CDN25, CDN25+G, CDN30 Professional CD Players
Quick Start Owners Manual

BOX CONTENTS

CD PLAYER TRANSPORT UNIT CD PLAYER CONTROL UNIT IEC POWER CORD RCA CONNECTING CABLES (2 pair) CONTROL CABLE
Manual de inicio rpido del usuario (ESPAOL)

CONTENIDO DE LA CAJA

UNIDAD TRANSPORTADORA DE REPRODUCTOR DE CD UNIDAD DE CONTROL DE REPRODUCTOR DE CD CABLE DE ALIMENTACIN IEC CABLES CONECTORES
Schnellbedienungsanleitung (DEUTSCH)

INHALT DER SCHACHTEL

TRANSPORT EINHEIT F. CD-SPIELER STEUERUNGSEINHEIT F. CD-SPIELER IEC-genormtes STROMKABEL RCA-VERBINDUNGSKABEL (DOPPELPAAR) STEUERUNGSKABEL
Manuale Rapido di Utilizzazione (ITALIANO)
CONTENUTO DELLA CONFEZIONE:
UNIT DI TRASPORTO LETTORE CD UNIT DI CONTROLLO LETTORE CD CAVO DI ALIMENTAZIONE IEC CAVI DI CONNESSIONE RCA (2 paia) CAVO DI CONTROLLO
Guide dutilisation simplifi (FRANAIS)

CONTENU DE LA BOTE

UNIT DE TRANSPORT DU LECTEUR CD UNIT DE COMMANDE POUR LECTEUR CD CBLES DE CONNEXION RCA (2 paires) CBLE DALIMENTATION IEC CBLE DE COMMANDE
CD PLAYER QUICK SETUP 1. 2. 3. 4. 5. 6. 7. 8. Make sure all items listed on the front of this guide are included in the box. READ SAFETY INSTRUCTION BOOKLET BEFORE USING THE PRODUCT. Study this setup diagram. Mount the units in your console or rack with 19 EIA rails. The transport should be mounted not to exceed an angle of 15 degrees. Make sure all devices are turned off and all faders and gain knobs are set to zero Connect all devices as indicated in the diagram. Connect the stereo outputs to power amplifier(s), tape decks, and/or other audio sources. 9. 10. Plug all devices into AC power. Switch everything on in the following order. audio input sources (i.e. turntables or CD players) Mixers last, any amplifiers or output devices When turning off, always reverse this operation by, turning off amplifiers Mixers last, any input devices Go to http://www.numark.com for product registration. More information about this product may be found at http://www.numark.com

FRONT PANEL FEATURES

4. 5. 6.
Open/Close: Press to load or eject the disc. The tray will not open if a disc is in play. The tray door will automatic close in 30 seconds if left open. This is to protect the tray from accidental damage while open Single: toggles the unit to play back just one track at a time (single) or play continuously through all tracks and then start over repeating the CD infinitely (continuous). Time: switches the time modes on the display between elapsed playing time, remaining time on the track, and remaining time on the total CD. When toggled to remaining time total the total number of remaining tracks will also show. LCD DISPLAY - Indicates all the functions, as they are occurring, with the CD. Track Buttons: These buttons are used to select the track to be played. Search Button: Pressing this button allows you to use the wheel and rapidly scan the music to find a cue point. The search function automatically shuts off after 8 seconds of non-use or you may toggle it off.
Cue: Returns and pauses the music at the last set cue point. The cue point is where the music will begin when play is pressed. The cue point is set as the initial start point on a track or can be moved when play is started at a different point. For instance if the music is paused then play is pressed a new cue point is set. You can easily edit the cue point by turning the wheel during pause. As you rotate the wheel the music will sound. By stopping the wheel and pressing play a new point is set. Alternately pressing the PLAY button and the CUE button allows the CD to be played from the same position any number of times. Note: Pressing cue 2 times plays music temporarily from this point until the button is released. Play/Pause: Starts the music from the cue point or pauses it while in play. By pressing play after pause a new cue point will be set Jog Wheel: Cue Function: As explained under CUE, when the music is paused and you rotate the wheel, music will sound. By pressing play a new cue point is set.

Search Function: As explained under SEARCH BUTTON, when search is pressed and you rotate the wheel, the music will rapidly scan the music to find a cue point. Pitch Bend Function: allows the user to temporarily change the speed of the music to align beats. When the beats of the music of the CD you wish to match is fast compared to the tempo of the other music rotate the jog wheel counter clockwise (to the left). When the CD is behind rotate the jog wheel clockwise (to the right). The pitch changes temporarily while the jog wheel is rotated. The faster you rotate the wheel the more pitch is changed. Releasing the wheel results in a return to the original pitch. Pitch Range: actives the pitch slider and adjusts the amount of control the pitch slider has on the overall speed of music. Tapping the pitch will toggle slider between 8% and 16% pitch ranges. Holding the pitch for 3 seconds will deactivate the pitch control. Pitch Range LEDs: indicate current pitch range. When both LEDs are off the pitch slider is not active
Pitch Slider: By moving the slider in the (+) direction the speed of the music permanently speeds up. By moving the slider in the (-) direction the speed of the music permanently slows down. To match the speeds of two CDs you can adjust the pitch. When the tempo of the music of the CD you wish to match is slow compared to the tempo of the other music, move the slider to the (+) side and match the speed. When faster, move the pitch slider to the (-) side. By making this adjustment the speeds will be matched though the beats may not yet be aligned. CD Drawer Place your CDs you wish to play in here. This unit is designed to play commercially available CD and properly burned and finalized CDR formats. Due to variances on the specification of certain CD burners and CDs some discs home made CDs may not play properly. Power Switch- Turn on and turn off the machine with this button. The unit should always be shut down with this button first before any external power is removed.

REAR CONNECTIONS

1. 2. 3. 4. 5.
Control Cable Connector- Plug in the 8-pin cable included in here to connect the remote control and main CD unit together IEC Power Plug Connector - Plug your supplied power cord in here. Voltage Selector - Set this switch to the voltage for your location. RCA Audio Connectors - Connect your CD player to your mixer from this line level output. Digital Output - The format is type 2, form 1, also known as S/PDIF (Sony/Phillips Digital Interface Format). In order to use the digital output you should not use variable pitch
slider and the pitch bend buttons. If you adjust the pitch, other devices may not read the digital output properly because the sampling rate changes Video Output (CDN25+G only) Plug the composite video input on your video monitor or mixer directly into this output. The output will be the text graphics from CD+G Karaoke disks. PAL/NTSC Switch (CDN25+G only) The changes the scan rate of your composite video output. You should set this to your local standard. The incorrect setting will cause your display to flicker. Typically set this to NTSC for the US and PAL for Europe.

LCD DISPLAY FEATURES

1. 2. 3. 4. 5. 6. 7. 8. 9.
CUE - Flashing when the unit is setting a cue point. Lit continuously when the unit is paused at a cue point. PAUSE (II)- Active when the unit is paused. PLAY (>)- Active while the unit is actually playing a CD. TRACK - Shows the track that the unit is playing. TOTAL indicates when total CD remaining tracks are displayed. MINUTES - Shows the minutes elapsed or remaining depending on mode setting. SECONDS - Shows the seconds elapsed or remaining depending on mode setting. FRAMES - The CD Player breaks down a second into 75 frames for accurate cueing. This shows the frames elapsed or remaining depending on mode setting. SEARCH indicates when the unit is searching through the music

10. 11. 12. 13.

14. 15. 16.
CONTINUOUS PLAY Shows when the unit is set to play back the entire CD without stopping between tracks. SINGLE PLAY- Shows when the unit is set to play just one track at a time. CD IN indicates a standard CD is in the unit. TIME BAR - Shows either track elapsed time, remaining track time, or remaining total time depending on the setting of the time button. TIME MODE (Remain) indicates when track remain time is displayed. (Total) indicates when total CD remain time is displayed note: if both indications will not be lit when the unit is showing elapsed time PITCH DISPLAY indicating current pitch
PLAY / PAUSE & CUE OPERATIONS PLAY & CUE
Press "PLAY/PAUSE" to start music Play Interval Press "CUE" return to last starting point Position on Disc

Back Cue Operation

Pressing the PLAY/PAUSE button starts the disc. Pressing the CUE button will reset the disc to the last place where the disc was started. This is called the cue point. By alternately pressing the PLAY/PAUSE button and the CUE button, the disc may be returned and played from the cue point any number of times. This function is called back cue. PLAY, PAUSE & CUE
Press "PLAY/PAUSE" to start music Play Interval Press "PLAY/PAUSE" to pause music Press "PLAY/PAUSE" to start music Play Interval Press "CUE" return to last starting point Position on Disc
When play has been paused and then started again, the return position for the back cue will be updated to this new position. EDITING CUE POINT
When the inner dial is turned while a cue point is set, a new cue point can be located. The CD player will repeatedly play small parts of the CD as you move it to the desired position. By pressing PLAY/PAUSE then CUE you can confirm that the new cue point is desirable.
Matching the Beats Per Minute Match the tempo by monitoring the music of both PLAYER 1 and PLAYER 2 by ear and adjusting the pitch. When the tempo of the music of the selected CD player is slow compared to the tempo of the other player, move the slider to the ( + ) side and match the tempo. When faster, move the pitch slider to the ( - ) side. The following illustration shows the case of matching the pitch of PLAYER 2 to the pitch of the music being played on PLAYER 1. 1. Press PLAY/PAUSE to start PLAYER 1. PLAYER 1 is playing 2. Press PLAY/PAUSE to start PLAYER 2 Both CD players are playing discs. 3. Listen to PLAYER 2 in your headphones. If the beat of channel 2 (in the headphones) is faster than channel 1, slow down the beat of channel 2 using the pitch control. 4. If the beat of channel 2 (in the headphones) slower than the beat of channel 1, speed up the beat using the pitch control.

Product Overview 2007

www.numark.com P: [401] 658.3131 // F: [401] 658.3654

rackmount cd players

CDN25+G

features

Dual composite RCA video outputs for CD+G karaoke lyric display Interactive pitch/search wheel, with finger grip +/ 8 or 16 % pitch control Auto Cue Digital output Sleep mode to save laser life CDR compatible PAL / NTSC switchable
DualDisc Karaoke CD player
Professional CD playback with crowdpleasing karaoke capability. The CDN25+G is a rackmountable dual CD player with 2 composite RCA video outputs for CD+G karaoke lyric and graphic display. These outputs connect to video mixers, monitors, TVs, and become active when playing CDs containing CD+G graphics data (commonly used to display karaoke lyrics). Other features on the CDRcompatible CDN25+G include an interactive pitch/search wheel; 8 or 16% pitch control; rubber buttons; auto cue; S/PDIF digital output; and a sleep mode to save laser life.
All information is preliminary and subject to change.