FA Integrated Tool Package CX-One

CX-Programmer Ver.8

CSM_CX-Programmer_Ver8_DS_E_1_1
Improve Productivity for SYSMAC PLCs from Ladder Program Development and Unit Setup to Debugging and Maintenance
Application software to create and debug programs for SYSMAC CS/CJ/CP/NSJ-series, C-series, and CVM1/C-series CPU Units.

Features

Easily Achieve Position Control with Wading Through User Manuals. Complete Support for Synchronous Operation between Units. Easier Connection to PLCs. Batch Backup/Restore with a Computer. Comprehensive Programming Environment. High Program Readability. Time Required for Onsite Startup and Debugging Has Been Significantly Reduced.

Ordering Information

International Standards The standards are abbreviated as follows: U: UL, U1: UL (Class I Division 2 Products for Hazardous Locations), C: CSA, UC: cULus, UC1: cULus (Class I Division 2 Products for Hazardous Locations), CU: cUL, N: NK, L: Lloyd, and CE: EC Directives. Contact your OMRON representative for further details and applicable conditions for these standards.

Support Software

Specifications Product name Number of licenses The CX-One is a package that integrates the Support Software for OMRON PLCs and components. CX-One runs on the following OS. Windows 2000 (Service Pack 3 or higher), XP, or Vista CX-One Ver.3.@ includes CX-Programmer Ver.8.@. For details, refer to the CX-One catalog (Cat. No. R134). Media Model Standards

CD 1 license *1 DVD *2

CXONE-AL01C-V3 CXONE-AL01D-V3
FA Integrated Tool Package CX-One Ver.3.@
CX-Programmer can still be ordered individually in the following model numbers. 1 licenses CX-Programmer Ver.8.@ PLC programming software OS: Windows 2000 (Service Pack 3 or higher), XP, or Vista 3 licenses 10 licenses CD CD CD WS02-CXPC1-V8 WS02-CXPC1-V8L03 WS02-CXPC1-V8L10
*1. Multi licenses are available for the CX-One (3, 10, 30, or 50 licenses). *2. When purchasing the DVD format, verify the computer model and DVD drive specifications before purchasing.
Support Software (Micro PLC Edition)
Specifications Product name Micro PLC Edition CX-Programmer Ver.8.@ PLC Support Software OS: Windows 2000 (Service Pack 3 or higher), XP, or Vista Applicable models: CP1L, CP1H, CPM@@, SRM1 Number of licenses 1 licence Media CD Model Standards

WS02-CXPC2-V8

Connecting Cables for CX-Programmer
Product name Applicable computers Cable length 0.1m Model CS1W-CN118 Standards CE
2m Programming Device Connecting Cables for Peripheral Port 6m

CS1W-CN226

CS1W-CN626

CQM1-CIF02

U, C, N, L, CE
SYSMAC Host Link Cables (RS-232C cables that are compatible with Programmable Controllers)
IBM PC/AT or compatible computers, D-Sub 9pin

XW2Z-200P-V

XW2Z-500P-V

XW2Z-200S-CV

2m Programming Device Connecting Cables for RS-232C Port 5m

XW2Z-200S-V

XW2Z-500S-CV
5m USB-Serial Conversion Cable and PC driver (on a CD-ROM disk) Complies with USB Specification 1.1. IBM PC/AT or compatible computer (USB port)

XW2Z-500S-V

CS1W-CIF31

Product name

Applicable computers

Cable length 0.05m

Standards
Programming Console Connecting Cable

CS1W-CN114

Connecting Cable for peripheral and RS-232C port

CPM2C-CN111

Peripheral interface Unit

C200H-IP007

Connecting Cable for peripheral port

CV500-CIF01

RS-232C Adapter

CPM1-CIF01

Peripheral/RS-232C Adapter Unit

CPM2C-CIF01-V1

U, C, CE
RS-422/RS-232C Adapter Unit

CPM2C-CIF11

Simple Communications Unit

CPM2C-CIF21

Note: For information on confirmations of the CX-Programmer, Connecting Cables, and PLCs, refer to Applicable Peripheral Devices in this datasheet.

Product Configuration

Setup disk : (CD) CD 1 piece in the case Guidance : A4 size, English/Japanese User license agreement/User registration card, English/Japanese

Main Functions

Category
Create Ladder program on Ladder View Create Function Block Call on Ladder View Ladder Create Rung Comment on Ladder View Create Symbol Comments on Ladder View Create Attached Comment on Ladder View Create Ladder program on Mnemonic View Structured Text (ST) SFC Create Program in Structured Text language Create Program in SFC Create SFC Action program in Ladder or Structured Text language Create SFC Transition program in Ladder or Structured Text language Create Function Block Body in Ladder or Structured Text language Function Block (FB) Nesting Function Blocks (Up to 8 nesting levels) Nesting Tree View (FB Instance Viewer) Convert Ladder program to Function Block Cross Reference Report Cross Reference Pop-up Programming Program check Symbol programming Symbol check Delete Unused Symbols Address automatic allocation CX-Programmer configuration function (Option) Keyboard Mapping function Common Printing function Find/Replace Jump (Set Rung No./Program address/Set Rung with Commented Rung) Expansion advanced instructions (C series) UM area allocation (Set expansion fixed DM) (C200HS/E/G/X, CPM1/CPM1A, CPM2@) Rung wrap function of Ladder (Online) Edit IO comments function Section/Rung manage ROM Writer function Start The CX-Integrator (CS/CJ series) Import old support software data (LSS *1, SSS *2, CVSS *3, CPT *4, SYSWIN data) Import/Export reusable Symbol and Ladder Rung data file Reuse of program C500/C120/C**P backup PLC Backup Tool Operation (Backup/Compare/Restore) Memory Cassette Transfer function/Data Memory to Flash Memory Backup function (CP series) PLC Model conversion Connection with PLC directly Communication with PLC directly Auto Online to a PLC Auto Online - EtherNet/IP Node Online Communication with PLC on Network Ethernet Connection Using UDP/IP Connection with PLC Ethernet Connection Using TCP/IP Connection with PLC on Network Connecting Using EtherNet/IP Connecting Using Controller Link Network Service Board Connecting Using SYSMAC LINK Network Service Board Connecting Using SYSMAC NET Network Service Board Communication via modem Simulator Communication to Simulator Format Memory card Format EM file memory File memory operation Transfer Program file, Data file, and Parameter file between CPU unit and File memory Transfer Symbol Files and Comment Files between CX-Programmer and File Memory Delete file Transfer (Copy) files between storages Function

*1. Ladder Support Software *2. SYSMAC Support Software *3. CV Support Software *4. SYSMAC-CPT
Create, Edit, Check IO Table Verify/Compare IO Tables Delete IO Table Installing a CPS File (CS/CJ series)

Function

Display/Write unit production information, unit text (CS/CJ series) Display unit profile information (CS/CJ series) IO Table Set/Transfer/Compare Parameters for Special I/O Units and CPU Bus Units Save Parameters for SIOU Units and CPU Bus Units (CS/CJ series) Start Special Tool for SIOU Units and CPU Bus Units (CSCJ series) Display each rack's power consumption (CS/CJ series) Display rack width (CJ series) Printing function Display the Dip-switches status of the CPU Unit Transfer program (Program, Rung Comment, Attached Comment, IO Table, PLC Settings, Symbol Table, IO Memory, SIOU Unit Parameters) Transfer program Transfering in Task units Verify program (Program, Function Block Body, SFC action, SFC transition, IO Table, IO Memory, PLC setting) Monitoring Ladder View Monitoring Mnemonic View Monitoring Structured Text program Monitoring program Monitoring SFC program Monitoring SFC action, SFC transition, SFC subchart Displaying Flash-ROM back up status Monitoring Function Block Ladder View Monitoring Function Block ST View Set/Reset Change current value Force Set/Reset Change Timer/Counter setting values Differential monitor/Pause monitor Online edit Online editing of Function Block Display errors and error logs occurring Debug program Data trace, Time chart monitor Save result of data trace or time chart monitor Display cycle time/ task execution time Measure MARK instruction execution time (CV/CVM1 series) Read Protection Using Passwords (CS/CJ/CP series) Read Protection for Specific Tasks (CS/CJ/CP series) System or partial protection (CV/CVM1 series) Write Protection (CPM1/CPM1A, CPM2@) Password Protection of Function Bloks Read/Set clock Debugging by using a Simulator Simulation PLC-PT Integrated Simulation PLC Error Simulator Edit IO memory data Edit/Monitor IO memory (Data memory) Monitor IO memory data (PLC Memory window, Address monitor, Watch window, Ladder window, Mnemonic window) Verify/Transfer IO memory data Find contacts of Force set/reset Edit PLC settings PLC settings Transfer PLC settings Verify PLC settings Printing
Function CX-Programmer project file (.CXP); A file containing the all user programs and parameter data created by CX-Programmer. (The.CXP file is a compressed version of the.CXT file.) CXT file (.CXT); A text-based format supported by CX-Programmer. The.CXT file format is used for file conversions. BAK file (.BAK); A backup copy of the project file. Program file (.OBJ); It indicates full program area files. Program index file (PROGRAMS.IDX); CX-Programmer section names, section comments, and program comments.

File extension

Symbols file (SYMBOLS.SYM); CX-Programmer Global symbol tables, Local symbol tables, settings for automatically allocated areas. Comment file (COMMENTS.CMT); CX-Programmer rung comments and comments. OPT file (.OPT); A file containing the preferences for the project. CXO file (.CXO); A file containing the settings made on the Options dialog and the Watch window. MAC file (.MAC); A file containing the keyboard mapping made on the Keyboard Mapping (Shortcut Keys) dialog.

Appendix

CX-Server file (.CDM); A file containing all of the information about the PLCs, which CX-Server can connect to and the addresses of interest in each PLC which may be accessed. A new CX-Server project can be created from the CX-Net Network Configuration tool. Ladder Section Window; It displays the Ladder program graphically. PLC program instructions can be entered as a graphical representation in Ladder form. Output Window; [Compile]; The Compile tab displays the output produced from program compilation. Selecting an error highlights the source of the problem in the Ladder Diagram. The Compile tab also displays other information, for example, warnings and connection messages. [Find Report]; The Find Report tab displays the output produced from a search of project files for a articular entry. [Transfer]; The Transfer tab view displays the results of file or program loading. Watch Window; It displays the value of the addresses of PLC memory during program execution. Mnemonics View; The Mnemonics view is a formatted editor for programming in mnemonic instructions. ST Editor Window; Displays the ST language can be input directly. SFC Editor Window; Displays an SFC chart or subchart. Symbol Table Window; Displays an editable list of symbol definitions - the names, addresses and comments.

System Requirements

Item Operating system (OS) *1 Japanese or English system Computer Memory Hard disk Display Disk drive Communications ports Other Requirement Microsoft Windows 2000 (Service Pack 3 or higher) or XP IBM PC/AT or compatible with a Pentium II 333 MHz or faster processor (Pentium III 1 GHz or faster recommended.) 256 MB minimum *2 Microsoft Windows Vista *4 IBM PC/AT or compatible with a processor recommended by Microsoft. (1 GHz or faster recommended) 512 MB min. required.1 GB min. recommended.
Approx. 2.5 GB or more available space is required to install the complete CX-One package. SVGA (800 600) or better high-resolution display with 256 colors min. CD-ROM drive or DVD-ROM drive RS-232C port, USB port, or Ethernet port *3 Internet access is required for online user registration, including a modem or other hardware connection method.
*1. CX-One Operating System Precaution System requirements and hard disk space may vary with the system environment. *2. The amount of memory required varies with the Support Software used in CX-One for the following Support Software. Refer to user documentation for individual Support Software for details. CX-Programmer, CX-Designer, CX-Thermo, CX-Simulator, CX-Protocol, CX-Motion, CX-Drive, CX-Process Tool, and Faceplate Auto-Builder for NS *3. An RS-232C port is required to connect the Support Software in CX-One to a PLC. If the computer provides only a USB port, use a CS1WCIF31 USB-to-RS-232C Conversion Cable. For connecting to the CP Series, however, an over-the-counter USB cable (type A-B) can be used. For the CX-Drive, the CS1W-CIF31 USB-to-RS-232C Conversion Cable cannot be used to connect a USB port on the computer to the 3G3MV. Use the recommended commercially available USB-serial conversion cable. For details, refer to the CX-Drive Programmable Controller Operation Manual (Cat. No. W453). *4. The following restrictions apply when CX-One is used with Microsoft Windows Vista. 1) Some Help files cannot be accessed. The Help files can be accessed if the Help program distributed by Microsoft for Windows Vista (WinHlp32.exe) is installed. Refer to the Microsoft homepage listed below or contact Microsoft for details on installing the file. (The download page is automatically displayed if the Help files are opened while the user is connected to the Internet.) http://support.microsoft.com/kb/917607/en-us 2) The following restrictions apply to some application operations.

Application CX-Designer CX-Process Restriction If a new Windows Vista font (e.g., Meiryo) is used in a project, the font size on labels may be bigger and protrude from the components if the project is transferred from CX-Designer running on a Windows XP or earlier OS to the NS/NSJ. When File Active Serial Port Driver is selected, a message stating that FinsGateway initialization failed may be displayed and the serial driver may not be initialized.

Applicable PLC Series

CX-Programmer can be used with SYSMAC CS/CJ/CP/NSJ-series, C-series, and CVM1/C-series PLCs.

Applicable CPU Units

Series CS1H-CPU63/64/65/66/67 (-V1) CS1G-CPU42/43/44/45 (-V1) CS1H-CPU63H/64H/65H/66H/67H CS1G-CPU42H/43H/44H/45H CS1D-CPU65H/67H CS1D-CPU42S/44S/65S/67S CJ1G-CPU44/45 CJ1H-CPU65H/66H/67H/64H-R/65H-R/66H-R/67H-R CJ1G-CPU42H/43H/44H/45H CJ1M-CPU11/12/13/21/22/23 CJ2H-CPU64-EIP/65-EIP/66-EIP/67-EIP/68-EIP CJ2H-CPU64/65/66/67/68 CP1H-XA40DR-A/XA40DT-D/XA40DT1-D/X40DR-A/X40DT-D/X40DT1-D/Y20DT-D CP1L-M40DR-A/M40DR-D/M40DT-D/M40DT1-D/M30DR-A/M30DR-D/M30DT-D/M30DT1-D/M60DR-A/M60DR-D /M60DT-D/M60DT1-D CP1L-L20DR-A/L20DR-D/L20DT-D/L20DT1-D/L14DR-A/L14DR-D/L14DT-D/L14DT1-D/L10DR-A/L10DR-D/L10DT-D /L10DT1-D NSJ5-@-G5D NSJ8-@-G5D NSJ10-@-G5D NSJ12-@-G5D NSJ5-@-M3D NSJ8-@-M3D C1000H-CPU01 C2000H-CPU01 Simplex system C200H-CPU01/02/03/11/21/22/23/31 C200HX-CPU34/44/54/64 C200HG-CPU33/43/53/63 C200HE-CPU11/32/42 C200HX-CPU34-Z/CPU44-Z/CPU54-Z/CPU64-Z/CPU65-Z/CPU85-Z C200HG-CPU33-Z/CPU43-Z/CPU53-Z/CPU63-Z C200HE-CPU11-Z/CPU32-Z/CPU42-Z C200HS-CPU01/03/21/23/31/33 CPM1 (A)-10CDR/20CDR/30CDR/40CDR (-V1) CPM2A-20CD/30CD/40CD/60CD CPM2C-10CD/10C1D/20CD/20C1D CPM2C-S100C/110C CPM2C-S110C-DRT CQM1-CPU11/21/41/42/43/44/45 CQM1H-CPU11/21/51/61 CV1000-CPU01 (-V1) CV2000-CPU01 (-V1) CV500-CPU01 (-V1) CVM1-CPU01/1 (-V1) CVM1-CPU01-V2/CPU11-V2/CPU21-V2 FQM1-CM001/CM002 Coordinator module FQM1-MMA21/MMA22/MMP21/MMP22 Motion control module IDSC-C1DR-A/C1DT-A SRM1-C01/C02 (-V1/-V2) CPU Unit
C1000H C2000H C200H C200HX C200HG C200HE C200HX-Z C200HG-Z C200HE-Z C200HS CPM1/CPM1A CPM2@ CPM2@-S@ CQM1 CQM1H CV1000 CV2000 CV500 CVM1 CVM1-V2 FQM1 IDSC SRM1

Communication Method to Connect Applicable PLC and PC

Via USB

PC PLC USB A plug (female) USB B plug (male)

Via RS-232C

PC PLC PC built-in RS-232C port CPU unit built-in peripheral port CPU unit built-in RS-232C port Serial communication unil/board RS-232C port

Via Ethernet

PC PLC Ethernet port, Ethernet Card Ethernet unit, EtherNet/IP Unit
Via Network Support Board

Controller Link

PC PLC Controller Link board Controller Link unit

SYSMAC LINK

PC PLC SYSMAC LINK board SYSMAC LINK unit

SYSNET

PC PLC SYSNET board SYSNET unit
Applicable Peripheral Devices
Connection Types for PLC and PC (CX-Programmer)
PLC Port Connection Types Connecting Cables PC port (CX-Programmer)

Conversion Cables (PLC)

Conversion Cables (PC)

USB B plug (male)

Commercially available USB cable (A plug connector (male) - B plug connector (female)) XW2Z-@@@

CS1W-CIF31 *

USB A plug (female)

D-sub, 9-pin (female)

XW2Z-@@@P-V C D-sub, 25-pin (female)
CS1W-CIF31 * USB A plug (female)
CQM1-CIF02 C Series peripheral CPM1-CIF01 D CPM1, CPM1A, CPM2A, SRM1 XW2Z-@@@S-V/S-CV CS1W-CIF31 * USB A plug (female)
CV500-CIF01 E CV Series peripheral

CS1W-CN226/ CS1W-CN626

CS/CJ/CP/CQM1H peripheral

CS1W-CN118

XW2Z-@@@S-V/S-CV
* The CS1W-CIF31 is not required if the connector on the computer running the CX-Programmer has a D-sub, 9-pin male connector. Note: 1. PC (Personal Computer) : IBM PC/AT or compatible computer 2. A Host Link Unit (e.g., C200H-LK201-V1) or Peripheral Interface Unit (C200H-IP007) is required for some PLCs. Refer to the tables for individual PLCs for details.
PLC Port Connection Types Connecting Cables

PC port (CX-Programmer)

CS1W-CN114 CQM1-CIF02 CS1W-CN114

+CPM2C-CIF01-V1

CS1W-CIF31 * G CPM2C CS1W-CN118 USB A plug (female)

XW2Z-@@@ CPM2C-CIF01-V1

Connecting Cables for PLCs and PCs (CX-Programmer)
Conversion Cables for USB-D-Sub 9-pin
Unit Unit port RS-232C PC/AT D-sub, 9-pin (female) compatible Computer PC port Network Type (Serial Communications Mode) Model CS1W-CIF31 Cable length 0.5m Connection Types

USB A plug Depends on the Unit's connector (female) spcifications.
Connecting Cables for CJ2
Unit Unit port USB B plug connector (male) CPU Unit Built-in RS-232C port D-sub, 9-pin (female) Computer PC port Network Type (Serial Communications Mode) Model Commercially available USB cable (A plug connector (male) - B plug connector (female)) XW2Z-500S-CV XW2Z-200S-CV Cable length Connection Types

PC/AT compatible

USB A plug USB or connector (female) Toolbu (USB port)

5m maximum

D-sub, 9-pin (male) Host Link
Connecting Cables for CS1/CJ1
Unit Unit port Computer PC port Network Type (Serial Communications Mode) Model CS1W-CN226 CS1W-CN626 Peripheral bus or Host Link Built-in peripheral port CPU PC/AT compatible D-sub, 9-pin (male) Host Link Host Link with a baud rate of 19.2 kbps or less Peripheral bus or Host Link Host Link CS1W-CN118 +XW2Z-200S-CV CS1W-CN118 +XW2Z-500S-CV CS1W-CN118 +XW2Z-200S-V CS1W-CN118 +XW2Z-500S-V CS1W-CN114 +CQM1-CIF02 XW2Z-200S-CV XW2Z-500S-CV XW2Z-200S-V XW2Z-500S-V Cable length 2m 6m 0.1m+2m 0.1m+5m F 0.1m+2m 0.1m+5m 0.05m+3.3m 2m 5m 2m 5m B Connection Types
Built-in RS-232C port D-sub, 9-pin (female)
Connecting Cables for CP1H/CP1L
Unit Unit port USB B plug connector (male) CPU RS-232C port (D-sub 9-pin female) on Option Board D-sub, 9-pin (female) PC/AT compatible D-sub, 9-pin (male) Host Link Computer PC port USB A plug connector (male) Network Type (Serial Communications Mode) Model Commercially available USB cable (A plug connector (male) - B plug connector (female)) XW2Z-200S-CV XW2Z-500S-CV XW2Z-200S-V XW2Z-500S-V Cable length Connection Types
Peripheral bus or Host Link

2m 5m 2m 5m B

* An Option Board cannot be used with a CP1L CPU Unit with 10 Points.
Connecting Cables for NSJ
Unit Unit port USB B plug connector (male) CPU Built-in RS-232C port D-sub, 9-pin (female) PC/AT compatible D-sub, 9-pin (male) Host Link Computer PC port USB A plug connector (male) Network Type (Serial Communications Mode) Model Commercially available USB cable (A plug connector (male) - B plug connector (female)) XW2Z-200S-CV XW2Z-500S-CV XW2Z-200S-V XW2Z-500S-V Cable length Connection Types

Connecting Cables for C200HS
Unit Unit port Built-in peripheral port CPU Unit Built-in RS-232C port D-sub, 9-pin (female) PC/AT (CPU 21/23/31/33 compatible only) Built-in RS-232C port D-sub, 25-pin (female) Computer PC port Network Type (Serial Communications Mode) Peripheral bus or Host Link Model CQM1-CIF02 XW2Z-200S-CV XW2Z-500S-CV D-sub, 9-pin (male) Host Link XW2Z-200S-V XW2Z-500S-V XW2Z-200P-V XW2Z-500P-V Cable length 3.3m 2m 5m 2m 5m 2m 5m C B Connection Types D
Host Link Unit C200HLK201-V1
Connecting Cables for C200HX/HG/HE
Unit Unit port Built-in peripheral port CPU Computer PC port Network Type (Serial Communications Mode) Peripheral bus * or Host Link Model CQM1-CIF02 XW2Z-200S-CV Built-in RS-232C port PC/AT D-sub, 9-pin (female) compatible Built-in RS-232C port D-sub, 25-pin (female) XW2Z-500S-CV D-sub, 9-pin (male) Host Link XW2Z-200S-V XW2Z-500S-V XW2Z-200P-V * XW2Z-500P-V * Cable length 3.3m 2m 5m 2m 5m 2m 5m C B Connection Types D
Host Link Unit C200H-LK201-V1
* These Cables cannot be used for Programming Devices, such as the CX-Programmer, for the C200H-LK201-V1 Host Link Unit on a C200HX/ HG/HE-Z PLC.
Connecting Cables for CQM1H
Unit Unit port Computer PC port Network Type (Serial Communications Mode) Model CS1W-CN226 CS1W-CN626 CS1W-CN114 +CQM1-CIF02 Built-in peripheral port CPU PC/AT compatible D-sub, 9-pin (male) Peripheral bus or Host Link CS1W-CN118 +XW2Z-200S-CV CS1W-CN118 +XW2Z-500S-CV CS1W-CN118 +XW2Z-200S-V CS1W-CN118 +XW2Z-500S-V XW2Z-200S-CV Built-in RS-232C port D-sub, 9-pin (female) Host Link XW2Z-500S-CV XW2Z-200S-V XW2Z-500S-V Cable length 2m 6m 0.05m+3.3m 0.1m+2m F 0.1m+5m 0.1m+2m 0.1m+5m 2m 5m 2m 5m B Connection Types
Connecting Cables for CQM1
Unit Unit port Built-in peripheral port Computer PC port Network Type (Serial Communications Mode) Peripheral bus or Host Link D-sub, 9-pin (male) Host Link Model CQM1-CIF02 XW2Z-200S-CV XW2Z-500S-CV XW2Z-200S-V XW2Z-500S-V Cable length 3.3m 2m 5m 2m 5m B Connection Types D
Built-in RS-232C port PC/AT D-sub, 9-pin (female) compatible (CPU42/43/44/63/64/ 65/85 only)
Connecting Cables for CPM1, CPM1A and CPM2A
Unit Unit port Computer PC port Network Type (Serial Communications Mode) Peripheral bus or Host Link CPU Unit Built-in peripheral port PC/AT compatible D-sub, 9-pin (male) Host Link Model CPM1-CIF01 +XW2Z-200S-CV CPM1-CIF01 +XW2Z-500S-CV CPM1-CIF01 +XW2Z-200S-V CPM1-CIF01 +XW2Z-500S-V Cable length 2m 5m D 2m 5m Connection Types
* CPM2A CPU Units that have a 9 as the fourth digit of the lot number (4 or 5 digits) do not support Toolbus connections. They do support Host Link connections.
Connecting Cables for SRM1
Unit Unit port Computer PC port Network Type (Serial Communications Mode) Peripheral bus or Host Link Built-in peripheral port CPU Unit PC/AT compatible D-sub, 9-pin (male) Host Link Built-in RS-232C port D-sub, 9-pin (female) (SRM1-C01 only) Model CPM1-CIF01 +XW2Z-200S-CV CPM1-CIF01 +XW2Z-500S-CV CPM1-CIF01 +XW2Z-200S-V CPM1-CIF01 +XW2Z-500S-V XW2Z-200S-CV XW2Z-500S-CV XW2Z-200S-V XW2Z-500S-V Cable length 2m 5m D 2m 5m 2m 5m 2m 5m B Connection Types

Connecting Cables for CPM2C
Unit Unit port Computer PC port Network Type (Serial Communications Mode) Model CS1W-CN226 *2 CS1W-CN626 *2 CS1W-CN114 +CQM1-CIF02 CPM2C-CIF01-V1 +CS1W-CN114 +CQM1-CIF02 CPM2C-CN111 (Peripheral port) +CQM1-CIF02 CS1W-CN118 +XW2Z-200S-CV CS1W-CN118 +XW2Z-500S-CV CPM2C-CN111 (RS-232C port) +XW2Z-200S-CV CPM2C-CN111 (RS-232C port) +XW2Z-500S-CV CPM2C-CIF01-V1 +XW2Z-200S-CV CPM2C-CIF01-V1 +XW2Z-500S-CV CPM2C-CIF01-V1 +CS1W-CN118 +XW2Z-200S-CV CPU PC/AT compatible D-sub, 9-pin (male) CPM2C-CIF01-V1 +CS1W-CN118 +XW2Z-500S-CV CS1W-CN118 +XW2Z-200S-V Communications port (as an RS-232C port) CS1W-CN118 +XW2Z-500S-V CS1W-CN111 (RS-232C port) +XW2Z-200S-V CS1W-CN111 (RS-232C port) +XW2Z-500S-V CPM2C-CIF01-V1 +XW2Z-200S-V CPM2C-CIF01-V1 +XW2Z-500S-V CPM2C-CIF01-V1 +CS1W-CN118 +XW2Z-200S-V CPM2C-CIF01-V1 +CS1W-CN118 +XW2Z-500S-V CPM2C-CIF11 +XW2Z-200S-V CPM2C-CIF11 +XW2Z-500S-V CPM2C-CIF21 +XW2Z-200S-V CPM2C-CIF21 +XW2Z-500S-V Cable length 2m 6m 0.05m+3.3m Adapter+ 0.05m + 3.3m 0.1m+3.3m 0.1m+2m 0.1m+5m 0.1m+2m Connection Types
Communications port (as a peripheral port)
Peripheral bus *1 or Host Link
0.1m+5m Adapter+2m Adapter+5m Adapter 0.1m+2m Adapter 0.1m+5m 0.1m+2m 0.1m+5m 0.1m+2m

Host Link

0.1m+5m Adapter+2m Adapter+5m Adapter+ 0.1m+2m Adapter+ 0.1m+5m Adapter+2m Adapter+5m Adapter+2m Adapter+5m
*1. CPM2C CPU Units that have a 9 as the fourth digit of the lot number (4 or 5 digits) and that were manufactured in 1999 do not support Toolbus connections. They do support Host Link connections. *2. Only Host Link (SYSMAC WAY) connections are possible. Toolbus cannot be used. Note: Refer to the CPM2C Operation Manual (Cat. No. W340) for details.
Connecting Cables for C1000H, C2000H, C200H
Unit Unit port CPU Unit Host Link Unit C1000H, C2000H: C500-LK203 C500-LK201-V1 (3G2A5-LK201-V1) C120-LK201-V1 (3G2A6-LK201-EV1) C200H: C200H-LK201-V1 C120-LK201-V1 (3G2A6-LK201-EV1) Built-in peripheral port Computer PC port Network Type (Serial Communications Mode) Model C200H-IP007 +CQM1-CIF02 XW2Z-200P-V PC/AT Built-in RS-232C port compatible D-sub, 25-pin (female) D-sub, 9-pin (male) Host Link C XW2Z-500P-V 5m Cable length 3.3m Connection Types D
Connecting Cables for CVM1/CV
Unit Unit port Built-in peripheral port CPU Unit Built-in RS-232C port D-sub, 9-pin (female) Built-in RS-232C port PC/AT D-sub, 25-pin compatible (female) Computer PC port Network Type (Serial Communications Mode) Model CV500-CIF01 XW2Z-200S-V * XW2Z-500S-V * XW2Z-200P-V D-sub, 9-pin (male) Host Link XW2Z-500P-V XW2Z-200S-V Built-in RS-232C port D-sub, 9-pin (female) XW2Z-500S-V 5m 2m B 5m Cable length 6m 2m 5m 2m C Connection Types E B

Host Link Unit CV500-LK201 (for full duplex communication on port 1) Host Link Unit CV500-LK201 (for full duplex communication on port 2)
* The XW2Z-200S-CV and XW2Z-500S-CV cannot be used.
Connecting Cables for C500
Unit Unit port CPU Unit *1 Host Link Unit *2 C500-LK203 C500-LK201-V1 (3G2A5-LK201-EV1) C120-LK201-V1 (3G2A6-LK201-EV1) Built-in peripheral port PC/AT Built-in RS-232C port compatible D-sub, 25-pin (female) D-sub, 9-pin (male) Host Link C XW2Z-500P-V 5m Computer PC port Network Type (Serial Communications Mode) Model C200H-IP007 +CQM1-CIF02 XW2Z-200P-V Cable length 3.3m 2m Connection Types D
*1. Production of the CPU Units was discontinued in March 2004. *2. Production of the C500-LK203, C500-LK201-V1 (3G2A5-LK201-EV1), and C120-LK201-V1 (3G2A6-LK201-EV1) was discontinued in March 2006. (There is no recommended substitute product.)
Connecting Cables for C120
Unit Unit port CPU Unit *1 Host Link Unit *2 C120-LK201-V1 (3G2A6-LK201-EV1) Built-in peripheral port Computer PC port Network Type (Serial Communications Mode) Model C200H-IP007 +CQM1-CIF02 D-sub, 9-pin (male) Host Link XW2Z-200P-V XW2Z-500P-V Cable length 3.3m 2m 5m C Connection Types D
PC/AT Built-in RS-232C port compatible D-sub, 25-pin (female)
*1. Production of the CPU Units was discontinued in March 2003. *2. Production of the C120-LK201-V1 was discontinued in March 2006. (There is no recommended substitute product.)
Connecting Cables for C20P/C28P/C40P/C60P*1, C20K/C28K/C40K/C60K*2
Unit Unit port Host Link Unit *3 *4 C20-LK201-V1 (3G2C7-LK201-EV1) Built-in RS-232C port PC/AT D-sub, 25-pin compatible (female) Computer PC port Network Type (Serial Communications Mode) Model XW2Z-200P-V D-sub, 9-pin (male) Host Link XW2Z-500P-V Cable length 2m 5m C Connection Types
*1. Production of the C20P, C28P, C40P, and C60P CPU Units was discontinued in March 2002. *2. Production of the C20K, C28K, C40K, and C60K CPU Units was discontinued in March 2002. *3. For connection to C@@P PLCs, a Host Link Unit is also required in addition to a Connecting Cable. *4. Production of the C20-LK201-V1 (3G2C7-LK201-EV1) was discontinued in March 2006. (There is no recommended substitute product.)

Related Manuals

Cat.No. W446 W447 W469 W463 W445 Model WS02-CXPC@-V8 WS02-CXPC@-V8 WS02-CXPC@-V8 CXONE-AL@@C-V3/ AL@@D-V3 CXONE-AL@@C-V3/ AL@@D-V3 Manual name CX-Programmer Ver.8.@ Operation Manual CX-Programmer Ver. 8.@ Operation Manual Function Blocks/Structured Texts CX-Programmer Operation Manual: SFC CX-One Setup Manual CX-Integrator Operation Manual Contents Provides information on how to use the CX-Programmer for all functionality except for function blocks. Describes the function block functions and structured text programming functions that can be used with the CX-Programmer version 8.@. For details on other CX-Programmer functions, refer to the CX-Programmer Ver. 8.@ Operation Manual (Cat. No.W446). Explains how to use the SFC programming functions. For explanations of other shared CX-Programmer functions, refer to the CX-Programmer Operation Manual (W446). Installation and overview of CX-One FA Integrated Tool Package. Describes the operating procedures for the CX-Integrator.

Read and Understand This Catalog
Please read and understand this catalog before purchasing the products. Please consult your OMRON representative if you have any questions or comments.
Warranty and Limitations of Liability

WARRANTY

OMRON's exclusive warranty is that the products are free from defects in materials and workmanship for a period of one year (or other period if specified) from date of sale by OMRON. OMRON MAKES NO WARRANTY OR REPRESENTATION, EXPRESS OR IMPLIED, REGARDING NON-INFRINGEMENT, MERCHANTABILITY, OR FITNESS FOR PARTICULAR PURPOSE OF THE PRODUCTS. ANY BUYER OR USER ACKNOWLEDGES THAT THE BUYER OR USER ALONE HAS DETERMINED THAT THE PRODUCTS WILL SUITABLY MEET THE REQUIREMENTS OF THEIR INTENDED USE. OMRON DISCLAIMS ALL OTHER WARRANTIES, EXPRESS OR IMPLIED.

LIMITATIONS OF LIABILITY

OMRON SHALL NOT BE RESPONSIBLE FOR SPECIAL, INDIRECT, OR CONSEQUENTIAL DAMAGES, LOSS OF PROFITS OR COMMERCIAL LOSS IN ANY WAY CONNECTED WITH THE PRODUCTS, WHETHER SUCH CLAIM IS BASED ON CONTRACT, WARRANTY, NEGLIGENCE, OR STRICT LIABILITY. In no event shall the responsibility of OMRON for any act exceed the individual price of the product on which liability is asserted. IN NO EVENT SHALL OMRON BE RESPONSIBLE FOR WARRANTY, REPAIR, OR OTHER CLAIMS REGARDING THE PRODUCTS UNLESS OMRON'S ANALYSIS CONFIRMS THAT THE PRODUCTS WERE PROPERLY HANDLED, STORED, INSTALLED, AND MAINTAINED AND NOT SUBJECT TO CONTAMINATION, ABUSE, MISUSE, OR INAPPROPRIATE MODIFICATION OR REPAIR.
Application Considerations

SUITABILITY FOR USE

OMRON shall not be responsible for conformity with any standards, codes, or regulations that apply to the combination of products in the customer's application or use of the products. At the customer's request, OMRON will provide applicable third party certification documents identifying ratings and limitations of use that apply to the products. This information by itself is not sufficient for a complete determination of the suitability of the products in combination with the end product, machine, system, or other application or use. The following are some examples of applications for which particular attention must be given. This is not intended to be an exhaustive list of all possible uses of the products, nor is it intended to imply that the uses listed may be suitable for the products: Outdoor use, uses involving potential chemical contamination or electrical interference, or conditions or uses not described in this catalog. Nuclear energy control systems, combustion systems, railroad systems, aviation systems, medical equipment, amusement machines, vehicles, safety equipment, and installations subject to separate industry or government regulations. Systems, machines, and equipment that could present a risk to life or property. Please know and observe all prohibitions of use applicable to the products. NEVER USE THE PRODUCTS FOR AN APPLICATION INVOLVING SERIOUS RISK TO LIFE OR PROPERTY WITHOUT ENSURING THAT THE SYSTEM AS A WHOLE HAS BEEN DESIGNED TO ADDRESS THE RISKS, AND THAT THE OMRON PRODUCTS ARE PROPERLY RATED AND INSTALLED FOR THE INTENDED USE WITHIN THE OVERALL EQUIPMENT OR SYSTEM.

PROGRAMMABLE PRODUCTS

OMRON shall not be responsible for the user's programming of a programmable product, or any consequence thereof.

Disclaimers

CHANGE IN SPECIFICATIONS
Product specifications and accessories may be changed at any time based on improvements and other reasons. It is our practice to change model numbers when published ratings or features are changed, or when significant construction changes are made. However, some specifications of the products may be changed without any notice. When in doubt, special model numbers may be assigned to fix or establish key specifications for your application on your request. Please consult with your OMRON representative at any time to confirm actual specifications of purchased products.

DIMENSIONS AND WEIGHTS

Dimensions and weights are nominal and are not to be used for manufacturing purposes, even when tolerances are shown.

PERFORMANCE DATA

Performance data given in this catalog is provided as a guide for the user in determining suitability and does not constitute a warranty. It may represent the result of OMRONs test conditions, and the users must correlate it to actual application requirements. Actual performance is subject to the OMRON Warranty and Limitations of Liability.

ERRORS AND OMISSIONS

The information in this document has been carefully checked and is believed to be accurate; however, no responsibility is assumed for clerical, typographical, or proofreading errors, or omissions.
2009.5 In the interest of product improvement, specifications are subject to change without notice.
Industrial Automation Company

http://www.ia.omron.com/

OMRON Corporation
(c)Copyright OMRON Corporation 2009 All Right Reserved.

FA Integrated Tool Package CX-One

CX-Programmer Ver.9

CSM_CX-Programmer_DS_E_5_1
Improve Productivity for SYSMAC PLCs from Ladder Program Development and Unit Setup to Debugging and Maintenance
Application software to create and debug programs for SYSMAC CS/CJ/CP/NSJ-series, C-series, and CVM1/C-series CPU Units.
Note: The CX-Programmer is included in the CX-One FA Integrated Tool Package.

Features

Easily Achieve Position Control with Wading Through User Manuals. Complete Support for Synchronous Operation between Units. Easier Connection to PLCs. Batch Backup/Restore with a Computer. Comprehensive Programming Environment. High Program Readability. Time Required for Onsite Startup and Debugging Has Been Significantly Reduced.

Ordering Information

Support Software
Specifications Product name The CX-One is a package that integrates the Support Software for OMRON PLCs and components. FA Integrated Tool Package CX-One Ver.4.@ CX-One runs on the following OS. Windows XP (Service Pack 3 or higher), Vista or 7 Note: Expect for Windows XP 64-bit version. CX-One Ver.4.@ includes CX-Programmer Ver.9.@. For details, refer to the CX-One catalog (Cat. No. R134). CX-One Lite is a subset of the complete CX-One package that provides only the Support Software required for micro PLC applications. FA Integrated Tool Package CX-One Lite Ver.4.@ CX-One Lite runs on the following OS. Windows XP (Service Pack 3 or higher), Vista or 7 Note: Expect for Windows XP 64-bit version. CX-One Lite Ver.4.@ includes Micro PLC Edition CX-Programmer Ver.9.@. 1 license CD CXONE-LT01C-Vlicense *1 DVD *2 CXONE-AL01D-V4 Number of licenses Media Model Standards
Note: The CX-One and CX-One Lite cannot be simultaneously installed on the same computer. *1. Multi licenses are available for the CX-One (3, 10, 30, or 50 licenses). *2. The CX-One is also available on CD (CXONE-AL@@C-V4).

Product Configuration

Setup disk : (CD) CD 4 pieces in the case (DVD) DVD 1 piece in the case * Guidance : A4 size, English/Japanese Product Registration Guide, Japanese User license agreement/User registration card, English/Japanese * CX-One Lite has the CD version only.

Main Functions

Category
Create Ladder program on Ladder View Create Function Block Call on Ladder View Create Rung Comment on Ladder View Ladder Create Symbol Comments on Ladder View Create Attached Comment on Ladder View Create Ladder program on Mnemonic View Create Ladder program by smart Input Mode Structured Text (ST) SFC Create Program in Structured Text language Create Program in SFC Create SFC Action program in Ladder or Structured Text language Create SFC Transition program in Ladder or Structured Text language Create Function Block Body in Ladder or Structured Text language Function Block (FB) Nesting Function Blocks (Up to 8 nesting levels) Nesting Tree View (FB Instance Viewer) Convert Ladder program to Function Block Cross Reference Report Cross Reference Pop-up Programming Program check Symbol programming Symbol check Delete Unused Symbols Address automatic allocation Definition/Edit Data Structures CX-Programmer configuration function (Option) Common Keyboard Mapping function Printing function Find/Replace Jump (Set Rung No./Program address/Set Rung with Commented Rung) Expansion advanced instructions (C series) UM area allocation (Set expansion fixed DM) (C200HS/E/G/X, CPM1/CPM1A, CPM2@) Rung wrap function of Ladder (Online) Edit IO comments function Section/Rung manage ROM Writer function Start The CX-Integrator (CS/CJ series) Import old support software data (LSS *1, SSS *2, CVSS *3, CPT *4, SYSWIN data) Import/Export reusable Symbol and Ladder Rung data file Reuse of program C500/C120/C**P backup PLC Backup Tool Operation (Backup/Compare/Restore) Memory Cassette Transfer function/Data Memory to Flash Memory Backup function (CP series) PLC Model conversion Automatic online connection Communications via CJ2 CPU Unit USB port Connection with PLC directly Communications via peripheral port Built-in CPU Unit serial communications Serial Communications Unit Automatic connection via EtherNet/IP Unit Connection with PLC Connection with PLC on Network FINS/UDP connection to EtherNet Unit or EtherNet/IP Unit via EtherNet port FINS/TCP connection to EtherNet Unit or EtherNet/IP Unit via EtherNet port CIP connection to EtherNet/IP Unit FINS connection via Controller Link Board FINS connection via SYSMAC LINK Board FINS connection via SYSNET Board FINS connection via modem Simulator Communication to Simulator Format Memory card Format EM file memory File memory operation Transfer Program file, Data file, and Parameter file between CPU unit and File memory Transfer Symbol Files and Comment Files between CX-Programmer and File Memory Delete file Transfer (Copy) files between storages Function

*1. Ladder Support Software *2. SYSMAC Support Software *3. CV Support Software *4. SYSMAC-CPT
Create, Edit, Check IO Table Verify/Compare IO Tables Delete IO Table Installing a CPS File (CS/CJ series)

Function

Display/Write unit production information, unit text (CS/CJ series) Display unit profile information (CS/CJ series) IO Table Set/Transfer/Compare Parameters for Special I/O Units and CPU Bus Units Save Parameters for SIOU Units and CPU Bus Units (CS/CJ series) Start Special Tool for SIOU Units and CPU Bus Units (CSCJ series) Display each rack's power consumption (CS/CJ series) Display rack width (CJ series) Printing function Display the Dip-switches status of the CPU Unit Transfer program (Program, Rung Comment, Attached Comment, IO Table, PLC Settings, Symbol Table, IO Memory, SIOU Unit Parameters) Transfer program Transferring in Task units Verify program (Program, Function Block Body, SFC action, SFC transition, IO Table, IO Memory, PLC setting) Monitoring Ladder View Monitoring Mnemonic View Monitoring Structured Text program Monitoring program Monitoring SFC program Monitoring SFC action, SFC transition, SFC subchart Displaying Flash-ROM back up status Monitoring Function Block Ladder View Monitoring Function Block ST View Set/Reset Change current value Force Set/Reset Change Timer/Counter setting values Differential monitor/Pause monitor Online edit Online editing of Function Block Display errors and error logs occurring Debug program Data trace, Time chart monitor Save result of data trace or time chart monitor Display cycle time/ task execution time Measure MARK instruction execution time (CV/CVM1 series) Read Protection Using Passwords (CS/CJ/CP series) Read Protection for Specific Tasks (CS/CJ/CP series) System or partial protection (CV/CVM1 series) Write Protection (CPM1/CPM1A, CPM2@) Password Protection of Function Bloks Read/Set clock Debugging by using a Simulator Simulation PLC-PT Integrated Simulation PLC Error Simulator Edit IO memory data Edit/Monitor IO memory (Data memory) Monitor IO memory data (PLC Memory window, Address monitor, Watch window, Ladder window, Mnemonic window) Verify/Transfer IO memory data Find contacts of Force set/reset Edit PLC settings PLC settings Transfer PLC settings Verify PLC settings Printing

Function CX-Programmer project file (.CXP); A file containing the all user programs and parameter data created by CX-Programmer. (The.CXP file is a compressed version of the.CXT file.) CXT file (.CXT); A text-based format supported by CX-Programmer. The.CXT file format is used for file conversions. BAK file (.BAK); A backup copy of the project file. Program file (.OBJ); It indicates full program area files. Program index file (PROGRAMS.IDX); CX-Programmer section names, section comments, and program comments.

File extension

Symbols file (SYMBOLS.SYM); CX-Programmer Global symbol tables, Local symbol tables, settings for automatically allocated areas. Comment file (COMMENTS.CMT); CX-Programmer rung comments and comments. OPT file (.OPT); A file containing the preferences for the project. CXO file (.CXO); A file containing the settings made on the Options dialog and the Watch window. MAC file (.MAC); A file containing the keyboard mapping made on the Keyboard Mapping (Shortcut Keys) dialog.

Appendix

CX-Server file (.CDM); A file containing all of the information about the PLCs, which CX-Server can connect to and the addresses of interest in each PLC which may be accessed. A new CX-Server project can be created from the CX-Net Network Configuration tool. Ladder Section Window; It displays the Ladder program graphically. PLC program instructions can be entered as a graphical representation in Ladder form. Output Window; [Compile]; The Compile tab displays the output produced from program compilation. Selecting an error highlights the source of the problem in the Ladder Diagram. The Compile tab also displays other information, for example, warnings and connection messages. [Find Report]; The Find Report tab displays the output produced from a search of project files for a articular entry. [Transfer]; The Transfer tab view displays the results of file or program loading. Watch Window; It displays the value of the addresses of PLC memory during program execution. Mnemonics View; The Mnemonics view is a formatted editor for programming in mnemonic instructions. ST Editor Window; Displays the ST language can be input directly. SFC Editor Window; Displays an SFC chart or subchart. Symbol Table Window; Displays an editable list of symbol definitions - the names, addresses and comments.

System Requirements

The system requirements are the same as those for the CX-One. (The CX-Programmer is included in the CX-One.) For, details, refer to the FA Integrated Tool Package CX-One Datasheet.

Applicable Units

CX-Programmer can be used with SYSMAC CS/CJ/CP/NSJ-series, C-series, and CVM1/C-series PLCs.

Applicable Models

Series CS1H-CPU63/64/65/66/67 (-V1) CS1G-CPU42/43/44/45 (-V1) CS1H-CPU63H/64H/65H/66H/67H CS1G-CPU42H/43H/44H/45H CS1D-CPU65H/67H CS1D-CPU42S/44S/65S/67S CJ1G-CPU44/45 CJ1H-CPU65H/66H/67H/64H-R/65H-R/66H-R/67H-R CJ1G-CPU42H/43H/44H/45H CJ1M-CPU11/12/13/21/22/23 CJ2H-CPU64-EIP/65-EIP/66-EIP/67-EIP/68-EIP CJ2H-CPU64/65/66/67/68 CJ2M-CPU11/12/13/14/15/31/32/33/34/35 CP1H-XA40DR-A/XA40DT-D/XA40DT1-D/X40DR-A/X40DT-D/X40DT1-D/Y20DT-D CP1L-M60DR-A/M60DR-D/M60DT-A/M60DT-D/M60DT1-D/M40DR-A/M40DR-D/M40DT-A/M40DT-D/M40DT1-D/ M30DR-A/M30DR-D/M30DT-A/M30DT-D/M30DT1-D CP1L-L20DR-A/L20DR-D/L20DT-A/L20DT-D/L20DT1-D/L14DR-A/L14DR-D/L14DT-A/L14DT-D/L14DT1-D/L10DR-A/ L10DR-D/L10DT-A/L10DT-D/L10DT1-D CP1E-E40DR-A/E30DR-A/E20DR-A/E14DR-A/E10DR-A/E10DT-A/E10DT1-A/E10DR-D/E10DT-D/E10DT1-D CP1E-N60DR-A/N60DT-A/N60DT1-A/N60DR-D/N60DT-D/N60DT1-D/N40DR-A/N40DR-D/N40DT-A/N40DT-D/ N40DT1-A/N40DT1-D/N30DR-A/N30DR-D/N30DT-A/N30DT-D/N30DT1-A/N30DT1-D/N20DR-A/N20DR-T/ N20DT-A/N20DT-D/N20DT1-A/N20DT1-D/N14DR-A/N14DT-A/N14DT1-A/N14DR-D/N14DT-D/N14DT1-D CP1E-NA20DR-A/NA20DT-D/NA20DT1-D NSJ5-@-G5D NSJ8-@-G5D NSJ10-@-G5D NSJ12-@-G5D NSJ5-@-M3D NSJ8-@-M3D C1000H-CPU01 C2000H-CPU01 Simplex system C200H-CPU01/02/03/11/21/22/23/31 C200HX-CPU34/44/54/64 C200HG-CPU33/43/53/63 C200HE-CPU11/32/42 C200HX-CPU34-Z/CPU44-Z/CPU54-Z/CPU64-Z/CPU65-Z/CPU85-Z C200HG-CPU33-Z/CPU43-Z/CPU53-Z/CPU63-Z C-series C200HS CPM1A-series CPM2A-series CPM2C-series CPM2@-S@ CQM1 CQM1H-series CV1000 CV2000 CVM1/CV-series CV500 CVM1 CVM1-V2 FQM1 IDSC SRM1 C200HE-CPU11-Z/CPU32-Z/CPU42-Z C200HS-CPU01/03/21/23/31/33 CPM1 (A)-10CDR/20CDR/30CDR/40CDR (-V1) CPM2A-20CD/30CD/40CD/60CD CPM2C-10CD/10C1D/20CD/20C1D CPM2C-S100C/110C CPM2C-S110C-DRT CQM1-CPU11/21/41/42/43/44/45 CQM1H-CPU11/21/51/61 CV1000-CPU01 (-V1) CV2000-CPU01 (-V1) CV500-CPU01 (-V1) CVM1-CPU01/1 (-V1) CVM1-CPU01-V2/CPU11-V2/CPU21-V2 FQM1-CM001/CM002 Coordinator module FQM1-MMA21/MMA22/MMP21/MMP22 Motion control module IDSC-C1DR-A/C1DT-A SRM1-C01/C02 (-V1/-V2) Unit

CS-series

CJ-series CS/CJ/CP-series

CP-series

NSJ-series

NSJ Controller

C1000H C2000H C200H

-series

Related Manuals
Cat.No. W446 W447 W469 W463 W445 Model CXONE-AL@@C-V4/ AL@@D-V4 CXONE-AL@@C-V4/ AL@@D-V4 CXONE-AL@@C-V4/ AL@@D-V4 CXONE-AL@@C-V4/ AL@@D-V4 CXONE-AL@@C-V4/ AL@@D-V4 Manual name CX-Programmer Ver. 9.@ Operation Manual CX-Programmer Ver. 9.@ Operation Manual Function Blocks/Structured Texts CX-Programmer Operation Manual: SFC CX-One Setup Manual CX-Integrator Operation Manual Contents Provides information on how to use the CX-Programmer for all functionality except for function blocks. Describes the function block functions and structured text programming functions that can be used with the CX-Programmer version 9.@. For details on other CX-Programmer functions, refer to the CX-Programmer Ver. 9.@ Operation Manual (Cat. No.W446). Explains how to use the SFC programming functions. For explanations of other shared CX-Programmer functions, refer to the CX-Programmer Operation Manual (W446). Installation and overview of CX-One FA Integrated Tool Package. Describes the operating procedures for the CX-Integrator.
Read and Understand This Catalog
Please read and understand this catalog before purchasing the products. Please consult your OMRON representative if you have any questions or comments.
Warranty and Limitations of Liability

WARRANTY

OMRON's exclusive warranty is that the products are free from defects in materials and workmanship for a period of one year (or other period if specified) from date of sale by OMRON. OMRON MAKES NO WARRANTY OR REPRESENTATION, EXPRESS OR IMPLIED, REGARDING NON-INFRINGEMENT, MERCHANTABILITY, OR FITNESS FOR PARTICULAR PURPOSE OF THE PRODUCTS. ANY BUYER OR USER ACKNOWLEDGES THAT THE BUYER OR USER ALONE HAS DETERMINED THAT THE PRODUCTS WILL SUITABLY MEET THE REQUIREMENTS OF THEIR INTENDED USE. OMRON DISCLAIMS ALL OTHER WARRANTIES, EXPRESS OR IMPLIED.

LIMITATIONS OF LIABILITY

OMRON SHALL NOT BE RESPONSIBLE FOR SPECIAL, INDIRECT, OR CONSEQUENTIAL DAMAGES, LOSS OF PROFITS OR COMMERCIAL LOSS IN ANY WAY CONNECTED WITH THE PRODUCTS, WHETHER SUCH CLAIM IS BASED ON CONTRACT, WARRANTY, NEGLIGENCE, OR STRICT LIABILITY. In no event shall the responsibility of OMRON for any act exceed the individual price of the product on which liability is asserted. IN NO EVENT SHALL OMRON BE RESPONSIBLE FOR WARRANTY, REPAIR, OR OTHER CLAIMS REGARDING THE PRODUCTS UNLESS OMRON'S ANALYSIS CONFIRMS THAT THE PRODUCTS WERE PROPERLY HANDLED, STORED, INSTALLED, AND MAINTAINED AND NOT SUBJECT TO CONTAMINATION, ABUSE, MISUSE, OR INAPPROPRIATE MODIFICATION OR REPAIR.
Application Considerations

SUITABILITY FOR USE

OMRON shall not be responsible for conformity with any standards, codes, or regulations that apply to the combination of products in the customer's application or use of the products. At the customer's request, OMRON will provide applicable third party certification documents identifying ratings and limitations of use that apply to the products. This information by itself is not sufficient for a complete determination of the suitability of the products in combination with the end product, machine, system, or other application or use. The following are some examples of applications for which particular attention must be given. This is not intended to be an exhaustive list of all possible uses of the products, nor is it intended to imply that the uses listed may be suitable for the products: Outdoor use, uses involving potential chemical contamination or electrical interference, or conditions or uses not described in this catalog. Nuclear energy control systems, combustion systems, railroad systems, aviation systems, medical equipment, amusement machines, vehicles, safety equipment, and installations subject to separate industry or government regulations. Systems, machines, and equipment that could present a risk to life or property. Please know and observe all prohibitions of use applicable to the products. NEVER USE THE PRODUCTS FOR AN APPLICATION INVOLVING SERIOUS RISK TO LIFE OR PROPERTY WITHOUT ENSURING THAT THE SYSTEM AS A WHOLE HAS BEEN DESIGNED TO ADDRESS THE RISKS, AND THAT THE OMRON PRODUCTS ARE PROPERLY RATED AND INSTALLED FOR THE INTENDED USE WITHIN THE OVERALL EQUIPMENT OR SYSTEM.

PROGRAMMABLE PRODUCTS

OMRON shall not be responsible for the user's programming of a programmable product, or any consequence thereof.

Disclaimers

CHANGE IN SPECIFICATIONS
Product specifications and accessories may be changed at any time based on improvements and other reasons. It is our practice to change model numbers when published ratings or features are changed, or when significant construction changes are made. However, some specifications of the products may be changed without any notice. When in doubt, special model numbers may be assigned to fix or establish key specifications for your application on your request. Please consult with your OMRON representative at any time to confirm actual specifications of purchased products.

DIMENSIONS AND WEIGHTS

Dimensions and weights are nominal and are not to be used for manufacturing purposes, even when tolerances are shown.

PERFORMANCE DATA

Performance data given in this catalog is provided as a guide for the user in determining suitability and does not constitute a warranty. It may represent the result of OMRONs test conditions, and the users must correlate it to actual application requirements. Actual performance is subject to the OMRON Warranty and Limitations of Liability.

ERRORS AND OMISSIONS

The information in this document has been carefully checked and is believed to be accurate; however, no responsibility is assumed for clerical, typographical, or proofreading errors, or omissions.
2011.4 In the interest of product improvement, specifications are subject to change without notice.
Industrial Automation Company

http://www.ia.omron.com/

OMRON Corporation
(c)Copyright OMRON Corporation 2011 All Right Reserved.