TWO SIDED COPYING..52 DESCRIPTION OF OTHER SPECIAL FUNCTIONS.54 TONER SAVE MODE.54 USER PROGRAMS.55 DISPLAYING TOTAL NUMBER OF COPIES..56

2 SETTING UP THE UNIT

SETUP PROCEDURE. 7 CHECKING PACKED COMPONENTS AND ACCESSORIES.. 8 PREPARING THE UNIT FOR INSTALLATION.. 8 INSTALLING THE TD CARTRIDGE. 10 CONNECTING THE POWER CORD. 12

7 MAINTENANCE

TONER/DEVELOPER CARTRIDGE REPLACEMENT.57 DRUM CARTRIDGE REPLACEMENT.58 CLEANING THE UNIT..60

3 LOADING PAPER

PAPER... 14 LOADING THE PAPER TRAY.. 15 BYPASS FEED (including special paper). 17
8 TROUBLESHOOTING THE UNIT
TROUBLESHOOTING..62 STATUS INDICATORS..63 MISFEED REMOVAL.64 IF A PAPER MISFEED OCCURS IN THE MAIN UNIT WHILE USING THE SPF (d-Copia 201D) 69
4 INSTALLING THE SOFTWARE
SOFTWARE.. 19 BEFORE INSTALLATION. 20 INSTALLING THE SOFTWARE. 21 INDICATORS ON THE OPERATION PANEL.. 33 USING THE PRINTER MODE.. 34 USING THE SCANNER MODE. 36 HOW TO USE THE ONLINE MANUAL.. 45

9 APPENDIX

SPECIFICATIONS..70 ABOUT SUPPLIES AND OPTIONS..72 MOVING AND STORING THE UNIT.73 INDEX..74

5 MAKING COPIES

COPY FLOW. 46 ORIGINAL PLACEMENT. 47 SET THE COPY QUANTITY. 49 EXPOSURE ADJUSTMENT/ PHOTO COPYING.. 49 REDUCTION/ENLARGEMENT/ ZOOM.. 51 SELECTING THE PAPER TRAY. 51

Online manual

INTRODUCTION
This chapter provides basic information for using the unit.

USING THE MANUALS

In addition to this printed manual an online manual is also provided. To get full use of all features and functions of this product, be sure to familiarize yourself with both manuals. This printed manual provides all installation and setup instructions as well as instructions in the use of all copier functions. The online manual contains the following information. Provides you with information on how to specify preferences and troubleshooting. Check the online manual when you use this unit after all the initial setup is completed.
How to use the online manual
Explains how to use the online manual.
Provides information on how to print a document.
Explains how to scan using the scanner driver and how to adjust the settings for the Button Manager.

Troubleshooting

Provides instructions on how to solve driver or software problems.

Only insert the power cord into a properly grounded wall socket. Do not use extension cords or power strips.

POWER ON

Ensure that the power switch of the unit is in the OFF position. Plug the other end of the power cord into the nearest outlet. Turn the power switch on the left side of the unit to the "ON" position. The start ( ) indicator will light up and other indicators which show the initial settings of the operation panel will also light up to indicate the ready condition. For the initial settings, see the "Initial settings of operation panel" described on the next page.
The unit will enter a power save mode once the set time has elapsed without any unit operation. The settings of the power save modes can be modified. See "USER PROGRAMS" (p.55). The unit will return to the initial settings a preset amount of time after the end of copy or scanner job. The preset amount of time (auto clear time) can be changed. See "USER PROGRAMS" (p.55).

About the scan head

The scan head lamp remains on constantly when the unit is in the ready condition (when the start ( ) indicator is illuminated). The unit adjusts the scan head lamp periodically to maintain copying quality. At this time, the scan head moves automatically. This is normal and does not indicate unit trouble.
Initial settings of operation panel
When the unit power is on, the operation panel will revert to the initial settings when the time set with the "Auto clear time" setting (p.55) elapses after a job is finished, or when the clear key is pressed twice. The initial settings of the operation panel are shown below.
"0" is displayed in the display. When copying has begun in this state, the settings in the following table are used. Copy quantity Exposure adjustment Zoom Tray 1 copy AUTO 100% Paper tray

Power off methods

If not used for a certain period of time, the unit will automatically enter auto power shut-off mode (p.54) in order to minimize power consumption. In cases where the machine will not be used for a long time, turn off the power switch and remove the power cord from the outlet.

If you need to use a different connection method after installing the software using a USB or network connection, you must first uninstall the software and then install it using the new connection method. In the following explanations it is assumed that the mouse is configured for right hand operation. The scanner function only works when using a USB cable. If an error message appears, follow the instructions on the screen to solve the problem. After the problem is solved, the installation procedure will continue. Depending on the problem, you may have to click the "Cancel" button to exit the installer. In this case, reinstall the software from the beginning after solving the problem.
Using the machine with a USB connection
The USB cable must not be connected to the machine. Make sure that the cable is not connected before proceeding.
If the cable is connected, a Plug and Play window will appear. If this happens, click the "Cancel" button to close the window and disconnect the cable. The cable will be connected in step 13.
Insert the CD-ROM into your computer's CD-ROM drive. Click the "Start" button, click "My Computer" ( double-click the CD-ROM icon ( ). ), and then
On Windows Vista, click the "Start" button, click "Computer" and then double-click the CD-ROM icon ( ). On Windows 98/Me/2000, double-click "My Computer", and then double-click the CD-ROM icon.
Double-click the "setup" icon (
On Windows Vista, if a message screen appears asking you for confirmation, click "Allow".
The "SOFTWARE LICENSE" window will appear. Make sure that you understand the contents of the software license, and then click the "Yes" button.
You can show the "SOFTWARE LICENSE" in a different language by selecting the desired language from the language menu. To install the software in the selected language, continue the installation with that language selected.
Read the "Readme First" in the "Welcome" window and then click the "Next" button.
To install all of the software, click the "Standard" button and go to step 12. To install particular packages, click the "Custom" button and go to next step.
Click the "MFP Driver" button.
Click the "Display Readme" button to show information on packages that are selected.

[Button Manager] / [Desktop Document Manager]
Select "Connected to this computer" and click the "Next" button.
The files required for installation of the MFP driver are copied.
Follow the on-screen instructions. When "The installation of the OLIVETTI software is complete." appears, click the "OK" button.
Follow the on-screen instructions. When "The installation of the OLIVETTI software is complete." appears, click the "OK" button and go to step 12. If you are using Windows Vista and a security warning window appears, be sure to click "Install this driver software anyway". If you are running Windows 2000/XP and a warning message appears regarding the Windows logo test or digital signature, be sure to click "Continue Anyway" or "Yes".
You will return to the window of step 8. If you wish to install Button Manager or Desktop Document Manager, click the "Utility Software" button.
If you do not wish to install the Utility Software, click the "Close" button and go to step 12. After the installation, a message prompting you to restart your computer may appear. In this case, click the "Yes" button to restart your computer.
Installing the Utility Software
Click the "Button Manager" or the "Desktop Document Manager" button.
Click the "Display Readme" button to show information on packages that are selected. Follow the on-screen instructions.
Desktop Document Manager Desktop Document Manager is an integrated software environment that makes it easy to manage documents and image files, and launch applications.
In Windows 98/Me/2000, if the following screen appears, click the "Skip" button or the "Continue" button as appropriate to continue the Desktop Document Manager installation. If "Skip" is selected, the Desktop Document Manager installation will continue without installing Desktop Document Manager Imaging. If "Continue" is selected, Desktop Document Manager Imaging will be installed. If Imaging for Windows is installed on your computer, Desktop Document Manager Imaging will overwrite Imaging for Windows.
Desktop Document Manager Imaging Setup
This program is about to install Desktop Document Manager.
When installing is finished, click the "Close" button.
If you are using Windows Vista and a security warning window appears, be sure to click "Install this driver software anyway". If you are running Windows 2000/XP and a warning message appears regarding the Windows logo test or digital signature, be sure to click "Continue Anyway" or "Yes".

Select "Shared Printer" and click the "Next" button.
For the port to be used, select the machine set as a shared printer, and click the "Next" button.
\\OLIVETTI\d-Copia 200D/201D
If the shared printer does not appear in the list, check the settings in the printer server.
Follow the on-screen instructions. When the "Finish" screen appears, click the "Close" button.
INDICATORS ON THE OPERATION PANEL
The ONLINE indicator and the start ( scanner. ) indicator indicate the state of the printer or
SCAN indicator ONLINE indicator Start indicator Power save indicator

Start indicator

On: Indicates the unit is ready for copying or scanning is being performed. Blinking: The indicator blinks in the following situations: When a print job is interrupted. When reserving a copy job. When toner is being replenished during a copy or print job. Off: The indicator is off in the following situations: During copying or scanning. The unit is in the auto power shut-off mode. When a misfeed or error has occurred. During print online.

ONLINE indicator

The ONLINE key is pressed and on line and off line are changed. On: Indicates the unit is ready for printing or scanning is being performed. (On line) Blinking: Printing or data is being received from a computer. Off: Copying is being performed. (Off line)

Power save indicator

On: Indicates the unit is in a power save mode. Blinking: Indicates that the unit is initializing (when the side cover is opened and closed or the power turned off and on).

SCAN indicator

On: The SCAN ( ) key has been pressed and the unit is in scanner mode. Blinking: A scan job is being executed from the computer, or scan data is stored in the unit's memory. Off: The unit is in the copy mode.

USING THE PRINTER MODE

For problems with the printer function, see the online manual or the help file for the driver.
Opening the printer driver from the start menu
Open the printer driver setup screen by the method shown below.
Click the "Start" button. Click "Control Panel", select "Printers and Other Hardware", and then click "Printers and Faxes".
On Windows Vista, click "Control Panel", and then click "Printer". On Windows 98/Me/2000, select "Settings" and click "Printers".

Scanner SCAN key pressed. Event Manager Windows OS Event Manager selection dialog Displayed on screen User selects an application. The user application opens.
Olivetti Button Manager P Olivetti Button Manager P
This is the Windows Event Manager Selection Dialog. Shown are two applications registered to handle the scanner event from d-Copia 200D/201D device.
Using the SCAN key to begin scanning
Scanning is not possible during a copy job. If the SCAN ( ) key is pressed during a print job, the scan job will be stored. When scanning an original that has been placed in the SPF, only one original can be placed unless you are using Desktop Document Manager.

Press the SCAN (

) key.
The unit enters scan mode.
Place the original you wish to scan on the document glass/SPF.
For the procedure for placing the original, see "ORIGINAL PLACEMENT" (p.47).
Press the right copy quantity key to display the number of the application that you wish to use for scanning.
The application numbers are initially as follows.
Application number SC1 SC2 SC3 SC4 SC5 SC6
Application launched Desktop Document Manager E-mail Fax OCR Microsoft Word Filing
To check the settings, see "Scan Button Destination Setting Dialog Box" (p.38) and then open the settings window of the Button Manager.

Press the start (

Scanning will start and the scanned data will be transferred to the application. If the following screen appears, select OLIVETTI d-Copia 200D/201D Button Manager and click "OK". Button Manager starts and the application Olivetti Button Manager P associated with Button Manager starts. If Olivetti Button Manager P you want only Button Manager to start in this case, set up Button Manager for use in Windows as explained in "Setting up the Button Manager" (p.36). If step 4 is performed with the "Show TWAIN setting screen when scanning" checkbox selected in the Scan Button Destination Setting Dialog Box (p.38), the TWAIN settings screen (p.43) will automatically appear. Check the settings, and then press the start ( ) key again or click the "Scan" button in the TWAIN setting screen to start scanning. The scanned data will be transferred to the application.
Opening the scanner driver and scanning from your computer
Follow the steps below to open the scanner driver setup screen. As an example, this instruction is given using Desktop Document Manager as an image capture application. Scanning is not possible during a copy and print job. The method for starting the scanner driver differs depending on the type of application. Refer to the manual or the help file of your application. When using the scanner driver to scan an original that has been placed in the SPF. If you perform "preview" (see the online manual or the help file for the scanner driver), the original in the SPF will be output to the exit area after previewing. To scan the original after previewing, place the original in the SPF once again.

Using the OLIVETTI TWAIN

Place the original(s) you wish to scan on the document glass/SPF.
After starting Desktop Document Manager, click the "File" menu and select "Select Scanner".

Desktop Document Manager

Select "OLIVETTI MFP TWAIN P", and click the "Select" button.
Olivetti MFP TWAIN P WIA-Olivetti d-Copia 200D/201D
If you use more than one scanning device, select the scanner you want to use through the application. The method for accessing the "Select Scanner" option, depends upon the application. For more information, see the online manual or the help file of your application.
Select "Acquire Image" from the "File" menu, or click the "Acquire" button ( ).
Set the configuration for scanning (refer to the online manual and help file), and click the "Scan" button.

Scan is started.

Scanning with the "Scanner and Camera Wizard" in Windows XP
Windows XP includes as a standard feature an image scanning function. The procedure for scanning with the "Scanner and Camera Wizard" is explained here. To cancel scanning, click the "Cancel" button in the screen that is displayed.
Click the "Start" button, select "Control Panel", and click "Printers and Other Hardware", and then click "Scanners and Cameras" in the start menu. Click the "OLIVETTI d-Copia 200D/201D" icon and click "Get picture" in "Imaging Tasks".
The "Scanner and Camera Wizard" appears. Click "Next" and establish the basic settings for scanning.
For information on the settings, see the Windows XP help file. After completing each setting, click "Next".
Select a name, format, and folder for the scanned image.
For information on the image name, file format, and folder, see the Windows XP help file.
Scanning begins. When scanning ends, select the next task you wish to perform.
For information on each selection, see the Windows XP help file. To quit the "Scanner and Camera Wizard", select "Nothing. Im finished working with these pictures." and click "Next".
Click "Finish" in the screen that appears.

3 Select the copy settings.
To set the number of copies, see page 49. To adjust the resolution and contrast settings, see page 49. To enlarge or reduce the copy, see page 51. To change the tray used, see page 51. To print on both sides of the paper, see page 52.

4 Start copying.

Press the start ( ) key.
If you start a print job while a copy job is in progress, the print job will begin when the copy job is completed. The scanning function cannot be used while a copy job is in progress.

About interrupt copying

If you press the start ( ) key to begin a copy job while a print job using the paper tray or multi-bypass tray is in progress, the copy job will begin automatically after the print data in the unit's memory is printed (interrupt copying). When this is done, the print data remaining in the computer is not sent to the unit. When the copy job ends, press the clear key twice, or press the ONLINE key once to change the unit to the online state (p.33), or wait until the set auto clear time (p.55) elapses. The remaining print data will be sent to the unit and printing will resume. * Interrupt copying during two-sided printing is not possible until the print job is finished.

ORIGINAL PLACEMENT

Using the document glass
The document glass can read up to A4 original. Image loss 4mm can occur at the leading and trailing edges of the copies. Also image loss 4.5mm in total can occur along the other edges of the copies. When copying a book or an original which has been folded or a crumpled original, press down the original cover/SPF lightly. If the original cover/SPF is not securely closed, the copies may be striped or blurred. When using the document glass to scan an original, make sure that an original is not placed in the SPF (d-Copia 201D).
Open the original cover/SPF, and place the original. Place an original face down on the document glass. Align it with the original scale and the centering ( ) mark. Gently close the original cover/SPF.
After placing the original, be sure to close the SPF. If left open, parts outside of the original will be copied black, causing excessive use of toner. In addition, toner may scatter inside the machine or the drum cartridge may suffer damage.

Original scale

Using the SPF (d-Copia 201D)
The SPF is designed to hold up to 50 originals measuring from A5 to A4 and weighting from 56g/m2 to 90g/m2. Before feeding originals in the document feeder tray, be sure to remove any staples or paper clips from them. Before placing curled or wavy originals into the document feeder tray, be sure to flatten them. If not, original misfeeds may result. If the original is placed correctly in the SPF, the SPF indicator will light up. If the original is not placed correctly, the SPF indicator will not light. If the SPF is not closed correctly, the indicator will blink. Badly damaged originals may misfeed in the SPF. It is recommended that such originals be copied from the document glass. Special originals such as transparency film should not be fed through the SPF, but should be placed directly on the document glass. Image loss (max. 4mm) can occur at the leading and trailing edges of the copies. Also image loss (max. 4.5mm in total) can occur along the other edges of the copies. It can be 6mm (max.) at the trailing edge of the second copy of two-sided copying. To stop continuous copying using the SPF, press the clear key. Copying using one-sided to one-sided mode: Ensure that no indicator is lit among the original to copy indicators.

Turn on Long Edge

Turn on Short Edge

Making two-sided copies

Place the original(s) on the document glass or in the SPF. (see "ORIGINAL PLACEMENT" (p.47). Select two-sided copy mode.
When copying in a one-sided to two-sided mode: Use the original to copy key to select the desired one-sided to two-sided copying mode (Turn on Long Edge or Turn on Short Edge). See the illustrations on page 52.
Select the copy settings. See "SET THE COPY QUANTITY" (p.49), "EXPOSURE ADJUSTMENT/PHOTO COPYING" (p.49), and "REDUCTION/ENLARGEMENT/ZOOM" (p.51).
Press the start ( ) key. The original is scanned into the unit's memory and the number of the copy quantity blinks in the display. Place the original that you wish to copy onto the rear side of the paper, and press the start ( ) key again. Copying begins.
Using the SPF (d-Copia 201D) Press the start ( ) key. Copying begins in the selected two-sided copy mode.
DESCRIPTION OF OTHER SPECIAL FUNCTIONS

Toner save mode

Reduces toner consumption by approximately 10%.

Power save modes

The unit has two power save modes of operation: preheat mode and auto power shut-off mode.

Preheat mode

When the unit enters the preheat mode, the power save ( ) indicator will light up and other indicators will remain on or off as before. In this condition, the fuser in the unit is maintained at a lower heat level, thereby saving power. To copy from the preheat mode, make desired copier selections and press the start ( ) key using the normal copying procedure.

Auto power shut-off mode

When the unit enters the auto power shut-off mode, the power save ( ) indicator will light up and other indicators except the ONLINE indicator will go out. The auto power shut-off mode saves more power than the preheat mode but requires a longer time before starting copying. To copy from the auto power shut-off mode, press the start ( ) key. Then make desired copier selections and press the start ( ) key using the normal copying procedure.

Auto clear

The unit returns to the initial settings a preset amount of time after the end of job. This preset amount of time (auto clear time) can be changed.
Resolution of AUTO & MANUAL mode
You can set the copy resolution used for AUTO and MANUAL ( ) exposure mode.
Prevention of OC copies when the SPF is up function (d-Copia 201D)
When enabled, this function may help prevent wasteful use of toner that occurs when the OC cover is not completely closed. If the start ( ) key is pressed when the OC cover is not completely closed, " " will appear in the display and copying may not take place. If copying does not take place, copying can be performed by pressing the start ( ) key again, however, the scan size set in "Copy effective paper width setting function" (program numbers 25, 26) will be used. If the OC cover is completely closed after " " appears, copying will take place at the normal size.

TONER SAVE MODE

Press the exposure mode selector key to select the MANUAL ( ) mode.
Press and hold down the exposure mode selector key for approximately 5 seconds. The MANUAL ( ) indicator will go out and the PHOTO ( ) indicator will begin to blink. The light and dark indicator marked "5" will light up, indicating the standard toner mode is active.
To enter the toner save mode, press the light ( ) key. The light and dark indicator marked "1" will light up, indicating the toner save mode is selected.
Press the exposure mode selector key. The PHOTO ( ) indicator will stop blinking and light up steadily. The light and dark indicator marked "3" will light up. The toner save mode is now active.
To return to the standard mode, repeat the procedure but use the dark ( ) key to select exposure level "5" in step 3.

USER PROGRAMS

The user programs allow the parameters of certain functions to be set, changed, or canceled as desired.
Setting the user programs
Press and hold down the light ( ) key for more than 5 seconds until all the alarm indicators ( , , ) blink and " " appears in the display. Use the left copy quantity ( ) key to select a user program number (For the user program numbers, see the following table.). The selected number will blink in the left side of the display. Press the start ( ) key. The entered program number will be steadily lit and the currently selected parameter number for the program will blink on the right side of the display. Select the desired parameter using the right copy quantity ( ) key. The entered parameter number will blink on the right of the display.
Program No. Mode Auto clear time Preheat mode Auto power shut- off mode Auto power shut- off timer *7 *1 *10 sec., sec., sec., min., min. ON, 2 Parameters 30 sec., *sec., sec., min., sec., OFF 5 min., 120 min.,

OFF 60 min.,

5 min., 2 30min., min., min.

Program No. 21 24

Mode SPF automatic original discharge time (d-Copia 201D) Resolution of AUTO & MANUAL mode Reset factory Prevention of OC copies when the SPF is up function Copy effective paper width setting function (Bypass tray) Copy effective paper width setting function Selection of copy start state (Polygon rotation on/off) Fusing temperature setting when the bypass tray is used 5 **1 ***1

Cabinet

Wipe the cabinet with a soft, clean cloth.
Document glass and the back side of the SPF
Stains on the document glass, SPF scanning window or SPF roller will also be copied. Wipe the document glass, SPF scanning window and SPF roller with a soft, clean cloth. If necessary, dampen the cloth with a glass cleaner.
Document glass/SPF scanning window

Orignal cover/SPF

SPF roller

SPF scanning window

Transfer charger
If copies start becoming streaky or blotchy, the transfer charger may be dirty. Clean the charger using the following procedure.
Turn the power switch off. (p.13) Ensure that the multi-bypass tray is open and then open the side cover while pressing the side cover open button. Take the charger cleaner out by holding the tab. Set the charger cleaner onto the right end of the transfer charger, gently slide the cleaner to the left end, and then remove it. Repeat this operation two or three times.
Slide the charger cleaner from the right end to the left end along the groove of the transfer charger. If the cleaner is stopped on the way, smudges on copies may occur.
Return the charger cleaner to its original position. Close the side cover by pressing the round projections near the side cover open button.
Turn the power switch on. (p.12)

TROUBLESHOOTING THE UNIT

This chapter describes misfeed removal and troubleshooting. For problems with the printer function or the scanner function, see the online manual or the Help file for the printer/scanner driver.

TROUBLESHOOTING

If any problem occurs, check the list below before your authorised service representative.
Problem Possible cause Unit plugged in? Power switch on? Side cover closed securely? Front cover closed? Solution Page Plug the unit into a grounded outlet. 12 Turn the power switch on. 12 Gently close the side cover. 10 Gently close the front cover and then 10 close the side cover. Is the original placed face Place the original face down on the document glass or face up in the 47, 48 down on the document glass or face up in the SPF? SPF. Unlock the scan head locking switch. Is the scan head locking 9 switch locked? Is original image too dark or Adjust the exposure manually. 49 too light? Is the unit in the automatic Adjust the automatic exposure level. 50 exposure mode? Is the unit in the photo Cancel the photo exposure mode. 49 exposure mode? Document glass or SPF dirty? Clean regularly. 60 Original smudged or blotchy? Use a clean original.

Indication

MISFEED REMOVAL
When the misfeed ( ) indicator blinks or blinks in the display, the unit will stop because of a misfeed. If a misfeed occurs when using the SPF, a number may appear in the display after a minus sign. This indicates the number of the originals that must be returned to the original feeder tray after a misfeed. Return the required number of originals. Then this number will disappear when copying is resumed or the clear ( ) key is pressed. When the SPF misfeeds an original sheet, the unit will stop and the SPF misfeed ( ) indicator will blink, while the misfeed ( ) indicator will remain off. For a misfeed of originals in the SPF, see "D: Misfeed in the SPF (dCopia 201D)" (p.68).
Check the misfeed location. Remove the misfed paper following the instructions for each location in the illustration below. If the misfeed ( ) indicator blinks, proceed to "A: Misfeed in the paper feed area" (p.65).
If paper is misfed here, proceed to "B: Misfeed in the fusing area". (p.66)
If the misfed paper is seen from this side, proceed to "C: Misfeed in the transport area". (p.67)
If paper is misfed here, proceed to "A: Misfeed in the paper feed area". (p.65)
A: Misfeed in the paper feed area
Gently remove the misfed paper from the paper feed area as shown in the illustration. When the misfeed ( ) indicator blinks, and the misfed paper is not seen from the paper feed area, pull out the paper tray and remove the misfed paper. If the paper cannot be removed, proceed to "B: Misfeed in the fusing area".
The fusing unit is hot. Do not touch the fusing unit when removing misfed paper. Doing so may cause a burn or other injury. Do not touch the surface (green portion) of the drum cartridge when removing the misfed paper. Doing so may damage the drum and cause smudges on copies. If the paper has been fed through the multi-bypass tray, do not remove the misfed paper through the multi-bypass tray. Toner on the paper may stain the paper transport area, resulting in smudges on copies.
Close the side cover by pressing the round projections near the side cover open button. The misfeed ( ) indicator will go out and the start ( ) indicator will light up.
B: Misfeed in the fusing area
Lower the fusing unit release lever.

Fusing unit release lever
Gently remove the misfed paper from under the fusing unit as shown in the illustration. If the paper cannot be removed, proceed to "C: Misfeed in the transport area".
The fusing unit is hot. Do not touch the fusing unit when removing misfed paper. Doing so may cause a burn or other injury. Do not touch the surface (green portion) of the drum cartridge when removing the misfed paper. Doing so may cause smudges on copies. Do not remove the misfed paper from above the fusing unit. Unfixed toner on the paper may stain the paper transport area, resulting in smudges on copies.
Raise the fusing unit release lever and then close the side cover by pressing the round projections near the side cover open button. The misfeed ( ) indicator will go out and the start ( ) indicator will light up.
C: Misfeed in the transport area
See "B: Misfeed in the fusing area" (p.66).

Open the front cover.

To open the front cover, see "INSTALLING THE TONER/DEVELOPER CARTRIDGE" (p.10).
Rotate the roller rotating knob in the direction of the arrow and gently remove the misfed paper from the exit area.

Roller rotating knob

Raise the fusing unit release lever, close the front cover and then close the side cover by pressing the round projections near the side cover open button. The misfeed ( ) indicator will go out and the start ( ) indicator will light up.
D: Misfeed in the SPF (d-Copia 201D)
An original misfeed may occur at one of three locations: if the misfed original is seen from the document feeder tray, (A) in the document feeder tray; if the misfed original is not seen from the document feeder tray, (B) in the exit area or (C) under the document feeder cover. Remove the misfed original following the instructions for each location. After removing the jammed paper, be sure to press the clear key to clear the misfeed error state. (A) Open the document feeder cover and pull the misfed original out from the document feeder tray. Press the SPF jam release lever (see below) while you remove the original. Close the document feeder cover. Open and close the SPF to clear the SPF misfeed ( ) indicator. If the misfed original cannot be easily removed, proceed to (C).
Document feeder cover SPF jam release lever
(B) Open the SPF and rotate the roller to remove the misfed original from the exit area. If the misfed original cannot be easily removed, proceed to (C).

Roller

(C) If the original does not move easily into the exit area, remove it in the direction of the arrow while rotating the knob.