Modular Gigabit Uplinks + 48 10/100 Ports =

flexibility and capacity

10/100/1000 Mbps
Modular Fast Ethernet Switch
With 48 10/100 ports, plus two uplink bays for copper or fiber gigabit modules, N E T G E A R s FS750 Modular Fast Ethernet Switch gives your network a boost in scope and power. You can link to high-speed servers, connect switches, and combine fiber and copper networks. Whether you need a gigabit uplink or additional port capacity, youll have the flexibility to upgrade your network as your business grows and as your budget allows. The high-speed, auto-sensing, 10/100 Mbps ports in the FS750 support Auto UplinkTM for easy-to-use, automatic configuration. They also provide non-blocking, wire-speed filtering and forwarding of traffic. Easy-to-read, front LEDs show ongoing switch status and simplify troubleshooting.

POWERFUL

Equipped with 48 shielded RJ-45 network ports that deliver at 10/100 Mbps.

V E R S AT I L E

Two front module bays allow you to upgrade with copper or fiber gigabit uplinks. Use two copper modules, two fiber modules, or one of each.

E A S Y- T O - U S E

LEDs located on the front panel make switch status easy to observe and troubleshooting Help is there when you need it! NETGEAR provides 24x7 telephone and e-mail technical support in English, with selected local language support during office hours. w w w. N E T G E A R. c o m easy to accomplish.

EFFICIENT

With non-blocking switch capacity, this powerhouse switch can move data at wire speed over fiber or copper connections.
I N S TA L L AT I O N - R E A D Y
This sturdy switch is housed in a 17" metal box and comes with a complete rack mounting kit.
N E T G E A R Inc. 4500 Great America Parkway Santa Clara, CA 95054 USA Phone: 1-888-NETGEAR E-mail: info@NETGEAR.com www.NETGEAR.com
In-Country Phone Support* (24x7 phone support in English, local language support during ofce hours.)
Australia Austria Denmark Canada Finland France Germany Hong Kong Japan 1800-787-638 00800-06384327 (00800-0-NETGEAR) 808-82179 1-888-NETGEAR 0800-111-036 0800-77-17-53 00800-06384327 (00800-0-NETGEAR) 001-800-1233-4566 0120-66-5402 Korea Netherlands New Zealand Norway Singapore Sweden Switzerland United Kingdom United States All Other Countries 00308-11-0319 0800-023-0981 00800-1233-4566 800-12041 001-800-1233-4566 0200-298-298 00800-0638-4327 (00800-0-NETGEAR) 020-7216-0014 1-888-NETGEAR +1 801-236-8499
NETGEAR, the Netgear logo, Everybody's connecting, The Gear Guy and Auto Uplink are trademarks or registered trademarks of Netgear, Inc. in the United States and/or other countries. Other brand and product names are trademarks or registered trademarks of their respective holders. Information is subject to change without notice. All rights reserved. *Free basic installation support provided for 90 days from date of purchase; optional premium support available. April 2003
Model FS750 Switch 1000 Mbps 100 Mbps 10 Mbps

Server with GA622T

T E C H N I C A L S P E C I F I C AT I O N S
Addressing: 48-bit MAC address Acoustic noise: (ANSI-S10.12) 52 dB Heat Dissipation: 12.06 BTU/hr Bandwidth: 16 Gbps Electrical Specifications Power Consumption: 60W maximum Physical Specifications 440 x 205 x 86 mm (17.3 x 8.1 x 3.4 in) 4.3 kg (9.5 lbs) Environmental Specifications Operating temperature: 0 to 40 C (32 to 104 F) Storage temperature: -32 to 104 C (-25.6 to 219.2 F) Operating humidity: 90% maximum relative humidity, noncondensing Storage humidity: 95% maximum relative humidity, noncondensing Operating altitude: 10,000 ft (3,000 m) maximum Storage altitude: 10,000 ft (3,000 m) maximum

SYSTEM REQUIREMENTS

Network Protocol and Standards Compatibility IEEE 802-3i 10BASE-T IEEE 802.3u 100BASE-TX IEEE 802.3ab 1000BASE-T IEEE 802.3z 1000BASE-SX IEEE 802.3x Flow Control Data Rate 10 Mbps differential Manchester encoded, IEEE 802.Mbps with 4B/5B encoding and MLT-3 physical interface for 100BASE-TX 1000 Mbps with 8B/10B encoding PAM-5 physical interface for 1000BASE-T Interface RJ-45 connector for 10BASE-T, 100BASE-TX Fast Ethernet, and 1000BASE-T Gigabit Ethernet Duplex SC fiber connector for 62.5/125 or 50/125 multimode fiber (1000BASE-SX) Performance Specifications Frame forward rate: 14,800 frames/second, maximum on 10 Mbps port (64B packets) 148,000 frames/second, maximum on 100 Mbps port (64B packets) 1,480,000 frames/second, maximum on 1000 Mbps port (64B packets) Forwarding modes: Store-and-forward Network latency: <80s (64-byte frames, 100 Mbps to 100 Mbps) 10/100 buffer memory: 8 MB for 16 ports Gigabit buffer memory: 2 BM per port Address database size: 8,000 media access control (MAC) addresses per system
Category 5 network cables Network card for each PC Network software (i.e. Windows)
PA C K A G E C O N T E N T S
Switch with Rubber footpads for tabletop installation Power cord Rack-mount kit Users guide Support information card Warranty card
w w w. N E T G E A R. c o m

D-FS750-2

NetComm IAC4000 Port Location Mapping
The IAC4000 allows guests to be billed for Internet usage to their room instead of paying upfront as in a traditional hotspot environment. The IAC4000 accepts incoming packets that are tagged using the IEEE 802.1Q VLAN tagging standard. Upon receiving the tagged packet the IAC4000 will redirect the user to a login page requesting them to select a Billing Profile (e.g. 1 day @ $25). The IAC4000 returns untagged packets, so you need to configure your VLAN switch or DSLAM accordingly or else these packets will be dropped. In the following example I have setup the IAC4000 with a Netgear FS750T Smart Switch.

Room 1

FS750T

IAC4000

PMS Micros Fidelio

Description:

Room 1 is connected to port 1 on the FS750T switch Port 50 on the FS750T is connected to the IAC4000's LAN port The IAC4000 is connected to the PMS

October 2005

Netgear FS750T Setup: 0. Navigate to VLAN page 1. Select IEEE 802.1Q VLAN
2. From the VLAN ID drop-down, select 'Add new VLAN'
3. Enter a VLAN ID (eg. 101 for room 1) 4. Port 1 and 50 belong to this VLAN so select Untagged (U) for port 1, and select tagged (T) for port 50. 5. Click 'Apply'
6. From the VLAN ID drop-down select 'PVID Setting' 7. Rename port 1's default VID (PVID) from 1 to 101 (room 1)
8. Click 'Apply' 9. Repeat above for other rooms (eg. room 2 would be on on VLAN 102)
NetComm IAC4000 Setup: 0. 1. 2. 3. Click 'System Setting' Click 'Authentication' Select 'Built-in Authentication' Select 'Scenario A' as the preset option
4. Navigate to 'Billing' menu 5. Create your desired profiles
6. Click 'Port Location Mapping' 7. The 'Location ID' and 'Port Identifier' fields are identical to the VLAN ID you entered in the Netgear FS750T
8. Repeat above for other rooms, or use the batch create feature