ECOECO-DECLARATION

08-0108-01-2004

PRODUCT ECO-DECLARATION

Product Name: NOKIA 3108 Mass (g) 93 g Dimensions: 106x45x24 mm, 84 cc 1. ENERGY CONSUMPTION The information below is given for the following power supply: Battery: Charger: BL-4C ACP-12
The average power consumption of the battery charger: Without load / standby: < 0.3 W While charging: < 5.6 W Charging time (average) 85 min Battery: Charger: BL-4C ACP-7
The average power consumption of the battery charger: Without load / standby: < 0.6 W While charging: < 3.7 W Charging time (average) 2h 35min Nokia is a signatory of the EU Code of Conduct efficiency of external power supplies for electronic and electrical appliances. 2. MATERIAL USE The phone including battery does not contain1: Asbestos Beryllium oxide Cadmium Chloroparaffins with chain length 10-13 C atoms, chlorination greater than 50% Lead in mechanical plastic parts Mercury Ozone depleting substances, according to those categories that are already banned in the Montreal protocol Polybrominated Biphenyls (PBB) or Polybrominated Diphenyl Ethers (PBDE) in Printed Wiring Boards and mechanical parts Polychlorinated Biphenyls (PCB) or Polychlorinated Terphenyls (PCT) 3. NOKIA PACKAGING AND DOCUMENTATION The product packaging material does not contain heavy metals according to 94/62/EC. The product packaging does not contain Halogenated polymers (e.g. PVC).
In levels more than 100 PPM by weight in the phone and battery
Copyright 2002 Nokia. All rights reserved. Nokia is a registered trademark of Nokia Corporation.
The user guide is printed on non-Chlorine bleached paper. Plastic packaging material is marked according to DIN 6120, ISO 11469 and ISO 1043-1 to 4 4. BATTERY AND CHARGERS Batteries defined as hazardous in EU Directive 91/157/EC are not used in any Nokia products. The battery cell type does not contain Lead, Cadmium or Mercury. Battery type contained in sales package: Lithium Ion
Electrical cable insulation material specification: PVC 5. DISASSEMBLY AND RECYCLING RECYCLING All mechanical plastic parts have material codes in accordance with ISO 11469 and ISO 1043-1 to -4 where practical to facilitate plastics recycling. Whenever disposing of a phone, packaging or battery, please use correct local disposal methods. If required, the battery can be easily removed from the handset.
This information is based on scientific analysis and data provided by suppliers. There may be some variance in the information.