LensNo10-AF35mmf-2D-F

AF Nikkor 35mm

Accessoires standard

Bouchon avant embotement 52mm Bouchon rrire dobjectif LF-1

Standard accessories

Instruction manual Bedienungsanleitung Manuel d'utilisation Manual de instrucciones Manuale di istruzioni
52mm snap-on front lens cap Rear lens cap LF-1

Accesorlos estndar

Tapa frontal de presin a 52mm Tapa trasera del pbjetivo LF-1

Serienmiges Zubehr

Aufsteckbarer Frontdeckel 52mm Hinterer Objektivdeckel LF-1

Accessori standard

Tappo frontale da 52mm Tappo posteriore LF-1

English

Thank you for purchasing the AF Nikkor 35mm f/2D lens. Before using your new lens, read the following information carefully so you can get the most out of your lens now and for years to come. When this lens is mounted to a camera body with the object distance information analysis function, object distance information can be transferred to the camera body.
orenge dot. To release the lock, slide the lever in the reverse derectopm.
To protect the lens surface from dirt or damege, replace
as they mignt damage the lens CPU contacts: Auto Extension Ring PK-1. PK-11 (use PK-11A), Auto Ring BR-4 and Auto Ring BR-2 (use BR-2A). This lens cannot be used with the AF Finder DX-1 attached to the Nikon F3AF camera.
Important! Do not attach the following accessories to the lens,
Various interchangeable focusing screens are available for Nikon F6-,F5-,F4- and F3-series cameras to suit any type of lens or picture-taking situation. Those which are recommended for use with this lens are listed in the table. For details, also refer to the specific camera's instruction manual.
Recommended focusing screes (See the reverse.)
both the front and rear caps whenever the lens is not in use. Do not splach water on the lens or drop it in the water because this will cause it to rust and malfunction. If you will not use the lens for a long time, protect it from rust and mold by storing it in a cool, dry place. Also, do not store in direct sunlight, and keep it away from naphthalene or camphor. Reinforced plastic is used for some parts of the lens exterior; to avoid damage, never leave the lens in an excessively not place.
Focal length Maximum aperture Lens construction Picture angle Distance information Distance scale Aperture scale

Specifications

Lens care
Minimum aperture lock Diaphragm Exposure measurement
Clean lens surface with a blower brush.
Minimum aperture lock lever (Illst. A. See the reverse.)
No reproduction in any form of this manual, in whole or in part (except for brief quotation in critical articles or reviews), may be made without written authorization from NIKON CORPORATION.
FUJI BLDG., 2-3 MARUNOUCHI 3-CHOME, CHIYODA-KU, TOKYO 100-8331, JAPAN
For programmed auto or shutter-priority auto shooting, use the minimum aperture lock lever to lock the lens aperture at f/22. 1. Set the lens to its minimum aperture (f/22). 2. Slide the lock lever in the direction of the aperture ring so that white dot on the tab aligns with the
To remove dirt and smudges, use a soft, clean cotton cloth or lens tissue moistened with lens cleaner (separately availavle). Wipe in a circular motion from center to outer edge, taking care not to leave traces and not to touch the other lens parts. To protect the lens surface from dirt or damage, the use of an NC filter is recommended at all times. The lens hood aldo helps to protect the lens.