AF-S DX NIKKOR 16-85mm f/3.5-5.6 ED VR

AF-S DX NIKKOR

P. 2-11

16-85mm f/3.5-5.6

Users Manual Benutzerhandbuch Manuel de lutilisateur Manual del Usuario Anvndarhandbok Pyko oa Gebruikshandleiding Manuale duso
PP. 12-21 S. 22-31 P. 32-41 PP. 42-51 S. 52-61

. 62-71

Jp En De Fr Es Se Ru Nl It Ck Ch Kr
P. 72-81 PP. 82-91 P. 92-103 P. 104-113 P. 114-127
No reproduction in any form of this manual, in whole or in part (except for brief quotation in critical articles or reviews), may be made without written authorization from NIKON CORPORATION.

NIKON CORPORATION

FUJI BLDG., 2-3, MARUNOUCHI 3-CHOME, CHIYODA-KU, TOKYO 100-8331, JAPAN
Printed in Thailand 7MAA43C2-02
Jp En De Fr Es Se Ru Nl It Ck Ch Kr 2
Jp En De Fr Es Se Ru Nl It Ck Ch Kr 3
Jp En De Fr Es Se Ru Nl It Ck Ch Kr 4

ON OFF

NORMAL ACTIVE

a b c CPU d e f

P. 9 P. 9 P. 9 P. 9 P. 5
P. 6 P. 9 P. 9 P. 6 P. 7 P. 7

D300 D90 35mm

DX 1.5

VR II 4

AF 3D ED
Jp En De Fr Es Se Ru Nl It Ck Ch Kr 5

M/A AF-A/AF-S/ AF-C M

Jp En De Fr Es Se Ru Nl It Ck Ch Kr 6

M/A AF

NORMAL ACTIVE AF NORMAL NORMAL ACTIVE

ACTIVE

ON NORMAL NORMAL OFF

NORMAL ACTIVE OFF

OFF ON
Jp En De Fr Es Se Ru Nl It Ck Ch Kr 7

F F /3 0.6

D300/D200
Jp En De Fr Es Se Ru Nl It Ck Ch Kr 8
D100 D90/D80/D50 D70 D60/D40 /
16mm 16mm 24mm 16mm 24mm 24mm

1.0m 2.0m

D300/D200/D90/D80/D50 18mm 20mm 16mm

4 c b 1

Jp En De Fr Es Se Ru Nl It Ck Ch Kr 9
67mm LF-1 HB-39 CL-1015 67mm

3 ED 85mm

IF VCM
Jp En De Fr Es Se Ru Nl It Ck Ch Kr 10

PK K BR-4 SX-1

0.38m 0.38 m 7 16mm f 3.f 5.6 36
F AF-S DX DX 16mm 85mm 1 3.5 5.6
67 mm P=0.75 mm 72 mm 85 mm 485 g
Jp En De Fr Es Se Ru Nl It Ck Ch Kr 11
Notes on Safety Operations

CAUTION

Do not disassemble
Touching the internal parts of the camera or lens could result in injury. Repairs should be performed only by qualified technicians. Should the camera or lens break open as the result of a fall or other accident, take the product to a Nikon-authorized service representative for inspection after unplugging the product and/or removing the battery.
Keep out of reach of children
Particular care should be taken to prevent infants from putting the batteries or other small parts into their mouths.
Observe the following precautions when handling the camera and lens
Keep the camera and lens unit dry. Failure to do so could result in fire or electric shock. Do not handle or touch the camera or lens unit with wet hands. Failure to do so could result in electric shock. When shooting with back-lighting, do not point the lens at the sun or allow sunlight to pass directly down the lens as this may cause the camera to overheat and possibly cause a fire. When the lens will not be used for an extended period of time, attach both front and rear lens caps and store the lens away from direct sunlight. Failure to do so could result in a fire, as the lens may focus sunlight onto a flammable object.
Jp En De Fr Es Se Ru Nl It Ck Ch Kr 12
Turn off immediately in the event of malfunction
Should you notice smoke or an unusual smell coming from the camera or lens, remove the battery immediately, taking care to avoid burns. Continued operation could result in injury. After removing or disconnecting the power source, take the product to a Nikon-authorized service representative for inspection.
Do not use the camera or lens in the presence of flammable gas
Operating electronic equipment in the presence of flammable gas could result in an explosion or fire.
Do not look at the sun through the lens or viewfinder
Viewing the sun or other strong light sources through the lens or viewfinder could cause permanent visual impairment.

Nomenclature

1 Lens hood (P. 18) 2 Lens hood attachment index (P. 18) 3 Lens hood setting index (P. 18) 4 Lens hood mounting index (P. 18) 5 Zoom ring (P. 15) 6 Focal length scale 7 Focal length index 8 Distance scale 9 Distance index line 0 Focus ring (P. 15) a Mounting index b Lens mount rubber gasket (P. 19) c CPU contacts (P. 19) d Focus mode switch (P. 15) e Vibration reduction ON/OFF switch (P. 16) f Vibration reduction mode switch (P. 16)

) : reference page

Jp En De Fr Es Se Ru Nl It Ck Ch Kr 13
Thank you for purchasing the AF-S DX NIKKOR 16-85mm f/3.5-5.6G ED VR lens. DX Nikkor lenses are specially designed for use with Nikon digital-SLR (Nikon DX-format) cameras, such as the D300 and D90. When mounted on Nikon DX-format cameras, the lens picture angle is equivalent to approximately 1.5 the focal length in 35mm format. Before using this lens, please read these instructions and refer to your cameras Users Manual. By enabling vibration reduction (VR), slower shutter speeds (approximately four stops*) can be used, thus increasing the range of usable shutter speeds and zoom positions, particularly when hand-holding the camera. (*Based on results achieved under Nikon measurement conditions. The effects of vibration reduction may vary according to shooting conditions and use.) This lens employs a Silent Wave Motor to drive the focusing mechanism, making autofocusing smooth, silent and almost instantaneous. The focus mode switch d is provided for simple selection of autofocus (A) or manual focus (M) operation. More accurate exposure control is possible when this is mounted on a Nikon camera with 3D color matrix metering capability, because subject distance information is transferred from the lens to the camera body.

Major features

Jp En De Fr Es Se Ru Nl It Ck Ch Kr 14
The use of three aspherical and two extra-low dispersion (ED) lens elements ensures sharp pictures virtually free of color fringing. Also, the seven-bladed diaphragm produces a nearly-circular aperture, a feature which causes out-of-focus areas of the picture to become soft and unobtrusive.
Focusing, zooming, and depth of field
Before focusing, rotate the zoom ring 5 to adjust the focal length until the desired composition is framed in the viewfinder. If your camera has a depth-of-field preview (stopdown) button or lever, depth of field can be previewed through the camera viewfinder. Due to the optical characteristics of this lens, at closer focus distances, the focal length decreases slightly. The distance scale does not indicate the precise distance between the subject and the camera. Values are approximate and should be used only as a general guide. When shooting distant landscapes, depth of field may influence operation so that the camera may focus at a position that is closer than infinity.

Focusing (Fig. A)

Set your cameras focus mode selector according to this chart:
Cameras focus mode AF-A/AF-S/ AF-C M Lens focus mode M/A M Autofocus with Manual focus (focus manual priority assist is available) Manual focus (focus assist is available)
Autofocus with manual override (M/A mode)
Set the lens focus mode switch d to M/A. Autofocus is enabled, but autofocus operation can be overridden by rotating the separate focus ring while pressing the shutter-release button halfway, or by pressing the AF-ON button on the camera body of cameras so equipped. Press the shutter-release button halfway or the AFON button once again to cancel manual focus and resume autofocus.
Getting good results with autofocus
Refer to Notes on using wide- or super wide-angle AF Nikkor lenses (P. 21).
Jp En De Fr Es Se Ru Nl It Ck Ch Kr 15
Vibration reduction mode (VR II)
Basic concept behind vibration reduction
Camera shake when taking pictures from a moving vehicle
Setting the vibration reduction ON/OFF switch (Fig. B)
ON: Vibration is reduced while the shutterrelease button is pressed halfway and also at the instant the shutter is released. Because vibration is reduced in the viewfinder, auto/manual focusing and exact framing of the subject are easier. Vibration is not reduced.

Number of vibrations

Camera shake
Panning shots Strength of vibrations
Jp En De Fr Es Se Ru Nl It Ck Ch Kr 16
Set the vibration reduction mode switch to NORMAL. Set the vibration reduction mode switch to ACTIVE. When taking pictures Set the vibration reduction mode switch to either NORMAL or ACTIVE. When taking panning shots Set the vibration reduction mode switch to NORMAL. When taking pictures from a moving vehicle Set the vibration reduction mode switch to ACTIVE.
Setting the vibration reduction mode switch (Fig. C)
NORMAL: The vibration reduction mechanism primarily reduces camera shake, making smooth panning shots possible. ACTIVE: The vibration reduction mechanism reduces more noticeable camera shake, such as that which occurs when taking pictures from a moving vehicle. In this mode, the lens does not automatically distinguish panning from camera shake.
Notes on using vibration reduction
After pressing the shutter-release button halfway, wait until the image in the viewfinder stabilizes before pressing the shutter-release button the rest of the way down. When taking panning shots, be sure to set the vibration reduction mode switch to NORMAL. If the camera is panned in a wide arc, compensation for camera shake in the panning direction is not performed. For example, when panning the camera in a horizontal direction, vertical camera shake is reduced. This stabilizes the image whilst allowing the desired panning effect to be realized. Due to the characteristics of the vibration reduction mechanism, the image in the viewfinder may be blurred after the shutter is released. This is not a malfunction. Do not turn the camera off or remove the lens from the camera while vibration reduction is operating. Failure to observe this note could result in the lens sounding and feeling as if an internal component is loose or broken when it is shaken. This is not a malfunction. Turn the camera on again to correct this.

With cameras featuring a built-in flash, vibration reduction does not function while the built-in flash is charging. When the camera is mounted on a tripod, set the vibration reduction ON/OFF switch e to OFF. However, it is recommended that the switch be set to ON when using the camera on an unsecured tripod head or with monopod. With autofocus cameras such as D2-series and D300 models, featuring an AF-ON button, vibration reduction does not function when the AF-ON button is pressed.

Setting the aperture

Use the camera to adjust the aperture setting. Zooming the lens from 16mm to 85mm decreases the maximum aperture by 11/3 stop. However, the camera will compensate for any change in aperture by adjusting the shutter speed so as to maintain the correct exposure value.
Variable maximum apertures
Jp En De Fr Es Se Ru Nl It Ck Ch Kr 17
Flash photography using cameras with a built-in flash
To prevent vignetting, do not use the lens hood 1. The built-in flash cannot be used over distances of less than 0.6 m (2.0 ft.).
Digital-SLR cameras Supported focal length/ shooting distance
Using the Bayonet Hood HB-39
Align the lens hood attachment index ( ) 2 on the hood with the lens hood mounting index 4 on the lens, and turn the hood 1 counterclockwise (as viewed when holding the camera with the lens facing away from you) until it clicks into place (Fig. D). Be sure that the lens hood mounting index is aligned with the lens hood setting index ( ) 3. If the lens hood is not correctly attached, vignetting may occur. To facilitate attachment or removal of the hood, hold it by the base (near the lens hood attachment index) rather than its outer edge.

Attaching the hood

Jp En De Fr Es Se Ru Nl It Ck Ch Kr 18

D100 D90/D80/D50

16mm or longer/no restrictions 16mm/1 m (3.3 ft.) or greater 24mm or longer/no restrictions 16mm/2 m (6.6 ft.) or greater 24mm or longer/no restrictions
D70-series/D60/ 24mm or longer/no restrictions D40-series The built-in flashes on the D300, D200, D90, D80, and D50 are compatible with focal lengths of 18mm or greater, and the built-in flash on the D100 is compatible with focal lengths of 20mm or greater. Vignetting occurs at a focal length of 16mm.

Detaching the hood

Hold the lens hood by the base (near the lens hood attachment index) and turn clockwise, as viewed when holding the camera with the lens facing away from you, to detach.

Be careful not to allow the CPU contacts c to become dirty or damaged. If the lens mount rubber gasket b is damaged, be sure to visit the nearest Nikon authorized dealer or service center for repair. Clean lens surfaces with a blower brush. To remove dirt and smudges, use a soft, clean cotton cloth or lens tissue moistened with ethanol (alcohol) or lens cleaner. Wipe in a circular motion from the center to the outer edge, taking care not to leave traces or touch other parts of the lens. Never use thinner or benzene to clean the lens, as this could cause damage, result in a fire, or cause health problems. NC filters are available to protect the front lens element. The lens hood 1 also helps to protect the front of the lens. When storing the lens in its flexible lens pouch, attach both the front and rear lens caps. The lens can also be stored with the lens hood 1 attached in the reverse position. When the lens is mounted on a camera, do not pick up or hold the camera and lens by the lens hood 1. When the lens will not be used for an extended period of time, store it in a cool, dry place to prevent mold. Be sure to store the lens away from direct sunlight or chemicals such as camphor or naphthalene.

Lens care

Do not get water on the lens or drop it in water as this will cause it to rust and malfunction. Reinforced plastic is used for certain parts of the lens. To avoid damage, never leave the lens in an excessively hot place.

Standard accessories

67-mm Snap-on Front Lens Cap LC-67 Rear Lens Cap LF-1 Bayonet Hood HB-39 Flexible Lens Pouch CL-1015

Optional accessories

67-mm screw-on filters

Incompatible accessories

Teleconverters (all models) Auto Ring BR-4 and all models of Auto Extension Ring PK, K Ring and Bellows focusing attachment. Attachment Ring SX-1 Other accessories may not be suitable for use with this lens. For details, refer to the documentation provided with accessories.
Jp En De Fr Es Se Ru Nl It Ck Ch Kr 19

Specifications

Type of lens G-type AF-S DX Zoom-NIKKOR lens with built-in CPU and Nikon bayonet mount (specially designed for use with Nikon digital-SLRNikon DXformatcameras) 16mm85mm f/3.55.6

Jp En De Fr Es Se Ru Nl It Ck Ch Kr 20
Focal length Maximum aperture Lens construction
Closest focus distance No. of diaphragm blades Diaphragm Aperture range
0.38 m (1.3 ft.) at all zoom settings 7 pcs. (rounded) Fully automatic f/3.5 to f/22 (at 16mm), f/5.6 to f/36 (at 85mm) Via full-aperture method
17 elements in 11 groups (3 aspherical lens and 2 ED lens elements) Picture angle 831850 Focal length scale 16, 24, 35, 50, 70, 85mm Distance Output to camera body information Zoom control Manually via separate zoom ring Focusing Nikon Internal Focusing (IF) system (utilizing an internal Silent Wave Motor); manually via separate focus ring Vibration Lens-shift method using voice coil reduction motors (VCMs) Shooting Graduated in meters and feet from distance scale 0.38 m (1.5 ft.) to infinity ( )
Exposure measurement Attachment size 67 mm (P = 0.75 mm) Approximately 72 mm (dia.) 85 mm Dimensions (extension from the cameras lensmount flange) Weight Approximately 485 g (17.1 oz) Specifications and designs are subject to change without notice or obligation on the part of the manufacturer.
Notes on using wide- or super wide-angle AF Nikkor lenses
E A person standing in front of a distant background
In the following situations, autofocus may not perform as expected when shooting with wide- or super wide-angle AF Nikkor lenses.
1. When the main subject in the focus brackets is relatively small
When a person standing in front of a distant background is positioned within the focus brackets, as shown in Fig. E, the background may be in focus, while the subject is out of focus.
2. When the main subject is a finely patterned subject or scene
When the subject is finely patterned or of low contrast, such as a field filled with flowers, as shown in Fig. F, focus may be difficult to acquire using autofocus.
F A field filled with flowers
Responses to these types of situations
(1) Focus on a different subject located at the same distance from the camera, apply focus lock, recompose, and shoot. (2) Set the cameras focus mode to manual focus and focus manually on the subject. Refer to Getting Good Results with Autofocus in the cameras Users Manual.
Jp En De Fr Es Se Ru Nl It Ck Ch Kr 21
Hinweise fr sicheren Betrieb

ACHTUNG

Keinesfalls zerlegen.
Beim Berhren der Innenteile von Kamera oder Objektiv droht Verletzungsgefahr. berlassen Sie Reparaturen unbedingt ausschlielich qualifizierten Technikern. Kommt es durch einen heftigen Sto (z.B. Fall auf den Boden) zu einem Bruch von Kamera oder Objektiv, so trennen Sie zunchst das Produkt vom Stromnetz bzw. entnehmen die Batterie(n) und geben es dann an eine autorisierte Nikon-Servicestelle zur berprfung ab.