One Software for our Compact PLCs

CX-One Lite

Weve upgraded the CX-One Lite Software Package which is designed specifically for low end systems. When using Compact PLCs only, the CX-One Lite is your cost effective programming and configuration tool.
Micro PLC Edition CX-Programmer provides a Smart Input function for intuitive software operation to simplify programming. Support Software applications for the NS-series HMIs, NV-series HMIs, and Temperature Controllers are also included for simple setup operations. Total lead time until the system is up and running is reduced.
Support Software in CX-One The following tables lists the Support Software that can be installed from CX-One
Support Software in CX-One
Micro PLC Edition CX-Programmer CX-Programmer CX-Integrator Switch Box Utility CX-Protocol CX-Simulator CX-Position CX-Motion-NCF CX-Motion-MCH CX-Motion Ver.9. Ver.8. Ver.2. Ver.1. Ver.1. Ver.1. Ver.2. Ver.1. Ver.2. Ver.2.

CX-One Lite Ver.4.0

Yes No Yes Yes No Yes No No No No

CX-One Ver.3.2

No Yes Yes Yes Yes Yes Yes Yes Yes Yes CX-Drive
Ver.1. Ver.5. Ver.3. Ver.3. Ver.1. Ver.4. Ver.1. Ver.1. Ver.3. Ver.4. CX-Process Tool Faceplate Auto-Builder for NS CX-Designer NV-Designer CX-Thermo CX-ConfiguratorFDT CX-FLnet Network Configurator CX-Server
Yes No No Yes Yes Yes Yes No Yes Yes
Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes
Package PLCs with Exceptional Cost
Note: For details, refer to the CX-One Catalog (Cat. No. R134).

Ordering Information

Product name Specifications
CX-One Lite is a subset of the complete CX-One package that provides only the Support Software required for micro PLC applications. CX-One Lite runs on the following OS. Windows 2000 (Service Pack 3 or higher), XP, or Vista CX-One Lite Ver. 4.0 includes Micro PLC Edition CXProgrammer Ver.9.0. The Smart Input function is provided. Micro PLC Support Software The Smart Input function is provided. OS: Windows 2000 (Service Pack 3 or higher), XP, or Vista Applicable models: CP1 , CPM , SRM1 CX-One is a package that integrates the Support Software for OMRON. PLCs and components. CX-One runs on the following OS. OS: Windows 2000(Service Pack3 or higher),XP, or Vista CX-One Ver. 3. includes CX-Programmer Ver. 8.

Number of licenses

Standards
FA Integrated Tool Package CX-One Lite Ver.4.0 Micro PLC Edition CX-Programmer Ver.9.0

1 license

CXONE-LT01C-V4
Micro PLC Edition CX-Programmer can still be ordered individually with the following model number. 1 license CD CD DVD*2 WS02-CXPC2-V9 CXONE-AL01C-V3 *4 CXONE-AL01D-V3 *4
CX-One FA Integrated Tool Package Ver.3. CX-Programmer Ver.8.

1 license*1

CX-Programmer can still be ordered individually in the following model number. PLC Support Software OS: Windows 2000 (Service Pack 3 or higher), XP, or Vista 1 license*3 CD WS02-CXPC1-V8
Note : The Smart Input function is supported only by Micro PLC Edition CX-Programmer version 9.0 or higher and CX-Programmer for CP1E version 1.0. 1 Site licenses are available for the CX-One (3, 10, 30 or 50 licenses). 2 When purchasing the DVD format, verify the computer model and DVD drive specifications before purchasing. 3 Site licenses are available for the CX-Programmer (3 or 10 licenses). 4 CX-Programmer version.8.2 or higher is required for CP1E PLCs. CX-Programmer version 8.2 is available via a CX-One V3 auto update.

For details, refer to the CP1E Data Sheet (Cat. No. P061).
The application examples provided in this catalog are for reference only. Check functions and safety of the equipment before use. Never use the products for any application requiring special safety requirements, such as nuclear energy control systems, railroad systems, aviation systems, medical equipment, amusement machines, vehicles, safety equipment, or other application invalving serious risk to life or property, without ensuring that the system as a whole has been designed to address the risks, and that the OMRON products are properly rated and installed for the intended use within the overall equipment or system.
Warranty and Limitations of Liability
WARRANTY OMRON's exclusive warranty is that the products are free from defects in materials and workmanship for a period of one year (or other period if specified) from date of sale by OMRON. OMRON MAKES NO WARRANTY OR REPRESENTATION, EXPRESS OR IMPLIED, REGARDING NON-INFRINGEMENT, MERCHANTABILITY, OR FITNESS FOR PARTICULAR PURPOSE OF THE PRODUCTS. ANY BUYER OR USER ACKNOWLEDGES THAT THE BUYER OR USER ALONE HAS DETERMINED THAT THE PRODUCTS WILL SUITABLY MEET THE REQUIREMENTS OF THEIR INTENDED USE. OMRON DISCLAIMS ALL OTHER WARRANTIES, EXPRESS OR IMPLIED.
LIMITATIONS OF LIABILITY OMRON SHALL NOT BE RESPONSIBLE FOR SPECIAL, INDIRECT, OR CONSEQUENTIAL DAMAGES, LOSS OF PROFITS, OR COMMERCIAL LOSS IN ANY WAY CONNECTED WITH THE PRODUCTS, WHETHER SUCH CLAIM IS BASED ON CONTRACT, WARRANTY, NEGLIGENCE, OR STRICT LIABILITY. In no event shall the responsibility of OMRON for any act exceed the individual price of the product on which liability is asserted. IN NO EVENT SHALL OMRON BE RESPONSIBLE FOR WARRANTY, REPAIR, OR OTHER CLAIMS REGARDING THE PRODUCTS UNLESS OMRON'S ANALYSIS CONFIRMS THAT THE PRODUCTS WERE PROPERLY HANDLED, STORED, INSTALLED, AND MAINTAINED AND NOT SUBJECT TO CONTAMINATION, ABUSE, MISUSE, OR INAPPROPRIATE MODIFICATION OR REPAIR.
Note: Do not use this document to operate the Unit. OMRON Corporation
Industrial Automation Company Control Devices Division H.Q. Automation & Drive Division Automation Department 1 Shiokoji Horikawa, Shimogyo-ku, Kyoto, 600-8530 Japan Tel: (81) 75-344-7084/Fax: (81) 75-344-7149 OMRON ELECTRONICS LLC One Commerce Drive Schaumburg, IL 60173-5302 U.S.A. Tel: (1) 847-843-7900/Fax: (1) 847-843-7787 OMRON ASIA PACIFIC PTE. LTD. No. 438A Alexandra Road # 05-05/08 (Lobby 2), Alexandra Technopark, Singapore 119967 Tel: (65) 6835-3011/Fax: (65) 6835-2711 OMRON (CHINA) CO., LTD. Room 2211, Bank of China Tower, 200 Yin Cheng Zhong Road, PuDong New Area, Shanghai, 200120, China Tel: (86) 21-5037-2222/Fax: (86) 21-5037-2200

Authorized Distributor:

Economy

E ff i c i e n t

Regional Headquarters OMRON EUROPE B.V. Wegalaan 67-69-2132 JD Hoofddorp The Netherlands Tel: (31)2356-81-300/Fax: (31)2356-81-388

OMRON Industrial Automation Global: www.ia.omron.com
OMRON Corporation 2009 All Rights Reserved. In the interest of product improvement, specifications are subject to change without notice. Printed in Japan Cat. No. P060-E1-(0309) (w)
Cost-Effective, Easy Application, Application to Many Systems
Program capacity : 2 Ksteps DM Area capacity : 2 Kwords Timers/Counters : 256 each

Exceptional Cost

Responding to Global Competition with More Device Control Possibilities
The CP1E all-in-one package PLCs provide high cost performance to further reduce costs by allowing you to select the optimal CPU Unit from the E-type Basic Models or N-type Application Models.
High-speed counters : 10 kHz 6 inputs
Exceptional Cost. Optimal cost with a selection of two types of CP1E CPU Units.

Easy Easy

Peripheral USB port Analog adjusters : 2 adjusters Program capacity : 8 Ksteps DM Area capacity : 8 Kwords Timers/Counters : 256 each
The Basic Models provide cost performance and easy application.
Support Software with Smart Input intuitive operation. USB port provides. Support Software can be connected using commercially available USB cables.

Efficient

Option Battery
High-speed counters : 100 kHz 2 inputs and 10 kHz 4 inputs
The optimal cost can be achieved efficiently with two types CP1E CPU Units.

Program capacity

N-type CPU Units for small-scale systems. Option Units for increased expandability.

N-type CP1E CPU Units

Application Models

8K steps

CP1E-N20D -

CP1E-N30D -

CP1E-N40D -

E-type CP1E CPU Units

2K steps

Basic Models

Peripheral USB port Analog adjusters : 2 adjusters
Serial Option port : 1 port*1 Pulse outputs : 100kHz x 2 outputs*2 Serial communications port : RS-232C
*1 : Models with 30 or 40 I/O points. *2 : Models with transistor outputs.

CP1E-E20DR-A

CP1E-E30DR-A

CP1E-E40DR-A

Number of I/O points
Compatible with small Programmable Terminals and inverter-controlled position control.

Simple and User Friendly

Easy Ladder Programming with Smart Input.

Easy Input Editor

Instruction and Address Input Assist Functions
When you begin typing an instruction from the keyboard in Ladder Editor Mode, suggested instructions are displayed and the addresses are automatically entered. Connecting lines are added automatically based on the cursor position, enabling intuitive ladder programming.

Intuitive control with Smart Input. Visual decision making is supported with the display of terminal locations.
Easily Reuse Ladder Programming
Copying with Address Incrementing
To create the same group of ladder instructions more than once, with the address addition copy function, the instructions can be reused simply by inputting an address offset.

Intuitive Menu Structure

Intuitive Menu Display
An intuitively designed menu structure makes it easy to see the overall system simply by looking at the menu for smooth operation without referring to a manual.

30%Faster

Note. In the case of program capacity 1.5 Ksteps

Ladder Programming

0.00 0.01

100.00

Easy Input Editor with Smart Input Function
When you begin typing an instruction in Ladder Editor Mode, suggested instructions are displayed.

Offset set to 5 bits

0.05 0.06

100.05

The function required for process is grouping.

Smart Input Function

Guidance display
Commercially Available USB Cables Can Be Connected
CP1E CPU Units use USB for the peripheral port. Computers can be connected using commercially available USB cables. Without the need for USB conversion cables or special cables, connection is easier and cable cost is low.
Commercially available USB cable Support Software
Select the desired instruction and the addresses will be set to one higher than the addresses that were previously entered.
Enter the operands. I/O comments can also be e n t e re d a t t h e s a m e time.
User-friendly Ladder Program Input
Automatic Connecting Line Insertion
With the automatic connecting line insertion function the necessary connection is added automatically based on the curser position.

I/O Status at a Glance

The terminal layout display features I/O indicators. The indicators are in the same position as the terminals to let you see the I/O status at a glance. You can easily identify I/O status or perform status checks at startup or during operation.

ON N ON N OFF ON

Automatic Column Insertion When Inserting Instructions
The column is automatically inserted when an instruction is added even if the curser is above another instruction.

Sensors ensors s

Visible Status
When an instruction is input at the curser, a connecting line is automatically inserted.
When an instruction is input at the curser, a column is automatically inserted for the instruction.

Efficient and Ef fective

More Applications with Advanced Control Capabilities and Functionality
The CP1E N-type CPU Units are equipped with high-speed counters, pulse outputs, and a built-in serial port. These features enable controlling a wide range of devices.
Flexibly handle even small-scale systems. Various Option Units available for increased expandability.

Eff icient

-type only
More Applications with Option Units
Three expansion units / expansion I/O units can be added to a cpu unit with 30 or 40 I/O points. A serial option board can be added to N-type CPU Unit with 30 or 40 I/O points.

PT Connection

Highspeed Counters

Option Units

N-type CPU Unit with 30 or 40 I/O Points
Expansion I/O Units RS-232C Option Board
Expansion Units and Expansion I/O Units
E-type / N-type CPU Unit with 30 or 40 I/O Points
Analog I/O Units Temperature Sensor Units CompoBus/S I/O Link Unit
Built-in RS-232C Built-in USB

CP1W-CIF01

Serial option port RS-485

RS-422A/485 Option Board

CP1W-CIF11 (Maximum transmission distance: 50m)
(Isolated-type) CP1W-CIF12 (Maximum transmission distance: 500m)

Pulse Outputs

Modbus-RTU Easy Master
Units with 40 I/O CP1W-40EDR / CP1W-40EDT / CP1W-40EDT1 Units with 20 I/O CP1W-20EDR1 / CP1W-20EDT / CP1W-20EDT1 Units with 32 Outputs CP1W-32ER / CP1W-32ET / CP1W-32ET1
Units with 16 Outputs CP1W-16ER / CP1W-16ET / CP1W-16ET1 Units with 8 Outputs CP1W-8ER / CP1W-8ET / CP1W-8ET1 Unit with 8 Inputs CP1W-8ED
Analog I/O Unit CP1W-MAD11 Analog Input Unit CP1W-AD041 Analog Output Unit CP1W-DA041

Temperature Sensor Units

(Thermocouples)

CP1W-TS001 CP1W-TS002

(Platinum Resistance Thermometers)
CompoBus/S Slave CP1W-SRT21

CP1W-TS101 CP1W-TS102

Ordering information
International Standards The standards are abbreviated as follows: U: UL, U1: UL(Class I Division 2 Products for Hazardous Locations), C: CSA, UC: cULus, UC1: cULus (Class I Division 2 Products for Hazardous Locations), CU: cUL, N: NK, L: Lloyd, and CE: EC Directives. Contact your OMRON representative for further details and applicable conditions for these standards.

Two 100kHz pulse outputs for high-precision position control.
Note : Models with transistor outputs.
Specify Inverter speeds via RS-485.
E-type CP1E CPU Units ( Basic models)

Product name

E-type with 20 I/O Points E-type with 30 I/O Points E-type with 40 I/O Points
Specifications Power Supply

100 to 240 VAC

Inputs

Outputs

Output type

Relay Relay Relay

Data memory capacity

2K words

CP1E-E30DR-A CP1E-E40DR-A

RS-485

Pulse outputs
Note: There are no accessories included with E-type CP1E CPU Units. A Battery (CP1W-BAT01) cannot be used.
PT RS-232C High-speed counter Rotary encoder

Inverter

N-type CP1E CPU Units ( Application models)
Product name Specifications Power Supply
100 to 240 VAC N-type with 20 I/O Points 24 VDC 12 8
Relay Transistor (sinking) Transistor (sourcing) Relay Transistor (sinking) Transistor (sourcing) Relay Transistor (sinking) Transistor (sourcing) Relay Transistor (sinking) Transistor (sourcing) Relay Transistor (sinking) Transistor (sourcing) Relay Transistor (sinking) Transistor (sourcing)
CP1E-N20DR-A CP1E-N20DT-A CP1E-N20DT1-A CP1E-N20DR-D CP1E-N20DT-D CP1E-N20DT1-D CP1E-N30DR-A CP1E-N30DT-A CP1E-N30DT1-A CP1E-N30DR-D CP1E-N30DT-D CP1E-N30DT1-D CP1E-N40DR-A CP1E-N40DT-A CP1E-N40DT1-A CP1E-N40DR-D CP1E-N40DT-D CP1E-N40DT1-D

Servomotor / Driver

General-purpose motor

8K words

High-speed Counters
Control multiple axes with one PLC using the two 100kHz and four 10kHz, single-phase high-speed counters.
High-speed counter Rotary encoder

Serial PLC Links

Link data with up to 10 words between up to nine CP1E-N CPU Units when controlling a device with multiple CP1E-N PLCs.
Polling Unit Polled Node No. 0 Polled Node No. 7 CJ1M CPU Units can also be connected.
N-type with 40 I/O Points N-type with 30 I/O Points

100 to 240 VAC VDC 12

100 to 240 VAC VDC 16

RS-232C

Polling Unit Polling Unit Polled Node No. 0 Polled Node No. 7 Polling Unit Polled Node No. 0 Polled Node No. 7 Battery Set
Polled Node No. 0 Polled Node No. 7
For N-type CP1E CPU Units Note: Mount a Battery to an N-type CP1E CPU Unit if the data in the following areas must be backed up for power interruptions. DM Area (D) (except backed up words in the DM Area), Holding Area (H), Counter Completion Flags (C), Counter Present Values (C), Auxiliary Area (A) , and Clock Function.(Use batteries within two years of manufacture.)

CP1W-BAT01

Note: There are no accessories included with N-type CP1E CPU Units. RS-232C connectors for the built-in RS-232C port and the Battery (CP1W-BAT01) are not included.

OMRON Corporation 2009 All Rights Reserved. In the interest of product improvement, specifications are subject to change without notice. Printed in Japan CSM_1_1_(0309) (w) Cat. No. P060-E1-02

For more information contact: Omron Electronics LLC Mark Traxler, Public Relations Manager 847-285-7176 Fax 847-285-8176 mark.traxler@omron.com
Omron Introduces the New Economical CP1E Micro PLC
SCHAUMBURG, IL (June, 2009)At Expo Pack 2009 in Mexico City, Omron Electronics LLC (www.omron247.com) will introduce the new compact CP1E series micro programmable controllers designed to meet the performance needs of Latin American manufacturers at an economical price. It delivers an exceptional solution for automating small machines with as few as 20 I/O points and flexibility to expand to 160 I/O. All CPUs offer high- speed USB connection for easy connection and Easy Input Editor for faster programming by using an intuitive predictive ladder editor. Two different families are available: CP1E-E is the economical yet powerful model, while the CP1E-N has a built-in real time clock, motion control capabilities, and an intelligent RS-232 port for connection to an HMI, bar code reader, robot or other serial device. Since the CP1E series shares the same architecture as Omrons CP1L, CP1H, CJ1, and CS1 programmable controller series, but with a smaller yet powerful instruction set, programs are compatible across platforms and allow for easy upward migration.
The CP1E supports programming via CX-One Software that features easy program development as well as on-line editing of program logic. Simulation software included in CXOne allows pre-testing of programs without any hardware and shortens commissioning time.

-More-

Omron CP1E Programmable Controller Page 2 of 2 The CP1E models are available with 20, 30, or 40 I/O built-in. The 30- and 40-point CPUs can be expanded with a wide range of CP1W expansion units up to 160 I/O points. All CP1E-N transistor output models support positioning and motion control with four high-speed encoder inputs (100 kHz) for counters that use two-axis differential phase control or four axes of singlephase control, and two high-speed pulse outputs (100 kHz) for two-axis control. The CP1E-N has a built-in RS-232 port and offers an additional optional port using a plug-in adapter for Ethernet, RS-232, or RS-422A/485 serial communication.
The CP1E is available from stock. Prices vary depending on basic configuration and options chosen. Units are CE approved but currently do not have UL or CSA approvals.
For further information, contact: Omron Electronics de Mexico, S.A., Carr Miguel Aleman Km 41.2 L-21, Parque Alianza, Apodaca NL, 66630, Mexico. Tel.: 52-81-1156-9910. Fax: 52-811156-9939. E-mail: mela@omron.com. Internet: www.omron247.com.
Omron Electronics LLC is a leading global manufacturer of industrial automation products focused on sensing and control technologies. We serve OEM machine builders and end users with a wide range of products that integrate easily into complete automation solutions, offer simple connectivity, and are backed by solid support services. Our extensive product groups include programmable controllers, servo motors and drives, operator interfaces, temperature controllers, sensors, inspection and machine vision systems, RFID track and trace systems, and software. Omron Electronics LLC is the Americas subsidiary of Omron Corporation, a $7 billion global leading supplier of reliable, advanced electronics and control system components and services celebrating 75 years of success. # # #