Reviews & Opinions
Independent and trusted. Read before buy Nokia Wireless Audio Headset HS-26W!

Nokia Wireless Audio Headset HS-26W Manual

Preview of first few manual pages (at low quality). Check before download. Click to enlarge.
Manual - 1 page  Manual - 2 page  Manual - 3 page 

Download (English)
Nokia Wireless Audio Headset HS-26W, size: 478 KB
Instruction: After click Download and complete offer, you will get access to list of direct links to websites where you can download this manual.


Nokia Wireless Audio Headset HS-26WAbout Nokia Wireless Audio Headset HS-26W
Here you can find all about Nokia Wireless Audio Headset HS-26W like manual and other informations. For example: review.

Nokia Wireless Audio Headset HS-26W manual (user guide) is ready to download for free.

On the bottom of page users can write a review. If you own a Nokia Wireless Audio Headset HS-26W please write about it to help other people.
[ Report abuse or wrong photo | Share your Nokia Wireless Audio Headset HS-26W photo ]

User reviews and opinions

Comments to date: 3. Page 1 of 1. Average Rating:
doreeena 9:34pm on Thursday, November 4th, 2010 
Works Great but No Bass After 3 pairs of the motorola S9 (they all died from sweat i guess.
luminousnerd 5:27am on Friday, April 30th, 2010 
just bought this earpice from frys electronic and guess what i am bringing it back, spend $79.99 and I havent had any joy out of it yet.
ReCop17 2:29am on Sunday, April 18th, 2010 
Variable Quality/Variable Uses Like many here, I was disappointed in the quality of the sound. I have tried using the headphones mostly in the car. Bluetooth Headphones Two issues with this product. One is the design, you can not wear these headphones with a beanie cap. Junk Had for 2 1/2 months - the design is terrible when running to start. Not very loud.

Comments posted on are solely the views and opinions of the people posting them and do not necessarily reflect the views or opinions of us.




Nokia N91 Data Sheet
Planned Market Introduction: April 2006 Category: Multimedia Technical Profile: System: User Interface: Dimensions: Weight: Standby time: Talk time: Display: Battery:
GSM/GPRS/900/1800/1900 + WCDMA, EDGE S60 3rd Edition 113.1 x 55.2 x 22mm (L x W x T) 164g GSM up to 190 hours WCDMA up to 170 hours GSM up to 3-4 hours WCDMA up to 2.hours 176 x 208, 262k color BL-5C, 970, mAh, Li-Ion
Key Features: Memory capacity for up to 30001 tracks (4GB) Optimized, easy to use integrated music player: Music collection management and playlist editing in device Dedicated music control hard keys, side volume key, and lock switch A high-fidelity 3.5mm stereo headset with voice call and music playback remote control Additional Features: Nokia Nseries range of smartphone functions including email, video, audio and content download with WLAN Up to 10 hours of music playback (offline) Digital music player with support for MP3, AAC, AAC+, eAAC+, WAV, WMA, M4A and Real 8 band graphic equalizer Stereo widening Easy transfer/synchronization of music files between compatible PC and device PC application to manage downloads, music files, synchronization Stereo FM Radio playback including Visual Radio functionality Connectivity: 3.5mm connector for audio, headphone and remote control USB (Mass Storage Profile for drag and drop) Bluetooth wireless technology and WLAN 802.11b/g/I
Standard Sales Package includes: Nokia N91 Battery BL-5C and Travel Charger AC-4 3.5mm Stereo Headset with Remote Control HS-28 Deskstand DT-10 Audio Cable CA-72U (APAC, China, Americas) USB Data Cable DKE-2 Charger Adapter Cable CA-44 (EMEA, Americas) User Guide, Quick Start Guide and Application Leaflets CD-ROM (contains PC Suite) Camera: Resolution of images: 1600 x 1200 (default), 640 x 480 Resolution of videos: 176 x 144, 128 x 96, 352 x 268 Streaming & Video capture: Digital Stepless 20x Zoom Data Services: WCDMA: EGPRS: Maximum download 384 kbps; upload 128 kbps (Class B, multislot class 10): Maximum download 236.8 kbps; upload 118.4 kbps H.263, 3GPP, Real
Key Enhancements: Headsets: Nokia Wireless Headset HS-26W Car Solutions: Nokia Advanced Car Kit CK-7W Inbox Colors available: Light chrome Dark gray chrome
Capacity based on 3:45 per song and 48 kbps eAAC+ encoding. Capacity with 128 kbps AAC encoding is up to 1000 songs.
Copyright 2006 Nokia. All rights reserved. of Nokia Company Confidential Nokia and Nokia Connecting People are registered trademarksmentioned Corporation.Bluetooth is a registered trademark of Bluetooth SIG, Inc. Other product and company names herein may be trademarks or tradenames of their respective owners. Specifications are subject to change without notice. The availability of particular products may vary by region. Variation in operation times will occur depending on SIM card, network and usage settings, usage style and
1 environments. Services and some V1-Filename.ppt / yyyy-mm-dd and/or SIM card as well as on the 2005 Nokia features may be dependent on the network / compatibility of the devices used and the content formats supported. Initials


Get connected

Use your device on the 2G and 3G networks. See About your device, p. vi. Use Bluetooth technology, for example, to transfer files and connect to compatible enhancements. See Bluetooth connectivity, p. 83. Use infrared to transfer and synchronize data between compatible devices, for example. See Infrared connection, p. 87. Use Nokia Connectivity Cable CA-53 (provided in the standard sales package) to connect to compatible devices, such as printers and PCs. See Data cable, p. 87. Use Nokia miniSD card to transfer data or back up information, for example. See Memory card tool, p. 4.
Model number: Nokia N73-1 Music Edition Hereinafter referred to as Nokia N73. If a function described in this guide is available only in the original edition of the Nokia N73 or Nokia N73 Music Edition, this is indicated in the section describing that function by referring to the Nokia N73 (original edition) or Nokia N73 Music Edition. Check the sales box of your device to see if your device is the original Nokia N73 or Nokia N73 Music Edition.
operator information. You may have settings from your service providers already installed in your device, or you may receive the settings from the service providers as a special text message.
Transfer content from another device
You can transfer content, such as contacts, free of charge from a compatible Nokia device to your Nokia N73 using Bluetooth connectivity or infrared. The type of content that can be transferred depends on the phone model. If the other device supports synchronization, you can also synchronize data between the other device and your Nokia N73. Copyright protections may prevent some images, music (including ringing tones), and other content from being copied, modified, transferred or forwarded. You can insert your SIM card in the other device. When Nokia N73 is switched on without a SIM card, the offline profile is automatically activated.

Charge the battery

1 Connect a compatible charger to a wall outlet. 2 Connect the power cord to the device. If the battery is
completely discharged, it may take a while before the charging indicator starts scrolling. 3 When the battery is fully charged, disconnect the charger from the device, then from the wall outlet.


Your Nokia N73 normally has MMS, GPRS, streaming, and mobile Internet settings automatically configured in the device, based upon your service provider or network

Your Nokia N73

Transfer content 1 To use the application for the first time, press , and select Tools > Transfer. If you have used the application before and want to start a new transfer, select Transfer data. In the information view, select Continue. 2 Select whether you want to use Bluetooth connectivity or infrared to transfer the data. Both devices must support the selected connection type. 3 If you select Bluetooth connectivity: To have Nokia N73 search for devices with Bluetooth connectivity, select Continue. Select your other device from the list. You are asked to enter a code on your Nokia N73. Enter a code (1-16 digits), and select OK. Enter the same code on the other device, and select OK. The devices are now paired. See Pair devices, p. 86. For some phone models, the Data transfer application is sent to the other device as a message. To install Data transfer on the other device, open the message, and follow the instructions on the display. If you select infrared, connect the two devices. See Infrared connection, p. 87. 4 From your Nokia N73, select the content you want to transfer from the other device. Content is transferred from the memory of the other device to the corresponding location in your Nokia N73. Transferring time depends on the amount of data to be

Many features of the device, such as contacts, messages, images, videos, ringing tones, calendar notes, documents, and downloaded applications, use memory to store data. The free memory available depends on how much data is already saved in the device memory. You can use a compatible memory card as extra storage space. Memory cards are rewritable, so you can delete old information and save new data on a memory card.

Set a password

To set a password to protect your memory card, select Options > Set password. You can use up to 8 characters in the password.
device, and data stored on the incompatible card may be corrupted.
To change the password, select Options > Change password.
To browse files and folders in the device memory or on a memory card (if inserted), press , and select Tools > File mgr. The device memory view ( ) opens. Press to open the memory card view ( ), if available. To move or copy files to a folder, press and at the same time to mark a file, and select Options > Move to folder or Copy to folder. To find a file, select Options > Find and the memory from which to search, and enter a search text that matches the file name.
Tip! You can use Nokia Phone Browser available in Nokia PC Suite to view the different memories in your device and transfer data. To remove data to free memory, use File manager, or go to the respective application. For example, you can remove the following: Messages from Inbox, Drafts, and Sent folders in Messag. Retrieved e-mail messages from the device memory Saved Web pages Saved images, videos, or sound files Contact information Calendar notes Downloaded applications. See also Application manager, p. 109. Installation files (.sis) of applications you have installed to a compatible miniSD card; first back up the installation files to a compatible PC using Nokia PC Suite Any other data that you no longer need

View memory consumption

To view what types of data you have in the device and how much memory the different data types consume, select Options > Memory details. The amount of available free memory is shown in Free memory.

or Multimedia message 0.3M (640x480 resolution). The better the image quality, the more memory the image consumes. If you want to print the image, select Print 3M - Large, Print 2M - Medium, or Print/e-mail 0.8M Small. If you want to send it through e-mail, select Print/ e-mail 0.8M - Small. To send the image through MMS, select Multimedia message 0.3M. These resolutions are only available in the main camera. Add to albumSelect whether you want to save the image to a certain album in the gallery. If you select Yes, a list of available albums opens. Show captured imageSelect On if you want to see the captured image after it is taken, or Off if you want to continue taking pictures immediately. Default image nameDefine the default name for the captured images. Extended digital zoom (main camera only)Select On to allow the zoom increments to be smooth and continuous between digital and extended digital zoom. If you want to limit the zoom to where the selected image quality is maintained, select Off. Capture toneSelect the tone you want to hear when you take a picture. Memory in useSelect where to store your images.
Still image camera settings
There are two kinds of settings for the still image camera: Image setup and main settings. To adjust Image setup, see Setup settingsAdjust color and lighting, p. 13. The setup settings return to the default settings after you close the camera, but the main settings remain the same until you change them again. To change the main settings, select Options > Settings and from the following: Image qualityPrint 3M - Large-Large (2048x1536 resolution), Print 2M - Medium (1600x1200 resolution), Print/e-mail 0.8M - Small (1024x768 resolution),
The flash is available only in the main camera. Keep a safe distance when using the flash. Do not use the flash on people or animals at close range. Do not cover the flash while taking a picture. The camera has an LED flash for low light conditions. The following flash modes are available for the still image camera: Automatic ( ), Red eye reduct. ( ), On ( ), and Off ( ). To change the flash mode, in the active toolbar, select the desired flash mode.
Colour toneSelect a color effect from the list. Light sensitivity (images only)Select the light sensitivity of the camera. The darker the environment, the higher the light sensitivity should be. The screen display changes to match any settings you make, so that you see how the change affects the pictures or videos. The available settings vary depending on the selected camera. The setup settings affect both the cameras; if you change the settings in the secondary camera, the settings in the main camera change too. The setup settings return to the default settings when you close the camera. If you select a new scene, the color and lighting settings are replaced by the selected scene. See Scenes, p. 13. You can change the setup settings after selecting a scene if needed.

Press , and select Messag. (network service). In Messaging, you can create, send, receive, view, edit, and organize text messages, multimedia messages, e-mail messages, and special text messages containing data. You can also receive Web service messages, cell broadcast messages, and send service commands. Messages and data received using Bluetooth connectivity or infrared are received in the Inbox folder in Messaging. To create a new message, select New message. Only devices that have compatible features can receive and display multimedia messages. The appearance of a message may vary depending on the receiving device. Messaging contains the following folders: InboxReceived messages, except e-mail and cell broadcast messages, are stored here. E-mail messages are stored in the Mailbox. My foldersOrganize your messages into folders. Tip! To avoid rewriting messages that you send often, use texts in the templates folder. MailboxConnect to your remote mailbox to retrieve your new e-mail messages or view your previously retrieved e-mail messages offline. See E-mail, p. 60. DraftsDraft messages that have not been sent are stored here. SentThe last 20 messages that have been sent, excluding messages sent using Bluetooth connectivity or infrared, are stored here. To change the number of messages to be saved, see Other settings, p. 63. OutboxMessages waiting to be sent are temporarily stored here. Example: Messages are placed in the outbox, for example, when your device is outside network coverage. You can also schedule e-mail messages to be sent the next time you connect to your remote mailbox. ReportsYou can request the network to send you a delivery report of the text messages and multimedia messages you have sent (network service). Receiving a delivery report of a multimedia message that has been sent to an e-mail address may not be possible. Tip! When you have opened any of the default folders, to switch between the folders, press or.
Cell broadcast (network service) allows you to receive messages on various topics, such as weather or traffic conditions, from your service provider. For available topics and relevant topic numbers, contact your service provider. In the main view of Messaging, select Options > Cell broadcast. In the main view, you can see the status of a topic, a topic number, name, and whether it has been flagged ( ) for follow-up. Cell broadcast messages cannot be received in UMTS networks. A packet data connection may prevent cell broadcast reception.
is displayed when you write text using traditional text input. Press a number key ( ) repeatedly until the desired character appears. There are more characters available for a number key than are printed on the key. If the next letter is located on the same key as the present one, wait until the cursor appears (or press to end the time-out period), and enter the letter. To insert a space, press. To move the cursor to the next line, press three times.

To delete the contents of an e-mail message from the device while still retaining it in the remote mailbox, select Options > Delete. In Delete msg. from:, select Phone only. The device mirrors the e-mail headings in the remote mailbox. Although you delete the message content, the e-mail heading stays in your device. If you want to remove the heading as well, you must first delete the e-mail message from your remote mailbox, and then make a connection from your device to the remote mailbox again to update the status. To delete an e-mail from the device and the remote mailbox, select Options > Delete. In Delete msg. from:, select Phone and server.
Disconnect from the mailbox
When you are online, to end the data connection to the remote mailbox, select Options > Disconnect.
View messages on a SIM card
Before you can view SIM messages, you must copy them to a folder in your device. 1 In the Messaging main view, select Options > SIM messages. 2 Select Options > Mark/Unmark > Mark or Mark all to mark messages. 3 Select Options > Copy. A list of folders opens. 4 To start copying, select a folder and OK. To view the messages, open the folder.
Fill in all fields marked with Must be defined or with a red asterisk. Follow the instructions given by your service provider. You may also obtain settings from your service provider in a configuration message. Some or all message centers or access points may be preset for your device by your service provider or network operator, and you may not be able to change, create, edit, or remove them.
Message sent asChange this option only if you are sure that your message center is able to convert text messages into these other formats. Contact your network operator. Preferred conn.Select the connection used for sending text messages: GSM network or packet data, if supported by the network. See Connection, p. 101. Reply via same ctr.Select whether you want the reply message to be sent using the same text message center number (network service).

Text messages

Press , and select Messag. > Options > Settings > Text message and from the following: Message centresView a list of all text message centers that have been defined. Msg. centre in useSelect which message center is used to deliver text messages. Character encoding To use character conversion to another encoding system when available, select Reduced support. Receive reportSelect whether the network sends delivery reports on your messages (network service). Message validitySelect how long the message center waits to resend your message if the first attempt fails
Press , and select Messag. > Options > Settings > Multimedia message and from the following: Image sizeDefine the size of the image in a multimedia message: Original (shown only when the MMS creation mode is set to Guided or Free), Small, or Large. MMS creation mode If you select Guided, the device informs you if you try to send a message that may not be supported by the recipient. Select Restricted; the device prevents you from sending messages that may not be supported.

To delete a contact card in Contacts, select a card, and press. To delete several contact cards at the same time, press and to mark the contacts, and press to delete.
To copy names and numbers from a SIM card to your device, press , and select Contacts > Options > SIM contacts > SIM directory. Select the names you want to copy and Options > Copy to Contacts. To copy contacts to your SIM card, press , and select Contacts. Select the names you want to copy and Options > Copy to SIM direct., or Options > Copy > To SIM directory. Only the contact card fields supported by your SIM card are copied. Tip! You can synchronize your contacts to a compatible PC with Nokia PC Suite.
Default numbers and addresses
You can assign default numbers or addresses to a contact card. In this way if a contact has several numbers or addresses, you can easily call or send a message to the contact to a certain number or address. The default number is also used in voice dialing. 1 In Contacts, select a contact, and press. 2 Select Options > Defaults. 3 Select a default to which you want to add a number or an address, and select Assign. 4 Select a number or an address you want to set as a default. The default number or address is underlined in the contact card.
SIM directory and other SIM services
For availability and information on using SIM card services, contact your SIM card vendor. This may be the service provider, network operator, or other vendor. Press , and select Contacts > Options > SIM contacts > SIM directory to see the names and numbers stored on the SIM card. In the SIM directory you can add, edit, or copy numbers to contacts, and you can make calls. To view the list of fixed dialing numbers, select Options > SIM contacts > Fixed dialling contacts. This setting is only shown if supported by your SIM card.
Tip! To check to which groups a contact belongs, scroll to the contact, and select Options > Belongs to groups.

Copy contacts

To restrict calls from your device to selected phone numbers, select Options > Activ. fixed dialling. You need your PIN2 code to activate and deactivate fixed dialing or edit your fixed dialing contacts. Contact your service provider if you do not have the code. To add new numbers to the fixed dialing list, select Options > New SIM contact. You need the PIN2 code for these functions. When you use Fixed dialling, packet data connections are not possible, except when sending text messages over a packet data connection. In this case, the message center number and the recipients phone number must be included on the fixed dialing list. When fixed dialing is activated, calls may be possible to the official emergency number programmed into your device.

Share live video and video clips
To receive a sharing session, the device of the recipient must support Video sharing and the recipient must configure the required settings on their compatible mobile device. You and the recipient must both be registered to the service before you can start sharing.

Live video

1 When a voice call is active, select Options > Share 2
video > Live, and open the slide. Your device sends the invitation to the SIP address you have added to the contact card of the recipient. If the recipient has several SIP addresses in the contact card, select the SIP address to which you want to send the invitation, and Select to send the invitation. If the SIP address of the recipient is not available, enter a SIP address. Select OK to send the invitation. If you do not know a SIP address for the contact, enter the phone number of the recipient including the country code, if it is not already saved in the Contacts. Sharing begins automatically when the recipient accepts the invitation. The loudspeaker is active. You can also use a compatible headset for the voice call. Select Pause to pause the sharing session. Select Continue to resume sharing. To end the sharing session, select Stop. To end the voice call, press the end key.

Video clip

1 When a voice call is active, select Options > Share
video > Clip. A list of video clips saved on the device memory or compatible memory card opens. Select a video clip you want to share. A preview view opens. To preview the clip, select Options > Play. Select Options > Invite. You may need to convert the video clip into a suitable format to be able to share it. Clip must be converted for sharing. Continue? appears. Select OK. The phone sends the invitation to the SIP address you have added to the contact card of the recipient. If the recipient has several SIP addresses in the contact card, select the SIP address to which you want to send the invitation, and Select to send the invitation. If the SIP address of the recipient is not available, enter a SIP address. Select OK to send the invitation. If you do not know a SIP address for the contact, enter the phone number of the recipient including the country code, if it is not already saved in the Contacts. Sharing begins automatically when the recipient accepts the invitation. Select Pause to pause the sharing session. Select Options > Continue to resume sharing. To fast forward or rewind the video clip, scroll up or down. To play the clip again, press Play.

Call duration

To monitor the approximate duration of your incoming and outgoing calls, press , and select Applications > Log > Call duration. To set the display of the call timers while a call is active, select Applications > Log > Options > Settings > Show call duration > Yes or No. Note: The actual time invoiced for calls by your service provider may vary, depending on network features, rounding off for billing, and so forth. To clear call duration timers, select Options > Clear timers. For this you need the lock code. See Phone and SIM, p. 104.
To monitor the phone numbers of missed, received, and dialed voice calls, press , and select Applications > Log > Recent calls. The device registers missed and received calls only if the network supports these functions, the device is switched on, and within the network service area. To clear all recent call lists, select Options > Clear recent calls in the recent calls main view. To clear one of the call registers, open the register you want to erase, and select

Packet data

To check the amount of data sent and received during packet data connections, press , and select Applications > Log > Packet data. For example, you may be charged for your packet data connections by the amount of data sent and received.
Options during a video call
Options > Clear list. To clear an individual event, open a register, scroll to the event, and press.
Monitor all communication events
Icons in Log: Incoming Outgoing Missed communication events To monitor all voice calls, text messages, or data connections registered by the device, press , select Tools > Log, and scroll right to open the general log. For each communication event, you can see the sender or recipient name, phone number, name of the service provider, or access point. You can filter the general log to view just one type of event, and create new contact cards based on the log information. Tip! To view a list of sent messages, press and select Messag. > Sent. ,
To add an unknown phone number from Log to your contacts, select Options > Add to contacts. To filter the log, select Options > Filter and a filter. To erase the contents of the log, recent calls register, and messaging delivery reports permanently, select Options > Clear log. Select Yes to confirm. To set the Log duration, select Options > Settings > Log duration. The log events remain in the device memory for a set number of days after which they are automatically erased to free memory. If you select No log, all the log contents, recent calls register, and messaging delivery reports are permanently deleted. To view the details of a communication event, in the general log view scroll to an event, and press. Tip! In the details view you can copy a phone number to the clipboard, and paste it to a text message, for example. Select Options > Copy Number. Packet data counter and connection timer: To view how much data, measured in kilobytes, is transferred and how long a certain packet data connection lasts, scroll to an incoming or outgoing event indicated by Pack., and select Options > View details.

To open Quickword, Quicksheet, or Quickpoint, press to reach the desired view.


With Quickword, you can view native Microsoft Word documents on the display of your device. Quickword supports colors, bold, italics, and underline.
To move around in the spreadsheet, use the scroll key. To switch between worksheets, select Options > Pan. To search the speadsheet for a text within a value or formula, select Options > Find. To change how the spreadsheet is displayed, select Options and from the following: Zoomto zoom in or out Freeze panesto keep the highlighted row, column, or both visible while you move in the spreadsheet Resizeto adjust the size of columns or rows
To view the presentation in full screen, select Options > Full screen. To expand items in the presentation outline in the outline view, select Options > Outline > Expand entry.

More information

If you experience problems with Quickword, Quicksheet, or Quickpoint, visit for more information. Support is also available by sending an e-mail to


With Quickpoint, you can view Microsoft PowerPoint presentations on the display of your device. Quickpoint supports the viewing of presentations created in.ppt format from Microsoft PowerPoint 2000 or later. Not all variations or features of the mentioned file formats are supported. See also More information, p. 93.

Adobe Reader

With Adobe Reader you can read PDF documents on the display of your device. This application has been optimized for PDF document content on handsets and other mobile devices, and provides only a limited set of features compared with PC versions.

View presentations

To move between the slide, outline, and the notes view, press or.

View spreadsheets

To move to the next or previous slide in the presentation, press or.
To access and open documents: Press , and select Office > Adobe PDF. Select Options > Browse for file to browse and open documents stored in the device memory and on a compatible memory card. Open an e-mail attachment from received e-mail messages (network service). Send a document using Bluetooth connectivity to your Inbox in Messaging. Use File manager to browse and open documents stored in the device memory and on the memory card. Browse Web pages. Ensure your device is set up with an Internet access point before browsing. See Access points, p. 102.

View PDF files

When a PDF file is open, select Options and one of the following: Zoomto zoom in, out, or to a selected percentage. You can also resize the document to the screen width, or fit the whole PDF page to the screen. Findto search the document for a text. Viewto view the document in full screen. You can also rotate the PDF document by 90 degrees in either direction. Go toto move to a selected page, next page, previous page, first page, or last page. Saveto save the file to device memory or a compatible memory card. Settingsto modify default zoom level and default viewing mode. Detailsto display the properties of the PDF document.


Phone languageChanging the language of the display texts in your device also affects the format used for date and time and the separators used, for example, in calculations. Automatic selects the language according to the information on your SIM card. After you change the display text language, the device restarts. Changing the settings for Phone language or Writing language affects every application in your device, and the

Standby mode

Active standbyUse shortcuts to applications in the standby mode. See Active standby mode, p. 98. Left selection keyAssign a shortcut to the left selection key ( ) in the standby mode.
Right selection keyAssign a shortcut to the right selection key ( ) in the standby mode. Active standby apps.Select the application shortcuts you want to appear in the active standby. This setting is only available if Active standby is on. You can also assign keypad shortcuts for the different presses of the scroll key. The scroll key shortcuts are not available if the active standby is on. Operator logoThis setting is only available if you have received and saved an operator logo. Select Off if you do not want the logo to be shown.

Call settings

Send my caller IDYou can set your phone number to be displayed to (Yes) or hidden from (No) the person to whom you are calling, or the value may be set by your network operator or service provider when you make a subscription (Set by network) (network service). Call waitingIf you have activated call waiting (network service), the network notifies you of a new incoming call while you have a call in progress. Set the function on (Activate) or off (Cancel), or check whether the function is activated (Check status). Reject call with SMSSelect Yes to send a text message to a caller informing why you could not answer the call. See Answer or decline a call, p. 73. Message textWrite a text to be sent in a text message when you reject a call. Image in video callIf video is not sent during a video call, you can select a still image to be displayed instead. Automatic redialSelect On, and your device makes a maximum of 10 attempts to connect the call after an unsuccessful call attempt. To stop automatic redialing, press.


Light sensorPress or to change the light sensor mode, and to brighten or darken the display. Power saver time-outSelect the time-out period after which the power saver is activated. Sleep modeSelect whether the display is switched off to save battery power 20 minutes after the power saver is activated. When the display is switched off, a LED blinks to indicate that the device is powered on. Light time-outSelect a time-out after which the backlight of the display is switched off.

Summary after callActivate this setting if you want the device to briefly display the approximate duration of the last call. Speed diallingSelect On, and the numbers assigned to the speed dialing keys ( ) can be dialed by pressing and holding the key. See also Speed dial a phone number, p. 68. Anykey answerSelect On, and you can answer an incoming call by briefly pressing any keypad key, except , , , and. Line in useThis setting (network service) is shown only if the SIM card supports two subscriber numbers, that is, two phone lines. Select which phone line you want to use for making calls and sending text messages. Calls on both lines can be answered irrespective of the selected line. If you select Line 2 and have not subscribed to this network service, you will not be able to make calls. When line 2 is selected, is shown in the standby mode. Tip! To switch between the phone lines, press and hold in the standby mode. Line changeTo prevent line selection (network service), select Disable if supported by your SIM card. To change this setting, you need the PIN2 code.
Data connections and access points
Your device supports packet data connections (network service), such as GPRS in the GSM network. When you use your device in GSM and UMTS networks, multiple data connections can be active at the same time, and access points can share a data connection. In the UMTS network, data connections remain active during voice calls. To establish a data connection, an access point is required. You can define different kinds of access points, such as: MMS access point to send and receive multimedia messages Access point for the Web application to view WML or XHTML pages Internet access point (IAP) to send and receive e-mail and connect to the Internet Check the type of access point you need with your service provider for the service you want to access. For availability and subscription to packet data connection services, contact your network operator or service provider.


Access points
You may receive access point settings in a message from a service provider. See Data and settings, p. 56. Some or all access points may be preset for your device by your service provider or network operator, and you may not be able to change, create, edit, or remove them. indicates a protected access point, and indicates a packet data access point. To create a new access point, select Options > New access point. Select Use default settings to use the default access point settings, or Use existing settings to select an existing access point as the basis for the new access point. To edit the settings of an access point, select Options > Edit. Follow the instructions from your service provider. Connection nameEnter a descriptive name for the connection. Data bearerSelect the data connection type. Depending on the data connection you select, only certain setting fields are available. Fill in all fields marked with Must be defined or with a red asterisk. Other fields can be left empty, unless you have been instructed otherwise by your service provider. To be able to use a data connection, the network service provider must support this feature, and if necessary, activate it for your SIM card.

Voice commands

You can use voice commands to control your device. For more information about the enhanced voice commands supported by your device, see Voice dialing, p. 68. To activate enhanced voice commands for starting applications and profiles, you must open the Voice comm. application and its Profiles folder. Press , and select Tools > Voice cm. > Profiles; the device creates voice tags for the applications and profiles. To use enhanced voice commands, press and hold in the standby mode, and say a voice command. The voice command is the name of the application or profile displayed in the list.
To add more applications to the list, select Options > New application. To add a second voice command that can be used to start the application, select Options > Change command, and enter the new voice command as text. Avoid very short names, abbreviations, and acronyms. To listen to the synthesized voice tag, select Options > Playback. To change voice command settings, select Options > Settings. To switch off the synthesizer that plays recognized voice tags and commands in the selected device language, select Synthesiser > Off. To reset voice recognition learning, for example, when the main user of the device has changed, select Reset voice adapts.
Installation files may be transferred to your device from a compatible computer, downloaded during browsing, or sent to you in a multimedia message, as an e-mail attachment, or using Bluetooth connectivity or infrared. You can use Nokia Application Installer in Nokia PC Suite to install an application to your device. If you use Microsoft Windows Explorer to transfer a file, save the file to a compatible memory card (local disk).
Install applications and software
indicates a.sis application, a Java application, that the application is not fully installed,and that the application is installed on the memory card. Important: Only install and use applications and other software from sources that offer adequate security and protection against harmful software. Before installation, note the following: To view the application type, version number, and the supplier or manufacturer of the application, select Options > View details. To display the security certificate details of the application, select Options > View certificate. See Certificate management, p. 105.

Application manager

Press , and select Tools > App. mgr. You can install two types of applications and software to your device: J2ME applications based on Java technology with the extension.jad or.jar ( ). Other applications and software suitable for the Symbian operating system ( ). The installation files have the.sis extension. Only install software specifically designed for your Nokia N73. Software



SCD-777ES Comptabilite 11 VRC-400 FOR Ps2 LE37B551a6W Edition SC-AK600 SGH-C420L Roadmate 3055 LE40B650t2W PDP-4360HD Avicc-C-HD3-2 YZ125-2006 240V 265-1 ALL-IN-ONE DE6644 System Guitars 28 I PMC-DR50L Guide GX-625 RN-7-9-11 Mo MO LA40C650l1R Fusion MVX35I CLP-620ND VOX VT15 KT2255 CL-21M40MQ MCM906 12 Tablet PF4450 DV276 Multimix6FX DVX298H Gz-mc200 612 1 MAC 426L Samsung D60 KDC-B7021 CK460C Plus Pink Motorola I560 Review Force PAD J3-20 V-1100Z PSR-550 Adventure DX FZ35S5M T59840 DSC-P9 MY901C 37LD8700C GP-2000 Empires BUA-100 DVD-SH895A YZF-R6-2009 SA-VE155 FC8601 Beta 40 MDR-RF940R ICD-U70 XDM7610 Samsung 920N L100 Mcbr440B CE1185UB SP1213N 3211178 CMT-E301 DV-GH550 DEH-P1Y AD586XE1 CLP-500 OFX 550 Brandt A210 CPX327W SA-EX500 VGN-CS11s P Electronico Iq24 KX-TG9332 Wlmg 1010 7020S Elura 85 WD9280 LH-T9654SB Dell 1710 Grandtouch III Ls30 Phone Capture NX2 EL-9900C EL-506V Dynamo DMR-EH56 Yamaha T-85


manuel d'instructions, Guide de l'utilisateur | Manual de instrucciones, Instrucciones de uso | Bedienungsanleitung, Bedienungsanleitung | Manual de Instruções, guia do usuário | инструкция | návod na použitie, Užívateľská príručka, návod k použití | bruksanvisningen | instrukcja, podręcznik użytkownika | kullanım kılavuzu, Kullanım | kézikönyv, használati útmutató | manuale di istruzioni, istruzioni d'uso | handleiding, gebruikershandleiding



1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101