CX-ONE Software

CX-Designer

CX-Designer data visualization tool for Omron HMIs in the NS- and NSJ-series efficiently creates screens and aids in project debugging. It runs on Windows 98 SE, NT, Me, 2000, or XP.
Share Tag Information with CX-Programmer
Shorten development time and provide valuable information in testing and troubleshooting from tag information shared with CX-Programmer.
Project Management Using Project Workspace
Projects are easy to manage because the entire project structure can be checked at a glance. Screens, alarms, and other common settings can be displayed in a directory tree in the CX-Designer project workspace. Screens and settings can be copied between multiple CX-Designer project workspaces. Screens can also be copied within the same project workspace, and can be classified into any category, e.g., by application, and displayed in a directory tree. When screens are created, consecutive screen numbers are automatically applied to screens in the same category. These numbers can also be changed. The common settings accessed by screens are also copied automatically. If symbols are used, it also becomes easy to change addresses after screens have been copied. This makes screen management even easier.
to your machine without programming. This saves time and money, and enables you to add complex features that were previously not available.
Screens Can Be Created Using Symbols
Symbols can be used with the CX-Designer. Symbols are address to which names have been assigned. In addition to the existing method of directly inputting addresses to be browsed by functional objects, the addresses can also be set by using symbols (names). When the address allocated for a symbol is changed, the address is changed for all objects that access that symbol. This makes it easy to change address allocations and reuse screens. Symbols can also be shared by the CX-Designer and CX-Programmer by copying the symbols from CX-Programmer symbol tables to the CX-Designer.
CX-Designer Can Be Started From CX-Integrator
This capability makes it easy to launch HMI projects while working in other development and monitoring applications in CX-One.
Functional Object Property Settings Using Property Lists
Functional object settings can be changed and checked without having to open a dialog box allowing easy creation and editing of objects. When more than one object is selected, common settings for those objects can be changed in one operation from the property list.

Smart Active Parts

Omrons patented Smart Active Parts are pre-designed screens and components that drag-and-drop from a library and communicate directly with control-system components, for example temperature controllers, inverters and motion controllers. They all feature commonly required customer functionality as standard, and they bring powerful functionality
For complete specifications and additional models:

U.S. www.omron.com/oei

Canada www.omron.ca
CX-ONE Software Test Mode for Created Screens
Prevent problems in commissioning and shorten time to productivity by using the test mode before uploading the project to the HMI. CX-Designer can perform an operating test on the computer without connecting to a PLC. Operation can be checked using screen data on the CX-Designer, if required.

Quick transfers to HMI

Only edited data is automatically transferred to the HMI, shortening transfer times. Objects on the screen can be listed and specified as objects selected. The screen display can also be limited to specified objects. This makes it easy to check and change the property settings for overlapping objects.