Reviews & Opinions
Independent and trusted. Read before buy Olympus VN-960 PC!

Olympus VN-960 PC

Manual

Preview of first few manual pages (at low quality). Check before download. Click to enlarge.
Manual - 1 page  Manual - 2 page 

Download (English)
Olympus VN-960 PC, size: 341 KB
Instruction: After click Download and complete offer, you will get access to list of direct links to websites where you can download this manual.

About

Olympus VN-960 PCOlympus VN-960PC 128 MB Digital voice recorder - 128 MB flash
No matter where you are, the VN-960PC is a reliable companion. It ensures your notes and ideas won't be lost forever. A fast USB connection allows for hassle-free downloading of files to a PC for archiving or further processing. Its handy scheduler function with alarm facility also helps you manage your time more effectively. This digital voice recorder provides capacity for more than 16 hours of recordings and stores up to 100 files in each of its four folders for easy organization.

 

[ Report abuse or wrong photo | Share your Olympus VN-960 PC photo ]

User reviews and opinions

<== Click here to post a new opinion, comment, review, etc.

Comments to date: 5. Page 1 of 1. Average Rating:
harvs 5:39am on Tuesday, November 2nd, 2010 
not user friendly I bought this a while ago and really just began to use it recently. Excellent for the student I bought this recorder a couple of years ago and it has held up great!!!
gnewt 5:03pm on Wednesday, September 1st, 2010 
It does the job, but it could have been a lot better for the price I bought this digital voice recorder for my MA fieldwork.
dandelion 6:17pm on Monday, August 2nd, 2010 
My wife owns a slightly lesser model but the case and controls are exact, she is very hard on small electronic devices like cell phones and such. Great. A great voice recorder. Even works well for "in the pocket" recordings. USB connectivity is a must No off button, simple idle poweroff
cmarkle 9:31pm on Thursday, April 29th, 2010 
I had this unit for a month and loved it. Overall, this product is everything I expected, and then some. At a cost of less then $100 it offers a sixteen hours of recording time and also includes USB...
juniperl13 1:18pm on Saturday, April 24th, 2010 
It does the job, but it could have been a lot better for the price I bought this digital voice recorder for my MA fieldwork.

Comments posted on www.ps2netdrivers.net are solely the views and opinions of the people posting them and do not necessarily reflect the views or opinions of us.

 

Documents

doc0

Getting Started

DIGITAL VOICE RECORDER

Recording

Set the HOLD switch to the HOLD position. All operation buttons are disabled. This feature is useful when the recorder has to be carried in a handbag or pocket. Remember to reset the HOLD switch before attempting to use the recorder.
The alarm will sound at the scheduled time even if the recorder is set to HOLD. The recorder will then begin to play the file associated with the alarm once you press any button. The recorder functions as follows with the HOLD switch set to the HOLD position: If the recorder is playing, the display goes dark when playback of the current file has completed. When you set the HOLD switch to the HOLD position while playing back, you can still adjust the volume using the VOLUME control. If the recorder is recording, the display goes dark when the recorder stops recording automatically upon running out of free memory.

Playing Back

Press the FOLDER button to select the desired folder (A, B, C or S). When you select folder S, the current date subfolder appears on the display.
If you select folder S, press the + or button to select the desired date subfolder.

Inserting Batteries

Lightly press down on the arrow and slide the battery cover open. Insert two size-AAA alkaline batteries, observing the correct polarity. Close the battery cover completely. Time/Date screen appears. The hour indicator flashes, indicating the start of the Time/Date setup process. (See Setting Time/Date for details)
VN-120 VN-240 VN-480 VN-120PC VN-240PC VN-480PC VN-960PC
Press the FOLDER button to select the desired folder (A, B, C or S). Press the + or button to select the file to play back. If you select folder S, select the desired date subfolder.
When you select the desired date subfolder, it is useful to press and hold the + or button for 1 second or longer. The recorder locates the next date subfolder that contains recorded files.

a Current folder

Press the REC button to start recording. The Recording/playing lamp turns red, and recording starts.

b Date to record

An optional Ni-MH Rechargeable Battery from Olympus can be used for the recorder.

INSTRUCTIONS

Thank you for purchasing an Olympus Digital Voice Recorder. Please read these instructions for information about using the product correctly and safely. Keep the instructions handy for future reference. To ensure successful recordings, we recommend that you test the record function and volume before use.
Shinjuku Monolith, 3-1 Nishi-Shinjuku 2-chome, Shinjuku-ku, Tokyo 163-0914, Japan. Tel. 03-3340-2111 Two Corporate Center Drive, PO BOX 9058 Melville, NY 11747-9058, U.S.A. Tel. 1-800-622-6372 (Premises/Goods delivery) Wendenstrasse 14-18, 20097 Hamburg, Germany. Tel. 040-237730 (Letters) Postfach 08. 20034 Hamburg. Germany. 2-8 Honduras Street, London EC1Y OTX, United Kingdom, Tel. 020-7253-2772 http://www.olympus.com

Y Replacing Batteries

When appears on the display, replace the batteries as soon as possible. Size-AAA appears on the alkaline batteries are recommended. When the batteries are depleted, display, and the recorder shuts off. It is recommended to set the HOLD switch to the HOLD position before you replace batteries to maintain the current settings (time/date, etc.). For your convenience,the recorder also logs the current settings in nonvolatile memory at hourly intervals.

How to Use the Clip

To stop recording, press the STOP button. New recordings are saved as the last file in the folder.
Press the PLAY button to start playback. The Recording/playing lamp turns green, and the elapsed playing time is indicated on the display. Use the VOLUME control to adjust the volume to your liking.
a Current folder b Current file number c Playing time

Y To Pause Recording

To pause
c Current recording mode d Current file number e Recording time f Remaining recording time (REMAIN)
Press the REC button during recording. , PAUSE appears on the display and the Recording/playing lamp flashes.

To resume recording

Y Canceling Playback

To stop

Y Standby Mode and Display Shut Off
If the recorder is stopped or paused for 60 minutes or longer during recording or playing, it goes into Standby (power-save) mode, and the display shuts off. To exit Standby mode and turn on the display, press any button.
Press the REC button again. , Recording will resume at the point of interruption.
Press the STOP button. , The recorder stops in the middle of the file being played.

To resume playback

Press the PLAY button again. , Playback will resume at the point of interruption. When you play back a file in the date subfolder without choosing a specified file, the recorder will play back all the files in the selected date subfolder from filename 01. When you play back a file immediately after recording the file, only the most recently recorded file will be played back.

Setting Time/Date (TIME)

If you have set the time and date, information as to when a sound file was recorded is stored automatically with that file. The time and date must be set to enable management of files in folder S (VN-240/VN-240PC/ VN-480/VN-480PC/VN-960PC), for the alarm playback function, and for the timer recording (VN-480/VN-480PC/VN-960PC). When you install batteries for the first time or each time you replace the batteries, the hour indication will flash. In such a case, be sure to set the time and date by following steps 5 through 9 described below.
Press the area that the arrow points to. Do not force the clip wider, as it may break.

Notes on the Folders

The recorder has four folders: A, B, C, and S. To change the folder selection, press the FOLDER button while the recorder is stopped.

Identification of Parts

Microphone jack Clip Display (LCD panel) Recording/playing lamp DISPLAY button STOP button 0 (Rewind) button/ button PLAY button ERASE button MENU button/ FOLDER button ENTER button/INDEX button* VOLUME control 9 (Fast Forward) button/ + button Battery cover PC (USB) terminal* Built-in speaker REC (Record) button Microphone Earphone jack
Press and hold the MENU button for 1 second or longer. Press the STOP or PLAY button until TIME flashes on the display. Press the ENTER button. The hour indicator flashes. Press the STOP or PLAY button to set the hour. Press the ENTER button to accept the minute. The minute indicator flashes. Pressing the button enables the hour setting again.

2,4,6 3,5,7 1,8

Folders A, B, and C Each recorded file is stored in a folder. Using folders to classify files makes it convenient to find files you want to access later. a Current folder Folder S (VN-240/VN-240PC/VN-480/VN-480PC/VN-960PC) This folder has date subfolders* from January 1 to December 31. Up to 10 files can be stored in each date subfolder, a useful feature for schedule management by storing a certain day's schedule for future reference. To switch between date subfolders, select the S folder, then press the + or button while the recorder is stopped. Up to a total of 100 files can be recorded in folder S.

* There is one subfolder for each day of the year.
If FULL appears on the display, you cannot record in the selected folder. In such a case, erase unnecessary files or download to PC (VN-120PC/VN-240PC/ VN-480PC/VN-960PC). If the recorder is placed directly on a table when recording a meeting, it tends to pick up table vibrations. Put a notebook or other item between the table and the recorder for clearer recording. Even if you press the DISPLAY button, the display will not change to current recording time if the remaining recording time is 5 minutes or less. When remaining recording time falls to 1 minute or less, the Recording/playing lamp flashes red. The recorder will enter Stop mode if it has been left paused for 10 minutes or longer. In case of difficult acoustic conditions or low speakers voice, recording in HQ or SP is recommended. Also, usage of an external microphone (sold separately) could improve the quality of recordings.
Y Forwarding and Rewinding

Fast Forward

Press and hold the 9 button while playing a file. , When you release the 9 button, the recorder will resume normal playback.

Rewind

Press and hold the 0 button while playing a file. , When you release the 0 button, the recorder will resume normal playback. No sound is heard from the built-in speaker during fast forwarding or rewinding. The end of the file is located by pressing and holding the 9 button during fast forwarding. The recorder will pause at the end of the file. If you do not release the 9 button, the recorder will continue fast forward. The beginning of the file is located by pressing and holding the 0 button during rewinding. The recorder will pause at the beginning of the file. If you do not release the 0 button, the recorder will continue rewinding.

LCD Display Information

Folder S (schedule)

Y Changing Playing Speed

You can change the playing speed by pressing the PLAY button while the recorder is playing back.
Normal speed Slow playback ( -20%) Fast playback (+30%)

Folder A

Folder B

Folder C

You can select an option for the display of the recorder. This help review and confirm different recorder settings and file information.

State of the recorder

File Date subfolder
Operation Press and hold the STOP button Press the DISPLAY button
Display The total number of files recorded in the folder and remaining recording time appears on the display. Time Remaining recording time Date Time. (with folder A, B or C selected) The selected indication appears on the display each time the recorder is stopped. The display switches between current recording time and remaining recording time. Playing time Remaining playing time Recording date of the file Recording time of the file Playing time. When the slow playback mode is selected, the SLOW appears and, for the fast playback mode, FAST appears on the display while the recorder is playing back. The recorder stops playing when you press the STOP button while playing back in the slow/fast mode, or when it reaches to the end of the file. If you once press the STOP button and start playback again, the recorder will play back files in normal speed as well.

Maximum of 100 files

* INDEX button.VN-240/VN-240PC/VN-480/VN-480PC/VN-960PC PC (USB) terminal.VN-120PC/VN-240PC/VN-480PC/VN-960PC
After setting the date, press the ENTER button. This completes the time/date setup procedure. Press the MENU button.
Maximum of 100 files in folder S.
Press the STOP or PLAY button to set the minute. Repeat steps 5 and 6 to continue to set the year, month and date in the same way.

While in stop mode

Y Locating the beginning of the file
While the recorder is playing back in the slow/fast mode, pressing the + or button forwards or rewinds to the beginning of the previous or next file respectively. If an index mark is encountered midway, playback begins at that point. (See Index Marks for details)
While in record mode While in playback mode
Press the DISPLAY button Press the DISPLAY button
You can switch the time indication between the 12-hour system and the 24-hour system by pressing the DISPLAY button while you are setting the hour or minute. You can change the order of the date indication by pressing the DISPLAY button while you are setting the year, month, or day. (Example: February 14, 2005) E2-BZ2993-03 AP0504

Maximum of 10 files

Maximum of 100 files in each folder Total of 300 files.
Y Listening with earphones
You can listen to files by connecting earphones to the earphone jack. If an earphone is connected, the speaker doesn't emit sound. Sound will be played back monaurally.
* An earphone is not provided with VN-120,VN-120PC,VN-240 and VN-480. You can use any standard 3.5mm monaural earphone or headphone.
2005.4.8 BZ2993T4 INST EN 3
Erasing from Folder A, B or C
You can easily erase unnecessary files. Sequential file numbers are reassigned automatically.
Using the menu function, you can change various settings according to your preference.

Other Function

Alarm Playback Function ( ) Resetting the Recorder (CLEAR)
This function resets the current time and other settings to their initial status. It is useful if you are having problems with the recorder, or if you want to erase the entire memory of the recorder.

Specifications

Recording medium: Recording time: Built-in flash memory VN-120 (16 MB) / VN-120PC (16 MB) HQ mode: Approx. 43 min SP mode: Approx. 65 min LP mode: Approx. 121 min VN-240 (32 MB) / VN-240PC (32 MB) HQ mode: Approx. 88 min SP mode: Approx. 133 min LP mode: Approx. 245 min VN-480 (64 MB) / VN-480PC (64 MB) HQ mode: Approx. 177 min SP mode: Approx. 267 min LP mode: Approx. 493 min VN-960PC (128 MB) HQ mode: Approx. 355 min SP mode: Approx. 535 min LP mode: Approx. 990 min Electret Condenser Microphone (monaural) Built-in 28 mm round dynamic speaker 120 mW 3.5 mm diameter, impedance 8 3.5 mm diameter, impedance 2 k Two AAA (LR03 or R03) batteries or Two Ni-MH rechargeable batteries Alkaline batteries: About 25 hours Ni-MH rechargeable batteries: About 19 hours 99 (L) 39 (W) 21.5 (T) mm VN-120/VN-240/VN-480: 66.5 g (including batteries) VN-120PC/VN-240PC/VN-480PC/VN-960PC: 68 g (including batteries)
Basic operation of the menu mode
Y Erasing One File at a Time
Press the FOLDER button to select folder A, B, or C. Press the + or button to select the file to be erased. Press the ERASE button. Press the + or button to select the YES. Press the ENTER button.

Menu setting screen

Press and hold the MENU button for 1 second or longer while the recorder is stopped. Press the STOP or PLAY button to select what you would like to set up. The selected menu item flashes. Use the + or button to change the setting. Press the ENTER button to confirm the setting. Press the MENU button to close the menu.
Move the selection one position up/increase the number.
You can use the alarm playback function to sound the alarm tone for 5 minutes at the scheduled time. Within this 5 minutes, pressing any button other than the HOLD switch starts the recorder to play back the pre-selected file. a In Menu mode selection. SET, ON, OFFAfter selecting SET, press the ENTER button to set the time. With the alarm playback function, only one file can be played back. Select a file for the function before setting the time. For S folder, all files contained in the selected date subfolder are played back.

a Alarm indicator

Hold the STOP button, and hold the ERASE button for 3 seconds or longer. Press the + or button to select the YES. Press the ENTER button.
Y To cancel an alarm playback
For in the menu mode, select OFF and press the ENTER button.
Regardless of the selected folder, once the alarm playback is set, it operates every day unless the setting is canceled. To view the current setting, select ON, and then press the ENTER button. The alarm tone stops automatically if no button is pressed within 5 minutes after the alarm starts. The file is not played back in this case. If the recorder has no recorded file in the selected folder, the alarm playback function is not available. Alarm playback occurs every day unless it is set to OFF. Even if no file is recorded in the days date subfolder, the beeps will sound. In such a case, no sound is heard even if you press some button while the alarm is sounding.

Note If you leave the recorder untouched for 8 seconds or longer before you press the ENTER button in Step 3, Clear mode will be canceled, and the recorder will enter Stop mode.

General Precautions

Read this manual carefully to ensure that you know how to operate it safely and correctly. Keep this manual in an easily accessible location for future reference. The warning symbols indicate important safety related information. To protect yourself and others from personal injury or damage to property, it is essential that you always read the warnings and information provided.
Y Erase All Files from a Folder
Move the selection one position to the left.
Move the selection one position to the right.
Press the FOLDER button to select folder. Press the ERASE button twice. Press the + or button to select the YES. Press the ENTER button.
Move the selection one position down/decrease the number.
Microphone: Speaker: Maximum power: Earphone jack (monaural): Microphone jack (monaural): Power supply: Continuous battery use time: Dimensions: Weight:
The recorder will stop if you leave it idle for 3 minutes during a menu setup operation, when a selected item is not applied. If you press the MENU button during a menu setup operation, the recorder will stop and apply the items that were set to that point.
Timer Recording (TIMER) (VN-480/VN-480PC/VN-960PC)
You can schedule for automatic recording, specifying the start time and end time of recording. When the timer-controlled recording completes, the setting is released. In Menu mode selection. SET, ON, OFFAfter selecting SET, press the ENTER button to set the time.
Warning regarding data loss
Recorded content in memory may be destroyed or erased by operating mistakes, unit malfunction, or during repair work. For important recorded content, we recommend you to write it down somewhere (for VN-120/VN-240/VN-480) or make a back-up by downloading to a PC (for VN-120PC/VN-240PC/ VN-480PC/VN-960PC).
If you leave the recorder untouched for 8 seconds or longer before you press the ENTER button, Clear mode will be canceled, and the recorder will enter Stop mode.

Erasing from Folder S

(VN-240/VN-240PC/VN-480/VN-480PC//VN-960PC)
To erase S folder, select S folder, and then press the ERASE button repeatedly to select your desired erasing mode. Each time you press the ERASE button, the erasing mode changes in the following order: by file by date by month by folder disabled.

Recording Modes (HQ SP LP)
You can select from among three recording modes: HQ (High Quality) mode, SP (Standard Playback) mode and LP (Long Playback) mode. In Menu mode selection. HQ, SP, LP

Model Mode

Y To cancel the timer setting
For the timer in the menu mode, select OFF, and then press the ENTER button.
To view the current setting, select ON, and then press the ENTER button. With this function, you can set only the start and the end time of recording. The current settings of the recording mode, microphone sensitivity, VCVA and folder are applied for the settings before you set timer-controlled recording. The setting exceeding the remaining recording time is not allowed. You can record at any time even it is not within the specified recording duration. However, if that makes the remaining recording time insufficient for the timer-controlled recording, the recording will not complete. If any operation is ongoing, the timer-controlled recording is overridden.
For safe And Correct Usage
Do not leave the recorder in hot, humid locations such as inside a closed automobile under direct sunlight or on the beach in the summer. Do not store the recorder in places exposed to excessive moisture or dust. Do not use organic solvents such as alcohol and lacquer thinner to clean the unit. Do not place the recorder on top of or near electric appliances such as TVs or refrigerators. Avoid sand or dirt. These can cause irreparable damage. Avoid strong vibrations or shocks. Do not disassemble, repair or modify the unit yourself. Do not operate the unit while operating a vehicle (such as a bicycle, motorcycle, or go-cart). Keep the unit out of the reach of children.
VN-120 / VN-120PC Approx. 43 minutes Approx. 65 minutes Approx. 121 minutes
VN-240 / VN-240PC Approx. 88 minutes Approx. 133 minutes Approx. 245 minutes
VN-480 / VN-480PC Approx. 177 minutes Approx. 267 minutes Approx. 493 minutes
VN-960PC Approx. 355 minutes Approx. 535 minutes Approx. 990 minutes
Y Erasing One File at a Time in a Date Subfolder

HQ SP LP

a Current recording mode
* Battery life is measured by Olympus. It varies greatly according to the type of batteries used and the conditions of use. * Your recorded contents are for your personal use or pleasure only. It is prohibited to record copyrighted material without permission of the copyright holders according to copyright law. * Specifications and design are subject to change without notice for improvement of performance.

Accessories (Optional)

Ni-MH Rechargeable Battery Charger: BU-400 (Europe only) Ni-MH Rechargeable Battery: BR401 Connecting cord (Earphone jack Microphone jack): KA333 Noise-Cancellation microphone: ME12 Electret condenser microphone: ME15 Headset: E99 Telephone pickup: TP7
Press the FOLDER button to select the folder S. Press the + or button to select the date subfolder. Press the PLAY button. Press the + or button to select the file to be erased. Press the STOP button. Press the ERASE button. Press the + or button to select the YES. Press the ENTER button. Sequential file numbers are reassigned automatically.
The recording time shown above is for one continuous file. The available recording time may be shorter than specified if several files are recorded. (Use the remaining time and recorded time only as references.)
Moving File Between Folders
You can move files recorded in folders A, B and C to other folders. The moved file is added at to the end of the destination folder.

Batteries

Warning
Microphone Sensitivity (HI
In Menu mode selection. HI, LOW
Microphone sensitivity is adjustable to meet your recording needs. HI: High-sensitivity mode that records sounds in all directions. LOW:Low-sensitivity mode suited for dictation.
To ensure successful recording, make a test recording to choose appropriate microphone sensitivity before recording. If you choose HI, we recommend setting the recording mode to HQ or SP to best take advantage of the higher sensitivity. If you choose HI, background noise may be high depending on the recording conditions.
Y Erase All Files in a Date Subfolder
Press the FOLDER button to select the folder S. Press the + or button to select the date subfolder to be erased. Press the ERASE button twice. Press the + or button to select the YES. Press the ENTER button.
a Microphone sensitivity display
Choose the file you want to transfer and press the PLAY button to play it. Press and hold the FOLDER button for 1 second or longer while the file is playing. Press the + or button to choose a destination folder. Press the ENTER button. The destination folder and the number of the moved file appear on the display, and moving is completed.
Batteries should never be exposed to flame, heated, short-circuited or disassembled. Do not attempt to recharge alkaline, lithium or any other non-rechargeable batteries. Never use any battery with a torn or cracked outer cover. Keep batteries out of the reach of children. If you notice anything unusual when using this product such as abnormal noise, heat, smoke, or a burning odor: 1 remove the batteries immediately while being careful not to burn yourself, and; 2 call your dealer or local Olympus representative for servicing.

For customers in North and South America
USA RFI This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. Canadian RFI This digital apparatus does not exceed the Class B limits for radio noise emissions from digital apparatus as set out in the Radio Interference Regulations of the Canadian Department of Communications. Cet appareil numrique ne dpasse pas les limites de Catgorie B pour les missions de bruit radio manant dappareils numriques, tel que prvu dans les Rglements sur lInterfrence Radio du Dpartement Canadien des Communications.

Troubleshooting

Q1 Nothing happens when a button is pressed. A1 The HOLD button may be set to HOLD. The batteries may be depleted. The batteries may be inserted incorrectly. Q2 No sound or quiet sound is heard from the speaker while playing back. A2 The earphone plug may be plugged into the recorder. The volume may be set to the minimum level. Q3 Recording is not possible. A3 By pressing the STOP button repeatedly while the recorder stops, check if the display shows: The remaining recording time in the selected folder may have reached 00:00. The number of files is 100 Check if the display shows FULL by pressing the REC button. The number of files of the same date in folder S may have reached 10. Q4 The playback speed is too fast (slow). A4 The recorder may be set to Fast (slow) Playback. Q5 The remaining recording time seems too short. A5 Some files may be stored in the S folder. Hold the STOP button while in the S folder. The display will show the total number of recordings in the S folder. Q6 You cannot move the file. A6 The number of recorded files in the destination folder may have reached 100. Make sure that you havent transferred to or from the S folder.

Y Erase All Files in a Month Subfolder
Press the FOLDER button to select the folder S. Press the ERASE button three times. Press the STOP or PLAY button to select the month subfolder to be erased. Press the ENTER button. Press the + or button to select the YES. Press the ENTER button.
Using The Variable Control Voice Actuator (VCVA)
When the microphone senses that sounds have reached a preset volume, the built-in Variable Control Voice Actuator (VCVA) starts recording automatically, and stops it when the volume drops. Particularly helpful for extended recording, the VCVA not only conserves memory by turning off recording during silent periods, but also makes playback more efficient and convenient. In Menu mode selection. ON, OFF
The Recording/playing lamp is lit during recording. When the recorder is in Standby mode, the Recording/playing lamp flashes and VCVA flashes on the display. a
a Destination folder b Destination number of the file
If the destination folder is full (100 files), FULL appears on the display, and you cannot move the file to that folder. You cannot move files between folder S and the other folders.
Index Marks (VN-240/VN-240PC/VN-480/VN-480PC/VN-960PC)

a VCVA indicator

Y Erase All Files in the S Folder
Press the FOLDER button to select the folder S. Press the ERASE button four times. Press the + or button to select the YES. Press the ENTER button.
Index marks can be placed in a file during recording or playback to provide and quick and easy way of keeping track of important sections in the file.

For customers in Europe

CE mark indicates that this product complies with the European requirements for safety, health, environment and customer protection. This symbol [crossed-out wheeled bin WEEE Annex IV] indicates separate collection of waste electrical and electronic equipment in the EU countries. Please do not throw the equipment into the domestic refuse. Please use the return and collection systems available in your country for the disposal of this product. Applicable Product : VN-120/VN-240/VN-480/VN-120PC/VN-240PC/VN-480PC/ VN-960PC, Microphone

System Sounds (BEEP)

The recorder beeps to alert you to button operations or warn you of errors. System sounds may be turned off. In Menu mode selection. ON, OFF
If the alarm playback function has been set, the alarm will sound at the scheduled time even if the system sounds are disabled.
Press the INDEX button during recording (pause recording) or playback to set an index mark. An index number appears on the display.

Y Clearing an Index Mark

Press the ERASE button while the index number appears for 2 seconds on the display.

Up to 10 index marks can be set in a file. Sequential index marks numbers are reassigned automatically.

doc1

DIGITAL TECHNICAL SUPPORT OLYMPUS IMAGING AMERICA INC. (888) 553-4448 http://support.ol ympusameri ca.com
Last updated on January 28, 2010
VN-PC Series Driver for 64-Bit Windows OS Compatibility Description This driver will enable the VN-120PC, VN-240PC, VN-480PC, VN-960PC, VN-2100PC, VN3100PC, VN-3200PC and VN-4100PC digital audio recorders to operate with 64-bit editions of the Windows Vista and Windows 7 operating systems. Installation instructions Before installing the driver, Digital Wave Player 2.1.4 or later must be installed on the computer. To check the version of the software, launch the program and, from the Help menu, choose About Digital Wave Player. If the installed version of Digital Wave Player is not at least 2.1.4, do the following: 1. Download the latest update of the Digital Wave Player software. The minimum version required to support Windows Vista and Windows 7 is version 2.1.4, which can be downloaded by clicking on the following link: http://www.olympusamerica.com/files/DigitalWavePlayerUpdate214.zip Note: This download contains only an update program. The full Digital Wave Player application must be installed prior to running the update. A CD-ROM with Digital Wave Player is packaged with each of the affected models; replacement software CD-ROMs can be purchased from The Olympus Store by clicking on the following link: https://emporium.olympus.com/innards/empProdDetails.asp?sku=149320-410 The downloaded zip file contains several versions of the update module. They are identical except for the display language used in the GUI and Help menu. The English version of the update module is DWPUP5EN.exe. Other available languages include Spanish (ES), French (FR), German (GR), Italian (IT) and Russian (RU). 2. Double-click on the file appropriate for the desired display language. For example, to install the English module, double-click on DWPUP5EN.exe. 3. Follow the instructions on the screen to complete the installation. When the software installation is complete, you are ready to install the driver. Do the following: 1. Download the VN-PC Series driver for 64-bit Windows Vista and Windows 7 systems by clicking this link: http://www.olympusamerica.com/files/oima_cckb/VNSeries64Driver.zip. 2. Unpack the zip file by double-clicking on it. 3. Double-click the VNSeries64Driver.exe program file to begin driver installation. Follow the instructions on the screen to complete the installation.
2009 OLYMPUS IMAGING AMERICA INC. All rights reserved. No part of this publication may be reproduced or distributed without the express written permission of Olympus Imaging America Inc. OLYMPUS is a registered trademark of Olympus Corporation, Olympus America, Inc., and/or their affiliated entities. All other trademarks and registered trademarks herein are the property of their respective holders.

Page 1 of 1

 

Technical specifications

General
Product TypeDigital voice recorder
Digital Player TypeFlash based
Width1.5 in
Depth0.9 in
Height3.9 in
Weight2.4 oz
PC Interface SupportedUSB
Audio System
Capacity128 MB
Digital Storage MediaFlash memory - integrated
Sound Output ModeMono
Built-in ClockDigital clock
Built-in Display
Built-in DisplayLCD
Speaker System
Speaker(s)1 x speaker - built-in - 120 mW - 8 Ohm
Driver DetailsSpeaker : 1 x full-range driver - 28mm
Digital Player (Recorder)
Supported Digital Audio StandardsADPCM
Recording Time355 min - HQ (High Quality), 535 min - SP (Standard Play), 990 min - LP (Long Play)
Sample Rate16 kHz, 10.6 kHz, 5.75 kHz
Response Bandwidth300 - 7200 Hz
Connections
Connector Type1 x headphones ( mini-phone 3.5 mm ) 1 x microphone ( mini-phone 3.5 mm ) 1 x USB
Miscellaneous
Cables Included1 x USB cable
Battery
Battery2 x battery - AAA type
Included Qty2
Battery Life DetailsDigital recording - alkaline - up to 25 hour(s)
System Requirements
OS RequiredMicrosoft Windows 2000 Professional, Microsoft Windows Millennium Edition, Microsoft Windows XP Home Edition, Microsoft Windows XP Professional, Microsoft Windows 98/98 Second Edition
Universal Product Identifiers
BrandOlympus
Part Numbers141835, VN-960PC
GTIN00050332298774

 

Tags

NP2500 12 Okifax 160 Nikon Scan Adventure Showtime EZ-guide 500 Vectis 2000 LA40B610 Series 3 Review WV-SW1 LDV-535 RF266abrs XAA Suite 10 730XT GTO6507C S30AW PS42A411c2 MC 2470 NW-MS11 HP2840 Audio 345 RX-Z11 KF320 KX-TG6052B SLD-200 Roland EP-7 MP0804H SCC Siplec RC61 AL2416 Tablet AVR 5000 110 Plus CA950 PD-M550 318TDS DSR-DR1000 SLA5520 Z-560 HDW250 ZWG5141 Omnia I900 SDR-S10 KDL-40E5500 LAN Disk CTK-485 Perfection 4490 Speedtouch 570 EW1248W LDP-600 32PF9641D ZS-S4ipblack Genoa Caplio R5 Humminbird 947C Es500 SGH-X700S Transmitter EXA10J-ex-a10 RA-1210 MIO C230 Galeo 4010 50PG6000 RC197H 795DF TX-L32d28 ER8761B DS3120 P2015N AVR-4308A 74850 I2-I3 F4 PC-100 CH-453 TX-21S1T LAC3810 Navigator 1120C NS-PC18 LCH-TRV900 SGH-Z360 LCM1502TV A1700 Keyboard SGH-E215L BR-6524N CRD-8322B Dmix 300 SE535 Peavey PV Pocketcam 3M KAC-7202 10 13BE Env06 EOS-3 DR7800 300-4 Wizardry 8 A7V333 Aqxl 105

 

manuel d'instructions, Guide de l'utilisateur | Manual de instrucciones, Instrucciones de uso | Bedienungsanleitung, Bedienungsanleitung | Manual de Instruções, guia do usuário | инструкция | návod na použitie, Užívateľská príručka, návod k použití | bruksanvisningen | instrukcja, podręcznik użytkownika | kullanım kılavuzu, Kullanım | kézikönyv, használati útmutató | manuale di istruzioni, istruzioni d'uso | handleiding, gebruikershandleiding

 

Sitemap

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101