Reviews & Opinions
Independent and trusted. Read before buy NEC Dterm IP 8D!

NEC Dterm IP 8D

Manual

Preview of first few manual pages (at low quality). Check before download. Click to enlarge.
Manual - 1 page 

Download (English)
NEC Dterm IP 8D - Technical Specifications, size: 136 KB
Instruction: After click Download and complete offer, you will get access to list of direct links to websites where you can download this manual.

About

NEC Dterm IP 8DAbout NEC Dterm IP 8D
Here you can find all about NEC Dterm IP 8D like manual and other informations. For example: review.

NEC Dterm IP 8D manual (user guide) is ready to download for free.

On the bottom of page users can write a review. If you own a NEC Dterm IP 8D please write about it to help other people.

 

[ Report abuse or wrong photo | Share your NEC Dterm IP 8D photo ]

User reviews and opinions

<== Click here to post a new opinion, comment, review, etc.

Comments to date: 13. Page 1 of 1. Average Rating:
gcowsar 10:40pm on Monday, October 4th, 2010 
Snug comfortable fit with good bass sound. Noise cancellation qualities block a telephone ring as well as other moderate sounds. I use these to listen to multimedia on my laptop. Small size and portability are important, and on these points, these phones are quite good.
cuma 9:48am on Friday, September 10th, 2010 
Newegg Rocks!! Great for the price, working out and running they stay in my ears. I sweat a lot and they continue to work well. I purchased these since my old headphones (buds) were awful when I went running with how often they slipped out of my ear.
garthh 6:04pm on Wednesday, September 8th, 2010 
I have bought or tried about 6-8 different brands and models of headphones. But I like these the best. Light weight, open, clear sound. Portable.
Zacca 7:21am on Wednesday, August 18th, 2010 
Unbalanced Response Sennheiser brands this item with the phrase "Bass-Driven Sound. Not sure if it was just my pair.... ... but for some reason my cord for the Left ear and cord for the Right ear are totally different lengths! Great midlevel headphones Bought these bad boys as a replacement for the sorry excuse for headphones Apple gives you when you purchase a listening dev...
creperum 6:09pm on Sunday, July 18th, 2010 
If you are looking for open-air headphones, you need look no further. They are very resonably priced, considering how nice they sound.
Fonzemc 5:49am on Wednesday, June 30th, 2010 
A superior listening experience. Comfortable","Compact","Durable","Good Bass","Good Value","Great Sound","Lightweight","Stylish
ryszardkl 5:05pm on Thursday, June 10th, 2010 
Lightweight, good sound. For the price, the sound and quality are great. My son loves them with his iPod. They fold into a nice carrying case. Bought two of these for my young children to use with a DVD player for car trips.
Comreak 12:53pm on Saturday, June 5th, 2010 
Good headphones, especially for the price. I...  Great sound, I was really suprised by these. I was looking for a good light headspones, an...  Very good sound quality and good price After some months (one year,more or less).
macxcool 3:42pm on Sunday, April 4th, 2010 
Outstanding value. I have no reason to turn my $10000 home system on. The ear buds fit perfectly, the noise isolation is outstanding.
Marcolino 5:33am on Thursday, April 1st, 2010 
"I bought these headphones b/c I needed some headphones to stay in my ear. Perfect for anyone who sweats a lot when they run or exercise.
Archangelix 2:51am on Monday, March 29th, 2010 
Packaged very well[...]. At Beach Camera's price you can't go wrong with the headphones. Thanks!! Comfortable","Compact","Durable","Good Bass". I use this headset in my in home studio. I'm disabled and unable to leave my home but if I could do so I would take these little beauties with me.
rishi 10:39am on Friday, March 26th, 2010 
These are excellent for portable players, the...  The treble may be a little laid back but it is still there and detailed, bass is very impressive.
wickedpuppy 9:04pm on Saturday, March 20th, 2010 
Worth every penny plus some These headphones met all my expectations, they sound great isolate outside sounds and carry great bass signal....

Comments posted on www.ps2netdrivers.net are solely the views and opinions of the people posting them and do not necessarily reflect the views or opinions of us.

 

Documents

doc0

*NEC-405 NEAX2400 UG #2

1/22/03

2:42 PM

Page I

NEAX 2400IPX

Internet Protocol eXchange

DTERM DTERM

SERIES i

USER GUIDE

Page II
LIABILITY DISCLAIMER NEC AMERICA, INC. RESERVES THE RIGHT TO CHANGE THE SPECIFICATIONS, FUNCTIONS, OR FEATURES, AT ANY TIME, WITHOUT NOTICE. NEC AMERICA, INC. HAS PREPARED THIS DOCUMENT FOR USE BY ITS EMPLOYEES AND CUSTOMERS. THE INFORMATION CONTAINED HEREIN IS THE PROPERTY OF NEC AMERICA, INC. AND SHALL NOT
BE REPRODUCED WITHOUT PRIOR WRITTEN APPROVAL FROM
NEC AMERICA, INC. COPYRIGHT 2003 NEC AMERICA, INC. PRINTED IN THE USA

Page 1

TABLE OF CONTENTS
KEYS AND LAMPS SOFT KEYS TERMINAL SETUP WITH THE UP/DOWN KEY TERMINAL SETUP WITH THE FEATURE KEY LOGIN/LOGOUT (IP ENABLED DTERM/DTERM IP ONLY) TO ORIGINATE AN OUTSIDE CALL TO ORIGINATE AN INTERNAL CALL MULTILINE APPEARANCE TO ORIGINATE A CALL USING SPEED CALLING ( ONE-TOUCH BUTTONS) TO ORIGINATE A CALL USING SPEED CALLING ( INDIVIDUAL /GROUP ) TO ORIGINATE A CALL USING SPEED CALLING SYSTEM ACCOUNT CODE FORCED ACCOUNT CODE AUTHORIZATION CODE VOICE CALL TO ANSWER A VOICE CALL HANDS-FREE AUTOMATIC INTERCOM MANUAL INTERCOM DIAL INTERCOM TO PLACE A CALL ON HOLD TO PLACE A CALL ON EXCLUSIVE HOLD TO TRANSFER A CALL CONFERENCE TO ESTABLISH A BROKER CALL TO ANSWER A CAMPED - ON CALL CALL WAITING ORIGINATING 30 31
CALL PARK CALL PICK-UP ( GROUP ) CALL PICK-UP ( DIRECT) OUTGOING TRUNK QUEUING OFF-HOOK TRUNK QUEUING EXECUTIVE OVERRIDE LAST NUMBER REDIAL CALL FORWARDING ALL CALLS CALL FORWARDING BUSY LINE CALL FORWARDING DONT ANSWER LOGGED OUT IP STATION CALL DESTINATION CALL BACK TO SAVE AND REPEAT A NUMBER TO LEAVE A MESSAGE TO ANSWER A MESSAGE VOICE MAIL SYSTEM MEET-ME PAGING PAGING TRANSFER BOSS/SECRETARY TRANSFER BOSS/SECRETARY MW LAMP CONTROL BOSS/SECRETARY OVERRIDE DO NOT DISTURB PRIVACY PRIVACY RELEASE INDEX LCD DISPLAYS FACE LAYOUT

Page 2

KEYS AND LAMPS

PROGRAMMABLE KEYS

These are examples of Dterm features available by pressing the programmable keys. Some features may be programmed by the user. Keys must be programmed by the telephone system administrator.

FWD-BY

Press key to activate, verify or cancel Call Forwarding Busy Line feature.

FWD-NA

Press key to activate, verify or cancel Call Forwarding Dont Answer feature.
Press key to activate Manual Intercom.
Press key to activate Automatic Intercom.

MSG (Message)

Press key to leave message indication at station in no answer or busy condition.
Press key to activate Dial Intercom.

MULTILINE APPEARANCE

A programmable extra extension key. Press this key to see status of extra extension.

DND (Do Not Disturb)

Press key to activate or cancel Privacy feature.
Press key to activate or cancel Call Forwarding All Calls feature.

MW-SET

Press key to leave message waiting indication on boss station from secretarys station.

Page 3

MW-CANCEL
Press key to cancel message waiting indication on boss station from secretarys station.
Liquid Crystal Diode (LCD) display provides Dterm activity information plus date, time and Soft Key operation.
Press key to release Privacy feature.
Some Feature keys have a built-in Light Emitting Diode (LED) that lights or flashes according to the activity of that Feature key.
S&R (Save and Repeat)
Press key to store a number or redial a stored number.
Press key to cause chime at predetermined station.

Call Indicator Lamp

Lamp at top of Dterm Display flashes when a call terminates to the terminal. Lamp lights steadily when a message has been left.

Page 4

FUNCTION KEY ACTIVITIES
Feature + 1 = Turns microphone on or off. Feature + 2 = Adjusts handset receiver volume. Feature + 3 = Selects ringer tone. Feature + 4 = Adjusts transmission/receiving

SOFT KEYS

The Soft Keys on the Dterm Series i/Dterm IP provide a set of functions on the LCD that adapts to the changing state of the telephone. While default Soft Key settings are provided, desired functions can be assigned to individual stations as required. The Soft Keys, at the bottom of the LCD, can display the blinking names of available functions, names of user-assigned functions and names of functions assigned by a specific Soft Key pattern. The Soft Keys displayed can vary, depending on the state of the phone and/or when the Next/Previous button is pressed.

Note: Soft Key functionality is optional and may not be available on your Dterm Series i/Dterm IP telephone.

volume.

Feature + 5 = Activates hands-free operation. Feature + 6 = Deactivates hands-free operation. Feature + 7 = Turns call indicator lamp on or off
for incoming call notification. (If turned off, this lamp will still light to indicate message waiting.)
Feature + 8 = Turns Dynamic Dial Pad on or off.

Page 5

4051 7:35 AM MON 18 JUL 2002 >>> MIC DND

Exit Help

DEFAULT FUNCTION DISPLAYS FOR EACH STATUS
Default Soft Key settings are provided corresponding to particular functions. Different Soft Key settings are displayed at the bottom of the LCD depending on the state of the call, as shown below. Different patterns of Soft Key settings can be registered for individual call states and assigned to individual terminals as required.

Exit Key

Press the Exit key to exit the Help program.

Help Key

Press the Help key. Press desired Soft Key for helpful information about that key.

(Time Display)

MIC (Microphone)
Press the Soft Key below MIC to activate or deactivate the Microphone. LED on Mic key will illuminate when Mic is on.

>>>

DIAL TONE/ DIALING (1)
Press the Soft Key to allow denying access to the station line for incoming calls.

PICK FDA

Page 6

SOFT KEY FEATURES

RINGING

MIC VOICE

>>> 2000

BUSY (1) (2) CONNECTION

MIC BUSY
When the Soft Key corresponding to a desired function name is operated, the selected function name starts to blink on the LCD. The blinking display of available functions takes precedence over the display of functions specified by the Soft Key pattern.
FDB (Call Forwarding Busy)
Permits a call to a busy station to be immediately forwarded to a predesignated station.

S&R

FDA (Call Forwarding All Calls)
Permits all calls destined for a particular station to be routed to another station regardless of the busy or idle status of the called station.

CONSULTATION HOLD

TRANSFER

2000 >>>

MIC CONF
FDL (Logged Out IP Station Call Destination)
Enables a system to transfer the call to appropriate station when Dterm whose Logged Out IP Station Call Destination has already been registered is in logout status.

Page 7

E-OVR (Executive Override)
Enables selected station users, upon encountering a busy condition at an internal station, to bridge into the busy connection.

TO ADJUST RINGER TONE

MICROPHONE ON/OFF
LED on Mic key shows the status of the built-in microphone.

----------

the v orw key during ringing.
To change microphone status:

TO ADJUST LCD

CONTRAST
Soft Key associated with the MIC Display or press Feature and 1.
the v orw key in the on-hook status.
TO ADJUST INITIAL RECEIVING VOLUME

LCD ---------------

Handset receiver volume can be changed.
To change the handset receiver volume:

x Press Feature and 2.

The LCD displays the current volume status.

RCV VOL.

Page 12

x Press Feature and 2

to alternate between Large and Small volume.

TONE NO. 9

FREQUENCY (HZ) 520/660HZ 520/660HZ 1100/1400HZ 660/760HZ MELODY 1 MELODY 2 MELODY 3 MELODY 4 MELODY 5
MODULATION (HZ) 16HZ 8HZ 16HZ 16HZ

TO SELECT RINGER TONE

The Dterm Series i/Dterm IP has nine kinds of ringer tones that you can select.

x Press Feature and 3.

RINGER TONE
The LCD displays the selected tone number (n=1 ~ 9).
Note: Tone number 5~9 may not be available in all feature packages.

Page 13

TO ADJUST TRANSMISSION/

RECEIVING VOLUME

CALL INDICATOR LAMP ON/OFF
The user can choose to turn the call indicator lamp either on or off during ringing.
Handset volume can be changed.

x Press Feature and 4.

T/R VOL.

x Press Feature

The LCD displays the current volume.

x Press Feature and 4

and 7. The LCD displays:

Direct Dial Pad

INDICATOR
again to alternate between Small and Large volume.

TO ACTIVATE HANDS-FREE

To set hands-free on:

x Press Feature and 5.

HANDS FREE
Note: The call indicator lamp lights when used as a Message Waiting Lamp, even when it is turned off by the above operation.

The LCD displays:

To set hands-free off:

and 6. The LCD displays:

Page 14

DYNAMIC DIAL PAD ON/OFF

The user can originate a call at first hand without lifting handset or pressing Speaker key.

x Press Feature and 8.

LOGIN/LOGOUT (IP ENABLED DTERM/ DTERM IP ONLY)

TO LOGIN

When login mode is activated, following procedure is required.

x Enter

Note: When this feature is ON, the user may initiate a call by immediately dialing the number and the station will go hands-free off-hook automatically.
login code and press SET key. (The station number is used as the Login code.)

LOGIN: PASSWD: CANCEL BK

the Redial button.

LNR[*]/SPD[ ] -X XXXXXX
the desired speed calling number.

Page 19

TO ORIGINATE A CALL USING SPEED CALLING SYSTEM
TO PROGRAM SPEED CALLING SYSTEM KEY (ON ONE-TOUCH SPEED CALLING KEY)
x Press Feature key. x Press
TO OPERATE FROM THE SPEED CALLING SYSTEM KEY

the Speed Calling System

the Dterm does not have the Speed Calling System key, dial the Speed Calling System access code, then the abbreviated call code.
desired oneSPEED SET (Time Display) touch speed key. The LCD displays previously stored digits. the Speed Calling System access code and the abbreviated call code.
TO OPERATE FROM THE DIRECTORY KEY

Directory key.

the abbreviated call code (maximum of 4 digits).

x Press Feature again.

Page 20

ACCOUNT CODE

TO ENTER
x Lift handset or press Speaker, receive dial tone. x Enter
Account Code, receive dial tone and dial desired number.
Note: Authorization and Account Codes may be up to 20 digits combined.
feature access code, receive service set tone. Account Code (up to 10 digits). dial tone and dial desired number.

FORCED ACCOUNT CODE

x Receive
TO ENTER ACCOUNT CODE AFTER

AUTHORIZATION CODE

feature access code, receive service set tone. Forced Account Code (up to 10 digits), receive dial tone.
feature access code for Authorization Code, receive service set tone. Authorization Code, receive second service set tone.

Page 21

TO ENTER WITHOUT ACCOUNT CODE
x Lift handset or press Speaker, receive dial
Authorization Code, or call will be denied.
Note: This option is available only if system is programmed with Least Cost Routing.
x Enter feature access code, receive service set
TO ENTER WITH ACCOUNT CODE (SEE ABOVE)
Service set tone is optional depending upon system programming.
Note: If a 16- or 32-button display terminal is used, the display indicates all of the digits dialed.
Authorization Code (up to 10 digits). dial tone, dial desired number.
handset, receive dial tone. desired number.

x Dial x If

an Authorization Code is required, caller hears special dial tone.

Page 22

VOICE CALL
handset. desired station number.
Note 1: A Voice Call may be programmed on a one-touch speed key by pressing Speed Dial button, dialing the extension and pressing the Transfer key. (V displays if programming on an LCD Display Dterm. Save by pressing Speed Dial again.) Note 2: If called party is on their line when a Voice Call is attempted, calling stations display indicates: VOICE BUSY

x Press Voice. x Speak

to called

party.

USING THE SOFT KEY

handset.

desired station number; VOICE Soft Key appears while station is ringing.
Note 3: A voice call is restricted if called partys station is not a Dterm. Display indicates: VOICE REST

x Press VOICE Soft

Key. Speak to called party.

Page 23

TO ANSWER A VOICE CALL HANDS-FREE

x Receive x Press

AUTOMATIC INTERCOM

TO INITIATE

incoming Voice Call.
handset or press Speaker key.

Called party

the MIC Soft Key or Mic. LED lights.

Calling station

x Press x Hear

the AICM key. ringback

x Respond

hands-free.

NOTE: If privacy is required, lift handset.

x AICM key

Calling party
flashes red indicating an incoming intercom call.

x Press AICM,

lift handset or press Speaker. LED lights solid green. called station is engaged in a non-intercom call, the station may press AICM after placing

Page 24

original caller on hold (with HOLD key).

MANUAL INTERCOM

TO BRIDGE INTO AN AUTOMATIC

INTERCOM CALL

Note: Bridging is an optional feature.
Overriding party Called party
the AICM key, OVERRIDE lift handset or press (Time Display) Speaker. three-party conference is established.

x Press MICM,

lift handset or press Speaker, ringback tone is heard.
the SIG key if it is desired for the called station to hear ringing.

x MICM

key flashes, indicating an incoming call. Ring tone may also be heard.

x Press MICM.

Page 25
handset or press Speaker, LED lights solid green. called station is engaged in a non-intercom call, the station may press MICM after placing original caller on hold (with Hold key).

DIAL INTERCOM

TO BRIDGE INTO A MANUAL INTERCOM CALL

Overriding party

handset or press the Speaker key.

x Press DICM key. x Dial

lift handset or press Speaker. three-party conference is established.

OVERRIDE

desired intercom station number. Receive ringback tone.

x DICM LED

Note 1: The SIG key signals the corresponding station when speaking over the intercom path is unnecessary. Note 2: Two-button Manual Intercom provides one button for signalling and one for talking. A separate signalling button can be used in many ways for the secretary to alert a boss, or vice versa.

Direct Call Pick-up access code and the station number to be picked up. to calling party is established.
Trunk Busy OG-Q SET (Time Display) indication. Press CALL BACK. Call is placed in queue for next available trunk. trunk is available, setting station is alerted by ringing and flashing red LED. lift handset. Dial tone is heard or number is automatically dialed if NEAX2400 IPX is programmed with Least Cost Routing.

PICK UP

2000 DDD

x When

busy, original call must be placed on hold before new call can be picked up.

x Press Speaker or

Page 36

OFF-HOOK TRUNK QUEUING

x Press Speaker, x Dial x Dial

EXECUTIVE OVERRIDE

IF CALLED STATION IS BUSY

receive dial tone.

x Press OVERRIDE. x Interrupted
Off-hook Queuing access code.

Overridden station

desired telephone number. Encounter a trunk busy condition. user receives service set tone and leaves speaker on. desired number is automatically dialed when a trunk becomes available.
parties receive warning tone.

x Three-way x Conf LED

conference is initiated.

lights.

Page 37
x Press E-OVR Soft x Interrupted

LAST NUMBER REDIAL

parties OVERRIDE (Time Display) receive warning MIC tone and three-way conference is initiated.
Note: Override may be programmed by the NEAX2400 IPX engineer for one of the Programmable Line/Feature keys, or may be programmed by the user on a one-touch speed calling key by storing the Recall and Override access code.
TO RECALL THE LAST NUMBER DIALED

x Press Redial.

Last number dialed is displayed.

x Press Redial key

until desired number is displayed. Up to 5 previously dialed numbers.

LNR[# or *]/SPD[_ _]

x Press # or (Note)
The number on the display is automatically redialed.

-X XXXXXX

party has answered, lift handset or speak hands-free.
Note: A-law Countries: # -law Countries:

Page 38

CALL FORWARDING ALL CALLS

TO SET

Page 41

CALL FORWARDING DONT ANSWER
Speaker. Call Forwarding SET Dont Answer is set. FORWARD(Time Display)

x Press FDN Soft x Dial

setting for another station, press MULTILINE APPEARANCE.

x Press FWD-NA or

dial Call Forwarding Dont Answer access code. Receive special dial tone. destination station or external telephone number. Receive service set tone. LED lights (at your station or at the Dterm of the multiline station you are setting).
SET FORWARD SET (Time Display) is displayed; Call MIC Forwarding Dont Answer is set.
verifying for another station, press
MULTILINE APPEARANCE while idle.

x Press FWD-NA.

Page 42
Note 2: Call Forwarding for Busy Line and Dont Answer may be combined depending upon system programming. Note 3: With Soft Key operation, FDB flashes on the display.
(Time Display) dial Call Forwarding Dont Answer cancel code. Receive service set tone. LED goes out at your station (or the Dterm of the multiline station).
Call Forwarding Dont Answer

is cancelled.

Page 43
LOGGED OUT IP STATION CALL DESTINATION

x Press FDL Soft x Dial

Key; receive special Dial Tone.
destination station number.
service set tone; FORWARD SET is displayed.

XXXX >>>

Logged Out IP Station Call Destination access code. destination station number; receive service set tone. handset
Logged Out IP Station Call Destination feature key lighting red or press FDL. indicates the station number calls are forwarded.

x Replace

or press Speaker key. Logged Out IP Station Call Destination is set.
Note: With Soft Key Operation, FDL flashes on the display.

Page 44

handset or press Speaker key; receive Dial Tone. Logged Out IP Station Call Destination cancel code; receive service set tone. handset or FORWARD CANCEL (Time Display) press Speaker key. Logged Out IP Station Call Destination is canceled.
handset or press Speaker key; receive Dial Tone. Key; receive service set tone.
destination station number; receive service set tone.
FORWARD CANCEL Out IP (Time Display) Station Call >>> MIC Destination lamp goes off and FDL indication disappears on the LCD.

x Logged

Page 45

CALL BACK

x Press CALL BACK.
is established when the called party answers.

CALLBACK

Receive service set tone.

CALLBACK SET

Note: Call Back may be programmed by the PBX Engineer on a Programmable Line/Feature Key or by the user on a one-touch speed calling key.

x Press CB Soft

Key and receive service set tone.
the FLASH key and enter Call Back access code.

x CALLBACK

both parties become idle, calling partys phone rings. Calling party would go off-hook and hear ring back tone.The called station would then be ringing.

SET is displayed and the CB Soft Key flashes on the display.

Page 46

TO SAVE AND REPEAT A NUMBER

TO SAVE

x Press Speaker. x Dial
x Press S&R. x S&R
Number is stored in memory.

LED lights.

idle, press S&R. indicates digits sorted.
desired telephone number.
S&R. Dialed number is now stored. S&R LED lights.

TO REPEAT

x Press Speaker. x Press S&R.
internal call. Number is stored in memory.
Dterm automatically redials the programmed number. automatically canceled. LED goes out.

x S&R

Note: If saved number is busy or no answer is received, to save it again, press S&R again before hanging up.

2:43 PM

Page 47

TO LEAVE A MESSAGE

flashing S&R Soft Key. Stored number is automatically redialed. S&R disappears from display.
desired station number. Encounter no answer or busy condition. Message is sent to called Dterm.

Called station

x Press MSG. x Called

station MSG LED lights.

MESSAGE SET
Note 1: Up to four messages can be stored in Dterm memory. Note 2: If a fifth message is attempted, reorder tone is heard and display indicates: Note 3: If station is not equipped to receive messages, reorder tone is heard and display indicates:

MESSAGE BUSY

MESSAGE REST

Page 48

TO ANSWER A MESSAGE

TO DISPLAY

TO ERASE
erase a message without returning the call, press MSG to display desired message.

MESSAGE CANCEL

x Dial # or while
LED is lit. Station is idle.
message displays. Message is erased.
x Press MSG. x Re-press MSG to
display additional messages in order received.

MSG 2001

12:28PM
Note: If station that left message is busy, callback or MSG may be set. If station that left message does not answer, MSG may be set, notifying originating party that a message return was attempted.

TO RESPOND

displaying desired message, press Speaker.

x Press MSG.

Station which left message is automatically redialed. is erased.

x Message

Page 49

VOICE MAIL SYSTEM

x Press Feature key. x Press Message key. x Dial

MEET-ME PAGING

Example: Station A can page Station B. When Station B dials answer code, they are connected.

TO PAGE (STATION A)

desired Voice Mail System access code.
Paging access PAGING code, receive continuous ringback for one second. Station B. off-hook or hang up.

Trunk number

x Press Message key. x Hear

x Page

x Remain

ringback tone.

Page 50

TO ANSWER (STATION B)

If Station A remains off-hook:

PAGING TRANSFER

B dials PAGING Paging answer code, and they are immediately connected.

If Station A hangs up:

Example: Station A receives an important call for Station B who is not at a desk. Station A can page Station B. When Station B dials the Paging answer code, Station A can announce the call and transfer it to Station B.
B dials Paging answer code, and Station A Dterm rings. Station A goes off-hook, they are connected.
Note: Paging function can not be supported with Dterm IP adapter and Dterm IP.

STATION A PAGING

calling party to hold.

Calling trunk number

Receive interrupted TRANSFER(Time Display) dial tone.
Paging access code. Receive continuous ringback for one second. Station B. off-hook or hang up.

Page 51

If Station A remained off-hook:
Stations A and B each display B dials the others number Paging answer TRANSFER XXXX code, and is (Time Display) connected with Station A. Station A announces call.
A hangs up. Station B and the calling party are connected.
(Dependent on System Programming.)
B dials PAGING DDD 3 (Time Display) Paging answer code, and is immediately connected to the calling party.
B dials Paging answer code. Station A Dterm rings.
Stations A and B each display the others number, flashing
A picks up and announces call.

Page 52

BOSS/SECRETARY TRANSFER

SECRETARY

IF BOSS ACCEPTS CALL

x Secretary x Boss

replaces handset.

Option 2

key or Transfer and dial call hold access code. Receive dial tone.

Boss station number

x Press BOSS/SEC

OVERRIDE. Receive

presses station 2001 key and converses with Trunk B. Boss presses Answer to reconnect to Trunk A. hears reorder tone, hangs up.
Secretarys station number
3 bursts of tone. LCD display indicates:
can alternate between the two parties by pressing Answer. boss does not respond to 3 bursts of tone, secretary presses Recall. is connected to Trunk B.

Option 3

Option 1
presses Answer and converses with secretary. Trunk A is placed on hold. hangs up. Boss is connected to Trunk B.

Page 56

Option 4

DO NOT DISTURB

WHILE IDLE (ON-HOOK)

x Press DND.

presses Answer and converses with Secretary. Trunk A is placed on hold. denies call, presses Transfer to return to Trunk A. is returned to Trunk B.

DND SET

Note: With Soft Key operation, DND flashes when set.
Note: If boss has 8/16/32 button display terminal, display always indicates the connected station or trunk at any given time.

DND CANCEL

goes out.

flashing

DND Soft Key.
>>> MIC DND Note: DND must be programmed by the PBX engineer on a programmable feature key.

Page 57

PRIVACY

WHILE OFF-HOOK

PRIVACY SET

PRIVACY CANCEL

LED goes out.

x Privacy

handset. Privacy feature is automatically canceled.
Note: DND must be programmed by the PBX engineer on a programmable feature key.
feature prevents interruptions for the duration of the call.
flashing DND Soft Key. DND flashes when set.

flashing DND Soft Key.

MIC DND

Page 58

PRIVACY RELEASE
Example: Dterm Station B is engaged in a conversation, and allows Dterm Station A to enter the call in progress.

x Station x Station

Example: Dterm Station A requests entrance into Station Bs call in progress.
A lifts handset or presses Speaker.

WAIT P-RLS?

A presses the line appearance of Station B. B LCD indicates:
A presses the line appearance of Station B. tone is sent to the interrupted parties (optional). three-way conference is established.

P-RLS?

LOGOUT

Press preassigned Logout button to logout.
MESSAGE SET M MSG XXXX HH:MMPM
Message waiting (calling station and time of message).
Message indication left and busy called station.

MW SET/CANCEL

Message Waiting set or canceled on boss station from secretarys station.
Called station message memory Busy cannot store addition messages.

O OG-Q SET

Outgoing Trunk Queue call placed in queue for next available outgoing trunk.

Page 67

PAGING
Overriding intercom call through bridging. Automatic Intercom. Dial Intercom. Manual Intercom.
Ready to page station, page waiting or page call connection.

Executive Override.

P-RLS SET

Privacy Release set.

P PICK UP XXXX X

P-RLS ?

Prompt requesting privacy release for incoming call.
Call Pickup of station within group showing called and calling stations.

PRIVACY SET/CANCEL

Privacy set or canceled.

Page 68

R RCV VOL. SMALL/LARGE

Receiver Volume status.

Transferred station or trunk number. Page Call Transfer.
Ready for Ringer tone selection.

TRANSFER XXXX

Transferring station number.

S SPEED SET

Speed Calling number saved in memory.
Transferring page call to another station.

T/R VOL. SMALL/LARGE

Transmission Receiving Volume status.

T TRANSFER

Ready to transfer a call.

V VOICE XXXX

Voice Call showing called or calling station number.

Page 69

VOICE BUSY/REST
Voice Call station called is busy or restricted.

W WAIT P-RLS?

Prompt when requesting privacy release at another station.

Page 70

FACE LAYOUT

1 CALL INDICATOR LAMP

Lamp at top corner of Dterm Display flashes when a call terminates to the terminal. Lamp lights steadily when a message has been left. Trunk line access Feature access <One-Touch Speed Dial> (Note 2) Any feature can be assigned. Direct station selection Station speed dial

16 ANSWER

When LED on this key is lighted, press key to answer a waiting call.
DTERM16D (16-LINE WITH DISPLAY)
Call Indicator Lamp 1 LCD Display 2

17 SPEAKER

Controls the built-in speaker which can be used for Hands-free dialing/monitoring. LED on key lights when key is active.

4 Soft Keys

Programmable Keys 6

18 TRANSFER

Allows the station user to transfer established calls to another station, without attendant assistance.

GHI ABC

Recall

Feature Directory

19 HOLD
Press key to place an internal or external call on hold.

5 JKL 8

Mic Message

Redial

Dedicated Function Keys Dedicated Keys

20 DTERM IP ADAPTER

Dterm IP adapter can be attached to Dterm Series i 8D/16D/32D terminals. It supports the same telephony service as the original Dterm terminal.

Transfer

Answer

Speaker

14 Microphone

Speaker Speaker

Page 72
DTERM 32D (32-LINE WITH DISPLAY)

Message

Page 73
DTERM8 (8-LINE NON DISPLAY)
DTERM8D (8-LINE WITH DISPLAY)
Call Indicator Lamp LCD Display

Soft Keys

Programmable Keys

Recall Feature Directory

Dedicated Function Dedicated Keys Keys

Microphone 14

Page 74
For more information contact:
NEC America, Inc. 2003 NEAX and Dterm are registered trademarks of NEC Corporation.
NEC America, Inc. Corporate Networks Group 6555 N. State Highway 161 Irving Texas 75039 Visit our Web site at www.cng.nec.com

FPO BAR CODE

188301

doc1

NEAX 2000 IPS

SERIES I IP

USER GUIDE

SOFT KEYS (4) LCD DIRECTORY FEATURE EXIT CALL INDICATION LAMP
DTR-16LD-1 (BK) TEL RECALL ITR-16LD-3 (BK) TEL CONFERENCE

REDIAL ANSWER

PROGRAMMABLE KEYS
16 Flexible Line/Feature Keys

USER PROGRAMMABLE KEYS

16 DSS/One Touch Speed Dial Keys

MESSAGE

DTR-16D-1 (BK) TEL ITR-16D-3 (BK) TEL

HOLD TRANSFER SPEAKER

VOLUME/CONTRAST BUILT-IN MICROPHONE

UP/DOWN

DTR-32D-1 (BK) TEL ITR-32D-3 (BK) TEL
DTR-8D-1 (BK) TEL ITR-8D-3 (BK) TEL

TABLE OF CONTENTS

KEYS AND LAMPS....5 LCD DETAIL OF LINE KEYS FOR Dterm SERIES I 16LD..12 TERMINAL SETUP WITH THE FEATURE KEY..13 DTERM IP LOGIN OPERATION...15 DTERM IP LOGOUT OPERATION...15 TO ORIGINATE AN OUTSIDE CALL VIA EXTENSION LINE KEY..16 TO ORIGINATE AN INTERNAL CALL...16 TO ORIGINATE A CALL VIA DYNAMIC DIAL PAD..16 OUTSIDE LINE APPEARANCE...17 AUTOMATIC IDLE RETURN...17 TO ORIGINATE A CALL USING ONE-TOUCH BUTTONS..18 TO ORIGINATE A CALL USING SPEED CALLING (INDIVIDUAL/GROUP).19 ACCOUNT CODE....19 FORCED ACCOUNT CODE...20 AUTHORIZATION CODE...20 VOICE FIRST/TONE FIRST...20 TO ANSWER A VOICE CALL HANDS FREE...21
AUTOMATIC INTERCOM...21 MANUAL INTERCOM....22 DIAL INTERCOM...23 DIAL BY NAME USING SYSTEM SPEED DIALING..23 DIAL BY NAME USING STATION SPEED DIALING..24 TO SAVE A NAME & NUMBER TO STATION SPEED DIALING..25 TO TRANSFER A CALL...25 TO PLACE A CALL ON HOLD...26 TO PLACE A CALL ON EXCLUSIVE HOLD..27 TO PLACE A CALL ON REMOTE HOLD...28 CONFERENCE....29 TO ESTABLISH A BROKER CALL...30 CALL BACK (STATION)...30 TO ANSWER A CAMPED-ON CALL...31 TO SET CAMP-ON (TRANSFER METHOD)..31 CAMP-ON (CALL WAITING METHOD)..32 CALL PARK (SYSTEM)...33 CALL PICKUP (GROUP)...34 CALL PICKUP (DIRECT)...34
OUTSIDE LINE QUEUING (FROM EXTENSION DIAL TONE)..35 TIMED QUEUING (OUTSIDE LINE ONLY)...35 EXECUTIVE OVERRIDE...36 LAST NUMBER REDIAL...36 CID CALL BACK....37 CALL REDIRECT...38 CID CALL DISPLAY....38 CALL FORWARDING-ALL CALLS...39 CALL FORWARDING-BUSY...40 CALL FORWARDING-NO ANSWER...41 CALL FORWARDING DESTINATION...42 TO SAVE AND REPEAT A NUMBER...42 INTERNAL ZONE PAGING WITH MEET-ME PAGE..43 BOSS/SECRETARY CALLING...44 BOSS/SECRETARY OVERRIDE...45 DO NOT DISTURB...46 TIMED REMINDER...47 PRIVACY RELEASE...48 RETURN MESSAGE SCHEDULE...48
NAME DISPLAY....50 WHISPER PAGE...52 SYSTEM CLOCK SETUP BY STATION DIALING..53 DAY/NIGHT MODE CHANGE BY STATION DIALING..53 QUICK REFERENCE GUIDE....54

KEYS AND LAMPS

Function Keys Hold Press key to place an internal or external call on hold. Transfer Allows the station user to transfer established calls to another station, without attendant assistance. Speaker Controls the built-in speaker which can be used for Hands Free dialing/monitoring. LED on key lights when key is active. Answer When LED on this key is lighted, press key to answer a waiting call. Redial Press key to activate redial feature. Press redial and scroll back through numbers that have been dialed. Until the desired number is displayed. Press the * key to activate dialing. Conf Press key to establish a three-way conversation. LED on key lights when key is active. - 5-

Recall Press key to terminate established call and resieze internal dial tone. Feature Used to activate terminal setup functions and to program One-Touch Speed Dial/Feature Keys. MIC Used to activate or deactivate the Microphone. The MIC LED will illuminate when MIC is on. Message
To search Message Waiting.

Directory

Press key to display the directory of Dial by Name for Station Speed Dialing.
UP/DOWN Used to adjust LCD contrast, speaker/receiver volume, and ringer volume. LCD Contrast: Press up or down key while idle. Speaker/Receiver Volume: Press up or down key during conversation.
Ringer Volume: Press up or down key during ringing. Programmable Keys NOTE: These are examples of Dterm features available by pressing the programmable keys. Some features may be programmed by the user. Keys must be programmed by the telephone system administrator. AICM Press key to activate Automatic Intercom. CB (Call Back) Press key to activate. DICM Press key to activate Dial Intercom. DND (Do Not Disturb) Press key to activate or cancel Privacy feature. FD-A (Call Forwarding- All Calls) Press key to activate or cancel Call Forwarding - All Calls feature.
FD-B (Call Forwarding- Busy) Press key to activate, verify, or cancel Call Forwarding - Busy feature. FD-N (Call Forwarding- No Answer) Press key to activate, verify, or cancel Call Forwarding - No Answer feature. FD-DS (Call Forwarding- Destination Set) Press key to activate, Call Forwarding - Destination. FD-DC (Call Forwarding- Destination Cancel) Press key to deactivate, Call Forwarding - Destination. MICM Press key to activate Manual Intercom. S&R (Save and Repeat) Press key to store a number or redial a stored number. SECONDARY APPEARANCE (Sub line) A programmable extra extension key, other than Primary extension. Press key to see status of extra extension. MUTE Press key to activate Mute function on handset, headset or internal microphone.
Soft Keys (Factory Assigned Features) Headset Press the Soft Key below "Headset" to activate or deactivate Headset operation. Help Press the Help Key. Press desired Soft Key for helpful information about that key. Exit Press the Exit Key to exit the Help program. OHROFF (Off Hook Ringing Off) It will disable ringing on this phone while in use. OHR-ON (Off Hook Ringing On) It will allow ringing on this telephone while in use. On Hook State (Telephone is idle) Off Hook State (Telephone is in use)

To Use Soft Keys Four soft keys are indicated in the LCD According to the status of the Multiline Terminal. Press the SCROLL (>>>>) key to scroll the desired key if there are other functions available. Press a desired key under the indicated 4 Soft Keys on the LCD. The service feature of the pressed Soft Key is operated.
To Use the Help Key Press the HELP key and the Soft Key. Explanation of the pressed Soft Key is indicated on the LCD. Press the EXIT key to leave Help.
Lamps Call Indicator Lamp Lamp at top corner of Dterm Display flashes when a call terminates to the terminal. Lamp lights steadily when a message has been left. LCD Liquid Crystal Diode (LCD) display provides Dterm activity information plus date, time and Soft Key operation. LED Some function keys have a built-in Light Emitting Diode (LED) that lights or flashes according to the activity of that function key. MIC (Microphone) Lamp Lamp displays the status of the built-in microphone used for hands free operation. Feature Key Activities Feature + 1 = Turns microphone on or off. Feature + 3 = Selects ringer tone. Feature + 4 = Adjusts transmission/receiving volume. Feature + 0 = Activates ringer. (dependent on Systems Programming.)
LCD DETAIL OF LINE KEYS FOR Dterm SERIES I 16LD
User status Idle Call on I-Hold/Exclusive Hold Call on Other Party Hold Incoming Call I-Hold/Exclusive Hold Recall Other Party Hold Recall During Conversation Call Transfer Call Conference During Conversation(Other Party) Active Feature(Call Forwarding Set) Icon No Icon Flashing Flashing Flashing Flashing On Steady Flashing Pattern

On Steady

TERMINAL SETUP WITH THE FEATURE KEY
Microphone On/Off The MIC lamp shows the status of the built-in microphone. To change microphone status:
Press Soft Key associated with the MIC Display or press Feature and 1.
To select ringer tone The Dterm Series I has 8 ringer tones that you can select.
Press Feature and 3. The LCD displays the selected tone number. Tone No. Frequency/Modulation 520+660Hz, 16Hz Modulating Signal 520+660Hz, 8Hz Modulating Signal 1400+1100Hz 1100Hz 540Hz 1100+1400Hz, 16Hz Modulating Signal 660+760Hz, 16Hz Modulating Signal 1100Hz Envelop Signal
To adjust ringer tone NOTE: Access to feature is based on data assignment.
Press Feature and 0. Ringer activates. Press 3. The LCD displays the selected tone number (n=1~8). Press 3. Next tone is selected.
To preset ringer volume NOTE: Access to feature is based on data assignment.
Press Feature and 0. Ringer activates. Press down or up Key. Ringer volume decreases or increases. Press Feature Key to stop ringing.
To adjust transmission/receiving volume (During valid call)
Press Feature and 4. The Transmit Volume increases. Press Feature and 4 again. Transmit Volume returns to normal. Press down or up. Receive Volume decreases or increases.

DTERM IP LOGIN OPERATION

Option 1 Automatic Login Mode (Authentication by MAC Address)
During start up the LCD displays the login screen. Enter the Station Number at the LOGIN: prompt. Press the Set key (Soft Key). Press the OK key (Soft Key). The time and date appear on the LCD. NOTE: After the first registration, Login operation is not required. Option 2 Protected Login Mode
During start up the LCD displays the login screen. Enter the Station Number at the LOGIN: prompt. Press the Set Key (Soft Key). Enter the Password at the PASSWD: prompt. Press the OK Key (Soft Key). The time and date appear on the LCD.
DTERM IP LOGOUT OPERATION
Go off-hook or press the Speaker Key. Receive Dial Tone. Dial the Logout Feature Access Code or press the Logout Key or Logout Soft Key. Receive Service Set Tone. The LCD displays the login screen.
TO ORIGINATE AN OUTSIDE CALL VIA EXTENSION LINE KEY
Lift handset or press Speaker key, receive dial tone. Dial the Central Office access code, e.g. 9. Dial desired telephone number. Use handset or MIC to converse.
TO ORIGINATE AN INTERNAL CALL
Lift handset or press Speaker key. Receive dial tone. Dial desired station number. Use handset or MIC to converse.
TO ORIGINATE A CALL VIA DYNAMIC DIAL PAD
While phone is idle, Dial desired station number.

-- OR

While phone is idle, Dial desired trunk access code, e.g. 9 Dial desired telephone number. Use handset or MIC to converse. NOTE: Access to feature is based on data assignment.

OUTSIDE LINE APPEARANCE

To originate:
Press the OUTSIDE LINE APPEARANCE feature key. Lift handset or press Speaker key, receive Central Office or distant PBX dial tone. Dial the destination.

To Answer:

Press the LINE APPEARANCE feature key (ringing and flashing LED alert user to incoming call.) Lift handset or press Speaker key. Speak with incoming party.

AUTOMATIC IDLE RETURN

Press Speaker key. Receive dial tone. Dial desired number.

-- OR -

Press One Touch key. When called party answers, converse. When called party hangs up, your Dterm automatically returns to idle
TO ORIGINATE A CALL USING ONE-TOUCH BUTTONS

TO SAVE A NAME & NUMBER TO STATION SPEED DIALING
To register name & number:
Press the DIRECTORY key Press the UP or DOWN key to select buffer to be programmed Press the FEATURE Key Using the key pad enter the name Press the FEATURE Key Using the key pad enter the number NOTE: When entering an outside number you must include the Trunk Access Code (i.e., 9) followed by area code and number. For the 16LD phone using one of the line keys as speed dial will only display 8 characters; For a name the first 7 characters plus * for names longer than 8 characters and the * plus last 7 digits of a number longer than 8 digits. Example: Name display programmed is ABCDEFGHI button will show ABCDEFG*. Number display programmed is 123456789 button will show *3456789.

TO TRANSFER A CALL

After conversing, ask party to hold. Press Transfer key. Receive interrupted dial tone. Dial destination station's extension, hang up or wait for answer.

TO PLACE A CALL ON HOLD

Press Hold key. Held line wink flashes. NOTE: If held line appears on other Dterm stations, the associated LED flashes red slowly. To retrieve:
Lift handset or press Speaker key. Press held line. Use handset to converse. NOTE: Any station with this line appearance can retrieve the call. If unanswered:
After preprogrammed time, Automatic Recall is initiated. Visual and audible signal (rapid flash and ring burst) is sent to station that placed call on hold. NOTE: Hold shows as a flashing green LED on your phone. The same line on other phones shows as a flashing red LED. Recall shows as a flashing green LED on your phone and flashing red LED on other phones with the same line.
TO PLACE A CALL ON EXCLUSIVE HOLD
Press Hold key twice. Line appearance indicates interrupted wink. NOTE: If held line appears on other Dterm stations, LED remains steadily lit red. To retrieve:
Lift handset or press Speaker key. Press held line. Use handset to converse. NOTE: Only Dterm that set Exclusive Hold option can retrieve the call. If unanswered:
After preprogrammed time, Automatic Recall is initiated. Visual and audible signal (rapid flash and ring burst) is sent to station which placed call on Exclusive Hold. Recall shows as a flashing green LED on your phone, and solid red on other phones with same line. NOTE: Exclusive Hold excludes any other phone from picking up your held call. Exclusive Hold shows as a flashing green LED on your phone. The same line on other phones appears as a solid red LED.

TO PLACE A CALL ON REMOTE HOLD
While in conversation with Station/Trunk Party Press the TRANSFER key. Receive interrupted dial tone Dial destination station's extension. Receive ring back tone. Press the Hold key. (Call is placed on hold at the destinations stations extension) Hang up.
To retrieve at destination:
Lift handset or press Speaker key. Press line on hold. Use handset to converse. NOTE: Any station with the destination line appearance can retrieve the call.
To retrieve from phone without destination line appearance:
Lift handset or press Speaker key Dial Access Code for Direct Call Pick-Up Dial destination stations extension Use handset to converse - 28-

CONFERENCE

Option 1
With call in progress, ask party to hold. Press Transfer key, receive interrupted dial tone. Dial desired number. After call is answered, press Conf key. Conf LED lights. Three-way conference is established. If one party hangs up, other two remain connected. Conf LED goes out. Option 2
With call in progress and third party on hold on another Line/Trunk key. Press Conf key, Conf LED flashes. Press Held Line/Trunk key, Conf LED lights. Three-way conference is established. NOTE: Access to Option 2 is based on software revision and data assignment.
TO ESTABLISH A BROKER CALL
While engaged in a call and wishing to consult a third party, press Transfer. Caller is automatically placed on hold. Dial desired party to consult. Press Transfer to return to original caller. Third party is automatically placed on hold. Repeated depression of the Transfer button allows you to alternate between calls. NOTE: The display indicates connected station or trunk at any given time.

CALL BACK (STATION)

Lift handset or press Speaker. Dial desired station number and receive busy tone or ring back tone. Press Call Back or dial 2 and receive service set tone. Restore handset. When busy station becomes idle or the station that did not answer initiates or answers a call or accesses a feature and then becomes idle, the setting station is alerted by ring and flashing LED.
TO ANSWER A CAMPED-ON CALL
While engaged in a call, receive the camp-on indication (one short tone burst). Answer LED flashes. Press Answer key. Call in progress is placed on hold. Connection to camped-on call is established. Press Answer key to return to original call. Camped-on call is placed on hold. Repeated depression of the Answer key allows you to alternate between calls. Display indicates connected station or trunk at any given time.

TIMED QUEUING (OUTSIDE LINE ONLY)
Press Speaker key, receive dial tone. Dial Outside Line access code and desired number. Receive busy tone or ring no answer from distant end. Press Call Back key, LED flashes, leave speaker on. The desired number is automatically be redialed. Pick up handset and converse. NOTE: When station is in Timed Queue mode callers receive busy indication.

EXECUTIVE OVERRIDE

If called station is busy:
Press OVERRIDE key and converse. NOTE: Interrupted parties receive a warning tone.

LAST NUMBER REDIAL

To recall the last number dialed:
Press Redial key. Receive special dial tone. Press #. The number dialed will be redialed and displayed. NOTE: Each time the Redial key is pressed the numbers dialed for the last five calls are displayed sequentially.

CID CALL BACK

To search, call back, or erase a Calling Number using soft-keys:
Lift the handset or press Speaker key. Press MESSAGE key. Press Search soft key to search for desired number. Press CB soft key to call back desired number. Press Erase soft key to erase desired number. To search, call back, or erase a Calling Number without using softkeys:
Lift the handset or press Speaker key. Press MESSAGE key. Dial 1 to search for desired number. Dial 2 to call back desired number. Dial 3 to erase desired number.

CALL REDIRECT

To redirect with Calling Party Information:
While in the CID mode press CRD key. Call is transferred to a pre-assigned destination station. To redirect without Calling Party Information:
Press CRD key. Press incoming line key or line key on hold. Call is transferred to a pre-assigned destination station. NOTE: See CID Display; Access to feature is based on data assignment.

CID CALL DISPLAY

To display Calling Party Information:
Press CID key, CID lamp lights. Calling Party Information is displayed. To redisplay Calling Party Information:
While on a call press CID key to recall the Calling Party Information. Calling Party Information is displayed.
CALL FORWARDING-ALL CALLS

To Set:

Press Speaker key. Receive dial tone. Press FD-A key or dial Call Forward-All access code. Receive special dial tone. Dial destination station or outside telephone number. Receive service set tone. FD-A LED lights (at your station if FD-A key was used). Press Speaker key. Call Forwarding for all calls is set. To verify (with 16 or 32-button Display):
Press Speaker key. Receive extension dial tone. Press FD-A key or dial Call Forward-All access code. Display indicates the station number calls are forwarded to. To cancel:
Press Speaker key. Receive dial tone. Press FD-A key plus * or dial Call Forward-All cancel code. Receive service set tone. LED goes out at your station (or the Dterm of the sub line station). Press Speaker key.

CALL FORWARDING-BUSY

To set:
Press Speaker key. Receive dial tone. Press FD-B key or dial Call Forward Busy access code. Receive special dial tone. Dial destination station or external telephone number. Receive service set tone. FD-B LED lights (at your station or at the Dterm of the sub line station you are setting). Press Speaker key. Call Forward Busy is set. To verify (with Display Phone):
Press Speaker key. Receive dial tone. Press FD-B or dial Call Forward Busy access code. Display indicates the station number calls are forwarded to. To cancel:
Press Speaker key. Receive dial tone. Press FD-B key plus * or dial Call Forward Busy cancel code. Receive service set tone. LED goes out at your station. Press Speaker key. Call Forwarding is canceled. - 40-
CALL FORWARDING-NO ANSWER
Press Speaker key. Receive dial tone. Press FD-N key or dial Call Forward No Answer access code. Receive special dial tone. Dial destination station or external telephone number. Receive service set tone. FD-N LED lights (at your station if FD-N key was used). Press Speaker key. Call Forward No Answer is set. To verify:
Press Speaker key. Receive extension dial tone. Press FD-N key or dial Call Forward-No Answer access code. Display indicates destination number of call forward. NOTE: Call Forwarding for Busy and No Answer may be combined depending upon system programming.
CALL FORWARDING DESTINATION
Press Speaker key. Receive dial tone. Press FD-DS key or dial Call Forward Destination access code. Receive special dial tone. Dial station number to be forwarded to this line. Wait for service set tone. To cancel:
Press Speaker key. Receive dial tone. Press FD-DC key or dial Call Forward Destination cancel code. Dial station number to cancel. Press Speaker key. Call Forward Destination is canceled.
TO SAVE AND REPEAT A NUMBER

To save:

Press Speaker key. Dial desired telephone number. Press S & R key. Dialed number is now stored. S & R LED lights.

To repeat:

Press Speaker key. Press S & R key. Dterm automatically redials the programmed number. S & R automatically canceled. LED goes out. NOTE: If saved number is busy or no answer is received, to save it again, press S & R key before hanging up.
INTERNAL ZONE PAGING WITH MEET-ME PAGE
This allows a system user to page over built-in speaker of Dterm terminal within the assigned zone or all zones. Example: Station A can page Station B. When Station B dials answer code, they are connected. To page (Station A):
Lift Handset. Receive dial tone. Dial Internal Paging access code for the desired zone or all zones or press key assigned for desired zone or all zones. Page Station B. Remain off hook.

To answer (Station B):

Station B dials Meet-Me answer code, and they are immediately connected. NOTE: Access to this feature is based on data assignment.

BOSS/SECRETARY CALLING

Secretary
Lift handset, press boss' ringing line. Ask calling party to hold. Press boss' line again. Voice Call is established to boss extension. Announce the call to the boss. If boss accepts call: Secretary replaces handset. Boss lifts handset, presses flashing line. If boss refuses call: Secretary presses Transfer key to return to calling party. NOTE: Access to this feature is based on data assignment. - 44-

BOSS/SECRETARY OVERRIDE

Example: Station 2000 is boss, Station 2001 is secretary. Boss is connected to 2003. Incoming call on Outside line connects to secretary, but is intended for boss. Secretary
Lift handset to answer Outside line, ask caller to hold. Press Boss' line. Outside line is placed on hold; Boss hears burst of tone and Boss' Answer key flashes. Boss
Hears burst of tone, Answer key flashes. LCD display indicates: Option 1 Boss presses Answer and converses with secretary. Outside line is placed on hold. Secretary hangs up. Boss is connected to Outside line. Boss can alternate between the two parties by pressing Answer key.

Option 2

Boss does not respond to burst of tone, secretary presses Transfer key. Secretary is connected to the Outside line. Option 3 Boss presses Answer and converses with Secretary. Outside line is placed on hold. Secretary is returned to Outside line.

DO NOT DISTURB

Press Speaker key, Receive dial tone. Press DND key or dial DND access code. To cancel: Press Speaker key, Receive dial tone. Press DND key or dial DND cancel code. NOTE: When key is used the LED will light when DND is active.

TIMED REMINDER

Example: Station 2000 wants to be reminded of a 9:00 a.m. meeting. To set:
Press Speaker key. Press Timed Reminder key or dial Timed Reminder access code. Dial the desired reminder time in military format, receive set tone. At 9:00 a.m. on the same day you will receive a reminder call. Upon answering you will hear music source if available. To cancel: Press Speaker key, Receive dial tone. Press Timed Reminder key and # or dial Timed Reminder cancel access code. Receive set tone. Press Speaker key.

PRIVACY RELEASE

Example: D term Station B is engaged in a conversation, and allows Dterm Station A to enter the call in progress.
Station 2000, while engaged in conversation, presses Conf key. Conf key flashes. Station 2001 lifts handset or presses Speaker key. Station 2001 presses the line appearance of Station 2000. A three-way conference is established.

RETURN MESSAGE SCHEDULE

NOTE: With Display Dterm Allows station user to register a return schedule when leaving the office and have the schedule display on the calling Dterm LCD. To set:
Station Speaker. Receive dial tone. Dial Return Schedule access code. Dial the number corresponding to desired message.

Dial 2 3

Message IN:BACK OUT:BACK AWAY:BACK VACATION HH:MM HH:MM MM:DD MM:DD
If 0 or 1: dial desired military time. If 2 or 3: dial month and day. Example: June 24=0624. Receive dial tone. Press Speaker key. To cancel:
Press Speaker key, Receive dial tone. Dial Return Message schedule cancel code. Receive set tone. Press Speaker key. NOTE: Access to feature is based on data assignment.

NAME DISPLAY

NOTE: Display Dterm A name with up to 16 characters can be entered to display the name on other Dterm telephones when making a call.
Press Speaker key, Receive dial tone. Dial the Name Assignment access code and receive special dial tone. Using the keypad, depress the key with the desired letter to display the first letter on the key. The display will indicate the numerical designation. Subsequent depressions will advance through the letters on that key. The Dial Pad Key TABLE can be used as a guide to indicate the key and the number of depressions required to display numbers, letters, spaces and periods. When the desired letter is displayed, depression of the Transfer key will change the letter to a lower case letter (default is upper case). Depress the Hold key to enter that letter and advance to the next entry. Repeat the previous two steps until the desired name is displayed and entered.
Press Speaker key. For example, to enter "Paul": NOTE: When adding/changing/deleting name display for an extension that appears on a key of a 16LD phone a reset of the 16 LD phone is required and can be accomplished by an unplug/plug-in of the phone. For the 16LD phone using one of the line keys as speed dial will only display 8 characters; For a name the first 7 characters plus * for names longer than 8 characters and the * plus last 7 digits of a number longer than 8 digits. Example: Name display programmed is ABCDEFGHI button will show ABCDEFG*. Number display programmed is 123456789 button will show *3456789.

WHISPER PAGE

To initiate: Option 1
Lift handset or press Speaker key Dial desired station number Receive Busy Tone press Transfer key Dial Whisper Page access code or press Whisper Page Feature Key Tone is heard, Listen to conversation and speak to station only Option 2
Lift handset or press Speaker key Dial Whisper Page access code or press Whisper Page Feature Key Receive Feature dial tone Dial Desired station number Tone is heard, Listen to conversation and speak to station only To answer:
Press Answer key. Call in progress is placed on hold. Hold tone source is not transmitted and to the original party. Calling station and called station can privately speak. Press Answer key to return to original call. NOTE: Access to feature is based on data assignment. - 52-
SYSTEM CLOCK SETUP BY STATION DIALING
Press Speaker key or lift handset, Receive dial tone. Press System Clock Setup Key or feature access code. Dial new time in 24 hr format using 6 digits (HHMMSS). Receive service set tone, replace handset or press Speaker key. NOTE: Access to feature is based on data assignment.
DAY/NIGHT MODE CHANGE BY STATION DIALING
Press Speaker key or lift handset, Receive dial tone. Press Day/Night Mode Key or feature access code. Dial 1 for Day/2 for Night/3 for Mode-A or 4 for Mode-B. Replace handset or press Speaker key. NOTE: Access to feature is based on data assignment. If a key is used lamp indication will be: Night Mode =Red lamp on Mode-A =Red lamp flashing (60 ipm) Mode-B =Red lamp flashing (120 ipm)

QUICK REFERENCE GUIDE

Outside Line Queuing-Outside Line Call Back Call Forwarding-All Calls Call Forwarding-No Answer/Busy Line Call Forwarding-Destination Do Not Disturb Last Number Redial Account Code Station Speed Dialing System Speed Dialing Entry Originate Originate Set Cancel Entry Cancel Entry Cancel Entry Cancel Set Cancel 9 *1 #1 *5 #5 *6 #6 *7 #7 *8 #8 ** *# #* ##
Operator Call Call Hold Internal Zone Paging Group 0 Group 1 Group 2 Group 3 Group 4 Internal Zone Paging Group 0 Group 1 Group 2 Group 3 Group 4 Time Reminder/Automatic Wake up Voice/Tone Toggle Station Name Assignment Call Park System Retrieve Call Park System Set Night Pickup Page

5* 5# 6# 6* 72

Answer

Set Cancel

Call Pickup-Direct Call Pickup-Group Call Pickup-Designated Station Speed Dialing Group Entry Cancel

75 7* 7#

NOTE: Above table references factory default settings. Settings may vary on a per system basis.

www.necunified.com

Part Number goes here

 

Tags

Unsung WAR Start D-V55 Honor-frontline CDX-GT430IP Dslr-A700K EG7211 Aculaser CX16 LA46M81BDX Reflecting PD-Z72T IJ650 EH-TW450 DVD-E600 Combi S10 2001 LE20S51BU Tricks CY-PA4003N 171SPF Scooter NW-E105 EL-531WG Controller P4I45d CD4402S-24 WAG200G-EU LAV88840 WF-B1261 MCD296 YST-SW100 20HF5234 10 GSM7248 Tomtom 930T 16 JBC RTS-HE20 MP624 GM-X372 P300-27T 6 16V KH 2302 DVD-H1080R DV 4500 Prolinea 5100 TDM-7574R HFC22 36CZ Hipath 1190 DVP-S525D Travelmate 8200 CHH 8000 Ericsson W395 VP-D903I DMC-FZ10 Speaker WD-1481RD Dock Plus MS-7623 PC-1245 TH-A9 Review Siemens C62 Nokia 1208 VLT4086 FST301 CK2320-80 CQ-DP383W MHC-GNZ77D PCG-GRX316G D 150 NV-GS400GC PRO 3800 Blend XTZ125-2003 KX-TC187B C4100 Officejet 4300 Roadwinr SCD-XE670 P4500-P3200-p1600 KR532 2545CDS Mg166c-USB LP500 DVD6053 ADA890 Finecam L4V KXT7633 AF200S F60850VIM SGH-250 Lunea ES-1124 TLU-43243B - 070 PV-DV203D RC-5900M DDX5024 SC-PM19 RA200 Rcs-lx60d GC4440

 

manuel d'instructions, Guide de l'utilisateur | Manual de instrucciones, Instrucciones de uso | Bedienungsanleitung, Bedienungsanleitung | Manual de Instruções, guia do usuário | инструкция | návod na použitie, Užívateľská príručka, návod k použití | bruksanvisningen | instrukcja, podręcznik użytkownika | kullanım kılavuzu, Kullanım | kézikönyv, használati útmutató | manuale di istruzioni, istruzioni d'uso | handleiding, gebruikershandleiding

 

Sitemap

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101