Reviews & Opinions
Independent and trusted. Read before buy Olivetti D-copia 200!

Olivetti D-copia 200

Manual

Preview of first few manual pages (at low quality). Check before download. Click to enlarge.
Manual - 1 page  Manual - 2 page  Manual - 3 page 

Download (English)
Olivetti D-copia 200 Printer, size: 8.4 MB
Related manuals
Olivetti D-copia 200MF
Olivetti D-copia 200D E D-copia 201D

Instruction: After click Download and complete offer, you will get access to list of direct links to websites where you can download this manual.

About

Olivetti D-copia 200About Olivetti D-copia 200
Here you can find all about Olivetti D-copia 200 like manual and other informations. For example: review.

Olivetti D-copia 200 manual (user guide) is ready to download for free.

On the bottom of page users can write a review. If you own a Olivetti D-copia 200 please write about it to help other people.

 

[ Report abuse or wrong photo | Share your Olivetti D-copia 200 photo ]

User reviews and opinions

<== Click here to post a new opinion, comment, review, etc.

Comments to date: 10. Page 1 of 1. Average Rating:
Hulsman 10:38pm on Thursday, October 21st, 2010 
During my first shoot with the flash I had forgotten to lock it in place. The flash slipped off and bounced off the asphault.
SNAFU 1:31pm on Thursday, October 14th, 2010 
Very Addictive Speedlite Bought one of these about 3 years ago when my wife and I had just upgraded from point and click into DSLR photography.
officetest 8:38pm on Tuesday, September 28th, 2010 
The Speedlite 580EX II is the 2nd generation of the 580 series. It has weather proof protection so it is a perfect match for my 5D. This flash is much better than the built in one from my DSLR.
sakiZ 10:27am on Friday, September 24th, 2010 
"I own the 580EX and ordered the 580 EX II because of its electronic compatibility with the new EOS 1D Mark III (which I have on preorder). "Really a good piece of equipment. I do recommend this for anyone interested in taking good indoor photos.
Seron 1:44am on Thursday, September 9th, 2010 
Canon Speedlite 580EX II Hot-shoe clip-on flash his is the premier Speedlite for all photographers, including professionals. Did it too tightly. The Canon speedlight eliminates that. The flash worked right out of the box and my digital Christmas pictures turned out great. Did it too tightly. The Canon speedlight eliminates that. The flash worked right out of the box and my digital Christmas pictures turned out great.
Parano 12:09am on Saturday, August 28th, 2010 
This product very useful & helpful & efficent product , u will feel & enjoy with ur photograph. So u go with this product General Width 3 in Depth 4.
Ricalmeida 7:22am on Saturday, June 12th, 2010 
I thought it was a good flash but i thought it was a little pricey, the flash cost just as much as the camera. "Easy To Clean". I use this for everyday as well as freelance weddings and I find it much better then the previous. Great recycle time. "Lightweight","Quiet".
ZMX 12:14am on Wednesday, May 12th, 2010 
happy customer i received my package early which was wonderful cause later that evening i was able to us my flash for this gorgeous picture i toke i ... I LOVE you guys! Thank you sooooooo much! This was the BEST service I got from all my purchases from Amazon! Thank you upgrading my shipping.
sceptic 6:00pm on Tuesday, May 4th, 2010 
Love the features This flash has everything and does an amazing job! I have been using SLR cameras with a hotshoe flash for years. Sony and Nikon have or will have competitive camera out on the market but I have an invenstment with Canon lenes ans flash units so I am satisfied wit...
Jelmer 4:51pm on Monday, April 5th, 2010 
Wow - just when you thought the 580EX was about as good as it gets - add Environmental Sealing - faster refresh yet quieter - great distance and for a...

Comments posted on www.ps2netdrivers.net are solely the views and opinions of the people posting them and do not necessarily reflect the views or opinions of us.

 

Documents

doc0

Why choose when you can have it all?
OLIVETTI d-COPIA 200MF MULTIFUNCTIONAL COPIER/PRINTER/SCANNER/FAX
WHY SHOULD YOU HAVE TO CHOOSE FROM THE REST WHEN OLIVETTI HAS REVOLUTIONISED THE MULTIFUNCTIONAL COPIER CONCEPT, AND TURNED THE PRINTER INTO A STANDARD FEATURE ON THE d-COPIA 200MF? IF YOU ARE CONSIDERING MULTIFUNCTIONALITY, THE MOST IMPORTANT DECISION HAS ALREADY BEEN MADE AND ALL YOU HAVE TO DO IS ENJOY THE BENEFITS. BECAUSE THE OLIVETTI d-COPIA 200MF IS A TRULY PROFESSIONAL PERFORMER, WITH LEVELS OF QUALITY AND COST-EFFECTIVENESS THAT ARE INCREDIBLE FOR THIS CLASS OF PRODUCT, QUITE SIMPLY, THE D-COPIA 200MF IS THE IDEAL MACHINE FOR PROFESSIONALS OR SMALL OFFICES WHO WANT THE FLEXIBILITY RIGHT FROM THE START AND ALL THE QUALITY OF THE OLIVETTI NAME.

d-COPIA 200MF

User-friendly control panel with simple to follow instructions. Long-life cartridge for up to 15,000 copies
CHOOSING THE RIGHT FEATURES Multifunctionality is certainly one of the most innovative advances in office products today. If you harness its full potential it gives you an added edge for achieving business success. The d-Copia 200MF is the latest addition to Olivetti's multifinctional line-ip. By providing a printer as a standard feature this model extends the possibilities of using one machine to complete all your tasks. A quantum leap for the modern office. The Olivetti d-Copia 200MF delivers a full array of professional functions: copying, printing, optional scanning and fax, and the management of A3 and A4 formats. It also provides an optional sorter unit for easier document management and smarter job presentation.
The d-Copia 200MF also comes with a host of facilities to make life easier in the work place, such as scan-to-e-mail, or digital document filing and archiving. User friendliness is not limited to the machine operation; it also covers the replacement of consumables, by the user, which could not be simpler. What is more there is no risk of toner leaks as the toner cartridge is hermetically sealed. CHOOSING SPEED The Olivetti d-Copia 200MF is a fast device. With its sturdy 300 MHz PowerPCc Processor it delivers the fastest processing speed of any machine in its class. The result is that it copies and prints at a speed of 20 pages per minute, and takes only 3 seconds to scan-in an original and takes just 2 seconds to transmit a fax. CHOOSING DURABILITY The d-Copia 200MF surprises you with its superior speed and performance. You'll be even more impressed by its drum life; an incredible 150,000, and its long-life toner capacity, at 15,000 pages. Together all of these apects ensure peace of mind in the workplace. And, of course, the d-copia 200MF, bears the Olivetti name with all the guarantees of quality, reliability performance and service associated with this top brand.
CHOOSING SIMPLICITY Office work is easier with the Olivetti d-Copia 200MF. Not only because the device is multifunctional, but, above all, because it is so easy to use. The system can be activated from the operator panel whose keys and display make for intuitive operation, or, for users in a networked environment, directly from the PC.
Large Paper Handling Capacity and plenty of Finishing Options
Olivetti d-Copia 200MF Digital Multifunctional Copier/Printer/Scanner/Fax

Preliminary Data Sheet

OLIVETTI d-Copia 200MF

Basic Function

General Standard Configuration: Max Original / Paper Size: Standard Paper Capacity: Bypass Capacity: Max Capacity: Document Feeder: Duplex: Warm-up Time: Greyscale: Dimensions: Weight: Copier Functions Copy Speed: Copy Memory: First Copy Time: Copy Resolution: Zoom Range: Continuous Copy: Duplex Copy: Scan-Once-Print-Many: Electronic Sorter: Rotate Copy: N-up Copy: Printer Functions Network: Print Speed: Printing Resolution: Memory: Printer Interface: Network Interface: Printer Emulation:

Details

Copier and Network Printer up to Ax 300 Sheets 50 Sheets 1,250 Sheets Optional Duplex - 50 Sheets Option 20 Seconds 256 Levels 574 x 603 x 607mm 46kg 20 ppm (A4 crosswise) 64MB (up to 192MB) 5.9 seconds 600dpi x 600dpi 50 - 200% 1-999 Optional Yes Yes Yes 2,4
Scanner Functions Scanner Function: Scanning Speed: Scanner Protocol: Optical Resolution: File Format: Continous Scanning: Scan to E-mail: Scan to PC: Fax Functions Fax Function: Compatibility: Compression System: Modem Speed: Transmission Speed: Fax Resolution: Fax Memory (std/max): Speed Keys: Other Options Platen Cover: Reverse Document Feeder: Duplex Unit: Additional Paper Trays: Job Separator: Finisher: Supplies: Toner Life: Drum Life:
Standard 20opm TWAIN 600dpi TIFF/PDF Yes Option Option
Option Network Super G3 MH / MR / MMR / JBIG 33.6Kbps 2 seconds 400dpi x 400dpi 32MB Add-on Memory 200 Numbers / 80 Destinations
Standard Network up to 20 ppm 600dpi x 600dpi (Fast 1200 dpi) 64MB (max 320MB) USB2.0 / IEEE1284 Standard PCL6 / KPDL3 (PS3 compatible) PDF Direct Print.
Yes Yes Yes 2 x 300 Sheets Yes Yes

15,000 150,000

doc1

Products that have earned the ENERGY STAR are designed to protect the environment through superior energy efficiency.

Laser information

Wave length Pulse times Output power +15 nm -10 nm 12.88 s 12.88 ns/7 mm Max 0.2 mW 780 nm
At the production line, the output power of the scanner unit is adjusted to 0.18 MILLIWATT (Total Power) PLUS 5% and is maintained constant by the operation of the Automatic Power Control (APC). Caution Use of controls or adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure. This Digital Equipment is CLASS 1 LASER PRODUCT (IEC 60825-1 Edition 1.2-2001) A small amount of ozone is produced within the unit during operation. The emission level is insufficient to cause any health hazard. Note: The present recommended long term exposure limit for ozone is 0.1 ppm (0.2 mg/m3) calculated as an 8 hr. time-weighted average concentration. However, since the small amount that is emitted may have an objectionable odor, it is advisable to place the unit in a ventilated area.

SOFTWARE LICENSE

The SOFTWARE LICENSE will appear when you install the software from the CD-ROM. By using all or any portion of the software on the CD-ROM or in the machine, you are agreeing to be bound by the terms of the SOFTWARE LICENSE.

CONTENTS

1 INTRODUCTION
USING THE MANUALS.. 4 PART NAMES.. 5 OPERATION PANEL.. 6

6 SPECIAL FUNCTIONS

TWO SIDED COPYING..52 DESCRIPTION OF OTHER SPECIAL FUNCTIONS.54 TONER SAVE MODE.54 USER PROGRAMS.55 DISPLAYING TOTAL NUMBER OF COPIES..56

2 SETTING UP THE UNIT

SETUP PROCEDURE. 7 CHECKING PACKED COMPONENTS AND ACCESSORIES.. 8 PREPARING THE UNIT FOR INSTALLATION.. 8 INSTALLING THE TD CARTRIDGE. 10 CONNECTING THE POWER CORD. 12

7 MAINTENANCE

TONER/DEVELOPER CARTRIDGE REPLACEMENT.57 DRUM CARTRIDGE REPLACEMENT.58 CLEANING THE UNIT..60

3 LOADING PAPER

PAPER... 14 LOADING THE PAPER TRAY.. 15 BYPASS FEED (including special paper). 17
8 TROUBLESHOOTING THE UNIT
TROUBLESHOOTING..62 STATUS INDICATORS..63 MISFEED REMOVAL.64 IF A PAPER MISFEED OCCURS IN THE MAIN UNIT WHILE USING THE SPF (d-Copia 201D) 69
4 INSTALLING THE SOFTWARE
SOFTWARE.. 19 BEFORE INSTALLATION. 20 INSTALLING THE SOFTWARE. 21 INDICATORS ON THE OPERATION PANEL.. 33 USING THE PRINTER MODE.. 34 USING THE SCANNER MODE. 36 HOW TO USE THE ONLINE MANUAL.. 45

9 APPENDIX

SPECIFICATIONS..70 ABOUT SUPPLIES AND OPTIONS..72 MOVING AND STORING THE UNIT.73 INDEX..74

5 MAKING COPIES

COPY FLOW. 46 ORIGINAL PLACEMENT. 47 SET THE COPY QUANTITY. 49 EXPOSURE ADJUSTMENT/ PHOTO COPYING.. 49 REDUCTION/ENLARGEMENT/ ZOOM.. 51 SELECTING THE PAPER TRAY. 51

Online manual

OPERATION PANEL

A5 A4 A4 B5 A4 A5
Original to copy key and indicators Two-sided copies from one-sided originals. Turn on Long Edge or Turn on Short Edge can be selected. Exposure mode selector key and indicators Use to sequentially select the exposure modes: AUTO, MANUAL or PHOTO. Selected mode is shown by a lit indicator. (p.49) Light and dark keys and indicators Use to adjust the MANUAL or PHOTO exposure level. Selected exposure level is shown by a lit indicator. (p.49) Use to start and terminate user program setting. (p.55) Alarm indicators Drum replacement required indicator (p.58) Misfeed indicator (p.64) Toner/developper cartridge replacement required indicator (p.57) SPF indicator (p.48) (d-Copia 201D) SPF misfeed indicator (p.68) (d-Copia 201D) Copy ratio selector key and indicators Use to sequentially select preset reduction/enlargement copy ratios. Selected copy ratio is shown by a lit indicator. (p.51) Copy ratio display (%) key Use to verify a zoom setting without changing the zoom ratio. (p.51) Use to check the number of originals that must be returned to the document feeder tray if a misfeed occurs in the machine when the SPF is used (d-Copia 201D). (p.69) Display
Displays the specified copy quantity, zoom copy ratio, user program code and error code.
SCAN key and indicator (p.33, p.41) ONLINE key and indicator Lights up when the unit is used as a printer and scanner. For description of the ONLINE indicator, see "INDICATORS ON THE OPERATION PANEL" (p.33). Start key and indicator Copying is possible when the indicator is on. Press to start copying Use to set a user program. (p.55) Power save indicator Lights up when the unit is in a power save mode. (p.54, p.55) Tray select key Use to select a paper feed station (paper tray or multi-bypass tray). (p.51) Paper feed location indicators Light up to show the selected paper feed station. ZOOM keys and indicator Use to select any reduction or enlargement copy ratio from 25% to 400% in 1% increments. (When the SPF is being used, the zoom copy ratio range is 50% to 200%.(d-Copia 201D)) (p.51) Copy quantity keys Use to select the desired copy quantity (1 to 99). (p.49) Use to make user program entries. (p.55) Clear key Press to clear the display, or press during a copy run to terminate copying. (p.49) Press and hold down during standby to display the total number of copies made to date. (p.56)

SETTING UP THE UNIT

Follow the installation procedure below to use the unit properly. If the unit does not function properly during setup or use, or if a function cannot be used, see "TROUBLESHOOTING THE UNIT" (p.62).

SETUP PROCEDURE

When using the unit for the first time, setup the unit following the procedure shown below.
1 Open the package, and make sure that all the accessories are supplied with the unit. (p.8) 2 Remove the protective materials. (p.9) 3 Install the toner/developer cartridger. (p.10) 4 Load the paper in the paper tray (p.15) or the multi-bypass tray. (p.17) 5 Plug the other end of the power cord into the nearest outlet. (p.12) 6 Install the software.* (p.19) 7 Connect the interface cable* (p.25) and turn on the unit. (p.12) 8 Now, you can copy (p.46), print (p.35) or scan (p.36) your document.

LOADING PAPER

Follow the steps below to load paper into the tray.
For best results, use only paper recommended by OLIVETTI. Type of media Standard paper A4 A5 B5 Letter Legal Invoice A4 A5 A6 B5 B6 Letter (8-1/2" x 11") Legal (8-1/2" x 14") Invoice (5-1/2" x 8-1/2") Size Weight 56g/m2 to 80g/m2

Multi-bypass tray

Standard paper and thick paper

56g/m2 to 128g/m2*2

Special Transparency A4 media film Letter (8-1/2" x 11") Envelope*1 Commercial 10 (4-1/8" x 9-1/2") Monarch (3-7/8" x 7-1/2") DL C5
*1 Do not use non-standard envelopes, and envelopes that have metal clasps, plastic snappers, string closures, windows, linings, self-adhesive, patches or synthetic materials. Do not use envelopes that are filled with air or envelopes that have labels or stamps attached. These will cause physical damage to the unit. *2 For paper weighing from 105g/m2 to 128g/m2, A4 is the maximum size that can be fed through the multi-bypass tray. Special papers such as transparency film, labels and envelopes must be fed one sheet at a time through the multi-bypass tray.

LOADING THE PAPER TRAY

Raise the handle of the paper tray and pull the paper tray out until it stops.
Remove the pressure plate lock. Rotate the pressure plate lock in the direction of the arrow to remove it while pressing down the pressure plate of the paper tray.
Store the pressure plate lock which has been removed in step 2. To store the pressure plate lock, rotate the lock to fix it on the relevant location.

Pressure plate lock

Adjust the paper guides on the paper tray to the copy paper width and length. Squeeze the lever of paper guide A and slide the guide to match with the width of the paper. Move paper guide B to the appropriate slot as marked on the tray.

Paper guide B

Paper guide A
Fan the paper and insert it into the tray. Make sure the edges go under the corner hooks.
Do not load paper above the maximum height line ( the line will cause a paper misfeed. ). Exceeding
Gently push the paper tray back into the unit.
Be sure that paper is free of rips, dust, wrinkles, and curled or bent edges. Make sure all the paper in the stack is the same size and type. When loading paper, ensure there is no space between the paper and the guide, and check if the guide is not set too narrow causing the paper to bend. Loading paper in these ways will result in document skew or a paper jam. When not using the unit for an extended period, remove all paper from the paper tray and store it in a dry place. If paper is left in the unit for an extended period, the paper will absorb moisture from the air, resulting in paper jams. When adding new paper to the paper tray, remove the old paper already contained in the tray. Placing new paper on top of the paper already contained in the tray may result in feeding two sheets at one time. If output paper curls, it may help to turn the paper over when loading it in the tray.

BYPASS FEED (including special paper)
The multi-bypass tray can be used to feed standard paper, transparency film, labels, envelopes, and other special purpose paper. Paper measuring from A6 to A4 and in the weight range of 56g/m2 to 128g/m2 can be used in this tray. (For paper weighing from 105g/m2 to 128g/m2, A4 is the maximum size.) The multi-bypass tray can hold maximum of 50 sheets of paper. (Capacity will vary depending on the type of paper loaded.) The original image must be smaller than the paper or media for copying. If the original image is bigger than the paper or media, this may cause smudges on the edges of the copies.

The multi-bypass tray

Open the multi-bypass tray and extend the tray.
To close the multi-bypass tray, perform step 1 and then step 2 in the illustration and push the round projections at the right of the tray until they click.
Set the paper guides to the paper width. Insert the paper (print face down) all the way into the multi-bypass tray.

Print face

Paper must be fed narrow side into the feed slot. Special papers such as transparency film, labels, and envelopes must be fed one sheet at a time through the multi-bypass tray. When copying onto transparency film, remove each copy promptly. Do not let copies stack up.

Press the tray select (

) key to select the multi-bypass tray.
Note for loading envelopes
Envelopes must be fed narrow side into the feed slot at a time. Do not use non-standard envelopes, and envelopes that have metal clasps, plastic snappers, string closures, windows, linings, self-adhesive, patches or synthetic materials. Do not use envelopes that are filled with air or envelopes that have labels or stamps attached. Envelopes of which the surface is not flat because of embossing may cause the copies/prints to become smudged. Under high humidity and temperature conditions the glue flaps on some envelopes may become sticky and be sealed when copied/printed. Use only envelopes which are flat and crisply folded. Curled or poorly formed envelopes may be poorly printed or may cause misfeeds. Be sure to select either Com10, DL, C5 or Monarch on the paper size setting of the printer driver. (For detailed information on printer driver, refer to the online manual.) It is recommended that you perform a test print before performing the actual copy/ print job.
Note for loading thick paper
Copying on thick paper requires higher fusing temperature setting. Set the user program 29 to "2 (High)" when using thick paper. (See page 55 and 56.)

INSTALLING THE SOFTWARE

This chapter explains how to install and configure the software that is required for the printer and scanner functions of the machine. The procedure for viewing the Online Manual is also explained. The screen images in this manual are mainly for Windows XP. With other versions of Windows, some screen images may be different from those in this manual. This manual refers to the CD-ROM that accompanied the machine simply as "CD-ROM".

SOFTWARE

The software CD-ROM that accompanies the machine contains the following software:

MFP driver

Printer driver
The printer driver enables you to use the printer function of the machine. The printer driver includes the Print Status Window. This is a utility that monitors the machine and informs you of the printing status, the name of the document currently being printed, and error messages. Please note that the Print Status Window does not operate when the machine is used as a network printer.

Scanner driver*

The scanner driver allows you to use the scanning function of the machine with TWAIN-compliant and WIA-compliant applications.
Desktop Document Manager*
Desktop Document Manager is an integrated software environment that makes it easy to manage documents and image files, and launch applications.

Button Manager*

Button Manager allows you to use the scanner menus on the machine to scan a document. *The scanning feature can only be used with computers that are connected to the machine by a USB cable. If you are connected to the machine by a LAN connection, only the printer function can be used.

BEFORE INSTALLATION

Hardware and software requirements
Check the following hardware and software requirements in order to install the software. Computer type IBM PC/AT or compatible computer equipped with a USB 2.0/1.1*1 or 10Base-T LAN interface
4 Operating system*2 *3 Windows 98, Windows Me, Windows 2000 Professional* , Windows XP*4, Windows Vista*4*

Display

800 x 600 dots (SVGA) display with 256 colors (or better)
Hard disk free space 150 MB or more Other hardware requirements An environment on which any of the operating systems listed above can fully operate
*1 Compatible with Windows 98, Windows Me, Windows 2000 Professional, Windows XP or Windows Vista preinstalled model standardly equipped with a USB port. *2 Printing is not available in MS-DOS mode. *3 The machine does not support printing from a Macintosh environment. *4 Administrator's rights are required to install the software using the installer.

Use a network cable that is shielded.
Turn on the machine. Insert the CD-ROM into your computer's CD-ROM drive. Click the "Start" button, click "My Computer" ( double-click the CD-ROM icon ( ). ), and then
On Windows Vista, click the "Start" button, click "Computer" and then double-click the CD-ROM icon ( ). In Windows 98/Me/2000, double-click "My Computer", and then double-click the CD-ROM icon.
To set the IP address of the machine, follow the steps below. If the machine is already connected to the network and its IP address has been set, go to "LPR (TCP/IP) direct printing" (p.27).

Set the IP Address

This setting is only required once when using the machine on a network.
Click the "Set the IP Address" button.
The printer or printers connected to the network will be detected. Click the printer to be configured (the machine) and click the "Next" button.

d-Copia 200D/201D

The "Ethernet Address" is indicated on the left side of the machine near the LAN connector. If the machine can not be recognized, enter the Ethernet Address and click the "Initialize" button to initialize the IP address. Follow the on-screen instructions to click the "OK" button and then the "Search" button. If the machine is still not recognized, disable your computers firewall and then repeat the installation from the beginning.
Enter the IP address, subnet mask, and default gateway.
The settings in the above window are examples. Be sure to ask your network administrator for the correct IP address, subnet mask, and default gateway to be entered.
When "Get IP Address Automatically" is selected, the IP address may at times change automatically. This will prevent printing. In this event, select "Assign IP Address" and enter the IP address.
Click the "Next" button. Click the "Yes" button when a confirmation dialogue box appears.
Go to step 11 on page 28.
LPR (TCP/IP) direct printing
After step 1-7 on page 25-26
Click the "Printer Driver" button.
If you have not set the IP Address, click the "Set the IP Address" button first and go to step 8 on page 26.

Flow of the Button Manager setting The Button Manager can directly handle a d-Copia 200D/201D series device event
and start your selected application according to the scan setting made on the
d-Copia 200D/201D operation panel (SC1, SC2, SC3, SC4, SC5, SC6).
This will scan directly into your application from the device.
Scanner SCAN key pressed. Event Manager Windows OS Button Manager No Selection dialog is displayed. User selected application The user application opens.
The settings for the Windows Event Manager for the OLIVETTI d-Copia 200D/201D device allow the user to take advantage of the OLIVETTI Button Manager to take control of events from Windows and send scanned images to any application that can be selected in Button Manager. This can be done with the Windows OS showing the Event Manager selection dialog or directly into a selected application if the Button Manager is the only allowed handler for device events This is the Control Panel from the settings for the Windows Event Properties dialog for "Scanners and Manager for the OLIVETTI d-Copia Cameras". 200D/201D. The d-Copia 200D/201D is shown This is done by changing the Windows device selected. settings for the settings for the Windows Event Manager for the d-Copia 200D/201D in the Scanner and Camera device settings in the Control Panel.
OLIVETTI d-Copia 200D/201D
All About The Windows Event Manager and scanner events in Windows 98, Windows Me, Windows 2000, Windows XP and Windows Vista
Windows Platforms provide a mechanism for software to handle external events for a scanner device like the OLIVETTI d-Copia 200D/201D series products. This mechanism is controlled by the device manager on a device basis. Applications that can handle events from a scanner/camera device register with the Windows Event Manager and shown as available in the registered applications. The path an event takes to get to the user's selected application depends upon the event settings for the device.
Scanner SCAN key pressed. Event Manager Windows OS Event Manager selection dialog Displayed on screen User selects an application. The user application opens.
Olivetti Button Manager P Olivetti Button Manager P
This is the Windows Event Manager Selection Dialog. Shown are two applications registered to handle the scanner event from d-Copia 200D/201D device.
Using the SCAN key to begin scanning
Scanning is not possible during a copy job. If the SCAN ( ) key is pressed during a print job, the scan job will be stored. When scanning an original that has been placed in the SPF, only one original can be placed unless you are using Desktop Document Manager.

Press the SCAN (

) key.
The unit enters scan mode.
Place the original you wish to scan on the document glass/SPF.
For the procedure for placing the original, see "ORIGINAL PLACEMENT" (p.47).

Select "OLIVETTI MFP TWAIN P", and click the "Select" button.
Olivetti MFP TWAIN P WIA-Olivetti d-Copia 200D/201D
If you use more than one scanning device, select the scanner you want to use through the application. The method for accessing the "Select Scanner" option, depends upon the application. For more information, see the online manual or the help file of your application.
Select "Acquire Image" from the "File" menu, or click the "Acquire" button ( ).
Set the configuration for scanning (refer to the online manual and help file), and click the "Scan" button.

Scan is started.

Scanning with the "Scanner and Camera Wizard" in Windows XP
Windows XP includes as a standard feature an image scanning function. The procedure for scanning with the "Scanner and Camera Wizard" is explained here. To cancel scanning, click the "Cancel" button in the screen that is displayed.
Click the "Start" button, select "Control Panel", and click "Printers and Other Hardware", and then click "Scanners and Cameras" in the start menu. Click the "OLIVETTI d-Copia 200D/201D" icon and click "Get picture" in "Imaging Tasks".
The "Scanner and Camera Wizard" appears. Click "Next" and establish the basic settings for scanning.
For information on the settings, see the Windows XP help file. After completing each setting, click "Next".
Select a name, format, and folder for the scanned image.
For information on the image name, file format, and folder, see the Windows XP help file.
Scanning begins. When scanning ends, select the next task you wish to perform.
For information on each selection, see the Windows XP help file. To quit the "Scanner and Camera Wizard", select "Nothing. Im finished working with these pictures." and click "Next".

Press the start ( ) key. The original is scanned into the unit's memory and the number of the copy quantity blinks in the display. Place the original that you wish to copy onto the rear side of the paper, and press the start ( ) key again. Copying begins.
Using the SPF (d-Copia 201D) Press the start ( ) key. Copying begins in the selected two-sided copy mode.
DESCRIPTION OF OTHER SPECIAL FUNCTIONS

Toner save mode

Reduces toner consumption by approximately 10%.

Power save modes

The unit has two power save modes of operation: preheat mode and auto power shut-off mode.

Preheat mode

When the unit enters the preheat mode, the power save ( ) indicator will light up and other indicators will remain on or off as before. In this condition, the fuser in the unit is maintained at a lower heat level, thereby saving power. To copy from the preheat mode, make desired copier selections and press the start ( ) key using the normal copying procedure.

Auto power shut-off mode

When the unit enters the auto power shut-off mode, the power save ( ) indicator will light up and other indicators except the ONLINE indicator will go out. The auto power shut-off mode saves more power than the preheat mode but requires a longer time before starting copying. To copy from the auto power shut-off mode, press the start ( ) key. Then make desired copier selections and press the start ( ) key using the normal copying procedure.

Auto clear

The unit returns to the initial settings a preset amount of time after the end of job. This preset amount of time (auto clear time) can be changed.
Resolution of AUTO & MANUAL mode
You can set the copy resolution used for AUTO and MANUAL ( ) exposure mode.
Prevention of OC copies when the SPF is up function (d-Copia 201D)
When enabled, this function may help prevent wasteful use of toner that occurs when the OC cover is not completely closed. If the start ( ) key is pressed when the OC cover is not completely closed, " " will appear in the display and copying may not take place. If copying does not take place, copying can be performed by pressing the start ( ) key again, however, the scan size set in "Copy effective paper width setting function" (program numbers 25, 26) will be used. If the OC cover is completely closed after " " appears, copying will take place at the normal size.

TONER SAVE MODE

Press the exposure mode selector key to select the MANUAL ( ) mode.
Press and hold down the exposure mode selector key for approximately 5 seconds. The MANUAL ( ) indicator will go out and the PHOTO ( ) indicator will begin to blink. The light and dark indicator marked "5" will light up, indicating the standard toner mode is active.
To enter the toner save mode, press the light ( ) key. The light and dark indicator marked "1" will light up, indicating the toner save mode is selected.
Press the exposure mode selector key. The PHOTO ( ) indicator will stop blinking and light up steadily. The light and dark indicator marked "3" will light up. The toner save mode is now active.
To return to the standard mode, repeat the procedure but use the dark ( ) key to select exposure level "5" in step 3.

USER PROGRAMS

The user programs allow the parameters of certain functions to be set, changed, or canceled as desired.
Setting the user programs
Press and hold down the light ( ) key for more than 5 seconds until all the alarm indicators ( , , ) blink and " " appears in the display. Use the left copy quantity ( ) key to select a user program number (For the user program numbers, see the following table.). The selected number will blink in the left side of the display. Press the start ( ) key. The entered program number will be steadily lit and the currently selected parameter number for the program will blink on the right side of the display. Select the desired parameter using the right copy quantity ( ) key. The entered parameter number will blink on the right of the display.
Program No. Mode Auto clear time Preheat mode Auto power shut- off mode Auto power shut- off timer *7 *1 *10 sec., sec., sec., min., min. ON, 2 Parameters 30 sec., *sec., sec., min., sec., OFF 5 min., 120 min.,

OFF 60 min.,

5 min., 2 30min., min., min.

Program No. 21 24

Mode SPF automatic original discharge time (d-Copia 201D) Resolution of AUTO & MANUAL mode Reset factory Prevention of OC copies when the SPF is up function Copy effective paper width setting function (Bypass tray) Copy effective paper width setting function Selection of copy start state (Polygon rotation on/off) Fusing temperature setting when the bypass tray is used 5 **1 ***1
Parameters 5 min., *min., 60 min., min., 240 min., 6 OFF 300dpi, 2 YES, *2 ON, 2 600dpi NO OFF
Large (A4 width), Small (B5R width) Large (A4 width), Small (B5R width) ON, 2 OFF

Low, *2

* Factory default settings are indicated with an asterisk (*).
Press the start ( ) key. The right-hand number in the display will be steadily lit and the entered value will be stored.
To change the setting or to set another mode, press the clear key. The unit will return to step 2.

Indication

MISFEED REMOVAL
When the misfeed ( ) indicator blinks or blinks in the display, the unit will stop because of a misfeed. If a misfeed occurs when using the SPF, a number may appear in the display after a minus sign. This indicates the number of the originals that must be returned to the original feeder tray after a misfeed. Return the required number of originals. Then this number will disappear when copying is resumed or the clear ( ) key is pressed. When the SPF misfeeds an original sheet, the unit will stop and the SPF misfeed ( ) indicator will blink, while the misfeed ( ) indicator will remain off. For a misfeed of originals in the SPF, see "D: Misfeed in the SPF (dCopia 201D)" (p.68).
Check the misfeed location. Remove the misfed paper following the instructions for each location in the illustration below. If the misfeed ( ) indicator blinks, proceed to "A: Misfeed in the paper feed area" (p.65).
If paper is misfed here, proceed to "B: Misfeed in the fusing area". (p.66)
If the misfed paper is seen from this side, proceed to "C: Misfeed in the transport area". (p.67)
If paper is misfed here, proceed to "A: Misfeed in the paper feed area". (p.65)
A: Misfeed in the paper feed area
Gently remove the misfed paper from the paper feed area as shown in the illustration. When the misfeed ( ) indicator blinks, and the misfed paper is not seen from the paper feed area, pull out the paper tray and remove the misfed paper. If the paper cannot be removed, proceed to "B: Misfeed in the fusing area".
The fusing unit is hot. Do not touch the fusing unit when removing misfed paper. Doing so may cause a burn or other injury. Do not touch the surface (green portion) of the drum cartridge when removing the misfed paper. Doing so may damage the drum and cause smudges on copies. If the paper has been fed through the multi-bypass tray, do not remove the misfed paper through the multi-bypass tray. Toner on the paper may stain the paper transport area, resulting in smudges on copies.
Close the side cover by pressing the round projections near the side cover open button. The misfeed ( ) indicator will go out and the start ( ) indicator will light up.
B: Misfeed in the fusing area
Lower the fusing unit release lever.
Fusing unit release lever
Gently remove the misfed paper from under the fusing unit as shown in the illustration. If the paper cannot be removed, proceed to "C: Misfeed in the transport area".
The fusing unit is hot. Do not touch the fusing unit when removing misfed paper. Doing so may cause a burn or other injury. Do not touch the surface (green portion) of the drum cartridge when removing the misfed paper. Doing so may cause smudges on copies. Do not remove the misfed paper from above the fusing unit. Unfixed toner on the paper may stain the paper transport area, resulting in smudges on copies.

Raise the fusing unit release lever and then close the side cover by pressing the round projections near the side cover open button. The misfeed ( ) indicator will go out and the start ( ) indicator will light up.
C: Misfeed in the transport area
See "B: Misfeed in the fusing area" (p.66).

Open the front cover.

To open the front cover, see "INSTALLING THE TONER/DEVELOPER CARTRIDGE" (p.10).
Rotate the roller rotating knob in the direction of the arrow and gently remove the misfed paper from the exit area.

Roller rotating knob

Raise the fusing unit release lever, close the front cover and then close the side cover by pressing the round projections near the side cover open button. The misfeed ( ) indicator will go out and the start ( ) indicator will light up.
D: Misfeed in the SPF (d-Copia 201D)
An original misfeed may occur at one of three locations: if the misfed original is seen from the document feeder tray, (A) in the document feeder tray; if the misfed original is not seen from the document feeder tray, (B) in the exit area or (C) under the document feeder cover. Remove the misfed original following the instructions for each location. After removing the jammed paper, be sure to press the clear key to clear the misfeed error state. (A) Open the document feeder cover and pull the misfed original out from the document feeder tray. Press the SPF jam release lever (see below) while you remove the original. Close the document feeder cover. Open and close the SPF to clear the SPF misfeed ( ) indicator. If the misfed original cannot be easily removed, proceed to (C).
Document feeder cover SPF jam release lever
(B) Open the SPF and rotate the roller to remove the misfed original from the exit area. If the misfed original cannot be easily removed, proceed to (C).

Roller

(C) If the original does not move easily into the exit area, remove it in the direction of the arrow while rotating the knob.
IF A PAPER MISFEED OCCURS IN THE MAIN UNIT WHEN USING THE SPF (d-Copia 201D)
If a paper misfeed occurs in the main unit paper path when making copies with original(s) through the SPF, the SPF will automatically stop scanning. Manually remove the misfed paper(s) in the main unit. You can check the number of originals that must be returned to the document feeder tray in the display on the operation panel. Follow the steps below to display the number of originals to be returned. The following procedure omits removal of the misfeed. Be sure to remove the misfeed before displaying the number of originals to be returned. For the misfeed removal procedure, see "MISFEED REMOVAL" (p.64).

Dark key.. 6, 49 Desktop Document Manager. 19 Display.. 6 Displaying total number of copies.. 56 Disposing of toner/developper cartridge.57 Document glass.. 5, 47 Drum cartridge. 5, 58 Drum cartridge replacement. 58 Drum replacement required indicator.. 6, 58, 63
Exposure adjustment.. 49 Exposure mode indicator.. 6, 49 Exposure mode selector key. 6, 49
Before installation.. 20 Button Manager.. 19, 36 Bypass feed.. 17 Bypass tray paper guides. 5, 18
Flow of installation.. 21 Front cover.. 5 Fusing unit release lever.. 5, 66
Cautions - Handling... 1 - Label.. 1 - Using... 1 Charger cleaner.. 5, 61 Checking packed components and accessories... 8 Cleaning the unit - Cabinet... 60 - Document glass.. 60 - SPF... 60 - SPF scanning window. 60 - Transfer charger.. 61 Clear key.. 6, 49, 56 Conventions used in this manual and online manual.. 4 Copy flow.. 46 Copy quantity. 49 Copy quantity key.. 6, 49, 55 Copy ratio display key. 6, 51 Copy ratio selector indicator.. 6, 51 Copy ratio selector key. 6, 51
Handle.. 5 Hardware and software requirements.. 20 How to print.. 35 How to use the online manual. 45
Indicators on the operation panel. 33 Initial settings of operation panel. 13 Installing the software. 19, 21 Installing the toner/developper cartridge.10 Interface - LAN interface.. 25 - USB interface. 25 Interface cable.. 72 Interrupt copying.. 47 Introduction.. 4
LAN interface connector. 25, 72 Light and dark indicator.. 6, 49 Light key.. 6, 49 Loading paper.. 14 Loading the paper tray.. 15
Making copies.. 46 MFP driver - Print Status Window. 19 - Printer driver.. 19 - Scanner driver.. 19 Misfeed indicator. 6, 63, 64 Misfeed removal - Fusing area.. 66 - Paper feed area.. 65 - SPF... 68 - Transport area.. 67 Moving instructions.. 73 Multi-bypass tray. 17
Reduction/enlargement/zoom. 51 Resolution of AUTO & MANUAL mode.. 54, 56
Scan head locking switch.. 9 Scanner driver.. 19 SCAN indicator.. 6, 33 SCAN key.. 6, 41 Scanning from your computer. 42 Scanning with the "Scanner and Camera Wizard".. 44 Setting up the unit. 7 Setup procedure.. 7 Side cover.. 5 Side cover open button.. 5 Specifications. 70 SPF.. 5, 48 SPF indicator.. 6, 48 SPF misfeed indicator. 6, 68 Start indicator.. 6, 33 Start key.. 6, 46, 56 Status indicators.. 63 Supplies and options.. 72 Supply list - Drum cartridge.. 72 - TD cartridge.. 72
Name - Operation panel.. 6 - Part names.. 5
ONLINE indicator. 6, 33 ONLINE key.. 6, 33 Online manual. 4, 45 Opening the printer driver. 34 Opening the scanner driver.. 42 Operation panel. 5, 6 Original placement - Document glass.. 47 - SPF... 48 Original to copy key.. 6, 53
Toner/developper cartridge.. 5, 10, 57 Toner/developper cartridge replacement.. 57 Toner/developper cartridge replacement required indicator 6, 57, 63 Transfer charger.. 5, 61 Tray select key.. 6, 51 Troubleshooting.. 62 Troubleshooting the unit. 62

 

Tags

Boggle Geko 101 SGH-X150 VGF-CP1E Junior 700 EWF14450 Aopen DX34 Office 35 ROC Z407 Biloba 490 1 5 MS7306E Gpsmap 76S M5390 USB Asus P2V SV-SD370V Yamaha FC7 Nngd368M TOP Star Dect1222S-19 LAC-M7600 Korg I4S Pro 76 YZ450F-2006 KDL-40V2000 CE283GN SGH-T439 Vivicam 5024 21FJ8RL C541I ER8312B Jaguar XF Touch HD Guitarfx Dca-510 SR-608EV GC990W SX-M100 LH-D6530A LFA840 TX-P50g10E Officejet 4105 AD-43 NWZ-S516 Pspbg Lansing 121I DP9911P PV-L780D Vaci-5300plus PS-50C7H Retrospect BAR913HG R3 1 WF-T5402TC GL350 AWT1245AA Review DB179MP PSR-300 PCG-GRT915M Microtower SRU9400 Lightscape VX550 CCD-TR415E AVR-4310ciavc-4310 Diamond2 XR-CA600V ACS45 1 AVA-1404 Serie 2 Grandam 2000 Hitachi W43H 570LE-LB570be- VGN-FE650G SGH-L760 Guide DR-3010C Perfection 2450 MHC-RG170 Satellite P100 Altima Cordless 1690 Fight Back TR440 Digimaxl60 Akai GCF1 Coolpix 5000 2545CDS XL1200-1999 PSC 1217 ESF6120 Expedition-2001 7AIV0 Coolpix P80 C9070 PRO 100 BV KX-FC243UA VR530 DCR-HC40E TA-P9000ES

 

manuel d'instructions, Guide de l'utilisateur | Manual de instrucciones, Instrucciones de uso | Bedienungsanleitung, Bedienungsanleitung | Manual de Instruções, guia do usuário | инструкция | návod na použitie, Užívateľská príručka, návod k použití | bruksanvisningen | instrukcja, podręcznik użytkownika | kullanım kılavuzu, Kullanım | kézikönyv, használati útmutató | manuale di istruzioni, istruzioni d'uso | handleiding, gebruikershandleiding

 

Sitemap

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101