PRODUCT WARRANTY

1. NUMARK INDUSTRIES LLC (NUMARK warrants to the original pur chaser that NUMARK'S produ cts are free from defects in material ) and workmanship under normal u se and service for the per iod commencing upon the date of purchase from an autho rized NUMARK dealer and continuing for the following period of time after that date for (1) Year. This Limited Warranty is conditioned upon proper use of the product by the purchaser. This Limited Warranty does n ot cover: (a) defects or damage r esulting from accident, m isuse, abuse, neglect, u nusual physical or electrical stress, modificat ion of any part of t he product, or cosmeti c damage; (b) equipment that has the serial number removed or made illegible; (c) all plastic surfaces and ot her externally exposed parts that are scratched or damaged du e to normal use; (d) defects or damage from improper testing, operation, maintenance, installation, adjustment, or service of the mixers; (e) crossfaders. During the applicable w arranty period, NUMARK will repair or replace, at N UMARK'S sole discretion, without charge to t he purchaser, any defective component part of the mixer. NUMARK may, at NUMARK'S sole discretion, use rebuilt, reconditioned, or new parts or components when repairing any product or replace a product with a rebuilt, reconditioned or new product. THE WARRANTIES GIVEN IN THIS LIMITED WARRANTY, TOGETHER WITH ANY IMPLIED WARRANTIES COVERING NUMARK MIXERS, INCLUDING WITHOUT LIMITATION ANY WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, ARE LIMITED TO THE DURATION OF THIS LIMITED WARRANTY EXCEPT TO THE EXTENT PROHIBITED BY. APPLICABLE LAW, NUMARK SHALL NOT BE LIABLE FOR ANY SPECIAL, INCIDENTAL, CONSEQUENTIAL, INDIRECT OR SIMILAR DAMAGES, LOSS OF PROFITS, DAMAGES TO PURCHASER'S PROPERTY, OR INJURY TO PURCHASER OR OTHERS ARISING OUT OF THE USE, MISUSE OR INABILITY TO USE ANY NUMARK PRODUCT, BREACH OF WARRANTY, OR NEGLIGENCE, INCLUDING BUT NOT LIMITED TO NUMARK'S OWN NEGLIGENCE, EVEN IF NUMARK OR ITS AGENT HAS BEEN ADVISED OF SUCH DAMAGES, OR FOR ANY CLAIM BROUGHT AGAINST PURCHASER BY ANY OTHER PARTY THIS LIMITED. WARRANTY IS THE COMPLETE WARRANTY FOR NUMARK'S PRODUCTS, AND IS GIVEN IN LIEU OF ALL OTHER EXPRESS WARRANTIES. THIS LIMITED WARRANTY SHALL NOT EXTEND TO ANYONE OTHER THAN THE ORIGINAL PURCHASER OF THIS PRODUCT AND STATES PURCHASER'S EXCLUSIVE REMEDY. IF ANY PORTION OF THIS LIMITED WARRANTY IS ILLEGAL OR UNENFORCEABLE BY REASON OF ANY LAW, SUCH PARTIAL ILLEGALITY OR UNENFORCEABILTY SHALL NOT AFFECT THE ENFORCEABILITY OF THE REMAINDER OF THIS LIMITED WARRANTY WHICH PURCHASER ACKNOWLEDGES IS AND WILL ALWAYS BE CONSTRUED TO BE LIMITED BY ITS TERMS OR AS LIMITED AS THE LAW PERMITS. This Limited Warranty allocates risk of product failure b etween purchaser and NU MARK, and NUMARK'S product pricing r eflects this allocation of risk and the limitation s of liability contained in this L imited Warranty. The agents, employees, distr ibutors, and dealers of NUMARK are not authorized to make modifications to this Limited Warranty, or make additional warrantie s binding on NUMARK. Accordingly, additional statements such as dealer adver tising or presentation, whether oral or written, do not constitute warrantie s by NUMARK and should not be relied up on. Some jurisdictions do not allow limitations on how long an impl ied warranty lasts, so the above limitation may not app ly to you. This warranty gives you specific legal rights, and you may also have other rig hts which vary under local laws.

Users Manual

RETURN INFORMATION A Return Authorization num ber must be obtained fr om your local Numark Representative. For yo ur representative go to www.numark.com or contact your local office listed below. A copy of the original sales receipt must also be included for the equipment to be repaired under warranty. The faulty equipment must be packed in its original packaging. One additional outer layer of packaging must be in cluded to ensure product safety. Failures to do so ma y inadequately protect the equipment in transit and, therefore, jeopardize the customer warranty. s Numark will not accept COD shipments and no call tags will be issued for merchandise return. Numark will not return repair ed merchandise to customers b y priority service, unle ss by written request at t he customer s cost. Requests must be submitted in writing with merchandise returned. The defective Numark equipment sho uld be sent, FREIGHT PREPAID with Return Authoriz ation number clearly printed on the outer packaging and original sales receipt enclosed to your local service center

USA NUMARK INDUSTRIES Attention: Service Department 11 Helmsman Avenue North Kingstown, RI 02852 USA
UK NUMARK INDUSTRIES Attention: Service Department Unit:9 The Christy Estate Ivy Road Aldershot GU12 4TX England Phone: (44) 400 Fax: (44) 810

Phone: Fax:

+1 (401) 295-9000 +1 (401) 295-5200

INTRODUCTION

Thank you for choosing the Numark WS-32 single non-diversity wireless microphone. Before use, please read this manual carefully to fully understand the proper operation of this product and get the best result. This microphone features quartz controlled, fixed frequency VHF high band operation.

IMPORTANT SAFEGUARDS

To prevent hurt from heavy article dropping, do not put heavy article on the top of this equipment.

Forbidden

CAUTION RISK OF HUMAN HEAVY INJURY OR
GOODS DAMAGE IF USE IMPROPERLY

During Operation

Table of Contents
Introduction Parts Description Features & Specification Users Guide Important Safeguards 5-6
Clear the dust inside regularly. Accumulated dust inside for a long period of time is apt to cause fire. Contact Promic dealer for inside dust cleaning.
Keep power plug and outlet clean. Power plug and outlet with accumulated dust is apt to cause fire, clean them regularly. Insert power plug into power outlet entirely.

Caution

To reduce the risk of fire or electric shock, turn off the power and pull out the plug for safety if this equipment will not be used for a long period of time after set-up.

Pull Out AC Plug

System Contents
1. Receiver x 1 2. Handheld MIC x 1 3. AC Adapter x 1 4. 1/4 Signal Cable x 1 5. 9V Battery x 1 6. Users Manual x 1
WARNING RISK OF HUMAN HEAVY INJURY OR DEATH

IF USE IMPROPERLY

During Setup and Installation
To reduce the risk of fire or electric shock, do not put this equipment into water or make it wet.
Forbidden Forbidden Forbidden
To reduce the risk of electric shock, use only the specified power voltage.
To reduce the risk of fire or electric shock, do not damage the power cord or place it close to hot apparatus. Do not put heavy article on the cord.
To prevent damage from dropping or inclining , do not put equipment on shaking, inclining etc. unstable place. During Operation
To reduce the risk of fire or electric shock caused by continued use when abnormity occurs, please pull out power plug and contact Promic dealer when the following happens: 1.When smoke comes out from this equipment and peculiar smell can be smelt. 2.Water or other article goes into this equipment. 3.Drop on the ground and cover is damaged. 4.Power cord damaged (core comes out or cord is broken). 5.No sound output.

CAUTION

1 Do not open this product by yourself for adjustment. 2 If water goes into this product, please turn off the power immediately and send it to after-sale service department of our company for handling. 3 One receiver cannot receive signal from two same frequency microphones simultaneously. Other microphone with different frequency or brand cannot be used for this receiver.

PARTS DESCRIPTION

Parts Description 1. Receiver
(3) (1) (2) Front Panel (1) Power LED Indicator (2) Microphone Signal LED Indicator (3) Antenna
During Operation To reduce the risk of fire or electric shock, do not remove the cover. High voltage parts inside. Submit this equipment to Promic dealer for examination, adjustment and repair. Do not put vessel of liquid or small metal parts on the top of this equipment. To reduce the risk of fire or electric shock, do not let metal or flammable parts drop into this equipment. To reduce the risk of shock, do not touch power outlet when it thunders.

Do Not Disassemble

Back Panel

(4) (5) (6) (7)

Forbidden Do Not Touch
(4) Volume Control (5) AF Output (6) DC Input (7) Power Switch
CAUTION RISK OF HUMAN HEAVY INJURY OR GOODS

DAMAGE IF USE IMPROPERLY

During Setup and Installation To reduce the risk of electric shock, do not pull power plug with wet hands. To reduce the risk of fire or electric shock from damaged power cord, do not pull power cord when pull out the power plug. Always grasp the plug tightly then pull it out. To reduce the risk of fire or electric shock from damaged power cord, do not move this equipment when the AC power plug is still on.

2. Microphone

(1) (2)
Forbidden Pull Out AC Plug
(1) Power LED Indicator (2) Power Switch (3) Battery Cover
To reduce the risk of fire or electric shock, do not expose this equipment to moisture, dust and sun. Keep away from hot apparatus or place with oil, smoke and water.
FEATURES AND SPECIFICATION

Features

1. Frequency Range: VHF 170~250 MHZ. 2. Frequency Stability 0.005% quartz oscillation controlled. 3. Modulation(Max): 30KHZ. 4. Frequency Response:50Hz~18KHz 3dB. 5. Hum & Noise:96dB min. 6. Dynamic Range:100dB min. 7. Distortion:less than 1%.

USERS GUIDE

Users Guide
1 Insert adapter DC plug into receiver DC input jack, insert the other AC plug into AC power supply outlet(According to the sign on the back side). 2 Sound Signal Output Jack: Insert one end of the cable connector plug into signal output jack at the back of the receiver and the other end of the plug into KTV or amplifier MIC-IN jack. 3 Push on receiver s power switch, if power LED indicator on front panel lights, this indicates that receiver works normally. 4 Insert attached 9V battery into wireless microphone's battery compartment (pay attention to the positive and negative pole), and then close the cover. 5 Turn on microphone power switch, LED indicator will flash once then off , it indicates that microphone is ready to use. 6 At this time receiver's RF LED indicator will light. Adjust volume control to make receiver s volume to be in normal working state. Finish test of wireless microphone.

Wireless Microphone Features and Specification
1. Antenna:built-in with noise terminator circuit. 2. Battery:DC9V. 3. Current Consumption:30mA. 4. Power Output:20mW 5. Spurious Emission:45dB min.
Wireless Receiver Features and Specification
1.Quartz controlled fixed frequency receiving mode. 2.Sensitivity: 10dB/uV(S/N 60dB). 3.Image and Spurious Rejection: min 80dB. 4.Output: unbalanced 0.15V 600. 5.Receiver System: single channel non-diversity. 6.Power Source: DC 12V. 7.Dimensions: (H)220*(W)124*(D)32(MM).

THE PERFECT COMPANION FOR STAGE PERFORMANCE OR PUBLIC ANNOUNCEMENTS The Numark WS32 is a powerful single receiver wireless microphone an excellent entry-level choice for live performance. The system is comprised of a handheld microphone with suregrip rubber body, single channel receiver, connecting cable (1/4" jack to 1/4" jack) and a 9 volt battery.
Single non-diversity receiver with built in noise reduction 1 high quality handheld microphone with ultra quiet on/off switch Exceptional range Frequency response: 50Hz-18kHz, 3dB S/N: 96dB 1/4 Mic cable included 9V battery (not included) required for operation

General Features

Frequency Range: VHF 170~250 MHZ Frequency Stability 0.005% quartz oscillation controlled Modulation(Max): 30KHZ Frequency Response:50Hz~18KHz 3dB Hum & Noise:96dB min Dynamic Range:100dB min Distortion:less than 1%
Wireless Microphone Features and Specification
Antenna:built-in with noise terminator circuit Battery:DC9V Current Consumption:30mA Power Output:20mW Spurious Emission:45dB min
Wireless Receiver Features and Specification
Quartz controlled fixed frequency receiving mode Sensitivity: 10dB/uV(S/N 60dB) Image and Spurious Rejection: min 80dB Output: unbalanced 0.15V 600 Receiver System: single channel non-diversity Power Source: DC 12V Dimensions (H x W x D): 220mm x 124mm x 32mm

Micrfono dinmico

Amplia respuesta de frecuencia Protector de cpsula de acero Conmutador de encendido redondeado de acero Incluye 6 metros de cables blindado, estuche de transporte y soporte