DeviceNet Configurator Software Version 2.@

WS02-CFDC1

DeviceNet Configurator PC Card (Software Included)

3G8E2-DRM21-V1

Easily Build and Maintain Multi-vendor DeviceNet Networks.
Easily build networks using graphical screen operations. Make connections from a DeviceNet Card for personal computers or from a serial port. Monitor devices while connected online. Build maintenance systems with Smart Slaves.

Ordering Information

Name DeviceNet Configurator Software DeviceNet Configurator PC Card * * Applicable OS Windows 98, Me, NT4.0, 2000, XP Windows 98, Me, 2000, XP Model WS02-CFDC1-E 3G8E2-DRM21-EV1
The DeviceNet Configurator Software is included with the 3G8E2-DRM21-V1.
Building and Setting Networks

Specifications

Basic Functions Virtual network management, device settings (I/O allocations, connection settings), device monitoring, device (EDS file) management, and online connections to DeviceNet devices Configurator network configuration files (*.npf) Configurator device parameter files (*.pvf) I/O comments: CSV-format files (*.csv) NetXServer DDE settings file (*.nxd) NetXServer ONC settings files (*.ini) ONC DRM Unit settings files (*.ini)
Easy to Build Networks Using Graphical Screen Operations
You can build a network and make device settings on a computer by dragging and dropping devices selected from the hardware list for virtual networks (equivalent to network configuration files) in the Configurator. Also, configurations can be downloaded to devices online and saved in files. Setting Device Parameters You can configure a network and edit device parameters by dragging and dropping device files in the virtual network in the Configurator when it is offline. This improves design efficiency. Hardware list Network Configuration Window

Created Files

Files created by exporting data

System Requirements

CPU Pentium 166 MHz or better Note: Pentium 150 MHz or better for Windows Me Recommended: Pentium 200 MHz or better Windows 98, 98 SE, NT 4.0 (SP6a), 2000 (SP2 or higher), or XP
Hardware for Network Connection
Either of the following software applications is required to connect online to DeviceNet devices. OMRON DeviceNet Board Special PCI Board: 3G8F7-DRM21 Special PC Card: 3G8E2-DRM21-V1 OMRON CS/CJ-series PLC equipped with DeviceNet Unit Peripheral port *1 Serial communications port or Serial Communications Unit *1 Ethernet Unit *2 *1: An RS-232C COM port is required on the computer. *2: An Ethernet port is required on the computer.
Device parameters Creating a Scan List with the Wizard (Conversational Settings) You can use the wizard to easily allocate I/O and register Slaves to the Master to create a scan list. And, you can easily check allocations to registered Slaves.

Overview

Configurator version 2.@ software provides functionality to build and operate multivendor DeviceNet networks as well as easily to use those networks by manipulating graphical screens. The Configurator enables creating virtual network configurations offline and making settings for devices. Also, maintenance information in Slaves can be set and monitored to build maintenance systems if Smart Slaves are used.

Scan List Wizard

DeviceNet Configurator
WS02-CFDC1/3G8E2-DRM21-V1

Online Connections

Connection from a DeviceNet Board for PC or Serial Port
Connections can be made online using a DeviceNet Board, DeviceNet Card, or OMRON CS/CJ-series PLC from the computer. You can directly connect to DeviceNet devices by using an OMRON PCI Board or PC Card through a DeviceNet Board or DeviceNet Card. (Nodes are allocated to the Board/Card.) Computer RS-232C COM Port Connection Connections can be made using a peripheral port or a serial port on a Serial Communications Board/Unit of an OMRON CS/CJ-series PLC that has a DeviceNet Unit connected to the COM port on a computer. Computer Ethernet Port Connection Connections can be made using an Ethernet Unit of an OMRON CS/CJ-series PLC that has a DeviceNet Unit connected to the Ethernet port on a computer.

Building Maintenance Systems
Maintenance Systems Built with Smart Slaves
Smart Slave Maintenance Information Maintenance information stored in Smart Slaves can be read and use to build a maintenance system that functions separately from the control system.

Control System

Maintenance System
Ethernet Maintenance information

Operation time monitor

DeviceNet Configurator Ethernet port RS-232C port OMRON CS/CJ-series PLC PCI Board PC Card

Control data

Preventive maintenance for equipment
Contact operation counter Power ON time monitor Unit comments and comments for connected devices I/O power supply status monitor Faster startup Communications power supply voltage status monitor Less downtime Communications error history monitor
Reliable equipment startup

DRT2-series Smart Slave

Device Management and Monitoring
Monitor Devices While Connected Online
Support for Network Downloading and Monitoring for Devices* The following items can be monitored using an OMRON CS/CJ-series PLC. Overall communications status of network Status of Masters and Slaves Unit status Communications cycle time Error history * This applies only to devices with the monitor function. Upload Window
The cylinder speed is strange.

Operation Time Monitor

Time to inspect the switches?
Contact Operation Counter *
Time for motor maintenance?

Power ON Time Monitor *

Is there an error?
Whats the communications voltage?
Is the I/O power supply ON?
Communications I/O Power Supply Communications Error History Monitor Power Supply Status Monitor Voltage Status Monitor *You cannot use the contact operation counter and the power ON time monitor at the same time.

Maintenance Mode Window

Maintenance information Unit comment Device Monitor You can check the status with the status icons.

Configurator List

Software only: WS02-CFDC1-E PC Card with software included: 3G8E2-DRM21-V1 (Applicable OS: Windows 98, Me, 2000, and XP)
Read and Understand This Catalog
Please read and understand this catalog before purchasing the products. Please consult your OMRON representative if you have any questions or comments.
Warranty and Limitations of Liability

WARRANTY

OMRON's exclusive warranty is that the products are free from defects in materials and workmanship for a period of one year (or other period if specified) from date of sale by OMRON. OMRON MAKES NO WARRANTY OR REPRESENTATION, EXPRESS OR IMPLIED, REGARDING NON-INFRINGEMENT, MERCHANTABILITY, OR FITNESS FOR PARTICULAR PURPOSE OF THE PRODUCTS. ANY BUYER OR USER ACKNOWLEDGES THAT THE BUYER OR USER ALONE HAS DETERMINED THAT THE PRODUCTS WILL SUITABLY MEET THE REQUIREMENTS OF THEIR INTENDED USE. OMRON DISCLAIMS ALL OTHER WARRANTIES, EXPRESS OR IMPLIED.

LIMITATIONS OF LIABILITY

OMRON SHALL NOT BE RESPONSIBLE FOR SPECIAL, INDIRECT, OR CONSEQUENTIAL DAMAGES, LOSS OF PROFITS OR COMMERCIAL LOSS IN ANY WAY CONNECTED WITH THE PRODUCTS, WHETHER SUCH CLAIM IS BASED ON CONTRACT, WARRANTY, NEGLIGENCE, OR STRICT LIABILITY. In no event shall the responsibility of OMRON for any act exceed the individual price of the product on which liability is asserted. IN NO EVENT SHALL OMRON BE RESPONSIBLE FOR WARRANTY, REPAIR, OR OTHER CLAIMS REGARDING THE PRODUCTS UNLESS OMRON'S ANALYSIS CONFIRMS THAT THE PRODUCTS WERE PROPERLY HANDLED, STORED, INSTALLED, AND MAINTAINED AND NOT SUBJECT TO CONTAMINATION, ABUSE, MISUSE, OR INAPPROPRIATE MODIFICATION OR REPAIR.
Application Considerations

SUITABILITY FOR USE

OMRON shall not be responsible for conformity with any standards, codes, or regulations that apply to the combination of products in the customer's application or use of the products. At the customer's request, OMRON will provide applicable third party certification documents identifying ratings and limitations of use that apply to the products. This information by itself is not sufficient for a complete determination of the suitability of the products in combination with the end product, machine, system, or other application or use. The following are some examples of applications for which particular attention must be given. This is not intended to be an exhaustive list of all possible uses of the products, nor is it intended to imply that the uses listed may be suitable for the products: Outdoor use, uses involving potential chemical contamination or electrical interference, or conditions or uses not described in this catalog. Nuclear energy control systems, combustion systems, railroad systems, aviation systems, medical equipment, amusement machines, vehicles, safety equipment, and installations subject to separate industry or government regulations. Systems, machines, and equipment that could present a risk to life or property. Please know and observe all prohibitions of use applicable to the products. NEVER USE THE PRODUCTS FOR AN APPLICATION INVOLVING SERIOUS RISK TO LIFE OR PROPERTY WITHOUT ENSURING THAT THE SYSTEM AS A WHOLE HAS BEEN DESIGNED TO ADDRESS THE RISKS, AND THAT THE OMRON PRODUCTS ARE PROPERLY RATED AND INSTALLED FOR THE INTENDED USE WITHIN THE OVERALL EQUIPMENT OR SYSTEM.

PROGRAMMABLE PRODUCTS

OMRON shall not be responsible for the user's programming of a programmable product, or any consequence thereof.

Disclaimers

CHANGE IN SPECIFICATIONS
Product specifications and accessories may be changed at any time based on improvements and other reasons. It is our practice to change model numbers when published ratings or features are changed, or when significant construction changes are made. However, some specifications of the products may be changed without any notice. When in doubt, special model numbers may be assigned to fix or establish key specifications for your application on your request. Please consult with your OMRON representative at any time to confirm actual specifications of purchased products.

DIMENSIONS AND WEIGHTS

Dimensions and weights are nominal and are not to be used for manufacturing purposes, even when tolerances are shown.

PERFORMANCE DATA

Performance data given in this catalog is provided as a guide for the user in determining suitability and does not constitute a warranty. It may represent the result of OMRONs test conditions, and the users must correlate it to actual application requirements. Actual performance is subject to the OMRON Warranty and Limitations of Liability.

ERRORS AND OMISSIONS

The information in this document has been carefully checked and is believed to be accurate; however, no responsibility is assumed for clerical, typographical, or proofreading errors, or omissions.
2009.8 In the interest of product improvement, specifications are subject to change without notice.
Industrial Automation Company

http://www.ia.omron.com/

OMRON Corporation
(c)Copyright OMRON Corporation 2009 All Right Reserved.

CSM_DeviceNet_Safety_OP_E_2_1

DeviceNet Safety

Accessories
Terminal Blocks for the NE1A
Appearance Specification Applicable Controllers Model Remarks
Screw terminal blocks (4 pins) NE1A-SCPU01 NE1A-SCPU01-V1 NE1A-SCPU02 NE1A-EDR01 Spring-cage terminal blocks (4 pins)

Y9S-04T1B-02A

A set including two screw terminal blocks (black) and six code marks to prevent incorrect insertion

Y9S-04C1B-02A

A set including two spring-cage terminal blocks (black) and six code marks to prevent incorrect insertion
Note: The standard NE1A Controllers are equipped with spring-cage terminal blocks. Screw terminal blocks can be ordered if desired, e.g., to replace previous terminals.
Terminal Blocks for the DST1
Appearance Specification Applicable Safety I/O Terminals Model Remarks A set including four screw terminal blocks (black), six code marks to prevent incorrect insertion, one set of terminal labels *, and code mark instructions A set including four spring-cage terminal blocks (black), six code marks to prevent incorrect insertion, one set of terminal labels *, and code mark instructions
Screw terminal blocks (10 pins) DST1-ID12SL-1 DST1-MD16SL-1 DST1-XD0808SL-1 DST1-MRD08SL-1 Spring-cage terminal blocks (10 pins)

Y9S-10T1B-04B

Y9S-10C1B-04B
Note: The standard DS1T Safety I/O Terminals are equipped with spring-cage terminal blocks. Screw terminal blocks can be ordered if desired, e.g., to replace previous terminals. * The set of terminal labels is one sheet containing four sets of labels required for one Terminal Block, i.e., [1, 2. 10], [11, 12. 20], [21, 22. 30] and [31, 32. 40].
Peripheral Devices for DeviceNet Communications
Product Appearance Model DCN1-1NC Specification Cable wiring direction: Toward top Cable lock direction: From top Connector screw direction: From top Provided with 3 parallel connectors with clamps (XW4G-05C1-H1-D), standard terminating resistor
DCN1-1C T-branch Tap for 1 branch line DCN1-2C
Cable wiring direction: Toward side Cable screw direction: From top Connector screw direction: From side Provided with 3 parallel connectors with screws (XW4B-05C1-H1-D), standard terminating resistor Cable wiring direction: Toward top Cable screw direction: From side Connector screw direction: From top Cable wiring direction: Toward side Cable screw direction: From top Connector screw direction: From top Cable wiring direction: Toward top Cable lock direction: From top Connector screw direction: From top Provided with 3 orthogonal connectors with screws (XW4B05C1-VIR-D), standard terminating resistor Provided with 5 parallel clamp connectors with screws (XW4G05C1-H1-D), standard terminating resistor

DCN1-2R

DCN1-3NC
DCN1-3C T-branch Tap for 3 branch lines DCN1-4C
Cable wiring direction: Toward side Cable screw direction: From top Connector screw direction: From side Provided with 5 parallel connectors with screws (XW4B-05C1-H1-D), standard terminating resistor Cable wiring direction: Toward top Cable screw direction: From side Connector screw direction: From top Cable wiring direction: Toward side Cable screw direction: From top Connector screw direction: From top Provided with 5 orthogonal clamp connectors with screws (XW4B05C1-VIR-D), standard terminating resistor

DCN1-4R

Power Supply Tap

DCN1-1P

One-branch tap provided with 2 connectors, standard terminating resistor, and fuse

XW4G-05C1-H1-D

Parallel clamp connector with screws Connector insertion and wiring both performed horizontally.

XW4G-05C4-TF-D

Parallel multi-branching clamp connector with screws Connector insertion and wiring performed in same direction.
XW4B-05C1-H1-D Connectors XW4B-05C4-T-D
Parallel connector with screws Connector insertion and wiring performed in same direction.
Parallel, screw-less, multi-branching connector Connector insertion and wiring performed in same direction.

XW4B-05C4-TF-D

Parallel, multi-branching connector with screws Connector insertion and wiring performed in same direction.

XW4B-05C1-VIR-D

Orthogonal connector with screws Connector insertion and wiring performed at a right angle. Thin cable length: 100 m DCA1-5C10-B: Cable color: Blue DCA1-5C10: Cable color: Gray Thick cable length: 100 m DCA2-5C10-B: Cable color: Blue DCA2-5C10: Cable color: Gray Resistance of 121
DCA1-5C10 (-B) DeviceNet Cables DCA2-5C10 (-B)
Terminal-block Terminator

DRS1-T

Read and Understand This Catalog
Please read and understand this catalog before purchasing the products. Please consult your OMRON representative if you have any questions or comments.
Warranty and Limitations of Liability

WARRANTY

OMRON's exclusive warranty is that the products are free from defects in materials and workmanship for a period of one year (or other period if specified) from date of sale by OMRON. OMRON MAKES NO WARRANTY OR REPRESENTATION, EXPRESS OR IMPLIED, REGARDING NON-INFRINGEMENT, MERCHANTABILITY, OR FITNESS FOR PARTICULAR PURPOSE OF THE PRODUCTS. ANY BUYER OR USER ACKNOWLEDGES THAT THE BUYER OR USER ALONE HAS DETERMINED THAT THE PRODUCTS WILL SUITABLY MEET THE REQUIREMENTS OF THEIR INTENDED USE. OMRON DISCLAIMS ALL OTHER WARRANTIES, EXPRESS OR IMPLIED.

LIMITATIONS OF LIABILITY

OMRON SHALL NOT BE RESPONSIBLE FOR SPECIAL, INDIRECT, OR CONSEQUENTIAL DAMAGES, LOSS OF PROFITS OR COMMERCIAL LOSS IN ANY WAY CONNECTED WITH THE PRODUCTS, WHETHER SUCH CLAIM IS BASED ON CONTRACT, WARRANTY, NEGLIGENCE, OR STRICT LIABILITY. In no event shall the responsibility of OMRON for any act exceed the individual price of the product on which liability is asserted. IN NO EVENT SHALL OMRON BE RESPONSIBLE FOR WARRANTY, REPAIR, OR OTHER CLAIMS REGARDING THE PRODUCTS UNLESS OMRON'S ANALYSIS CONFIRMS THAT THE PRODUCTS WERE PROPERLY HANDLED, STORED, INSTALLED, AND MAINTAINED AND NOT SUBJECT TO CONTAMINATION, ABUSE, MISUSE, OR INAPPROPRIATE MODIFICATION OR REPAIR.
Application Considerations

SUITABILITY FOR USE

OMRON shall not be responsible for conformity with any standards, codes, or regulations that apply to the combination of products in the customer's application or use of the products. At the customer's request, OMRON will provide applicable third party certification documents identifying ratings and limitations of use that apply to the products. This information by itself is not sufficient for a complete determination of the suitability of the products in combination with the end product, machine, system, or other application or use. The following are some examples of applications for which particular attention must be given. This is not intended to be an exhaustive list of all possible uses of the products, nor is it intended to imply that the uses listed may be suitable for the products: Outdoor use, uses involving potential chemical contamination or electrical interference, or conditions or uses not described in this catalog. Nuclear energy control systems, combustion systems, railroad systems, aviation systems, medical equipment, amusement machines, vehicles, safety equipment, and installations subject to separate industry or government regulations. Systems, machines, and equipment that could present a risk to life or property. Please know and observe all prohibitions of use applicable to the products. NEVER USE THE PRODUCTS FOR AN APPLICATION INVOLVING SERIOUS RISK TO LIFE OR PROPERTY WITHOUT ENSURING THAT THE SYSTEM AS A WHOLE HAS BEEN DESIGNED TO ADDRESS THE RISKS, AND THAT THE OMRON PRODUCTS ARE PROPERLY RATED AND INSTALLED FOR THE INTENDED USE WITHIN THE OVERALL EQUIPMENT OR SYSTEM.

PROGRAMMABLE PRODUCTS

OMRON shall not be responsible for the user's programming of a programmable product, or any consequence thereof.

Disclaimers

CHANGE IN SPECIFICATIONS
Product specifications and accessories may be changed at any time based on improvements and other reasons. It is our practice to change model numbers when published ratings or features are changed, or when significant construction changes are made. However, some specifications of the products may be changed without any notice. When in doubt, special model numbers may be assigned to fix or establish key specifications for your application on your request. Please consult with your OMRON representative at any time to confirm actual specifications of purchased products.

DIMENSIONS AND WEIGHTS

Dimensions and weights are nominal and are not to be used for manufacturing purposes, even when tolerances are shown.

PERFORMANCE DATA

Performance data given in this catalog is provided as a guide for the user in determining suitability and does not constitute a warranty. It may represent the result of OMRONs test conditions, and the users must correlate it to actual application requirements. Actual performance is subject to the OMRON Warranty and Limitations of Liability.

ERRORS AND OMISSIONS

The information in this document has been carefully checked and is believed to be accurate; however, no responsibility is assumed for clerical, typographical, or proofreading errors, or omissions.
2008.12 In the interest of product improvement, specifications are subject to change without notice.
Industrial Automation Company

http://www.ia.omron.com/

OMRON Corporation
(c)Copyright OMRON Corporation 2008 All Right Reserved.