Nissan Murano-2007 Manual
Nissan Murano-2007 CAR, size: 3.6 MB
Here you can find all about Nissan Murano-2007 like manual and other informations. For example: review.
Nissan Murano-2007 manual (user guide) is ready to download for free.
On the bottom of page users can write a review. If you own a Nissan Murano-2007 please write about it to help other people. [ Report abuse or wrong photo | Share your Nissan Murano-2007 photo ]
User reviews and opinions
|berger||7:37am on Wednesday, November 3rd, 2010|
|I love my lexus rx 300. I bought it at the auctions in Glasgow a few years ago the replace my freelander (which was agricultural next to the Lexus. Fast OR frugal--the choice is yours! With a 0 to 60 time around 7seconds it leaves most 4X4s for dead.|
|mdhpasemicom||11:19am on Sunday, October 31st, 2010|
|Nice car, but definitely skip the navigation. Smooth, quiet ride, surprisingly large interior, good acceleration and braking, nice sound system. It is a good buy without the Navigational sys... I like the comfort, the ride, the practicality of all the mechanical interfaces.|
|breiter||3:33am on Friday, October 15th, 2010|
|I have purchased 3 Lexus cars in the last 5 years. The last one being an RX400. My car died over night in the middle of snow. There were so few reviews about this Lexus RX400h car when I was looking to buy one I promised myself I would add one when I had sufficient experience...|
|Exodus||10:38am on Friday, September 24th, 2010|
|I received one of the best birthday gifts from my wife, and I feel like paying her back soon. The gift was an all new Lexus RX 350.|
|Dean Martin||6:58am on Wednesday, September 8th, 2010|
|It handles great. In fact, the handling and traction allowed me to avoid a potential major multi-car accident Nothing bad about the product.|
|Saxmeister||1:43pm on Saturday, July 24th, 2010|
|It handles great. In fact, the handling and traction allowed me to avoid a potential major multi-car accident Nothing bad about the product.|
|FAlbrecht||2:29pm on Monday, April 5th, 2010|
|With an impending birth we needed to change our 2 seater sports car for something more practical and decided to go for an SUV style vehicle for the sp...|
Comments posted on www.ps2netdrivers.net are solely the views and opinions of the people posting them and do not necessarily reflect the views or opinions of us.
QUICK REFERENCE GUIDE
CONTROL PANEL DISPLAY
headlight and turn signal control
WINDSHIELD WIPER/ WASHER SWITCH
STEERING WHEEL SWITCHES FOR AUDIO CONTROL
TIRE PRESSURE MONITORING SYSTEM (TPMS)
HEADLIGHT AIMING CONTROL SWITCH
STEERING WHEEL TILT ADJUSTMENT*
AWD LOCK SWITCH
*See your Owners Manual for more information.
HEADLIGHT CONTROL AND TURN SIGNAL CONTROL HEADLIGHT SWITCH Turn the headlight switch to the position to turn on the front parking, tail, license plate and instrument panel lights. Turn the headlight switch to the position to turn on the headlights. All other lights remain on. AUTOMATIC HEADLIGHT OPERATION (if so equipped) The autolight system allows the headlights to be set so they turn on and off automatically. The autolight system can: Turn on the headlights, front parking, tail, license plate and instrument panel lights automatically when it is dark. Turn off all the lights when it is light. eep all the lights on for 45 seconds after you turn the key to OFF and all doors K are closed. TO ACTIVATE THE AUTOLIGHT SYSTEM: Turn the headlight switch to the AUTO position, then turn the ignition switch to ON. TO DEACTIVATE THE AUTOLIGHT SYSTEM: Turn the headlight switch to the OFF, FOG LIGHT OPERATION
NOTE: The headlights must be on and the low beams selected for the fog lights to operate. Turn the switch to the position to turn on the fog lights. Turn the switch to the OFF position to turn off the fog lights.
HEADLIGHT AIMING CONTROL SWITCH (with Xenon headlamps, if so equipped) Depending on the number of occupants in the vehicle and the load it is carrying, the headlight axis may be higher than desired. If the vehicle is traveling on a hilly road, the headlights may directly hit the rearview mirror of the vehicle ahead or the windshield of the oncoming vehicle. The light axis can be lowered with the operation of the switch. The larger the number designated on the switch, the lower the axis. When traveling without a heavy load or on a flat road, select position 0.
WINDSHIELD WIPER/WASHER SWITCH
The ignition switch must be in the ON position to activate the windshield wipers. Move the lever to the following positions to operate the windshield wipers:
1A Intermittent (INT) Front wipers operate
intermittently and can be further adjusted by twisting the time control ring 1B. operation of front wipers. operation of front wipers.
02 Low Speed (LO) Continuous low-speed 03 High Speed (HI) Continuous high-speed 04 Mist (MIST) Lift the lever up for one sweep of the front wipers. 05 Rear Wipers (REAR) Twist the end section to operate the first (INT)
1A 02 03
or second (ON) speed settings for the rear wipers.
The washer function activates the washer fluid and several sweeps of the wipers: For FRONT WASHER, pull lever toward you. For REAR WASHER, push lever away from you.
AWD LOCK SWITCH (if so equipped) Each time you push the lower part of the switch, the AWD mode will switch as follows: AUTO LOCK AUTO. Push the lower part of the AWD LOCK switch to select AUTO or LOCK mode, depending on the driving conditions. LOCK MODE For driving on rough roads. Push the lower part of the switch when the vehicle is stopped or driving less than 6 MPH (10 km/h). The AWD LOCK indicator light will come on. LOCK mode will change to AUTO mode automatically when the vehicle is accelerated or the vehicle speed is over approximately 6 MPH (10 km/h). AUTO MODE For driving on paved or slippery roads. Push the lower part of the switch. The AWD LOCK indicator light will go off.
STEERING WHEEL SWITCHES FOR AUDIO CONTROL (if so equipped) To turn on the steering wheel audio system, press PWR (power). To choose FM, AM, SAT (if so equipped), CD and Tape (if so equipped), press MODE repeatedly.
switch can be used to perform the following:
While in one of the preset radio station banks (A, B or C), push the switch for less than 1.5 seconds to change to a preset station. Push and hold the switch for more than 1.5 seconds to seek the next or previous broadcasting radio station. Push the switch for less than 1.5 seconds while playing a CD or tape to change tracks. Push and hold the switch for more than 1.5 seconds while playing a tape to fast forward or rewind the tape. Push the switch for less than 1.5 seconds to cancel the fast forward or rewind function and resume tape play.
<> <> <> <> <>
If the vehicle is equipped with a CD changer, push and hold the more than 1.5 seconds to change between CDs.
Push the VOL control switch up or down to increase or decrease volume.
CRUISE CONTROL To activate the cruise control, push the ON.OFF switch The indicator light in the instrument panel will illuminate. To set cruising speed, accelerate the vehicle to the desired speed, push the COAST/SET switch and release it. The SET indicator light in the instrument panel will illuminate. To reset at a faster cruising speed, push and hold the ACCEL/RES switch. When the vehicle attains the desired speed, release the switch. To reset at a slower cruising speed, push and hold the COAST/SET switch. Release the switch when the vehicle slows to the desired speed. To resume a preset speed, push and release the ACCEL/RES switch. The vehicle returns to the last set cruising speed when the vehicle speed is 25 MPH (40 km/h) or over. To cancel cruise control, push the CANCEL switch or tap the brake pedal. The SET indicator light in the instrument panel will go out. To turn off cruise control, push the ON.OFF switch. Both the CRUISE indicator light and the SET light in the instrument panel will go out.
REMOTE KEYLESS ENTRY SYSTEM
button to lock all doors.
Press the button once to unlock the drivers door only. Press thelpd0151 again within 5 seconds to button unlock all doors. Press and hold the button for longer than 0.5 seconds. The panic alarm will sound and headlights will stay on for 25 seconds. The panic alarm stops when it has run for 25 seconds or when any button is pressed on the keyfob.
Horn Beep Feature Using the Panic Alarm
The horn beep feature can be deactivated. Refer to the Display screen, heater, air conditioner and audio systems section in your Owners Manual for the procedure. Intelligent Key System
The Intelligent Key System allows you to lock or unlock your vehicle and start the engine. Note: It is important to make sure the Intelligent Key is with you (that is, in your pocket or purse). The operating range of the door and trunk lock/unlock function is approximately 31 in (0.8 m). Locking the vehicle - Push any door handle Request Switch 01 once. Unlocking the vehicle - Push any door handle Request Switch 01 once. The corresponding door will unlock. Push the door handle Request Switch 01 again within 1 minute; all other doors will unlock. STARTING THE ENGINE Push the ignition knob in. Confirm the Intelligent Key warning light is illuminated green. Turn the ignition knob to start the engine. TURNING THE ENGINE OFF Shift transmission into P (Park). Turn ignition knob to LOCK position. An audible warning chime will sound when exiting the vehicle if the ignition knob is not completely turned to the OFF position.
XTRONIC ContinuouslY Variable Transmission (CVT) The Xtronic CVT does not produce a gear change sensation like traditional automatic transmissions. The transmission in your Murano requires a special fluid available only at your NISSAN dealer. No other fluid will meet the exact requirements of the new Xtronic CVT.
MANUAL SHIFT MODE (if so equipped) When the shift selector lever is shifted from D (Drive) to the manual shift gate, the transmission enters the manual shift mode. In the manual shift mode, shift range is displayed on the position indicator in the meter. When shifting up, move the shift selector lever to the + (up) side. (Shifts to higher range.) When shifting down, move the shift selector lever to the - (down) side. (Shifts to lower range.) In manual shift mode, the transmission automatically shifts down to M1 (first) before the vehicle comes to a stop. When accelerating again, it is necessary to shift up to the desired range. When canceling the manual shift mode, return the shift selector lever to the D (Drive) position. The transmission returns to the normal driving mode.
CONTROL PANEL DISPLAY with Navigation System (if so equipped) TRIP BUTTON When the TRIP button is pressed, the following modes will display on the screen: Warning messages (if there are any) TRIP 1 (Elapsed Time, Driving Distance, Average Speed) TRIP 2 (Elapsed Time, Driving Distance, Average Speed) FUEL ECONOMY (Average Fuel Economy, Distance to Empty) MAINTENANCE (Engine Oil, Tire Rotation) OFF MAINTENANCE ITEMS You can set the engine oil and the tire rotation interval. To display the setting of the maintenance interval, select the Engine Oil or Tire Rotation key using the joystick and press the ENTER button. To set the maintenance interval, select the Maintenance Schedule key by using the joystick and pushing the joystick to the right or left. To reset the maintenance interval, select the Reset key using the joystick and press the ENTER button. CLOCK/SEt ADJUSTMENT The clock on the display screen can be adjusted using the joystick and the following procedure. Press the SETTING button, then select SYSTEM SETTINGS from the menu on the display screen. Next select CLOCK to enter the CLOCK SETTINGS mode. Then select the HOURS or MINUTES key and hold the joystick left or right to adjust the time. After the desired time is shown on the display screen, press the BACK button to store. Refer to both the Navigation System Owners Manual and your Owners Manual for additional information.
Automatic Climate Control
AUTO BUTTON Press the AUTO button 01 for automatic cooling and/or dehumidified heating. The indicator light on the button will come on when the system is activated. DUAL TEMPERATURE CONTROL ON/OFF BUTTON Press the DUAL button to turn the passengers side temperature controls on or off. This will allow the passengers side temperature to be adjusted independently from the drivers side control. DRIVERS TEMPERATURE CONTROL DIAL Turn the drivers temperature control dial left for cold air or right for hot air. The drivers temperature control dial adjusts the temperature for both driver and passenger when the DUAL button is not activated. PASSENGERS TEMPERATURE CONTROL DIAL Turn the passengers side air control dial to the left for cold air or right for hot air. MODE BUTTON The MODE button allows you to select the air flow outlets. Air flows from the center and side vents. Air flows from the center, side, and foot vents.
DEFROSTING/DEFOGGING FRONT AND SIDE WINDOWS Push the front window defroster switch on. The indicator light on the button will come on. Turn the drivers side temperature control dial 03 left for cold air or right for hot air to set the desired temperature. To set the defroster on high, turn the manual fan speed control dial to set fan speed to maximum.
Air flows mainly from the foot vents. Air flows from the defroster and foot vents.
DEFROSTING/DEFOGGING REAR WINDOW Push the rear window defroster switch on. The indicator light on the button will come on. Push the switch again to manually turn off the defrost. NOTE: The rear window defroster automatically turns off in approximately 15 minutes. AIR RECIRCULATION BUTTON Press the air recirculation button Press the air recirculation button to recirculate air inside the vehicle. again to turn air recirculation off.
The air recirculation mode cannot be selected if the air flow control dial is in the defrost position.
FRESH AIR BUTTON Press the fresh air button to draw outside air into the passenger compartment. The indicator light on the button will come on when the system is activated.
FM/AM/SAT* RADIO WITH CASSETTE PLAYER AND CD CHANGER (if so equipped)
LOAD BUTTON LOAD A SINGLE DISC - Press the LOAD button for less than 1.5 seconds. Select the loading slot by pressing the CD insert select button (1-6), then insert the CD. LOAD UP TO 6 DISCS - Press and hold the LOAD button for more than 1.5 seconds. The slot numbers (1-6) will illuminate on the display when CDs are loaded into the changer.
SEEK/TRACK BUTTON For radio, press to seek stations. For CD, press to select previous/next tracks. STATIOn AND CD SELECT BUTTON To store a radio station in a preset first select A, B, or C memory bank by pressing the PRESET ABC button and tuning to the desired FM, AM, or SAT* station. Then press the desired station select button for at least 2 seconds. When the preset indicator illuminates, a beep will sound, indicating memorization is complete. To retrieve a previously set station, select the memory bank where the preset was set, then press the corresponding station select button. SCAN BUTTON Press the SCAN button to tune from low to high frequencies and stop at each broadcasting station for 5 seconds. If listening to a CD, each track will play for about 10 seconds. CAT FOLDER BUTTON CATEGORY (CAT) When the CAT FOLDER button is pressed for more than 1.5 seconds during FM (SAT*) mode, the PTY (PROGRAM TYPE) (if so equipped) name of the current tuned station is displayed. Certain program types may include ROCK, COUNTRY, JAZZ, CLASSICAL, etc. MP3 PLAYBACK (if so equipped) In addition to playing audio CDs, the audio system can play MP3 files recorded on CD-ROM, CD-R, and CD-RW discs. Each disc can have a maximum of 8 folder levels and 255 folders. A total of 512 MP3 files can be played back. During MP3 playback, some recorded ID3 tag information can be displayed by pressing the DISP button. Use the CAT FOLDER button to navigate the MP3 files.
DISP (display) BUTTON Press to display CD or radio text. PRESET A. B.C BUTTON Press the PRESET A.B.C button until you reach the desired setting. The radio is equipped with three separate banks of 6 station presets. You may store any combination of FM, AM, or SAT* radio presets on each bank. CD SELECT BUTTON Press to activate CD functions. RADIO BAND SELECT Press the RADIO band select button to change the band as follows: Without satellite radio: AM With satellite radio: AM FM1 FM2 AM SAT2 AM FM1 FM2 SAT1
TAPE BUTTON Press the TAPE button. The system will come on and the tape will play. RPT (repeat) /RDM (random) BUTTON Change tape or CD play patterns. TUNING AND AUDIO CONTROL KNOB To manually tune the radio, turn the TUNE knob. Adjust the Bass, Midrange, Treble, Fade, Balance, and Speed Sensitive Volume (SSV) (if so equipped) by pressing the AUDIO knob until the desired mode appears in the display. Then turn the TUNE knob to adjust to the desired level.
*SAT presets are only available on SAT equipped vehicles.
SUNROOF CONTROLS (if so equipped) TILTING THE SUNROOF To tilt the sunroof up, push the tilt switch to the 01 position. If the roof is open, it will automatically close and then tilt up. To tilt the sunroof down, push the tilt switch to the 02 position. SLIDING THE SUNROOF To open the roof, slide the switch to the automatically tilt down and then open. To close the roof, slide the switch to the
position. If the roof is tilted up, it will position. or position.
The position of the sliding roof lid can be chosen by the position of the sliding switch. To fully open or close the roof, move the switch completely to the
AUTOMATIC DRIVER POSITIONER (if so equipped) The automatic driver positioner system has two features: Memory storage function. Entry/exit function. MEMORY STORAGE FUNCTION Two positions for the drivers seat, accelerator and brake pedals, and outside mirrors can be stored in the automatic driver positioner memory. Follow these procedures to set driver preferences. SET THE DESIRED POSITIONING 1. Set the shift selector lever to the P (Park) position. 2. Turn the ignition on and adjust the drivers seat, accelerator and brake pedals, and outside mirrors to the desired positions. 3. Press the SET (memory) button and within 5 seconds press the position button (1 or 2) for at least 1 second until the indicator light illuminates. The position is now stored in memory. LINK TO KEYFOB Within 5 seconds of setting the memory position (indicator light is on and ignition is on), press the button on the remote. A keyfob can be linked to each memory button. lpd0151 If memory positioning is reset to a new location, it will be necessary to re-link the keyfob. RECALLING A MEMORY SETTING FROM THE MEMORY PAD With the ignition on and shift selector lever in the P (Park) position, press the position button (1 or 2) for at least 1 second. FROM THE KEYFOB If properly linked, operation of the button will automatically return the drivers seat, accelerator and brake pedals, and outside mirrors to the memorized position. lpd0151 ENTRY/EXIT FUNCTION The drivers seat automatically moves to allow the driver to get into and out of the drivers seat more easily. The drivers seat slides backward when: The drivers door is opened with the ignition switch in the LOCK position. The drivers seat returns to the previous position when: The key is inserted into the ignition switch. The ignition switch is pushed with the drivers door closed (Intelligent Key models) The ignition switch is placed in the ON position.
POWER SEAT AND PEDAL ADJUSTMENTS (if so equipped) Pedal Position Adjustment (if so equipped) Push the switch 01 forward or backward to move the brake and accelerator pedal to the desired position. Only adjust the pedals when the shift selector lever is in P (Park.)
SEAT Position Adjustment Move the control 02 forward or backward to adjust the seat cushion forward or backward.
Pull up on the control 02 to raise the seat cushion; press down to lower the cushion. SEAT RECLINING Adjustment Push the switch 03 forward to move the seatback forward; push it back to move the seatback backward. lumbar support (if so equipped for drivers seat) Push each side of the switch 04 to adjust the lumbar support.
FOLDING DOWN THE REAR SEATS
To fold the seats flat, disconnect and secure the
center seat belt and tongues from the retractor base.
Remove the head restraints and close the tonneau
sub cover (if so equipped).
Fold the seatback forward by either using the pull
strap located on the outside edge of the rear seat or pulling on the release lever beside the cargo area.
REAR VIEW MONITOR (if so equipped) When the shift selector lever is moved to the R (Reverse) position, the monitor display will automatically change to show the area behind the vehicle. The colored lines on the display screen indicate approximate distances to objects. Red 1.5 feet Yellow 3 feet Green 7 and 10 feet
FUEL-FILLER DOOR The fuel-filler door automatically unlocks when the drivers door is unlocked. With the drivers door unlocked, push the right side of the fuel-filler door to open. To lock, close the fuel-filler door and lock the drivers door.
FRONT-PASSENGER AIR BAG STATUS LIGHT This vehicle is equipped with the Nissan Advanced Air Bag system. Under some conditions, depending on the type of occupant or object detected in the front passenger seat by the occupant classification sensor, the front-passenger air bag is designed to automatically turn OFF. When the front-passenger air bag is OFF, the front-passenger air bag status light will illuminate*. For example: When the system detects that the front-passengers seat is occupied by a small adult, child or child restraint as outlined in the Owners Manual, the will illuminate to indicate that the front-passenger air bag is OFF and will not inflate in a crash. When the front-passengers seat is occupied and the passenger meets the conditions outlined in the Owners Manual, the will not illuminate to indicate that the front-passenger air bag is operational. *When the system detects that the front-passengers seat is unoccupied, the passenger air bag status light will not illuminate even though the front-passenger air bag is OFF. Refer to the Owners Manual for detailed information regarding the Nissan Advanced Air Bag System.
SEAT BELT WARNING LIGHT AND CHIME The light and chime remind you to fasten your seat belts. The light illuminates whenever the ignition key is turned to the ON or START position and remains illuminated until the drivers seat belt is fastened. At the same time, the chime sounds for about 6 seconds unless the drivers seat belt is securely fastened. The seat belt warning light may also illuminate if the front passengers seat belt is not fastened when the front passengers seat is occupied. For 5 seconds after the ignition switch is in the ON position, the system does not activate the warning light for the front passenger. Refer to the Owners Manual for detailed information regarding seat belt usage.
TIRE PRESSURE MONITORING SYSTEM (if so equipped) This system monitors tire pressure. Please remember, this system does not detect a sudden drop in tire pressure (for example, a blowout while driving). It also does not monitor the air pressure in the spare tire. Tire pressure is affected by temperature. Low outside temperature causes lower tire pressure. This may cause the low tire pressure warning light to illuminate. If the low tire pressure warning light comes on, check the tire pressure in all four tires. Adjust the low tire pressure to the recommended COLD tire pressure shown on the Tire and Loading Information label to turn the low tire pressure warning light off. If TPMS is not functioning properly, the low tire pressure warning light will flash for approximately 60 seconds when the key is turned on. The light will remain on after the 60 seconds. Have the system checked by a NISSAN dealer.
This easy-to-use Quick Reference Guide is intended to help you more fully appreciate some of the unique features and functions of your new vehicle. However, it is not intended to replace your Owners Manual. The Owners Manual contains more detailed information to help you better understand the important safety warnings, features, operation, and maintenance of your vehicle.
Nissan, the Nissan Brand Symbol, SHIFT_ tagline, Z and Nissan model names are Nissan trademarks. 2006 Nissan North America, Inc. QR7E-0Z50U2 Printing: January 2007 (13)
KE-42MR1 Asterisk LAC5810 Studio 9 HR2939 XR-6690RDS CQ-DFX602N Blender DV-626D PNA 465T Dhcmd333 IC-7600 Server Star-2005 Q-mini LT100 ZC1000 LN40B550k1F KAC-629S Gx1008B GR-DVP5EG KX-TG7341E Steriliser V-1100 Angeles Mp71 JR-S300 Mkii RM-BR300 Scanjet 4850 1 II Camileo S10 G13SR3 CR 2510 TX-NR1007 LRM-519 FE2514N1 Destiny Helixboard12 Desire Z EPC2203 Green Digitech BP50 PL-221Z CD2351S-24 N210-JB02 XS-L121p5W System 3010C MDS712 525 XC-W WIM 2090 HOW-TOS DVD-S422 HP-530 TT200 Izzi ALU ML-1640 ETS 3040 AF KX-TG6700B Metadec VGN-A117S W12GTI TA-180 8 AA 26140 TS Deville 1993 Guide VGN-A417M D-NE20LS FAX-L120 111SC CD-writer 9100 VR-5000 LX 700 LE46A856s1M Casio SK-5 26556 EU 1 1 Peekbox 300 WD-12336AD KX-TG6412E PV-DV102D Landxplorer 2011 NAD C717 AI7-G Achieva 1995 HF8400 KH 1171 PET836 DVD-R120 Alesis BRC Calculator DCR-SR62E EKG6700X Roland CY-8 RSH1kbrs WTC0715F 8025 GP FP737S-D DVD-P244 Review NAS-50HDE
manuel d'instructions, Guide de l'utilisateur | Manual de instrucciones, Instrucciones de uso | Bedienungsanleitung, Bedienungsanleitung | Manual de Instruções, guia do usuário | инструкция | návod na použitie, Užívateľská príručka, návod k použití | bruksanvisningen | instrukcja, podręcznik użytkownika | kullanım kılavuzu, Kullanım | kézikönyv, használati útmutató | manuale di istruzioni, istruzioni d'uso | handleiding, gebruikershandleiding
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101