JUNE/JULY 2011
20 PAGES OF GREAT POWERTOOL DEALS!
THE SPECIALIST POWERTOOL PEOPLE!

ROTARY HAMMER DRILL KIT

800w Motor SDS+ Adapter Keyed Chuck Pointed Chisel Flat Chisel
8 Piece SDS Set 6 Piece Self Cut Spade Bit Set

GBH2-26DRE

SEE IN-STORE FOR DETAILS & MORE CHANCES TO GET GREAT PRICES
INDEPENDENTLY OWNED STORES NATIONWIDE
Proud to service what we sell!
Prices valid from 1st June 2011 to 31st July 2011. All prices include GST.

CORDLESS

10.8v Li-Ion DRILL DRIVER
2 Speed VSR 0-350/0-1300rpm 10mm Keyless Chuck LED Job Light 2 x 1.3Ah Batteries Charge Time 50min

12v DRILL DRIVER

2 Speed VSR 0-400/0-1300rpm 10mm Keyless Chuck 2 x 1.3ah Batteries Charge Time 50min

Makita

DF330DWE

6271DWPE

13mm IMPACT WRENCH

SKIN ONLY

CONCRETE VIBRATOR

Concrete Vibrator

BTW251Z

Drive

Impact Wrench

10mm ANGLE DRILL

BDA350Z

BVR450Z

BCS550Z

METAL CUTTING SAW

136mm Metal Cutting Saw
18v Li-Ion HAMMER DRILL DRIVER
2-speed VSR 0-400/O-1,700rpm 13mm Keyless Chuck Twin Built-In LED Lights 2 x 3.0Ah Li-Ion Batteries Charge Time 22min
ak Rugby ita B & Bean all ie

BONUS M

10.8v Li-Ion ANGLE IMPACT DRIVER
1/4 Hex Drive Max Torque 30Nm 1.5Ah Li ion Battery Charge Time 40min

Hitachi

WH10DCL

BHP454RFE

www.powertoolcentre.com
2 Speed 0-400/1,200rpm 10mm Chuck 2 x 1.5Ah Batteries Charge Time 60min

12v Li-Ion HACKZALL

VSR 0-3000rpm 13mm Stroke LED Work Light 2 x 12v 1.5Ah Batteries

18v Li-Ion DRILL DRIVER

2 Speed VSR 0-420/0- 1800rpm 13mm Chuck 2 x 1.3Ah Batteries Charge Time 60min

PSR12-2

Milwaukee

C12HZ-22C

GSR18v-2LI
Warranty: 6 Years Warranty only when purchased from a Power Tool Centre,
2 Years on the battery and chargers
190mm SLIDE COMPOUND MITRE SAW
Maximum Cut 52 x 300mm Mitres 45 Left 57 Right Bevels 45 Left

10.8v Li-Ion KIT

Includes:10.8 V Drill Driver 10.8 V Impact Driver 10.8 V Multi Tool 2 x 10.8 V Batteries

12v Li-Ion HEATED JACKET

6 Hours Continuous Heat Per Charge Resistant to Wind and Water 3 Heat Zone Settings Includes 1.5Ah Battery and Charger Sizes M, L, XL and XXL

C12HJ-21C

BLS713Z
Warranty: 2 Years Warranty only when purchased from a Power Tool Centre,

10.8v Kit

2 Years on the battery and charger
2 Speed VSR 0-500/0-1300rpm 10mm Keyless Chuck 2 x 10.8v 1.5Ah Batteries Charge Time 40min

12v WORK SITE RADIO

Runs on all M12 Batteries (not included) Comes with AC Adaptor Weather sealed MP3 Compartment Digital AM/FM Tuner

18v Li-Ion 2 PIECE KIT

DS18DSAL 13mm Driver Drill WH18DSAL Impact Driver 2 x 1.5Ah Li Batteries Charge Time 40min

KC18DHL

DS10DFL

C12JSR-0

DRILLING

ROTARY HAMMER DRILL

620w Motor Speed 0-1500rpm 2 Mode Operation SDS+

13mm DRILL

550w Motor 2 Speeds 0-1000/1900 13mm Chuck Reversible

10mm DRILL

450w Motor Speed VSR 0-3,000rpm 10mm Chuck

DH22PG

BON US

es so ries

GBM13-2RE

4kg ROTARY HAMMER DRILL

900w Motor Speed 0-760rpm Impact Rate 0-3600bpm Bonus Keyless Chuck, Self Cut Spade Bits, 5 SDS Plus Bits

20mm IMPACT DRILL

790w Motor 2 Speed VSR 0-1000/1-3000rpm 13mm Chuck Reversible

GBH4-32DFR

DV20VB2

16mm IMPACT DRILL

650w Motor Speed VSR 50-3000rpm 13mm Chuck

18mm IMPACT DRILL

850w Motor 2 Speeds 50-850/50-2800rpm 13mm Chuck
710w Motor Speed VSR 0-3200rpm 13mm Chuck

HP1630KSP

PSB650RE

PSB850-2RE

N T R E

13mm HIGH TORQUE DRILL

825w Motor Speed 0-500rpm 13mm chuck
Warranty: 4 Years Warranty only when purchased from a Power Tool Centre
450w Motor Speed 2,600rpm 10mm Chuck

HDE13RQD

4 Pi W i t h Haw ece Big Cut tk Wood er K it

GBM10RE

16kg DEMOLITION HAMMER
1750w Motor 30mm Internal Hex Tool Holder 45 Joules 1700kg Per Hour Remove Rate
800w Motor Speed VSR 0-600rpm 13mm Chuck

BON SPA US DE

AUTOMATIC FEED SCREWDRIVER
470w Motor Accepts 25-55mm Length Screws Easy Depth Adjustment Screw Guide to Prevent Tangling

720w Motor Single Speed 550rpm 13mm Chuck Reversible 3 Handle Positions
g & Be by Ball Rede anie By mpti on

BO Ru NUS

GRINDING/CUTTING

MAKITA ANGLE GRINDERS

840w Motor Speed 11,000rpm Gear Housing Can Be Rotated to Suit Most Grinding and Cutting Applications Dust Proof Bearings

125mm ANGLE GRINDER

850w Motor Constant Electronics Speed 11,000rpm Bonus Safety Glasses Gloves & 8 Cutting/Grinding Discs
100mm 9556NB 115mm 9557NB

Makita Bosch

GWS850C KIT

125mm 9558NB

305mm COLD CUTTING METAL SAW
1750w Motor Speed 1300 rpm Maximum Cutting x 150mm x 85mm
125mm V/SPEED ANGLE GRINDER
1500w Motor Variable Speed 2800-10500/min 6 Advanced Electronic Control Functions

995 Makita

LC1230

355mm METAL CUT OFF SAW

2000w Motor A Quick-Release Vice Capable of Cutting Shaped Steel up to 130 X 130mm

230mm ANGLE GRINDER

2200w Motor Speed 6600rpm Gear Housing can be Positioned at Every 90

GA9020

CC14SF

1.6mm NIBBLER

550w Motor Minimum Cutting Radius 45mm 360 Die Rotation

1.6mm ROTARY SHEAR

380w Motor Minimum Cutting Radius 250mm Capacity Mild Steel 1.6mm Stainless Steel 1.2mm

TWIN PACK GRINDERS

Includes: GWS 22-230 235mm 2200W Grinder
GWS 7-125 125mm 720w Grinder

629 Makita

JN1601

JS1601

F005XK0215

STRAIGHT GRINDER

600w Motor Speed 12,000 - 27,000rpm Collet Constant Electronics

125mm STRAIGHT GRINDER B

750w Motor Speed 4,800 rpm Spindle 12.7mm

Tap US Spinered dle

125mm HEAVY DUTY ANGLE GRINDER
1300w Motor Speed 11,000rpm Low Profile Head

GGS27LC

665 Makita

G13SB3

2400w Motor Speed 6,600rpm 3 Position Side Handle Auto Stop Brushes Quick Release Guard

100mm ANGLE GRINDER

1100w Motor Lever guard adjust Multi port exhaust Spindle lock

AG11-100

SAWING

185mm CIRCULAR SAW

1,050w Motor 64mm Cutting Capacity Calibrated Aluminium Base Thin Kerf Blade Front Bevel Locks

MITRE SAW STAND

Compatible with most 10 and 12 Mitre Saws Collapsible & Adjustable Legs 81cm Work Height

5740NB

MSL3000

235mm CIRCULAR SAW

2000w Motor Rugged Nickel-Plated Alloy Base-Plate Max Depth of Cut 86mm at 90
254mm PROFESSIONAL MITRE SAW
1800w Motor Capacity x 89mm x 59mm Mitre Setting 47 Left and Right

M Saw itre Stan G

GCM10SD
1010w Cutting Capacity x 300mm x 212mm Double Slide Action

JIGSAW KIT

650w Motor Variable Speed 90mm Depth of Cut 4 Stage Orbital Action Blower function

T US o Blad oth e

LS0714

GST75BE

254mm COMPOUND MITRE SAW
2000w Motor Capacity x 85mm x 85mm Mitre Setting 52 L 60 R

255mm TABLE SAW

1650w Motor Max Cutting Depth 93mm Max Ripping 650mm Left & Rear Extensions Plus a Collapsible Wheeled Stand as Optional Accessories

S it r Stan e Saw d TI B

BO M NU
a S c k it a Red arf by emp t ion

BON M US

GCM10M

JIGSAW

620w Motor Variable Speed 80mm Depth of Cut 4 Stage Orbital Action Laser Guide

MULTI PURPOSE TOOL KIT

Suitable for Sanding, Polishing or Cutting of Wood, Metal, Plastics and Plaster Board Dust Extraction System Variable Speed 180w Motor
1710w Motor Heavy Duty Aluminium Base With Scale TCT Blade Bevel Cuts Up To 55

PST800PEL

PMF180E Set
710w Motor Variable Speed 135mm Depth of Cut 4 Stage Orbital Action
450w Motor Variable Speed 65mm Depth of Cut 3 Stage Orbital Action

SABRE SAW

1100w Motor 0-2700spm 28mm Stroke Length 230mm Cutting Depth in Wood Quick Blade Change

JSPE135TX

GSA1100E

C E N T

SANDING
125mm RANDOM ORBITAL SANDER
400w Motor Sanding Discs with Velcro Type Fastening 9,000-26,000 opm

TRIANGULAR SANDER

200w Motor Sanding Plate: 100 X 147mm Orbital Frequency: 26,000/min

PEX400AE

Metabo

FMS 200 Intec

75mm BELT SANDER
600w Motor No-load Belt Speed 170/250m/min Belt Size 75mm x 457mm Micro Filter System
150mm RANDOM ORBITAL SANDER
380w Motor Speed 6000rpm Accepts Self Adhesive Pads Supplied with Dust Extraction Fittings Orbit Diameter 7mm

PBS75AE

SAY150A

76mm BELT SANDER

1020w motor Variable speed dial 76 x 533mm belt
340w Motor Variable Speed 4500-12000rpm Versatile Sanding of Metal, Wood, Paint and Filler Integral Dust Extraction

GEX125ACMF

9mm BELT SANDER/LINISHER
500w Motor Variable Speed Control 300 1,700 m/min Precise Belt Adjustment That Aids Tracking and Positioning Can Be Connected to Dust Extractor

230w Motor 125mm Hook and Loop Pad System Integrated Dust Collection Bag

SV13YB

DELTA SANDER
280w Motor Variable Speed 13,000 - 19,000 opm

180mm SANDER POLISHER

1250w Motor Electronic Soft Start Constant Speed Control Variable Speed Electronic Overload Protection

SP18VA

GDA280E

ROTARY PAINT REMOVER

710w Motor Speed at rated load: 7200rpm Removes paint up to 70% faster than sanding Dust extraction system Weight: 2.6kg

HEAT GUN

2000w Electronic Control of Temperature and Airflow LED Read Out

PHG630DCE

PLANING/ROUTERING

82mm PLANER

850w Motor Depth of Cut 4mm Rebate Capacity To 24mm

WEEKENDER ROUTER

1,650w Motor 0-60mm Plunge Depth Capacity 22,000rpm Also Supplied With 1/4 Collet and Straight Bit

GHO 40-82C

WEEKENDER 1/4 LAMINATE TRIMMER
530w Motor Transparent Base Aluminium Motor Housing

PLUNGE ROUTER

1700w Motor 22,000rpm 65mm Stroke Robust Alloy Base Plate

WEEKENDER 82mm PLANER

580w Motor Planing Depth 1mm
600w Motor 1.5mm Depth of Cut 9mm Rebate Depth

GHO 15-82

Power Tool Accessories

for any application

From its widest range of Swiss made Jigsaw Blades, to its long life German manufactured SDS Plus Hammer drill bits and extensive high quality Circular saw blade range, Bosch Power Tool Accessories are designed for the serious professional. Try the unique Bosch innovations that can make your job faster and easier - Self Cut spade bits with its screw thread that makes drilling 7 times faster in hard or soft wood as well as the quick change Progressor Holesaw system with its click it on, click it off arbour technology, no tools or screwing are needed!

KRD 5/2011 RB 2329 PA

Check out the Bosch website: www.bosch-pt.co.nz

HINDIN MARQUIP

12cfm COMPRESSOR
3hp Motor Displacement 335 Litres Per Minute 50 Litre Receiver

8.1cfm COMPRESSOR

2hp Motor Displacement 228 Litres Per Minute 38 Litre Receiver

16cfm COMPRESSOR

2.7hp Motor Displacement 445 Litres Per Minute Dual Control (Pressure Switch or Continuous run) Pressure 135psi
Filt Regula er 10m h tor & ose

16RSE-DC

SPITFIRE 1250

SPITFIRE 838

GRAVITY GUN
Gravity gun & cup Drip check & strainer Fluid tip 1.4mm [also available in 2.0mm]

PLASTIC AIR GUN

W5061-K

IMPACT WRENCH KIT

W5300-1

W5200-K

10mm REVERSIBLE DRILL

6.5mm DIE GRINDER KIT

IN LINE TYRE INFLATOR
In line tyre inflator Large 50mm gauge Dual head chuck

AIR RIVETER KIT

Kit Includes Riveter With Quick Release Valve, Traction 720kg, Stroke 17mm Also has 4 Nozzle Sizes, 40 Rivets and other Accessories

SUCTION GUN

High Production Suction Gun Fully Adjustable Wide Spray Pattern Control Fluid Tip 1.8mm

W5741-K

W7002-S

W2046B

RETRACTABLE HOSES
Industrial Quality Metal Retractable Hose Reel with Rubber Hose

AIR HOSES

MARQUIP Air Hose Assemblies 10mm Blueflex PVC Hose [High Tensile, Polyester Braid and Flexible] With Connector and Coupler

POWER LEADS

Heavy Duty with Thicker Outer Sheath 15 Amp Red Cable with 10a Plug Suitable for Tradesmen Neon Indicator
S T EEL WA BR AC K L L ET

215 $ 279

15 metres DB320-2-50-Pmetres DB330-2-65-P300

45 $ 69 $ 95

EC15XHDNH 10 metres HALF1010A 20 metres HALF1020A 30 metres HALF1030A

EC20XHDNH

EC30XHDNH

DIGITAL CALIPER

DIAL INDICATOR

411-1004C

VERNIER CALIPER
150mm 105-1501 200mm 105-2001

59 $79

MAGNETIC BASE
150mm 151-1506A 200mm 151-2008A MB-BV

LASER DISTANCE MEASURER

Measurement range - 0.05 - 50m Measurement accuracy - 2.0mm over 50m Measures from front and back edge Weight - 0.18kg
Range.05-60m Accuracy 1.5mm Metric and Imperial Stores last 10 Measurements

LD060P

C E N T R E

MACHINERY

CONCRETE MIXER

1/2hp electric motor and direct drive gearbox 23RPM 140L/5cft Bowl, on stand

PEDESTAL DRILL PRESS

1hp Motor 16 Speeds 360mm Swing Wind up and Tilt Table Safety Switch Chuck 5-20mm

BENCH DRILL PRESS

DP05-20

DP31-20

305mm DISC SANDER
1hp Motor Cast Tilt Table 435 x 225mm Manual Brake Stop 74mm Dust Port

10 BANDSAW

1/2hp Motor Throat 245mm Tilt Table 0-45deg Dust Port Ballbearing Guides

9 DISC 6 BELT SANDER

1hp Motor Horizontal or Vertical Table Quick Release Belt Change Dust Extraction Ports

BAS250

305mm CONTRACTORS SAW BENCH
3hp Induction Phase Motor Tilt Arbour Rise and Fall Sliding Table Saw Cuts 90mm At 90 Or 50mm At 45 Folds for Portability And Storage Dust Extraction Port Weight: 46kg
Heavy-Duty, 140 Litre Steel Bowl 0.5hp Motor Easy-To-Attach Stand Can Be Used as a Wheel Barrow Suitable for Concrete or Plaster Perfect for Around the Home or Trade Use

CSB 315

TOOLINE

1hp DUST COLLECTOR

1hp Motor 900 CFM Capacity Twin Bag for Greater Filtration 100mm Inlet
375w Motor 12 Speed 16mm Chuck Wind Up and Tilt Table Emergency Stop Switch

Tooline

DP250B

405mm SCROLL SAW

125w Motor Stroke 20mm Variable Speed 550-1650rpm Maximum Cutting 50mm Rotary Tool for Engraving Tilt Table Worklight Air Blower

2hp DUST COLLECTOR

2hp Motor 1500 CFM Capacity Twin Bag for Greater Filtration 2 x 100mm Inlets

ROLLER STAND

Operation height: 700-1150 mm 28mm tube diameter 10.5kg

ROLLER BALL STAND

Operation height: 700-1150 mm 38mm tube diameter 10.5kg

200mm JOINTER

2hp Motor 1800 x 230mm Table Tilting Cast Iron Fence 3 Knife Cutter Head 12.7mm Rebating Capacity

RRSA RRSB

WATERBLASTER/VACUUMS

H/DUTY WATER BLASTERS

Maximum Pressure 2030psi Alloy Pump Water Flow 7.0-8.30 lpm 9m Hose Length Detergent Foam Sprayer Click And Clean Nozzle 2 Year Warranty (Domestic Use) BO PatioNUS Clea Plus Nilfisk ner

E140.2-9S XTRA

Maximum Pressure 1885 Psi Alloy Pump Water Flow 7.5 8.3 lpm 8m Hose Length Detergent Foam Sprayer Click And Clean Nozzle 2 Year Warranty (Domestic Use)

Maximum Pressure 1740psi Alloy Pump Waterflow 6.3-7.3 lpm 6m Hose Length Detergent Foam Sprayer Click&Clean Nozzle 2 Year Warranty (Domestic Use)

Nilfisk

E130.2-8

C120.5-6XTRA

WET/DRY VACUUM CLEANER
1400w Electric Motor Airflow 3600L/Min 25 Litre Container Auto On/Off Power Tool Connection Semi Automatic Filter Cleaning 32mm Accessories
WET & DRY VACUUM/DUST EXTRACTOR
1500w Motor Air Flow 3700 L/Min 25 Litre Container Auto On/Off Power Tool Connection Automatic Filter Cleaning System 5m Hose

ATTIX 30-21XC

AERO 25-21

MOBILE HOT WATER BLASTER

2800w Motor Hot /Cold to 80C Water Flow 10L/Min 3 Stainless Steel System Pump 10m Heavy Duty Hose

WET DRY VACUUM CLEANER

1400w Motor 4080L/Min 20L Plastic Container Blow Function 2 Year Warranty (Domestic Use)

NEPTUNE 1-22

MULTI 20
CORDLESS SHRUB AND EDGING SHEAR
Compact and Lightweight: For Effortless Cutting Of Bushes, Small Hedges and Lawn Edges Reliable: No Self-Discharge, No Memory Effect Practical Charge Indicator 3.6v Li-Ion Battery 110mm Cut Length

HEDGE TRIMMERS

560w Motor Double Diamond Ground Teeth

385 499

450mm Metabo

HS8745

ISIO SET

600mm Metabo

HS8765

46cc PETROL CHAINSAW

400m (16) Bar Length Automatic Chain Lubrication One-Lever Operation for Choke On/Off Primer Pump for Easy Starting Maintenance-Free Electronic Ignition
EYE PROTECTION WITH STYLE
Durable Silver Frame and Rubberised Nose Piece Available in a Range of Lens Tints AS/NZ Standards

DCS4610

RADIO EAR MUFFS
FM and AM Reception Automatic Four-Hour Shutoff Includes Input Jack for use with MP3 or Com-Radios

10amp PDL INLINE RCD

Suitable for most Power Tools & Appliances Used Around the Home Double Pole Switching Giving Added Safety Against Faulty Wiring 2 Metre Cord with Inline RCD

ELEVEX CLASS 4 EAR MUFF

Lightweight Adjustable Earmuffs with Soft Super Seal Ear Cushions Grade 4 Standard

HB-660

Whangarei
THE T IS PECIALOOL S ERT POW LE! PEOP

Auckland Henderson

Mt Maunganui Tauranga Rotorua

Servicing & Repairs

PEOPLE who are serious about power tools rely on us to provide specialist after-sales service of the highest quality (Thats something you cant ever get when you buy cheap in other places). In many cases, the tools we sell and service are the best of their kind in the world. Yet theyre like anything else - they need to be looked-after if you want to get the best out of them. Tradespeople from all walks of life bring their tools to us for servicing and repairs. Their tools are their livelihood and they know from experience that we do the job right! When your power tools arent doing what they should, bring them on in to your POWERTOOL CENTRE.

Wanganui Palmerston North

Napier Hastings

Nelson Lower Hutt
Christchurch Ashburton Timaru If youre a tradesman, a do-it-yourselfer or a hobbyist, its very likely theres a POWERTOOL CENTRE within minutes of where you are right now. Were easy to find!

WERE READY!

SOME OF OUR PREMIUM BRANDS.
THE POWERTOOL CENTRE Group of stores is proud to be associated with these leading brands of power tools and accessories that are available in the market. Our stores will only stock well established famous brands such as those above in order to ensure that you, the user, can purchase a quality product you will be proud to own.
A Proud Record of Service
THE POWERTOOL CENTRE is New Zealands longest-established network of retailers dealing exclusively in specialist power tools and accessories. Each and every one is independently owned and operated - and therein lies the secret for much of their success. The owners are very much hands-on and, boy, do they know their tools! As recognised specialists, theyre widely respected by tradespeople and serious DIYers alike. Unlike many retail chains today, Powertool Centres are not part of a franchise. Instead, they are members of a co-operative which had its beginnings back in the 1980s and since then has built an impressive reputation that extends nationwide.
Downtown Tools WHANGAREI Ph: (09) City Powertools Ltd AUCKLAND Ph: (09) Alltrades Electric Tools Ltd HENDERSON Ph: (09) Powertools & Servicing Tauranga Ltd TAURANGA Ph: (07) Machinery & Powertool Centre MT MAUGANUI Ph: (07) 574 9980
Rotorua Powertool Centre ROTORUA Ph: (07) Thomsons Powertool Centre NAPIER Ph: (06) Hector Jones Limited HASTINGS Ph: (06) Wanganuis Powertool Centre Ltd WANGANUI Ph: (06) Smith-Pilling Rewinds Ltd PALMERSTON NORTH Ph: (06) 358 3835
Lower Hutt Powertool Centre Ltd LOWER HUTT Ph: (04) Motor Rewind Specialists Ltd NELSON Ph: (03) Grossman Trade Tools CHRISTCHURCH Ph: (03) Newlands Group Limited ASHBURTON Ph: (03) ROLLESTON Ph: (03) Keemans Tools & Equipment Limited TIMARU Ph: (03) 684 6669
NOTE: While we have made every effort to ensure details of all items in this catalogue are accurate, we do not accept responsibility for any errors or omissions. Some items may be unavailable in some stores.
Visit us at www.powertoolcentre.com