2006.2006 10.07 --:--

f. Press the Y# button. g. Press the O< and NY buttons to select the hours and minutes.

2006.12:10.30

SET OK
h. Press the Y# button. i. Press the O< and NY buttons to select [Y/M/D].
j. After all settings have been set, press Q.
The time is displayed in the 24-hour format. For a more accurate setting, press Q when the time signal hits 00 seconds.

Q button

[ IN ]

HQ 28162112

Take a picture

a. Hold the camera.

Horizontal grip Vertical grip

b. Focus.

Place this mark over your subject.
Shutter Button (Press Halfway)
The number of pictures that can be taken is displayed. The green lamp indicates the focus and exposure are locked.

c. Shoot.

The card access lamp blinks. Shutter Button (Press Completely)

Review your pictures

a. Press the q button.

q button

[IN IN]
Arrow pad Displays the next image Displays the previous image
'06.10.07 12:30 100-0004 4
Erase pictures a. Press the X& and Y# buttons to display the picture you want to erase. b. Press the S button.

YES NO

S button
c. Press the O< button, select [YES], and press Q.

O< button

Contents

Button operations...14

Test out the functions of the camera buttons by following the illustrations and actually trying them out on the camera.
o button. Turning the camera on and off Shutter button..Shooting pictures/movies K button (Shooting)..Selecting shooting mode/ Turning the camera on q button (Playback).. Selecting playback mode/ Turning the camera on Mode dial.. Switching shooting modes h.. Shooting pictures with automatic settings h..Shooting pictures using digital image stabilization B E M. Shooting pictures according to the situation f..Shooting pictures by selecting a scene mode according to the situation n... Recording movies R.. Follow the shooting guide for setting Arrow pad (ONXY)... Q button... O< button... Printing pictures X& button.. Shooting pictures close to the subject NY button... Self-timer shooting Y# button..Flash shooting m button.. Displaying the top menu S button.. Erasing pictures Zoom button..Zooming while shooting/Close-up playback 17 18

Menu operations..19

Learn everything about the menus, from basic operations to the functions of each menu and their various settings.
About the menus.... Operation guide.... Using the menus... Shooting mode menu K... IMAGE QUALITY. Changing the image quality PANORAMA...Creating a panoramic picture RESET.Changing the shooting functions back to default settings EXPOSURE COMP.. Changing picture brightness SILENT MODE...Muting operational sounds 23

Follow the shooting guide displayed on the screen to set the target items. Press m to display the shooting guide again. To change the setting without using the shooting guide, set the shooting mode to another one. The content set using the shooting guide will change to the default setting by pressing m or changing the mode using the mode dial.

6 Arrow pad (ONXY)

Use the arrow pad to select scenes, playback picture, and the items on the menus.

7 Q button

This button is used to confirm your selection.

8 O< button

Display a picture to print out in playback mode, connect the camera to the printer, and then press O< to print the picture. g EASY PRINT (P. 30)

9 X& button

Shooting pictures close to the subject
Press X& in shooting mode to select the macro mode. Press Q for setting.
OFF MACRO OFF & MACRO ON Cancels macro mode. This mode lets you shoot from as close as 10 cm/ 3.9 in. (when the zoom is set for the zoom-out angle) and as close as 60 cm/23.6 in. (when the zoom is set for the zoom-in angle) to your subject. This mode lets you shoot from as close as 5 cm/2.0 in. to your subject. The zoom position is fixed automatically and cannot be changed. Self-timer shooting

SUPER MACRO

0 NY button
Press NY in shooting mode to select on or off for the self-timer. Press Q for setting.
OFF Y SELFTIMER OFF SELFTIMER ON Cancel the self-timer. After the setting, press the shutter button completely.
The self-timer lamp lights for approximately 10 seconds, blinks for approximately 2 seconds, and then the picture is taken. To cancel the self-timer, press NY. Self-timer shooting is automatically canceled after one shot.

a Y# button

Press Y# in shooting mode to select the flash mode. Press Q for setting.
AUTO FLASH AUTO ! # $ REDEYE FILL IN FLASH OFF

Flash shooting

The flash fires automatically in low light or backlight conditions. This emits pre-flashes for red-eye reduction. The flash fires regardless of the available light. The flash does not fire even in low light conditions. Displaying the top menu

SEL. IMAGE..Erasing by selecting the single-frame

SEL. IMAGE

Use the arrow pad to select the picture, and press Q to put R. To cancel the selection, press Q again. When the selection is completed, press S. Select [YES], and press Q.
ALL ERASE.Erasing all the pictures in the internal memory or the card
Select [YES], and press Q.

7 PRINT ORDER

Making print reservations (DPOF)
This function allows you to save printing data (the number of prints and the date and time information) with the pictures stored on the card. g Print settings (DPOF) (P. 35)

SETUP menus

Shooting mode
SETUP MEMORY FORMAT (FORMAT*) BACKUP* W PIXEL MAPPING K/q s BEEP 8 SHUTTER SOUND VOLUME R X VIDEO OUT

Playback mode

ROTATE PROTECT RESIZE SLIDESHOW ERASE EXIT
Some functions are not available according to the selected mode. g Functions available in shooting modes and scenes (P. 58)
MEMORY FORMAT (FORMAT).. Formatting the internal memory or card
All existing data, including protected pictures, are erased when the internal memory or card is formatted. Make sure that you save or transfer important data to a computer before formatting. Make sure there is no card inserted in the camera when formatting the internal memory. Be sure that the card is inserted in the camera when formatting the card. Before using non-Olympus cards or cards which have been formatted on a computer, you must format them with this camera.
BACKUP.. Copying pictures in the internal memory to the card
Insert the optional card into the camera. Copying data does not erase the picture in the internal memory. It takes some time to back up data. Check if the battery is not empty before starting the copy.
W... Selecting a display language
You can select a language for on-screen display. Available languages vary depending on the area where you purchased this camera. You can add other languages to your camera with the provided OLYMPUS Master software.
PIXEL MAPPING..Adjusting the image processing function
The pixel mapping feature allows the camera to check and adjust the CCD and image processing functions. It is not necessary to operate this function frequently. Approximately once a year is recommended. Wait at least one minute after taking or viewing pictures to allow the pixel mapping function to perform properly. If you turn the camera off during pixel mapping, start again. Select [PIXEL MAPPING]. When [START] is displayed, press Q.

Settings on the camera Turn the camera on and press q to select the playback mode. The last picture taken is displayed on the TV. Use the arrow pad to select the picture you want to display.
Settings on the TV Turn the TV on, and set it to video input mode. For details of switching to video input, refer to your TVs instruction manual.
Direct printing (PictBridge)
Using the direct printing function
By connecting the camera to a PictBridge-compatible printer, you can print out pictures directly. Select the pictures you want to print and the number of prints on the cameras monitor. To find out if your printer is compatible with PictBridge, refer to the printers instruction manual.
What is PictBridge? A standard for connecting digital cameras and printers of different makers and printing out pictures directly.
Available printing modes, paper sizes etc., vary depending on the printer you use. Refer to the instruction manual for your printer. For details of printing paper types, ink cassettes, etc., refer to the printers instruction manual.

EASY PRINT

[EASY PRINT] can be used to print out the picture displayed on the monitor. The selected picture is printed using the standard settings of your printer. The date and file name are not printed.
STANDARD All printers that support PictBridge have standard print settings. If [STANDARD] is selected on the settings screens (P. 33), pictures are printed according to these settings. Refer to the printers instruction manual for its standard settings or contact the printer manufacturer.
Display the picture you want to print out on the monitor in the playback mode.
Turn the printer on and plug the USB cable provided with the camera into the multi-connector of the camera and the printers USB port.

Multi-connector

USB cable
The [EASY PRINT START] screen is displayed. For details of how to turn the printer on and the position of the USB port, refer to the printers instruction manual.

Press O<.

Printing starts.
EASY PRINT START PC / CUSTOM PRINT OK
When printing is finished, the picture selection screen is displayed. To print another picture, press XY to select a picture, and press O<. When you are finished, disconnect the USB cable from the camera with the picture selection screen displayed.
Remove the USB cable from the camera.
Remove the USB cable from the printer.
You can use [EASY PRINT] even when the camera is turned off or in shooting mode. With the camera turned off or in shooting mode, connect the USB cable. The selection screen for the USB connection is displayed. Select [EASY PRINT]. g EASY PRINT Step 3 (P. 31), Other print modes and print settings Step 2 (P. 32)

Press XY to select the frames for print reservations, and then press ON to set the number of prints.
You cannot make print reservations for pictures with A. Repeat Step 3 to make print reservations for other pictures.

[xD xD]

'06.11.26 12:30 100-SET OK
When you finish making print reservations, press Q. Select the date and time setting, and press Q.
NO DATE TIME The pictures are printed without the date and time. The selected pictures are printed with the shooting date. The selected pictures are printed with the shooting time.

NO DATE TIME BACK

Select [SET], and press Q.

PRINT ORDER 1( 1)

SET CANCEL BACK

All-frame reservation

Reserves all the pictures stored on the card. The number of prints is set at one print per picture.
Press m in the playback mode and display the top menu. Select [PRINT ORDER]

NO DATE TIME

[U], and press Q.
Select the date and time setting, and press Q.
The pictures are printed without the date and time. All pictures are printed with the shooting date. All pictures are printed with the shooting time.
Resetting print reservation data
You can reset all the print reservation data or just for selected pictures.

Select top menu

[PRINT ORDER], and press Q.
To reset the print reservation data for all the pictures
Select [<] or [U], and press Q. Select [RESET], and press Q.
PRINT ORDER SETTING PRINT ORDERED RESET KEEP BACK
To reset the print reservation data for a selected picture
Select [<], and press Q. Select [KEEP], and press Q. Press XY to select the picture with the print reservations you want to cancel, and press N to decrease the number of prints to 0.
Repeat Step 4 to cancel print reservations for other pictures.
When you are finished canceling print reservations, press Q. Select the date and time setting, and press Q.
The setting is applied to the remaining pictures with print reservations.

Using OLYMPUS Master

Using the USB cable provided with your camera, you can connect the camera and computer and download (transfer) the images to your computer using the OLYMPUS Master software, also provided with the camera.
Prepare the following items before starting.
Install the OLYMPUS Master software gP. 39 Connect the camera to the computer gP. 42 using the USB cable
Start up the OLYMPUS Master software gP. 43 Download image files to the computer gP. 44 Disconnect the camera from the computer gP. 44
Computer equipped with a USB port

What is OLYMPUS Master?

OLYMPUS Master is application software for editing images taken with a digital camera on a computer. Installing it on your computer lets you do the following:
( Download images from the camera or other media

Multi-connector Connector cover
Select [PC], and press Q. The camera is recognized by the computer.

USB PC EASY PRINT

CUSTOM PRINT Windows EXIT When you connect the camera to your computer for SET OK the first time, the computer attempts to recognize the camera. Click OK to exit the message that is displayed. The camera is recognized as a Removable Disk. Macintosh The iPhoto program is the default application for managing digital images. When you connect your digital camera for the first time, the iPhoto application starts automatically, so close this application and start OLYMPUS Master.
The camera functions are disabled while the camera is connected to a computer. Connecting the camera to a computer via a USB hub may cause unstable operation. In this case, do not use a hub, but connect the camera directly to the computer.
Start up the OLYMPUS Master software
Double-click the OLYMPUS Master icon

on the desktop.

The main menu is displayed. When OLYMPUS Master is started up for the first time after installation, the Registration dialog box is displayed before the main menu. Follow the prompts and fill in the registration form.
Double-click the OLYMPUS Master icon Master folder.

in the OLYMPUS

The main menu is displayed. When OLYMPUS Master is started up for the first time, the User Information dialog box is displayed before the main menu. Enter your Name and OLYMPUS Master Serial Number, and select your region. Refer to the sticker on the CD-ROM package for the serial number. After the User Information dialog box, the Registration dialog box is displayed. Follow the prompts and fill in the registration form.

OLYMPUS Master main menu

1 Transfer Images button Downloads images from the camera or other media. 2 Browse Images button The Browse window is displayed. 3 Online Print button The online print window is displayed. 4 Print Images at Home button The print menu is displayed. 5 Update Camera button You can upgrade the camera firmware to the latest version and add display languages.
6 Create and Share button Displays the editing menu. 7 Update Software button You can update the OLYMPUS Master software to the latest version. 8 Backup Images button Creates backup images. 9 Upgrade button Displays window for optional upgrade to OLYMPUS Master Plus.

To exit OLYMPUS Master

Click Exit

on the main menu.

OLYMPUS Master is exited.
Displaying camera images on a computer
Downloading and saving images
Click Transfer Images menu. Click From Camera.
on the OLYMPUS Master main
The menu for selecting the source is displayed. The window for selecting images is displayed. All the images in the camera are displayed.
Select the image files and click Transfer Images.

Select the thumbnail image that you want to print and click Add.
A preview of the selected image is displayed on the layout.
Select the number of copies.

Click Print.

Printing starts. To return to the main menu, click Menu in the Photo Print window.
To download and save images to a computer without using OLYMPUS Master
This camera is compatible with USB mass storage. You can connect the camera to your computer using the USB cable provided with the camera to download and save images without using OLYMPUS Master. The following environment is required to use the USB cable to connect the camera to your computer. Windows: Windows 98SE/Me/2000 Professional/XP Macintosh: Mac OS 9.0 to 9.2/X Note
If your computer is running Windows 98SE, you will need to install the USB driver. Before connecting the camera to your computer with the USB cable, double-click the files from the following folders on the provided OLYMPUS Master CD-ROM. (Drive name): \USB\INSTALL.EXE Data transfer is not guaranteed in the following environments, even if your computer is equipped with a USB port. Windows 95/98/NT 4.0 Windows 98SE upgrades from Windows 95/98 Mac OS 8.6 or earlier Computers with a USB port added by means of an extension card, etc. Computers without a factory-installed OS and home-built computers
To increase the number of languages
Be sure that your battery is fully charged!
Make sure that your PC is connected to the Internet. Click Update Camera on the OLYMPUS Master main menu.
After selecting the Update Camera function OLYMPUS Master shows a Window with security advices.
Plug the USB cable into the USB port on the computer. Plug the other end of the USB cable into the cameras multiconnector.
The camera turns on automatically. The monitor turns on and the selection screen for the USB connection is displayed.
Select [PC], and press Q. Click OK.
OLYMPUS Master will identify the current version of your cameras firmware. Click Check for latest version, and the software will search for new firmware versions as well as additional languages.
Select the firmware version and/ or language and click the Update button. Please do not remove any cable or the battery while the camera is processing. After the download procedure, the camera monitor will display [OK]. You can remove the cables and turn the power off. After restarting the camera, you will be able to select the new language from [SETUP].
Getting to know your camera better
Shooting tips and information
Tips before you start taking pictures The camera does not turn on even when a battery is loaded

When taking pictures with the above scene modes, noise reduction can be automatically turned on for clearer pictures of dark subjects. If noise reduction does not turn on, the picture may appear grainy.
Taking pictures of a white beach or snow scene
Often, bright subjects (such as snow) turn out darker than their natural colors. Adjust [EXPOSURE COMP.] toward [+] to make these subjects closer to their real shades. Conversely, when you are shooting dark subjects, it can be effective to adjust toward []. Sometimes, using the flash may not produce the brightness (exposure) that was intended. g EXPOSURE COMP. Changing picture brightness (P. 23)
Taking pictures of a subject against backlight
Set the flash to [#] to activate fill-in-flash. You can shoot a subject against backlight without the face of the subject appearing dark. [#] is effective for shooting against backlight and under fluorescent and other artificial lighting. g Y# button Flash shooting (P. 17)
Additional shooting tips and information Increasing the number of pictures that can be taken
There are two ways to record the pictures you take with this camera. Recording pictures to the internal memory
Pictures are recorded to the internal memory, and when the number of storable still pictures reaches 0, you connect the camera to a computer to download the pictures, and then erase the pictures from the internal memory.

Using a card (optional)

Pictures are recorded to the card when inserted in the camera. When the card is full, you download the pictures to a computer, and then either erase the pictures from the card or use a new card. Pictures are not recorded to the internal memory when a card is inserted in the camera. Pictures in the internal memory can be copied to the card using the [BACKUP] function. g BACKUP Copying pictures in the internal memory to the card (P. 27) The card (P. 62)
Number of storable still pictures and recording length of movies Still pictures
Image quality SHQ HQ SQ1 SQ2 Image size Number of storable still pictures Internal memory Using a 128 MB card 162 725

Movies

Remaining recording time Image quality Image size Internal memory With sound 33 sec. 4 min. 24 sec. Without sound 34 sec. 4 min. 59 sec. Using a 128 MB card With sound 3 min. 10 sec. 25 min. 01 sec. Without sound 3 min. 13 sec. 28 min. 21 sec.
(30 frames/sec.) (15 frames/sec.)

Using a new card

If you use a non-Olympus card or a card used for another application, such as for a computer, the message [CARD ERROR] is displayed. To use this card with this camera, use the [FORMAT] function to format the card. g MEMORY FORMAT (FORMAT) Formatting the internal memory or card (P. 27)

Playback tips Playing back pictures in the internal memory
When a card has been inserted in the camera, the pictures in the internal memory cannot be played back. Pull out the card before operating the camera.
Quickly displaying a desired picture
Press W on the zoom button to view pictures as thumbnails (index display). g Zoom button Zooming while shooting/Close-up playback (P. 18)
Viewing pictures on a computer Viewing the entire picture on a computer screen
The size of the picture displayed on a computer screen changes depending on the computer settings. When the monitor setting is 1,and you are using Internet Explorer to view a picture with an image size of 2,048 1,536 at 100%, the entire picture cannot be viewed without scrolling. There are several ways you can view the entire picture on the computer screen. View the picture using image browsing software
Install the OLYMPUS Master software from the provided CD-ROM.
Change the monitor setting
The icons on the computer desktop may be rearranged. For details of changing the settings on your computer, refer to the computers instruction manual.
When you get an error message on the camera.

Monitor indication

CARD ERROR
Possible cause There is a problem with the card. Writing to the card is prohibited.
Corrective action This card cannot be used. Insert a new card. The recorded image has been protected (read-only) on a computer. Download the image to a computer and cancel the read-only setting. Insert a card or erase unwanted data. Before erasing, backup the data of important pictures using the card, or download such pictures to a computer. Replace the card or erase unwanted data. Before erasing, download important pictures to a computer. The internal memory or the card contains no pictures. Record pictures. Use image processing software to view the picture on a computer. If that cannot be done, the image file is damaged. Use image processing software to edit the pictures.

WRITEPROTECT

MEMORY FULL
The internal memory has no available memory and cannot store any new data. The card has no available memory and cannot store any new data. There are no pictures in the internal memory or on the card. There is a problem with the selected picture and it cannot be played back on this camera. If pictures taken by other cameras are selected, they cannot be edited. The battery/card compartment cover is open. The battery is empty.

CARD FULL

NO PICTURE

PICTURE ERROR

THE IMAGE CANNOT BE EDITED
Close the battery/card compartment cover.

Legal and Other Notices

Olympus makes no representations or warranties regarding any damages, or benefit expected by using this unit lawfully, or any request from a third person, which are caused by the inappropriate use of this product. Olympus makes no representations or warranties regarding any damages or any benefit expected by using this unit lawfully which are caused by erasing picture data.

Disclaimer of Warranty

Olympus makes no representations or warranties, either expressed or implied, by or concerning any content of these written materials or software, and in no event shall be liable for any implied warranty of merchantability or fitness for any particular purpose or for any consequential, incidental or indirect damages (including but not limited to damages for loss of business profits, business interruption and loss of business information) arising from the use or inability to use these written materials or software or equipment. Some countries do not allow the exclusion or limitation of liability for consequential or incidental damages, so the above limitations may not apply to you. Olympus reserves all rights to this manual.

Warning

Unauthorized photographing or use of copyrighted material may violate applicable copyright laws. Olympus assumes no responsibility for unauthorized photographing, use or other acts that infringe upon the rights of copyright owners.

Copyright Notice

All rights reserved. No part of these written materials or this software may be reproduced or used in any form or by any means, electronic or mechanical, including photocopying and recording or the use of any type of information storage and retrieval system, without the prior written permission of Olympus. No liability is assumed with respect to the use of the information contained in these written materials or software, or for damages resulting from the use of the information contained therein. Olympus reserves the right to alter the features and contents of this publication or software without obligation or advance notice. EN 69

FCC Notice

Radio and Television Interference Changes or modifications not expressly approved by the manufacturer may void the users authority to operate this equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: - Adjust or relocate the receiving antenna. - Increase the distance between the camera and receiver. - Connect the equipment to an outlet on a circuit different from that to which the receiver is connected. - Consult your dealer or an experienced radio/TV technician for help. Only the OLYMPUS-supplied USB cable should be used to connect the camera to USB enabled personal computers (PC). Any unauthorized changes or modifications to this equipment would void the users authority to operate.

For customers in North and South America

For customers in USA

Declaration of Conformity Model Number : FE-190/X-750 Trade Name : OLYMPUS Responsible Party : Address : 3500 Corporate Parkway, P.O. Box 610, Center Valley, PA 18034-0610, U.S.A. Telephone Number: 484-896-5000 Tested To Comply With FCC Standards FOR HOME OR OFFICE USE This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: (1)This device may not cause harmful interference. (2)This device must accept any interference received, including interference that may cause undesired operation.

For customers in Canada

This Class B digital apparatus meets all requirements of the Canadian InterferenceCausing Equipment Regulations.

For customers in Europe

CE mark indicates that this product complies with the European requirements for safety, health, environment and customer protection. CE mark cameras are intended for sales in Europe. This symbol [crossed-out wheeled bin WEEE Annex IV] indicates separate collection of waste electrical and electronic equipment in the EU countries. Please do not throw the equipment into the domestic refuse. Please use the return and collection systems available in your country for the disposal of this product.
Use Only Dedicated Rechargeable Battery and Battery Charger
We strongly recommend that you use only the genuine Olympus dedicated rechargeable battery and battery charger with this camera. Using a non-genuine rechargeable battery and/or battery charger may result in fire or personal injury due to leakage, heating, ignition or damage to the battery. Olympus does not assume any liability for accidents or damage that may result from the use of a battery and/or battery charger that are not genuine Olympus accessories.

Provisions of warranty

1. If this product proves to be defective, although it has been used properly (in accordance with the written Handling Care and Operating instructions supplied with it), during a period of two years from the date of purchase from an authorized Olympus distributor within the business area of Olympus Imaging Europa GmbH as stipulated on the website: http://www.olympus.com this product will be repaired, or at Olympuss option replaced, free of charge. To claim under this warranty the customer must take the product and this Warranty Certificate before the end of the two year warranty period to the dealer where the product was purchased or any other Olympus service station within the business area of Olympus Imaging Europa GmbH as stipulated on the website: http://www.olympus.com. During the one year period of the World Wide Warranty the customer may turn the product in at any Olympus service station. Please notice that not in all countries such Olympus service station exists. 2. The customer shall transport the product to the dealer or Olympus authorized service station at his own risk and shall be responsible for any costs incurred in transporting the product. 3. This warranty does not cover the following and the customer will be required to pay repair charge, even for defects occurring within the warranty period referred to above. (a) Any defect that occurs due to mishandling (such as an operation performed that is not mentioned in the Handling Care or other sections of the instructions, etc.) (b) Any defect that occurs due to repair, modification, cleaning, etc. performed by anyone other than Olympus or an Olympus authorized service station. (c) Any defect or damage that occurs due to transport, a falI, shock, etc. after purchase of the product. (d) Any defect or damage that occurs due to fire, earthquake, flood damage, thunderbolt, other natural disasters, environmental pollution and irregular voltage sources.

(e) Any defect that occurs due to careless or improper storage (such as keeping the product under conditions of high temperature and humidity, near insect repellents such as naphthalene or harmful drugs, etc.), improper maintenance, etc. (f) Any defect that occurs due to exhausted batteries, etc. (g) Any defect that occurs due to sand, mud, etc. entering the inside of the product casing. (h) When this Warranty Certificate is not returned with the product. (i) When any alterations whatsoever are made to the Warranty Certificate regarding the year, month and date of purchase, the customers name, the dealers name, and the serial number. (j) When proof of purchase is not presented with this Warranty Certificate. 4. This Warranty applies to the product only; the Warranty does not apply to any other accessory equipment, such as the case, strap, lens cap and batteries. 5. Olympuss sole liability under this warranty shall be limited to repairing or replacing the product. Any liability for indirect or consequential loss or damage of any kind incurred or suffered by the customer due to a defect of the product, and in particular any loss or damage caused to any lenses, films, other equipment or accessories used with the product or for any loss resulting from a delay in repair or loss of data, is excluded. Compelling regulations by law remain unaffected by this.
Notes regarding warranty maintenance
1. This warranty will only be valid if the Warranty Certificate is duly completed by Olympus or an authorized dealer or other documents contain sufficient proof. Therefore, please make sure that your name, the name of the dealer, the serial number and the year, month and date of purchase are all completed or the original invoice or the sales receipt (indicating the dealers name, the date of purchase and product type) is attached to this Warranty Certificate. Olympus reserves the right to refuse free-of-charge service if neither Warranty Certificate is completed nor the above document is attached or if the information contained in it is incomplete or illegible. 2. Since this Warranty Certificate will not be re-issued, keep it in a safe place. * Please refer to the list on the website: http://www.olympus.com for the authorized international Olympus service network.

NTSC... 29, 59 Number of storable still pictures. 53
OLYMPUS Master. 38, 43 Operation guide.. 19, 32 Optical zoom.. 16, 18
PAL.. 29, 59 PANORAMA. 22 PC.. 38, 42 PictBridge.. 30, 59 PIXEL MAPPING.. 27 Pixels.. 59 Playback mode q.. 9, 15, 18, 77 Playback on a TV.. 29 Playing time/Total recording time. 24 o button.. 5, 14 Press completely. 8 Press halfway. 8 PRINT ORDER.. 33 PRINT ORDER <.. 26 Print settings. 35 Printing pictures. 30 PROTECT 0.. 25

TFT.. 59 Top menu... 19

USB cable. 3, 31, 38, 42 USB driver.. 39, 48
VIDEO OUT.. 29 VOLUME. 24, 28
Recording movies with or without sound R.. 28 Red-eye reduction flash !. 17 Remaining recording time.. 53 RESET.. 22, 55 RESIZE.. 25 ROTATE.. 25

xD-Picture Card.. 22, 62

Zoom.. 18 Zoom button.. 18

VH740501