DATA SHEET
NPN SILICON POWER TRANSISTOR

2SD882

DESCRIPTION
The 2SD882 is NPN silicon transistor suited for the output stage of 3 watts audio amplifier, voltage regulator, DC-DC converter and relay driver.
PACKAGE DRAWING (Unit: mm)

8.5 MAX. 3.2 0.2

3.8 0.2

2.8 MAX.

FEATURES
Low saturation voltage VCE(sat) = 0.5 V MAX. (IC = 2 A, IB = 0.2 A) Excellent hFE linearity and high hFE hFE = 60 to 400 (VCE = 2 V, IC = 1 A) Less cramping space required due to small and thin package and reducing the trouble for attachment to a radiator. No insulator bushing required.
12.0 MAX. 2.5 0.2 13.0 MIN.

ABSOLUTE MAXIMUM RATINGS

Maximum Temperature Storage Temperature 55 to +150C Junction Temperature 150C Maximum Maximum Power Dissipations 1.0 W Total Power Dissipation (TA = 25C) 10 W Total Power Dissipation (TC = 25C) Maximum Voltages and Currents (TA = 25C) Collector to Base Voltage 40 V VCBO VCEO Collector to Emitter Voltage 30 V Emitter to Base Voltage 5.0 V VEBO Collector Current (DC) 3.0 A IC(DC) IC(pulse)Note Collector Current (pulse) 7.0 A Note Pulse Test PW 350 s, Duty Cycle 2%

12 TYP.

0.55 +0.08 0.05

0.8 +0.08 0.05

1.2 TYP. 2.3 TYP.

2.3 TYP.

1: Emitter 2: Collector: connected to mounting plane 3: Base
ELECTRICAL CHARACTERISTICS (TA = 25C)
CHARACTERISTIC DC Current Gain DC Current Gain Gain Bandwidth Product Output Capacitance Collector Cutoff Current Emitter Cutoff Current Collector Saturation Voltage Base Saturation Voltage SYMBOL hFE1 hFE2 fT Cob ICBO IEBO VCE(sat) VBE(sat) TEST CONDITIONS VCE = 2.0 V, IC = 20 mA VCE = 2.0 V, IC = 1.0 A VCE = 5.0 V, IC = 0.1 A VCB = 10 V, IE = 0, f = 1.0 MHz VCB = 30 V, IE = 0 A VEB = 3.0 V, IC = 0 A IC = 2.0 A, IB = 0.2 A IC = 2.0 A, IB = 0.2 A

Note Note Note Note

MIN. 30 60

TYP. 90 45

MAX. 400

MHz pF 1.0 1.0

0.3 1.0

0.5 2.0

Note Pulse Test: PW 350 s, Duty Cycle 2% CLASSIFICATION OF hFE
Rank Range R 60 to 120 Q 100 to 200 P 160 to 320 E 200 to 400
Remark Test Conditions: VCE = 2.0 V, IC = 1.0 A
The information in this document is subject to change without notice. Before using this document, please confirm that this is the latest version.
Not all products and/or types are available in every country. Please check with an NEC Electronics sales representative for availability and additional information.
Document No. D17116EJ2V0DS00 (2nd edition) (Previous No. TC-3564) Date Published March 2004 N CP(K) Printed in Japan

The mark

shows major revised points.
TYPICAL CHARACTERISTICS (TA = 25C)

VCE=10V IC=1.0A

IC(pulse)

IC(DC)MAX.

IC=10AIB VBE(sat)

VCE=5.0V

IE=0A(Cob) IC=0A(Cib)

Cib Cob

VBE(sat) VCE(sat)

VCB VEB

Data Sheet D17116EJ2V0DS

TC=25C

The information in this document is current as of March, 2004. The information is subject to change without notice. For actual design-in, refer to the latest publications of NEC Electronics data sheets or data books, etc., for the most up-to-date specifications of NEC Electronics products. Not all products and/or types are available in every country. Please check with an NEC Electronics sales representative for availability and additional information. No part of this document may be copied or reproduced in any form or by any means without the prior written consent of NEC Electronics. NEC Electronics assumes no responsibility for any errors that may appear in this document. NEC Electronics does not assume any liability for infringement of patents, copyrights or other intellectual property rights of third parties by or arising from the use of NEC Electronics products listed in this document or any other liability arising from the use of such products. No license, express, implied or otherwise, is granted under any patents, copyrights or other intellectual property rights of NEC Electronics or others. Descriptions of circuits, software and other related information in this document are provided for illustrative purposes in semiconductor product operation and application examples. The incorporation of these circuits, software and information in the design of a customer's equipment shall be done under the full responsibility of the customer. NEC Electronics assumes no responsibility for any losses incurred by customers or third parties arising from the use of these circuits, software and information. While NEC Electronics endeavors to enhance the quality, reliability and safety of NEC Electronics products, customers agree and acknowledge that the possibility of defects thereof cannot be eliminated entirely. To minimize risks of damage to property or injury (including death) to persons arising from defects in NEC Electronics products, customers must incorporate sufficient safety measures in their design, such as redundancy, fire-containment and anti-failure features. NEC Electronics products are classified into the following three quality grades: "Standard", "Special" and "Specific". The "Specific" quality grade applies only to NEC Electronics products developed based on a customerdesignated "quality assurance program" for a specific application. The recommended applications of an NEC Electronics product depend on its quality grade, as indicated below. Customers must check the quality grade of each NEC Electronics product before using it in a particular application. "Standard": Computers, office equipment, communications equipment, test and measurement equipment, audio and visual equipment, home electronic appliances, machine tools, personal electronic equipment and industrial robots. "Special": Transportation equipment (automobiles, trains, ships, etc.), traffic control systems, anti-disaster systems, anti-crime systems, safety equipment and medical equipment (not specifically designed for life support). "Specific": Aircraft, aerospace equipment, submersible repeaters, nuclear reactor control systems, life support systems and medical equipment for life support, etc. The quality grade of NEC Electronics products is "Standard" unless otherwise expressly specified in NEC Electronics data sheets or data books, etc. If customers wish to use NEC Electronics products in applications not intended by NEC Electronics, they must contact an NEC Electronics sales representative in advance to determine NEC Electronics' willingness to support a given application. (Note) (1) "NEC Electronics" as used in this statement means NEC Electronics Corporation and also includes its majority-owned subsidiaries. (2) "NEC Electronics products" means any product developed or manufactured by or for NEC Electronics (as defined above).

.TW 00Y W.1 Y.COM W WW NPNW.SILICONT POWER TRANSISTOR 100 M.CO.TW W Y W.TW M.100 OM WW 00Y.CO.TW W Y.C W M.1 M.T.100 WW 00Y.CO.TW WW 00Y.CO.TW W W OM W.1 OM W.1 WW.100Y.C M.TW W WW.100Y.C M.TW O W M.T O W.CO.TW WW.100Y.C M.TW NPN WW.100Y.C SILICON POWER TRANSISTOR.TW 0Y O W M.10 OM W WW.100Y.C M.TW WW 00Y.CO.TW WW.100Y.C M.TW O W M.1 O W WW.100Y.C M.TW WW 00Y.CO.TW WW.100Y.C M.TW W O W O W OM W.1 DESCRIPTION WW.100Y.C M.TW PACKAGE DRAWING (Unit: mm) WW.100Y.C M.TW WW.100Y.C M.TW O The 2SD882 is NPN siliconWW transistor suited for the output stage of 3 W W.CO.TW CO WW.100Y.C M.TW W 00Y WW.100Y.watts M.TW audio amplifier, voltage regulator, DC-DC converter and relay O W 8.5 MAX. OM W.1 O W driver. WW.100Y.C M.TW WW.100Y.C M.TW WW.100Y.C M.TW 2.8 MAX. W 3.2 0.2O O W WW.100Y.C M.TW WW 00Y.CO.TW WW.100Y.C M.TW FEATURES W O W W.1 Low OM W WW 0.CO.TW.C saturation voltage WW.100Y.C M.TW WW.100YCE(sat) =M.TV MAX. (IC = W A, IB =.0.20Y 1 A) M 2 O W W W V O 0.5 linearity.CO.TW WW.100Y.C M.TW Excellent hFE WW WW.100Y.C M.TW and high hFE.100Y M O W = O WW W hFEY 60 to 400 (VCE = 2 V, IC = 1 A) W.CO Y.C WW.100 and 0 cramping space WW.1Less.C M.TW required due to small Y thinM.TW and W W.100 M.T 0 package W.CO.TW W W reducing O trouble for attachment to a radiator.CO W 00Y WW.100Y.TW WW.100Y.C the M.TW W.1 Y.COM W OM W No insulator bushing required. O W WW.100.T WW.100Y.C M.TW WW.100Y.C M.TW OM O W 12 TYP. WW W.C ABSOLUTE O Y.C W C MAXIMUM RATINGS Y W.TW W 00 W.TW WW.100Y.100 W.1 Y.COM W M.T Maximum Temperature OM W O W WW.100 WW.155Y.C M.TW 00 to +150C WWStorage 0Y.C M.TW M.T.10 Temperature W.CO.TW O WW 00Y0.55 W Temperature W CO. Junction Y.C W WW 150C Maximum.TW 00Y 0 WW.1Power Dissipations M.1.T Maximum 0 W.1 Y.COM W OM WW 00Y.CO.TW W W.C W W 0 1.0 W M.T Total Power Y Dissipation.TW 25C) W (TA = 0 W OM W.1.100 W.1 OM = 10 O Total W WW.100Y.C M.TW W Power Dissipation (TC W25C) Y.C Currents (TA = 25C) W.100Y.CW M.TW0.8 W W Maximum Voltages and M.T O 1.2 TYP. W.100 O WW 00Y.CO.T2.3 TYP. W WW TYP.00Y.C M.TW WW Collector to BaseW 40 V VCBO 2.3.1 0Y.C M.T Voltage W W O 10 W W.COM W O VCEO WW. Collector to Emitter Voltage WW.100Y.C M.TW 0YV WW.105.0.V.T 0Y.C Base Voltage W TW VEBO.10 to OM. OM W WW 00Y.CO.TW WEmitterY Current (DC) 1: IC(DC) W Collector.C W WW.13.0 Y.C M.TW Emitter W 00 A W 00 OM W.1 M.T 2: connected mounting IC(pulse)Note W.1 Collector Current (pulse) A WW 7.0 0Y.CO.TW Collector: WW to 00Y.C plane.TW CO W Y. 350 s,.TW Cycle 2% W 3: Base 0 Note W Pulse Test00 OM W.1 M Duty.1 PW OM W.1 WW.100Y.C M.TW WW 00Y.CO.TW WW.100Y.C M.TW W O ELECTRICAL W.1 CHARACTERISTICS (TA = 25C) W W OM. O WW.100Y.C M.TW WWCONDITIONSC M.TWMIN. 00Y WW.100Y.C SYMBOLW.T CHARACTERISTIC TEST W.1 TYP. MAX. UNIT O W OM W.CO.TW W WW.100Y.C M.TW DC Current Gain V C = WW.100Y.C hFE1.TW CE = 2.0 V, IW 20 mANote00Y O W OM 60 W.1 Note OM VCE DC Current Gain WW = 1.WW400 00Y.C.TW Y.C hFE2.TW = 2.0 V, IC WWA.100Y.C M.TW W 00 W.1 MHz.COM W O Gain Bandwidth Product.1 fT M VCE = 5.0 V, IC = 0.1 A W 90 O W WW.100Y W WW.10.C M.TW WW.100Y.C ob M.TCB = 10 V, IE = 0, f = 1.0 MHz 0Y M.T Output Capacitance C V 45 pF O O VCB = 30 V, IE = 0 A WW WW 00Y.CO.TW W.C W Y W1.0.1 A Collector Cutoff Current IC W WW.100Y.CBO M.TW M.T.100 OM W CO Emitter Cutoff Current WW IEBO O VEB = 3.0 V, IC = 0 A WW 1.0 W.C Y. WW.1A 0Y.C M.TW 0 W.T 0Y W TW Note.100 Collector Saturation Voltage.10 VCE(sat) OM. 2.0 A, IB = 0.2 A IC = 0.3 0.5 OM WW V 00Y.CO.TW W W 1.0.C IC =.2.0W IB = 0.2 ANote WW 00Y.C W W Base Saturation VoltageW VBE(sat) 2.0 W T A,. 00Y M.T.1 OM WV1 W.1 Duty.COM 2%W WW 00Y.CO.TW Note Pulse Test: PW 350 s, 0Y Cycle WW.100Y.C M.TW W W W.T 0 M.1 O W W.1 Y.COM W WW 00Y.CO.TW WW.100Y.C M.TW CLASSIFICATION OFWFE hW W 0.T 0 O W OM W.1 OM P W.1 Q Rank R E WW.100Y.C WW.100Y.C M.TW WW.100Y.C M.TW W O Range 60 to 200 to 400 W WW WW to0200.CO 160 to 320 WW.100Y.C M.TW 0IY= 1.0 A.TW W Remark Test Conditions: VCE = W.1 C 2.0 V, O W OM WW.100Y.C M.TW WW.100Y.C M.TW W The information in this document is subject to change without notice. WW using this document, please Before.CO.CO.TW W confirm that this isWW the latest version. 00Y 1with an NEC Electronics 00Y Not all products and/or types1 W. O in W. are availableM every country. Please check sales representative for availability and additional information. WW WW.100Y.C M.TW WW 00Y.CO.TW Document No. D17116EJ2V0DS00 (2nd edition) W M The.1 mark shows major revised points. (Previous No. TC-3564) WW 00Y.CO W Date Published March 2004 N CP(K) W.1 Printed in Japan c 2004 WW

DATA SHEETM.TW.CO

2SD882

3.8 0.2

2.5 0.2

13.0 MIN.