Netgear DG632 - Configuration
Model: Netgear DG632 Website: http://www.netgear.com.au
1. Open your web browser and enter the website address http://192.168.0.1 2. Click Go 3. A box will appear (see figure 1 below) 4. Enter the Username: admin 5. Enter the Password: password 6. Click OK

Figure 1

7. The Netgear Settings Page will appear. (See figure 2 below) 8. Select No: I want to configure the modem myself 9. Click Next
Level William St Perth, WA, 6000
Ph: 550 Fax: (08) 9488 8900
sales@highway1.com.au www.highway1.com.au
Highway 1 (Aust) Pty. Ltd. ACN: 509 ABN: 394 509

Figure 2

1. Select the Encapsulation as PPPoE (PPP over Ethernet) 2. Enter your Username and Password. Note: If you do not have your Username and Password please contact support on 550. 3. Scroll down the page as per figure 3.

Figure 3

4. Select the Multiplexing Method as: LLC-Based
5. The VPI number should be 8 6. The VCI number should be 35 7. Click on Apply. 8. Once the following steps have been entered you should be connected. 9. If you cannot browse for any websites or download you e-mail please contact support on 550.

Netgear DG632 Ethernet Config Setup Guide
Open your internet explorer browser and type the router address (http://192.168.0.1) to access the web interface.
You will be prompted with a log in box. To access the web interface enter:

Username Password

admin password
Select OK to access the web interface.
gotalk support documentation DG632 Ethernet Config Setup Guide08/2007 Page 1 of 6
You will be prompted with the setup wizard Select Basic Router settings in the left menu
gotalk support documentation DG632 Ethernet Config Setup Guide08/2007 Page 2 of 6
Set your login details as per the screen below Select Apply below
gotalk support documentation DG632 Ethernet Config Setup Guide08/2007 Page 3 of 6
Select WAN Setup from the left menu Set the MTU value as 1460 then select apply
gotalk support documentation DG632 Ethernet Config Setup Guide08/2007 Page 4 of 6
Select Router Status from the left menu When connected successfully the following information will be displayed. The ADSL Port section will show your assigned IP address The Modem section will show as Connected
gotalk support documentation DG632 Ethernet Config Setup Guide08/2007 Page 5 of 6

Show Statistics Link

Connection Status Link
gotalk support documentation DG632 Ethernet Config Setup Guide08/2007 Page 6 of 6