OLIVETTI LASERFAX - ZUBEHR
B0421 B0329 B0545 B0546 B0412 B0413 B0414 B0415 B0442 B0444 BB0043 b0421 b0329 b0545 b0546 b0412 b0413 b0414 b0415 b0442 b84436 b0043 Olivetti OFX 8800 Olivetti OFX 8800 Olivetti OFX 9000 Olivetti OFX 9000 (Doppelpack) Olivetti OFX 9100 Olivetti OFX 9100 Olivetti OFX 9100 Olivetti OFX 9200 Olivetti Friendly Cart - JP 90 / 90+, Nomadjet 100/200 Olivetti Friendly Cart - JP 90 / 90+, Nomadjet 100/200 Olivetti JP 150/250/350/360/470, OFX 500/1000-3200, (Monoblock) Olivetti JP 150 - 470, Jet-Lab 500 (Monoblock) Olivetti JP 790-795, 883 Monoblock Olivetti JP 790-795, 883 Kit (1Druckkopf befllt + 1 NF) Olivetti JP 790-795, 883 Kit (1Druckkopf befllt + 1 NF) 8 Stck Olivetti JP 883 (High Quality) 1 VE = Jet-Lab 500
Toner Cart 8800 Imaging Unit 8800 Imaging Unit Imaging Unit Toner Toner Drum Toner Tinte black PJ-11 Tinte color PJ-12 Tinte black, 24 ml FPJ-VE = 1 Unit 1 VE = 1 Unit 1 VE = 1 Unit 1 VE = 2 Units 1 Stck 1 Stck 1 Stck 1 Stck 1 Stck 1 Stck 1 Stck 500 Seiten 150 Seiten 180 Seiten 2x550 Seit. 2x130 Seit. 180 Seiten 1050 Seiten 550 Seiten 480 Seiten 320 Seiten 5K 30 K 3,3 K 6,6 K 3K 6K 20 K 7,5 K 270 Seiten
OLIVETTI TINTEN (TALLY KOMPATIBEL)
Tinte 3-frbig FPJ-Stck Tinte 3-frbig 1 Stck
M0546A (B0047) m0546a B0044 B0205 B0217 b0288 B0218 B0261 b0044 b0205 b0217 b0288 b0218 b0261
black M0546 neutral 1 VE = 1 Set Tinte 3-frbig Tinte 3-frbig 1 VE = 1 Set 1 Stck 1 Stck 1 Stck 1 Stck 1 Stck
Olivetti ArtJet 10 / 12 / 20 / 22, StudioJet 300, CopyLab 200, OFX 800 (Jumbo) Tinte black XP-01 Olivetti ArtJet 10 / 12 / 22, StudioJet 300 / JetLab 600, CopyLab 200, OFX 800 (Standadrdpatrone) Olivetti ArtJet 20 / 22, StudioJet 300 (Jumbo) Olivetti ArtJet 10 / 12, JetLab 600, CopyLab 200 (Jumbo) Tinte black XP-11 Tinte 3-frbig XP-02 Tinte 4-frbig XP-03
b0289 b0315 b0251 B0336 B0543 B0380 B0495 B0496 B0497 B0498 B0508 B0509 b0289 b0315 b0251 b0336 b0543 b0380 b0495 b0496 b0497 b0498 b0508 b0509 Olivetti ArtJet 22, StudioJet 300 (Standardpatrone) Olivetti ArtJet 12, JetLab 600, CopyLab 200 (Standardpatrone) Olivetti Aufbewahrungsbox (Garage) Olivetti Fax-Lab 270 / 275 / 300 / 310 / 350 / 360, Jet-Lab 400 Olivetti Fax-Lab 270 / 275 / 300 / 310 / 350 / 360, Jet-Lab 400
Tinte 3-frbig XP-12 Tinte 4-frbig XP-13 fr XP-Serie Tinte black FJ-31 Tinte black FJ-Stck 1 Stck 1 Stck 1 Stck 1 VE = 2 Stck 1 Stck 1 Stck 1 Stck 1 Stck 1 Stck 1 Stck 1 Stck 450 Seit. 450 Seit. 160 Seit 240 Seiten 200 Seiten
Olivetti Jet-Lab 400 Tinte 3-frbig FJ-32 Olivetti Any Way Simple, Any Way Bluetooth, Any Way Photo, Any Way Photo Tinte black IN-502 Wireless Olivetti Any Way Simple, Any Way Bluetooth, Any Way Photo, Any Way Photo Tinte color IN-504 Wireless Tinte color IN-506 Olivetti Any Way Photo, Any Way Photo Wireless photo Tinte 3-color IN-508 Olivetti May Way Standard Olivetti Any Way Simple, Any Way Bluetooth, Any Way Photo, Any Way Photo Tinte black IN-501, Wireless 11ml Olivetti Any Way Simple, Any Way Bluetooth, Any Way Photo, Any Way Photo Tinte color IN-503, Wireless 7ml

Cash Register

ECR 5800
QUICK REFERENCE GUIDE GUIDE DE REFERENCE KURZANLEITUNG GUA DE REFERENCIA RPIDA BEKNOPTE HANDLEIDING GUIA PRATICO DE REFERIMENTO
ENGLISH PORTUGUS NEDERLANDS ESPAOL DEUTSCH FRANAIS
PUBLICATION ISSUED BY: Olivetti Tecnost, S.p.A. 77, Via Jervis - 10015 Ivrea (Italy)
Copyright 2002, Olivetti All rights reserved

Quick Reference Guide

QUICK START
Unpack the cash register and place it on a level, stable, vibration-free and dust-free surface near a grounded power outlet. Plug the cash register to the grounded power outlet and then insert four charged "AA" size memory backup batteries in the battery compartment as explained in the section Inserting/Replacing Batteries of the Instructions Manual. During cash register operation, all transaction data for the management report are stored in the register's memory. This memory also holds all optional programming information. The memory back-up battery system keeps this information stored in memory when the cash register is turned off or when a power failure occurs. All data stored in memory will be canceled if you unplug the cash register from the electrical wall outlet without back-up battery supply. Load the paper roll and install the inked ribbon cartridge by following the procedures described in the related sections of the Instructions Manual.

1. SET THE DATE

1. Turn the PRG key to the PRG position. 2. Type the [numeric keys] representing the current date. Remember to use the DDMMYY format. Single digit numbers for months and days must be preceded by a zero (0). 3. Press the [#/ST/NS] key to store the date. The date entered is printed. 4. Press the [Clear] key to program another feature or exit the program mode by turning the PRG key to the OFF position. Example: Set a date of January 18, 2001. Type/Press: [180101] + [#/ST/NS] NOTE: If you wish that the date just entered be printed and displayed in the month/day/year format, type [40] and then press the [Void] key.

2. SET THE TIME

1. Turn the PRG key to the PRG position. 2. Type the [current time] using the HH:MM format. NOTE: Time is set according to international, or military time (24-hour clock format). To correctly enter this time, simply add 12 to all hours in the PM. For example, to set the time to 9:00 AM, type [0900]; to set the time to 2:15 PM, type [1415]. 3. Press the [Qty/Date] key to store the entered time. The newly defined time is automatically printed. 4. Press the [Clear] key to program another feature or exit the program mode by turning the PRG key to the OFF position. Example: Set the time at 3:30 PM. Type/Press: [1530] + [Qty/Date] NOTE: If you wish that the time just entered be printed and displayed in the 24-hour format, type [180] and then press the [Void] key.

ENGLISH

3. SET YOUR LANGUAGE
1. Turn the PRG key to the PRG position. 2. Type [19] followed by [1] and [Void] to print in Spanish, [19] followed by [2] and [Void] to print in French, [19] followed by [3] and [Void] to print in German. To print in English again (the default language), type [19] followed by [0]. 3. Press the [Clear] key to program another feature or exit the program mode by turning the PRG key to the OFF position. Example: Change the language in which the cash register prints the customer receipt and journal record from English into French. Type/Press: [19] + [2] + [Void]

4. PERSONALIZE THE RECEIPT HEADER
1. Turn the PRG key to the PRG position. 2. Type [3] followed by the [number] of the line (n = 1.5) you wish to modify and then press the [Return] key. The letter "P" appears on the left-hand side of the displays and the message "LOGO LINE n" is displayed on the operator display where n is the number of the line to change. 3. Using the cash register's alphanumeric keypad or the Character Code Table provided in the Appendix of the Instructions Manual, type the character code string for the letters to be entered on this particular line selected. Remember that up to 24 characters can be entered (spaces included). If you wish to center a writing, you will need to calculate the empty character spaces before and after your string and type the appropriate blank space code (00) in the corresponding places. Use the [Void] key as backspace function to clear an incorrect character entry if necessary. 4. Press the [Check] key again to store the newly defined header line. This new line is automatically printed. 5. Repeat steps 3 and 4 if you wish to program the remaining three programmable header lines. 6. Press the [Clear] key to program another feature or exit the program mode by turning the PRG key to the OFF position. Example: Change the fourth line of the default header to *PLEASE COME AGAIN* with the appropriate spaces before and after to center this new string and using the Character Code Table provided in the Appendix of the Instructions Manual.
Type/Press: [3] + [4] + [Return] + [00] + [00] + [00] + [54] + [00 76] + [Check] NOTE: If you wish to use the alphanumeric keypad to type the header PLEASE COME AGAIN, type [00] for the spaces and then press the Dept key corresponding to the letter wanted. If the letter wanted is on the bottom half of the key, firstly press the [Dept Shift] key and then the related [Dept] key. The asterisk can only be entered by typing its corresponding code (76) from the Character Code Table provided in the Appendix of the Instructions Manual.
5. PROGRAM THE EURO EXCHANGE RATE
1. 2. 3. 4. 5. Turn the PRG key to the PRG position. Type the [decimal point position] of the exchange rate (0-8 digits after the decimal point). Type the [decimal point position] of the converted amount (0-3 digits after the decimal point). Type the [exchange rate] using up to six digits without specifying any decimal point. Press the [Euro] key to store the exchange rate. The rate entered is automatically printed along with the caption "EURO". 6. Press the [Clear] key to program another feature or exit the program mode by turning the PRG key to the OFF position.

Example: Program an exchange rate of 0.64 to the Euro. Type/Press: [2] + [2] + [000064] + [Euro] Program the Cash Register to Use the Euro Currency Only When the Euro becomes the only valid currency in your country, you can program the cash register to work accordingly by disabling the Euro convert function. A prerequisite to working with the Euro as the base currency is for the decimal point be programmed to the x.xx format (refer to the Change the Decimal Point Position section further on). 1. Turn the PRG key to the PRG position. 2. Type [28] to indicate the machine condition to be changed (Euro convert function allowed/not allowed) and then type [1] to disable the Euro convert function. 3. Press the [Void] key to confirm the setting made. 4. Exit the program mode by turning the PRG key to the OFF position. Example: Program the cash register to disable the Euro convert function. Type/Press: [28] + [1] + [Void]

6. SET A FIXED VAT RATE

1. Turn the PRG key to the PRG position. 2. Type the [numbers] which represent the VAT (1 for VAT1, 2 for VAT2, 3 for VAT3, 4 for VAT4). 3. Press the [Tax Set] key. The message "TAX n RATE" appears on the operator display where n is the number representing the VAT rate. 4. Type the VAT rate. Up to five digits can be used, and you MUST enter three digits after the desired decimal place. For example, to enter a 5.5% VAT rate, type [5500]; to enter a 16% VAT rate, type [16000]. 5. Press the [Amt Tend/Total] key. The tax rate entered followed by its alphanumeric identifier (T1, T2, T3 or T4) is printed. 6. Press the [Clear] key to program another feature or exit the program mode by turning the PRG key to the OFF position. Example: Set a VAT1 rate of 5.5%, VAT2 rate of 7%, VAT3 rate of 16% and a VAT4 rate of 20%. Type/Press: [1] + [Tax Set] + [5500] + [Amt Tend/Total] [2] + [Tax Set] + [7000] + [Amt Tend/Total] [3] + [Tax Set] + [16000] + [Amt Tend/Total] [4] + [Tax Set] + [20000] + [Amt Tend/Total]
7. CHANGE THE DECIMAL POINT POSITION
The decimal point setting is preset to the x.xx format. This format can be changed, as needed, to one of the other settings below. 1. Turn the PRG key to the PRG position. 2. Type the status number [0, 1, 2 or 3] to select the desired format as indicated in the following table: Status Number Format x x.x x.xx x.xxx
3. Press the [-%/RA] key to set the new format. The setting made is automatically printed along with the caption "R-A-". 4. Press the [Clear] key to program another feature or exit the program mode by turning the PRG key to the OFF position. Example: Program the cash register so that two digits are left after the decimal point. Type/Press: [2] + [-%/RA]
8. CREATE A PRICE LOOK-UP (PLU)
1. Turn the PRG key to the PRG position. 2. Press the [Qty/Date] key. The message "PLU PRICE" appears on the operator display and the number 001 is displayed on the left-hand side of the displays to indicate the first PLU number. If you wish to change the PLU number from 001 to another number such as 30, type [030] and then press the [PLU] key. 3. Type the [unit price] that you wish to assign to that PLU. 4. Press the appropriate [Department] key to assign the PLU to a Department from 1 to 20. Use the [Dept Shift] key for departments from 21-40. The message "PLU NAME" is displayed while the PLU number, item price and department number are printed. 5. With reference to the Character Code Table in the Appendix of the Instructions Manual or by using the alphanumeric keypad, define a maximum 10-character description to the PLU item. For example, the item Coffee will have the [45 45] character code string if the Character Code Table is used. 6. Press the [Check] key to store the PLU item description which is printed. The cash register automatically switches to the next PLU item number. 7. Press the [Qty/Date] key to program another feature or to exit the program mode by turning the PRG key to the OFF position. Example: Create PLU 1 with a unit price of 2.69 assigned to Department 3 and name this item Coffee by using the Character Code Table provided in the Instructions Manual and then create PLU 320 with a unit price of 5.00 assigned to Department 33 and name this item Book by using the alphanumeric keypad.

Type/Press: [Qty/Date] + [269] + [Department 3/23] + [45 45] + [Check] + [320] + [PLU] + [500] + [Dept Shift] + [Dept 13/33] + [Dept 2/22 Dept 15/35 Dept 15/35 Dept 11/31] + [Check] + [Qty/Date]
9. LINK AN HDLO, TAX STATUS, SINGLE/MULTIPLE ITEM SALE, ITEM PRICE AND DESCRIPTION TO A DEPARTMENT
A 5-digit department status can be programmed by using the following options: Dept. Def. 0 = Standard Dept. 1 = Gallonage Dept. Single/Multiple Item Sale 0 = Multiple item 1 = Single item cash High Digit Lock Out 0 = No HDLO 1 = 1 digit (0.09) 2 = 2 digits (0.99) 3 = 3 digits (9.99) 4 = 4 digits (99.99) 5 = 5 digits (999.99) 6 = 6 digits (9999.99) Tax Status 00 = Non tax. 01 = VAT= VAT= VAT= VAT4
1. Turn the PRG key to the PRG position. 2. Type the [department definition], [single/multiple item sale], [HDLO] and [tax status] options by referring to the previous table. 3. Press the [Subtotal w/Tax] key to confirm your entry. The message "DEPT PRICE" appears on the operator display and the codes of the options programmed will be printed along with the caption "SUBTTL". 4. Type a [price] to assign to a specific item and then press the relative [Department] key. The message "DEP n NAME" appears on the operator display and the amount entered is printed along with the caption "DEPT n", where the n in both cases represents the department number. 5. With reference to the Character Code Table provided in the Appendix of the Instructions Manual or by using the alphanumeric keypad, define the department descriptor (max 12 chars, spaces included). 6. Store the item descriptor entered by pressing the [Check] key. 7. Press the [Clear] key to program another feature, otherwise exit the program mode by turning the PRG key to the OFF position. Example: Assign a no HDLO, VAT3, multiple item sale, a price of 2.50 to an item in Standard Department 1 named Groceries defined using the Character Code Table in the Instructions Manual. Type/Press: [0] + [0] + [0] + [03] + [Subtotal w/Tax] + [250] + [Department 1/21] + [59] + [Check] NOTE: If you wish to rename the Groceries department back to DEPT 1, repeate the procedure and enter the character code string [00 31] (or type the related characters on the alphanumeric keypad).
10. PROGRAM A SECRET CODE LINKED TO A CLERK NUMBER
1. Turn the PRG key to the PRG position. 2. Type [121] and then press the [Void] key to activate the Clerk system. 3. Type [444444] and press the [Amt Tend/Total] key. The symbol "C" is displayed on the left-hand side of the operator and customer displays while the message "CLERK PASS" is displayed on the operator display. 4. Type a number to which the secret code will be linked. 5. Set a three-digit secret code by typing three [numeric keys]. 6. Press the [Clerk] key. Repeat the above operations (from step 4 to step 6) to assign a secret code to the remaining 14 Clerks or use the [Clear] key to exit from Clerk Secret Code programming. If you wish to change the clerk's secret code and the Clerk system is already activated, there is no need to perform step 2 above. Example: Assign secret code 106 to Clerk 1 for the first time. Type/Press: [121] + [Void] + [444444] + [Amt Tend/Total] + [1] + [106] + [Clerk]

11. DEFINE A CLERK NAME

To define a clerk name you can use either the Character Code Table provided in the Appendix of the Instructions Manual or you can type the name directly by using the alphanumeric keypad. Using the Character Code Table in the Instructions Manual: 1. Turn the PRG key to the PRG position. 2. Type the number of the Clerk whose name is to be defined. 3. Press the [Return] key. The letter "P" appears on the left-hand side of the operator and customer displays while the message "CLERK NAME" is displayed on the operator display. 4. With reference to the Character Code Table in the Appendix of the Instructions Manual, type the string of character codes to define the letters of a name and then press the [Check] key. Up to a maximum of 24 digits can be entered. The name entered will be printed. Example: Program Christina as the name for Clerk number 1. Type/Press: [1] + [Return] + [02] + [Check] Using the alphanumeric keypad: 1. Turn the PRG key to the PRG position. 2. Type the number of the Clerk whose name is to be defined. 3. Press the [Return] key. The letter "P" appears on the left-hand side of the operator and customer displays while the message "CLERK NAME" is displayed on the operator display. 4. Type the [Dept] key corresponding to the letter wanted. If the letter wanted is on the bottom half of the [Dept] key, press the [Dept Shift] key first then the related [Dept] key. After entering the letter string wanted, press the [Check] key. The name entered will be printed. Example: Program Alex as the name for Clerk number 2. Type/Press: [2] + [Return] + [1/21 12/32 5/25] + [Dept Shift] + [4/24] + [Check]

Guide de Reference

DMARRAGE RAPIDE
Dballer la caisse enregistreuse et la placer sur une superficie niveau, stable, labri de vibrations et de la poussire, proximit dune prise de terre. Brancher la caisse la prise de terre, puis insrer quatre batteries tampon "AA" charges dans le compartiment batteries, en suivant les explications de la section Installation et remplacement des piles dans le Manuel dinstructions. Lorsque la caisse est en service, toutes les donnes denregistrement ncessaires aux compterendus de gestion sont mmorises dans la mmoire de la caisse enregistreuse. Cette mmoire contient aussi toutes les informations concernant les programmes fonctionnels. Le systme de sauvegarde des donnes en mmoire conserve ces informations grce des piles lorsque la caisse nest plus alimente ou en cas de panne de courant. Si lon dconnecte la caisse sans avoir mont les piles, toutes les donnes en mmoire seront perdues. Installez le rouleau de papier et la cartouche dencre en suivant la procdure dcrite dans les sections correspondantes du manuel Instructions d'emploi.