Nokia Display Car Kit CK-600 Quick Guide and Safety Information

Issue 1.1

DECLARATION OF CONFORMITY Hereby, NOKIA CORPORATION declares that this HF-23 product is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC. The product is in conformity with the limits defined in Directive 2004/104/EC (amending Directive 72/245/EEC), Annex I, paragraph 6.5, 6.6, 6.8 and 6.9. A copy of the Declaration of Conformity can be found at http://www.nokia.com/ phones/declaration_of_conformity/.
2008 Nokia. All rights reserved. Nokia, Nokia Connecting People, Navi and the Nokia Original Accessories logo are trademarks or registered trademarks of Nokia Corporation. Other product and company names mentioned herein may be trademarks or tradenames of their respective owners. Bluetooth is a registered trademark of Bluetooth SIG, Inc. Reproduction, transfer, distribution, or storage of part or all of the contents of this document in any form without the prior written permission of Nokia is prohibited. Nokia operates a policy of ongoing development. Nokia reserves the right to make changes and improvements to any of the products described in this document without prior notice. To the maximum extent permitted by applicable law, under no circumstances shall Nokia be responsible for any loss of data or income or any special, incidental, consequential or indirect damages howsoever caused. The contents of this document are provided as is. Except as required by applicable law, no warranties of any kind, either express or implied, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose, are made in relation to the accuracy, reliability or contents of this document. Nokia reserves the right to revise this document or withdraw it at any time without prior notice. The availability of particular products may vary by region. Please check with your Nokia dealer for details. Export controls This device may contain commodities, technology or software subject to export laws and regulations from the US and other countries. Diversion contrary to law is prohibited. Issue 1.1
2008 Nokia. All rights reserved.

For your safety

Read these simple guidelines. Not following them may be dangerous or illegal. Read the complete user and installation guide for further information. This product may contain small parts. Keep them out of the reach of small children.

SWITCH ON SAFELY

Do not switch the device on when wireless phone use is prohibited or when it may cause interference or danger.

ROAD SAFETY COMES FIRST

Obey all local laws. Always keep your hands free to operate the vehicle while driving. Your first consideration while driving should be road safety.

INTERFERENCE

All wireless devices may be susceptible to interference, which could affect performance.
SWITCH OFF IN RESTRICTED AREAS
Follow any restrictions. Switch the device off near fuel, chemicals, or blasting areas.

QUALIFIED SERVICE

Only qualified personnel may install or repair this product.

ACCESSORIES

Use only approved accessories. Do not connect incompatible products. When connecting to any other device, read its user guide for detailed safety instructions. Do not connect incompatible products.

Quick start

1. Quick start
Thank you for choosing the Nokia Display Car Kit CK-600. With the car kit, you can conveniently make and receive calls hands-free and listen to music from your compatible device through your car stereo system. This chapter describes the basic features of the car kit. Read carefully the complete user and installation guide on the CD-ROM that is supplied with the car kit.

Set up

1. Have the car kit installed by a qualified service technician using the original Nokia parts supplied in the sales package. For instructions, see the user and installation guide. 2. Switch on the car kit and your mobile phone or music player. 3. When you are prompted to select a language for the texts on the car kit display, turn the NaviTM wheel to scroll to the desired language, and press the wheel. 4. Activate the Bluetooth feature on your phone or music player, and set up a Bluetooth connection between the car kit and your device. 5. When you are prompted to copy the contacts from your device to the car kit, turn the Navi wheel to scroll to Yes, and press the wheel to start the copying. If you select No, you cannot use your saved contacts to make calls with the car kit.

Input device

When you use the input device to operate the music player connected to the car kit, the available music player functions are shown on the car kit display. 1. Voice dialling key Press to activate voice dialling on a compatible mobile phone when no call is in progress. 2. Mute key Press to mute or unmute the external loudspeaker in the standby mode. Press to mute or unmute the microphone during a call. Press and hold for about 2 seconds to switch a call from the car kit to the compatible device connected to it. 3. Mode key Press the mode key to switch between the standby mode and the music player menu. In the music player menu, press the mode key to start, pause, or resume music playback on the compatible music player connected to the car kit. 4. Call key Press to make or answer a call or to switch between an active call and a call on hold. Press Press 5. End key Press Press Press to end or reject a call. to delete a single character when you write text or numbers. to return to the previous menu level or display view. to return to the standby mode from the menu to view the list of last dialled numbers in the standby mode. twice to redial the last dialled number in the standby mode.
Press and hold functions.
Press and hold to switch the car kit on or off (if the car kit is not connected to the ignition system). 6. Navi wheel (hereafter referred to as wheel) Turn the wheel left or right to adjust the volume during a call or while listening to music, or to scroll through menu items. Turn the wheel left in the standby mode to enter a phone number or to use speed dialling. Turn the wheel right in the standby mode to search for a contact in Contacts. Press the wheel to perform the function shown at the bottom of the display.

Car kit installation

2. Car kit installation
For instructions on installing the car kit parts in a vehicle, refer to the user and installation guide. Observe the following safety guidelines when installing the car kit. Only a qualified service technician should install or service the car kit using the approved original Nokia parts supplied in the sales package. Faulty installation or service may be dangerous and may invalidate any warranty which may apply to the car kit. End users should remember that the car kit comprises of complex technical equipment that requires professional installation using special tools and expert know-how. Instructions given in this guide are general guidelines that apply to the installation of the car kit in an automobile. However, due to the wide variety of car types and models available on the market, this guide cannot consider the individual technical requirements relevant for any particular vehicle. Contact the vehicle manufacturer for detailed information about the vehicle in question. The car kit is suitable for use only in a vehicle with a 12-V, negative grounding. Use on other supply voltages or alternative polarity will damage the equipment. Remember that modern automotive systems include onboard computers where key vehicle parameters are stored. Improper disconnection of the car battery may cause loss of data, necessitating extensive effort for reinitialisation of the system. If you have any concerns, contact your car dealer before any installation work is done. Do not wire the car kit equipment to the high-voltage lines of the ignition system. When installing the parts of the car kit, ensure that none of them interfere with or hinder the steering or braking systems or other controls or systems used in the operation of the vehicle (for example, airbags). Ensure that the car kit and any of its components are not installed where you might come in contact with it in the event of an accident or collision. 7
If the display of a mobile device is to be used, ensure that the device is mounted in a holder and that the device display is clearly visible to the user. Your service technician or dealer may be able to provide you with information on alternatives for mounting the equipment suitably in your vehicle without requiring bore holes. Do not smoke when working on the car. Ensure that there is no source of fire or flame nearby. Take care not to cause damage to electrical cables, fuel or brake lines, or safety equipment during installation work. RF signals may affect improperly installed or inadequately shielded electronic systems in motor vehicles such as electronic fuel injection systems, electronic antiskid (antilock) braking systems, electronic speed control systems, and airbag systems. If you notice a fault or change in the operation of such a system, contact your car dealer. Ensure that cables are placed so that they will not be subject to mechanical wear and tear (for example, not laid under car seats or over sharp edges).

Integration with a car radio system
The car kit can be connected to a car radio system in three different ways. Select the appropriate option according to the parts supplied in the sales package. For information about the connectors on the hands-free unit HF-23, see the user and installation guide. You can connect the car kit to a loudspeaker with an impedance of at least 2 ohms. The optimal impedance for the car kit is 4 ohms. If the impedance is over 8 ohms, the output power is significantly lower than normal.

Use the ISO cable CA-152

When you connect the car kit to the car radio system with the ISO cable CA-152, you can select if the car kit amplifier is used for calls and the car radio amplifier is used for music, or if the car kit amplifier is used for both.
Use the car kit amplifier for calls and music
In this setup, the car radio is muted when you make or receive a call or listen to music from a connected device that supports the A2DP Bluetooth profile. The built-in amplifier of the car kit is used for calls and music played on the A2DP device.
1. To connect the ISO cable to the car radio: Unplug the appropriate cables from the car radio, and insert the ISO cable plug instead. Connect the open ends of the cables to the car radio speakers. Connect one of the wires labelled Mute 1, Mute 2, or Mute 3 on the car radio to the ISO cable. Leave the other mute wires connected as they are. Insert the power cable plug of the ISO cable to the respective connector on the hands-free unit.
Check the +12-V power pin and the ignition pin on the car radio and the respective pins of the ISO cable. If necessary, swap the pins on the fuses of the ISO cable. Plug the ISO cable to the two open ISO connectors. 2. Plug the ISO cable to the respective connector on the hands-free unit. 3. Connect the external input device CU-10 and the microphone MP-2 to the respective connectors on the hands-free unit. 4. To charge a compatible Nokia mobile phone through the car kit, connect one end of the supplied charging cable CA-134 to the hands-free unit and the other end to the 2.0 mm (0.08 inch) charging connector of the phone. 5. Switch on the car kit, press the wheel in the standby mode, and select Settings > Audio > Music output > System connector.
Use the car kit amplifier for calls and the car radio amplifier for music
In this setup, the car radio is muted when you make or receive a call.
The amplifier and equaliser of your car radio are used for music played on a connected device that supports the A2DP profile. The built-in amplifier of the car kit is used for calls.

1. To connect the ISO cable to the car radio: Unplug the appropriate cables from the car radio, and insert the ISO cable plug instead. Connect the open ends of the cables to the car radio speakers. Connect one of the wires labelled Mute 1, Mute 2, or Mute 3 on the car radio to the ISO cable. Leave the other mute wires connected as they are. Insert the power cable plug of the ISO cable to the respective connector on the hands-free unit. Check the +12-V power pin and the ignition pin on the car radio and the respective pins of the ISO cable. If necessary, swap the pins on the
fuses of the ISO cable. Plug the ISO cable to the two open ISO connectors. 2. Plug the ISO cable to the respective connector on the hands-free unit. 3. Cut the loop indicated with scissors in the figure. 4. Connect the stereo outputs of the hands-free unit to the AUX input of the car radio. Use an appropriate cable specific to your car radio (this cable is not supplied with the car kit). 5. Connect the external input device CU-10 and the microphone MP-2 to the respective connectors on the hands-free unit. 6. To charge a compatible Nokia mobile phone through the car kit, connect one end of the supplied charging cable CA-134 to the hands-free unit and the other end to the 2.0 mm (0.08 inch) charging connector of the phone. 7. Switch on the car kit, press the wheel in the standby mode, and select Settings > Audio > Music output > Automatic detection.
Use the power cable CA-153P
In this setup, the car radio is muted when you make or receive a call. The loudspeaker SP-3 is used for calls, and the amplifier and equaliser of your car radio are used for music played on a connected device that supports the A2DP Bluetooth profile.
1. Connect the respective wires of the power cable CA-153P to the car battery and ignition sense (if available). Connect the car radio mute wire (if available) to the car radio. 2. Plug the power cable to the respective connector on the hands-free unit. 3. Connect the loudspeaker SP-3 to the respective connector on the handsfree unit. 4. Connect the stereo outputs of the hands-free unit to the AUX input of the car radio. Use an appropriate cable specific to your car radio (this cable is not supplied with the car kit). 5. Connect the external input device CU-10 and the microphone MP-2 to the respective connectors on the hands-free unit. 6. To charge a compatible Nokia mobile phone through the car kit, connect one end of the supplied charging cable CA-134 to the hands-free unit and the other end to the 2.0 mm (0.08 inch) charging connector of the phone. 7. Switch on the car kit, press the wheel in the standby mode, and select Settings > Audio > Music output > Automatic detection. Alternatively, if the music is to be played back through an external loudspeaker (such as the SP-3), select Mono speaker instead of Automatic detection. Do not use the internal amplifier of the hands-free unit to drive external loudspeakers to play back music. If you need to replace a fuse on the CA-153P cable, only use a fuse with a rating of 2 A or less.

Care and maintenance

Your car kit is a product of superior design and craftmanship and should be treated with care. The following suggestions will help you protect your warranty coverage. Keep the car kit dry. Precipitation, humidity and all types of liquids or moisture can contain minerals that will corrode electronic circuits. Do not use or store the car kit in dusty, dirty areas. Its moving parts and electronic components can be damaged. Do not attempt to open the car kit. Do not use harsh chemicals, cleaning solvents, or strong detergents to clean the car kit parts. Do not paint the car kit parts. Paint can clog the moving parts and prevent proper operation. If the car kit is not working properly, take the defective part to your nearest authorised service facility for service.
Additional safety information

Vehicles

RF signals may affect improperly installed or inadequately shielded electronic systems in motor vehicles such as electronic fuel injection systems, electronic antiskid (antilock) braking systems, electronic speed control systems, and air bag systems. For more information, check with the manufacturer or its representative of your vehicle or any equipment that has been added. Faulty installation or service may be dangerous and may invalidate any warranty that may apply to the device. Check regularly that all wireless device equipment in your vehicle is mounted and operating properly. Do not store or carry flammable liquids, gases, or explosive materials in the same compartment as the device, its parts, or accessories. For vehicles equipped with an air bag, remember that air bags inflate with great force. Do not place objects, including installed or portable wireless equipment in the area over the air bag or in the air bag deployment area. If in-vehicle wireless equipment is improperly installed and the air bag inflates, serious injury could result.

Nokia Display Car Kit CK-600 Product Sheet
Product overview Nokia Display Car Kit CK-600 offers seamless handsfree and music connectivity at a glance. The new detachable color display and the stylish input device make it easy, safe and convenient to access all key functions. Wherever you are enjoy broad compatibility, ease of use and excellent audio quality.
Key Selling Points Convenient handsfree & music: Excellent audio quality thanks to internal DSP (Digital Signal Processing) Fast access your contacts with automatic synchronization* and predictive search Listen to your music via Bluetooth wireless technology Convenient handling: Real multi-compatibility thanks to Bluetooth wireless technology supporting Bluetooth specification 2.0 Keep thieves away the removable 2.2 inch color display Stylish remote control with illuminated keys for convenient control of the car kits functions Allows for software updates via mini-USB connector New simplified installation concept through ISO cable, internal mute relays and motion sensor for shorter installation times Added Bonus: Charging cable (2mm) to keep your compatible Nokia mobile device powered
* with compatible mobile phone
2008 Nokia. All rights reserved. Nokia, Nokia Connecting People and Navi are trademarks or registered trademarks of Nokia Corporation. Bluetooth is a registered trademark of Bluetooth SIG, Inc. Specifications are subject to change without notice. The availability of particular products and services may vary by region. Check with the Nokia dealer nearest to you. Many jurisdictions have laws regarding the use of a phone in a vehicle environment. Obey all local laws. Your first consideration while driving should be road safety. Always keep your hands free to operate the vehicle while driving. The Nokia Car kit CK-600 should be installed by a qualified professional.
Standard Sales Package Content Display SU-34 with display stand HH-18, display plate HH-19 and display system cable CA-140 External input device CU-10 Microphone MP-2 Charging cable 2mm connector CA-134 Hands-free unit HF-23 ISO system cable CA-135 Pouch Quick guide CD with user and installation guide Key Features Multi-compatible Bluetooth car kit supporting Bluetooth specification 2.0 and lower Supporting Bluetooth Handsfree Profile 1.5, Advanced Audio Distribution Profile 1.0, Audio Video Remote Control Profile 1.0 and Phonebook Access Profile 1.0
Connectivity Supported mobile devices interfaces: Bluetooth Specification 2.0 with HFP v. 1.5, PBAP v. 1.0, A2DP v. 1.0, AVRCP v. 1.0 2mm charging connector for compatible Nokia mobile devices Car Connectivity car battery IGNS (only of available) car loudspeakers (optional) car radio mute (only if available) standard cinch connectors for stereo music out (only if AUX input is available) Other Connectivity mini-USB connector to update software
2.2 inch detachable and flat mountable color display Optimized user interface and improved options, e.g. contact sort order, menu rotation and new color theme Input device with five illuminated keys and Navi wheel Automatic synchronization of phonebook* Memory stores up to 3,000 single contacts Up to two users can store their phonebook at the same time adding up to 6,000 single contacts in total New predictive search function for contacts Wireless play-back of music via Bluetooth A2DP Five predefined audio equalizer settings Updateable software via mini-USB connector New simplified installation concept with ISO cable, internal relays and motion sensor Charging of Nokia mobile phones (2mm connector)