphone operating system, Mobile Travel Assist offers all the services youd expect from your personal Travel Assistant and more.

City guide

Automatic Bluetooth connection to GPS Drive Away ready to use door-to-door navigation Navigate using Outlook contacts Turn-by-Turn voice guidance in 8 languages Back-on-Track automatic route recalculation
New Zealand Navman NZ Kawana Street Northcote PO Box 68 155, Newton Auckland New Zealand
Europe Navman Europe 4G Gatwick House Peeks Brook Lane Horley, Surrey RH6 9ST United Kingdom
Americas Navman USA 5275 Capital Blvd. Raleigh NC 27616-2925 USA
Australasia Navman Australia Suite Victoria Road PO Box 479 Gladesville NSW 2111 Australia
2006 Brunswick New Technologies Asia Pte Limited. Navman is a registered trademark of Brunswick New Technologies Asia Pte Limited and is used under licence by Navman New Zealand. Navman is part of the Brunswick Group headquarters Chicago, IL. All rights reserved. Back-On-Track, Drive-Away, NavPix, SmartS and Turn-by-Turn are either trademarks or registered trademarks of Brunswick New Technologies Asia Pte Limited and are used under licence by Navman New Zealand.
Data source: 2005 Navteq All other trademarks and registrations are the property of their respective owners. Printed in UK

www.navman.com/mobile

Automatic Zoom
NavPix Picture yourself there.
Two Bluetooth GPS options
To use Mobile Travel Assist with your smartphone, youll need a GPS receiver. Navman offers you two options. The B10 is a light, battery-powered pocket-sized receiver that transmits a GPS signal to your mobile from anywhere in your vehicle, handbag or pocket whilst youre out and about. The small, discreet B20 is designed for in-car use only, sitting neatly in and powered by the cigarette lighter. Both the B10 and B20 feature the latest SiRFstar III GPS technology.
Mobile navigation just got easier
Developed over 20 years, Navmans renowned GPS navigation system has arrived for the mobile smartphone. With NavPix photo navigation, 3D maps, turn-by-turn voice guidance and Navmans Back-on-Track function, Mobile Travel Assist sets the new standard for mobile car navigation. The addition of real-time trafc information, free for the rst year, means you can navigate around trafc hotspots before getting caught up in them, taking the stress out of driving and making your journey easier.

More than navigation

Navman Mobile Travel Assist connects you to navigation and more. The OAG ight planner, subscription free for the rst year, gives you updated airline ight schedules at your ngertips. And if you like to explore, youll love using the Wcities feature. Wcities is one of the webs favourite travel sites, with multi-lingual city guides and the latest information on the best attractions, dining, nightlife, hotels and special events. Combined with NavPix, Wcities means you can explore all major cities in Europe like never before.
Introducing the worlds rst image-based navigation system for mobile phones. Available only with Navmans Mobile Travel Assist, NavPix simplies navigation by using photos to locate your destination. You can use NavPix as an alternative to postcode or address searching. Simply select a photo from the folder on your mobile, and Navman navigates you there.
Create your own NavPix using the built-in camera on your mobile, and share them with other smartphone users with MMS picture messaging. There are also thousands of NavPix photos to download free from the NavPix website including an exclusive Lonely Planet selection featuring top hotels and restaurants, important landmarks and famous buildings in London, Paris, Milan and Madrid and most other great cities throughout Europe.

Plug and Play to cigarette lighter
Rechargeable Battery with approx. 10 hours battery life
Search for the latest live ight information across all major airports around Europe.
Select a ight for detailed information such as terminal and departure/arrival status.
Wherever you are in Europe, Wcities can nd you a nearby hotel, restaurant, cinema and more.
Wcities acts like a pocket guide. Essential travel information is now at your ngertips!