Enterprise Edge M7324 Quick Reference Guide
2000 Nortel Networks P0908514 Issue 03
Your Enterprise Edge M7324 Telephone
Memory and line buttons are buttons with indicators for one touch dialing, feature operation or line access. Display shows the time, date, call information, and guides you. The lower line of the display is reserved for display button instructions. Display buttons Dial pad Volume control Feature button starts or ends a feature. Hold button Release button cancels active calls. Indicators appear beside lines and features.

Using display buttons

Three display buttons appear directly below the display. When active, these buttons appear in capital letters on the second line of the display. In this guide, display buttons appear as underlined, capital letters: for example, OK.
Contrast level 2 DOWN UP OK
Display message Display button message Display buttons

Using Button Inquiry

Check what is programmed on your memory buttons.
1. 2. 3. 4. Release all calls or lines with dial tone. Press. Press the button(s) that you want to check and read the display. Press when finished.
Adjusting display contrast Selecting a ring type and volume level
1. Press. 2. Press UP or DOWN for the level you want. 3. Press OK when finished. 1. Press. 2. Press , , , , or NEXT to hear the different ring types. 3. While the telephone is ringing, press to adjust the volume level. 4. Press OK to store the volume level and ring.

Mounting the telephone

The M7324 telphone can be placed on any level surface. It cannot be wall-mounted.
Page 1 Enterprise Edge M7324 Quick Feature Guide
Making and answering calls
Answering calls Answering calls using the handset When your telephone rings, or flashes beside an Intercom or line button:

1. Lift the handset.

Press the button beside the flashing before lifting the handset.
Answering calls using Handsfree When your telephone rings, or flashes beside an Intercom or line button:

1. Press.

Making calls
Depending upon the dialing mode programmed on your telephone, you may have to lift the handset before making a call. External calls using numbered line buttons
1. If you do not have an external Prime line, press a line button. 2. Dial your call.
External calls using Intercom buttons
1. Lift the handset. 2. If appears beside an Intercom button, enter a line pool access code. Press an Intercom button without , then enter a line pool access code. 3. When you hear external dial tone, dial your call.
Internal calls using Intercom buttons
1. If you do not have an internal Prime line, press. 2. Dial your call.
Note: Line pool access codes and extension numbers are supplied by your System Administrator. Holding Calls
1. Press. The flashes beside the line on hold. 2. Press the line button with the flashing to return to the call.
Automatic hold Calls are put on hold automatically when you switch from one line to another.
Use Exclusive Hold () to keep a call on hold so that it can be retrieved only at your telephone.

Exclusive hold

Page 2 Enterprise Edge M7324 Quick Feature Guide
Making and answering calls continued
This button operates your telephones built-in microphone and speaker. Your System Administrator can program Handsfree for your telephone.
1. Press and replace the handset to switch to Handsfree. 2. Pick up the handset to switch back. 1. Press to turn the microphone OFF. 2. Press again to turn the microphone ON.
Switching between Handsfree and handset

Using Mute

Making calls using Handsfree Notice
1. Press instead of lifting the handset.
This telephone now conforms to the latest standards in relation to the positioning of Q and Z on the number keys. The Q appears on key number 7 and the Z appears on key number 9.
Page 3 Enterprise Edge M7324 Quick Feature Guide

Programming memory buttons
About memory buttons Memory buttons are the buttons with labels other than line or Handsfree buttons. Memory buttons store telephone numbers or feature codes to give you one-touch dialling or feature activation. You can change the function of a memory button by programming it with a new number or feature. If you have programmed a memory button with an extension number, the indicator comes on when the number is busy.
Remember: Press to check a memory or line button.
1. If you are on a call or a line with dial tone, press or. 2. Press. 3. Press a memory button. 4. Dial the external number. 5. Press OK to store the number. 6. Label your new button. 1. If you are on a call or a line with dial tone, press or. 2. Press. 3. Press a memory button. 4. Dial the extension number. 5. Label your new button. 1. If you are on a call or a line with dial tone, press or. 2. Press. 3. Press a memory button. 4. Press and the feature code. 5. Label your new button. 1. If you are on a call or a line with dial tone, press or. 2. Press. 3. Press the memory button you want to erase. 4. Press OK to erase the button.

External Autodial

Internal Autodial

Features

Erasing memory buttons
Page 4 Enterprise Edge M7324 Quick Feature Guide

Setting up the telephone

Connecting the cords ATTENTION Before attempting to carry out any work on the telephone, ensure that the line cord is unplugged from the wall socket. To remove any of the cords, squeeze the release latch on the plug and gently pull the plug from the socket. Connect the handset cord to the jack labelled with the telephone icon and route the cord as shown. If you are using a headset, route the cord along the channel in the base and connect the cord to the telephone jack that is marked with the headset icon. Route the line cord through the stand and connect the cord to the telephone jack that is marked with the jack icon. Attach the stand using the slots on the back of the telephone. Once the above work is complete, plug the line cord back into its wall socket.
Connect to jack from distribution block

Connect to receiver

Page 5 Enterprise Edge M7324 Quick Feature Guide

P0908514 Issue 03