. Do not keep the navigation system running with the engine stopped. Doing so may discharge the vehicle battery. When you use the navigation system, always keep the engine running. Some states/provinces may have laws limiting the use of video screens while driving. Use this system only where it is legal to do so.
. When the driver wants to operate the navigation system, first park the vehicle in a safe location and set the parking brake. Operating the system while driving can distract the driver and may result in a serious accident. Do not rely on route guidance alone. Always be sure that all driving maneuvers are legal and safe in order to avoid accidents. Do not disassemble or modify this system. If you do, it may result in accidents, fire or electrical shock.

Introduction 1-3

LASER PRODUCT
This navigation system is certified as a Class 1 laser product. The navigation system complies with DHHS Rules 21 CFR Chapter 1, Subchapter J.
. Do not disassemble or modify this system. There are no user serviceable parts in this navigation system. If maintenance, adjustments and operations other than those specified in this manual are attempted, injury due to laser radiation and exposure could occur.

2 Getting started

Control buttons and functions. 2-2 Control panel. 2-3 Opening/closing the cover of the Liquid Crystal Display (LCD) (350Z only). 2-5 How to open the cover of the LCD. 2-5 How to close the cover of the LCD. 2-6 Start-up screen. 2-7 Menu screen types and how to operate. 2-8 Menu screens and their purposes. 2-8 Using controls to adjust values, levels, etc. 2-10 Map menu screen. 2-11 Functions disabled while driving. 2-14 Operating maps. 2-15 How to view map screen. 2-15 Map screen types. 2-16 Switching map view. 2-17
Moving around within a map. Changing the scale of a map. Storing your home location/address. How to store your home. Character (letter and number) input screen. Phone number input screen. List screen. Setting a destination. Searching for a destination. Starting route guidance. Deleting a route. Setting the voice guidance. Turning voice guidance on/off. Adjusting voice guidance volume.
2-19 2-20 2-21 2-21 2-24 2-26 2-28 2-29 2-29 2-32 2-34 2-36 2-36 2-38
CONTROL BUTTONS AND FUNCTIONS

NAI0401

Getting started

5 & <TRIP>:

Push to display the vehicle information. Refer to the Owners Manual of your vehicle.

6 & <DEST>:

Push to enter a destination. Various methods for entering a destination are available. 4. Setting a destination.

7 & <ROUTE>:

7. Using the joystick, adjust your home location. 8. After adjusting the location, push <ENTER>.
9. A message is displayed and your home location is stored. 10. Push <MAP> to return to the current location map screen. The home icon is displayed on the map. INFO: You can also perform the same setting by pushing <SETTING> and selecting [Navigation]. STORING A LOCATION BY SEARCHING (page 6-2)

Getting started 2-23

CHARACTER (letter and number) INPUT SCREEN
You will have to enter alphanumeric characters when setting a destination, searching for a facility or editing the stored locations, etc.

NAV2719

NAV2720
1. Use the joystick to highlight a character on the displayed keyboard.
2. Push <ENTER>. The highlighted character is entered.

2-24 Getting started

NAV2721

NAV2722

3. Push <BACK>/<PREV>, or highlight [ ] and push <ENTER> to delete the last character entered. Push and hold <BACK>/<PREV> to delete all the characters entered. Push [ ] to enter a space.
4. After finishing the entry, highlight [OK] and push <ENTER>. INFO: You can push <BACK>/<PREV> to return to the previous screen, but only after deleting all the characters entered.

Getting started 2-25

PHONE NUMBER INPUT SCREEN
You can enter a phone number as a search method to look for a business or facility. INFO: Only the locations included in the database in the map DVD-ROM can be searched by the phone number.

NAV2723 NAV2724

1. Use the joystick to highlight a number on the displayed keyboard.
2. Push <ENTER>. The highlighted number is entered.

2-26 Getting started

NAV2725

NAV2726

3. Push <BACK>/<PREV>, or highlight [ ] and push <ENTER> to delete the last number entered. Push and hold <BACK>/<PREV> to delete all the numbers entered.

4. After finishing the entry, highlight [Map] and push <ENTER>. INFO: You can push <BACK>/<PREV> to return to the previous screen, but only after deleting all the numbers entered.

Getting started 2-27

4 & If the entire list cannot be displayed on the
screen, the system displays the total number of items in the list and the entry number of the selected item. Tilt the joystick upward or downward to scroll the list. and push <ENTER> to sort the list by shortest distance. and push <ENTER> to sort the list in the original order. the list is sorted by the shortest distance, you can confirm the selected location in the preview on the right side of the screen.
5 & Highlight 6 & Highlight 7 & When

NAV2727

LIST SCREEN
After searching for locations or facilities, a list screen is displayed. Depending on the list displayed, it can be sorted.
Items displayed in a list
1 & Highlight the preferred item from the list and
push <ENTER> to select it. If a location or facility name is not completely displayed (due to length), highlight the item to show the hidden part of the name.
2 & Distance from the current location 3 & Direction to the location or facility

2-28 Getting started

SETTING A DESTINATION SEARCHING FOR A DESTINATION
As an example, the method for setting an airport as the destination using [Points of Interest] is described here.

NAV2728

1. Push <DEST>.
2. Highlight [Points of Interest] and push <ENTER>.

Getting started 2-29

NAV2729

NAV2730

NAV2731
3. Highlight [Travel] and push <ENTER>.
4. From the category list, highlight [AIRPORT] and push <ENTER>. The character input screen is displayed.
5. Highlight [OK] and push <ENTER>. A list screen is displayed. INFO: You can enter the city name and facility name to narrow down your search.

2-30 Getting started

NAV2732

NAV2733

NAV2734
6. Highlight the preferred airport from the list and push <ENTER>.
INFO: By selecting [By Distance], you can sort the list by the shortest distance. The position of the selected location is displayed in the preview on the right side of the screen.

INFO: You can also set the orientation of the map using the following procedure. 1) Push <SETTING>. 2) Highlight [Navigation] and push <ENTER>. 3) Highlight [Heading] and push <ENTER>.

Map settings 3-17

NAV2765
3. Highlight [Birdview <ENTER>. INFO:

Angle] and push

This setting is available only when the map view is set to the BirdviewTM or Split (BirdviewTM) mode.

3-18 Map settings

INFO: You can also set the BirdviewTM angle using the following procedure. 1) Push <SETTING>. 2) Highlight [Navigation] and push <ENTER>. 3) Highlight [Heading] and push <ENTER>. 4) Highlight [BirdviewTM Angle] and push <ENTER>.

NAV2766

4. Adjust the BirdviewTM angle by moving the cursor in the direction of [ ] or [ ].
5. Push <MAP> to return to the current location map screen.

Map settings 3-19

CHANGING THE SCALE OF THE LEFT SCREEN
When the split screen is displayed, you can change the scale of the left screen.

3-20 Map settings

NAV2767

NAV2768

3. Highlight [Change Map Scale for Left] and push <ENTER>. INFO: [Change Map Scale for Left] is displayed only when the map view is in the Split (Plan View) or Split (BirdviewTM) mode.
4. Highlight [Map Scale] and push <ENTER>. Adjust the map scale by moving the cursor in the direction of [+] or []. Use the joystick to adjust the scale of the map. After finishing the setup, push <ENTER> or <BACK>/<PREV> to apply the scale setting. 5. Push <MAP> to return to the current location map screen.
INFO: You can also change the scale of the left screen using the following procedure. 1) Push <SETTING>. 2) Highlight [Navigation] and push <ENTER>. 3) Highlight [Map View] and push <ENTER>. 4) Highlight [Change Map Scale for Left] and push <ENTER>.

Map settings 3-21

MAP ICONS
Some landmarks in the surrounding area can be displayed as icons on the screen.
DISPLAYING LANDMARK ICONS
This allows you to display or hide the landmark icons by type.

3. Enter the name of the street. After finishing the entry, highlight [OK] and push <ENTER>. A list of cities is displayed.
4. Highlight the correct city of the destination from the list and push <ENTER>.

NAV2830

NAV2831

NAV2832

5. The selected destination is displayed at the center of the map. Highlight [OK] after confirming the location of the displayed destination, and push <ENTER>. The system sets the destination to the selected location and starts calculating a route.

Changing the region

1. Highlight [Region] and push <ENTER> to change the region.
Setting a destination 4-7

NAV2833

NAV2834

NAV2835

2. Highlight the preferred region and push <ENTER>. A character input screen is displayed.

Specifying a city

1. Highlight [City] and push <ENTER> to narrow down the route calculation conditions by entering the name of the city.
2. Enter the name of the city, highlight [OK] and push <ENTER>. A list screen is displayed. INFO:
Highlight [All Cities] and push <ENTER> to include all cities in the region as the route calculation condition. Highlight [Last 5 Cities] and push <ENTER> to display 5 cities recently set as destinations.

NAV2836

3. Highlight the city of the destination from the list and push <ENTER>.
Setting a destination 4-9

NAV2787

NAV2837

NAV2838

SETTING A CITY CENTER
1. Highlight [Others] and push <ENTER>.
2. H i g h l i g h t [ C i t y C e n t e r ] a n d p u s h <ENTER>. A character input screen is displayed.
INFO: Character input screen for City Center

1 & Region:

4-10 Setting a destination

3 & Symbols/A-Z:

NAV2839

NAV2840

3. Highlight [City] and push <ENTER> to narrow down the route calculation conditions by entering the name of the city. Enter the name of the city, highlight [OK] and push <ENTER>. A list screen is displayed. INFO: Highlight [Last 5 Cities] and push <ENTER> to display 5 cities recently set as destinations.

Setting a destination 4-23

NAV2777

4. Your home is displayed at the center of the map, and the system starts calculating a route.
4-24 Setting a destination

NAV2778

NAV2779
SETTING FROM ADDRESS BOOK
1. Highlight [Address Book] and push <ENTER>. A list screen is displayed.
2. Highlight the preferred location from the list and push <ENTER>.
INFO: Selecting [Sort List] displays a list of various sort functions. To use the sort functions, stored locations must be set in advance. EDITING THE STORED HOME AND LOCATION (page 6-16)
Setting a destination 4-25

NAV2781

NAV2780
1 & Sort by number: 3 & Sort by icon:
3. The selected destination is displayed at the center of the map. Highlight [OK] after confirming the location of the displayed destination, and push <ENTER>. The system sets the destination to the selected location and starts calculating a route.
The Address Book entries are displayed in ascending numerical order.

2 & Sort by name:

By selecting a particular icon, a list that contains only the Address Book entries associated with that icon is displayed.

4 & Sort by group:

The Address Book entries are displayed in alphabetic order.
By selecting a particular group (family, friends, leisure, etc.), the selected group is displayed at the top of the list.
4-26 Setting a destination

NAV2782

Setting a destination 4-27

NAV2783

NAV2784

NAV2785

SETTING A PREVIOUS DESTINATION
1. Highlight [Previous Destinations] and push <ENTER>.
2. Highlight the preferred destination from the list and push <ENTER>.
4-28 Setting a destination

NAV2786

Setting a destination 4-29

NAV2788

NAV2789
SETTING THE PREVIOUS STARTING POINT
2. Highlight [Previous Starting Point] and push <ENTER>.
3. The starting point of the route of the previous route guidance is displayed at the center of the map. Highlight [OK] after confirming the location of the displayed destination, and push <ENTER>. The system sets the destination to the selected location and starts calculating a route.

NAV2884

NAV2885

Junction guidance

While driving on a freeway, when the vehicle is approximately 1 mile (approximately 2 km) from a junction, the system automatically switches to the split screen and displays an enlarged view of the junction (3D) in the left screen. After passing the junction, the system automatically returns to the full screen mode. To switch to the full screen mode while the enlarged junction view is displayed, push <MAP>.

Turn list

Depending on the setting, the system can constantly display the split screen and show the turn list in the left screen. When approaching a guide point, the left screen automatically switches to an enlarged view of the intersection. To switch to the full screen mode, push <MAP>. ROUTE GUIDANCE SETTINGS (page 5-29)

Route guidance 5-9

ROUTE SETTING
During route guidance, you can modify the route conditions or confirm the route information. Set the appropriate route condition according to your purpose.
1. Push <ROUTE>. 2. Highlight the preferred setting item and push <ENTER>. 3. Push <MAP> to return to the current location map screen.
Always stop the vehicle in a safe location before modifying the route conditions. Modifying the route conditions while driving may cause an accident.

NAV2886

. Cancel Route Guidance/Resume Route Guidance: Allows you to cancel the current route guidance. A cancelled route can also be reactivated. If the suggested route is cancelled, [Cancel Route Guidance] changes to [Resume Route Guidance]. DELETING/REACTIVATING A ROUTE (page 5-35)
. Change/Edit Route: Allows you to change or edit the route already set. CHANGE/EDIT ROUTE (page 5-15). Route Priority: Allows you to change the route calculation conditions anywhere along the route. SETTING CONDITIONS FOR THE ROUTE CALCULATION (page 5-12)

5-10 Route guidance

. Route Information: Allows you to confirm the route by the route information or simulation. CONFIRMING A ROUTE (page 5-26). Guidance Settings: You can set various guidance information to be displayed during route guidance and activate or deactivate route and/or voice guidance. ROUTE GUIDANCE SETTINGS (page 5-29)

5-14 Route guidance

CHANGE/EDIT ROUTE
You can calculate a detour for a section of the route, edit the route or store the route.
1. Push <ROUTE>. 2. Highlight [Change/Edit Route] and push <ENTER>. 3. Highlight the preferred setting item and push <ENTER>. 4. Push <MAP> to return to the current location map screen.

NAV2889

. Detour: If you want to detour from the suggested route, you can calculate a route detouring for a specified distance. SETTING A DETOUR ROUTE (page 5-17)
. Recalculate Route: When you have deviated from the suggested route, you can recalculate a route from the current location to the destination manually or automatically. RECALCULATE ROUTE (page 5-18). Edit Route: You can edit the route and adjust the settings for route calculation. EDITING A ROUTE (page 5-19)

Route guidance 5-15

. Store Current Route: A calculated route can be stored. A maximum of 5 routes can be stored. Stored routes can be easily retrieved and set as the suggested route. STORING A ROUTE (page 6-12)

5-16 Route guidance

INFO:. When the vehicle has deviated from the suggested route, [Detour] cannot be selected. If the system cannot calculate a detour with the specified conditions, it displays the previous suggested route. If the vehicle is traveling very fast, the detour route may start from a location that the vehicle has already passed.

NAV2890

NAV2891

SETTING A DETOUR ROUTE

1. Highlight [Detour] and push <ENTER>.
2. Highlight a detour distance and push <ENTER>. After calculating the detour, the system displays the detour route on the map.

Route guidance 5-17

NAV2892

NAV2893

NAV2894

RECALCULATE ROUTE

1. Highlight [Recalculate Route] and push <ENTER>.
2. A message is displayed, and the route is recalculated.
3. Set the route conditions. After finishing the setting, highlight [Start] and push <ENTER>. PROCEDURES AFTER SETTING A DESTINATION (page 5-2)

5-18 Route guidance

NAV2895

EDITING A ROUTE

1. Highlight [Edit Route] and push <ENTER>. 2. Highlight the preferred condition and push <ENTER>. 3. Push <BACK>/<PREV> to return to the previous screen. Push <MAP> to return to the current location map screen.

. Preview: Allows you to confirm the suggested route by scrolling the map. USING ROUTE PREVIEW (page 5-27). Simulation: Allows you to simulate the suggested route. This function provides a detailed image of the route with voice guidance. CONFIRMING BY SIMULATION (page 5-28)

5-26 Route guidance

NAV2910

USING TURN LIST

1. You can confirm the information (e.g., intersections) on the route to the destination by scrolling the screen using the joystick. 2. Push <MAP> to return to the current location map screen.

NAV2911

USING ROUTE PREVIEW
1. Highlight the preferred key and push <ENTER>. : Goes forward in the direction of the destination. : Goes backward in the direction of the starting point. : Pauses the route preview.
2. Push <BACK>/<PREV> to cancel the preview and return to the current location map screen. INFO: During route preview, you can change the map scale by pushing <ZOOM IN> ( ) or <ZOOM OUT>( ).

Route guidance 5-27

NAV2912

CONFIRMING BY SIMULATION

1. Highlight the preferred key and push <ENTER>. : Pauses the simulation. : Resumes the simulation. : Ends the simulation.
2. Push <BACK>/<PREV> to cancel the simulation and return to the current location map screen. INFO: During simulation, you can change the map scale by pushing <ZOOM IN> ( ) or <ZOOM OUT> ( ).

5-28 Route guidance

ROUTE GUIDANCE SETTINGS
You can set various guidance information to be displayed during route guidance and activate or deactivate route and/or voice guidance.
1. Highlight [Guidance Settings] and push <ENTER>. 2. Highlight the preferred item and push <ENTER>. 3. Push <BACK>/<PREV> to return to the previous screen. Push <MAP> to return to the current location map screen.

NAV2913

. Guidance Screen Default: Sets the default display screen for route guidance. VISUAL GUIDANCE SETTINGS (page 5-31). Route Guidance: Activates or deactivates route guidance. Route guidance is activated when the indicator illuminates. Route information is not available when route guidance is set to OFF. Guidance Voice (350Z): Activates or deactivates voice guidance. The indicator illuminates if voice guidance is activated. SETTING THE VOICE GUIDANCE (page 2-36). Small Turn Arrow on Map: Activates or deactivates the Small Turn Arrow on Map (simplified turn indicator) displayed in the upper left corner of the map screen. The indicator illuminates if the Small

NAV2974

EDITING THE STORED TRACKING
1. Highlight the preferred stored tracked route and push <ENTER>. The [Show] indicator for the stored tracked route illuminates, and the route is displayed on the map. Tilt the joystick to the right to highlight [Edit]. INFO:
Current tracking is displayed up to 62 miles (100 km). Stored tracking is displayed up to 12 miles (20 km).
2. Highlight the preferred item and push <ENTER>. Available setting items (Current tracking). Map: Displays the tracked route up to the current location. Delete: Deletes the tracked route up to the current location.
Available setting items (Stored tracked routes). Map: Displays a stored tracked route on the map. Rename: Changes the name. CHARACTER (letter and number) INPUT SCREEN (page 2-24). Replace: Overwrites the stored tracked route to the current tracked route. Delete: Deletes the stored tracked route. OK: Applies the settings.
6-26 Storing a location/route

NAV2975

EDITING THE AVOID AREA
1. Highlight the preferred Avoid Area and push <ENTER>. 2. Highlight the preferred item and push <ENTER>. The setting method is the same as the one for the Avoid Area setting. AVOID AREA SETTINGS (page 6-7) INFO: If you select [None (Add New)], you can add an Avoid Area. AVOID AREA SETTINGS (page 6-7)

NAV2976

. Rename: Changes the name. Alter Location: Adjusts the location of the Avoid Area. Resize Area: Adjusts the range of the Avoid Area. FWY: Avoids freeways.
. Delete: Deletes the stored Avoid Area. OK: Applies the settings.
Storing a location/route 6-27

DELETING A STORED ITEM

You can delete locations and routes stored in the Address Book. Two deletion methods are available, deleting an individual item and deleting all stored items. NOTE: Deleted items cannot be restored. Before deleting an item, always make sure that the item is truly not necessary.

NAV2977 NAV2978

DELETING A STORED ITEM INDIVIDUALLY
Example: [Stored Location] is selected 2. Highlight the preferred item for deletion and push <ENTER>.
6-28 Storing a location/route

NAV2979

NAV2980

NAV2981

3. Highlight the preferred location/route for deletion and push <ENTER>.
4. Highlight [Delete] and push <ENTER>.
5. A confirmation message is displayed. Confirm the contents of the message, highlight [Yes] and push <ENTER>. The stored item is deleted from the Address Book.
Storing a location/route 6-29

NAV2982

NAV2983

NAV2984

DELETING AN INDIVIDUAL ITEM ON THE MAP
1. Align the cross pointer over the preferred stored location for deletion by moving on the map. Then push <ENTER>.

. Handle a DVD-ROM by its edges. Never touch the surface of the disc. To clean a disc, wipe the surface from the center to the outer edge using a clean, soft cloth. Do not wipe the disc using a circular motion. Do not use a conventional record cleaner, benzine, thinner or alcohol intended for industrial use. A new disc may be rough on its inner and outer edges. Remove the rough edges using the side of a pen or pencil
General system information 9-19
HOW TO HANDLE THE DISPLAY
The display is a liquid crystal display and should be handled with care.
CHARACTERISTICS OF A LIQUID CRYSTAL DISPLAY
. If the temperature inside the vehicle is especially low, the display will stay relatively dim or the movement of the images may be slow. These conditions are normal. The display will function normally when the interior of the vehicle has warmed up. Some pixels in the display are darker or brighter than others. This condition is an inherent characteristic of liquid crystal displays, and it is not a malfunction. You may also notice a remnant of the previous display image on the screen. This screen burn is inherent in displays, and it is not a malfunction. INFO: The screen may become distorted by strong magnetic fields.
MAINTENANCE OF THE DISPLAY
Never disassemble the display. Some parts utilize extremely high voltage. Touching them may result in serious personal injury.
. To clean the display, never use a rough cloth, alcohol, benzine, thinner and any kind of solvent or paper towel with a chemical cleaning agent. They will scratch or deteriorate the panel. Do not splash any liquid such as water or car fragrance on the display. Contact with liquid will cause the system to malfunction. If you need to clean the display screen, use a dry, soft cloth. If additional cleaning is necessary, use a small amount of neutral detergent with a soft cloth. Never splay the screen with water or detergent. Dampen the cloth first, then wipe the screen.
9-20 General system information

10 Troubleshooting guide

Customer assistance. 10-2 Basic operations. 10-3 Vehicle icon. 10-4
Map DVD-ROM. 10-6 Route calculation and visual guidance. 10-7 Voice guidance. 10-9

CUSTOMER ASSISTANCE

For assistance or inquiries about the NISSAN Navigation System, please contact: The NISSAN NAVIGATION HELPDESK at 1The NISSAN 1 (1-800-647-7261) for U 800-NISSAN-NAVIGATION HELPDESK at.S., 1-888-661-9995 or visit for CANADA or and at 1-800-777-0325 the NISSAN web visit the NISSAN web site at www.nissan-usa.com. site at www.zenrin.com
10-2 Troubleshooting guide

BASIC OPERATIONS

Symptom No image is displayed. Possible cause The brightness is at the lowest setting. The display is turned off. No voice guidance is available. or The volume is too high or too low. No map is displayed on the screen. The volume is not set correctly, or it is turned off. Possible solution Adjust the brightness of the display. Push and hold < display.
> (Day/Night) to turn on the
Adjust the volume of voice guidance.
Voice guidance is not provided for certain streets (roads This is not a malfunction. displayed in gray). The map DVD-ROM is not inserted, or it is inserted Insert the map DVD-ROM correctly. upside down. A screen other than map screen is displayed. The pickup lens of the DVD unit is dirty. Push <MAP>. The pickup lens can become dirty depending on how you use the vehicle. Contact a NISSAN dealer for cleaning of the pickup lens. Wait until the interior of the vehicle has warmed up. This is not a malfunction.
The screen is too dim. The movement is slow. Some pixels in the display are darker or brighter than others. Some menu items cannot be selected.
The temperature in the interior of the vehicle is low. This condition is an inherent characteristic of liquid crystal displays.
Some menu items become unavailable while the vehicle Park the vehicle in a safe location, and then operate the is driven. navigation system.
NOTE: Locations stored in the Address Book and other memory functions may be lost if the vehicles battery is disconnected or becomes discharged. If this occurs, service the vehicles battery as necessary and re-enter the information in the Address Book.

Possible cause

Possible solution
When using tire chains or replacing the tires, speed calculations based on Drive the vehicle for a while (at approximately 19 the speed sensor may be incorrect. MPH for about 30 minutes) to automatically correct the vehicle icon position. If this does not correct the vehicle icon position, contact a NISSAN dealer. The map data has a mistake or is incomplete (the vehicle icon position is Updated road information will be included in the next always misaligned in the same area). version of the map DVD-ROM.
Troubleshooting guide 10-5
Symptom The message Error appears. Possible cause The map DVD-ROM is dirty or damaged. Possible solution Check the map DVD-ROM and wipe it clean with a soft cloth, following the cautions and instructions on page 9-19. If you see any damage, replace the map DVD-ROM.
10-6 Troubleshooting guide
ROUTE CALCULATION AND VISUAL GUIDANCE
Symptom Waypoints are not included in the auto reroute calculation. Route information is not displayed. Possible cause Waypoints that you have already passed are not included in the auto reroute calculation. Route calculation has not yet been performed. You are not driving on the suggested route. Route guidance is set to off. Route information is not provided for certain types of roads (roads displayed in gray). The auto reroute calculation (or detour Route calculations took priority conditions into consideration, but the calculation) suggests the same route as same route was calculated. the one previously suggested. A waypoint cannot be added. Five waypoints are already set on the route, including ones that you have already passed. Roads near the destination cannot be calculated. The starting point and destination are too close. The starting point and destination are too far away. Possible solution If you want to go to that waypoint again, you need to edit the route. Set the destination and perform route calculation. Drive on the suggested route. Turn on route guidance. This is not a malfunction. This is not a malfunction.
A maximum of 5 waypoints can be set on the route. If you want to go to 6 or more waypoints, perform route calculations multiple times as necessary. Reset the destination to a main or ordinary road, and recalculate the route. Set a more distant destination. Divide your trip by selecting one or two intermediate destinations, and perform route calculations multiple times.

The NISSAN Navigation System gives you a choice of two map viewing styles, a normal 2-dimensional Plan View map and the 3-dimensional Birdview map. The 3-D Birdview map depicts a geographic area as seen from an elevated perspective, so you will get a better feel for the route ahead. For more information on the Birdview feature, please refer to section 11.
Route guidance is executed using voice and screen instruction. When the vehicle approaches an intersection where you need to turn, the voice guidance tells you the direction to take. The system also has the following useful features: Enlarged display of intersections. Automatic rerouting when a vehicle is off the course (when map is displayed). For more information on the Voice Guidance feature, please refer to section 10.
To make the NISSAN Navigation System easier to use, there is a short menu function in which the most commonly used items are listed. When the indicator is illuminated, the short menus (Easy Mode) are displayed. When the indicator is turned off, the default navigation systems menus (Expert Mode) are displayed. INFO: [Easy Mode] is the default setting on the initial screen at the delivery of your new vehicle.
3-4 What features are available on the Nissan navigation system?
Term [Expert Mode] is used in this manual when the Short Menus key indicator is turned off. When the amber indicator is highlighted, the system is set to [Easy Mode]. When the SETTING , DEST or ROUTE button is pressed in the [Easy Mode] screen, the Help key is displayed. For more information on the Short Menu feature, please refer to section 4.
What features are available on the Nissan navigation system? 3-5
3-6 What features are available on the Nissan navigation system?
4 How do I operate the Nissan navigation system?
Control panel button functions. 4-2 Names of the components. 4-3 How to use the joystick and the ENTER button. 4-3 How to use the PREV button. 4-4 How to use the SETTING button. 4-4 How to use the DEST button. 4-7 How to use the ROUTE button. 4-8 Map DVD-ROM location. 4-10 How to eject/insert the disc. 4-11 Setting up the start-up screen. 4-12 Confirmation of destination or waypoint. 4-12 Clearing the memory. 4-16 Setting the average speed. 4-17 About route guidance. 4-19 Notes on route guidance. 4-19 About the display error. 4-20

CONTROL PANEL BUTTON FUNCTIONS

LHA0458

4-2 How do I operate the Nissan navigation system?
GUIDE VOICE button; refer to page 10-4. Provides voice guidance from the current location. ( ZOOM OUT ) button; refer to 10. page 11-6. Alters the scale of the map display. 11. ( ZOOM IN ) button; refer to page 11-6. Alters the scale of the map display. ( EJECT ) button; refer to page 12. 4-10. Ejects the DVD.
HOW TO USE THE JOYSTICK AND THE ENTER BUTTON

LNV0003

NAMES OF THE COMPONENTS
1. ( DAY/NIGHT ) button; refer to vehicles Owners Manual. Changes display brightness. 2. PREV button; refer to page 4-4. Returns to the previous screen during setup. Finishes the setup after it is completed. 3. JOYSTICK and ENTER button; refer to the next section. Scrolls the map, selects and sets each setting item. 4. SETTING button; refer to page 4-4. Performs various adjustments and settings to help you use the navigation system more effectively.
TRIP button; refer to vehicles Owners Manual. Displays warning messages (if there are any) and displays TRIP 1 TRIP 2 FUEL ECONOMY MAINTENANCE each time you press the button. 6. DEST button; refer to page 4-7. Displays the Set a Destination menu. 7. ROUTE button; refer to page 4-8. Displays the setting menu screen at the time of route calculation. 8. MAP button; refer to page 5-36. Toggles between the intersection and the map during route guidance. Returns to the map screen from the settings screen.
The navigation system is operated by selecting keys on the screen with the joystick and pressing the joystick in to ENTER your selection. Be sure to understand the operation of the joystick before using the navigation system.
Selecting the keys on the screen
Use the joystick to select keys on the screen. The joystick can be tilted in eight directions. The selected key will be highlighted in yellow. INFO: Use the joystick to scroll the map.
How do I operate the Nissan navigation system? 4-3
Selecting the function of the highlighted key
Press the ENTER button. The display shows the screen used to carry out the function of the selected key (highlighted in yellow).
To use the navigation system more effectively, various adjustments and settings can be performed. Display key: The key also adjusts the display Brightness/Contrast/Map Background. Please refer to page 11-20. Vehicle Electronic Systems key: No settings available for the navigation system. Please refer to vehicles Owners Manual.

INV1765

HOW TO USE THE PREV BUTTON
This button has two functions. To return to the previous screen: When this button is pressed during setup, setup will be canceled, and the screen will return to the previous screen. To finish the set-up: When this button is pressed after set-up is completed, the settings will be renewed as directed, and the screen will return to the map. INFO: When the PREV button must be pressed, (for example, after the set-up is finished) instructions are given in the operation procedure of each section in this manual. If the PREV button is pressed when not finished with the set-up, the setting will be canceled, and the screen will return to the previous screen.

How do I operate the Nissan navigation system? 4-7
Please refer to Setting with the Home key on page 5-30. Street Address key: Same as in Expert Mode. Point of Interest (POI) key: Same as in Expert Mode. Country key: Same as in Expert Mode.

INV2316

INV1770
Easy Mode when the Short Menus key is selected
Help key: You can see the explanation of the navigational functions. Home key: When you set your home in the address book, a route home will be calculated by selecting this key. If the home is not set beforehand, the setting mode will appear to input the home address.
HOW TO USE THE ROUTE BUTTON
When the ROUTE button is pressed while the current location is displayed on the screen, the display shows the following keys. INFO: When no operations are executed after a few seconds, the keys will disappear automatically. Quick Stop key: Selects the destination (waypoints) from a list of 5 commonly used POI (Points of Interest). Please refer to Quick stop on page 5-41.
4-8 How do I operate the Nissan navigation system?
Where am I? key: Displays the street where the vehicle is currently located, the previous street, and the upcoming street. Please refer to Where am I on page 5-45. Cancel Guidance key: Cancels the route guidance. Please refer to Cancel guidance on page 5-45. Route Info key: Displays the route to the destination. There are three types of display methods. Complete Route key: Displays the entire route from the current location to the destination. Please refer to Displaying the complete route to the destination on page 11-10. Turn List key: Displays a list of the guidance points for the entire route to the destination on a simple map. Please refer to Displaying turn list on page 11-11.
Route Simulation key: Performs a simulation drive on the map screen by moving a vehicle icon on all the routes from the current location to the destination. Please refer to Requesting the simulation drive to the destination on page 11-13. Edit Route key:
Resets the set destination (waypoint). Please refer to Making the system guide the route with detailed options on page 5-31.

INV1771

Help key: You can see the explanation of the navigation functions. Quick Stop key: Same as in Expert Mode. Where am I? key: Same as in Expert Mode.
How do I operate the Nissan navigation system? 4-9

MAP DVD-ROM LOCATION

Cancel Guidance key: Same as in Expert Mode.
Keys that appear when the map is scrolled with the joystick
You can scroll the map display and get information about the area near your vehicle and the destination using the joystick. INFO: This function can be used when the original map disc is inserted. You can operate this with the map display on. This function cannot be used when the system is calculating the route or drawing the screen. Store Place key: You can store the location with the cross pointer. Please refer to Storing current vehicle position on page 7-4. Destination # key: You can set the position as a destination, using the cross pointer. The maximum number of destinations is six, and the last one stored will be the final destination. (# will appear on the map to denote the selected locations from 1 to 6.) Please refer to Making the system guide the route with detailed options on page 5-31.

ABOUT THE DISPLAY ERROR

The following cases may affect the display accuracy of the vehicles position or travel direction. The accuracy will return to normal if the driving conditions return to normal: When there is a similar road nearby. When the vehicle is traveling on a long stretch of straight road or series of curves with a large radius. When the vehicle is traveling in an area with a checkerboard road system.
4-20 How do I operate the Nissan navigation system?
When the vehicle is making consecutive S curves. When the vehicle is at a large Y-shaped junction. When the vehicle is on a loop bridge. When the vehicle is on a snow-covered or unpaved road. When the vehicle has made several consecutive turns or zigzags. When the vehicle is rotated on a parking lot turntable while the ignition switch is OFF. Immediately after the vehicle is driven out of a parking garage or underground parking lot. When the vehicle has different sizes of tires or tire chains. When the vehicle is moved immediately after the engine is started.
How do I operate the Nissan navigation system? 4-21
4-22 How do I operate the Nissan navigation system?
5 How do I program a destination?
Various ways to set the destination (or waypoint). 5-2 Expert mode categories. 5-2 Easy mode categories. 5-3 Setting with the Address Book key. 5-3 Setting with the Previous Dest. key. 5-5 Setting with the Street Address key. 5-7 Setting with the Intersection key. 5-14 Setting with the key. 5-21 Setting with the City key. 5-21 Setting with the Phone Number key. 5-26 Setting with the Map key. 5-28 Setting with the Country key. 5-29
Setting with the Home key (in easy mode). 5-30 Having the system guide you to the destinations. 5-31 Making the system guide the route with detailed options. 5-31 Adjusting and deleting the pre-set destination (waypoints). 5-38 To delete a destination. 5-39 All clear. 5-40 Quick stop. 5-41 Quick stop customer setting. 5-43 Where am I?. 5-45 Cancel guidance. 5-45 When the All Destinations key is selected. 5-46 When the Waypoint 1 key is selected. 5-46 When the Do not Cancel key is selected. 5-47
VARIOUS WAYS TO SET THE DESTINATION (or waypoint)
WARNING To operate the navigation system or to use the screen functions, first park the vehicle in a safe place and set the parking brake. Using the system while driving can distract the driver and may result in a serious accident.

How do I program a destination? 5-19

INV0973

INV1829

INV1830

5-20 How do I program a destination?
SETTING WITH THE City KEY
Sets the destination (waypoints) on the map screen of the area in and around the input city. 1. Press the DEST button.

INV1831

INV2337
4. The screen returns to the [DEST. SETTING (Intersection)] screen. When the city is set, the display shows the selected city next to the City key. Input the street name of your choice. Proceed to Setting with the List key on page 5-15.
The NISSAN Navigation System includes a database of Point of Interest (POI) locations such as restaurants, hotels, and gas stations. (refer to section 6.) By using this feature, you can set a Point of Interest location as a destination. For details on how to use the POI feature, please refer to section 6.
How do I program a destination? 5-21
If less than 5 suggested cities remain, they will be displayed automatically without selecting the List key.

INV2338

INV1834
2. Select the City key on the [DEST. SETTING] screen.
The List key is used when you know the names of the destination and waypoints. 1. Enter the characters of the city name which you wish to set as a destination (waypoints) using the keyboard on the [DEST. SETTING (City)] screen, then select the List key. INFO: When the List key is selected, the data of the currently-listed cities will be displayed.
5-22 How do I program a destination?

INV1835

INV1836

INV1837

2. Select the city name of your destination (waypoints) on the [DEST. SETTING (City)] screen.
3. To set the destination (waypoints), refer to Making the system guide the route with detailed options on page 5-31.
4. To slightly alter the destination. Select the Map key to display the map screen of the area around the specified destination (waypoints).
How do I program a destination? 5-23

INV1838

INV1839

INV1840

5. If necessary, operate the joystick to adjust the location of the destination (waypoints). Press the ENTER button. Select the Destination key to confirm. The [DEST. SETTING (City)] screen will be displayed. To set the destination (waypoints), refer to Making the system guide the route with detailed options on page 5-31. List is being displayed by selection of the List key.

2. The display shows the screen to select states/provinces. Input a state/province name.
5-24 How do I program a destination?

INV1841

INV1842

INV1843

4. The screen returns to the [DEST. SETTING (City)] screen. When the state/province is set, the display shows the selected state/province next to the State key. Input the city name. Please refer to Setting with the List key on the previous section.
How do I program a destination? 5-25
SETTING WITH THE Phone Number KEY
NOTE: This option only works when the destination is listed in the POI directory. Sets the destination (waypoints) on the map screen of the area and around the input phone number. 1. Press the DEST button.

INV2339 INV1845

2. Select the Phone Number [DEST. SETTING] screen.

key on the

3. Enter the ten digit phone number of the destination (waypoints) using the keyboard on the [DEST. SETTING (Phone Number)] screen. 4. If you select the OK key, the [DEST. SETTING (Phone Number)] screen will be displayed.
5-26 How do I program a destination?

INV1846

INV1847

INV1848

7. If necessary, operate the joystick to adjust the location of the destination (waypoints). Press the ENTER button. Select the Destination key to confirm. To set the destination (waypoints), refer to Making the system guide the route with detailed options on page 5-31.
How do I program a destination? 5-27

INV1849

INV2340

INV1851

INFO: When a hospital is set as a destination, a telephone number of the destination will be displayed, if available.
1. Press the DEST button. 2. Select the Map key. The map of the entire area will be displayed.
3. Operate the joystick to choose the destination (waypoints).

SETTING WITH THE Map KEY

This will enable you to zoom into the map for detail and set the desired location. This works best when you know the location geographically, or want to check the geographical surroundings on the map before setting the destinations.
5-28 How do I program a destination?
SETTING WITH THE Country KEY
When the Street Address , Intersection , City , or Point of Interest (POI) key is used to set the destination (waypoints) in other countries, they are retrieved from the areas in the country which have been set in the country category. When setting the destination (waypoints) in other countries, select a country first.

INV1852

INV2004
4. Adjust the location using the joystick, and press the ENTER button. 5. Select the Destination key. The [DEST. SETTING] screen will appear.
6. Please refer to Making the system guide the route with detailed options on page 5-31. INFO: When the OK key is selected in the [DEST. SETTING] screen, route calculation starts. If you want to add waypoints, select the Waypoint key.

The route to the destination is calculated with minimum use of freeways. Use Time Restricted Roads key: The route using time restricted roads is calculated.
5-34 How do I program a destination?
NOTE: If the Use Time Restricted Roads is not selected, the navigation system calculates a route without including carpool lanes. The auto reroute function is activated and recalculates a route including carpool lanes if both of the following conditions are met: the auto reroute function is turned ON. you deviate from suggested road and drive on a carpool lane. With this auto reroute calculation, a suggested route including carpool lanes will be displayed, and the message The route has changed to include time restricted roads. Please be sure to obey traffic regulations. will be displayed on the screen. Because the suggested route provided at this time is calculated without taking regulations and limitations of time restricted roads into consideration at all, please drive safely and follow the actual roads and regulations when driving. NOTE: When driving on a time restricted road, be sure to obey traffic regulations.
WARNING When the route is calculated with this key ON, be sure to obey traffic regulations.
Use Ferry Route key: Select this key if you prefer routes with ferry lines.

INV1862

When this key is selected and the OK key is pressed, a confirmation screen will be displayed. When the Yes key is pressed, route calculation will start. INFO: The system considers time restricted roads as whole-day restricted. When the key is set to OFF, time restricted roads will not be included in route calculation.
How do I program a destination? 5-35

INV1863

INV1864

INV1302

Route calculation and guidance
After setting all the items required, you may proceed to route calculation for guidance. After the route calculation is completed, the guidance will start automatically. INFO: When the ROUTE button is pressed on the map and the Edit Route key is selected, the [EDIT ROUTE] screen will be displayed. Select the Route calc. key.
Route calculation screen will be displayed. The suggested route will be displayed with a thick blue line. If you enter this route, the voice guide will start. INFO: If you want to cancel the route calculation, press the ENTER button. If you set a place which is not suitable as a destination, the suggested route will not be displayed. In such a case, the OK key will be displayed on the screen. Select the OK key. Reset a correct destination.

If route calculation is not possible with all the set preferences, the system may look up a route that does not exactly correspond to the preferences. When deleting the settings of destinations or waypoints, press the ROUTE button.
Enlarged intersection display
When the vehicle approaches a guide point such as an intersection, the enlarged map of the point will be displayed.
5-36 How do I program a destination?
NOTE: When the guide point is close to the guidance start point, the enlarged map may not be displayed. The guide point name may not be displayed. The position of the vehicle icon on the enlarged map may differ from the position on the current display. 1. Press the MAP or PREV button. The map screen will appear.

INV1303 INV1304

INFO: When no operation is executed with the enlarged map displayed, the map stays displayed. If route numbers are included in the map data, route numbers will be displayed on the left side of the screen. If street names are displayed in two lines, route numbers will not be displayed.
INFO: To display the enlarged map, press the MAP button or PREV button. 2. When the vehicle arrives at the neighborhood of the destination, the route guidance will end automatically. INFO: To alternate between the map and the enlarged screen, press the MAP button or PREV button. In the map screen, the distance to the next guide point and the turning direction will be displayed on the right side of the screen.
How do I program a destination? 5-37
ADJUSTING AND DELETING THE PRESET DESTINATION (waypoints)
Using the joystick, you can adjust the destination (waypoints). 1. Press the ROUTE button.

INV1868

INV1869
2. Select the Edit Route key.
3. Choose the destination (waypoints) you want to adjust on the [EDIT ROUTE] screen.
5-38 How do I program a destination?

INV1870

INV1871

INV1872

4. The map screen will be displayed for adjusting. Use the joystick to adjust the location. INFO: When you move the joystick, the Adjust key will be displayed.
5. Select the Adjust key. The new destination (waypoints) will be set.

TO DELETE A DESTINATION

1. To delete the destination (waypoint), choose the destination (waypoint) in step 3 and select the Delete key.
How do I program a destination? 5-39

ALL CLEAR

INV1873

INV1874

2. Select the Yes key. The preset destination (waypoints) will be deleted.
3. Press the Map map screen. INFO:

button to return to the

To set a new destination (waypoints), refer to Expert mode categories or Easy mode categories on page 5-2. If you reset the new destination (waypoints), the older destination (waypoints) will be deleted. If you have requested a route calculation, the previous suggested route will be deleted from memory.

6-4 How do I use the Point of Interest (POI) feature?

INV1898

INV1899

INV1900

SETTING WITH THE Category KEY
The Category key is used when you select a facility category to set the destination. 1. Select the Category key.
2. The display shows the screen to select categories. Input a category name. See listing of categories on page 6-13.
INFO: When the Last 5 Categories key is selected in step 2, the history of the previous five settings will be listed.
How do I use the Point of Interest (POI) feature? 6-5

INV1901

INV1902

INV1903

3. The display shows the category list. Select a category name. INFO: When the RESTAURANT key is selected, the screen to input the cuisine type will be displayed.
4. The screen returns to the [DEST. SETTING (POI)] screen. When the category is set, the display shows the selected category beside the Category key. Input the facility name. INFO: If you do not know the facility name you want to go to, select the List key so that the facility names in the category will be listed in alphabetical order. It may take some time to show the list, depending on categories.
5. When a facility name is input, the system retrieves the facility name according to the selected category and the input letters. Then, the display shows the screen to select a facility and Info key. Please refer to Setting with the List key on page 6-2.
6-6 How do I use the Point of Interest (POI) feature?

INV1904

INV1905

INV1906

When the Next Search key is selected, it is possible to narrow down states/provinces and cities within the selected category. To use this function, refer to Setting with the State key and Setting with the City key on pages 6-7 and 6-9.
SETTING WITH THE State KEY
How do I use the Point of Interest (POI) feature? 6-7

INV1907

INV1908

INV1909

4. The screen returns to the [DEST. SETTING (POI)] screen. When the state/province is set, the display shows the selected state/province next to the State key. Input the state/province name. INFO: If you do not know the facility name you want to go to, select the List key so that the facility names will be listed in alphabetical order.

INV1919

INV1923
When there are any nearby facilities based on the selected category, the display shows the list of facility names, directions and distance from the current vehicle location, and Info keys. Please refer to Setting with the List key on page 6-2.
6-12 How do I use the Point of Interest (POI) feature?

POI CATEGORIES

AIRPORT AMUSEMENT PARK ATM AUTO SERVICE & MAINTENANCE AUTOMOBILE CLUB BANK BORDER CROSSING BOWLING CENTER BUS STATION BUSINESS FACILITY CASINO CITY CENTER CITY HALL COLLEGE AND UNIVERSITY COMMUNITY CENTER COMMUTER RAIL STATION CONVENTION/EXHIBITION CENTER COURT HOUSE
FERRY TERMINAL GAS STATION GOLF COURSE GROCERY STORE HISTORICAL MONUMENT HOSPITAL HOTEL ICE SKATING RINK INFINITI DEALER LIBRARY MARINA MOVIE THEATER MUSEUM NIGHTLIFE NISSAN DEALER OTHERS PARK & RIDE PARK/RECREATION AREA
PARKING GARAGE PARKING LOT PERFORMING ARTS POLICE STATION RENTAL CAR AGENCY REST AREA RESTAURANT SCHOOL SHOPPING SKI RESORT SPORTS CENTER SPORTS COMPLEX TOURIST ATTRACTION TOURIST INFORMATION TRAIN STATION WINERY
How do I use the Point of Interest (POI) feature? 6-13
SETTING THE NEARBY DISPLAY ICONS
Five types of facilities can be displayed on the map using respective icons, including: ATMs Gas stations Hotels Restaurants Rest areas 1. Press the SETTING button on the control panel.

INV1920

3. Select the Nearby Display Icons key on the [NAVIGATION SETTINGS] screen. The [NEARBY DISPLAY ICONS] screen will be displayed.
6-14 How do I use the Point of Interest (POI) feature?

INV1921

INV1355
4. Select the facility you wish to display, and press the ENTER button. INFO: Every time the ENTER button is pressed, the indicator lights of the items are turned ON and OFF alternately. ON: To display nearby icons. OFF: To stop displaying nearby icons.
The icons of the selected facilities will be displayed. INFO: When the MAP button is pressed, the current location will be displayed. When the PREV button is pressed, the previous screen will reappear.
How do I use the Point of Interest (POI) feature? 6-15
6-16 How do I use the Point of Interest (POI) feature?
7 How do I use the address book feature?
Setting up and editing the address book. 7-2 Setting up the address book. 7-2 Using various categories to store locations. 7-2 Storing current vehicle position. 7-4 Storing locations of your choice. 7-5 Confirming the stored locations. 7-5

INFO: To go back to the screen displaying the current vehicle position, press the MAP button. If you press the PREV button, the screen will go back to the screen displayed in step 5. If you alter the icon of the stored location, the icon on the map will also change.
How do I use the address book feature? 7-11

INV1755

7-12 How do I use the address book feature?
ADJUSTING THE STORED ADDRESS BOOK ENTRIES
You can easily adjust the point of the stored location with the joystick. 1. Press the SETTING button.
How do I use the address book feature? 7-13

INV1942

INV1943

INV1944

4. Choose the Map key next to the stored location you want to adjust.
5. Use the joystick to set the new location.
6. Select the Adjust key. The location is updated after the update message is shown. The screen goes back to the screen displayed in step 4. INFO: To go back to the screen displaying the current vehicle position, press the MAP button.
7-14 How do I use the address book feature?
DELETING STORED LOCATIONS
You can delete the stored locations you no longer need from the system memory. 1. Press the SETTING button.
How do I use the address book feature? 7-15

INV1945

INV1946

INV1947

4. Select the location you want to delete.
5. Select the Delete key.
6. The system will ask for a confirmation. If correct, select the Yes key. The location will be deleted. After the deletion message is shown, the screen goes back to the screen displayed in step 4. INFO: To go back to the screen displaying the current vehicle position, press the MAP button.
7-16 How do I use the address book feature?
8 How do I use the avoid area feature?
Setting avoid areas. 8-2 Setting with the selected location key. 8-5 Renaming the avoid areas. 8-5
Deleting the avoid areas. 8-7 Setting with the Map key. 8-8

SETTING AVOID AREAS

Setting avoid areas will give you a route away from areas you wish to avoid. INFO: If the vehicle icon is in the avoid area, route calculation cannot be completed. 1. Press the SETTING button.

INV1948

2. Select the Navigation key. The display shows the [NAVIGATION SETTING] screen.
3. Select the Avoid Area Setting key. The display shows the [AVOID AREA SETTING] screen.
8-2 How do I use the avoid area feature?

INV1949

INV2345

INV1951

4. Select a key which is not set as an avoid area. INFO: It is possible to set up to 10 areas to avoid.
5. The display shows categories which can be used to set an avoid area. For example, use the Map key to set an avoid area. Select the Map key. INFO: For setting with other categories, please refer to Expert mode categories on page 5-2.
6. The display shows the map which centers the area to be set as an avoid area. ( ZOOM IN ) or Use the ( ZOOM OUT ) button to adjust the map reduction scale.

2. Select the Yes key. The avoid area is deleted. If the route guidance is set, the display shows the [AVOID AREA SETTING] screen. INFO: When the No key is selected, the avoid area will not be deleted, and the screen returns to the previous screen.
How do I use the avoid area feature? 8-7
3. Please refer to Making the system guide the route with detailed options on page 5-31. If the route guidance is not set, the display shows the current vehicle location.
When the stored avoid area is selected, it can be adjusted or deleted. Press the SETTING button.
2. Select the Avoid Area Setting key. The display shows the [AVOID AREA SETTING] screen.
Adjusting the stored avoid areas
1. Select the Navigation key. The display shows the [NAVIGATION SETTINGS] screen.
8-8 How do I use the avoid area feature?

INV1961

INV1962

INV1963

3. Select the Map key of stored avoid areas.
4. Use the joystick to adjust the location.
5. Press the ENTER button. The display shows the keys on the right of the screen. Select the Set key. INFO: If you want to avoid the freeway in that area, select the Avoid Freeway key to turn on the green indicator on the key. (Indicator ON: avoid, OFF: do not avoid) When altering the size of avoid area, select the Area key. The area size is increased or decreased by three scales.
How do I use the avoid area feature? 8-9

INV1964

INV1965
6. The avoid area is set, and the grid is displayed on the screen. If the route guidance is set, the display shows the [AVOID AREA SETTING] screen.
7. Please refer to Making the system guide the route with detailed options on page 5-31. If the route guidance is not set, the display shows the current vehicle location.
Deleting the stored avoid areas
1. Select the Delete key on the screen shown in step 5 under Adjusting the stored avoid areas.
8-10 How do I use the avoid area feature?

INV1966

2. Select the Yes key when asked if you are sure you want to delete the avoid area. The avoid area is deleted. If the route guidance is set, the display shows the [AVOID AREA SETTING] screen. INFO: When the No key is selected, the avoid area will not be deleted, and the screen returns to the previous one.
How do I use the avoid area feature? 8-11
8-12 How do I use the avoid area feature?
9 How do I use the automatic rerouting feature?
Rerouting when the vehicle is off the suggested route. 9-2 Automatic rerouting. 9-2 Detouring from the route temporarily. 9-3

How do I use the voice guidance feature? 10-3
REQUESTING CURRENT VOICE INFORMATION
NOTES ON THE VOICE GUIDANCE
The voice guidance in this system should be regarded as a supplementary function. When driving your vehicle, check the route on the map display and follow the actual road and all traffic regulations. The voice guidance is activated only for junctions with certain conditions. In some cases you may need to turn, even if there is no voice guidance. The content of the voice guidance may vary, depending on the direction of the turn and the type of junction with other roads. When the amber indicator on the Guide Volume key is not illuminated, the voice guidance is not available. The voice guidance will start when the vehicle enters the suggested route. Before entering the route, refer to the map display for the direction. When the vehicle approaches a waypoint, the voice will say, You have arrived at waypoint 1 (2, 3, 4.). The guidance will switch to the next route section. While the voice guidance is not available, please refer to the map display for the direction. In some cases, the voice guidance ends before arrival at the destination. In such cases, drive the vehicle by referring to the destination icon displayed on the map screen. When the system can judge on which side the destination (waypoint) is located, the voice guidance will say on the right (left) after announcing the arrival at the destination. Voice guidance may not operate as specified or may not operate at all due to the angle of roads at intersection entrances and exits.

INV1405

This is available during route guidance, from the time after the route calculation is completed until the vehicle arrives at the destination. Press the GUIDE VOICE button. The current condition will be announced. INFO: If you press the GUIDE VOICE button when you are off the suggested route and when the automatic reroute function is off, the voice will announce: Proceed to the highlighted route. If you press the GUIDE VOICE button when you are going in the wrong direction, the voice will announce: Please make a legal Uturn if possible.
The route guidance will be activated at various times depending on the situation. When the vehicle is off the suggested route, route guidance is not available. The system will not inform you of this; please refer to the map display and request rerouting. At freeway junctions, the road numbers and directions may not accurately correspond with the voice guidance. At freeway exits, the street names may not accurately correspond with the voice guidance. The displayed street names may sometimes differ from the actual names or UNKNOWN STREET NAME may be displayed. Please refer to Automatic re-routing on 9-2.