FUJIFILM NP-60 Camera Battery
FUJIFILM NP-60 Camera Battery This digital camera battery can replace the following part numbers: CASIO NP-30DBA CREATIVE NP-60 FUJIFILM NP-60 HP A1812A , L1812A , L1812B, PHOTOSMART R07, Q2232-80001 KODAK KLIC-5000 OLYMPUS LI-20B PANASONIC CGA-S301, CGA-S302A ,CGA-S302A/1B, CGA-S302E/1B, VW-VBA10, VW-VBA20, VW-VBA21 PENTAX D-LI2 RICOH DB-40 SAMSUNG SLB-1037, SLB-1137 SONY COMA-BP1 TOSHIBA PDR-BT3 YAESU FNB-82LI This digital camera battery is also compatible with the following models: FUJIFILM Fujifilm FinePix 50i, Fujifilm FinePix 601, Fujifilm FinePix M603, Fujifilm FinePix M603 Zoom FUJIFILM FinePix F Series FinePix F401, FinePix F401 Zoom, FinePix F410, FinePix F410 Zoom, FinePix F601,FinePix F601 Zoom CASIO Casio QV-R3, Casio QV-R4 CREATIVE Creative DiVi CAM 428 HP HP Photosmart R507, HP Photosmart R607, HP Photosmart R607 BMW, HP Photosmart R607 Gwen, HP Photosmart R607xi, HP Photosmart R707, HP Photosmart R707v,
laptop batteries wholesale http://www.shopokey.com Email:sales@shopokey.com Page 1
HP Photosmart R707xi, HP Photosmart R717, HP Photosmart R725, HP Photosmart R727, HP Photosmart R817, HP Photosmart R817v, HP Photosmart R817xi, HP Photosmart R818, HP Photosmart R827, HP Photosmart R837, HP Photosmart R847, HP Photosmart R927, HP Photosmart R937, HP Photosmart R967 KODAK Kodak EasyShareOne Series EasyShare One Zoom Kodak EasyShare LS Series EasyShare LS420, EasyShare LS433, EasyShare LS443, EasyShare LS633, EasyShare LS743, EasyShare LS753 Kodak EasyShare DX Series EasyShare DX6490, EasyShare DX7440, EasyShare DX7590, EasyShare DX7590 Zoom, EasyShare DX7630 Kodak EasyShare P Series EasyShare P712, EasyShare P850, EasyShare P880 Kodak EasyShare Z Series EasyShare Z730, EasyShare Z7590, EasyShare Z760 OLYMPUS Olympus AZ-1, Olympus AZ-2, Olympus AZ-2 Zoom, Olympus Ferrari Digital Model 2004 PANASONIC Panasonic SV-AS3, Panasonic SV-AS3A, Panasonic SV-PT1 Panasonic SV-AV Series SV-AV10, SV-AV10-A, SV-AV10-R, SV-AV10-S, SV-AV10-U, SV-AV20, SV-AV25, SV-AV25EG-S, SV-AV30, SV-AV35, SV-AV100, SV-AV100EG-S PENTAX PENTAX Optio Series Optio 330, Optio 330RS, Optio 430, Optio 430RS RICOH Ricoh Caplio 300G,
laptop batteries wholesale http://www.shopokey.com Email:sales@shopokey.com Page 2
Ricoh Caplio 400G wide, RicohCaplio G3, Ricoh Caplio G4, Ricoh Caplio G4 wide, Ricoh Caplio RR10, Ricoh Caplio RR30 ROLLEI Rollei Prego dp5300 SAMSUNG Samsung DigiMax U-CA3, Samsung DigiMax U-CA4, Samsung DigiMax U-CA5, Samsung DigiMax U-CA401, Samsung DigiMax U-CA501, Samsung DigiMax U-CA505, Samsung DigiMax V10, Samsung DigiMax V700, Samsung DigiMax V800 SONY SonyMy Line Online, Sony Mylo, Sony Mylo COM-1, Sony Mylo COM-1/B, Sony Mylo COM-1/W, Sony Mylo COM-2 TOSHIBA Toshiba Allegretto 5300 Toshiba PDR-T Series PDR-T20, PDR-T30, PDR-5300 YAESU Yaesu VX-2, Yaesu VX-2E, Yaesu VX-2R Please ensure the product(s) that you are going to buy fits the brand, model and part number of your device. 100% new high quality Replacement FUJIFILM NP-60 Compatible Li-ion Battery Ultra High Power, No Memory Effect. Manufactured By High-Capacity power products. 1 year warranty. 30 day money back guarantee for FUJIFILM NP-60 Battery We accept PayPal payment system. Ask for more information on FUJIFILM NP-60 Digital Camera Battery, please Email or Telephone to us! How Can I Maximize Digital Camera Battery Performance? Battery Storage - If you don't plan on using the battery for a month or more, we recommend storing it in a clean, dry, cool place away from heat and metal objects. Ni-Cd, Ni-MH and Li-ion batteries will self-discharge during storage; remember to break them in before use. Sealed Lead Acid (SLA) batteries must be kept at full charge during storage. This is usually achieved by using special trickle chargers. If you do not have a trickle charger, do not attempt to store SLA batteries for more than three months. Keep Your Batteries Clean - It's a good idea to clean dirty battery contacts with a cotton swab and alcohol. This helps maintain a good connection between the battery and your portable
laptop batteries wholesale http://www.shopokey.com Email:sales@shopokey.com Page 3
device. Breaking In New Batteries - new batteries come in a discharged condition and must be fully charged before use. It is recommended that you fully charge and discharge your new battery two to four times to allow it to reach its maximum rated capacity. Exercise Your Battery - Do not leave your battery dormant for long periods of time. We recommend using the battery at least once every two to three weeks. If a battery has not been used for a long period of time, perform the new battery break in procedure described above. Preventing the Memory Effect - Keep your battery healthy by fully charging and then fully discharging it at least once every two to three weeks. Exceptions to the rule are Li-ion batteries which do not suffer from the memory effect.laptop batteries

01 AZ-2BaEN-P1

04.9.16 5:44 PM

Page 1

DIGITAL CAMERA

AZ-2 ZOOM

BASIC MANUAL

ENGLISH 54 80

Page 2

Thank you for purchasing an Olympus digital camera. Before you start to use your new camera, please read these instructions carefully to enjoy optimum performance and a longer service life. This manual explains shooting and playback basics. For details on functions, read the advanced manual. Keep this manual in a safe place for future reference. We recommend that you take test shots to get accustomed to your camera before taking important photographs. The screen and camera illustrations shown in this manual were produced during the development stages and may differ from the actual product.
For customers in North and South America For customers in USA Declaration of Conformity Model Number : AZ-2 ZOOM Trade Name : OLYMPUS Responsible Party : Address : 2 Corporate Center Drive, PO Box 9058, Melville, New York 11747-9058 U.S.A. Telephone Number : 1-631-844-5000 Tested To Comply With FCC Standards FOR HOME OR OFFICE USE This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference. (2) This device must accept any interference received, including interference that may cause undesired operation. For customers in Canada This Class B digital apparatus meets all requirements of the Canadian Interference-Causing Equipment Regulations.
For customers in Europe CE mark indicates that this product complies with the European requirements for safety, health, environment and customer protection. CE mark cameras are intended for sales in Europe. Trademarks
IBM is a registered trademark of International Business Machines Corporation. Microsoft and Windows are registered trademarks of Microsoft Corporation. Macintosh is a trademark of Apple Computer Inc. All other company and product names are registered trademarks and/or trademarks of their respective owners. The standards for camera file systems referred to in this manual are the Design Rule for Camera File System/DCF standards stipulated by the Japan Electronics and Information Technology Industries Association (JEITA).

Page 3

Unpacking the box contents
If any accessories are missing or damaged, contact the dealer from whom you purchased the camera.

Digital camera

Lens cap and cap string

xD-Picture Card

Lithium ion battery (LI-20B)

AC adapter (D-7AC)

USB cable

AV cable

OLYMPUS Master CD-ROM

Basic manual

Advanced manual (CD-ROM)

Warranty card

Registration card Registration card is not provided in some areas.

Camera cleaner

Contents vary depending on the area where you purchased this camera.

Page 4

Attaching the lens cap and strap
To attach the camera cleaner to the camera, thread the cap string through the camera cleaners string loop.
Pull on the strap to make sure it is fastened securely.
Do not pull on the strap too hard when it is attached to the camera as this could break the strap. Attach the strap correctly as shown above so that the camera does not fall off. Olympus is not responsible for any damages incurred when the strap is attached incorrectly and the camera comes off.

Page 5

What you can do with this camera
You can choose from more than 10 different types of scene shooting modes, making it easy to set the appropriate shooting mode for a variety of shooting situations! Once youve selected the shooting mode, just press the shutter button to take the picture. You can take sequential shots, or record movies with sound.

You can create photo albums from the pictures stored on the xD-Picture Card.
Try a slideshow transition effect such as SWIVEL and CHECKERBOARD, etc. to view recorded images.
Stored images are sorted by shooting date. You can select them using the calendar.
2004 Sun Mon Tue Wed Thu 5 6

Fri Sat 7 8

Images can be played back on a TV with the AV cable.
When the camera is connected to a PC or printer. You can transfer the images to your PC.
You can print out stored pictures directly with a PictBridge-compatible printer without using your PC.

Page 6

Contents
This manual explains shooting preparation and easy techniques for shooting and playback. This manual is only for quick reference and should be read first to learn basic camera operation Safety precautions. 7 Loading the battery. 13 Charging the battery. 15 Inserting the card. 16 Power on. 18 Shooting. 19 Playback. 21 Power off. 22 What you can do with OLYMPUS Master software. 23 Information. 24 Specifications Camera. 24 Specifications Provided accessories. 26
For other functions not described here, read the advanced manual.
The advanced manual explains the following:
Shooting methods except auto mode Selecting the situation-related shooting modes Manually adjusting focus, exposure, image and image quality to suit your own tastes. Methods of viewing and editing recorded images Customizing functions for more efficient operation Transferring recorded images to a computer Printing recorded images

Page 7

Safety precautions

CAUTION

RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRICAL SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED OLYMPUS SERVICE PERSONNEL.
Lightning flash with an arrowhead, enclosed in a triangle, alerts you to the presence of uninsulated voltage points inside the product which could cause a serious electrical shock.
An exclamation mark enclosed in a triangle alerts you to important operating and maintenance instructions in the documentation provided with the product.

WARNING!

TO AVOID THE RISK OF FIRE OR ELECTRICAL SHOCK, NEVER EXPOSE THIS PRODUCT TO WATER OR OPERATE IN A HIGH HUMIDITY ENVIRONMENT.

General precautions

Read All Instructions Before you use the product, read all operating instructions. For more information on accessories such as the lithium ion battery, refer to the manuals provided with those products. Save These Instructions Save all safety and operating instructions for future reference. Heed Warnings Read carefully and follow all warning labels on the product and those described in the instructions. Follow Instructions Follow all instructions provided with this product. Cleaning Always unplug this product from the wall outlet before cleaning. Use only a damp cloth for cleaning. Never use any type of liquid or aerosol cleaner, or any type of organic solvent to clean this product. Attachments For your safety, and to avoid damaging the product, use only accessories recommended by Olympus. Water and Moisture Never use this product around water (near a bathtub, kitchen sink, laundry tub, wet basement, swimming pool or in the rain). Location To avoid damage to the product and prevent personal injury, never place this product on an unstable stand, tripod, bracket, table or cart. Mount only on a stable tripod, stand, or bracket. Follow the instructions that describe how to safely mount the product, and use only the mounting devices recommended by the manufacturer. Power Sources Connect this product only to the power source described on the product label. If you are not sure about the type of power supply in your home, consult your local power company. Refer to instruction pages for information on using the product with a battery. Grounding, Polarization If this product is used with a specified AC adapter, the adapter may be equipped with a polarized alternating current line plug (a plug with one blade wider than the other). This safety feature allows the plug to fit into the power outlet only one way. If you cannot insert the plug into the wall outlet, pull it out, reverse it, and then reinsert it. If the plug still fails to fit, contact an electrician and have the receptacle replaced. Protecting the Power Cord The power supply cord should be placed so it will not be walked on. Never put a heavy object on the power cord or wrap it around the leg of a table or chair. Keep the area around the power cord connection points, at the power outlet, and at the product connection, free of all AC adapter or accessory power cords.

Page 8

Lightning If a lightning storm occurs while using a specified AC adapter, remove it from the wall outlet immediately. To avoid damage from unexpected power surges, always unplug the AC adapter from the power outlet and disconnect it from the camera when the camera is not in use. Overloading Never overload wall outlets, extension cords, power strips, or other power connection points with too many plugs. Foreign Objects, Liquid Spillage To avoid personal injury caused by fire or electrical shock from contact with internal high voltage points, never insert a metal object into the product. Avoid using the product where there is a danger of spillage. Heat Never use or store this product near any heat source such as a radiator, heat register, stove, or any type of equipment or appliance that generates heat, including stereo amplifiers. Servicing Refer all servicing to qualified personnel. Attempting to remove the covers or disassemble the product, could expose you to dangerous high voltage points. Damage Requiring Service If you notice any of the conditions described below while using a specified AC adapter, unplug it from the wall outlet and refer servicing to qualified service personnel: a) Liquid has been spilled onto the product or some other object has fallen into the product. b) The product has been exposed to water. c) The product does not operate normally despite following operating instructions. Adjust only the controls described in the operating instructions as improper adjustment of other controls could damage the product and require extensive repair work by a qualified technician. d) The product has been dropped or damaged in any way. e) The product exhibits a distinct change in performance. Replacement Parts When replacement parts are required, make sure that the authorized service center uses only parts with the same characteristics as the originals, as recommended by the manufacturer. Unauthorized substitution of parts could result in fire, electrical shock, or create other hazards. Safety Check Upon completion of servicing or repairs, ask the service technician to perform safety checks to determine that the product is in good working order.

Page 9

DANGER
If the product is used without observing the information given under this symbol, serious injury or death may result.

WARNING

If the product is used without observing the information given under this symbol, injury or death may result.
If the product is used without observing the information given under this symbol, minor personal injury, damage to the equipment, or the loss of valuable data may result.
Handling the camera WARNING Do not use the camera in areas exposed to flammable or explosive gases. Do not use the flash on people (infants, small children, etc.) at close range.
A fire or explosion may result. When you fire the flash, you must be at least 1 m (3 ft) away from the faces of your subjects. Firing the flash too close to the subjects eyes could cause a momentary loss of vision. Keep young children and infants away from the camera. If not, the following dangerous situations may occur: Becoming entangled in the camera strap or power cords, causing strangulation. If this happens, follow the doctors instructions. Accidentally swallowing the battery, cards or other small parts. Accidentally firing the flash into their own eyes or those of another child. Accidentally being injured by the moving parts of the camera. Do not use or store the camera in dusty or humid places. Using or storing the camera in dusty or humid places may result in a fire or electric shock. Do not cover the flash with a hand while firing. Do not cover the flash or touch it after it has just been fired sequentially. It may be hot and cause minor burns. Do not take apart or modify the camera. Never attempt to disassemble the camera. The internal circuits contain high voltage points which could cause serious burns or electrical shock. Do not let water or foreign objects inside the camera. A fire or electric shock may result. If the camera is accidentally dropped in water, or if liquid is spilled into the camera, stop using it, allow it to dry, and then remove the battery. Contact the nearest authorized Olympus service center. Do not touch the camera or AC adapter until charging is finished and the battery has cooled. The camera and AC adapter become hot while charging. If you touch them for too long, you may suffer minor burns.

Page 10

CAUTION Stop using the camera immediately if you notice any unusual odors, noise, or smoke
around it. If you notice any unusual odors, noise, or smoke around the camera during operation, switch it off immediately and disconnect a specified AC adapter (if attached). Allow the camera to sit idle for a few minutes to cool. Take the camera outdoors, away from flammable objects, and carefully remove the battery. Never remove the battery with bare hands. Contact the nearest Olympus service center immediately. Do not use the camera with wet hands. Damage or electric shock may result. Also, do not connect or disconnect the power plug with wet hands. Be careful with the strap when you carry the camera It could easily catch on stray objects and cause serious damage. Do not leave the camera in areas subject to extremely high temperature. Doing so may cause parts to deteriorate and, in some circumstances, cause the camera to catch fire. Use only the AC adapter specified by Olympus. Using a different AC adapter may damage the camera or power source, or result in accidents or fire. Ensure the adapter used is designed for your region or country. For more information, contact the nearest Olympus service center or the store of purchase. Olympus makes no representations or warranties regarding any damages caused by AC adapters not recommended by Olympus. Handle the camera with care to avoid getting a low-temperature burn. When the camera contains metal parts, overheating can result in a low-temperature burn. Pay attention to the following: When used for a long period, the camera will get hot. If you hold on to the camera in this state, a low-temperature burn may be caused. In places subject to extremely cold temperatures, the temperature of the cameras body may be lower than the environmental temperature. If possible, wear gloves when handling the camera in cold temperatures.

Battery handling precautions
Follow these important guidelines to prevent the battery from leaking, overheating, burning, exploding, or causing electrical shocks or burns.
DANGER Never heat or incinerate the battery. Do not connect the (+) and (-) terminals to each other using metal objects. Do not carry or store the battery where it may come into contact with metal objects Never store the battery where it will be exposed to direct sunlight, or subjected to
high temperatures in a hot vehicle, near a heat source, etc. Battery leakage, overheating or explosion, etc. may cause a fire, burns or injury. Never attempt to disassemble the battery or modify it in any way, such as by soldering. Doing so may break the terminals or cause battery fluid to splash, resulting in potential fire, explosion, battery leakage, overheating or other damage. If battery fluid gets in your eyes, loss of eyesight may result. If battery fluid gets in your eyes, do not rub them. Flush them immediately with clear, cold running water and seek medical attention straight away. such as jewelry, pins, fasteners, etc.

Page 11

WARNING Keep the battery dry at all times. Never allow it to come into contact with fresh or Do not touch or hold the battery with wet hands. If the rechargeable battery does not recharge within the specified time, stop
charging it and do not use it. If you do not, fire, explosion, ignition or overheating may result. Do not use the battery if it is cracked or broken. Doing so may cause explosion or overheating. Never subject the battery to strong shocks or continuous vibration. Doing so may cause explosion or overheating. Never attempt to modify the battery compartment on the camera, never insert anything (other than the specified battery) into the compartment. If the battery leaks, becomes discolored or deformed, or appears abnormal in any way during operation, stop using the camera immediately. Contact your dealer or an authorized Olympus service center. Continued use may result in fire or electric shock. If the battery leaks fluid onto your clothing or skin, remove the clothing and flush the affected area with clean, running cold water immediately. If the fluid burns your skin, seek medical attention immediately. salt water.

CAUTION Do not remove the battery from the camera immediately after operating the camera
on battery power for a long time. Doing so may cause burns. Remove the battery from the camera if it is not going to be used for a long time. Otherwise, battery leakage or overheat may cause a fire or injury.
AC adapter handling precautions DANGER Do not put the adapter in water or use it when wet. Do not touch or hold it with wet
hands. Doing so may cause malfunction or electric shock. Do not use the AC adapter if it is covered with cloth such as a blanket. Do not use the charger if something is covering it (such as a blanket). Heat may be kept, causing the AC adapter to deform. This may cause fire, ignition or overheating. Do not disassemble or modify the AC adapter. This may cause electric shock or injury. Use an AC adapter designed to operate on the AC voltage in the area where you are using the camera. Otherwise, fire, explosion, smoke, overheat, electric shock or burns may result.

Page 12

WARNING Do not damage the AC adapters cable.
Do not pull on the AC adapters cable or add another cable to it. Be sure to connect or disconnect the AC adapters cable while holding the power plug. If the following cases occur, stop using and contact an Olympus dealer or customer support center. The power plug or cable produces heat, burning smell, or smoke. The power plug or cable is cracked or broken. The contact is bad on the power plug.
CAUTION Unplug the AC adapters cable from the outlet before cleaning the camera.
Otherwise, electric shock or injury may result.

FCC Notice

Radio and Television Interference Change or modifications not expressly approved by the manufacturer may void the users authority to operate this equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Adjust or relocate the receiving antenna. Increase the distance between the camera and receiver. Connect the equipment to an outlet on a circuit different from that to which the receiver is connected. Consult your dealer or an experienced radio/TV technician for help. Only the OLYMPUS-supplied USB cables should be used to connect the camera to USB-enabled personal computers (PC). Any unauthorized changes or modifications to this equipment would void the user's authority to operate.

Page 13

Loading the battery
The camera uses an Olympus lithium ion battery (LI-20B).
Open the battery/card compartment cover.
Slide the battery/card compartment cover in the direction of the arrow 1. The cover unlocks and opens in the direction of the arrow 2.
Insert the battery until the knob locks it in 3.
The OLYMPUS logo should be facing the monitor side.

Page 14

Removing the battery
Make sure that the power lamp is turned off. Slide the knob in the direction of the arrow 4. With the battery held down, tilt the camera carefully so that the battery does not drop from the camera. Remove the battery 5. Power lamp
Close the battery/ card compartment cover. Close the battery/card compartment cover. Lift up the cover 6 and push down firmly on the section of the cover 7 to close. Closing the battery/card compartment cover locks the latch.

Page 15

Charging the battery
Charging is performed with the battery loaded in the camera. The battery is not fully charged when purchased. Before use, be sure to charge the battery with the provided AC adapter. To the AC wall outlet DC-IN jack AC adapter (provided)

AC plug

During charging, the power lamp blinks slowly. Battery charging takes about 2 hours. Power lamp
How to use the stand You can put the camera on the stand while the camera is connected to the AC adapter.
Using the AC adapter overseas When you use the AC adapter overseas, a multiplug is required to allow the plug to fit into local power outlets. For details on multiplugs, consult a travel agency.
Before charging the battery, be sure to read Safety precautions (~P. 7). If an error occurs during battery charging, the self-timer/remote control lamp blinks. If this happens, remove the battery, then insert it again, or disconnect and connect power plug.

Page 16

Inserting the card
Card in this manual refers to the xD-Picture Card. The camera uses the card to record pictures.
Index area Write the cards contents here. Contact area The area that touches the cameras electric contact points. The camera reads the card here.
Compatible xD-Picture Card: 16 - 512 MB

Power lamp

Make sure that the power lamp is turned off.
Make sure that the card is oriented as shown in the illustration and insert the card while keeping it straight.
When the card is inserted all the
way, it stops with a click. Inserting the card the wrong way could damage the contact area or cause the card to jam.

Page 17

Removing the card
Push the card all the way in to unlock it, then let it return slowly. The card may eject forcefully if you take your finger off it immediately after pushing it or if you flick it with your fingers. Hold the card straight and pull it out slowly.

Close the battery/ card compartment cover.

Page 18

Power on
Lens cap Remove this when taking pictures.
POWER switch Turns the camera on.
When the camera is turned on, the power lamp next to the POWER switch lights steadily.
Mode switch Set the mode switch to.
: Select this for movie shooting. : Select this for playback.

Battery check

BATTERY EMPTY is displayed. Lights (green) Remaining power level: High* Lights (red) Remaining power level: Low.Charge the battery. Remaining power level: Exhausted. Charge the battery.

HQ 2288 1712

Monitor * Your digital camera's power consumption varies greatly When the camera is turned depending on usage and operating conditions. Under some on, the monitor turns on. operating conditions, the camera may turn off without warning If the camera is being that battery power is low. If this occurs, re-charge the battery. operated for the first time, Y/M/D is displayed. Although you can operate the camera without setting the date/time, correct shooting dates may not be displayed on the calendar. ~ Advanced manual

Page 19

Shooting
Place the AF target mark on the subject while viewing the monitor to compose your shot.
Shooting mode AF target mark Shutter button
Record mode Number of storable still pictures
Hold the camera firmly with both hands while keeping your elbows at your sides to prevent camera movement. While shooting vertically using the flash, hold the camera so that the flash is higher than the lens. Correct
Adjust the focus. Press the shutter button gently (halfway).

Incorrect

Green lamp Flash stand-by/Flash charging mark
Keep your fingers and the strap away from the lens and flash.
When the focus and exposure are locked, the green lamp lights steadily. The (flash stand-by) mark lights when the flash fires.

Page 20

Release the shutter. Press the shutter button all the way (fully).
Press the shutter button gently. If it is pressed hard, the camera may move and pictures may come out blurred.

Card access mark

When a picture is taken, a shutter sound is output. The (card access) mark blinks and the camera starts recording the picture. The camera automatically turns off if it is not operated for about 3 minutes. Press the POWER switch to turn on the camera.
Never remove the battery, card or AC adapter while the mark is blinking. Doing so could destroy stored pictures and prevent storage of pictures you have just taken. When taking pictures against strong backlight, the area of the picture in shadow may appear colored. When you point the lens toward a bright object, vertical lines (smears) may appear on the monitor. However, this does not affect the actual recorded pictures.

Page 21

Playback

Display recorded images.

Press Shutter button
The last recorded image appears.
The shooting information displayed on the screen disappears after 3 seconds.
QUICK VIEW button Joystick If the camera is not operated for more than 3 minutes, the monitor turns off, then the camera turns off.

1000015

04.12.24 00:00
Use the Joystick to play back images you want to view.
Push the Joystick left to display the previous image. Push the Joystick up to jump to the image 10 frames back.
Push the Joystick down to jump to the image 10 frames ahead.
Push the Joystick right to display the next image.
To return to the shooting mode, press the shutter button halfway.
When the AC adapter is used, the monitor does not turn off.

Page 22

Power off
Attach the lens cap to the lens. Turn off the camera. Press
The power lamp turns off.
Monitor When the camera is turned off, the monitor turns off.

Page 23

What you can do with OLYMPUS Master software
The provided software CD includes OLYMPUS Master software for viewing and editing images. Once installed, you can take advantage of viewing and editing your images as shown below. For information on how to use OLYMPUS Master software, see Help after installation.
Creating panorama images You can make a panorama from the photos you have taken using the panorama function.
Editing images You can rotate, trim, or compensate for the image distortion.
Grouping and organizing images You can arrange images by grouping or by creating photo albums. A variety of printing formats You can create a calendar or postcard with the recorded pictures.

We d Thu

Transferring images from a computer to the camera Images and movies selected with OLYMPUS Master software can be transferred to the camera.
Transferring images from the camera or removable media to your computer
Transferring images from the camera to your computer Albums created on the camera can be transferred to your computer and played back with OLYMPUS Master*.

* Install OLYMPUS Master on your computer from the provided CD-ROM. OLYMPUS Master allows you to register as the cameras owner. Doing so will enable you to receive information on software or firmware upgrades from Olympus.

Page 24

Information

Specifications Camera

Product type Recording system Still picture Applicable : Digital camera (for shooting and displaying) : Digital recording, JPEG (in accordance with Design rule for Camera File system (DCF)) : Exif 2.2, Digital Print Order Format (DPOF), PRINT Image Matching II, PictBridge standards : Wave format
Sound with still pictures Movie : QuickTime Motion JPEG support Memory : xD-Picture Card, 16 MB to 512 MB No. of storable pictures (When using a 16 MB card) : Still picture record mode (The numbers in the table are approximate.)

Record mode SHQ

Resolution 2288 x 1712 3:x x 1712 3:x 1520 HIGH 2048 x 1536 NORMAL HIGH NORMAL HIGH NORMAL 1024 x 768 HIGH NORMAL HIGH 640 x 480 NORMAL
Compression Low compression High compression
Number of storable pictures File format With sound Without sound JPEG 66 165

1600 x 1200

1280 x 960

58 124

*HIGH uses low compression/NORMAL uses high compression.

Movie record mode

Record mode SHQ HQ SQ1 SQ2 Resolution 640 x 480 (30 frames/sec.) 640 x 480 (15 frames/sec.) 320 x 240 (30 frames/sec.) 320 x 240 (15 frames/sec.) Motion-JPEG File format Remaining recording time (sec.) With sound 8* 67 Without sound 8* 70
*Maximum recording time: Limited regardless of the card's memory.

Page 25

No. of effective pixels Image pickup device Lens Photometric system Shutter speed
Shooting range Monitor Operating environment Temperature : 0 to 40C (32 to 104F) (operation) 20 to 60C ( 4 to 140F) (storage) Humidity : 30% to 90% (operation) 10% to 90% (storage) Power supply : Only an Olympus LI-20B lithium-ion battery AC adapter specified by Olympus Dimensions : 104.5 mm (W) x 63 mm (H) x 20 mm (D) (4.1" x 2.5" x 0.8") (excluding protrusions) Weight : Approx. 135 g (0.3 lb) (without battery and card)
: 4,000,000 pixels : 1/2.7" CCD solid-state image pickup 4,230,000 (gross) : Olympus lens 6.2 mm to 17.3 mm, f2.9 to f4.8, (equivalent to 40 mm to 112 mm lens on 35 mm camera) : Digital ESP metering, Spot metering system : 1/2 to 1/1000 seconds (the slowest shutter speed is 4 sec. in the mode) : Normal: 50 cm (1.6 ft.) to , Macro mode: 30 cm (1.0 ft.) to : 2.5" TFT color LCD display, Approx. 206,000 pixels

Page 26

Specifications Provided accessories
xD-Picture Card Product type Memory type Memory capacity Operating environment xD-Picture Card for digital camera NAND Flash EEP-ROM Shown on the card Temperature 0 - 55C (32 - 131F) (operation) 20 - 65C (4 - 149F) (storage) Humidity 95% or less : 3V (3.3V) : Approx. 20mm (L) x 25mm (W) x 1.7mm (H) (0.8" x 1.0" x 0.1") : : : :

Drive voltage Dimensions

LI-20B Lithium ion battery
Type Standard voltage Standard capacity Battery life Recommended temperature Dimensions Weight AC adapter Input voltage Output voltage Operating environment Storage environment Dimensions Weight
Lithium ion battery DC 3.7V 1035 mAh Approx. 300 full recharges (battery life varies depending on the operating environment.) : 10C 40C/50F 104F (charging) -10C 60C/14F 140F (operation) -20C 35C/-4F 95F (storage) : 35 x 53 x 7 mm/1.4 x 2.1 x 0.3 in : Approx. 28 g/1 oz.

: : : :

: : : : : :
AC100 - 240V, 50/60Hz, 23 - 32VA, 13W DC4.8V, 2.0A 0 - 40C (32 - 104F) 10 - 70C (14 - 284F) 47mm (W) x 72mm (H) x 27mm (D) (1.9" x 2.8" x 1.1") Approx. 160 g (0.4 lb) (excluding the power cable)
SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT ANY NOTICE OR OBLIGATION ON THE PART OF THE MANUFACTURER.

Page 27

http://www.olympus.com/
Shinjuku Monolith, 3-1 Nishi-Shinjuku 2-chome, Shinjuku-ku, Tokyo, Japan
http://www.olympus.com.cn 1 W2 010-8518-021-6426-100738
010-8518-0009 021-6426-020-6122-7111
200030 1605-1608 010-6122-7120 510095

00852-2730-1505

00852-2730-7976
9F, Hyundai Marines BD, 646-1, Yeoksam-Dong, Kangnam-Gu, Seoul, Korea http://www.olympus.co kr Tel. 1544-3200
Two Corporate Center Drive, PO Box 9058, Melville, NY 11747-9058, U.S.A. Tel. 1-631-844-5000 Technical Support (USA) 24/7 online automated help: http://www.olympusamerica.com/support Olympus software updates can be obtained at: http://www.olympus.com/digital
Wendenstrasse 14-18, 20097 Hamburg, Germany Tel. +- 3-0 / Fax +- 61 Please visit our homepage http://www.olympus-europa.com 2004
Printed in Japan 1AG6P1P2354 VM043101