Product Description

F6 AF 35MM SLR CAMERA BODY D2HS D-SLR CAMERA BODY D2XS D-SLR CAMERA BODY D300 D-SLR CAMERA BODY D3 D-SLR CAMERA BODY D3X FX DIGITAL SLR CAMERA BODY D700 D-SLR BODY D300S DIGITAL SLR BODY D3S FX-FORMAT D-SLR BODY D2H DIGITAL SLR CAMERA SET (accepted as a back-up body only) D2X SLR DIGITAL CAMERA (accepted as a back-up body only) D200 D-SLR CAMERA BODY (accepted as a back-up body only) D7000 DIGITAL SLR BODY (accepted as a back-up body only) 10.5MM F/2.8G ED AF DX FISHEYE-NIKKOR 10-24 MM F/3.5-4.5G ED AF-S DX NIKKOR 12-24MM F/4G IF-ED AF-S DX ZOOM-NIKKOR 14-24MM F/2.8G ED AF-S NIKKOR 14 MM F/2.8D ED AF NIKKOR 16 MM F/2.8D AF FISHEYE-NIKKOR 16-35MM F/4G ED VR AF-S NIKKOR 16-85MM F/3.5-5.6G ED VR AF-S DX NIKKOR 17-35MM F/2.8D IF-ED AF-S ZOOM-NIKKOR 17-55MM F/2.8G IF-ED AF-S DX ZOOM-NIKKOR 20 MM F/2.8D AF NIKKOR 24MM F/1.4G ED AF-S NIKKOR 24MM F/2.8D AF NIKKOR 24MM F/3.5D ED PC-E NIKKOR 24-120mm F3.5-5.6 G AF-S VR NIKKOR 24-120MM F/4G ED VR AF-S NIKKOR 24-70MM F/2.8G ED AF-S NIKKOR 24-85MM F/2.8-4D IF AF ZOOM-NIKKOR 28 MM F1.4D AF NIKKOR 28 MM F/2.8D AF NIKKOR 28-70MM F/2.8D IF-ED AF-S ZOOM-NIKKOR 28-300MM F/3.5-5.6G ED VR AF-S NIKKOR 35 MM F/1.4G AF-S NIKKOR 35MM F/1.8G AF-S DX NIKKOR 35MM F/2D AF NIKKOR 35-70MM F/2.8D AF ZOOM-NIKKOR
45MM F/2.8D ED PC-E NIKKOR 50MM F/1.4G AF-S NIKKOR 55MM F/2.8 MICRO-NIKKOR 60MM F/2.8D AF MICRO-NIKKOR 60MM F/2.8G AF-S MICRO-NIKKOR 70-200MM F/2.8G ED VR AF-S ZOOM-NIKKOR 70-200MM F/2.8G ED VR II AF-S NIKKOR 70-300MM F/4.5-5.6G AF-S VR ZOOM-NIKKOR 85MM F/1.4D IF AF NIKKOR 85MM F/1.4G AF-S NIKKOR 85MM F/1.8D AF NIKKOR 85MM F/2.8D II PC-E MICRO-NIKKOR 85MM F/3.5G VR AF-S DX MICRO NIKKOR 105MM F/2D AF DC-NIKKOR 105MM F/2.8G IF-ED AF-S VR MICRO-NIKKOR 105MM F/2.8 MICRO-NIKKOR 135MM F/2D AF DC-NIKKOR 180MM F/2.8D IF-ED AF NIKKOR 200-400MM F/4G ED VR AF-S ZOOM-NIKKOR 200-400MM F/4G ED VR II AF-S ZOOM NIKKOR 200MM F/2G IF-ED AF-S VR NIKKOR 200MM F/4D IF-ED AF MICRO-NIKKOR 200MM F/2G VR II ED AF-S NIKKOR 300MM F/2.8G VR ED AF-S 300MM F/2.8 VR II ED AF-S 300MM F/4D IF-ED AF-S NIKKOR 400MM F/2.8G ED VR AF-S NIKKOR 500MM F/4G ED VR AF-S NIKKOR 600MM F/4G ED VR AF-S NIKKOR

AF-S VR Micro-Nikkor 105mm f/2.8 IF-ED Nano Crystal Coat
Instruction Manual Bedienungsanleitung Manuel d'utilisation Manual de instrucciones Manuale di istruzioni
(P.415) (PP.1625) (S. 2635) (P. 3645) (PP. 4655) (PP. 5665) (P. 6675) (P. 7685)

Jp En De Fr Es It Ck Ch

M/A FULL

3 1.0.2

ON OFF

! " # $ % &

"

& 6

A F6 F5+DP-30 F5+DA-30 F4+DP-20 F4+DA-20

EC-B EC-E

G1 F G2

(+0.5)

Notes on Safety Operations
CAUTION Do not disassemble Touching the internal parts of the camera or lens could result in injury. Repairs should be performed only by qualified technicians. Should the camera or lens break open as the result of a fall or other accident, take the product to a Nikon-authorized service representative for inspection after unplugging the product and/or removing the battery. Turn off immediately in the event of malfunction Should you notice smoke or an unusual smell coming from the camera or lens, remove the battery immediately, taking care to avoid burns. Continued operation could result in injury. After removing or disconnecting the power source, take the equipment to a Nikon-authorized service representative for inspection. Do not use the camera or lens in the presence of flammable gas If the electronic equipment is operated in the presence of flammable gas, it could result in an explosion or a fire. Do not look at the sun through the lens or viewfinder Viewing the sun or other strong light sources through the lens or viewfinder could cause permanent visual impairment. Keep out of reach of children Particular care should be taken to prevent infants from putting the batteries or other small parts into their mouths. Observe the following precautions when handling the camera and lens Keep the camera or lens unit dry. Failure to do so could result in a fire or electric shock. Do not handle or touch the unit with wet hands. Failure to do so could result in electric shock. When the lens will not be used for a long time, attach both front and rear lens caps and store the lens away from direct sunlight. Failure to do so could result in a fire, as the lens might focus sunlight onto an object.

Nomenclature (

): Reference page Lens hood (p.22) Lens hood attachment index (p.22) Lens hood setting index (p.22) Lens hood mounting index (p.22) Focus ring (p.19) Distance scale Mounting index Lens mount rubber gasket (p.19)

9 ! " #

CPU contacts (p.18) Focus mode switch (p.19) Focusing limit switch (p.19) Vibration reduction ON/OFF switch (p.20) $ Reproduction ratio scale (p.21) % Depth-of-field indicators (p.21) & Distance index line (p.21)
Usable cameras and available functions
There may be some restrictions or limitation for available functions. Refer to your camera instruction manual for details.
Cameras D2-Series, D1-Series, D200, D100, D70-Series, D50 F6, F5, F100, F80-Series/N80-Series*, F75-Series/N75-Series*, F65-Series/N65-Series* Pronea 600i/6i*, Pronea S*2 F4-Series, F90X/ N90s*, F90-Series/ N90*, F70-Series/N70* F60-Series/ N60*, F55-Series/ N55-Series*, F50-Series/N50*, F-401x/N5005*, F-401s/ N4004s*, F-401/N4004* F-801s/N8008s*, F-801/N8008*, F-601M/N6000* F3AF, F-601/N6006*, F-501/ N2020**, Nikon MF cameras (except F-601M/N6000*) Function Exposure mode Vibration reduction Autofocus P*1 S A M

: Possible : Impossible
*Sold exclusively in the USA. **Sold exclusively in the USA and Canada. *1 P includes AUTO (General-Purpose Program) and Vari-Program System. *2 Manual (M) is not available.
If this lens is used with cameras not compatible with vibration reduction, set the vibration reduction ON/OFF switch # to [OFF]. With the Pronea 600i/6i camera, in particular, battery power may become quickly depleted if this switch is left [ON].

1. Introduction

Thank you for purchasing the AF-S VR Micro-Nikkor 105mm f/2.8G IF-ED lens. This is a high-performance Micro lens featuring special Vibration Reduction (VR2) and highspeed Internal Focusing (IF) mechanisms. It also employs a Silent (S) Wave Motor to drive the focusing mechanism.
Major features At infinity () to 1/30x reproduction ratio, pictures can be taken at shutter speeds approx. 4 stops* slower than is possible without using a VR2 lens, thus expanding the range of usable shutter speed options and making shooting without a tripod much easier. (*Under Nikon measurement conditions. The effects of vibration reduction vary depending on individual and shooting conditions.) Panning is also possible, as the lens automatically distinguishes panning from camera shake and vibration reduction works effectively. Autofocus (A) or manual (M) mode can easily be selected with the Focus mode switch. Autofocusing with manual override is provided, allowing instant change from autofocusing to manual focusing. More accurate exposure control is possible when this is mounted on a Nikon camera having 3D Matrix Metering capability, because subject distance information is transferred from the lens to the camera body. The use of an ED (extra-low dispersion) lens element ensures sharp pictures virtually free of color fringing. Also, by utilizing a 9-blade diaphragm that produces a nearly circular aperture, out-of-focus images in front of or behind the subject are rendered as pleasing blurs. The Nano Crystal Coat deposited on some of the lens elements ensures that fine, clear images can be reproduced under any shooting conditions, from the sunny outdoors to spotlighted interior scenes. The closest focusing distance possible is 0.314m (1 ft.) Important Be careful not to soil or damage the CPU contacts 9. AF-I/AF-S Teleconverters TC-14E/TC-14EII/TC-17EII/TC-20E/ TC-20EII can be used. (VR and AE functions are available. Autofocus operation is not possible.) With the TC-20E/TC-20EII attached, minimum aperture is limited to within f/90. When mounted on Nikon digital SLR (Nikon DX format) cameras, such as the D2-Series and D50, the lens picture angle becomes 1520 and its 35mm equivalent focal length is approx. 157.5mm.

If the lens mount rubber gasket 8 is damaged, be sure to visit the nearest Nikon authorized dealer or service center for repair. A total of four Wireless Remote Speedlights SB-R200 can be attached to the front of the lens.

2. Focusing

Set your cameras focus mode selector according to this chart.
Cameras D2-Series, D1-Series, D200, D100, D70-Series, D50, F6, F5, F4-Series, F100, F90X/ N90s*, F90-Series/N90*, F80-Series/N80-Series*, F75-Series/N75-Series*, F70-Series/N70*, F65-Series/N65-Series*, Pronea 600i/6i*, Pronea S F55-Series/N55-Series*, F60-Series/N60*, F50-Series/N50*, F-801s/N8008s*, F-801/N8008*, F-601M/N6000*, F-401x/N5005*, F-401s/ N4004s*, F-401/N4004* Cameras focus mode AF (C / S) Lens focus mode M/A M Autofocus with manual priority Manual focus (Focus assist is available.)
Manual focus (Focus assist is available.) Manual focus (Focus assist is available, except with the F-601M/N6000*.)
* Sold exclusively in the USA.

AF (C / S) MF

Autofocus with manual override (M/A mode) Indicator 1 Set the Focus mode switch ! to [M/A]. Note: Be sure to set the switch so that the indicator aligns with M M/A [M/A] precisely. 2 Autofocus is provided, but you can manually override the focus FULL 0.5m by operating the separate Focus ring 5 while lightly depressing the shutter release button or the AF start (AF-ON) button on the camera. 3 To cancel manual override, again lightly depress the shutter Indicator release button or the AF start button on the camera. This will FULL 0.5m return the camera to autofocus mode. To limit the range of autofocus (For AF cameras compatible with AF-S Nikkor lenses only) With AF operation, if the subject is always more than 0.5m (1.6 ft.) away, set the focusing limit switch " to [0.5m] to reduce focusing time. Note: Be sure to set the switch so that the indicator aligns with [0.5m] precisely. If the subject is sometimes 0.5 m (1.6 ft.) or closer, set it to [FULL].
3. Vibration reduction mode (VR@)
Basic concept of vibration reduction

Number of vibrations

Camera shake

Panning shots

Strength of vibration
The effects of vibration reduction When the subject is from infinity () to approx. 3m (9.8 ft.) away (at 1/30x reproduction ratio), pictures can be taken at shutter speeds approx. 4 stops* slower than is possible without using a VR2 lens. As the reproduction ratio increases from 1/30x, the effects of vibration reduction gradually decrease. (*Under Nikon measurement conditions. The effects of vibration reduction vary depending on individual and shooting conditions.) Setting the vibration reduction ON/OFF switch 1 Set the Vibration reduction ON/OFF switch # to [ON]. Note: Be sure to set the switch so that the indicator aligns with [ON] precisely. 2 Vibration is reduced when the shutter release button is lightly pressed. Because vibration is reduced in the viewfinder, auto/manual focusing and exact framing of the subject are made easier. 3 To cancel the vibration reduction mode, set the Vibration reduction ON/OFF switch # to [OFF].

Indicator

Notes on using vibration reduction mode Wait until the image in the viewfinder stops vibrating before fully depressing the shutter release button after you have lightly pressed the shutter release button. If you move the camera in a wide arc when panning, vibration in the direction of that movement is not affected. For example, if you pan the camera horizontally, only vibration in the vertical direction is reduced, making smooth pans much easier.
Due to the characteristics of the vibration reduction mechanism, the image in the viewfinder may become slightly blurred after releasing the shutter. This is not a malfunction. Do not turn the camera power OFF or remove the lens from the camera while the vibration reduction mode is in operation. (Otherwise, the lens may emit a chattering noise if the camera is shaken. This is not a malfunction. Turn the camera power ON again to correct this.) With F80-Series/N80-Series, F75-Series/N75-Series, F65-Seris/N65-Series, D200, D100, D70-Series and D50 cameras featuring a built-in flash, vibration reduction does not work while the built-in flash is recycling. When the lens is mounted on a tripod, set the vibration reduction ON/OFF switch # to [OFF]. However, set the switch to [ON] when using a tripod without securing the tripod head, or when using a monopod. With AF cameras featuring an AF start (AF-ON) button, such as D2-Series, D200, F6 and F5 models, vibration reduction will not operate even if the AF-ON button is depressed.

4. Depth of field

The depth-of-field indicators % are engraved beside the distance index line &. At close distances, however, so little is in focus that it may be better to check the depth of field table (on page 86). If your camera has a depth of field preview button or lever, use it to check the depth of field in the viewfinder.
5. Focusing at a predetermined reproduction ratio
The reproduction ratio is the relation between the size of the image recorded on film and the actual subject size. If, for example, the image on the focusing screen is onefifth the actual subject size, the reproduction ratio is 1:5. To photograph at a predetermined reproduction ratio, use the following procedure: 1 Manually turn the focus ring until the desired reproduction ratio scale $ number is aligned with the distance index line &. 2 Aim at the subject, then change your position, moving closer to or farther away from the subject, until the image in the viewfinder sharpens. To obtain the appropriate reproduction ratio for each focused distance, see the table on page 86.

6. Notes on close-up photography and duplication work
Camera shake The AF-S VR Micro-Nikkor 105mm f/2.8G IF-ED provides such exceptionally high image magnification that even the slightest movement during shooting can cause the image to blur. Be sure to mount the camera on a tripod and use a cable release or remote cord to release the shutter. Close working distance At the high reproduction ratios used in close-up shooting, the depth of field is very shallow. To ensure greater depth of field, stop down the lens, then carefully position the camera to ensure the most important surface of the subject is in the same zone of sharp focus. Use manual focus when using the close-up lens.
Close-up attachment Reproduction ratio No. 5T No. 6T No. 5T + 6T 1/6.31.22 1/3.31.44 1/2.21.65 Subject field (cm/inch) 15.0 22.51.97 2.95/ 5.9 8.90.8 1.2 8.0 12.01.67 2.5/ 3.1 4.70.7 1.0 5.24 7.861.45 2.18/ 2.1 3.10.6 0.9 Focused distance (cm/inch) 82.428.1/32.411.1 49.826.1/19.610.3 38.124.3/15.09.6

7. Setting the aperture

Set the aperture on the camera body.
8. Using bayonet hood HB-38
Attaching the hood Align the lens hood attachment index ( ) 2 on the hood (either one of the two indexes) with the lens hood mounting index 4 on the lens, and turn the lens hood 1 clockwise until it click stops to secure. Make sure that the lens hood mounting index 4 aligns with the lens hood setting index ( ) 3. If the lens hood is not correctly attached, vignetting can occur.
To facilitate attachment or removal of the hood, hold it by its base (around the lens hood attachment index) rather than its outer edge. To store the lens hood, attach it in the reverse position. Detaching the hood While holding the base of the hood (near the lens hood attachment index) rather than its outer edge, turn it counterclockwise to detach.
9. Flash pictures using cameras with a built-in flash
To prevent vignetting, do not use a lens hood 1.
10. Recommended focusing screens
Various interchangeable focusing screens are available for certain Nikon SLR cameras to suit any picture-taking situation. The ones recommended for use with this lens are:

Screen Camera F6 F5+DP-30 F5+DA-30 F4+DP-20 F4+DA-20 A B C E EC-B EC-E G1 F G2 G3 G4 J K L M P U
: Excellent focusing Acceptable focusing Slight vignetting or moir patterns appear in the viewfinder, but not on the film. : Not available. ( ): Indicates degree of exposure compensation needed (Center-Weighted metering only). For F6 cameras, compensate by selecting Other screen in Custom Setting b6: Screen comp. and setting the EV level to -2.0 to +2.0 in 0.5 EV steps. When using screens other than type B or E, Other screen must be selected even when the required compensation value is 0 (no compensation required). For F5 cameras, compensate using Custom Setting #18 on the camera body. For F4-Series cameras, compensate using the Exposure Compensation Dial for the focusing screen. See instruction manual of the camera body for more details. Blank box means not applicable. Since type M screen can be used for both macrophotography at a 1:1 magnification ratio and for photomicrography, it has different applications than other screens.
When using the B and E focusing screens in cameras other than those listed above, refer to the columns for the B and E screens.

11. Lens care

Clean the lens surfaces with a blower brush. To remove dirt and smudges, use a soft, clean cotton cloth or lens tissue moistened with ethanol (alcohol) or lens cleaner. Wipe in a circular motion from center to outer edge, taking care not to leave traces or touch other parts of the lens. Never use thinner or benzene to clean the lens as this might damage it, result in a fire, or cause health problems. To protect the front lens element, an NC filter is available. A lens hood 1 also helps protect the front of the lens. When storing the lens in its lens case, attach both front and rear caps. When the lens will not be used for a long time, store it in a cool, dry place to prevent mold. Also store the lens away from direct sunlight or chemicals such as camphor or naphthalene. Do not get water on the lens or drop it in water as this will cause it to rust and malfunction. Reinforced plastic is used for certain parts of the lens. To avoid damage, never leave the lens in an excessively hot place.

1/27.6

381 ft. 2-13/16 in. 267 ft. 5/16 in. 190 ft. 10-15/16 in. 133 ft. 9-15/16 in. 97 ft. 5-11/16 in. 67 ft. 2-5/16 in.
By using Internal Focusing (IF), the closest focusing distance of this lens is shorter than previous models at the same focal length, which utilized traditional helicoid focusing.
No reproduction in any form of this manual, in whole or in part (except for brief quotation in critical articles or reviews), may be made without written authorization from NIKON CORPORATION.

NIKON CORPORATION

FUJI BLDG., 2-3, MARUNOUCHI 3-CHOME, CHIYODA-KU, TOKYO 100-8331, JAPAN Printed in Japan TT6A01000101 (80) 7MAA2980--