Users Guide for Nokia 1100

9356144 Issue 1

DECLARATION OF CONFORMITY We, NOKIA CORPORATION declare under our sole responsibility that the product Rh-18 is in conformity with the provisions of the following Council Directive: 1999/5/EC. A copy of the Declaration of Conformity can be found at http://www.nokia.com/phones/declaration_of_conformity/.
Copyright 2003 Nokia. All rights reserved. Reproduction, transfer, distribution or storage of part or all of the contents in this document in any form without the prior written permission of Nokia is prohibited. US Patent No 5818437 and other pending patents. T9 text input software Copyright (C) 1997-2003. Tegic Communications, Inc. All rights reserved. Nokia and Nokia Connecting People are trademarks or registered trademarks of Nokia Corporation. Other product and company names mentioned herein may be trademarks or tradenames of their respective owners. Nokia tune is a sound mark of Nokia Corporation. Nokia operates a policy of continuous development. Nokia reserves the right to make changes and improvements to any of the products described in this document without prior notice. Under no circumstances shall Nokia be responsible for any loss of data or income or any special, incidental, consequential or indirect damages howsoever caused. The contents of this document are provided "as is". Except as required by applicable law, no warranties of any kind, either express or implied, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose, are made in relation to the accuracy, reliability or contents of this document. Nokia reserves the right to revise this document or withdraw it at any time without prior notice. The availability of particular products may vary by region. Please check with the Nokia dealer nearest to you.

Contents

FOR YOUR SAFETY...7 General information....10
Stickers in the sales package.....10 Access codes.....10

1. Getting started...12

Inserting a SIM card....12 Charging the battery.....14 Keys and connectors....15 Display and standby mode.....16 Changing the covers....17 Putting on the wrist strap....18 Flashlight......18

2. Call functions...20

Making a call.....20 Making a call using the phone book...20 Making a conference call....20 Redialling.....21 Speed dialling.....21 Answering a call.....22 In-call operations....22 Listening to voice messages....22 Locking the keypad.....22

3. Writing text....24

Setting predictive text input on or off...24
Copyright 2003 Nokia. All rights reserved.
Using predictive text input....24 Writing compound words....25 Using traditional text input....26

4. Menu functions....27

List of menu functions.....28 Messages (Menu 01)....31 Write messages.....31 Reading a text message (Inbox)....33 Sent items....33 Drafts.....34 Chat.....34 Picture messages.....34 Receiving a picture message....35 Distribution lists.....35 Templates....36 Smileys......36 Delete messages....36 Message settings.....37 Profile 1 (Menu 1-11-1)....37 Common (Menu 1-11-2)....37 Info service.....38 Voice mailbox number....38 Service command editor.....38 Contacts (Menu 2 ).....38 Searching for a name and phone number...39 Settings for Contacts....40 Call register (Menu 3)....40 Recent call lists.....41
Call counters and call timers....41 Tones (Menu 4)....42 Profiles (Menu 5).....43 Settings (Menu 6)....44 Time settings....44 Clock......44 Date setting.....44 Auto update of date & time...44 Call settings.....44 Phone settings.....46 Enhancement settings....46 Keyguard settings.....47 Security settings.....48 Restore factory settings....49 Alarm clock (Menu 7)....49 Reminders (Menu 8)....50 Games (Menu 9).....50 Extras (Menu 10).....51 Calculator.....51 Making a calculation....51 Making a currency conversion....52 Stopwatch....52 Countdown timer.....53 Composer.....53 Screen saver.....53 Flashlight.....54 SIM services (Menu 11).....54
5. Battery information....55
Charging and Discharging....55
Care and maintenance...57 Important safety information....58

Charger and accessory

Check the model number of any charger before use with this device. This device is intended for use when supplied with power from ACP-7, ACP-8, ACP-12 , LCH-9 and LCH-12. Warning: Use only batteries, chargers and accessories approved by the phone manufacturer for use with this particular phone model. The use of any other types may invalidate any approval or warranty applying to the phone, and may be dangerous. For availability of approved accessories, please check with your dealer. When you disconnect the power cord of any accessory, grasp and pull the plug, not the cord.

General information

Stickers in the sales package
The stickers contain important information for service and customer support purposes. Keep these stickers in a safe place. Attach the package. Attach the sticker to the Club Nokia Invitation Card supplied in the sales sticker to your warranty card.

Access codes

Security code: This code, supplied with the phone, protects your phone against unauthorised use. The preset code is 12345. Refer to Security settings on page 48 to see how it works. PIN code: This code, supplied with the SIM card, protects the card against unauthorised use. Set on the PIN code request in the Security settings menu (see Security settings on page 48), so that the code is requested each time the phone is switched on. If you enter the PIN code incorrectly three times in succession, the SIM card is blocked. You must enter the PUK code to unblock the SIM card and set a new PIN code.
PIN2 code: This code is supplied with some SIM cards and is required to access certain services, such as charging unit counters. If you enter the PIN2 code incorrectly three times in succession, PIN2 code blocked appears on the display, and you will be asked for the PUK2 code. Change the security code, PIN code and PIN2 code in Change of access codes in the Security settings menu (see Security settings on page 48). Keep the new codes secret and in a safe place separate from your phone. PUK and PUK2 code: These codes may be supplied with the SIM card. If this is not the case, contact your local service provider.

1. Getting started

Inserting a SIM card
Keep all miniature SIM cards out of small childrens reach.

The SIM card and its contacts can be damaged easily by scratches or bending, so be careful when handling, inserting or removing the card. Before installing the SIM card, make sure that the phone is switched off, disconnected from the charger or any other device and then remove the battery. 1. Press the back cover release button (1), slide the back cover (2) and lift it off the phone.
2. Remove the battery by lifting it using the finger grip (3).
3. Lift the SIM card holder using the finger grip. Flip the holder open (4). Press the SIM card carefully into the SIM card slot (5). Make sure that the goldcoloured connectors on the card are facing downwards and that the bevelled corner is on the right. Close the SIM card holder and press it to lock.
4. Align the gold-coloured connectors on the battery with the corresponding connectors on the phone, and push the opposite end of the battery until it snaps into place (6).
5. Align the bottom of the back cover with the bottom of the phone (7), press the top of the back cover to lock it into place (8).

Getting started

Charging the battery
Do not charge the battery if either of the phone covers has been removed. 1. Connect the lead from the charger to the base of the phone. 2. Connect the charger to an AC wall outlet. The battery indicator bar starts scrolling. Charging a BL-5C battery with the ACP-7 charger takes up to 3 hours 30 minutes. If Not charging is displayed, wait for a while, disconnect the charger, plug it in again, and retry. If charging still fails, contact your dealer. 3. When the battery is fully charged, the bar stops scrolling. Disconnect the charger from the phone and the AC outlet.
TIPS ON EFFICIENT OPERATION: Your phone has a built-in antenna. As with any other radio transmitting device, do not touch the antenna unnecessarily when the phone is switched on. Contact with the antenna affects call quality and may cause the phone to operate at a higher power level than otherwise needed. Not touching the antenna area during a phone call optimises the antenna performance and the talktime of your phone.

Keys and connectors

1. Flashlight Your phone has a built-in lamp. See Flashlight on page 18. 2. Navi key The function of the Nokia Navi key depends on the text shown above it. In this guide, the symbol is followed by the related guiding text, e.g. Menu or Select. 3. Power key Switches the phone on or off. When the keypad is locked, pressing briefly turns the phones display lights on for approximately 15 seconds. 4. Scroll keys Enable scrolling through names, phone numbers, menus or settings. Adjust the earpiece volume during a call. In standby mode, shows the list of last dialled numbers and shows the names and phone numbers saved in Contacts. 5. The clear/exit key Deletes characters from the display and exits from different functions.

To insert a number, press and hold the number key you want. To insert several numbers, press and hold and key in the numbers. 2. If the displayed word is the one you want, press next word. If you want to change the word, press want appears. and start writing the repeatedly until the word you
If the "?" is displayed after the word, the word is not in the dictionary. To add the word to the dictionary, press Spell, key in the word (traditional text input is used) and press OK.

Writing compound words

Key in the first half of the word, press , and then key in the second half.

Writing text

Using traditional text input
Press the key marked with the letter that you want repeatedly until the letter appears. Use the following functions to edit the text: To add a space, press. repeatedly, or To add a punctuation mark or special character, press press , select the desired character, and press Use. To move the cursor left or right, press or To delete the character to the left of the cursor, press screen, press and hold this key. To switch between upper and lower case, press.
, respectively. To clear the
To add a number, press and hold the desired key. To switch between letters and numbers, press and hold. To key in a letter which is on the same key as the previous one, press (or wait until the cursor appears), and key in the new letter. or

4. Menu functions

You can use the key features in the menus in the following ways: By scrolling 1. Press Menu in standby mode. 2. Press or to scroll to the main menu you want, and press Select to enter it. Press to exit a main menu. 3. If the menu contains submenus, scroll to the one you want and press Select to enter it. Press to exit a submenu. If you do not want to save the changes you made to menu settings, press and hold. By shortcut The menus, submenus and setting options are numbered. These numbers are called shortcut numbers. Menu and key in quickly, within three seconds, the In standby mode, press shortcut number of the menu you want to access. Repeat this for submenus. Menu, For example, if you want to activate Call waiting service, press (for Settings), (for Call settings), for Call waiting service), (for Activate). Note that the shortcut number for Messages is 01.

Menu functions

List of menu functions
1. Messages 1. Write messages 2. Inbox 3. Drafts 4. Sent items 5. Chat 6. Picture messages 7. Distribution lists 8. Templates 9. Smileys 10.Delete messages 11.Message settings 12.Info service 13.Voice mailbox number 14.Service command editor 2. Contacts 1. Search 2. Service Nos. 1 3. Add contact 4. Delete

1. Shown only if supported by your SIM card.
5. Edit 6. Copy 7. Assign tone 8. Send phone no. 9. Settings 10.Speed dials 3. Call register 1. Missed calls 2. Received calls 3. Dialled numbers 4. Delete recent call lists 5. Call duration 6. Call costs 7. Call cost settings 8. Prepaid credit 4. Tones 1. Ringing tone 2. Ringing volume 3. Incoming call alert 4. Message alert tone 5. Keypad tones 6. Warning tones 7. Vibrating alert
8. Rhythmic backlight alert 5. Profiles 1. General 2. Silent 3. Discreet 4. Loud 5. My style 6. (empty) 6. Settings 1. Time settings 2. Call settings 3. Phone settings 4. Enhancement settings1 5. Keyguard settings 6. Security settings 7. Restore factory settings 7. Alarm clock 8. Reminders 1. Add new 2. View all2
1. This menu is shown only if the phone is or has been connected to a headsetor handsfree unit available for the phone.
3. Erase 9. Games 10.Extras 1. Calculator 2. Stopwatch 3. Countdown timer 4. Composer 5. Screen saver 6. Flashlight 11.SIM services 1

Messages (Menu 01)

Write messages
You can write and send multi-part messages consisting of several ordinary text messages (Network Service). Invoicing may be based upon the number of ordinary messages that are needed for any multi-part message. The number of available characters/the current part number of a multi-part message are shown on the top right of the display, for example 120/2. If you use special (Unicode) characters,
2. View all and Erase are shown only after a reminder has been added 1. The availability, name and contents depend on the SIM card used.
such as Cyrillic characters, more parts may be needed for the message than would otherwise be required. Note that predictive text input may use Unicode characters. To send a message, the phone number of your message centre has to be saved in the phone. See Message settings on page 37. 1. In standby mode, press Menu and select Messages and Write message. 2. Key in the message. The number of available characters and the current part number are shown on the top right of the display. 3. When the message is complete, press recipients phone number, and press Options, select Send, key in the OK.
If you want to send the message to several people, select Sending opts and Send to many, scroll to the first recipient, and press Send. Repeat this for each recipient. To send a message to a predefined distribution list, select Sending opts and Send to list. To define and edit distribution lists, see Distribution lists on page 35. Other options are: Use template, Insert options, Small fonts or Large fonts, Clear text, Dictionary, Instructions, Exit editor, Sending profile (refer to Message settings on page 37), Save message, Delete and Dictionary.
Note: When sending messages via the SMS Network Service, your phone may display the words "Message sent". This is an indication that the message has been sent by your phone to the message centre number programmed into your phone. This is not an indication that the message has been received at the intended destination. For more details about SMS services, check with your service provider.

If a message fails to be sent to one or more recipients, a report listing the number of failures, successful sendings and not found names will be displayed. You can select each category by pressing Select. Names in the not found group are names in the distribution list that have been deleted from the phone book. You can remove them from the list by pressing Remove. Resend to resend the message to the failed recipients. View to view the list of failed recipients.

Templates

You can view or edit the preset messages (templates) that you can use for writing a message.

Smileys

You can edit and store the smileys such as ":-)", and use them in compiling messages.

Delete messages

Press Menu, select Messages and Delete messages. To delete all read messages from all folders, select All read and press OK. Then press OK when Delete read messages from all folders? is displayed. To delete all the read messages in a folder, scroll to the folder and press OK. Then press OK when Delete all read messages from folder? is displayed.

Message settings

The phone offers two kinds of message settings: settings specific to each setting group (set) and settings common to all text messages.

Profile 1 (Menu 1-11-1)1

A profile is a collection of settings needed for sending text and picture messages. Each set has the following settings: Message centre number, Messages sent as, Message validity and Rename sending profile. You need the message centre number to send text and picture messages. You can obtain this number from your service provider.

Common (Menu 1-11-2)2

The settings in this submenu apply to all text messages that you send, irrespective of the chosen set. The available settings are: Delivery reports, Reply via same centre and Character support Select Character support to define how the phone handles Unicode characters in text messages.3 If you select the Full option, the phone sends all the Unicode characters, such as and Cyrillic characters, included in a text message to a compatible phone, if supported by your network.
1. The total number of sets depends on how many sets your SIM card offers. 2. The shortcut number of this menu depends on the number of sets available. Here, it is assumed that only one set is available. 3. Availability of this menu may vary according to your service provider.
If you select the Reduced option, the phone tries to convert the Unicode characters into the corresponding non-Unicode characters, for example to a, and converts the lower case Greek characters into upper case. If no such nonUnicode counterpart exists, the characters are sent as Unicode characters.

Info service

With this Network Service , you can receive messages on various topics from the network. For details, contact your service provider.

Voice mailbox number

You can save and change the phone number of your voice mailbox (Network Service).

Service command editor

You can send service requests to your service provider. Key in the characters you want. Press and hold to switch between letters and numbers. Press Send to send the request.

Contacts (Menu 2 )

You can save names and phone numbers in the phones memory (internal phone book) and in the SIM cards memory (SIM phone book). The internal phone book can store up to 50 names.
Searching for a name and phone number
In standby mode, press Menu and select Contacts and Search. Key in the first character(s) of the name you are looking for and press Search. Press or to find the name you want. If the name or phone number is saved in the SIM card memory, is shown at the upper right corner of the display; if it is saved in the phones internal memory, is shown instead. QUICK SEARCH: Press name. Scroll with or in standby mode, key in the first letter of the to find the name you want.
You can also use the following options: Service Nos. to call the service numbers of your service provider if the numbers are included on your SIM card. (Network Service). Info numbers to call the information numbers of your service provider if the numbers are included on your SIM card. (Network Service). Add contact to save names and phone numbers in the phone book. Delete to delete names and phone numbers from the phone book one by one or all at once. Edit to edit the names and numbers in Contacts. Copy to copy names and phone numbers all at once or one by one from the phones memory to the SIM cards memory, or vice versa. Assign tone to set the phone to play the ringing tone you want when you receive a call from a particular phone number. Select the phone number or
name you want and press Assign. Note that this function only works when both the network and the phone are able to identify and send the callers identity. Send phone no. to send a persons contact information as an Over The Air (OTA) message if supported by the network.

Rhythmic backlight alert: Sets the backlights of the phone to flash in the rhythm of the selected ringing tone or message alert tone. The vibrator does not operate when the phone is connected to a charger or a desktop stand.

Profiles (Menu 5)

You can customise the phone tones for different events and environments. Initially, personalise the setting groups and profiles to your liking and then you only need to activate a profile to use it. Activating a profile and changing its settings In the Profiles menu, select the profile and select Activate. To change the settings of the selected profile, select Personalise. Select: Ringing tone, Ringing volume, Incoming call alert, Message alert tone, Keypad tones, Warning tones, Vibrating alert, Rhythmic backlight alert, Screen saver, or Rename (not available under General). Select the option you want and press OK. You can also change the settings of the currently selected profile in Tone settings , see Tones (Menu 4) on page 42. Tip: To activate a profile quickly in standby mode or during a call: Press OK. the key quickly, scroll to the desired profile, and press

Settings (Menu 6)

In this menu you can adjust various settings of the phone. You can also reset some menu settings to their default values by choosing Restore factory settings.

Time settings

To set the phone to show the current time in standby mode, adjust the time, and select the 12-hour or 24-hour time format. If the battery was removed from the phone, you may need to set the time again.

Date setting

To set the correct date. If the battery was removed from the phone, you may need to set the date again.
Auto update of date & time
This Network Service updates the date and time according to the current time zone. The automatic update of date and time does not change the time you have set for the alarm clock or the reminder notes. They are in local time. Updating may cause some alarms that you have set to expire.

Calculator
The phone is provided with a calculator that can also be used for rough currency conversions.
This calculator has limited accuracy and rounding errors may occur, especially in long divisions.
Menu in standby mode, and select Extras and Calculator.

Making a calculation

The keys to insert a digit. inserts a decimal point. Press to delete the last digit. To change the sign, press Options and select Change sign. Press once for "+", twice for "-", three times for "*" and four times for "/".
To get the result, press Options and select Equals. Press and hold to clear the display for a new calculation.
Making a currency conversion
To save the exchange rate: Press Options, select Exchange rate, select Foreign unit expressed in domestic units or Domestic unit expressed in foreign units, key in the value (press for a decimal point), and press OK. To make the conversion: key in the currency amount to be converted, press Options, and select In domestic or In foreign.

Stopwatch

The stopwatch can be used for time measurement, for example in different sports. Press Menu, and select Extras and Stopwatch. Press Start to start timing. To take the time, press Stop. When the timing is stopped, you can press Options for Start, Reset or Exit. If you select Start, timing continues from the previous stop time. Reset stops the current timing and sets the time to zero. To set the timing to continue in the background, press and hold the time is running, is flashing in standby mode. twice. While
Using the stopwatch consumes the battery and the phone's operating time will be reduced. Be careful not to let it run in the background when performing other operations with your phone.

Countdown timer

You can set the alarm to sound after a period of lapsed time. Press Menu, select Extras andCountdown timer. Key in the alarm time and press OK. You can also key in a note for the alarm, change the time and stop the timer. When the timer is running, is shown in standby mode. When the alarm time is reached, the phone sounds a tone and flashes the related text. Press any key to stop the alarm.

Composer

You can create your own ringing tones. Select the tone that you want to edit and key in the notes. For example, press for note f. shortens (-) and lengthens (+) the duration of the note or rest. inserts a rest. sets the octave. makes the note sharp (not available for notes e and b). and move the cursor left or right. Press to delete a note or rest to the left of the cursor. When the tone is complete, press Clear screen or Exit Options and select Play, Save, Tempo,

Screen saver

You can select that a picture is activated on the phone display after a certain length of time, Timeout. Press Menu and select Extras and Screen saver.
Select the picture and the timeout after which the screen saver will be activated. Note that the screen saver overrides all the graphics and texts on the display in standby mode.

Flashlight

See Flashlight on page 18.

SIM services (Menu 11)

This menu is shown only if your SIM card provides additional services. The name and contents of this menu depend on the services available.
Note: For availability, rates and information on using SIM services, contact your SIM card vendor, e.g. network operator, service provider or other vendor. Note: Your phone must be switched on to use this function. Do not switch on the phone when wireless phone use is prohibited or when it may cause interference or danger.

5. Battery information

Charging and Discharging
Your phone is powered by a rechargeable battery. Note that a new battery's full performance is achieved only after two or three complete charge and discharge cycles! The battery can be charged and discharged hundreds of times but it will eventually wear out. When the operating time (talk-time and standby time) is noticeably shorter than normal, it is time to buy a new battery. Use only batteries approved by the phone manufacturer and recharge your battery only with the chargers approved by the manufacturer. Unplug the charger when not in use. Do not leave the battery connected to a charger for longer than a week, since overcharging may shorten its lifetime. If left unused a fully charged battery will discharge itself over time. Temperature extremes can affect the ability of your battery to charge. Use the battery only for its intended purpose. Never use any charger or battery which is damaged. Do not short-circuit the battery. Accidental short-circuiting can occur when a metallic object (coin, clip or pen) causes direct connection of the + and - terminals of the battery (metal strips on the battery) for example when you carry a spare battery in your pocket or purse. Short-circuiting the terminals may damage the battery or the connecting object. Leaving the battery in hot or cold places, such as in a closed car in summer or winter conditions, will reduce the capacity and lifetime of the battery. Always try to keep the battery between 15C and 25C. A phone with a hot or cold battery may temporarily not

Posted facilities

Switch your phone off in any facility where posted notices so require.
Potentially explosive atmospheres
Switch off your phone when in any area with a potentially explosive atmosphere and obey all signs and instructions. Sparks in such areas could cause an explosion or fire resulting in bodily injury or even death. Users are advised to switch off the phone when at a refuelling point (service station). Users are reminded of the need to observe restrictions on the use of radio equipment in fuel depots (fuel storage and distribution areas), chemical plants or where blasting operations are in progress. Areas with a potentially explosive atmosphere are often but not always clearly marked. They include below deck on boats; chemical transfer or storage facilities; vehicles using liquified petroleum gas (such as propane or butane); areas where the air contains chemicals or particles, such as grain, dust or metal powders; and any other area where you would normally be advised to turn off your vehicle engine.

Vehicles

Only qualified personnel should service the phone, or install the phone in a vehicle. Faulty installation or service may be dangerous and may invalidate any warranty which may apply to the unit. Check regularly that all wireless phone equipment in your vehicle is mounted and operating properly. Do not store or carry flammable liquids, gases or explosive materials in the same compartment as the phone, its parts or accessories. For vehicles equipped with an air bag, remember that an air bag inflates with great force. Do not place objects, including both installed or portable wireless equipment in the area over the air bag or in the air bag deployment area. If in-vehicle wireless equipment is improperly installed and the air bag inflates, serious injury could result. Using your phone while in the air is prohibited. Switch off your phone before boarding an aircraft. The use of wireless telephones in an aircraft may be dangerous to the operation of the aircraft, disrupt the wireless telephone network and may be illegal. Failure to observe these instructions may lead to suspension or denial of telephone services to the offender, or legal action or both.

Emergency calls

Important: This phone, like any wireless phone, operates using radio signals, wireless and landing networks as well as user-programmed functions. Because of this, connections in all conditions cannot be guaranteed. Therefore you should never rely solely upon any wireless phone for essential communications (e.g. medical emergencies).
Emergency calls may not be possible on all wireless phone networks or when certain network services and/or phone features are in use. Check with local service providers.

3310_en.qxd

12.12.2001 12:35

Page 1

LIMITED MANUFACTURERS WARRANTY
PART OF EUROPE & AFRICA REGION
This limited warranty shall apply in part of Nokia Mobile Phones Europe & Africa Region unless a local warranty exists. Nokia Corporation, Nokia Mobile Phones (Nokia) warrants that this NOKIA product (Product) is at the time of its original purchase free of defects in materials, design and workmanship subject to the following terms and conditions: 1. This limited warranty is given to the end-purchaser of the Product (Customer). It shall neither exclude nor limit i) any mandatory statutory rights of the Customer or ii) any of the Customers rights against the seller/dealer of the Product. 2. The warranty period is twelve (12) months from the date on which the first Customer purchased the Product. In case of a subsequent purchase or other change of owner/user, such warranty period shall continue for the remaining part of the twelve (12) month period and otherwise remain unaffected. This limited warranty is only valid and enforceable in the following countries: Bosnia, Bulgaria, Croatia, Cyprus, the Czech Republic, Estonia, any member state of the European Union, Hungary, Iceland, Israel, Latvia, Lithuania, Macedonia, Malta, Norway, Poland, Romania, the Slovak Republic, Slovenia, Switzerland and Turkey. 3. During the warranty period Nokia or its authorized service company will repair or replace, at Nokias sole discretion, a defective Product. Nokia will return the repaired Product or another Product to the Customer in good working condition. All parts or other equipment for which replacements have been provided shall become the property of Nokia. 4. A repaired or replaced Product will not be given a prolonged or renewed warranty period. 5. This limited warranty will not cover painted covers or other similar personalized parts. In all cases that require unlocking or locking of an operator SIMlock, Nokia will first direct the Customer to such operator for unlocking or locking of the operator SIM-lock before repairing or replacing the Product. 6. This limited warranty shall not apply to deterioration due to normal wear and tear. This limited warranty shall further not apply if: (i) the defect was caused by the fact that the Product has been subjected to: use in contradiction with the owners/user manual, rough handling, exposure to moisture, dampness or extreme thermal or environmental conditions or rapid changes in such conditions, corrosion, oxidation, unauthorized modifications or connections, unauthorized opening or repair, repair by use of unauthorized spare parts, misuse, improper installation, accident, forces of nature, spillage of food or liquid, influence from chemical products or other acts beyond the reasonable control of Nokia (including but not limited to deficiencies in consumable parts, such as batteries which all by their nature have a limited lifetime, and breakage or damage to antennas) unless the defect was caused directly by defects in materials, design or workmanship; (ii) Nokia or its authorized service company was not notified by the Customer of the defect within thirty (30) days after the appearance of the defect within the warranty period; (iii) the Product was not returned to Nokia or its authorized service company within thirty (30) days after the appearance of the defect within the warranty period; (iv) the Product serial number, the accessory date code or the IMEI number has been removed, erased, defaced, altered or is illegible; (v) the defect was caused by a defective function of the cellular network; (vi) the defect was caused by the fact that the Product was used with or connected to an accessory not manufactured and supplied by Nokia or used in other than its intended use; (vii) the defect was caused by the fact that the battery was short-circuited or seals of the battery enclosure or cells were broken or show evidence of tampering or the battery was used in equipment other than for which it has been specified; or (viii) the Product software needs to be upgraded due to changes in cellular network parameters. 7. To claim this limited warranty the Customer shall present either i) a legible and non-modified original warranty card which clearly indicates the name and address of the seller, the date and place of purchase, the product type and the IMEI or other serial number or alternatively ii) a legible and non-modified original purchase receipt which contains the same information, if such purchase receipt is presented to the seller/dealer of the Product. 8. This limited warranty is the Customers sole and exclusive remedy against Nokia and Nokias sole and exclusive liability against the Customer for defects or malfunctions of the Product. This limited warranty replaces all other warranties and liabilities, whether oral, written, (non-mandatory) statutory, contractual, in tort or otherwise. Nokia is in no event liable for any incidental, consequential or indirect damage, costs or expenses. Neither is Nokia in any event liable for any direct damage, costs or expenses, if the Customer is a legal person. 9. Any change or amendment to this limited warranty requires Nokias prior written consent.

9359974/02

WARRANTY CARD
FILL IN WITH BLOCK LETTERS Purchasers Name: _____________________________________________________ Address: _____________________________________________________________ _____________________________________________________________ Country: _____________________________________________________________ Phone: ______________________________________________________________ Date of Purchase (dd/mm/yy): / / Product Type (on phone type label under battery): Product Model (on phone type label under battery): Phone Serial No (on phone type label under battery):

12.12.2001 12:35 Page 2

Place of Purchase: _____________________________________________________ Store Name: __________________________________________________________ Store Address: ________________________________________________________

Read these simple guidelines. Not following them may be dangerous or illegal. Read the complete user guide for further information.
ENHANCEMENTS Use only approved enhancements and batteries. Do not connect incompatible products. WATER-RESISTANCE Your phone is not water-resistant. Keep it dry. BACKUP COPIES Remember to make back-up copies or keep a written record of all important information stored in your phone. EMERGENCY CALLS Ensure the phone is switched on and in service. Press C as many times as needed to clear the display and return to the main screen. Enter the emergency number, then press Call. Give your location. Do not end the call until told to do so.

ABOUT YOUR DEVICE

The wireless device described in this guide is approved for use on the GSM network. Contact your service provider for more information about networks. When using the features in this device, obey all laws and respect privacy and legitimate rights of others. Warning: To use any features in this device, other than the alarm clock, the phone must be switched on. Do not switch the device on when wireless phone use may cause interference or danger.

NETWORK SERVICES

To use the phone you must have service from a wireless service provider. Many of the features in this device depend on features in the wireless network to function. These network services may not be available on all networks or you may have to make specific arrangements with your service provider before you can utilize network services. Your service provider may need to give you additional instructions for their use and explain what charges will apply. Some networks may have limitations that affect how you can use network services. For instance, some networks may not support all language-dependent characters and services. Your service provider may have requested that certain features be disabled or not activated in your device. If so, they will not appear on your device menu. Contact your service provider for more information.

ACCESSIBILITY SOLUTIONS

Nokia is committed to making mobile phones easy to use for all individuals, including those with disabilities. Nokia maintains an internet site that is dedicated to accessibility solutions. For more information about phone features, enhancements, alternate format user guides, and other Nokia products designed with your needs in mind, visit the web site at: www.nokiaaccessibility.com. The Nokia 1100 phone is equipped with a universal 2.5-mm accessory jack that can be used to connect any cellular ready or cellular compatible TTY/TDD device cable. Important: Once your TTY/TDD device is connected, you must use the phone menu Menu > Settings > Enhancement settings > TTY/TDD to enable the TTY/TDD mode.

Writing text

) or using
You can enter text two ways: use the traditional text input (indicated with predictive text input (indicated with ).
PREDICTIVE TEXT Set on or off
When writing text, press Options > Predictive text > English > OK. To revert to traditional text input, select Prediction off. Tip: To quickly set the predictive text input on or off when writing text, press # twice.

Use predictive text

Predictive text input is an easy way to write text. It is based on a built-in dictionary to which you can also add new words. 1 Key in the word you want by pressing each key once for one letter. The word changes after each keystroke. For example, to write Nokia when the English dictionary is selected, press 2. 2 To delete the character to the left of the cursor, press C. To clear the screen, press and hold C. To switch between upper and lowercase, or between traditional and predictive text input, press # repeatedly and check the indicator at the top of the display. To switch between letters and numbers, press and hold #. To get a list of special characters, press and hold , select the character you want, and press Use.
To insert a number, press and hold the number key you want. To insert several numbers, press and hold # and key in the numbers. To change the word, press
If the displayed word is the one you want, press 0 and start writing the next word. If the "?" is displayed after the word, the word is not in the dictionary. To add the word to the dictionary, press Spell, key in the word (using traditional text input), and press OK.
* repeatedly until the word you want appears.

Writing compound words

Key in the first half of the word, press , and key in the second half.

TRADITIONAL TEXT INPUT

Press the key marked with the letter that you want repeatedly until the letter appears. Use the following functions to edit the text: To add a space, press 0. To add a punctuation mark or special character, press 1 repeatedly, or press , select the desired character, and press Use.
To move the cursor left or right, press

, respectively.

To delete the character to the left of the cursor, press C. To clear the screen, press and hold this key. To switch between upper and lower case, press #. To add a number, press and hold the desired key. To switch between letters and numbers, press and hold #. To key in a letter which is on the same key as the previous one, press (or wait until the cursor appears), and key in the new letter. or

Menu functions

Press Menu in the standby mode. Press or to scroll to the main menu you want, and press Select to enter it. Press C to exit a main menu. If the menu contains submenus, scroll to the one you want and press Select to enter it. Press C to exit a submenu.
You can use the key features in the menus in the following ways:

SCROLLING

If you do not want to save the changes you made to menu settings, press and hold C.

SHORTCUT

The menus, submenus, and setting options are numbered. These numbers are called shortcut numbers. In the standby mode, press Menu and key in quickly, within three seconds, the shortcut number of the menu you want to access. Repeat for submenus. For example, if you want to activate Call waiting service, press Menu > 7 (for Settings), 2 (for Call settings), 4 for Call waiting service), 1 (for Activate). Note that the shortcut number for Messages is 0-1 because there are more than 10 menus.

LIST OF MENU FUNCTIONS

Messages 0-1 Contacts 2 Call log 4 Tones 5 Profiles 6 Settings 7 Alarm clock 8 Reminders 9 Games 10 Extras 11 SIM services 12 (if available)
MESSAGES (MENU 0-1) Write messages
Your Nokia 1100 phone lets you send text messages beyond the normal 160-character limit (check with your service provider to make sure their system can handle long messages). If your message exceeds 160 characters, it will be sent as a series of two to four messages. As you write the message, look in the upper right part of the screen. You can see the message length indicator counting backwards from 459. For example, 420/1means that you have used 39 characters and the message will be sent in one part. But 298/2 means that you have used 161 characters, so the message will be divided and sent in two parts. Using special (Unicode) characters, such as , , , , takes up more space. If there are special characters in your message, the indicator may not show the message length correctly. Before the message is sent, the Nokia 1100 phone tells you if the message exceeds the maximum length allowed for one message. You can cancel sending by pressing Cancel or you can save the message in the inbox. To send a message, the phone number of your message center has to be saved in the phone. See Message settings on page 16. 3 In the standby mode, press Menu > Messages > Create message. Key in the message. The number of available characters and the current part number are shown on the top right of the display. When the message is complete, press Options > Send, key in the recipients phone number, and press OK. If you want to send the message to several people, select Sending options and Send to many, scroll to the first recipient, and press Send. Repeat this for each recipient. To send a message to a predefined distribution list, select Sending options and Send to list. To define and edit distribution lists, see Distribution lists on page 15. Other options are Insert options, Use template, Small fonts, Save message, Clear text, Predictive text, Instructions, and Exit editor. Note: When sending messages using the SMS network service, your phone may display the words Message sent. This is an indication that the message has been sent by your phone to the message center number programmed into your phone. This is not an indication that the message has been received at the intended destination. For more details about SMS services, check with your service provider.

Templates

You can view or edit the preset messages (templates) that you can use for writing a message.

Smileys

You can edit and store the smileys such as ":-)", and use them in compiling messages.

Delete messages

Press Menu > Messages > Delete messages. To delete all read messages from all folders, select All read > OK. When Delete read messages from all folders? appears, press OK. To delete all the read messages in a folder, scroll to the folder and press OK. Then press OK when Delete all read messages from folder? appears.

Message settings

The phone offers two kinds of message settings: settings specific to each setting group (profile) and settings common to all text messages.
TEXT MSG (MENU 0-1-1-0-1)
This profile contains settings needed for sending text and picture messages. The settings include Message center number (get this number from your service provider), Messages sent as, Message validity, and Rename sending profile. You must have the message center number to send text and picture messages. The total number of profiles depends on how many your SIM card offers.

COMMON (MENU 0-1-1-0-2)

The settings in this submenu apply to all text messages that you send, regardless of the chosen profile. The available settings are: Delivery reports, Reply via same center and Character support. Select Character support to define how the phone handles Unicode characters in text messages. (Check with your service provider for availability.) The Full option sends all Unicode characters in a text message to a compatible phone (if supported by your network). The Reduced option tries to convert Unicode characters into the corresponding nonUnicode characters (for example to a). If no non-Unicode counterpart exists, the characters are sent unchanged.

Info service

With this network service, you can receive messages on various topics from the network. For details, contact your service provider.

Voice mailbox number

You can save and change the phone number of your voice mailbox (network service).

Service command editor

You can send service requests to your service provider. Key in the characters you want. Press and hold # to switch between letters and numbers. Press Send to send the request.

DATE SETTING

Lets you set the correct date. If the battery was removed from the phone, you may need to set the date again.
AUTO UPDATE OF DATE & TIME
This network service updates the date and time according to the current time zone. The automatic update of date and time does not change the time you have set for the alarm clock or the reminder notes. They are in local time. Updating may cause some alarms that you have set to expire without sounding.

Call settings

Call forwarding forwards incoming calls to your voice mailbox or to some other phone number (network service). Select the forwarding option you want, for example, select Forward if busy to forward the calls when you are on a call or when you reject a call. Several forwarding options may be active at the same time. When Forward all voice calls is active, appears. Set the selected option on (Activate) or off (Cancel), check whether the option is activated by selecting Check status, or specify a delay for certain diverts in Set delay (not available for all forwarding options). Automatic redial sets your phone to redial up to ten times after an unsuccessful call attempt. 1-touch dialing lets you press and hold the 1-touch dial keys (29) to dial names and phone numbers assigned to the corresponding keys. Call waiting is a network service that notifies you of a new incoming call while you have a call in progress. Press Answer to answer the waiting call and put the first call on hold. Press End to end the active call. Send my own caller ID when calling is a network service that lets your phone number appear to (Default or Yes) or be hidden from (No) the person you are calling. When you select Preset, the setting agreed with your service provider is used.

Phone settings

LanguageTo select the language for the display texts. Cell info displayTo set the phone to indicate when it is used in a cellular network based on Micro Cellular Network (MCN) technology (network service). For more information, contact your service provider. Welcome noteYou can key in a message that will be shown briefly on the display when the phone is switched on. Network selectionTo set the phone to automatically select a cellular network available in your area, or you can select the network manually. The network you select must have a roaming agreement with your home network. Confirm SIM service actionsTo set the phone to show or hide confirmation messages when you use the SIM card services [see SIM services (Menu 12) on page 26].

Enhancement settings

You can use your phone with many Nokia enhancements. However, the Enhancement settings menu appears only after an accessory has been connected to the phone at least once. You can select a default profile that will be associated with each accessory. Headset (such as the HDC-5 or HDE-2) Handsfree Car kit (such as the CARK-125 or PPH-1) Loopset (LPS-3) TTY/TDD Adapter (HDA-9)

Keyguard settings

Use Automatic keyguard to automatically lock the phone keypad after a preset time delay. The phone must be idle in the standby mode. You can also lock the keypad of the phone with Keyguard code. Select Menu > Settings > Keyguard settings > Automatic keyguard > On. When Set delay appears, key in the time and press OK. You can set the time from 10 seconds to 60 minutes. To deactivate the automatic keyguard, select Off. Select Menu > Settings > Keyguard settings > Keyguard code request, key in the security code, and press OK. After you have selected On, the phone asks for the security code every time you press Unlock. To deactivate the security keyguard, select Off. See also Lock the keypad on page 10.

Security settings

Note: When calls are restricted, calls still may be possible to the official emergency number programmed into your phone. Several types of codes are used in the phone: The security code, supplied with the phone, protects your phone against unauthorized use. The preset code is 12345. The PIN code, supplied with the SIM card, protects the card against unauthorized use. The preset code is 1234. If you enter the PIN code incorrectly three times in succession, the SIM card is blocked. You must enter the PUK code to unblock the SIM card and set a new PIN code. The PIN2 code is supplied with some SIM cards and is required to access certain services, such as charging unit counters. If you enter the PIN2 code incorrectly three times in succession, PIN2 code blocked appears on the display, and you will be asked for the PUK2 code. The PUK and PUK2 codes may be supplied with the SIM card. If this is not the case, contact your local service provider. PIN code requestYou can set your phone to ask for the PIN code of the SIM card when the phone is switched on. Some SIM cards require activating this function at all times.

Potentially explosive environments
Switch off your device when in any area with a potentially explosive atmosphere and obey all signs and instructions. Potentially explosive atmospheres include areas where you would normally be advised to turn off your vehicle engine. Sparks in such areas could cause an explosion or fire resulting in bodily injury or even death. Switch off the device at refuelling points such as near gas pumps at service stations. Observe restrictions on the use of radio equipment in fuel depots, storage, and distribution areas, chemical plants or where blasting operations are in progress. Areas with a potentially explosive atmosphere are often but not always clearly marked. They include below deck on boats, chemical transfer or storage facilities, vehicles using liquefied petroleum gas (such as propane or butane), and areas where the air contains chemicals or particles such as grain, dust or metal powders.

AIRCRAFT

FCC regulations prohibit using your wireless device while in the air. The use of wireless telephones in an aircraft may be dangerous to the operation of the aircraft, disrupt the wireless telephone network, and may be illegal. Failure to observe these instructions may lead to suspension or denial of telephone services to the offender, legal action, or both.

30 Copyright Nokia 2003

EMERGENCY CALLS
Important: Wireless phones, including this phone, operate using radio signals, wireless networks, landline networks, and user-programmed functions. Because of this, connections in all conditions cannot be guaranteed. You should never rely solely on any wireless phone for essential communications like medical emergencies. To make an emergency call: If the phone is not on, switch it on. Check for adequate signal strength. Some networks may require that a valid SIM card is properly inserted in the phone. Press C as many times as needed to clear the display and ready the phone for calls. You may need to disable any security features activated on the phone. Key in the official emergency number for your present location. Emergency numbers vary by location. Press Call.
If certain features are in use, you may first need to turn those features off before you can make an emergency call. Consult this guide or your service provider. When making an emergency call, give all the necessary information as accurately as possible. Your wireless phone may be the only means of communication at the scene of an accident. Do not end the call until given permission to do so.

CERTIFICATION INFORMATION (SAR)
THIS MODEL PHONE MEETS THE GOVERNMENT'S REQUIREMENTS FOR EXPOSURE TO RADIO WAVES. Your wireless phone is a radio transmitter and receiver. It is designed and manufactured not to exceed the emission limits for exposure to radio frequency (RF) energy set by the Federal Communications Commission of the U.S. Government. These limits are part of comprehensive guidelines and establish permitted levels of RF energy for the general population. The guidelines are based on standards that were developed by independent scientific organizations through periodic and thorough evaluation of scientific studies. The standards include a substantial safety margin designed to assure the safety of all persons, regardless of age and health. The exposure standard for wireless mobile phones employs a unit of measurement known as the Specific Absorption Rate, or SAR. The SAR limit set by the FCC is 1.6W/kg.* Tests for SAR are conducted using standard operating positions accepted by the FCC with the phone transmitting at its highest certified power level in all tested frequency bands. Although the SAR is determined at the highest certified power level, the actual SAR level of the phone while operating can be well below the maximum value. This is because the phone is designed to operate at multiple power levels so as to use only the power required to reach the network. In general, the closer you are to a wireless base station antenna, the lower the power output. Before a phone model is available for sale to the public, it must be tested and certified to the FCC that it does not exceed the limit established by the government-adopted requirement for safe exposure. The tests are performed in positions and locations (for example, at the ear and worn on the body) as required by the FCC for each model. The highest SAR value for this model phone as reported to the FCC when tested for use at the ear is.67 W/kg, and when worn on the body, as described in this user guide, is.77 W/kg. (Body-worn measurements differ among phone models, depending upon available enhancements and FCC requirements). While there may be differences between the SAR levels of various phones and at various positions, they all meet the government requirement. The FCC has granted an Equipment Authorization for this model phone with all reported SAR levels evaluated as in compliance with the FCC RF exposure guidelines. SAR information on this model phone is on file with the FCC and can be found under the Display Grant section of http://www.fcc.gov/oet/fccid after searching on FCC ID QTKRH-36.

Nokia Inc. (Nokia) warrants that this cellular phone (Product) is free from defects in material and workmanship that result in Product failure during normal usage, according to the following terms and conditions:
b) The Product has been damaged from external causes such as collision with an object, or from fire, flooding, sand, dirt, windstorm, lightning, earthquake or damage from exposure to weather conditions, an Act of God, or battery leakage, theft, blown fuse, or improper use of any electrical source, damage caused by computer or internet viruses, bugs, worms, Trojan Horses, cancelbots or damage caused by the connection to other products not recommended for interconnection by Nokia. Nokia was not advised in writing by the Consumer of the alleged defect or malfunction of the Product within fourteen (14) days after the expiration of the applicable limited warranty period. d) The Product serial number plate or the accessory data code has been removed, defaced or altered. e) The defect or damage was caused by the defective function of the cellular system or by inadequate signal reception by the external antenna, or viruses or other software problems introduced into the Product. Nokia does not warrant uninterrupted or error-free operation of the Product. If a problem develops during the limited warranty period, the Consumer shall take the following step-by-step procedure: a) The Consumer shall return the Product to the place of purchase for repair or replacement processing. b) If a is not convenient because of distance (more than 50 miles) or for other good cause, the Consumer shall ship the Product prepaid and insured to: Nokia Inc., Attn: Repair Department 795 West Nasa Blvd. Melbourne, FL 32901 c) The Consumer shall include a return address, daytime phone number and/or fax number, complete description of the problem, proof of purchase and service agreement (if applicable). Expenses related to removing the Product from an installation are not covered under this limited warranty. d) The Consumer will be billed for any parts or labor charges not covered by this limited warranty. The Consumer will be responsible for any expenses related to reinstallation of the Product. e) Nokia will repair the Product under the limited warranty within 30 days after receipt of the Product. If Nokia cannot perform repairs covered under this limited warranty within 30 days, or after a reasonable number of attempts to repair the same defect, Nokia at its option, will provide a replacement Product or refund the purchase price of the Product less a reasonable amount for usage. In some states the Consumer may have the right to a loaner if the repair of the Product takes more than ten (10) days. Please contact the Customer Service Center at Nokia at the telephone number listed at the end of this warranty if you need a loaner and the repair of the Product has taken or is estimated to take more than ten (10) days.
If the Product is returned during the limited warranty period, but the problem with the Product is not covered under the terms and conditions of this limited warranty, the Consumer will be notified and given an estimate of the charges the Consumer must pay to have the Product repaired, with all shipping charges billed to the Consumer. If the estimate is refused, the Product will be returned freight collect. If the Product is returned after the expiration of the limited warranty period, Nokias normal service policies shall apply and the Consumer will be responsible for all shipping charges.

Appendix B Message from the FDA (U.S. Food and Drug Administration) to all users of mobile phones.
July 18, 2001.For updates: http://www.fda.gov/cdrh/phones
Consumer Update on Wireless Phones U.S. Food and Drug Administration 1. Do wireless phones pose a health hazard? The available scientific evidence does not show that any health problems are associated with using wireless phones. There is no proof, however, that wireless phones are absolutely safe. Wireless phones emit low levels of radiofrequency energy (RF) in the microwave range while being used. They also emit very low levels of RF when in the stand-by mode. Whereas high levels of RF can produce health effects (by heating tissue), exposure to low level RF that does not produce heating effects causes no known adverse health effects. Many studies of low level RF exposures have not found any biological effects. Some studies have suggested that some biological effects may occur, but such findings have not been confirmed by additional research. In some cases, other researchers have had difficulty in reproducing those studies, or in determining the reasons for inconsistent results. 2. What is FDA's role concerning the safety of wireless phones? Under the law, FDA does not review the safety of radiation-emitting consumer products such as wireless phones before they can be sold, as it does with new drugs or medical devices. However, the agency has authority to take action if wireless phones are shown to emit radiofrequency energy (RF) at a level that is hazardous to the user. In such a case, FDA could require the manufacturers of wireless phones to notify users of the health hazard and to repair, replace or recall the phones so that the hazard no longer exists. Although the existing scientific data do not justify FDA regulatory actions, FDA has urged the wireless phone industry to take a number of steps, including the following: Support needed research into possible biological effects of RF of the type emitted by wireless phones; Design wireless phones in a way that minimizes any RF exposure to the user that is not necessary for device function; and Cooperate in providing users of wireless phones with the best possible information on possible effects of wireless phone use on human health. FDA belongs to an interagency working group of the federal agencies that have responsibility for different aspects of RF safety to ensure coordinated efforts at the federal level. The following agencies belong to this working group: National Institute for Occupational Safety and Health Environmental Protection Agency Federal Communications Commission Occupational Safety and Health Administration National Telecommunications and Information Administration The National Institutes of Health participates in some interagency working group activities, as well. FDA shares regulatory responsibilities for wireless phones with the Federal Communications Commission (FCC). All phones that are sold in the United States must comply with FCC safety guidelines that limit RF exposure. FCC relies on FDA and other health agencies for safety questions about wireless phones. FCC also regulates the base stations that the

6. What is FDA doing to find out more about the possible health effects of wireless phone RF? FDA is working with the U.S. National Toxicology Program and with groups of investigators around the world to ensure that high priority animal studies are conducted to address important questions about the effects of exposure to radiofrequency energy (RF). FDA has been a leading participant in the World Health Organization International Electromagnetic Fields (EMF) Project since its inception in 1996. An influential result of this work has been the development of a detailed agenda of research needs that has driven the establishment of new research programs around the world. The Project has also helped develop a series of public information documents on EMF issues. FDA and the Cellular Telecommunications & Internet Association (CTIA) have a formal Cooperative Research and Development Agreement (CRADA) to do research on wireless phone safety. FDA provides the scientific oversight, obtaining input from experts in government, industry, and academic organizations. CTIA-funded research is conducted through contracts to independent investigators. The initial research will include both laboratory studies and studies of wireless phone users. The CRADA will also include a broad assessment of additional research needs in the context of the latest research developments around the world. 7. How can I find out how much radiofrequency energy exposure I can get by using my wireless phone? All phones sold in the United States must comply with Federal Communications Commission (FCC) guidelines that limit radiofrequency energy (RF) exposures. FCC established these guidelines in consultation with FDA and the other federal health and safety agencies. The FCC limit for RF exposure from wireless telephones is set at a Specific Absorption Rate (SAR) of 1.6 watts per kilogram (1.6 W/kg). The FCC limit is consistent with the safety standards developed by the Institute of Electrical and Electronic Engineering (IEEE) and the National Council on Radiation Protection and Measurement. The exposure limit takes into consideration the bodys ability to remove heat from the tissues that absorb energy from the wireless phone and is set well below levels known to have effects. Manufacturers of wireless phones must report the RF exposure level for each model of phone to the FCC. The FCC website (http://www.fcc.gov/oet/rfsafety) gives directions for locating the FCC identification number on your phone so you can find your phones RF exposure level in the online listing. 8. What has FDA done to measure the radiofrequency energy coming from wireless phones? The Institute of Electrical and Electronic Engineers (IEEE) is developing a technical standard for measuring the radiofrequency energy (RF) exposure from wireless phones and other wireless handsets with the participation and leadership of FDA scientists and engineers. The standard, Recommended Practice for Determining the Spatial-Peak Specific Absorption Rate (SAR) in the Human Body Due to Wireless Communications Devices: Experimental Techniques, sets forth the first consistent test methodology for measuring the rate at which RF is deposited in the heads of wireless phone users. The test method uses a tissue-simulating model of the human head. Standardized SAR test methodology is expected to greatly improve the consistency of measurements made at different laboratories on the same phone.

SAR is the measurement of the amount of energy absorbed in tissue, either by the whole body or a small part of the body. It is measured in watts/kg (or milliwatts/g) of matter. This measurement is used to determine whether a wireless phone complies with safety guidelines. 9. What steps can I take to reduce my exposure to radiofrequency energy from my wireless phone? If there is a risk from these products--and at this point we do not know that there is--it is probably very small. But if you are concerned about avoiding even potential risks, you can take a few simple steps to minimize your exposure to radiofrequency energy (RF). Since time is a key factor in how much exposure a person receives, reducing the amount of time spent using a wireless phone will reduce RF exposure. If you must conduct extended conversations by wireless phone every day, you could place more distance between your body and the source of the RF, since the exposure level drops off dramatically with distance. For example, you could use a headset and carry the wireless phone away from your body or use a wireless phone connected to a remote antenna. Again, the scientific data do not demonstrate that wireless phones are harmful. But if you are concerned about the RF exposure from these products, you can use measures like those described above to reduce your RF exposure from wireless phone use. 10. What about children using wireless phones? The scientific evidence does not show a danger to users of wireless phones, including children and teenagers. If you want to take steps to lower exposure to radiofrequency energy (RF), the measures described above would apply to children and teenagers using wireless phones. Reducing the time of wireless phone use and increasing the distance between the user and the RF source will reduce RF exposure.Some groups sponsored by other national governments have advised that children be discouraged from using wireless phones at all. For example, the government in the United Kingdom distributed leaflets containing such a recommendation in December 2000. They noted that no evidence exists that using a wireless phone causes brain tumors or other ill effects. Their recommendation to limit wireless phone use by children was strictly precautionary; it was not based on scientific evidence that any health hazard exists. 11. What about wireless phone interference with medical equipment? Radiofrequency energy (RF) from wireless phones can interact with some electronic devices. For this reason, FDA helped develop a detailed test method to measure electromagnetic interference (EMI) of implanted cardiac pacemakers and defibrillators from wireless telephones. This test method is now part of a standard sponsored by the Association for the Advancement of Medical instrumentation (AAMI). The final draft, a joint effort by FDA, medical device manufacturers, and many other groups, was completed in late 2000. This standard will allow manufacturers to ensure that cardiac pacemakers and defibrillators are safe from wireless phone EMI. FDA has tested hearing aids for interference from handheld wireless phones and helped develop a voluntary standard sponsored by the Institute of Electrical and Electronic Engineers (IEEE). This standard specifies test methods and performance requirements for hearing aids and wireless phones so that no interference occurs when a person uses a compatible phone and a accompanied hearing aid at the same time. This standard was approved by the IEEE in 2000. FDA continues to monitor the use of wireless phones for possible interactions with other medical devices. Should harmful interference be found to occur, FDA will conduct testing to assess the interference and work to resolve the problem.

12. Where can I find additional information? For additional information, please refer to the following resources: FDA web page on wireless phones http://www.fda.gov/cdrh/phones/index.html Federal Communications Commission (FCC) RF Safety Program http://www.fcc.gov/oet/rfsafety International Commission on Non-Ionizing Radiation Protection http://www.icnirp.de World Health Organization (WHO) International EMF Project http://www.who.int/emf National Radiological Protection Board (UK) http://www.nrpb.org.uk/
July 18, 2001 For updates: http://www.fda.gov/cdrh/phones

Numerics

1-touch dialing 9
enhancements 26 erase call lists 18 messages 16
access codes 22 accessibility website 3 accessories 2 answering calls 10

games 24

battery charging,talk,standby times 27
imei 4 in-call operations 10 input methods 11 insert a sim card 4
calculations 24 calculator 24 call call waiting options 21 dialed calls 18 duration 19 forward 21 making calls 9 redialing 9 register 14, 18 using the phone book 9 charge the battery 5 clear call lists 18 clock settings 20 conference calling 9 countdown timer 25 covers 8 currency conversion 24
label 4 lock the keypad 10
memory status 18 menu functions 13 scrolling 13 shortcut 13 missed calls 18 model number 4
network services 2 nokia customer care phone information 4
phone label 4 phone security 22 picture messages 15 pin and pin 2 codes 22
date setting 20 delete. see erase
predictive text input 11 profiles 20 puk and puk2 codes 22
talk time 27 templates 16 timers, call 19 traditional input 12
read a text message 15 received calls 18 reminders 23
view dialed calls 18 missed calls 18 received calls 18 voice message listening to 10 voice mailbox number 17
safety instructions 1 search name and phone number 17 security code 22 settings 24 settings call 21 message 16 phone 21 restore factory 23 security 22 sim services 26 smileys 16 standby mode 7 standby time 27