WFW0002

Your new NISSAN is the result of our dedication to produce the finest in safe, reliable and economical transportation. Your vehicle is the product of a successful worldwide company that manufactures cars and trucks in over 17 countries and distributes them in 170 nations. NISSAN vehicles are designed and manufactured by NISSAN Motor Co., Ltd. which was founded in Tokyo, Japan in 1933, and NISSAN affiliates worldwide, collectively growing to become the fifth largest automaker in the world. In addition to cars and trucks, NISSAN also makes forklift trucks, marine engines, boats and other diversified products. NISSAN has made a substantial and growing investment in North America. NISSANs commitment is over $6 billion dollars in capital investments in facilities across the continent. Some of the facilities include the NISSAN Manufacturing facilities in Canton, Mississippi and in Smyrna, Tennessee, vehicle
styling design at NISSAN Design America, Inc. in San Diego, California, and engineering at NISSAN Technical Center North America in Farmington Hills, Michigan. Additionally, NISSAN employs more than 21,000 people throughout the United States, Canada, and Mexico. An additional 60,000 people work for the 1,250 NISSAN and INFINITI dealers across North America. NISSAN is also a substantial contributor to the Canadian economy. NISSAN Canada Inc., its suppliers and over 150 dealers employ approximately 4,500 people. These include company employees and the staffs of NISSAN dealers all across Canada. In addition, many Canadians work for companies that supply NISSAN and NISSAN dealers with materials and services ranging from the operation of port facilities and transportation services, to the supply of lubricants, parts and accessories.
NISSAN CUSTOMER CARE PROGRAM
NISSAN CARES. Both NISSAN and your NISSAN dealer are dedicated to serving all your automotive needs. Your satisfaction with your vehicle and your NISSAN dealer are our primary concerns. Your NISSAN dealer is always available to assist you with all your automobile sales and service needs.

Remember that a child restraint left in a closed vehicle can become very hot. Check the seating surface and buckles before placing your child in the child restraint.

LRS0347

CHILD RESTRAINT INSTALLATION ON 2ND ROW CAPTAINS CHAIRS
The three-point seat belt in your vehicle is equipped with an automatic locking mode retractor which must be used when installing a child restraint. Failure to use the retractors locking mode will result in the child restraint not being properly secured. The restraint could tip over or otherwise be unsecured and cause injury to the child in a sudden stop or collision.

Front Facing step 1

Position the child restraint on the seat. Adjust the head restraint to its highest position. Always follow the restraint manufacturers instructions. The back of the child restraint should be secured against the vehicle seat back. If necessary, adjust or remove the head restraint to obtain the correct child restraint fit. See Head restraint adjustment earlier in this section. If the head restraint is removed, store it in a secure place. Be sure to install the head restraint when the child restraint is removed. If the seating position does not have an adjustable head restraint and it is interfering with the proper child restraint fit, try another seating position or a different child restraint.

Front facing

When you install a child restraint on the 2nd row captains chairs, follow these steps:
SafetySeats, seat belts and supplemental restraint system 1-27
Front Facing step 2 Route the seat belt tongue through the child restraint and insert it into the buckle until you hear and feel the latch engage. Be sure to follow the child restraint manufacturers instructions for belt routing.
Front Facing step 3 Pull on the shoulder belt until all of the belt is fully extended. At this time, the seat belt retractor is in the automatic locking mode (child restraint mode). It reverts back to emergency locking mode when the seat belt is fully retracted.
Front Facing step 4 Allow the seat belt to retract. Pull up on the shoulder belt to remove any slack in the belt.
1-28 SafetySeats, seat belts and supplemental restraint system
6. Check that the retractor is in the automatic locking mode by trying to pull more seat belt out of the retractor. If you cannot pull any more belt webbing out of the retractor, the retractor is in the automatic locking mode. 7. Check to make sure that the child restraint is properly secured prior to each use. If the belt is not locked, repeat steps 3 through 6. After the child restraint is removed and the seat belt is fully retracted, the automatic locking mode (child restraint mode) is canceled.

CHILD RESTRAINT INSTALLATION ON 2ND ROW BENCH SEATS (if so equipped)
SafetySeats, seat belts and supplemental restraint system 1-31

LRS0376

LRS0377
Front facing (outboard) step 1
Front facing (center) step 1
When you install a child restraint on the 2nd row bench seat, follow these steps:
1-32 SafetySeats, seat belts and supplemental restraint system
SafetySeats, seat belts and supplemental restraint system 1-33

WRSLRS0373

Front Facing step 5 Before placing the child in the child restraint, use force to push the child restraint from side to side, and tug it forward to make sure that it is securely held in place. It should not move more than 1 inch (25mm). If it does move more than 1 inch (25 mm), pull again on the shoulder belt to further tighten the child restraint. If unable to properly secure the restraint move the restraint to another rear seating position and try again , or try a different child restraint. Not all child restraints fit in all types of vehicles.
Rear facing (outboard) step 1
1-34 SafetySeats, seat belts and supplemental restraint system

LRS0375

Rear facing (center) step 1
SafetySeats, seat belts and supplemental restraint system 1-35

WRSWRS

Rear Facing step 5 Before placing the child in the child restraint, use force to push the child restraint from side to side, and tug it forward to make sure that it is securely held in place. It should not move more than 1 inch (25mm). If it does move more than 1 inch (25 mm), pull again on the shoulder belt to further tighten the child restraint. If unable to properly secure the restraint move the restraint to another rear seating position and try again , or try a different child restraint. Not all child restraints fit in all types of vehicles.
CHILD RESTRAINT INSTALLATION ON 3RD ROW BENCH SEAT
1-36 SafetySeats, seat belts and supplemental restraint system
When installing a child restraint system in the rear center position, both the center seat belt connector tongue and buckle tongue must be secured. See Attaching rear center seat belt earlier in this section.

SUPPLEMENTAL AIR BAG WARNING LIGHT
The supplemental air bag warning light, displaying in the instrument panel, monitors the circuits of the supplemental front air bag, supplemental side-impact air bag and curtain side-impact and rollover air bag and pretensioner seat belt systems. The circuits monitored by the supplemental air bag warning light are the diagnosis sensor unit, crash zone sensor, satellite sensors, rollover sensor, front air bag modules, side air bag modules, curtain air bag modules, pre-tensioner seat belts and all related wiring.
The supplemental air bag warning light does not come on at all. Under these conditions, the supplemental front air bag, supplemental side air bags and curtain air bag or pre-tensioner seat belt systems may not operate properly. It must be checked and repaired. Take your vehicle to the nearest NISSAN dealer.
SafetySeats, seat belts and supplemental restraint system 1-71
Once a supplemental front air bag, supplemental side air bag or curtain air bag has inflated, the air bag module will not function again and must be replaced. Additionally, if any of the supplemental front air bags inflate, the activated pre-tensioner seat belts must also be replaced. The air bag module and pre-tensioner seat belt system should be replaced by a NISSAN dealer. The air bag module and pre-tensioner seat belt system cannot be repaired. The supplemental front air bag, side air bag and curtain air bag systems, and the pre-tensioner seat belt system should be inspected by a NISSAN dealer if there is any damage to the front end or side portion of the vehicle. If you need to dispose of the supplemental air bag, pre-tensioner seat belt system or scrap the vehicle, contact a NISSAN dealer. Correct supplemental air bag and pre-tensioner seat belt system disposal procedures are set forth in the appropriate NISSAN Service Manual. Incorrect disposal procedures could cause personal injury.
1-72 SafetySeats, seat belts and supplemental restraint system
SafetySeats, seat belts and supplemental restraint system 1-73
2 Instruments and controls
Instrument panel. 2-2 Meters and gauges. 2-3 Speedometer and odometer. 2-4 Tachometer. 2-5 Engine coolant temperature gauge. 2-5 Fuel gauge. 2-6 Engine oil pressure gauge. 2-6 Voltmeter. 2-7 Automatic transmission fluid temperature gauge (if so equipped). 2-7 Compass and outside temperature display. 2-8 Outside temperature display. 2-8 Compass display. 2-9 Warning/indicator lights and audible reminders. 2-12 Checking bulbs. 2-12 Warning lights. 2-13 Indicator lights. 2-17 Audible reminders. 2-19 Security systems. 2-20 Vehicle security system. 2-20 Nissan vehicle immobilizer system (NVIS). 2-21 Windshield wiper and washer switch. 2-22 Switch operation. 2-22

Vehicle security system activation
The vehicle security system will give the following alarm: The headlights blink and the horn sounds intermittently. The alarm automatically turns off after approximately 50 seconds. However, the alarm reactivates if the vehicle is tampered with again. The alarm can be shut off by unlocking a door with the key, or by pressing the button on the keyfob. The alarm is activated by: opening a door without using the key or keyfob (even if the door is unlocked by using the inside lock knob or the power door lock switch).
How to stop an activated alarm
The alarm stops only by unlocking a door with the key, or by pressing the button on the keyfob.
Instruments and controls 2-21
WINDSHIELD WIPER AND WASHER SWITCH
NOTE: You can turn on or turn off the driving speed dependent intermittent wiper function for vehicles with navigation system. Refer to Vehicle electronic systems in the Display screen, heater, air conditioner and audio systems section later in this manual.
Low continuous low speed operation High continuous high speed operation
4 Push the lever up to have one sweep operation of the wiper. LIC0474 WIC0843

Security indicator light

The security indicator light blinks whenever the ignition switch is in the LOCK, OFF or ACC position. This function indicates the NISSAN Vehicle Immobilizer System (NVIS) is operational. If the NVIS is malfunctioning, the light will remain on while the ignition key is in the ON position. If the light still remains on and/or the engine will not start, see a NISSAN dealer for NVIS service as soon as possible. Please bring all NVIS keys that you have when visiting your NISSAN dealer for service.

SWITCH OPERATION

The windshield wiper and washer operates when the ignition switch is in the ON position. Push the lever down to operate the wiper at the following speed:
5 Pull the lever toward you to operate the washer. The wiper will also operate several times.
In freezing temperatures the washer solution may freeze on the windshield and obscure your vision which may lead to an accident. Warm the windshield with the defroster before you wash the windshield.
Intermittent intermittent operation can be A adjusted by turning the knob toward B (Slower) or (Faster). Also, the intermittent operation speed varies in accordance with the vehicle speed. (For example, when the vehicle speed is high, the intermittent operation speed will be faster.)

Battery saver system

If the ignition switch is turned OFF while the headlight switch is in the or position, the headlights will turn off after 5 minutes.
2-26 Instruments and controls
When the daytime running light system is active, tail lights on your vehicle are not on. It is necessary at dusk to turn on your headlights. Failure to do so could cause an accident injuring yourself and others.

LIC0392

LIC0563
INSTRUMENT BRIGHTNESS CONTROL
The instrument brightness control operates when the headlight control switch is in the , or AUTO position (with autolights activated). Turn the control to adjust the brightness of instrument panel lights when driving at night.
TURN SIGNAL SWITCH Turn signal
Move the lever up or down to signal the turning direction. When the turn is completed, the turn signals cancel automatically. To signal a lane change, move the lever up or down to the point where the indicator light begins to flash, but the lever does not latch.

Lane change signal

Instruments and controls 2-27
HAZARD WARNING FLASHER SWITCH
Turn signals do not work when the hazard warning flasher lights are on. The flashers will operate with the ignition switch in any position. Some state laws may prohibit the use of the hazard warning flasher switch while driving.

LIC0564

LIC0394
FOG LIGHT SWITCH (if so equipped)
To turn the fog lights on, turn the headlight switch to the position, then turn the fog light switch to the position. To turn them off, turn the fog light switch to the OFF position. The headlights must be on and the low beams selected for the fog lights to operate. The fog lights automatically turn off when the high beam headlights are selected.
Push the switch on to warn other drivers when you must stop or park under emergency conditions. All turn signal lights flash.
If stopping for an emergency, be sure to move the vehicle well off the road. Do not use the hazard warning flashers while moving on the highway unless unusual circumstances force you to drive so slowly that your vehicle might become a hazard to other traffic.
2-28 Instruments and controls

1. 2. 3. 4.

Two master keys (black) with transponder chip and chrome NISSAN brand symbol on one side Valet key (black) with transponder chip Key number plate Transponder chip
A key number plate is supplied with your keys. Record the key number and keep it in a safe place (such as your wallet), not in the vehicle. If you lose your keys, see a NISSAN dealer for duplicates by using the key number. NISSAN does not record key numbers so it is very important to keep track of your key number plate.
3-2 Pre-driving checks and adjustments
DOORS Opening and closing windows
The drivers door key operation allows you to open and close windows equipped with automatic operation at the same time. To open the windows, turn the drivers door key toward the rear of the vehicle for longer than 1 second after the door is unlocked. To close the windows, turn the drivers door key to the front of the vehicle for longer than 1 second after the door is locked. Windows stop when the key cylinder is released.

LPD0240

Always have the doors locked while driving. Along with the use of seat belts, this provides greater safety in the event of an accident by helping to prevent persons from being thrown from the vehicle. This also helps keep children and others from unintentionally opening the doors, and will help keep out intruders. Before opening any door, always look for and avoid oncoming traffic. Do not leave children unattended inside the vehicle. They could unknowingly activate switches or controls. Unattended children could become involved in serious accidents. Drivers side

LOCKING WITH KEY

The power door lock system allows you to lock or unlock all doors at the same time.
1 Turning the key toward the front of the vehicle locks all doors. 2 Turning the key one time toward the rear of the vehicle unlocks that door. From that position, 3 returning the key to neutral (where the key can only be removed and inserted) and turning it toward the rear again within 5 seconds unlocks 4 all doors.
Pre-driving checks and adjustments 3-3

Lockout protection

When the power door lock switch (drivers or front passengers side) is moved to the lock position with the key in the ignition and any door open, all doors will lock and unlock automatically. This helps to prevent the keys from being accidently locked inside the vehicle.

LPD0241

WPD0317

Inside lock

Door lock switch
LOCKING WITH INSIDE LOCK KNOB
To lock the door without the key, move the inside 1 lock knob to the lock position , then close the door. To unlock the door without the key, move the 2 inside lock knob to the unlock position.

1 Put the fuel filler cap on the cap holder while refueling.
3-14 Pre-driving checks and adjustments
Gasoline is extremely flammable and highly explosive under certain conditions. You could be burned or seriously injured if it is misused or mishandled. Always stop the engine and do not smoke or allow open flames or sparks near the vehicle when refueling. Fuel may be under pressure. Turn the cap a third of a turn, and wait for any hissing sound to stop to prevent fuel from spraying out and possibly causing personal injury. Then remove the cap. Do not attempt to top off the fuel tank after the fuel pump nozzle shuts off automatically. Continued refueling may cause fuel overflow, resulting in fuel spray and possibly a fire. Use only an original equipment type fuel filler cap as a replacement. It has a built-in safety valve needed for proper operation of the fuel system and emission control system. An incorrect cap can result in a serious malfunction and possible injury. It could also cause the malfunction indicator lamp to come on. Never pour fuel into the throttle body to attempt to start your vehicle.
Do not fill a portable fuel container in the vehicle or trailer. Static electricity can cause an explosion of flammable liquid, vapor or gas in any vehicle or trailer. To reduce the risk of serious injury or death when filling portable fuel containers: Always place the container on the ground when filling. Do not use electronic devices when filling. Keep the pump nozzle in contact with the container while you are filling it. Use only approved portable fuel containers for flammable liquid.
Tighten until the fuel filler cap clicks. Failure to tighten the fuel filler cap malproperly may cause the function indicator lamp (MIL) to illuminate. If the lamp illuminates because the fuel filler cap is loose or missing, tighten or install the cap and continue to drive the vehicle. The lamp should turn off after a lamp few driving trips. If the does not turn off after a few driving trips, have the vehicle inspected by a NISSAN dealer. For additional information, see the Malfunction indicator lamp (MIL) in the Instruments and Controls section earlier in this manual.
If fuel is spilled on the vehicle body, flush it away with water to avoid paint damage.

Display screen, heater, air conditioner and audio systems 4-9

LHA0262

LHA0270

LHA0271

System settings
Language/Unit The LANGUAGE/UNIT screen will appear when selecting the Language/Unit key and pushing the ENTER button. Language: English or French Unit: US mile, F, MPG Metric km, C, L/100 km You can select the language and unit using the joystick and ENTER button.
Clock Adjusting the time: Select the Hours or Minutes key and move the joystick to the right or left to adjust the time. The time will change step by step. After completion of the setting, press the PREV button.
Setting daylight savings time: Use the Daylight Saving Time key to adjust the clock to daylight savings time. ON: The displayed time advances by 1 hour. OFF: The current time is displayed.
4-10 Display screen, heater, air conditioner and audio systems

LHA0272

LHA0273

LHA0274

Adjusting the time to the GPS: Select the Auto Adjust key. The time will be reset to the GPS time.
Selecting the time zone: 1. Select the Select Time Zone key. The [TIME ZONE] screen will appear.
2. Select one of the following zones depending on the current location. Pacific zone Mountain zone Central zone Eastern zone Atlantic zone Newfoundland zone After selection, the [CLOCK SETTINGS] screen will appear.
Display screen, heater, air conditioner and audio systems 4-11
REARVIEW MONITOR (if so equipped)
The GPS time (manual time) corresponding to the selected zone will be displayed. Pacific zone has been set as the initial (default) setting. Beep setting With this option ON, a beep will sound if any audio button is pushed. When the selector lever is shifted into the R (Reverse) position, the monitor display shows view to the rear of the vehicle. When washing the vehicle with highpressure water, be sure not to spray it around the camera. Otherwise, water may enter the camera unit causing water condensation on the lens, a malfunction, fire or an electric shock. Do not strike the camera. It is a precision instrument. Otherwise, it may malfunction or cause damage resulting in a fire or an electric shock.
The system is designed as an aid to the driver in detecting large stationary objects to help avoid damaging the vehicle. The system will not detect small objects below the bumper, and may not detect objects close to the bumper or on the ground. The rear view camera is a convenience but it is not a substitute for proper backing. Always turn and check that it is safe to do so before backing up. Always back up slowly. Objects viewed in the rear view monitor differ from actual distance because a wide-angle lens is used. Objects in the rear view monitor will appear visually opposite than when viewed in the rear view and outside mirrors. Make sure that the back door is securely closed when backing up. Do not put anything on the rear view camera. The rear view camera is installed beside the license plate light.

1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11.
Driver temperature control dial Front window defroster button Fan speed control and system OFF dial AUTO button Passenger temperature control dial A/C ON/OFF button Rear control and fan speed dial Rear window defroster button MODE button Air recirculation button Rear temperature control dial
The air conditioner cooling function operates only when the engine is running. Do not leave children or adults who would normally require the assistance of others alone in your vehicle. Pets should also not be left alone. They could accidentally injure themselves or others through inadvertent operation of the vehicle. Also, on hot, sunny days, temperatures in a closed vehicle could quickly become high enough to cause severe or possibly fatal injuries to people or animals.
4-24 Display screen, heater, air conditioner and audio systems
The temperature of the passenger compartment will be maintained automatically. Air flow distribution, fan speed and A/C on/off are also controlled automatically.
side air to be drawn into the passenger compartment to further improve the defogging performance.

Air flow control

Pushing the MODE button manually controls air flow and selects the air outlet to:
Dehumidified defrosting or defogging
1. Turn the defroster control dial to the left. The display will show the defrost icon. 2. Turn the temperature dial to the left or right to set the desired temperature. To quickly remove ice from the outside of the windows, push the manual fan control button and set to the maximum position. As soon as possible after the windshield is clean, push the AUTO button to return to the auto mode. When the DEF control is activated, the air conditioner will automatically be turned on at outside temperatures above 36F (2C). If in defrost mode for more than one minute, the air conditioning system will continue to operate until the fan control is turned OFF or the vehicle is shut off, even if the air flow mode control button is used to select a position other than the position. This dehumidifies the air which helps defog the windshield. The air recirculate mode automatically turns off, allowing out-
MANUAL OPERATION Fan speed control
Push the fan control button to manually control the fan speed. up or down
Push the AUTO button to return to automatic control of the fan speed.

Air recirculation

The mode automatically turns off, allowing outside air to be drawn into the passenger compartment to prevent fogging. Push the air recirculation button to recirculate interior air inside the vehicle. Push the AUTO button to return to automatic mode. The air recirculation button will not be activated when the air conditioner is in DEF, floor, or floor/defrost mode.

AM RADIO RECEPTION

AM signals, because of their low frequency, can bend around objects and skip along the ground. In addition, the signals can be bounced off the ionosphere and bent back to earth. Because of these characteristics, AM signals are also subject to interference as they travel from transmitter to receiver. Fading: Occurs while the vehicle is passing through freeway underpasses or in areas with many tall buildings. It can also occur for several seconds during ionospheric turbulence even in areas where no obstacles exist. Static: Caused by thunderstorms, electrical power lines, electric signs and even traffic lights.

Radio reception

Your NISSAN radio system is equipped with state-of-the-art electronic circuits to enhance radio reception. These circuits are designed to extend reception range, and to enhance the quality of that reception. However there are some general characteristics of both FM and AM radio signals that can affect radio reception quality in a moving vehicle, even when the finest equipment is used. These characteristics are completely normal in a given reception area, and do not indicate any malfunction in your NISSAN radio system.
SATELLITE RADIO RECEPTION (if so equipped)
When the satellite radio is first installed or the battery has been replaced, the satellite radio may not work properly. This is not a malfunction. Wait more than 10 minutes with satellite radio ON and
4-28 Display screen, heater, air conditioner and audio systems
the vehicle outside of any metal or large building for satellite radio to receive all of the necessary data. No satellite radio reception is available and NO SAT is displayed when the SAT band option is selected unless optional satellite receiver and antenna are installed and an XM or SIRIUS satellite radio service subscription is active. Satellite radio performance may be affected if cargo carried on the roof blocks the satellite radio signal. If possible, do not put cargo over the satellite antenna.
During cold weather or rainy days, the player may malfunction due to the humidity. If this occurs, remove the CD and dehumidify or ventilate the player completely. The player may skip while driving on rough roads. The CD player sometimes cannot function when the compartment temperature is extremely high. Decrease the temperature before use. Do not expose the CD to direct sunlight. CDs that are in poor condition or are dirty, scratched or covered with fingerprints may not work properly. The following CDs may not work properly: Copy control compact discs (CCCD) Recordable compact discs (CD-R) Rewritable compact discs (CD-RW)

During the first 1,200 miles (2,000 km), follow these recommendations to obtain maximum engine performance and ensure the future reliability and economy of your new vehicle. Failure to follow these recommendations may result in shortened engine life and reduced engine performance. Avoid driving for long periods at constant speed, either fast or slow, and do not run the engine over 4,000 rpm. Do not accelerate at full throttle in any gear. Avoid quick starts. Avoid hard braking as much as possible. Do not tow a trailer for the first 500 miles (800 km). Your engine, axle or other parts could be damaged.
5-16 Starting and driving
When cruising at highway speeds, it is more economical to use the air conditioner and leave the windows closed to reduce drag. Use 4H or 4L position only when necessary. Four-wheel drive operation lowers fuel economy.
USING FOUR WHEEL DRIVE TRANSFER CASE SHIFTING PROCEDURES
All mode 4WD system provides 4 positions (AUTO, 2WD, 4H and 4LO), so you can select the desired drive mode according to the driving conditions. 2WD or 4WD shift procedure:
Do not drive the vehicle in the 4H or 4LO position on dry hard surface roads. Driving on dry, hard surfaces in 4H or 4LO may cause unnecessary noise, tire wear and increased fuel consumption. If the 4WD warning light turns on when you are driving on dry hard surface roads: in the 4H position, shift the 4WD shift switch to 2WD. in the 4LO position, stop the vehicle, move the automatic transmission shift selector lever to the N position with the brake pedal depressed, and shift the 4WD shift switch to 2WD. If the warning light is still on after the above operation, have your vehicle checked by a NISSAN dealer as soon as possible. The transfer case may be damaged if you continue driving with the warning light blinking rapidly.
Starting and driving 5-17
Indicator Light 4WD Shift Switch Position Wheels Driven 4WD shift Transfer 4LO position Use Conditions 4WD Shift Procedure
Rear wheels or 4 wheels Rear wheels
For driving on paved or slippery roads

2WD 4 wheels 4H Neutral

For driving on dry, paved roads (Economy drive) or state dynamometer I/M testing
Move the 4WD switch. 2WD <> AUTO <> 4H 4WD shift indicator light will indicate transfer shift position engaged. IT IS NOT NECESSARY TO MOVE THE AUTOMATIC TRANSMISSION SELECT LEVER TO THE N POSITION IN THIS OPERATION. PERFORM THIS OPERATION WHEN DRIVING STRAIGHT.

The use of any other refrigerant or lubricant will cause severe damage to the air conditioning system and will require the replacement of all air conditioner system components. The refrigerant HFC-134a (R-134a) in your NISSAN vehicle does not harm the earths ozone layer. Although this refrigerant does not affect the earths atmosphere, certain government regulations require the recovery and recycling of any refrigerant during automotive air conditioner system service. A NISSAN dealer has the trained technicians and equipment needed to recover and recycle your air conditioner system refrigerant. Contact a NISSAN dealer when servicing your air conditioner system.
9-6 Technical and consumer information

SPECIFICATIONS ENGINE

Model Type Cylinder arrangement Bore x Stroke Displacement Firing order Idle speed A/T (in N position) Ignition timing (degree B.T.D.C. at idle speed) CO % at idle Standard PLFR5A-11 Spark plug Hot PLFR4A-11 Cold PLFR6A-11 Spark plug gap (Nominal) Camshaft operation in (mm) 0.043 (1.1) Timing chain See the Emission Control Information label on the underside of the hood. VK56DE Gasoline, 4-cycle, DOHC 8-cylinder, V-block, Slanted at 90 in (mm) 3.858 x 3.622 (98 x 92) cu in (cm3) 338.78 (5,552) 18736542
The spark ignition system of this vehicle meets all requirements of the Canadian Interference-Causing Equipment Regulations.
Technical and consumer information 9-7
Wheels 17 x 7.5J 18 x 8.0J Tires P285/70R17 P265/70R18 Spare tire Full size

DIMENSIONS AND WEIGHTS

Overall length Overall width Overall height 2wd with roof rack 4wd with roof rack 2wd without roof rack 4wd without roof rack Front tread 17 inch tire 18 inch tire Rear tread 17 inch tire 18 inch tire Wheelbase Gross vehicle weight rating Gross axle weight rating Front Rear in (mm) in (mm) lb (kg) 67.5(1,715) 67.9(1,725) in (mm) in (mm) 67.5(1,715) 67.9(1,725) in (mm) in (mm) in (mm) in (mm) 77.8(1,977) 78.7(1,998) 75.7(1,922) 76.5(1,944) in (mm) 206.9(5,255) in (mm) 78.8(2,001)