Display Alphanumeric keypad * key # key

Reference 6

Part Phone book
Description The first number displayed is the last number called. The name search can be effected using the Navigator, or by entering the initial of the name you want to find. Entries can be made to the phone book only from the computer. Provides access to all the fax functions. You can browse using the Navigator, confirm your selections using the Confirm key, or cancel selections using the Cancel key. Select and confirm the options shown on the display. Browse menu items on the display or entries in the phone book. Modify the resolution to be used when sending faxes. Displays the number of copies setting. The number displayed decreases as each copy is printed. Set the number of copies to be made using the plus (+) and minus (-) keys. The number selected is displayed on the Copy counter. Cancel a job immediately. Restore settings to their factory values. Select the print and copy quality. Photo quality is recommended for copying images, or when printing on special ink-jet paper. Lighten or darken the copy. Start copying in B/W. Press and keep held down to activate the "Fit to page" functionality. This functionality is not available when documents are loaded onto the automatic document feeder. Start copying in colour. Press and keep held down to activate the "Fit to page" functionality. This functionality is not available when documents are loaded onto the automatic document feeder. Enabled when the printer is connected to a computer. Press to scan the document on the scanner glass or loaded onto the automatic document feeder. A Toolbox application window is displayed on the computer allowing you to scan the image directly into an application of your choice, and to customise scan settings. Start receiving or sending a black and white fax. Start receiving or sending a colour fax. Enabled when a digital camera or a compatible memory device is connected to the printer. This key flashes when printing is in progress.
Confirm Navigator Fax quality Copy counter Select number of copies Cancel Select print quality
Copy contrast Start B/W copy

Start colour copy

Start scanning
Start B/W fax Start colour fax Start printing
LEDS ON THE PRINTER FRONT PANEL
Open out the keyboard to access the compartment where the LEDs can be seen.

Indicator USB status

Description A green light indicates that a digital camera or compatible memory device is connected. A flashing light indicates that data is being transferred to the printer. A fax is present in memory (i.e. was not printed when it was received). The printer cannot be switched off without correcting the reason for the error, and printing the faxes present in memory. A fax transmission or reception error has occurred.

Fax present in memory

3 Paper error
Indicates: Paper jam. No paper in feeder. The LEDs flash when the black, photo or colour cartridges are nearly out of ink. A steady orange light indicates that the ink has run out.

Out-of-ink

PRINTER POWER SUPPLY
The printer is powered from the mains using the external AC power supply unit provided. Proceed as follows to connect the power supply unit to the electrical outlet: Insert the plug of the external AC power supply unit cable into the printer socket. Insert one end of the power cable into the power supply unit and the other end into the electrical outlet.
SWITCHING THE PRINTER ON AND OFF
Press the On/Off key. When the keyboard is closed, the two LEDs indicate if the printer is switched on and if any operating errors have occurred.

Reference 1 2

Indicator On/Off LED Error LED
Description A green light indicates that the printer is switched on. An orange light indicates that errors are signalled by the LEDs on the printer front panel.

Printer Economy Mode

After a time interval that can be modified from the Toolbox, the printer enters energy saving mode and the keyboard is disabled. The printer re-activates on receiving any signal from the computer or the keyboard. Note: Switching off the printer is not recommended as it results in the loss of the date and time.
LOADING PAPER ONTO THE AUTOMATIC SHEET FEEDER
Raise the automatic sheet feeder into its upright position, then press the paper width guide and slide it to its outermost position. Load the paper vertically (portrait orientation), with the side to print on facing the front of the printer, and positioned against the right-side guide. Note: The feeder capacity is 100 sheets of 80 g/m2 plain paper. 3 Press the left paper guide and slide it up against the left edge of the paper.

Connecting to the Telephone Network and Connecting an External Telephone
As connecting an additional telephone or other device to the fax telephone line is subject to national regulations, which vary from country to country, the illustrations on the next pages show connection examples. If, in the destination country, connection to the telephone line differs from those shown in the examples, refer to the regulations in force in the destination country. The fax is set up to be connected to the public telephone line. To connect it to a private line and use it also on a public line, refer to the section Installing the Fax. In the case of a multiple-socket telephone system, additional telephone devices can be connected to any of the sockets available provided that the system is of the type with multiple sockets in parallel. In this case, the dial tone is always present when the handsets of the existing telephone devices are lifted simultaneously. If the dial tone is not present when the hand-sets of the pre-existing telephone devices are lifted simultaneously, this means that the telephone system is of the type with multiple sockets in series. In this case, the additional telephone devices must be connected directly to the printer as already explained above. If this is not possible, connect the printer to the socket with the highest priority. Each country uses a specific type of telephone plug. The most frequently-used connections are illustrated below.
Connection Case 1 (Italy and Switzerland)
Insert the connector of the additional telephone or other device (see the related illustration) into the "EXT" socket. If it is not possible to connect the additional telephone directly to the "EXT" socket, use the specific adapter supplied with the additional telephone. A B C D = = = = telephone line input (LINE IN) wall socket for telephone plug external telephone with or without adapter, telephone answering device (EXT) socket for external telephone, telephone answering device or other unit.

Connection Case 1 Italy

Connection Case 1 Switzerland

Connection Case 2

Insert the connector or plug of the additional device into the socket (see the related illustration). A B C D = = = = telephone line input (LINE IN) wall socket for telephone plug external telephone, with or without adapter, telephone answering device (EXT) socket for external telephone, telephone answering device or other unit.

Connection Case 3

Insert the plug of the additional unit into the wall socket of the telephone line (see the related illustration). Using the specific adapter (as for the first type of connection), you can connect another device to the printer "EXT" socket for connection to the telephone line. A B C D = = = = telephone line input (LINE IN) wall socket for telephone plug external telephone, with or without adapter, telephone answering device (EXT) socket for external telephone, telephone answering device or other unit.

INSTALLING THE FAX

After having connected the telephone cable and the power supply cable, press the On/Off key to switch on the printer. The printer executes a series of autodiagnostic tests displaying, at the end, a message indicating that the printer is ready for use as a fax.

Installation Procedure

1 When switched on, the display shows the languages available in sequence, each uniquely identified by a 2-digit code "nn". Enter the keys relative to the number "nn" corresponding to the language you want to set. Confirm your selection by pressing the key. Alternatively, press the key to return to step 1.
The possible choices for the destination country are shown on the display. Each country is uniquely identified by a 2-digit code "nn". Enter the keys relative to the number "nn" corresponding to the destination country you want to set.
Confirm your selection by pressing the Installation is terminated.
key. Alternatively, press the

key to return to step 3.

To enter the date and time, press the Menu key followed by the Confirm key. The message "SET DATE/TIME" appears on the display. Enter the data using the alphanumeric keypad then press the Confirm key. Note: The date and time can also be sent from the computer by selecting Toolbox > Settings > Fax settings. Note: If there is a power failure, the date and time settings are lost. When the printer is next switched on, a message is displayed prompting you for the date and time again. Note: If you want to change the Destination country setting, press in sequence the keys C + * + *. The display allows you to choose your language and Destination country. Enter the data and then switch off the printer. When you switch the printer on again, you must enter the correct date and time.
Country Argentina Australia Austria Belgium Brazil Chile China Colombia Czech Republic Denmark Finland France Germany Greece Hong Kong India Israel Italy

PRINTING PHOTOS FROM A DIGITAL CAMERA
When a digital camera or a compatible memory device is connected to the printer, the Start printing key illuminates. Pressing the Start printing key causes the Photo Index to be printed, a document reproducing all the images present in the memory connected to the printer, and that allows you to choose the images to print, the number of copies and the paper size. To print the Photo Index: 3 Leave connected the memory used for printing the Photo Index. Position the Photo Index, completed in all its parts, on the scanner glass. Press the Start printing key until the print operation starts (approx. 8 seconds): the photos are printed as indicated. The pre-configured print quality is suitable for special ink-jet paper, and can be modified from the printer keyboard. The photos printed are automatically adjusted to fit the size of the paper in the automatic feeder.
PRINTING PHOTOS FROM A PICTBRIDGE DIGITAL CAMERA
To obtain the best results when printing photos, you should use a colour cartridge with a photo cartridge. See Replacing the Ink Cartridges. 3 Load photo paper onto the printer. Make sure the PictBridge digital camera is switched on and connected to the printer. Printing is controlled directly from the camera, therefore the Start printing key is disabled.
Read the cameras User Guide for instructions on how to print photos. During printing, the Start printing key flashes. Note: If the paper size loaded is different from the paper size set from the digital camera, printing will not be correct, or an error message is displayed.
PRINTING PHOTOS FROM A DPOF DIGITAL CAMERA
To obtain the best results when printing photos, you should use a colour cartridge with a photo cartridge. See Replacing the Ink Cartridges The printer is able to recognise the DPOF information that has been associated with the images to be printed. The Start printing key illuminates on recognising the DPOF format files. Load photo paper onto the printer. Make sure the DPOF digital camera is turned on and connected to the printer. Select the print quality according to your printing requirements. Press the Start printing key on the keyboard to print the photos you have selected, associating the DPOF indications of the digital camera.

PHONE/FAX: After a certain number of rings (modifiable selecting Toolbox > Settings > Fax settings > Installation > Reception), the printer connects to the telephone line and is able to detect if the incoming call is a fax or voice call. In case of a voice call, the printers ring tone changes (after the default number of rings), and it rings for the time defined by Fax/tel timer (modifiable selecting Toolbox > Settings > Fax settings > Installation > Reception), to allow the call to be answered. If the call is not answered, it returns to the printer. In the case of a Fax call, the fax is received and printed.
ANSWERING DEVICE/FAX: The answering device must be connected to the printer. In this Reception mode, the number of rings preceding intervention of the answering device (see the answering devices manual), must be less than that (modifiable selecting Toolbox > Settings > Fax settings > Installation > Reception) after which the incoming call is received by the printer; in this way the answering device receives the line first. Even when the call is answered by the answering device, the printer modem is able to recognise if it is a Voice or Fax call. In the case of a Voice call it does not intervene, otherwise it receives and prints the fax. Note: If an answering device is connected to the printer, the Reception mode selected must be the ANSWERING DEVICE/FAX.

SENDING A FAX

Faxes can be sent in a number of ways: From the keyboard Using the automatic document feeder From the computer, see "Using the Printer with a Computer".
Sending a Fax From the Keyboard
To send a fax, switch on the printer, check that it is connected to the telephone line and wait for it to come online. Place the original on the scanner glass, press the Start colour fax or Start B/W fax key to scan the document using the scanner, and load it into memory. While the document is being scanned, the message "SAVING PAGE" appears on the display. Note: When sending a colour document, make sure that recipient is able to receive colour faxes. 5 When scanning completes, the display prompts you to scan other pages. Press the key to scan another page, or the key to terminate the scanning phase and send the fax.
Enter the telephone number of the fax device to which you want to send the fax, using: The alphanumeric keypad (manual send); at the end press the Start fax key. The phone book, selecting the number from the list of numbers present (automatic send with phone book); at the end press the Start fax key.
Sending a Fax Using the Automatic Document Feeder
3 To send a fax, switch on the printer, make sure that it is connected to the telephone line and wait until it comes online. Place the document (or documents) in the automatic document feeder. Enter the fax number of the recipient using the alphanumeric keypad on the keyboard, or call up the number from the phone book, then press the Start fax key. Note: When sending a colour document, make sure first that the contact is able to receive colour faxes. 4 The printer automatically scans all the pages present in the automatic document feeder, and sends them to the destination fax.

PRINTING FAX REPORTS

Printing fax activity reports can be activated from the printer keyboard by pressing the Menu key and selecting Print report using the Navigator. The printer proposes two printing possibilities on the display: Last transmission: Press Confirm to print. Fax activities: Press Confirm to print.
The last transmission report is also printed automatically whenever a transmission fails. You can change the report printing settings from the computer by selecting Toolbox > Settings > Fax settings, and choosing between: Always, Failed (default setting), Never. The fax report provides a printout of the fax journal, made up of a list of 42 items, relating to the fax activities. The journal is printed automatically for every 32 operations executed.
Fax Report for Power Failure
If a power failure occurs, any messages which have been saved are lost. When the printer is next switched on, an activity report is printed with the date and time of the power failure, and indicating the presence of any documents in memory. The correct date and time must be re-entered.
MODIFYING FAX SETTINGS: RESOLUTION AND CONTRAST
You can adjust fax resolution by pressing the Fax quality key. The following options are available: Normal, Fine and Photo, for both B/W and Colour modes. For example, when sending a document such as a photo, the resolution must be set as either Fine or Photo. You can also modify the resolution while a multiple-page document is being scanned. The change takes effect from the next page printed after the modification.
MODIFYING RING TYPE ON RESPONSE (RING DISTINCTION)
The printer emits sounds by means of its ring, buzzer and internal speaker. You can change the volume for each of these: Ring volume: this is the ring of the telephone or the Answering device/Fax (the printer has recognised an incoming Voice call and redirects it to the telephone. This function is only active in Phone/fax mode). Volume buzzer: signals a reception or transmission error. Volume speaker: can be used to hear the line tone when dialling the number. (This option is disabled in the default settings.)
These 3 volumes can be changed only from the Toolbox application.

USING THE PHONE BOOK

When you press the Phone book key, the display shows the last fax number used. To search for a given name, press the Phone book key again. The first number in the list is displayed. You can now: Scroll through the numbers entered using the Navigator and, when you find the name you are looking for, start the call by pressing on the Start colour fax or Start B/W fax key. Press the numeric key associated with the initial letter of the name present in the phone book. Use the Navigator to scroll to the name you are looking for and press the Start colour fax or Start B/W fax key to call the number. Note: To call up a name beginning with the letter A, you must press key 2 once only; to call up a name beginning with the letter C, you must press the key 2 three times. This same method must be used for the other letters in the alphabet present on the alphanumeric keypad.

The pop-up windows displayed also allow you to choose whether you want to continue printing or to cancel the print operation.

THE TOOLBOX

The Toolbox application allows you to print, copy, scan, send and receive faxes, from a single window on the computer screen. From the Toolbox main screen, you can: Print images and make copies. Scan documents, choosing beforehand the destination. Check the amount of ink left in the cartridges installed. Access a Solutions and Assistance facility where you can: Clean and test the ink cartridge nozzles. Automatically align the ink cartridges to improve print quality. Find the address of the manufacturers web site, where you can access information on purchasing new ink cartridges. Access troubleshooting and maintenance information. Print a test page. Access the Settings function.
PRINTING, COPYING AND SCANNING FROM THE TOOLBOX
To access the Toolbox: 1 Select with your right mouse button the Olivetti icon in the Windows task bar and run the Toolbox application, or select Start > Programs or All Programs > Olivetti > Olivetti Toolbox. The Toolbox main screen is displayed. Note: In the Mac OS X environment, the Toolbox program is available by clicking on the icon present on the desktop, or by selecting it from the list of programs installed. The main area of the Toolbox contains icons representing the different tools available. Icon Print photos You can: Photocopier Browse the hard disk or memory of the non-PictBridge/DPOF digital camera connected to the computer to find the folder containing the photos to print. Select all the photos stored in the folder, or just the individual ones you want, and indicate the number of copies to print of each. Choose the type and size of the paper. Specify if the photos are to be printed on a single page, two to a page or four to a page. Print a photo index. Print the selected photos. Define the type of document to be copied. Choose the type and size of paper to print on. Define the copy quality. Lighten or darken the copy, and select colour or black and white. Select the layout for the printed copy: scan multiple pages and print them on a single page; make poster format copies indicating the number of pages over which to fit the image, clone the image the number of times required without resizing, or simply print the image on a single page. Not all types of layout are available if the copy operation is executed with the document to be copied loaded onto the automatic document feeder. Enlarge or reduce the document or photo to be copied, or automatically adjust its size so that it fits onto the paper size selected. Note: Not all the functions for modifying the image size or selecting different layouts are available when the documents for copying are loaded onto the automatic document feeder. Select the number of copies to make.

Reception (*)

Ring Volume: Set from 0 to 8. Number of rings: The printer modem listens on the telephone line and responds only after the number of rings configured; its subsequent behaviour depends on the Reception mode (*) chosen. Distinctive ring: Must be selected if two telephone numbers are active on the same line. The telephone exchange assigns two different ring tones that the printer is able to recognise during the installation procedure (this setup cannot be used in France). Fax/tel timer: For the Tel/Fax reception mode, allows you to set the length of time after which the printer receives the call as a fax. From 15 to 40 seconds can be set.
(*) The RECEPTION MODE must be selected during printer installation by following the instructions given below.
To configure reception, switch on the printer and wait until it comes online. Press the Menu key on the fax keypad and choose the Reception mode: AUTOMATIC, MANUAL, PHONE/FAX or ANSWERING DEVICE/FAX. AUTOMATIC Mode (Default setting) The printer is enabled for receiving and printing faxes. You must change this setting if an external telephone or answering device is connected. MANUAL Mode The call is always received by the telephone. If, on replying, the user recognises that the call is a fax, it can be diverted to the printer by entering the chosen code (the default code is * *) on the numeric pad of the additional phone (if Remote has been chosen for Fax setup in the Toolbox application). Note: If an additional telephone is connected to the printer, the Reception mode selected must be MANUAL.
PHONE/FAX Mode After a certain number of rings (modifiable selecting Toolbox > Settings > Fax settings > Installation > Reception), the printer connects to the telephone line and is able to detect if the incoming call is a fax or voice call. In the cae of a voice call, the printers ring tone changes (after the default number of rings), and it rings for the time defined by Fax/tel timer (modifiable selecting Toolbox > Settings > Fax settings > Installation > Reception), to allow the call to be answered. If the call is not answered, it is returned to the printer. In the case of a fax call, it is received and printed. ANSWERING DEVICE/FAX Mode The answering device must be connected to the printer. In this Reception mode, the number of rings preceding intervention of the answering device (see the answering devices manual), must be less than that (modifiable selecting Toolbox > Settings > Fax settings > Installation > Reception) after which the incoming call is received by the printer; in this way the answering device receives the line first. Even when the call is answered by the answering device, the printer modem is able to recognise if it is a Voice or Fax call. In the case of a Voice call it does not intervene, otherwise it receives and prints the fax. Note: If an answering device is connected to the printer, the Reception mode selected must be ANSWERING DEVICE/FAX.

3 Press the lever to remove the ink cartridge you want to replace. CAUTION: The black (or photo) cartridge must always be inserted into the carrier on the left, the colour cartridge in the carrier on the right.
If the cartridge removed is to be reused in the future place it in the storage/protection garage for black and photo ink cartridges, located inside the printer. When installing a new cartridge, remove the protection tape on the cartridge.
Note: This procedure illustrates how to replace a colour cartridge, however the same procedure applies for replacing black and photo cartridges. 6 Insert the new cartridge, pressing it towards the back of the printer until it clicks into place.
Lift the upper part of the printer and move the support lever. Lower the upper part of the printer until it is completely closed.
The printer automatically executes ink cartridge alignment, and ends printing a test page. Load an A4 sheet of paper and wait for printing to complete.
ALIGNING THE INK CARTRIDGES
The ink cartridges are aligned automatically by the printer whenever a new cartridge is installed. However, it is necessary to manually align the cartridges when the printed characters are not well-defined, or when lines appear wavy. Alignment can improve print quality even after having cleaned the ink cartridge nozzles.
Aligning the Ink Cartridges from the Toolbox Application
Open the Toolbox application from the Olivetti icon present in the task bar or by selecting Start > Programs or All programs > Olivetti > Olivetti Toolbox. The main screen of the Toolbox application is displayed. Select Solutions and Assistance > Print the Alignment Page. Select Print. When the alignment page is printed, the ink cartridges are aligned. Select Close to return to the Toolbox application main screen.
MANAGING INK CARTRIDGES IN FAX MODE
When the black cartridge is almost out of ink, printing in black can be achieved using the colour cartridge (black trichromatic). With this feature, you are able to receive a fax even if the black ink has run out. It is suggested that you replace the black ink cartridge with minimum delay. When you install the new black cartridge, fax printing is automatically reconfigured to print using both the cartridges again (black and colour). To manually set up how cartridges are managed in fax mode, use the Toolbox application from the computer (select Toolbox > Settings > Fax settings).
USING THE PHOTO INK CARTRIDGE

Possible cause

Corrective Action Make sure that the electrical outlet is working by attaching another appliance that you know works into it, then switch on the appliance. Proceed with the corrective action for the corresponding LED that is illuminated.
Some LEDs are illuminated on the printer front panel.
Specific printer error indicated by the LED.
Printing, Copying and Scanning Problems
Problema The print command of the application is not active. Possible cause The printer is not set as the default printer. Corrective Action In Windows environment: Select Start > Settings > Printers and fax. Select with your right mouse button the icon of the printer required and select Set as default. In Macintosh environment: Reinstall the software provided with the printer, and check the printing settings and the spooler of the Mac OS X system. Switch off the printer and computer, then unplug the USB cable from these two devices. Reattach the USB cable, then switch on the printer first followed by the computer. Clear the paper jam. See "Clearing Paper Jams". Select Cancel to remove the error condition. The print job restarts from the next page. Remove the protective tape and reinsert the cartridge. Clean the cartridges. See "Cleaning the ink cartridge Nozzles". Align the cartridges from the computer. See "Aligning the Ink Cartridges from the Toolbox Application". Contact technical support.
The printer is not properly connected to the computer.
The printing stops in the middle of a print job.

The paper is jammed.

The black and/or colour cartridge is completely missing. Horizontal lines are printed.
The protective tape has not been removed from the black and/or colour cartridge. The cartridge is temporarily not working. The cartridges are no longer aligned.
The printed characters are not properly defined.
A completely white or black copy has been printed.
Faulty Contact Image Sensor.

FAX ERROR MESSAGES

The printer display normally indicates the date and time and informs the user on the current fax activities. Messages that appear do not obstruct normal operation of the printer and can be displayed until the next time the fax module is used. To clear the message displayed, press the Cancel ("C") key on the printer keyboard.
Messages During Transmission
Message TX INTERRUPTED TX NOT POSSIBLE Description The user has interrupted the transmission in course by pressing the Cancel key. The scanner is already busy with other operations, for example, from the computer. Wait until the operations in course on the printer complete before scanning the new document to be sent by fax. The memory available on the fax is full because too many documents have been scanned, and it is not possible to store other documents. Send the documents present in memory by fax, or delete them. This is displayed at the end of a failed fax transmission. Try to send another document by fax.

TX MEMORY FULL

TX ERROR
Messages During Reception
Message RX INTERRUPTED RX ERROR MEMORY FULL Description The user has interrupted the reception in course by pressing the Cancel key. This is displayed at the end of a failed fax reception. Try receiving another document by fax. The memory available on the fax is full because many documents have been received. If this type of error occurs, a generic error code appears on the fax report. Print the documents received which are in memory, or delete them if unwanted.

General Messages

Message EMPTY Description No data is present in the fax memory. This is displayed when, for example, you try to print inexistent fax reports, or when you access the phone book but no information is found stored in it. Error setting the date and time. Repeat data entry making sure to enter valid values. Warning displayed during the diagnostics phase at printer start-up. Indicates that the fax module is malfunctioning. When this message appears, switch the printer off and on again. If the problem persists, call technical support. Generic error in printer module. One possible reason may be that the ink is exhausted in one of the cartridges installed, paper is missing in the feeder, a paper jam etc.). For more information, check the LEDs on the printer front panel or, if connected to a computer, use the Status Monitor to search for any error messages.
ILLEGAL SETTING FAX NOT WORKING

PRINTER ERROR

ERROR CODES PRINTED ON THE FAX REPORT
Error codes are automatically printed on the fax transmission and activity reports.
Transmission Report Error Codes
The error codes printed on the fax transmission report consist of 2-digits indicating the reason for the error, and a brief description to help understanding. Code 04 Message OK RECEIVER DOES NOT ANSWER ERR. WHILE TRANSMITTING RESEND FROM PAGE nn LINE BUSY STOP PRESSED ERR. WHILE TRANSMITTING RETRY B/W Description No error. The recipient is not replying to the call or is not a fax. An anomaly has been detected during transmission. "nn" indicates the number of the page where the error occurred. The line is busy. Transmission has been interrupted During fax transmission an error has occurred, or the recipient has interrupted fax reception. You are trying to send a colour document but the recipient is not able to receive it Action Required No action required. The fax has been sent correctly. Make sure that the recipients number is correct. Repeat the transmission starting from the page indicated on the report. Retry when the line is free. No action. Try to resend the fax or make sure that the recipient consents to receiving the fax. Resend the fax selecting black and white mode (B/W).

LEDs

Automatic sheet feeder
Automatic document feeder Memory size Dimensions and weight
Power supply unit Input voltage Output voltage Connectivity
Autoranging external universal power supply unit, model CWT PAA060P. 100 - 240 Vca, 50-60 Hz, 1.7 A max. grounded. 30 Vdc, 2 A. High-speed USB 2.0 on the rear of the printer for connecting a personal computer. PictBridge-compliant USB 1.1 on front panel for connecting a digital camera. Operating: 15 C to 35 C Storage: -5 C to +45 C Transportation: -15 C to +55 C

Temperature ranges

Humidity ranges Operating: 15% to 85%, non-condensing. Storage: 15% to 85%, non-condensing. Transportation: 5% to 95%, non-condensing. Printer and scanner driver (WIN/MAC). Toolbox Application program (WIN/MAC). User documentation (WIN/MAC). Additional software (WIN).
Software and documentation
Minimum requirements for computer connected
Operating system: Microsoft Windows 2000 (Service Pack 3 or later), XP (Service Pack 2 or later), Vista or MAC OS X 10.2, 10.3,OS X 10.4 RAM: 256 MB for Windows 2000/XP (recommended 512 MB). 512 MB for Vista (recommended 1 GB) Free hard disk space: 500 MB.

PRINTER SPECIFICATIONS

Printer Specifications
Printing technology Printing system Bubble ink-jet. With the following ink cartridges: Tri-colour (cyan, magenta, yellow) Black Tri-colour photo. For printing photos, replace the black cartridge with the photo cartridge (sold separately). Up to 4800 dpi optimised.
Print resolution Margins Direct printing mode
Borderless on all types of special ink-jet paper. Available from: Photo Index. PictBridge/DPOF-compatible devices. Compatible devices (USB pen or drive).

COPIER SPECIFICATIONS

Copier Specifications
Resolution Copy mode Max. 1200 x 1200 dpi In stand-alone mode 100%, fit to page. Paper type/speed: plain and photo paper. Contrast adjustment: light, normal, dark. From the Toolbox application: Reduction/enlargement from 25% to 400%, clone mode, poster mode (only if document is placed on scanner glass). Up to 99.

Maximum number of copies

SCANNER SPECIFICATIONS

Scanner Specifications

Type Optical Resolution Max. scan area Compatibility Functionality Flatbed, CIS (Contact Image Sensor). Up to 1200 x 1200 dpi Interpolation: up to 9600 dpi
215 mm (width) x 297 mm (length). Twain and WIA supported. Scan to file Scan to email Scan to application Scan to fax.
FAX SYSTEM SPECIFICATIONS

Fax Specifications

Send fax The fax functions can be accessed from both the keyboard and the computer. Send a colour or B/W fax. Compatibility with the G3-ITU T30 E standard. Speed 33.6 Kb/sec with auto fall back. Coding method for files in formats: MH, MR, MMR and JPG. RX Mode: Automatic, Manual, Answering device/Fax, Phone/Fax. In automatic or manual. Manually from the scanner, with automatic sheet loading using the automatic document feeder. Activity and confirmation reports. Fax CCITT/ITU Group 3 with error correction mode.