Y201-EN2-03.book Seite 659 Donnerstag, 30. Mrz 2006 1:52 13

Information

Discontinued Products
OMRON continuously updates its lineup of products. As a consequence, the production of older products that no longer meet market requirements, or which can be replaced by a next generation of products, will be discontinued. The following tables list the products that have been or will be discontinued. Note: Refer to information in this and other relevant catalogs and manuals for information on the recommended replacement product.

Programmable Controllers

Name CJ Series Discontinued models CJ1G-CPU44 CJ1G-CPU45 CJ1W-AD081 CJ1W-CLK21 CJ1W-SCU21 CJ1W-SCU41 CPM1-20EDR CPM1-@0CDR-@ CPM1A CPU Unit CPM1A-20EDR CPM2B-S001M-DRT CPM2C-CIF01 CQM1-CPU@ CQM1-LSE01/02 CQM1-SEN01 CQM1-TU001 CQM1H-CPU42 CQM1H-CPU43 CQM1H-CPU44 CS Series CS1D-LCB05D CS1G-CPU@@ (E)V1 CS1H-CPU@@ (E)V1 CS1W-AD041 CS1W-AD081 CS1W-CLK11 CS1W-CLK12 CS1W-CLK52 CS1W-CLK21 CS1W-DRM21 CS1W-ETN11 CS1W-FLN12 CS1W-HCP22 CS1W-HCA22 CS1W-HIO01 CS1W-MC221 CS1W-MC421 CS1W-PTS01 CS1W-SCB21 CS1W-SCB41 CS1W-SCU21 CVM1-MP702 CVM1-MP703 CVM1-PRS21-V1 CVM1-PRO01 CVM1-MP201-V1 CV500-FDD01/02 CV500-MCA01 CV500-MP311(-E) CV500-SNT31 CV500-VP213(-E) CV500-VP217(-E) CV500-VP223(-E) CV500-VP227(-E) CV500-FHD01(-E) CV500-FHD02(-E) CV500-HDD11-V1 CV500-MR261/-MP602 CV500-BC105 CV500-CN116 CV500-ISX01 CV500-ISP01/02 CV500-ISB01/02 Recommended replacement CJ1G-CPU44H CJ1G-CPU45H CJ1W-AD081-V1 CJ1W-CLK21-V1 CJ1W-SCU21-V1 CJ1W-SCU41-V1 CPM1A-20EDR1 CPM1A-@0CDR-@-V1 CPM1A-V1 CPM1A-20EDR1 CPM2B-S001M-DRT-V1 CPM2C-CIF01-V1 CQM1H-CPU@ Ask your OMRON representative ----CQM1H-CPU51 + CQM1H-AVB41 CQM1H-CPU51 + CQM1H-PLB21 CQM1H-CPU51 + CQM1H-ABB21 CS1D-CPU65P CS1D-CPU67P CS1G-CPU@@H CS1H-CPU@@H CS1W-AD041-V1 CS1W-AD081-V1 CS1W-CLK12-V1 CS1W-CLK12-V1 CS1W-CLK52-V1 CS1W-CLK21-V1 CS1W-DRM21-V1 CS1W-ETN21 CS1W-FLN22 CS1W-HCP22-V1 CS1W-HCA22-V1 CS1W-HIO01-V1 CS1W-MC221-V1 CS1W-MC421-V1 CS1W-PTS01-V1 CS1W-SCB21-V1 CS1W-SCB41-V1 CS1W-SCU21-V1 CVM1-MP702-V1 CVM1-MP703-V1 CVM1-PRS21-V2 CVM1-PRO01-V1 CVM1-MP201-V2 ----WS02-CXPC@-@V@ Ask your OMRON representative ---
CPM1 Series CPM1A Series CPM2B Series CPM2C Series CQM1H/CQM1 Series
Discontinued models CV500-ZN3AT1-E CV500-ZN3DV1 CV500-ZN3PC1 C1000H/C2000H/C500 CPU C1000H-CPU01-V1 Unit C1000H-CPU01-EV1 C1000H-CPU01-E2V1 C2000H-CPU01-V1 C2000H-CPU01-EV1 C2000H-CPU01-E2V1 C500-CPU11-V1/-E2V1 C500-CPUK1 3G2C3-CPU11-EV1 C120 Unit (Input/Output/ C120-DUM01 Dummy/Spacer) C120-IA121/-IA222 C120-ID212 C120-OC223 C120-OD211/-OD212 C120-SP001 C200H Series C200H-APS01/02 C200H-ETL01(-E) C200H-FIM01 C200H-FIM02 FIMC2-SET02 C200H-ID@@@-N C200H-OD@@@-N C200H-MD@@@-N Microwave ID Sensor Unit/ C200H-IDS21 ID Adapter C500-IDS21/-IDS22 C500-IDA22 C200HS Series CPU Unit C200HS-CPU01(-E) C200HS-CPU03(-E) C200HS-CPU21(-E) C200HS-CPU23(-E) C200HS-CPU31(-E) C200HS-CPU01-(E)C C200HS-CPU21-(E)C C200HS-CPU33-(E)C

Name MC Support Software

Recommended replacement WS02-MCTC1-JV@ WS02-MCTC1-EV@ CS1G-CPU42H/43H CS1G-CPU44H/45H CVM1-CPU01-V2/EV2 CVM1-CPU11-V2/EV2 CVM1-CPU21

CJ Series

Ask your OMRON representative ----CJ Series C200H-ID@@@ C200H-OD@@@ C200H-MD@@@ CS1W-SCU21-V1 CS1W-SCB21/41-V1 CS Series CJ Series C200HX/HG/HE

SYSNET Link Unit SYSMAC C200HX/HG/HE PC Card Unit Ethernet Set C200HX Series CPU Unit Open PLC
Memory Cassette for Teaching Box CVM1/CV500 Series
C-Series Optical Host Link Unit (for Large-size PLCs) GPC C Series Ladder-type System Memory Cassette Voice Unit/Voice Memory Unit
Floppy Disk Drive Memory Card Adapter GPC CV-series System Memory Cassette SYSNET Link Unit CV500 Unit
C200HS-SNT32 C200HW-PCS01-V1 C200HW-PCS01-EV1 C200HW-PCS01-V2 C200HX-CPU34D C200HX-CPU64D C200PC-CPU01-R C200PC-CPU15-G C200PC-CPU01-R-V1 C200PC-CPU15-G-V1, and peripheral devices C500-LK101-(P)V1 C500-LK103(-P) 3G2A5-LK101-(P)EV1 C500-MP303-EV2 C500-OV001 C500-MP501-H C500-MP501-T C500-MP503-T C500-MP504-T C200H-OV001 C200H-CN224 C500-SNT31-V4 C@@H C@@K C@@P FIT10-MF301 FIT10-MF321 FIT10-MF331-V2 FIT10-MF341-V2
CS Series C200HX-CPU34 C200HX-CPU64 -----

C200H-LK101-PV1

SYSMAC Support Software ---
SYSNET Link Unit C**@ Series
Ask your OMRON representative CPM2A CPM1A ---------
Logic I/O Package FIT10 Voice Package FIT10 Terminal Package FIT10 NC Package
CS Series CJ Series C200HG-CPU43(-Z) C200HG-CPU43-(Z)E C200HW-PA204S C200HW-PD024 Ask your OMRON representative CS Series
Y201-EN2-03.book Seite 660 Donnerstag, 30. Mrz 2006 1:52 13
Name Discontinued models Memory Card for CS/CJ Se- HMC-EF171/-EF371 ries HMC-EF172 HMC-EF571 HMC-EF861 Memory Card for CV/CVM1 HMC-EP161 Memory Card HMC-ES251/551 Memory for P5R/V8/M5R ROM-G/-GA/-F5 RAM-F Memory ROM-ID-B SP10-ETL01 SP16-ETL01 SP20-ETL01 H-PCF Optical Fiber Cable S3200-CAT2700/2702 Tester Set/Master Fiber Set S3200-CAT3200/3201 S3200-CAT3202/ S3200-CAT2000/2001H S3200-CAT2002/2822 H-PCF Optical Fiber Cable S3200-CAT2820/2821 Tester Heat Unit H-PCH Optical Connector S3200-COCF2511/2011 S3200-COCH62M S3200-COCF62M/62F Optical Connector Assembly S3200-CAK1062 Tool SYSNET Power Supply S3200-CPS05 SYSNET Optical Fiber Cable S3200-FH-L-C22T-@@@ H-PCF Optical Fiber Cable S3200-HBCB101/102/103 Some models) S3200-HBCB501/502 S3200-HCCB101N/102N S3200-HCCB501N/502N H-PCF Cable for SYSNET S3200-HCLB101/102/103 (Without Connector) S3200-HCLB501/502 S3200-HCLO101/102/103 S3200-HCLO501/502 SYSNET Line Server S3200-LSU03-V1/-01E SYSNET NSB S3200-NSB03-V2/11-E SYSNET NSU S3200-NSUA1-10/-00E SYSNET Bridge S3200-NSUG4-10/-00E C500 Series and other Units T1000H-LK203 T1000H-IP006-V1 T1000H-TLK01 3G2T4-ID218 3G2T4-OA122/222 3G2T4-OC221/223/224 3G2T4-OD214/412/413 3G2T8-CN150 3G2T9-IP005-V2 3G2T9-PRO30 C500-DA101-T T200H-CPU01 T200H-ID212 T200H-OA221 T200H-OC225 T200H-OD212 C200HS-TLK01 3G2A5-LD211 C500-LD211 Cassette Interface Unit 3G2A5-CMT01 (-E) Programming Console 3G2A6-PRO20-E GPC C2000 Series Ladder- 3G2C5-MP304-EV3 type System Memory Cassette SYSMAC LINK Support 3G8F4-SLK21 (for PC98) Board Controller Link Support 3G8F5-CLK11(-E) Board NSB for SYSNET 3G8F5-SNT31 3G8F7-CLK21(-E) Controller Link Support 3G8F7-CLK12(-E) Board 3G8F7-CLK52(-E) SP10/SP16/SP20

Recommended replacement HMC-EF372 HMC-EF372 HMC-EF672 HMC-EF372 HMC-EE151 HMC-ES252/552 --ROM-IB ROM-JD-B ---

I/O Relay Terminals

Name G700 Remote Terminal G730-@@@@C (Remote Sensor Terminal 4-point/8-point) G730-M/N Master Module Unit/ G730 Harness Adapter for Master Module Discontinued models G700-EOD32-1 G700-SOC04(-C) G730-ID04C(-A/-B) G730-ID08C(-B) G730-MID32-B G730-MOD32(-A/-B) G730-NID32(-B) G730-NOD32(-B) G730-Y10(-1) Recommended replacement --SRT2-ID08S/-ND08S
Note: The contents of the above table may differ slightly from similar information provided on the Internet.

Connectors

--S3200-COCF2571/2071 ----Ask your OMRON representative --S3200-HCCB101/102/103 S3200-HCCB501/502 Name FA Connectors Servo Relay Units Discontinued models SC-4F4/-4F XW2B-20J6-1 XW2B-40J6-2 XW2B-20J6-3 Recommended replacement SC-4F4D/-4FD XW2B-20J6-1B XW2B-40J6-2B XW2B-20J6-3B

Programmable Terminals

Name Discontinued models NS Series Ladder Monitor for NS-EXT01 Programmable Terminal NS-EXT01-HMC NS-EXT01-L03 NS-EXT01-L10 NS Series Memory Expan- NS-MF081 sion Board NS-MF161 Programmable Terminal NS NS7-SV00(B) Series NS7-SV01(B) NS8-TV0@@-V1 NS10-TV00(B) NS10-TV01(B) NS12-TS00(B) NS12-TS01(B) Programmable Terminal NT10S-SF121(-E) NT10S NT10S-SF122(-E) NT10S-ZA@@@ Programmable Terminal NT11S-SF121(B) NT11S NT11S-ZA3AT-EV1 Connecting Cable for NT Se- NT20M-CNP222/712 ries Key Sheet for NT20M NT20M-CKF01 NT20M Expansion I/O Unit NT20M-IF001 NT20M-MD211 NS-Designer Version Soft- NS-NSDC1-JV1 ware NS-NSDC1-JV2 NS-NSDC1-EV2 NS-NSDC1-V3 NS-NSDC1-V4 NT30/620 System Installer NT-ZS3AT-EV1 NT30-ZS3DV-V1 NT620-ZS3AT-EV1 NT620-ZS3AT-EMV1 NT620-ZS3PC-V1 Programmable Terminal NT30C-ST141B-EK Korean-version NT620C-ST141B-EK NT30C/620C (with black casing only) Programmable Terminal NT31-ST121(B)-(E)V2 NT31/NT31C NT31C-ST141(B)-(E)V2 Key Sheet for NT600M NT600M-CKF01 Dust-proof Chemical-resis- NT600M-KBA02 tant Cover for NT600M NT600M Communications NT600M-LPM31 Interface NT600M Expansion I/O Unit NT600M-MD211 Communication System NT600M-SMR05 ROM for NT600M NT600MS System ROM NT600MS-SMR31 (Host Link) Programmable Terminal NT600MV-DT211 NT600MV/NT610C NT600MV-SMR06V NT610C-DT151(B)-V2 NT610C Water- and NT610C-KBA03 Oil-resistant Kit Programmable Terminal NT610C-SMR@@ NT610C/NT610G NT610G-DT211 Image Memory Board for NT610G-MF151/251 NT610G NT610G-MF551/161 System ROM for NT610G NT610G-SMR01/02/03/08 NT610G-SMR31/32/33/34 Recommended replacement NS-EXT01-V2 NS-EXT01-V2HMC NS-EXT01-V2L03 NS-EXT01-V2L10 --NS8-TV10(B)-V1 NS8-TV11(B)-V1 NS8-TV1@@-V1 NS10-TV00(B)-V1 NS10-TV01(B)-V1 NS12-TS00(B)-V1 NS12-TS01(B)-V1 ----NT11-SF121(B)-EV1 NT-ZJCAT1-EV4 --------NS-NSDC1-V6 NS-NSDC1-V6 NS-NSDC1-V6 NS-NSDC1-V6 NT-ZJCAT1-EV4 NT-ZJCMX1-V4

S3200-CN102-@@-@@ S3200-CN-@@-@@
Ask your OMRON representative Ask your OMRON representative Ask your OMRON representative Ask your OMRON representative CVM1 Series CS Series
--------SYSMAC Support Software
3G8F7-SLK21 (for PCI bus) 3G8F5-SLK21 (for ISA bus) 3G8F7-CLK12 (-E) Ask your OMRON representative 3G8F7-CLK21- (E)V1 3G8F7-CLK12- (E)V1 3G8F7-CLK52- (E)V1
NT31C-ST141-EKV1 NT631C-ST141-EKV1
NT31-ST122(B)-(E)V2 NT31C-ST142(B)-(E)V2 -----

-------

Wiring Devices
Name CompoBus/S Slave Discontinued models SRT1 Series Only SRT2-supporting models Recommended replacement SRT2 Series
----NT631C-ST152(B)-V2 ----NS8-TV10-V1 -------
Y201-EN2-03.book Seite 661 Donnerstag, 30. Mrz 2006 1:52 13
Name Programmable Terminal NT612G Series Programmable Terminal NT625C Series
Discontinued models NT612G-DT211(B)

NT625C-ST152(B)

Recommended replacement NT620S-ST211(B) NS10-TV00(B)-V1 NS8-TV10-V1 NT631C-ST152(B)-V2

Software

Name Open Network Controller Optional Software Data Collection and Distribution Software Open Network Controller Optional Software Website and Mail Service Software FINS Gateway Version2 LAN Time SYSMAC-CPT Discontinued models ITNC-DL1Q-EF ITNC-DL1Q-F Recommended replacement ITNC-DL1Q-ECD-V2 ITNC-DL1Q-CD-V2

ITNC-WE1Q-EF

ITNC-RK1Q-ECD

CX-Programmer

CX-Process
MC Support Tool MC Support Software CXPosition Face Plate Auto-Builder for NS
SFGW-RT-V2(E) SFGW-RT-HLV2(E) SFGW-SDK-V2(E) WS01-CPTC1-J WS01-CPTF1-J WS01-CPTB1-E WS02-CXPC1-E-V3@ WS02-CXPC1-EUP-V3@ WS02-CXPC1-JV3 WS02-CXPC2-JV3 WS02-CXPC1-JV4 WS02-LCTC1-E@@ WS02-LCTC1-J@ WS02-LCTC1-JV3 WS02-LCTC1-EV3 WS02-MCTC1-J WS02-MCTC1-E WS02-NCTC1-J WS02-NCTC1-E WS02-NSFC1-J WS02-NSFC1-E
SFGW-RT-2003(E) SFGW-SDK-2003(E) CX-Programmer WS02-CXPC@ WS02-CXPC1-E-V@@ WS02-CXPC1-EUP-V@@ WS02-CXPC1-JV@ WS02-CXPC2-JV@ WS02-CXPC1-JV@ WS02-LCTC1-EV@@@ WS02-LCTC1-JV@@ WS02-LCTC1-JV@ WS02-LCTC1-EV@ WS02-MCTC1-JV@ WS02-MCTC1-EV@ WS02-NCTC1-JV@ WS02-NCTC1-EV@ WS02-NSFC1-JV@ WS02-NSFC1-EV@

Field Network Devices

Name Remote Terminal Discontinued models DRT1-ID16T(A) DRT1-ID16T(A)-1 DRT1-OD16T(A) DRT1-OD16T(A)-1 DRT1-MD16T(A) DRT1-MD16T(A)-1 DRT1-ID32ML DRT1-ID32ML-1 DRT1-OD32ML DRT1-OD32ML-1 DRT1-MD32ML DRT1-MD32ML-1 3G8B3-BA000 3G8E2-DRM21-E 3G8F5-DRM21-E Recommended replacement DRT2-ID16TA DRT2-ID16TA-1 DRT2-OD16TA DRT2-OD16TA-1 DRT2-MD16TA DRT2-MD16TA-1 DRT2-ID32ML DRT2-ID32ML-1 DRT2-OD32ML DRT2-OD32ML-1 DRT2-MD32ML DRT2-MD32ML-1 --3G8E2-DRM21-EV1 3G8F7-DRM21-E + WS02-CFDC1-E
Battery Unit DeviceNet Configurator PC Card-type DeviceNet Configurator

The contents of the above table may differ slightly from similar information provided on the Internet.
Y201-EN2-03.book Seite 662 Donnerstag, 30. Mrz 2006 1:52 13

Standards

National Standards
Note: For detailed information about applicable standards, refer to the relevant catalog.
BSI SEMKO BEAB FIMKO (Previously SETI)

ASTA Certification

CSA recognition mark by UL
Electrical Appliance and Material Safety Law of Japan

LISTING MARK

RECOGNITION MARK
Special Electrical Appliances and Materials
Other Electrical Appliances and Materials

JIS SEV DEMKO

VDE MARK MONITORING MARK

International Standards

International Standards consist of the IEC standards for electricity and the ISO standards for other areas. IEC (International Electrotechnical Commission) The IEC is a standardization commission founded in 1908 to promote unification and coordination of international standards relating to electricity. It is headquartered in Geneva, Switzerland. Based on reports from member nations on the latest science technologies in those nations, IEC standards are issued as technological standards relating to electricity. Established international safety standards provided by various countries and accepted worldwide are based on IEC standards. Among the authoring committees for IEC standards is the CISPR (International Special Committee on Radio Interference). This committee is responsible to author standards for EMC (Electro-Magnetic Compatibility). In order to simplify approval procedures for electrical devices and promote smooth international trade, there is an international scheme called CB Scheme (Certification Body Scheme), which is authorized by IEC standards. Based on the CB Scheme, safety tests on electrical devices are conducted and certificates are issued if the devices are proved to meet IEC standards. ISO (International Organization for Standardization) The ISO is a standardization commission that officially started activities in 1947 to promote unification and coordination of international standards in all fields (such as machinery and management) except for electricity, which is covered by the IEC. The ISO issues ISO standards, and is headquartered in Geneva, Switzerland.

North America

UL (Underwriters Laboratories Inc.)
A nonprofit organization established in 1894 by the American association of fire insurance companies. Underwriters Laboratories (abbreviated to UL hereafter) conducts approval testing on all kinds of electrical products. In many U.S. cities and states, UL approval is legally required on all electrical items sold. In order to obtain UL approval on an electrical product, all major internal components also require UL approval. UL offers two classifications of approvals, the listing mark and the recognition mark. A Listing Mark constitutes an approval of a complete and final product. Products display the Listing Mark shown at the left above. A Recognition Mark constitutes an approval of a product built into a device or machine. Products display the Listing Mark shown at the right above.
Since October 1992, UL has been approved as a CO (council organization) and TO (test organization) by the SCC (Standard Council of Canada). This authorizes UL to conduct safety tests and certify products conforming to Canadian standards. The above marks are UL marks for products certifying that the products meet Canadian standards. The designs of the listing marks and recognition marks have been revised as shown below. These marks have been effective since November 1998. The previous marks are valid until November 2007.
Y201-EN2-03.book Seite 663 Donnerstag, 30. Mrz 2006 1:52 13

LISTING MARKS

Marks for US Previous mark New mark Marks for Canada Marks for US and Canada
VDE (Verband der Elektrotechnik Elektronik Informationstechnik e. V.), Germany

MONITORING MARK VDE MARK

TV (Technischer berwachungs Verein e. V.), Germany

RECOGNITION MARKS

TV Product Service
DEMKO (Danmarks Elektriske Materielkontrol), Denmark
CSA (Canadian Standards Association)
NEMKO (Norges Elektriske Materiellkontroll), Norweign
FIMKO (Finlands Material Kontroll), Finland
This association descended from a nonprofit, non-government standardization organization established in 1919. In addition to industrial standardization, the association now carries out safety testing on electrical products. Specification authoring: The Canadian Standards Association Product testing and certification: CSA International CSA approval is known as certification, and consequently, CSAapproved equipment is referred to as certified equipment. Products display the mark shown below.
BSI (British Standards Institution) (applicable to industrial products), United Kingdom
BEAB (British Electrotechnical Approvals Board) (applicable to home electronics products), United Kingdom

Europe

EN (Europische Norm = European Standard) Of the EN standards, EN6xxxx standards are based on IEC standards and EN55xxx standards are based on IEC-CISPR standards. Other EN5xxxx standards are unique European standards not found in IEC standards. The marks of the Certification Bodies based on the EN standards in individual countries are shown below.
ASTA (ASTA Certification Services) (applicable to general products), United Kingdom
KEMA (Keuring van Electrotechnische Materialen Nederland B. V.), Netherlands
UTE (Union Technique De Electricite), France
IMQ (Istituto Italiano del Marchio di Qualita), Italy
SEMKO (Svenska Elektriska Materielkontroll Anstalten), Sweden
SEV (Schweizerischer Electrotechnischer Verein), Switzerland
Y201-EN2-03.book Seite 664 Donnerstag, 30. Mrz 2006 1:52 13
EC (European Community) Directives

CE MARKING

Although common requirements for results from test implemented by the various maritime societies is recognized between societies, there are differences in standards between societies that make mutual certification impossible. The required maritime standards must thus be meet, and to register with two or more ship classes requires certification in all of the classes. Members of the IACS ABS (American Bureau of Shipping), USA BV (Bureau Veritas), France CCS (China Classification Society), China DNV (Det Norske Veritas), Norway GL (Germanischer Lloyd), Germany KR (Korean Register of Shipping), Korea LR (Lloyds Register of Shipping), United Kingdom NK (Nippon Kaiji Kyokai), Japan RINA (Registro Italiano Navale), Italy RS (Russian Maritime Register of Shipping), Russia Associate Members of the IACS CRS (Croatian Register of Shipping), Croatia IRS (Indian Register of Shipping), India
EC directives are officially announced to direct the establishment of laws and regulations for the member countries of the EU (European Union). Under one of the EC Directives called the New Approach Directive that covers the Machinery Directive, Low Voltage Directive, and EMC Directive, and other directives, a product must comply with all applicable directives to display the CE marking. Evaluation of compliance with the directives is based on EN standards released as Harmonized Standards in the Official Journal of the European Communities. China CCC (China Compulsory Certification) Mark

CCC MARK

When China joined the WTO (World Trade Organization) in 2001, the certification system for export products and the certification system for nationally distributed products were combined into a new system called the China Compulsory Certification System. The new system was officially announced on 3 December 2001 and started operation on 1 May 2002. From 1 May 2003, importing to or selling products in China is prohibited for any products that have not been certified under the new system. Items for compulsory certification: 19 groups divided into totally 132 product categories are specified as initial items. Applicable standards: GB (Guojia Biaozhun) Chinese National Standards (Electrical standards are based on IEC standards.) Compulsory Certification Mark: Displaying the CCC Mark is required.
Other Maritime Societies CR (China Corporation Register of Shipping), China
Other Electrical Special Electrical Appliances and Materials Appliances and Materials

Shipping Standards

There are more than 20 maritime societies in the world that independently establish standards and undertake certification activities. There is also an international organization called the IACS (International Association of Classification Societies). At present, the IACS has 10 members and two associate members. The member societies of the IACS certify and register approximately 90% of the ships in the world. The ship class is specified by the owner of the ship and the manufacturer undergoes certification according to the request of the owner. Certification for a ship class is closely related to maritime insurance. Only ships that are certified for a specific ship class will be handled by underwriters. Ships without a class will not be underwritten. It is thus necessary for all automated devices on a ship to comply with the maritime standards of each country according to the request of the owner.
Laws governing electrical appliances and materials were revised on 1 April 2001 with the Electrical Appliance and Material Safety Law and previous laws were abolished. New marks were also implemented with the new law. The law covers 112 special items and 340 other items. Paragraph 2 in the Ordinance Concerning Technical Requirements for Electrical Appliances and Materials establishes technical standards (IEC-J) in line with IEC standards. JIS (Japanese Industrial Standards) National standards in Japan are established according to the Industrial Standardization Law. Particularly from 1995, many standards have been established in line with international IEC and ISO standards.
Y201-EN2-03.book Seite 665 Donnerstag, 30. Mrz 2006 1:52 13
Enclosure Ratings (as of July 2002)

Note: The following test methods were used for IP-@@ standards. Confirm protection prior to application using the environment and operating conditions that will exist in the actually application.
IEC (International Electrotechnical Commission) Standards (IEC 529)
JEM (Japan Electrical Manufacturers Association Standards) Standards (JEM 1030)

IP - @ @

Protection Specification Code (International Protection) (IEC529)
1. Protection Against Solid Foreign Objects
Grade Protection No protection
50 dia. mm Full penetration of hard object with 50-mm

IP - @ @ @

3. Protection Against Oil
Grade F Protection Oil proof Criteria Protected against improper operation due to oil drops or spray from any direction. Protected against penetration of oil drops or spray from any direction.
diameter (e.g., hand) not allowed. 2
12.5 dia. mm Full penetration of hard object with 12.5-

Oil resistant

mm diameter (e.g., finger) not allowed. 3 Full penetration of wire or hard object with 2.5-mm diameter not allowed.
NEMA (National Electrical Manufactures Association) Conversion from NEMA to IEC529 (Reverse conversion is not possible.)
NEMA3R 3S IEC60529 IP10 IP11 IP54 IP14 IP54 NEMA250 4, 4X 5 6, 6P 12, 12K 13 IEC60529 IP56 IP52 IP67 IP52 IP54

2.5 mm

Full penetration of wire or hard object with 1.0-mm diameter not allowed.
Ingress of dust to the extent that would interfere with normal operation or safety not allowed. Totally protected against ingress of dust.
Note: Based on the Appendix A of the NEMA Standard. Classification of the NEMA enclosure rating differs from that of the IEC529 in corrosion resistance, rust resistance, and watertightness.
2. Protection Against Harmful Ingress of Water
Grade Protection No particular protection Protection against water drops Criteria No protection again ingress of water. Protected against vertically falling drops of water. Examination method No test Spray water downwards in vertical direction for 10 minutes usng a water-dripping test device.

200 mm

Protection against water spray
Protected against sprays to 60 from the vertical.
Spray water up to 60 in both directions from the vertical axis for 10 minutes using the test device shown below.
Flow per water spray hole: 0.07 l/min
Protection against water splashes

Protected against water splashed from all directions; limited ingress permitted.
Spray water from all directions for 10 minutes using the test device shown below.
Protection against water jets
Protected against adverse affect Spray water from all directions for one minute from low-pressure jets of water from per m of external surface area and for a total all direction. time of no less than 3 minutes using the test device shown below. Protected against ingress of water strong jets of water from all directions. Spray water from all directions for one minute per m of external surface area and for a total time of no less than 3 minutes using the test device shown below.

2.5 to 3 m 12.5 l/min

Discharging nozzle dia.: 6.3

2.5 to 3 m

100 l/min
Discharging nozzle dia.: 12.5
Protection against immersion under water Protection against prolonged immersion under water
Protected against the effects of im- Submerge for 30 minutes at the depth of 1 m mersion under water at the specified (if the device is 850 mm or less in height). depth and for the specified period of time. Protected against long periods of immersion under water.
Test according to the conditions agreed upon between the manufacturer and user.
Protection against water drops
Protected against vertically falling Tilt by 15 and spray water for 10 minutes (2.5 drops of water with enclosure tilted minutes in each direction) using a water-drip15 from the vertical. ping test device.
Y201-EN2-03.book Seite 666 Donnerstag, 30. Mrz 2006 1:52 13
Quality Management System (ISO9001) (July 2002)
Beyond simple product quality to a global enterprise-wide quality assurance system.
Quality Management System (ISO9001)
The Quality Management System (ISO9001) is an international standard for quality control and quality assurance established by the ISO (International Organization for Standardization). It sets forth the requirements for an enterprise-wide quality assurance system.
Fundamental Quality Objectives
Achieving a level of quality that will provide customer satisfaction. Establishing a quality system based on ISO9001 and upgrading support. Maintaining quality assurance with the participation of all employees.
Quality Assurance Certification
For ISO9001 certification, considerations such as the structure of planning, design, and production, and the soundness of the quality assurance system are evaluated. An enterprise that conforms to the standards can receive a certificate of approval.
ISO9001 Certification Status
OMRON has been obtaining ISO9001 certification for all of its groups, and the following table shows the certification status. OMRON continues to put effort into a quality assurance system that will maintain its high standards of reliability worldwide. Companies with ISO9001 Certification (Only Companies and Offices Related to Control Components Are Listed

Quality Assurance Considerations
One of OMRON's management principles is to maximize customer satisfaction.

Management Principles

Maximizing Customer Satisfaction Maximizing customer satisfaction by offering superior products and services based on a Quality First approach. Constant Challenges Shareholder Confidence Respect for the Individual Good Corporate Citizenship Highly Ethical Enterprise Activities These management principles determine the fundamental quality objectives as follows:
Y201-EN2-03.book Seite 667 Donnerstag, 30. Mrz 2006 1:52 13
Environmental Management System (ISO14001) (July 2002)
Configuring a system that constantly reduces environment impact by utilizing environmentally friendly products and business activities.
Environmental Management System (ISO14001)
In contrast to ISO9001, which relates to the Quality Management System, ISO14001 deals with requirements for the Environmental Management System for enterprises and groups. Obtaining ISO14001 certification aims at reducing environment impact throughout the entire organization, and takes into consideration factors such as compliance with laws and regulations, disposal of waste materials, and saving energy. In addition, it requires a commitment to preventing pollution and to continually improving the Environmental Management System and performance (with reductions in environmental impact). Obtaining ISO14001 certification is becoming a condition for participation in business internationally, somewhat like an global business passport. Existing eco-products meet the eco label recognition standards. Relationship between Eco-products and Products Recognized with the Eco Label

Eco label products

Eco label recognition standards

Eco-products

Eco-product standards
Relationship between Eco-products and Products Recognized with the Eco Label
OMRON's Eco Label There are three types of eco labels: Type I, which is determined by third-party standards, such as Japan's Eco Mark or Germany's Blue Angel; Type II, which is a selfdeclared mark determined by OMRON's independent standards; and Type III, in which the environmental capacity is indicated in data sheets and other documents. OMRON's eco-product recognition system conforms to Type II.
Considerations in Technological Development
OMRON is putting effort into developing technology for reducing environmental impact under the headings of the 4 R's: Reject, Reduce, Reuse, and Recycle. Reject (Not using materials that involve legal regulations or health issues) Reduce (Reducing environmental impact) Reuse (Reusing products, parts, and wrapping materials) Recycle (Reusing recyclable materials)

OMRON CORPORATION MISHIMA FACTORY OMRON CORPORATION AYABE FACTORY OMRON CORPORATION MINAKUCHI FACTORY OMRON IIDA CO., LTD. OMRON ICHINOMIYA CO., LTD. OMRON TAKEO CO., LTD. OMRON SANYO CO., LTD. OMRON OKAYAMA CO., LTD. OMRON IZUMO CO., LTD. OMRON ASO CO., LTD. OMRON KURAYOSHI CO., LTD. OMRON KUMAMOTO CO., LTD. OMRON KYOTO TAIYO CO., LTD. OMRON TAIYO CO., LTD. SHANGHAI OMRON AUTOMATION SYSTEM CO.,LTD. OMRON MANUFACTURING OF THE NETHERLANDS B.V. OMRON ELECTRONICS MANUFACTURING OF GERMANY G.m.b.H. OMRON (SHANGHAI) CO.,LTD. OTE ENGINEERING INC. OMRON MANUFACTURING OF AMERICA, INC. OMRON MALAYSIA SDN. BHD. PT OMRON MANUFACTURING OF INDONESIA SHANGHAI OMRON CONTROL COMPONENTS CO.,LTD. OMRON DUALTEC AUTOMOTIVE ELECTRONICS INC. OMRON AUTOMOTIVE ELECTRONICS, INC. OMRON AUTOMOTIVE ELECTRONICS KOREA, CO.,LTD. OMRON ELECTRONICS COMPONENTS LTD.
September 1997 November 1996 June 1997 October 1998 December 1996 February 1998 January 1999 August 1997 January 1998 September 1997 September 1997 August 1997 March 1998 September 2000 November 1998 November 1996 April 1999 December 1998 February 1999 May 1999 December 1998 August 1997 February 1999 April 1999 March 1999 March 1999 February 1998