FA Integrated Tool Package CX-One

CX-One Ver.4

CSM_CX-One_DS_E_4_1
Greater Integration with the CX-One
The CX-One is a comprehensive software package that integrates PLC Programming Software with Support Software for setting up Networks, Programmable Terminals, Servo Systems, Inverters, and Temperature Controllers.

Features

Integrated Software Management for OMRON PLCs and Components CPU Bus Units and Special I/O Units can be set without concern for memory addresses and without relying on operation manuals Support Software for CPU Bus Units and Special I/O Units can be started from the I/O tables Integrated Simulation for Greater Design and Debugging Efficiency Online Web Services

Ordering Information

Product name Specifications Number of licenses The CX-One is a comprehensive software package that integrates Support Software for OMRON PLCs and components. CX-One runs on the following OS. Windows XP (Service Pack 3 or higher), Vista or 7 Note: Except for Windows XP 64-bit version. CX-One Lite is a subset of the complete CX-One package that provides only the Support Software required for micro PLC applications. 1 license CX-One Lite runs on the following OS. Windows XP (Service Pack 3 or higher), Vista or 7 Note: Except for Windows XP 64-bit version. CD CXONE-LT01C-Vlicense 3 licenses 10 licenses 30 licenses 50 licenses Media DVD DVD DVD DVD DVD Model CXONE-AL01D-V4 CXONE-AL03D-V4 CXONE-AL10D-V4 CXONE-AL30D-V4 CXONE-AL50D-V4 Standards
FA Integrated Tool Package CX-One Ver.4.1
FA Integrated Tool Package CX-One Lite Ver.4.1
Note: 1. The CX-One is also available on CD (CXONE-AL@@C-V4). Site licenses are available for users who will run CX-One on multiple computers. Ask your OMRON sales representative for details. 2. The CX-One and CX-One Lite cannot be simultaneously installed on the same computer.

Product Configuration

Setup disk: (CD) CD 4 pieces in the case (DVD) DVD 1 piece in the case * Guidance: A4 size, English/Japanese Product Registration Guide, Japanese User license agreement/User registration card,English/Japanese * CX-One Lite has the CD version only.

Support Software

The following tables lists the Support Software that can be installed from CX-One
Support Software in CX-One CX-Programmer CX-Integrator Switch Box Utility CX-Protocol CX-Simulator CX-Position CX-Motion-NCF CX-Motion-MCH CX-Motion CX-Drive CX-Process Tool Faceplate Auto-Builder for NS CX-Designer NV-Designer CX-Configurator FDT CX-Thermo CX-FLnet Network Configrator CX-Server Outline Application software to create and debug programs for SYSMAC CS/CJ/CP/NSJ-series, C-series, and CVM1/C-series Ver.9.2 CPU Units. Data can be created and monitored for high-speed-type Position Control Units. Application software to build and set up FA networks, such as Controller Link, DeviceNet, CompoNet, CompoWay, and Ver.2.4 Ethernet networks. The Routing Table Component and Data Link Component can be started from here. DeviceNet Configuration functionality is also included. Ver.1.6 Ver.1.9 Ver.1.9 Ver.2.5 Ver.1.9 Ver.2.2 Ver.2.3 Utility software that helps you to debug PLCs. It helps you to monitor the I/O status and to monitor/change present values within the PLC you specify. Application software to create protocols (communications sequences) between SYSMAC CS/CJ/CP/NSJ-series or C200HX/HG/HE Serial Communications Boards/Units and general-purpose external devices. Application software to simulate SYSMAC CS/CJ/CP/NSJ-series CPU Unit operation on the computer to debug PLC programs without a CPU Unit. Application software to create and monitor data for SYSMAC CS/CJ-series Position Control Units (except for Highspeed type). Application software to monitor and set parameters for SYSMAC CS/CJ-series Position Control Units and Servo Drivers that support MECHATROLINK-II communications. Application software to create data for SYSMAC CS/CJ-series MCH Units, create motion programs, and perform monitoring. Application software to create data for SYSMAC CS/CJ-series, C200HX/HG/HE, and CVM1/CV-series Motion Control Units, and to create and monitor motion control programs. Application software to create and debug function block programs for SYSMAC CS/CJ-series Loop Controllers (Loop Control Units/Boards, Process Control CPU Units, and Loop Control CPU Units). Application software that automatically outputs screen data as project files for NS-series PTs from tag information in function block programs created with the CX-Process Tool.

Ver.2.2 Application software to set and control data for Inverters and Servos. Ver.5.2 Ver.3.1
Ver.3.2 Application software to create screen data for NS-series PTs. Ver.1.1 Application software to create screen data for NV-series small PTs. Ver.1.2 Application software for setting various units by installing its DTM module. Ver.4.2 Application software to set and control parameters in components such as Temperature Control Units. Ver.1.0 Application software for system setting and monitoring of SYSMAC CS/CJ-series Fl-net Units. Ver.3.2 Application software to setup and monitor tag data Link for CJ2 (Built-in EtherNet/IP) CPU Units and EtherNet/IP Units. Ver.4.5 Middleware necessary for CX-One applications to communicate with OMRON components, such as PLCs, Display Devices, and Temperature Control Units. A group of components used with CX-One applications, such as the CX-Programmer and CX-Integrator. Includes the following: I/O tables, PLC memory, PLC Setup, Data Tracing/Time Chart Monitoring, PLC Error Logs, File Memory, PLC clock, Routing Tables, and Data Link Tables.
PLC Tools (Installed automatically.)

System Requirements

Item Operating system (OS) (See note 1, 2.) Japanese or English system CPU Memory (See note 3.) Hard disk Display Disk drive Communications ports Other Requirement Microsoft Windows XP (Service Pack 3 or higher), Vista or 7 A processor recommended by Microsoft A memory recommended by Microsoft Approx. 2.8 GB or more available space is required to install the complete CX-One package. XGA (1,024 768), High-Color 16-bit min. CD-ROM drive or DVD-ROM drive RS-232C port, USB port, or Ethernet port (see note 4.) Internet access is required for online user registration, including a modem or other hardware connection method.
Note: 1. CX-One Operating System Precaution 1) System requirements and hard disk space may vary with the system environment. 2) Except for Windows XP 64-bit version. 2. The following restrictions apply when CX-One is used with Microsoft Windows Vista/7. 1) Some Help files cannot be accessed. The Help files can be accessed if the Help program distributed by Microsoft for Windows Vista (WinHlp32.exe) is installed. Refer to the Microsoft homepage listed below or contact Microsoft for details on installing the file. (The download page is automatically displayed if the Help files are opened while the user is connected to the Internet.) http://support.microsoft.com/kb/917607/en-us 2) The following restrictions apply to some application operations.
Application CX-Designer/ NV-Designer CX-Programmer/ CX-Integrator/ Network Configurator Restriction If a new Windows Vista font (e.g., Meiryo) is used in a project, the font size on labels may be bigger and protrude from the components if the project is transferred from CX-Designer running on a Windows XP or earlier OS to the NS/NSJ. Although you can install CPS files, EDS files, Expansion Modules, and Interface Modules, the virtual store function of Windows Vista or Windows 7 imposes the following restrictions on the use of the software after installation. These restrictions will not exist if application data is installed using Run as Administrator. If another user logs in, the applications data will need to be installed again. The CPS files will not be automatically updated. Restrictions are imposed on the following functions. The driver cannot be changed from the default setting if Controller Link is set as the network type in the Change PLC dialog box. Online connections will not be possible through Controller Link Boards or SYSMAC LINK Boards. Online connections using FinsGateway as the network type will not be possible from the CX-Programmer or CX-Integrator. Communications will not be possible though a CS1 Board and PCI bus.

CX-Server

3. The amount of memory required varies with the Support Software used in CX-One for the following Support Software. Refer to user documentation for individual Support Software for details. CX-Programmer, CX-Designer, CX-Thermo, CX-Simulator, CX-Protocol, CX-Motion, CX-Drive, CX-Process Tool, and Faceplate AutoBuilder for NS 4. Refer to the hardware manual for your PLC for hardware connection methods and cables to connect the computer and PLC.
Hard Disk Space Requirements
Support Software in CX-One CX-Programmer CX-Integrator CX-Position CX-Motion CX-Motion-NCF CX-Motion-MCH CX-Drive CX-Designer CX-Process Tool Faceplate Auto-Builder for NS CX-Protocol CX-Simulator CX-Thermo CX-Flnet Switch Box NetworkConfigrator CX-Server and PLC Tools Approx. hard disk space required. Approx. 270 MB Approx. 260 MB Approx. 15 MB Approx. 45 MB Approx. 200 MB Approx. 60 MB Approx. 150 MB Approx. 730 MB Approx. 100 MB Approx. 70 MB Approx. 20 MB Approx. 60 MB Approx. 95 MB Approx. 2 MB Approx. 5 MB Approx. 20 MB Approx. 560 MB Always installed. (See note 1.) Options can be selected or cleared to install or not install individual Support Software. Remarks
Note: 1. Approximately 560 MB of unused space is required in the system drive (e.g., the C drive). 2. If the complete CX-One package is installed, approximately 2.8 GB of hard disk space will be required (including workspace required for installation). Check available space on your hard disk before installing software.

Related Manuals

Cat. No. W463 Model CXONE-AL@@C-V4/ AL@@D-V4 Manual name CX-One Setup Manual Contents Installation and overview of CX-One FA Integrated Tool Package.
Read and Understand This Catalog
Please read and understand this catalog before purchasing the products. Please consult your OMRON representative if you have any questions or comments.
Warranty and Limitations of Liability

WARRANTY

OMRON's exclusive warranty is that the products are free from defects in materials and workmanship for a period of one year (or other period if specified) from date of sale by OMRON. OMRON MAKES NO WARRANTY OR REPRESENTATION, EXPRESS OR IMPLIED, REGARDING NON-INFRINGEMENT, MERCHANTABILITY, OR FITNESS FOR PARTICULAR PURPOSE OF THE PRODUCTS. ANY BUYER OR USER ACKNOWLEDGES THAT THE BUYER OR USER ALONE HAS DETERMINED THAT THE PRODUCTS WILL SUITABLY MEET THE REQUIREMENTS OF THEIR INTENDED USE. OMRON DISCLAIMS ALL OTHER WARRANTIES, EXPRESS OR IMPLIED.

LIMITATIONS OF LIABILITY

OMRON SHALL NOT BE RESPONSIBLE FOR SPECIAL, INDIRECT, OR CONSEQUENTIAL DAMAGES, LOSS OF PROFITS OR COMMERCIAL LOSS IN ANY WAY CONNECTED WITH THE PRODUCTS, WHETHER SUCH CLAIM IS BASED ON CONTRACT, WARRANTY, NEGLIGENCE, OR STRICT LIABILITY. In no event shall the responsibility of OMRON for any act exceed the individual price of the product on which liability is asserted. IN NO EVENT SHALL OMRON BE RESPONSIBLE FOR WARRANTY, REPAIR, OR OTHER CLAIMS REGARDING THE PRODUCTS UNLESS OMRON'S ANALYSIS CONFIRMS THAT THE PRODUCTS WERE PROPERLY HANDLED, STORED, INSTALLED, AND MAINTAINED AND NOT SUBJECT TO CONTAMINATION, ABUSE, MISUSE, OR INAPPROPRIATE MODIFICATION OR REPAIR.

Application Considerations

SUITABILITY FOR USE

OMRON shall not be responsible for conformity with any standards, codes, or regulations that apply to the combination of products in the customer's application or use of the products. At the customer's request, OMRON will provide applicable third party certification documents identifying ratings and limitations of use that apply to the products. This information by itself is not sufficient for a complete determination of the suitability of the products in combination with the end product, machine, system, or other application or use. The following are some examples of applications for which particular attention must be given. This is not intended to be an exhaustive list of all possible uses of the products, nor is it intended to imply that the uses listed may be suitable for the products: Outdoor use, uses involving potential chemical contamination or electrical interference, or conditions or uses not described in this catalog. Nuclear energy control systems, combustion systems, railroad systems, aviation systems, medical equipment, amusement machines, vehicles, safety equipment, and installations subject to separate industry or government regulations. Systems, machines, and equipment that could present a risk to life or property. Please know and observe all prohibitions of use applicable to the products. NEVER USE THE PRODUCTS FOR AN APPLICATION INVOLVING SERIOUS RISK TO LIFE OR PROPERTY WITHOUT ENSURING THAT THE SYSTEM AS A WHOLE HAS BEEN DESIGNED TO ADDRESS THE RISKS, AND THAT THE OMRON PRODUCTS ARE PROPERLY RATED AND INSTALLED FOR THE INTENDED USE WITHIN THE OVERALL EQUIPMENT OR SYSTEM.

PROGRAMMABLE PRODUCTS

OMRON shall not be responsible for the user's programming of a programmable product, or any consequence thereof.

Disclaimers

CHANGE IN SPECIFICATIONS
Product specifications and accessories may be changed at any time based on improvements and other reasons. It is our practice to change model numbers when published ratings or features are changed, or when significant construction changes are made. However, some specifications of the products may be changed without any notice. When in doubt, special model numbers may be assigned to fix or establish key specifications for your application on your request. Please consult with your OMRON representative at any time to confirm actual specifications of purchased products.

DIMENSIONS AND WEIGHTS

Dimensions and weights are nominal and are not to be used for manufacturing purposes, even when tolerances are shown.

PERFORMANCE DATA

Performance data given in this catalog is provided as a guide for the user in determining suitability and does not constitute a warranty. It may represent the result of OMRONs test conditions, and the users must correlate it to actual application requirements. Actual performance is subject to the OMRON Warranty and Limitations of Liability.

ERRORS AND OMISSIONS

The information in this document has been carefully checked and is believed to be accurate; however, no responsibility is assumed for clerical, typographical, or proofreading errors, or omissions.
2010.10 In the interest of product improvement, specifications are subject to change without notice.
Industrial Automation Company

http://www.ia.omron.com/

OMRON Corporation
(c)Copyright OMRON Corporation 2010 All Right Reserved.

FA Integrated Tool Package CX-One

CX-Programmer Ver.9

CSM_CX-Programmer_DS_E_5_1
Improve Productivity for SYSMAC PLCs from Ladder Program Development and Unit Setup to Debugging and Maintenance
Application software to create and debug programs for SYSMAC CS/CJ/CP/NSJ-series, C-series, and CVM1/C-series CPU Units.
Note: The CX-Programmer is included in the CX-One FA Integrated Tool Package.

Features

Easily Achieve Position Control with Wading Through User Manuals. Complete Support for Synchronous Operation between Units. Easier Connection to PLCs. Batch Backup/Restore with a Computer. Comprehensive Programming Environment. High Program Readability. Time Required for Onsite Startup and Debugging Has Been Significantly Reduced.

Ordering Information

Support Software
Specifications Product name The CX-One is a package that integrates the Support Software for OMRON PLCs and components. FA Integrated Tool Package CX-One Ver.4.@ CX-One runs on the following OS. Windows XP (Service Pack 3 or higher), Vista or 7 Note: Expect for Windows XP 64-bit version. CX-One Ver.4.@ includes CX-Programmer Ver.9.@. For details, refer to the CX-One catalog (Cat. No. R134). CX-One Lite is a subset of the complete CX-One package that provides only the Support Software required for micro PLC applications. FA Integrated Tool Package CX-One Lite Ver.4.@ CX-One Lite runs on the following OS. Windows XP (Service Pack 3 or higher), Vista or 7 Note: Expect for Windows XP 64-bit version. CX-One Lite Ver.4.@ includes Micro PLC Edition CX-Programmer Ver.9.@. 1 license CD CXONE-LT01C-Vlicense *1 DVD *2 CXONE-AL01D-V4 Number of licenses Media Model Standards
Note: The CX-One and CX-One Lite cannot be simultaneously installed on the same computer. *1. Multi licenses are available for the CX-One (3, 10, 30, or 50 licenses). *2. The CX-One is also available on CD (CXONE-AL@@C-V4).

Product Configuration

Setup disk : (CD) CD 4 pieces in the case (DVD) DVD 1 piece in the case * Guidance : A4 size, English/Japanese Product Registration Guide, Japanese User license agreement/User registration card, English/Japanese * CX-One Lite has the CD version only.

Main Functions

Category
Create Ladder program on Ladder View Create Function Block Call on Ladder View Create Rung Comment on Ladder View Ladder Create Symbol Comments on Ladder View Create Attached Comment on Ladder View Create Ladder program on Mnemonic View Create Ladder program by smart Input Mode Structured Text (ST) SFC Create Program in Structured Text language Create Program in SFC Create SFC Action program in Ladder or Structured Text language Create SFC Transition program in Ladder or Structured Text language Create Function Block Body in Ladder or Structured Text language Function Block (FB) Nesting Function Blocks (Up to 8 nesting levels) Nesting Tree View (FB Instance Viewer) Convert Ladder program to Function Block Cross Reference Report Cross Reference Pop-up Programming Program check Symbol programming Symbol check Delete Unused Symbols Address automatic allocation Definition/Edit Data Structures CX-Programmer configuration function (Option) Common Keyboard Mapping function Printing function Find/Replace Jump (Set Rung No./Program address/Set Rung with Commented Rung) Expansion advanced instructions (C series) UM area allocation (Set expansion fixed DM) (C200HS/E/G/X, CPM1/CPM1A, CPM2@) Rung wrap function of Ladder (Online) Edit IO comments function Section/Rung manage ROM Writer function Start The CX-Integrator (CS/CJ series) Import old support software data (LSS *1, SSS *2, CVSS *3, CPT *4, SYSWIN data) Import/Export reusable Symbol and Ladder Rung data file Reuse of program C500/C120/C**P backup PLC Backup Tool Operation (Backup/Compare/Restore) Memory Cassette Transfer function/Data Memory to Flash Memory Backup function (CP series) PLC Model conversion Automatic online connection Communications via CJ2 CPU Unit USB port Connection with PLC directly Communications via peripheral port Built-in CPU Unit serial communications Serial Communications Unit Automatic connection via EtherNet/IP Unit Connection with PLC Connection with PLC on Network FINS/UDP connection to EtherNet Unit or EtherNet/IP Unit via EtherNet port FINS/TCP connection to EtherNet Unit or EtherNet/IP Unit via EtherNet port CIP connection to EtherNet/IP Unit FINS connection via Controller Link Board FINS connection via SYSMAC LINK Board FINS connection via SYSNET Board FINS connection via modem Simulator Communication to Simulator Format Memory card Format EM file memory File memory operation Transfer Program file, Data file, and Parameter file between CPU unit and File memory Transfer Symbol Files and Comment Files between CX-Programmer and File Memory Delete file Transfer (Copy) files between storages Function

*1. Ladder Support Software *2. SYSMAC Support Software *3. CV Support Software *4. SYSMAC-CPT
Create, Edit, Check IO Table Verify/Compare IO Tables Delete IO Table Installing a CPS File (CS/CJ series)

Function

Display/Write unit production information, unit text (CS/CJ series) Display unit profile information (CS/CJ series) IO Table Set/Transfer/Compare Parameters for Special I/O Units and CPU Bus Units Save Parameters for SIOU Units and CPU Bus Units (CS/CJ series) Start Special Tool for SIOU Units and CPU Bus Units (CSCJ series) Display each rack's power consumption (CS/CJ series) Display rack width (CJ series) Printing function Display the Dip-switches status of the CPU Unit Transfer program (Program, Rung Comment, Attached Comment, IO Table, PLC Settings, Symbol Table, IO Memory, SIOU Unit Parameters) Transfer program Transferring in Task units Verify program (Program, Function Block Body, SFC action, SFC transition, IO Table, IO Memory, PLC setting) Monitoring Ladder View Monitoring Mnemonic View Monitoring Structured Text program Monitoring program Monitoring SFC program Monitoring SFC action, SFC transition, SFC subchart Displaying Flash-ROM back up status Monitoring Function Block Ladder View Monitoring Function Block ST View Set/Reset Change current value Force Set/Reset Change Timer/Counter setting values Differential monitor/Pause monitor Online edit Online editing of Function Block Display errors and error logs occurring Debug program Data trace, Time chart monitor Save result of data trace or time chart monitor Display cycle time/ task execution time Measure MARK instruction execution time (CV/CVM1 series) Read Protection Using Passwords (CS/CJ/CP series) Read Protection for Specific Tasks (CS/CJ/CP series) System or partial protection (CV/CVM1 series) Write Protection (CPM1/CPM1A, CPM2@) Password Protection of Function Bloks Read/Set clock Debugging by using a Simulator Simulation PLC-PT Integrated Simulation PLC Error Simulator Edit IO memory data Edit/Monitor IO memory (Data memory) Monitor IO memory data (PLC Memory window, Address monitor, Watch window, Ladder window, Mnemonic window) Verify/Transfer IO memory data Find contacts of Force set/reset Edit PLC settings PLC settings Transfer PLC settings Verify PLC settings Printing
Function CX-Programmer project file (.CXP); A file containing the all user programs and parameter data created by CX-Programmer. (The.CXP file is a compressed version of the.CXT file.) CXT file (.CXT); A text-based format supported by CX-Programmer. The.CXT file format is used for file conversions. BAK file (.BAK); A backup copy of the project file. Program file (.OBJ); It indicates full program area files. Program index file (PROGRAMS.IDX); CX-Programmer section names, section comments, and program comments.

File extension

Symbols file (SYMBOLS.SYM); CX-Programmer Global symbol tables, Local symbol tables, settings for automatically allocated areas. Comment file (COMMENTS.CMT); CX-Programmer rung comments and comments. OPT file (.OPT); A file containing the preferences for the project. CXO file (.CXO); A file containing the settings made on the Options dialog and the Watch window. MAC file (.MAC); A file containing the keyboard mapping made on the Keyboard Mapping (Shortcut Keys) dialog.

Appendix

CX-Server file (.CDM); A file containing all of the information about the PLCs, which CX-Server can connect to and the addresses of interest in each PLC which may be accessed. A new CX-Server project can be created from the CX-Net Network Configuration tool. Ladder Section Window; It displays the Ladder program graphically. PLC program instructions can be entered as a graphical representation in Ladder form. Output Window; [Compile]; The Compile tab displays the output produced from program compilation. Selecting an error highlights the source of the problem in the Ladder Diagram. The Compile tab also displays other information, for example, warnings and connection messages. [Find Report]; The Find Report tab displays the output produced from a search of project files for a articular entry. [Transfer]; The Transfer tab view displays the results of file or program loading. Watch Window; It displays the value of the addresses of PLC memory during program execution. Mnemonics View; The Mnemonics view is a formatted editor for programming in mnemonic instructions. ST Editor Window; Displays the ST language can be input directly. SFC Editor Window; Displays an SFC chart or subchart. Symbol Table Window; Displays an editable list of symbol definitions - the names, addresses and comments.

System Requirements

The system requirements are the same as those for the CX-One. (The CX-Programmer is included in the CX-One.) For, details, refer to the FA Integrated Tool Package CX-One Datasheet.

Applicable Units

CX-Programmer can be used with SYSMAC CS/CJ/CP/NSJ-series, C-series, and CVM1/C-series PLCs.

Applicable Models

Series CS1H-CPU63/64/65/66/67 (-V1) CS1G-CPU42/43/44/45 (-V1) CS1H-CPU63H/64H/65H/66H/67H CS1G-CPU42H/43H/44H/45H CS1D-CPU65H/67H CS1D-CPU42S/44S/65S/67S CJ1G-CPU44/45 CJ1H-CPU65H/66H/67H/64H-R/65H-R/66H-R/67H-R CJ1G-CPU42H/43H/44H/45H CJ1M-CPU11/12/13/21/22/23 CJ2H-CPU64-EIP/65-EIP/66-EIP/67-EIP/68-EIP CJ2H-CPU64/65/66/67/68 CJ2M-CPU11/12/13/14/15/31/32/33/34/35 CP1H-XA40DR-A/XA40DT-D/XA40DT1-D/X40DR-A/X40DT-D/X40DT1-D/Y20DT-D CP1L-M60DR-A/M60DR-D/M60DT-A/M60DT-D/M60DT1-D/M40DR-A/M40DR-D/M40DT-A/M40DT-D/M40DT1-D/ M30DR-A/M30DR-D/M30DT-A/M30DT-D/M30DT1-D CP1L-L20DR-A/L20DR-D/L20DT-A/L20DT-D/L20DT1-D/L14DR-A/L14DR-D/L14DT-A/L14DT-D/L14DT1-D/L10DR-A/ L10DR-D/L10DT-A/L10DT-D/L10DT1-D CP1E-E40DR-A/E30DR-A/E20DR-A/E14DR-A/E10DR-A/E10DT-A/E10DT1-A/E10DR-D/E10DT-D/E10DT1-D CP1E-N60DR-A/N60DT-A/N60DT1-A/N60DR-D/N60DT-D/N60DT1-D/N40DR-A/N40DR-D/N40DT-A/N40DT-D/ N40DT1-A/N40DT1-D/N30DR-A/N30DR-D/N30DT-A/N30DT-D/N30DT1-A/N30DT1-D/N20DR-A/N20DR-T/ N20DT-A/N20DT-D/N20DT1-A/N20DT1-D/N14DR-A/N14DT-A/N14DT1-A/N14DR-D/N14DT-D/N14DT1-D CP1E-NA20DR-A/NA20DT-D/NA20DT1-D NSJ5-@-G5D NSJ8-@-G5D NSJ10-@-G5D NSJ12-@-G5D NSJ5-@-M3D NSJ8-@-M3D C1000H-CPU01 C2000H-CPU01 Simplex system C200H-CPU01/02/03/11/21/22/23/31 C200HX-CPU34/44/54/64 C200HG-CPU33/43/53/63 C200HE-CPU11/32/42 C200HX-CPU34-Z/CPU44-Z/CPU54-Z/CPU64-Z/CPU65-Z/CPU85-Z C200HG-CPU33-Z/CPU43-Z/CPU53-Z/CPU63-Z C-series C200HS CPM1A-series CPM2A-series CPM2C-series CPM2@-S@ CQM1 CQM1H-series CV1000 CV2000 CVM1/CV-series CV500 CVM1 CVM1-V2 FQM1 IDSC SRM1 C200HE-CPU11-Z/CPU32-Z/CPU42-Z C200HS-CPU01/03/21/23/31/33 CPM1 (A)-10CDR/20CDR/30CDR/40CDR (-V1) CPM2A-20CD/30CD/40CD/60CD CPM2C-10CD/10C1D/20CD/20C1D CPM2C-S100C/110C CPM2C-S110C-DRT CQM1-CPU11/21/41/42/43/44/45 CQM1H-CPU11/21/51/61 CV1000-CPU01 (-V1) CV2000-CPU01 (-V1) CV500-CPU01 (-V1) CVM1-CPU01/1 (-V1) CVM1-CPU01-V2/CPU11-V2/CPU21-V2 FQM1-CM001/CM002 Coordinator module FQM1-MMA21/MMA22/MMP21/MMP22 Motion control module IDSC-C1DR-A/C1DT-A SRM1-C01/C02 (-V1/-V2) Unit

CS-series

CJ-series CS/CJ/CP-series

CP-series

NSJ-series

NSJ Controller

C1000H C2000H C200H

-series

Related Manuals
Cat.No. W446 W447 W469 W463 W445 Model CXONE-AL@@C-V4/ AL@@D-V4 CXONE-AL@@C-V4/ AL@@D-V4 CXONE-AL@@C-V4/ AL@@D-V4 CXONE-AL@@C-V4/ AL@@D-V4 CXONE-AL@@C-V4/ AL@@D-V4 Manual name CX-Programmer Ver. 9.@ Operation Manual CX-Programmer Ver. 9.@ Operation Manual Function Blocks/Structured Texts CX-Programmer Operation Manual: SFC CX-One Setup Manual CX-Integrator Operation Manual Contents Provides information on how to use the CX-Programmer for all functionality except for function blocks. Describes the function block functions and structured text programming functions that can be used with the CX-Programmer version 9.@. For details on other CX-Programmer functions, refer to the CX-Programmer Ver. 9.@ Operation Manual (Cat. No.W446). Explains how to use the SFC programming functions. For explanations of other shared CX-Programmer functions, refer to the CX-Programmer Operation Manual (W446). Installation and overview of CX-One FA Integrated Tool Package. Describes the operating procedures for the CX-Integrator.
Read and Understand This Catalog
Please read and understand this catalog before purchasing the products. Please consult your OMRON representative if you have any questions or comments.
Warranty and Limitations of Liability

WARRANTY

OMRON's exclusive warranty is that the products are free from defects in materials and workmanship for a period of one year (or other period if specified) from date of sale by OMRON. OMRON MAKES NO WARRANTY OR REPRESENTATION, EXPRESS OR IMPLIED, REGARDING NON-INFRINGEMENT, MERCHANTABILITY, OR FITNESS FOR PARTICULAR PURPOSE OF THE PRODUCTS. ANY BUYER OR USER ACKNOWLEDGES THAT THE BUYER OR USER ALONE HAS DETERMINED THAT THE PRODUCTS WILL SUITABLY MEET THE REQUIREMENTS OF THEIR INTENDED USE. OMRON DISCLAIMS ALL OTHER WARRANTIES, EXPRESS OR IMPLIED.

LIMITATIONS OF LIABILITY

OMRON SHALL NOT BE RESPONSIBLE FOR SPECIAL, INDIRECT, OR CONSEQUENTIAL DAMAGES, LOSS OF PROFITS OR COMMERCIAL LOSS IN ANY WAY CONNECTED WITH THE PRODUCTS, WHETHER SUCH CLAIM IS BASED ON CONTRACT, WARRANTY, NEGLIGENCE, OR STRICT LIABILITY. In no event shall the responsibility of OMRON for any act exceed the individual price of the product on which liability is asserted. IN NO EVENT SHALL OMRON BE RESPONSIBLE FOR WARRANTY, REPAIR, OR OTHER CLAIMS REGARDING THE PRODUCTS UNLESS OMRON'S ANALYSIS CONFIRMS THAT THE PRODUCTS WERE PROPERLY HANDLED, STORED, INSTALLED, AND MAINTAINED AND NOT SUBJECT TO CONTAMINATION, ABUSE, MISUSE, OR INAPPROPRIATE MODIFICATION OR REPAIR.

Application Considerations

SUITABILITY FOR USE

OMRON shall not be responsible for conformity with any standards, codes, or regulations that apply to the combination of products in the customer's application or use of the products. At the customer's request, OMRON will provide applicable third party certification documents identifying ratings and limitations of use that apply to the products. This information by itself is not sufficient for a complete determination of the suitability of the products in combination with the end product, machine, system, or other application or use. The following are some examples of applications for which particular attention must be given. This is not intended to be an exhaustive list of all possible uses of the products, nor is it intended to imply that the uses listed may be suitable for the products: Outdoor use, uses involving potential chemical contamination or electrical interference, or conditions or uses not described in this catalog. Nuclear energy control systems, combustion systems, railroad systems, aviation systems, medical equipment, amusement machines, vehicles, safety equipment, and installations subject to separate industry or government regulations. Systems, machines, and equipment that could present a risk to life or property. Please know and observe all prohibitions of use applicable to the products. NEVER USE THE PRODUCTS FOR AN APPLICATION INVOLVING SERIOUS RISK TO LIFE OR PROPERTY WITHOUT ENSURING THAT THE SYSTEM AS A WHOLE HAS BEEN DESIGNED TO ADDRESS THE RISKS, AND THAT THE OMRON PRODUCTS ARE PROPERLY RATED AND INSTALLED FOR THE INTENDED USE WITHIN THE OVERALL EQUIPMENT OR SYSTEM.

PROGRAMMABLE PRODUCTS

OMRON shall not be responsible for the user's programming of a programmable product, or any consequence thereof.

Disclaimers

CHANGE IN SPECIFICATIONS
Product specifications and accessories may be changed at any time based on improvements and other reasons. It is our practice to change model numbers when published ratings or features are changed, or when significant construction changes are made. However, some specifications of the products may be changed without any notice. When in doubt, special model numbers may be assigned to fix or establish key specifications for your application on your request. Please consult with your OMRON representative at any time to confirm actual specifications of purchased products.

DIMENSIONS AND WEIGHTS

Dimensions and weights are nominal and are not to be used for manufacturing purposes, even when tolerances are shown.

PERFORMANCE DATA

Performance data given in this catalog is provided as a guide for the user in determining suitability and does not constitute a warranty. It may represent the result of OMRONs test conditions, and the users must correlate it to actual application requirements. Actual performance is subject to the OMRON Warranty and Limitations of Liability.

ERRORS AND OMISSIONS

The information in this document has been carefully checked and is believed to be accurate; however, no responsibility is assumed for clerical, typographical, or proofreading errors, or omissions.
2011.4 In the interest of product improvement, specifications are subject to change without notice.
Industrial Automation Company

http://www.ia.omron.com/

OMRON Corporation
(c)Copyright OMRON Corporation 2011 All Right Reserved.