Reviews & Opinions
Independent and trusted. Read before buy Nissan Murano-2004!

Nissan Murano-2004

Manual

Preview of first few manual pages (at low quality). Check before download. Click to enlarge.
Manual - 1 page  Manual - 2 page  Manual - 3 page 

Download (English)
Nissan Murano-2004 CAR, size: 2.9 MB
Instruction: After click Download and complete offer, you will get access to list of direct links to websites where you can download this manual.

About

Nissan Murano-2004WeatherTech W40TN-W20TN 2003-2007 Nissan Murano All Weather Floor Mats 1st...
These all-weather mats have deeply sculpted channels designed to trap water, road salt, mud and sand. Made of up to 16 lbs. of pliable natural rubber, these mats won\'t curl, crack or harden in sub-zero weather. WeatherTech Classic Premium Rubber Floor Mats meet FMVSS302, are TUV approved, and are manufactured to ISO 9001 standards, your assurance of quality. Color: Tan Seats: 1st & 2nd Row Hybrid? :Yes; Actual product may differ from image shown .

Details
Brand: WeatherTech
Part Number: W40TN-W20TN

 

[ Report abuse or wrong photo | Share your Nissan Murano-2004 photo ]

Video review

Nissan Murano 3.5 Awd 4x4 Autom tica Full Equipo. 2004

 

User reviews and opinions

<== Click here to post a new opinion, comment, review, etc.

Comments to date: 6. Page 1 of 1. Average Rating:
kevinkithk 11:10pm on Monday, November 1st, 2010 
It handles great. In fact, the handling and traction allowed me to avoid a potential major multi-car accident Nothing bad about the product. It handles great. In fact, the handling and traction allowed me to avoid a potential major multi-car accident Nothing bad about the product.
bellan 2:05pm on Sunday, October 24th, 2010 
Nice car, but definitely skip the navigation.  Smooth, quiet ride, surprisingly large interior, good acceleration and braking, nice sound system. It is a good buy without the Navigational sys...  I like the comfort, the ride, the practicality of all the mechanical interfaces.
Mono 2:07am on Tuesday, April 27th, 2010 
I have purchased 3 Lexus cars in the last 5 years. The last one being an RX400. My car died over night in the middle of snow. There were so few reviews about this Lexus RX400h car when I was looking to buy one I promised myself I would add one when I had sufficient experience... Fast OR frugal--the choice is yours! With a 0 to 60 time around 7seconds it leaves most 4X4s for dead.
andyyank 6:34pm on Monday, April 19th, 2010 
I love my lexus rx 300. I bought it at the auctions in Glasgow a few years ago the replace my freelander (which was agricultural next to the Lexus.
sylvester 10:12am on Saturday, March 20th, 2010 
I received one of the best birthday gifts from my wife, and I feel like paying her back soon. The gift was an all new Lexus RX 350.
TK 9:25pm on Thursday, March 18th, 2010 
With an impending birth we needed to change our 2 seater sports car for something more practical and decided to go for an SUV style vehicle for the sp...

Comments posted on www.ps2netdrivers.net are solely the views and opinions of the people posting them and do not necessarily reflect the views or opinions of us.

 

Documents

doc0

SPA0945C

SPA1097
SUPPLEMENTAL AIR BAG WARNING LABELS
Warning labels about the supplemental air bag system are placed in the vehicle as shown in the illustration.
SUPPLEMENTAL AIR BAG WARNING LIGHT
The supplemental air bag warning light, displayin the instrument panel, monitors the ing circuits of the supplemental front air bag, supplemental side air bag and curtain sideimpact air bag systems, and pre-tensioner seat belt. The circuits monitored by the air bag warning light are the diagnosis sensor unit, satellite sensors, front air bag modules, side air bag modules, curtain side-impact air bag modules, and pre-tensioner seat belt and all related wiring. After turning the ignition key to the ON position, the supplemental air bag warning light illumi-
1-20 Seats, restraints and supplemental air bag systems
nates. The supplemental air bag warning light will turn off after about 7 seconds if the system is operational. If any of the following conditions occur, the supplemental front air bag, supplemental side air bag and curtain side-impact air bag systems, and pre-tensioner seat belt need servicing: The supplemental air bag warning light remains on after approximately 7 seconds. The supplemental air bag warning light flashes intermittently. The supplemental air bag warning light does not come on at all. Under these conditions, the supplemental front air bags, supplemental side air bags, curtain side-impact air bags and/or pre-tensioner seat belt may not operate properly. They must be checked and repaired. Take your vehicle to the nearest NISSAN dealer.
bag systems and/or pre-tensioner seat belt will not operate in an accident. To help avoid injury to yourself or others, have your vehicle checked by a NISSAN dealer as soon as possible.
Repair and replacement procedure
The supplemental front air bags, supplemental side air bags, curtain side-impact air bags and pre-tensioner seat belt are designed to activate on a one-time-only basis. As a reminder, unless it is damaged, the supplemental air bag warning light will remain illuminated after inflation has occurred. Repair and replacement of these systems should be done only by a NISSAN dealer. When maintenance work is required on the vehicle, the supplemental front air bags, side air bags, curtain side-impact air bags, related parts and pre-tensioner seat belt should be pointed out to the person conducting the maintenance. The ignition key should always be in the LOCK position when working under the hood or inside the vehicle.
side air bag or curtain side-impact air bag has inflated, the air bag module will not function again and must be replaced. Additionally, if any of the supplemental front air bags inflate, the activated pre-tensioner seat belt must also be replaced. The air bag module and pre-tensioner seat belt system should be replaced by a NISSAN dealer. The air bag modules and pre-tensioner seat belt system cannot be repaired. The supplemental front air bag and side air bag, curtain side-impact air bag systems and pre-tensioner seat belt system should be inspected by a NISSAN dealer if there is any damage to the front end or side portion of the vehicle. If you need to dispose of these supplemental systems or scrap the vehicle, contact a NISSAN dealer. Correct disposal procedures are set forth in the appropriate NISSAN Service Manual. Incorrect disposal procedures could cause personal injury.

SEAT BELT MAINTENANCE

To clean the seat belt webbings, apply a mild soap solution or any solution recommended for cleaning upholstery or carpets. Then brush the webbing, wipe it with a cloth and allow it to dry in the shade. Do not allow the seat belts to retract until they are completely dry.
1-32 Seats, restraints and supplemental air bag systems
NISSAN recommends that the child restraint be installed in the rear seat. According to accident statistics, children are safer when properly restrained in the rear seat than in the front seat. An improperly installed child restraint could lead to serious injury or death in an accident. In general, child restraints are designed to be installed with the lap portion of a three-point type seat belt. In addition, this vehicle is equipped with a universal child restraint lower anchor system, referred to as the LATCH (Lower Anchors and Tethers for CHildren) system. Some child restraints include two rigid or webbingmounted attachments that can be connected to these lower anchors. For details, see LATCH (Lower Anchors and Tethers for CHildren) SYSTEM later in this section. Child restraints for infants and children of various sizes are offered by several manufacturers. When selecting any child restraint, keep the following points in mind: choose only a restraint with a label certifying that it complies with Federal Motor Vehicle
Safety Standard 213 or Canadian Motor Vehicle Safety Standard 213. check the child restraint in your vehicle to be sure it is compatible with the vehicles seat and seat belt system. if the child restraint is compatible with your vehicle, place your child in the child restraint and check the various adjustments to be sure the child restraint is compatible with your child. Always follow all recommended procedures. All US states and Canadian provinces require that infants and small children be restrained in approved child restraints at all times while the vehicle is being operated.
Improper use of a child restraint can result in increased injuries for both the infant or child and other occupants in the vehicle. Follow all of the child restraint manufacturers instructions for installation and use. When purchasing a child

After removing a rear seat head restraint for top tether installation, store it securely to prevent it from causing injury to passengers or damage to the vehicle in case of sudden braking or an accident. Always replace it and adjust properly when top tether is no longer in use. The top tether strap may be damaged by contact with the tonneau cover or items in the cargo area. Remove the tonneau cover from the vehicle or secure it and any cargo. Your child could be seriously injured or killed in a collision if the top tether strap is damaged. If your child restraint has a top tether strap, it must be secured to the anchor point provided behind its position. First, adjust the seatback so that it is upright. Then secure the child restraint with the rear seat belt or the LATCH system (outboard positions), C as applicable. For the center position k, remove the anchor cover from the anchor point as illustrated. Keep the removed cover in a secure place to prevent loss or damage.
Remove the head restraint from the seatback. Store it in a secure place. Position the top tether strap over the top of the seatback and secure it to the tether anchor bracket that provides the straightest installation. Tighten the tether strap according to the manufacturers instruction to remove any slack. For best child restraint fit, see the child restraint installation instructions in this section and the child restraint manufacturers instructions.
If you have any questions when installing a top strap child restraint on the rear seat, consult your NISSAN dealer for details.

Anchor point locations

The anchor bolt should be installed at all times to prevent the possibility of exhaust fumes entering the passenger compartment through the holes. See Precautions when starting and driving in the 5. Starting and driving section for exhaust gas. Anchor points are located as illustrated.
A k : for rear left side seat position B k : for rear right side seat position C k : for rear center seat position
ing a child restraint. Failure to use the retractors locking mode will result in the child restraint not being properly secured. The child restraint could tip over or otherwise be unsecured and cause injury to the child in a sudden stop or collision.

SSS0300

INSTALLATION ON FRONT PASSENGER SEAT
Never install a rear facing child restraint in the front passenger seat. Supplemental air bags inflate with great force. A rear facing child restraint could be struck by the supplemental air bag in a crash and could seriously injure or kill your child.

Brake warning light

This light functions for both the parking brake and the foot brake systems. Parking brake indicator: When the ignition key is in the ON position, the light comes on when the parking brake is applied.
2-10 Instruments and controls
If the brake fluid level is below the MIN mark on the brake fluid reservoir, do not drive until the brake system has been checked at a NISSAN dealer. 2. If the brake fluid level is correct, have the warning system checked by a NISSAN dealer. Avoid high speed driving and abrupt braking. If both the brake warning light and the antilock brake warning light come on simultaneously, it may indicate the anti-lock brake system is not functioning properly. See Antilock brake warning light earlier in this section.
Do not continue driving if the belt is loose, broken or missing.
ous damage to the engine almost immediately. Turn off the engine as soon as it is safe to do so.

Low fuel warning light

This light comes on when the fuel in the tank is getting low. Refuel as soon as it is convenient, preferably before the fuel gauge reaches E. There will be a small reserve of fuel remaining in the tank when the fuel gauge needle reaches E.

Door open warning light

This light comes on when any of the doors are not closed securely while the ignition key is ON.

Charge warning light

If the light comes on while the engine is running, it may indicate that the charging system is not functioning properly. Turn the engine off and check the alternator belt. If the belt is loose, broken, missing or if the light remains on, see your NISSAN dealer immediately.
This light warns of low engine oil pressure. If the light blinks or comes on during normal driving, pull off the road in a safe area, stop the engine immediately and call a NISSAN dealer or other authorized repair shop. The oil pressure warning light is not designed to indicate a low oil level. Use the dipstick to check the oil level. See Engine oil in the 8. Maintenance and do-it-yourself section.
Engine oil pressure warning light
Low washer fluid warning light
This light comes on when the washer tank fluid is at a low level. Add washer fluid as necessary. See Window washer fluid in the 8. Maintenance and do-it-yourself section.
Seat belt warning light and chime
The light and chime remind you to fasten seat belts. The light illuminates whenever the ignition key is turned to ON, and will remain illuminated until the drivers seat belt is fastened. At the same time, the chime will sound for about 6 seconds unless the drivers seat belt is securely fastened.
Running the engine with the oil pressure warning light on could cause seri-
See Seat belts in the 1. Seats, restraints and supplemental air bag systems section for precautions on seat belt usage.

SIC2052 SIC2048

Be sure not to put anything on top of the A photo sensor k located on the top lefthand side of the instrument panel. The photo sensor controls the autolamp; if it is covered, the photo sensor reacts as if it is dark and the headlights will illuminate.
Headlight beam select 1 k To select the low beam, put the lever in the
neutral position as shown.
Be sure to turn the light switch to the OFF position when you leave the vehicle for extended periods of time, otherwise this could result in a discharged battery. Never leave the light switch on when the engine is not running for extended periods of time even if the headlights turn off automatically.
To select the high beam, push the lever forward while the switch is in the position. Pull it back to select the low beam. headlight high beam.
3 k Pulling the lever toward you will flash the
2-22 Instruments and controls
When traveling with no heavy load or on a flat road, select position 0.
ately turning it to the ON position. This is not a malfunction. The daytime running lights will be turned off when the headlight switch is turned to the AUTO (only when the headlights are lit) or position or when the fog light is turned on. The daytime running lights will remain on until the ignition switch is turned to the ACC or OFF position.
Xenon headlights are extremely bright compared to conventional headlights. If the xenon headlights hit the rearview mirror of the vehicle ahead or the windshield of the oncoming vehicle, the driver of these vehicles may have difficulty driving because of the brightness. Use the headlight aiming control switch to lower the light axis. See earlier in this section for information on xenon headlights.
When the daytime running light system is active, tail lights on your vehicle are not on. It is necessary at dusk to turn on your headlights. Failure to do so could cause an accident injuring yourself and others.

SIC1911

Headlight aiming control (if so equipped)
Depending on the number of occupants in the vehicle and the load it is carrying, the headlight axis may be higher than desired. If the vehicle is traveling on a hilly road, the headlights may directly hit the rearview mirror of the vehicle ahead or the windshield of the oncoming vehicle. The light axis can be lowered with the operation of the switch. The larger the number designated on the switch, the lower the axis.
DAYTIME RUNNING LIGHT SYSTEM (CANADA ONLY)
The daytime running lights automatically illuminate when the engine is started with parking brake released. The daytime running lights operate with the headlight switch in the OFF position. position or in the The daytime running lights may come on after turning the key to the OFF position and immedi-

Tilting the sunroof

3 To tilt up, push the side k of the tilt switch. When the roof is open, it will automatically close and then tilt up. To tilt down the 4 sunroof, push the side k. When the roof is open, it will automatically close.
There are some small distances immediately before the closed position which cannot be detected. Make sure that all passengers have their hands, etc., inside the vehicle before closing the window.

SIC2062

AUTOMATIC SUNROOF
The sunroof will only operate when the ignition key is in the ON position. The automatic sunroof is operational for about 45 seconds, even if the ignition key is turned to the ACC or OFF position. If the drivers door or the front passengers door is opened during this period of about 45 seconds, power to the sunroof is canceled.
Restarting the sunroof sliding switch
The sliding switch will become inoperable after the battery terminal is disconnected, the electrical supply interrupted and/or some abnormality detected. Use the following re-set procedure to return sunroof operation to normal. 1. Keep pushing the tilting switch toward tilt UP. 2. After the lid has tilted up gradually, it will automatically close all the way, then return to normal operation.

Sliding the sunroof

To open the roof, slide the switch to the 1 side k. When the roof is tilted up, it will automatically tilt down and then open.
Auto reverse function (When closing the sunroof)
If the control unit detects something caught in
the sunroof as it moves to the front or tilts down, the sunroof will immediately open backward or tilt up. The auto reverse function can be activated when the sunroof is closed by automatic operation when the ignition key is in the ON position or for about 45 seconds after the ignition key is turned to the OFF position. Depending on the environment or driving conditions, the auto reverse function may be activated if an impact or load similar to something being caught in the sunroof occurs. If the auto reverse function malfunctions and repeats opening or tilting up the sunroof, keep pushing the tilt down switch within 5 seconds after it happens, then the sunroof will fully close gradually. In this case, make sure nothing is caught in the sunroof.
side the vehicle before closing the sunroof.
of the opening while the vehicle is in motion or while the sunroof is closing.

Sun shade

Open or close the sun shade by sliding it backward or forward. The shade will open automatically when the sunroof is opened. However, it must be closed manually.

SPA1575

within 5 seconds will unlock all doors and fuel filler lid.
Opening and closing front windows
Turn the drivers door key to the unlock position and hold for about 1 second, the front windows will begin to lower. To stop opening, turn the key to the neutral position. To close the front windows with the door key cylinder, turn the key to the lock position and hold for about 1 second. To stop closing, turn the key to the neutral position. In the event of a hand in the way, or other obstruction, the auto reverse function will activate.

LOCKING WITH KEY Power

The power door lock system allows you to lock or unlock all doors simultaneously. Turning the drivers door key to the front of the vehicle will lock all doors (including the back door) and fuel filler lid. Turning the drivers door key one time to the rear of the vehicle will unlock the drivers door. From that position, returning the key to neutral (where the key can only be removed and inserted) and turning it to the rear again
Pre-driving checks and adjustments

SPA1422

SPA1576

SPA1577

LOCKING WITH INSIDE LOCK KNOB
To individually lock the doors, move the inside lock knob to the LOCK position, then close the door. To unlock, pull the inside lock knob up to the UNLOCK position. The front doors will automatically be unlocked and you can open the door by pulling the inside door handle. When locking the door without a key, be sure not to leave the key inside the vehicle.
LOCKING WITH POWER DOOR LOCK SWITCH
All door and fuel filler lid locks will be engaged when the power door lock switch is moved to the LOCK position with the drivers or front passengers door open. Then close the door and all doors will be locked.
CHILD SAFETY REAR DOOR LOCK
Child safety locking helps prevent doors from being opened accidentally, especially when small children are in the vehicle. When the lever is in the LOCK position, the rear door can be opened only from the outside.

Lockout protection

When the power door lock switch (driver or front passenger) is moved to the LOCK position with the key in the ignition and any door open, all doors will lock and unlock automatically. This helps to prevent the keys from being accidentally locked inside the vehicle.
3-4 Pre-driving checks and adjustments

Choose an item on the display using the joystick and push the ENTER button for operation.
This has two functions. Go back to the previous display (cancel). If you touch PREV button during setup, the setup will be canceled and/or the display will return to the previous screen. Finish setup.
HOW TO USE THE TRIP BUTTON
When the TRIP button is pushed, the following models will display on the screen. Warning message (if there are any) TRIP 1 (Elapsed Time, Driving Distance, Average Speed) TRIP 2 FUEL ECONOMY (Average Fuel Economy, Distance to Empty)
4-8 Display screen, heater, air conditioner and audio systems

SAA0654

SAA0695

SAA0655

MAINTENANCE (Engine Oil, Tire Rotation and Tire Pressure if so equipped).

Maintenance items

You can set the engine oil and the tire rotation interval. And the tire pressure will appear on the screen (if the tire pressure system is equipped). To display the setting of the maintenance interval, select the Engine Oil or Tire Rotation key using the joystick and push the ENTER button.
Trip 1, trip 2 and fuel economy items
To reset the TRIP 1, TRIP 2 and FUEL ECONOMY, select the RESET key using the joystick and push the ENTER button or push the TRIP button for more than approximately 1.5 seconds.
In case of flat tire, a message is displayed on the screen: FLAT TIRE very low tire air pressure.

SAA0656

SAA0657
To set the maintenance interval, select the Maintenance Schedule key by using the joystick and push the joystick to right or left. To reset the maintenance interval, select the RESET key using the joystick and push the ENTER button. To display the MAINTENANCE INFORMATION, automatically when setting trip distance is reached, select the Display Maintenance Notification key and push the ENTER button.
Pressure indication in ** psi on the screen indicates that the pressure is being measured. After a few driving trips, the pressure for each tire will be displayed randomly. The order of tire pressure figures displayed on the screen does not correspond with the actual order of the tire position. Tire pressure rises and falls depending on the heat caused by the vehicles traveling condition and the temperature.

4-20 Display screen, heater, air conditioner and audio systems
a station transmitter, the signals will tend to fade and/or drift. Static and flutter: During signal interference from buildings, large hills or due to antenna position, usually in conjunction with increased distance from the station transmitter, static or flutter can be heard. This can be reduced by adjusting the treble control counterclockwise to reduce treble response. Multipath reception: Because of the reflective characteristics of FM signals, direct and reflected signals reach the receiver at the same time. The signals may cancel each other, resulting in momentary flutter or loss of sound.
power lines, electric signs and even traffic lights.
SATELLITE RADIO RECEPTION
When the satellite radio is first installed or the battery has been replaced, the satellite radio may not work properly. This is not a malfunction. Wait more than 10 minutes with satellite radio ON for satellite radio to receive all of the necessary data. No satellite radio reception is available and NO SAT is displayed when the SAT button is pressed, unless optional satellite receiver and antenna were factory installed (late availability only/retrofit unavailable), and an XM or SIRIUSTM satellite radio service subscription is active. Satellite radio performance may be effected if cargo carried on the roof rack blocks the satellite radio signal. If possible, do not put cargo over the satellite radio antenna.

SAA0306

FM RADIO RECEPTION
Range: FM range is normally limited to 25 to 30 miles (40 to 48 km), with monaural (single channel) FM having slightly more range than stereo FM. External influences may sometimes interfere with FM station reception even if the FM station is within 25 miles (40 km). The strength of the FM signal is directly related to the distance between the transmitter and receiver. FM signals follow a line-of-sight path, exhibiting many of the same characteristics as light. For example they will reflect off objects. Fade and drift: As your vehicle moves away from

AM RADIO RECEPTION

AM signals, because of their low frequency, can bend around objects and skip along the ground. In addition, the signals can be bounced off the ionosphere and bent back to earth. Because of these characteristics. AM signals are also subject to interference as they travel from transmitter to receiver. Fading: Occurs while the vehicle is passing through freeway underpasses or in areas with many tall buildings. It can also occur for several seconds during ionospheric turbulence even in areas where no obstacles exist. Static: Caused by thunderstorms, electrical

The tape deck employs a permalloy head which allows for improved reproduction of high frequency ranges. Noise is also greatly reduced by the combined use of the Dolby NR (Noise Reduction) system. The auto loudness circuit enhances the low frequency range automatically in both radio reception and tape and CD playback. ONOFF/Volume control: Turn the ignition key to ACC or ON, and then push the ONOFF/Volume control knob while the system is off to call up the mode (radio, tape or CD) which was playing immediately before the system was turned off. When no CD or tape is loaded, the radio will come on. While the
The text will change as follows:
AM FM or SAT (Satellite) When FM/AM/SAT radio select button is pushed while the ignition switch is in the ACC or ON, the radio will come on at the station last played. The last station played will also come on when the power knob is turned to ON. No satellite radio reception is available and NO SAT is displayed when the SAT button is pressed, unless optional satellite receiver and antenna were factory installed (late availability only/retrofit unavailable), and an XM or SIRIUSTM satellite radio service subscription is active. If a compact disc or tape is playing when the FM/AM/SAT radio select button is turned to ON, the compact disc or tape will automatically be turned off and the last radio station played will come on. The FM stereo indicator ST will glow during FM stereo reception. When the stereo broadcast signal is weak, the radio will automatically change from stereo to monaural reception.

TUNE (Tuning):

The radio should not be tuned while driving so full attention may be given to vehicle operation. To tune the radio, push the RADIO TUNE button or ) or turn the Tuning knob to right ( or left. Use these buttons for manual tuning. To move quickly through the channels, hold either of the RADIO TUNE buttons down for more than 1.5 seconds. SEEK/SCAN tuning: or for less Push the SEEK button than 1.5 seconds, to tune from high to low or low to high frequencies and stops at the next broadcasting station. Push the or SEEK button for more than 1.5 seconds to tune from low to high frequencies and stops at each broadcasting station for 5 seconds. Pushing the button again during this 5 seconds period will stop SCAN tuning and the radio will remain tuned to that station.
Display satellite radio text: To indicate the satellite mode text, push the AUDIO knob during satellite radio play. Artist Title BASS TREBLE FADE BALANCE SSV Display mode To change the indicated text in display mode, turn the tuning knob within 2 seconds.
Pause/mute button: To mute or pause the audio sound, push the PAUSE/MUTE button. To release the mute or pause, push the button again.
FM-AM-SAT radio operation
or SAT FM/AM/SAT radio select:
Pushing the FM/AM (Type B), FM, AM (Type A) or SAT band select button will change the band as follows:

The audio system can be operated using the controls on the steering wheel.

POWER on/off switch

With the ignition key turned to the ACC or ON position, push the POWER switch to turn the audio system on or off.

MODE select switch

Push the mode select switch to change the mode in the sequence of FM, AM, SAT, CD and Tape.
4-32 Display screen, heater, air conditioner and audio systems
CAR PHONE OR CB RADIO Removing the antenna
You can remove the antenna if necessary. Hold the bottom of the antenna and remove by turning counterclockwise. When installing a CB, ham radio or car phone in your NISSAN, be sure to observe the following cautions, otherwise the new equipment may adversely affect the Engine control system and other electronic parts.
Be sure that antenna is removed before the vehicle enters an automatic car wash. Be sure to fold down the antenna before the vehicle enters a garage with a low ceiling.
A cellular telephone should not be used while driving so full attention may be given to vehicle operation. Some jurisdictions prohibit the use of cellular telephones while driving. If you must make a call while your vehicle is in motion, the hands free cellular phone operational mode (if so equipped) is highly recommended. Exercise extreme caution at all times so full attention may be given to vehicle operation. If a conversation in a moving vehicle requires you to take notes, pull off the road to a safe location and stop your vehicle before doing so.

SAA0532

ANTENNA Placing the antenna
You can adjust the antenna to three different positions manually.
Keep the antenna as far as possible away from the electronic control modules. Keep the antenna wire more than 8 in (20 cm) away from the electronic control system harness. Do not route the antenna wire next to any harness. Adjust the antenna standing-wave ratio as recommended by the manufacturer. Connect the ground wire from the CB radio chassis to the body. For details, consult a NISSAN dealer.
4-34 Display screen, heater, air conditioner and audio systems

5 Starting and driving

Precautions when starting and driving.. 5-2 Exhaust gas (Carbon monoxide).. 5-2 Three way catalyst... 5-3 Low tire pressure warning system (if so equipped)... 5-3 Avoiding collision and rollover.. 5-5 On-pavement and offroad driving precautions (AWD)... 5-5 Drinking alcohol/drugs and driving.. 5-5 Driving safety precautions... 5-6 Ignition switch... 5-8 Key positions... 5-8 Nissan Vehicle Immobilizer System.. 5-9 Before starting the engine... 5-9 Starting the engine... 5-10 Driving the vehicle... 5-10 CVT (Continuously Variable Transmission). 5-10 M-CVT (CVT with Manual shift mode). 5-14 Parking brake.. 5-18 Cruise control (if so equipped).. 5-19 Precautions on cruise control. 5-19 Cruise control operations.. 5-19 Break-in schedule... 5-21 Increasing fuel economy.. 5-21

SDI1574

Tire and loading information label 1 k Seating capacity: The maximum number of
2 k Vehicle load limit: See loading information in
occupants that can be seated in the vehicle.
the Technical and consumer information section. nally installed on the vehicle at the factory.
3 k Original tire size: The size of the tires origi-
is added, press the core of the valve stem briefly with the tip of the gauge stem to release pressure. Recheck the pressure and add or release air as needed. 6. Install the valve stem cap. 7. Check the pressure of all other tires, including the spare. (Refer to the Wheels and tires section)
how much weight each tire can support. You may not find this information on all tires because it is not required by law. H: Speed Rating. The speed rating denotes the speed at which a tire is designed to be driven for extended periods of time. The ratings range from 98 miles per hour (MPH) to 186 MPH. (You may not find this information on all tires because it is not required by law.)
2 k TIN (Tire Identification Number) for new tire

TIRE LABELING

Federal law requires tire manufacturers to place standardized information on the sidewall of all tires. This information identifies and describes the fundamental characteristics of the tire and also provides the tire identification number (TIN) for safety standard certification. The TIN can be used to identify the tire in case of a recall in case of recall.
SDIk Tire size (example: P215/60R16 94H)
P: The P indicates the tire is designed for passenger vehicles. (Not all tires have this information.) Three-digit number (215): This number gives the width in millimeters of the tire from sidewall edge to sidewall edge. Two-digit number (60): This number, known as the aspect ratio, gives the tires ratio of height to width. R: The R stands for radial. Two-digit number (16): This number is the wheel or rim diameter in inches. Two- or three-digit number (94): This number is the tires load index. It is a measurement of

T Tachometer... 2-4 Temperature gauge, Engine coolant temperature gauge... 2-5 Three way catalyst.. 5-3 Tilting steering wheel.. 3-13 Tire Flat tire... 6-2 Low tire pressure warning system. 5-3, 6-2 Pressure, Low tire pressure warning light. 2-12 Safety chain.. 9-20 Spare tire.. 8-35 Tire and loading information label. 9-12 Uniform tire quality grading.. 9-22 Tire and loading information label.. 9-12 Tires Tire chains.. 8-32 Tire pressure... 8-27 Tire rotation... 8-33 Types of tires.. 8-31 Wheel/tire size.. 9-9 Wheels and tires.. 8-27 Tonneau cover... 2-32 Top tether strap child restraints.. 1-40 Towing Tow truck towing.. 6-11 Towing a trailer.. 9-17 Towing load/specification chart.. 9-17 Towing safety.. 9-19 Trailer towing.. 9-17 Transceiver, HomeLink Universal Transceiver... 2-39
Transmission Driving with CVT (Continuously Variable Transmission).. 5-10 Transmission selector lever lock release.. 5-13, 5-17 Transmitter (See remote keyless entry system). 3-5 Traveling or registering your vehicle in another country... 9-10 Turn signal switch... 2-24 U Underbody cleaning.. 7-3 Uniform tire quality grading. 9-22 V Vanity mirror light.. 2-39 Vehicle Dimensions and weights.. 9-9 Identification number (VIN). 9-10 Loading information.. 9-14 Recovery (freeing a stuck vehicle).. 6-14 Security system... 2-16 Vehicle dynamic control (VDC) off switch. 2-27 Vehicle electronic systems. 4-12 Vehicle dynamic control (VDC) system (if so equipped).. 5-29 Vehicle load capacity.. 9-15 Ventilators... 4-16
W Warning labels, Air bag warning labels. 1-20 Warning light Air bag warning light.. 1-20, 2-12 Anti-lock brake warning light.. 2-9 AWD (all wheel drive) warning light. 2-10 AWD warning light.. 5-24 Brake warning light.. 2-10 Door open warning light.. 2-11 Low fuel warning light.. 2-11 Low tire pressure warning light.. 2-12 Seat belt warning light and chime.. 2-11 Warning lights.. 2-9 Warning, Hazard warning flasher switch. 2-25 Warning, Low tire pressure warning system... 5-3, 6-2 Warning, Warning/indicator lights and audible reminders... 2-9 Warranty, Emission control system warranty.. 9-23 Washer switch Rear window wiper and washer switch. 2-19 Windshield wiper and washer switch. 2-18 Washing... 7-2 Waxing... 7-2 Weights (See dimensions and weights).. 9-9 Wheel/tire size.. 9-9 Wheels and tires.. 8-27 Cleaning aluminum alloy wheels.. 7-3 Window washer fluid.. 8-13 Window(s) Cleaning.. 7-3 Power windows... 2-33 Windshield wiper and washer switch. 2-18
Wiper Rear window wiper and washer switch. Rear window wiper blade.. Windshield wiper and washer switch. Wiper blades.. X

2-19 8-19 2-18 8-17

Xenon headlights.. 2-20
GAS STATION INFORMATION FUEL RECOMMENDATION:
ENGINE OIL RECOMMENDATION:
API Certification Mark API grade SG/SH, Energy Conserving I & II or API grade SJ or SL, Energy Conserving ILSAC grade GF-I, GF-II & GF-III SAE 5W-30 viscosity oil is preferred for all ambient temperatures. SAE 10W-30, 10W-40 viscosity oil may be used for ambient temperatures above 0F (18C). See Capacities and recommended fuel/ lubricants in the 9. Technical and consumer information section for engine oil and oil filter recommendation.

 

Tags

PS-42D51S MHC-ZX70DVD Xchallenge Tuner S810 RAS18CH1 Venture Futura Canon S900 GTO75 2 EX-Z40 Sedan 113 Powerlite 76C VP-L800U Samsung P853 KDL-32S5550 PB8260 600LM Hannes Master CCD-TRV12E NV-GS35GC Music 1 PAC260 CDX-S2020 Street WAM 2070 860IS Elements 6 AIR Z HC-4500 LGV415 Travelmate 290E CX-ONE V4 Seat Exeo MS-3447GR CQ-DF583U Syberia UE40C6000RW 295LM-lm295b-ra- 2G CD-552E Serie XBM 338 260 WX EP3170 SB4101 ACX1000 SX-KN7000 Solution Disk RD-700NX CL408E Deere 4100 Communicator Htfb85 RZ-23LZ20 Instamedia PDP2225 RX-558R Z250A DVR530HD Scout Meridian GR-492WF Aswqlgu TXL32X10B R-308KW LS-10 Yamaha WX11 Dslr-A200 WM-GX674 URC22B-7 1 DVD 7916 TA BAR608HGA Urc 6012 BH-207 Camcorder TL753C HM161GI Sslcomp DDW1805W DLS B6A RM-VZ220 PT-53A81T DS1120 Review SUB 18 P4S133 Street V3 Easy 110 Aspire 5536 RE-32FZ10PX Phone CMT-J1MD Explorer-1996 Tx9000TS Mouse CA-mxjd5 HTS6515 12 HDR255 LRA-536

 

manuel d'instructions, Guide de l'utilisateur | Manual de instrucciones, Instrucciones de uso | Bedienungsanleitung, Bedienungsanleitung | Manual de Instruções, guia do usuário | инструкция | návod na použitie, Užívateľská príručka, návod k použití | bruksanvisningen | instrukcja, podręcznik użytkownika | kullanım kılavuzu, Kullanım | kézikönyv, használati útmutató | manuale di istruzioni, istruzioni d'uso | handleiding, gebruikershandleiding

 

Sitemap

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101