Output Units

E53-@@
1. Control Output R: Relay output Q: Voltage output (for driving SSR) Q3: Voltage output (for driving SSR) + 24 VDC (NPN) Q4: Voltage output (for driving SSR) + 24 VDC (PNP) C3: Current output + 4 to 20 mA DC C3D: Current output + 0 to 20 mA DC V34: Linear voltage output + 0 to 10 VDC V35: Linear voltage output + 0 to 5 VDC 2. Version Blank: Available for E5AN-E5EN-H and E5AK/E5EK. N: Available only for E5AN-H/E5EN-H.
This data sheet is provided as a guideline for selecting products. Be sure to refer to the following user manuals for application precautions and other information required for operation before attempting to use the product. E5CN-H/E5AN-H/E5EN-H Digital Controllers User's Manual Advanced Type (Cat. No. H157) E5CN-H/E5AN-H/E5EN-H Digital Controllers Communications Manual Advanced Type (Cat. No. H159)

Ordering Information

Size Case color Power supply voltage Control Auxiliary method output Control output 1/2 Control Output Unit 2 SSR outputs Control Output Unit 2 Basic 100 to 240 VAC 3 SSR outputs 2 Relay outputs 2 Valve Black Control Output Unit 2 1/4 DIN 78 (W H D) Basic 24 VAC/ VDC 3 SSR outputs 2 Relay outputs 2 Valve 2 Relay outputs 2 Control Output Unit 2 Basic 2 Control Output Unit 2 Control Output Unit SSR outputs 2 Control Output Unit SSR outputs Control Output Unit Relay outputs SSR outputs 2 Control Output Unit Heater burnout Optional functions Event inputs Transfer output RSP Model
4 to 20-mA E5AN-HAA2HBM-500 input 4 to 20-mA E5AN-HSS2HBM-500 input 4 to 20-mA 4 to 20-mA E5AN-HAA2HHBFM-500 output input 4 to 20-mA 4 to 20-mA E5AN-HSS2HHBFM-500 output input 4 to 20-mA 4 to 20-mA E5AN-HAA3BFM-500 output input 4 to 20-mA 4 to 20-mA E5AN-HSS3BFM-500 output input 4 to 20-mA E5AN-HPRR2BM-500 input 4 to 20-mA 4 to 20-mA E5AN-HPRR2BFM-500 output input 4 to 20-mA E5AN-HAA2HBMD-500 input 4 to 20-mA E5AN-HSS2HBMD-500 input 4 to 20-mA 4 to 20-mA E5AN-HAA2HHBFMD-500 output input 4 to 20-mA 4 to 20-mA E5AN-HSS2HHBFMD-500 output input 4 to 20-mA 4 to 20-mA E5AN-HAA3BFMD-500 output input 4 to 20-mA 4 to 20-mA E5AN-HSS3BFMD-500 output input 4 to 20-mA E5AN-HPRR2BMD-500 input 4 to 20-mA 4 to 20-mA E5AN-HPRR2BFMD-500 output input 4 to 20-mA E5AN-HAA2HBM-W-500 input 4 to 20-mA 4 to 20-mA E5AN-HAA2HHBFM-W-500 output input 4 to 20-mA E5AN-HAA2HBMD-W-500 input

Silver

100 to 240 VAC 24 VAC/ VDC

Size Case color Power supply voltage Control method Auxiliary output Control output 1/2 Control Output Unit 2 SSR outputs Control Output Unit 2 Basic SSR outputs to 240 VAC Control Output Unit SSR outputs 2 Relay outputs 2 Valve Black Control Output Unit 2 1/8 DIN 78 (W H D) Basic SSR outputs VAC/VDC Control Output Unit SSR outputs 2 Relay outputs 2 Valve 2 Relay outputs 2 Control Output Unit to 240 VAC Silver 24 VAC/VDC Basic 2 Control Output Unit 2 Control Output Unit 2 SSR outputs Control Output Unit Relay outputs 2 Optional Functions Heater burn- Event Transfer RSP out inputs output Model
4 to 20-mA E5EN-HAA2HBM-500 input 4 to 20-mA E5EN-HSS2HBM-500 input 4 to 20-mA 4 to 20-mA E5EN-HAA2HHBFM-500 input output 4 to 20-mA 4 to 20-mA E5EN-HSS2HHBFM-500 output input 4 to 20-mA 4 to 20-mA E5EN-HAA3BFM-500 output input 4 to 20-mA 4 to 20-mA E5EN-HSS3BFM-500 output input 4 to 20-mA E5EN-HPRR2BM-500 input 4 to 20-mA 4 to 20-mA E5EN-HPRR2BFM-500 output input 4 to 20-mA E5EN-HAA2HBMD-500 input 4 to 20-mA E5EN-HSS2HBMD-500 input 4 to 20-mA 4 to 20-mA E5EN-HAA2HHBFMD-500 output input 4 to 20-mA 4 to 20-mA E5EN-HSS2HHBFMD-500 output input 4 to 20-mA 4 to 20-mA E5EN-HAA3BFMD-500 output input 4 to 20-mA 4 to 20-mA E5EN-HSS3BFMD-500 output input 4 to 20-mA E5EN-HPRR2BMD-500 input 4 to 20-mA 4 to 20-mA E5EN-HPRR2BFMD-500 output input 4 to 20-mA E5EN-HAA2HBM-W-500 input 4 to 20-mA 4 to 20-mA E5EN-HAA2HHBFM-W-500 output input 4 to 20-mA E5EN-HAA2HBMD-W-500 input
Accessories (Order Separately)
Output unit Relay output Voltage output (for driving SSR) Model E53-RN E53-QN E53-Q3 E53-Q4 E53-C3N E53-C3DN E53-V34N E53-V35N Specifications SPST-NO, 250 VAC, 5 A (resistive load), electrical life: 100,000 operations 12 VDC (PNP), max. load current: 40-mA, with short-circuit protection 24 VDC (NPN), max. load current: 20-mA, with short-circuit protection 24 VDC (PNP), max. load current: 20-mA, with short-circuit protection 4 to 20-mA DC, load: 600 max., resolution: approx. 10,to 20-mA DC, load: 600 max., resolution: approx. 10,to 10 VDC, load: 1 k min., resolution: approx. 10,to 5 VDC, load: 1 k min., resolution: approx. 10,000

Terminal Cover

Connectable models E5AN-H Model
E53-COV16 E5EN-H Note: The Terminal Cover comes with the E5CN-@@@-500 models.

Waterproof Packing

Connectable models E5AN-H Model Y92S-P4
E5EN-H Y92S-P5 Note: The Waterproof Packing is included with the Controller.

Current output

Current Transformers (CTs)
Hole diameter 5.8 dia. 12.0 dia. Model E54-CT1 E54-CT3

Linear voltage output

CX-Thermo Support Software

Model EST2-2C-MV4

USB-infrared Conversion Cable

Model E58-CIFIR

USB-Serial Conversion Cable

Model E58-CIFQ1

Specifications

Ratings

Power supply voltage Operating voltage range Power consumption No D in model number: 100 to 240 VAC, 50/60 Hz D in model number: 24 VAC, 50/60 Hz; 24 VDC 85% to 110% of rated supply voltage 100 to 240 VAC: 12 VA 24 VAC/VDC: 8.5 VA (24 VAC)/5.5 W (24 VDC) Any of the following can be selected. Thermocouple: K, J, T, E, L, U, N, R, S, B, W, or PL II Platinum resistance thermometer: Pt100 or JPt100 Current input: 4 to 20 mA or 0 to 20 mA Voltage input: 1 to 5 V, 0 to 5 V, or 0 to 10 V Current input: 150 max., Voltage input: 1 M min. (Use a 1:1 connection when connecting the ES2-HB.) ON/OFF control or 2-PID control (with auto-tuning)

Sensor input

Input impedance Control method Relay output Voltage output (for driving SSR) Control output Current output Linear voltage output Built-in SSR output Relay output for position-proportional control Auxiliary output Number of outputs Output specifications Number of outputs Event input External contact input specifications Number of operations
Output Unit (Install the Output Unit (sold separately).)
75 to 250 VAC, 1 A (resistive load) Relay output: Open and close: SPST-NO, 250 VAC, 1 A (including in-rush current), electrical life: 100,000 operations min. Potentiometer input: Must be between 100 and 2.5 k for maximum open position. 2 or 3 max. Relay output: SPST-NO, 250 VAC, 3 A (resistive load), electrical life: 100,000 operations, minimum applicable load: 5 V, 10 mA 2 or 4 (with an E53-AKB) Contact input: ON: 1 k max., OFF: 100 k min. Non-contact input: ON: Residual voltage: 1.5 V max., OFF: Leakage current: 0.1 mA max. Current flow: Approx. 7 mA per contact 8 max. Logic operation: Any of the following four patterns can be selected. The input status may be inverted. (A and B) or (C and D), (A or C) and (B or D), A or B or C or D, A and B and C and D (A, B, C, and D are four inputs.) Delay: ON delay or OFF delay for the results of the logic operation given above. Setting time: 0 to 9999 s or 0 to 9999 min Output inversion: Possible One work bit per operation Any of The following can be assigned to up to eight work bits (logic operation results): Event input operations, auxiliary outputs, or control outputs. 1 max. (Depends on model. Models with transfer output (F in model number) Current output: 4 to 20 mA DC, Load: 600 max., Resolution at 4 to 20 mA: Approx. 10,Current input: 4 to 20 mA (input impedance: 150 10%) Scaling of signal to engineering units (EU) 19,999 to 30,000 (display: 30,000 max.) (0.2% of FS) 1 digit max. 60 ms Set digitally using keys on the front panel or by using the RSP input. 11-segment digital display and individual indicators (7-segments displays also possible) Character height: E5AN-H: PV: 15.8 mm, SV: 9.5 mm, MV: 6.8 mm; E5EN-H: PV: 11.8 mm, SV: 8.1 mm, MV: 5.8 mm Content of 3-level display: PV/SV/MV, PV/SV/Bank No., or soak time remain Number of digits: 5 for PV and SV, 4 for MV Supported (number of banks: 8) Local SP, alarm settings, PID sets (PID constants, MV upper limit, MV lower limit, etc.) Manual output, heating/cooling control, loop burnout alarm, SP ramp, other alarm functions, heater burnout detection, 40% AT, 100% AT, MV limiter, input digital filter, self-tuning, temperature input shift, run/stop, protection functions, control output ON/OFF counter, extraction of square root, MV change rate limit, PV/SV status display, logic operations, automatic cooling coefficient adjustment 10 to 55C (with no condensation or icing), for 3-year warranty: 10 to 50C 25% to 85% 25 to 65C (with no condensation or icing)

Logic operations

Operations
Output Work bit assignment Transfer outputs Number of outputs Output specifications Number of inputs Signal type RSP input Analog input scaling Accuracy Input sampling period Setting method Indication method

Bank switching

Other functions Ambient operating temperature Ambient operating humidity Storage temperature

Input Ranges

Thermocouple/Platinum Resistance Thermometer (Fully Universal Inputs)

Input type Name

100.0 200.0
200.0199.9 100.0 0.0 50.00 199.9 200.0 200.00 100.0 100.0 0.0 20.0 50.00100.0 20.0 50.00 200.0199.9 50.00 200.0 100.0 200.0199.9200.0 0.0 0.0 0.0 0.0 200.00 500.0 500.0 500.0 400.0 200.00 400.0 400.0 200.00 400.0 400.0 600.0 850.0 850.0 850.0 1300.0 1300.0 1300.0 1700.01700.0
Platinum resistance thermometer Pt100 JPt100 K J T
Thermocouple E L U N R S B

1800.0

Analog input W

2300.0

4 to 20 m A

0 to 20 m A

1 to 5V

0 to 5V

0 to 10 V

Temperature range (C)

Usable in the following ranges by scaling: 19999 to 32400, 1999.9 to 3240.0, 199.99 to 324.00, or 19.999 to 32.400

Setting number

Shaded settings are the default settings. The applicable standards for the input types are as follows: K, J, T, E, N, R, S, B: JIS C 1602-1995, IEC 584-1 L: Fe-CuNi, DIN 43710-1985 U: Cu-CuNi, DIN 43710-1985 W: W5Re/W26Re, ASTM E988-1990
JPt100: JIS C 1604-1989, JIS C 1606-1989 Pt100: JIS C 1604-1997, IEC 751 PL II: According to Platinel II electromotive force charts from BASF (previously Engelhard)

Alarm Outputs

Each alarm can be independently set to one of the following 13 alarm types. The default is 2: Upper limit. Auxiliary outputs are allocated for alarms. ON delays and OFF delays (0 to 999 s) can also be specified. Note: For models with heater burnout, SSR failure, and heater overcurrent detection, alarm 1 will be an OR output of the alarm selected from the following alarm types and the alarms for heater burnout, SSR failure, and heater overcurrent. To output only a heater burnout alarm, SSR failure alarm, and heater overcurrent alarm for alarm 1, set the alarm type to 0 (i.e., no alarm function). Alarm output operation Set value 4 Alarm type Alarm function OFF Upper- and lower-limit *1 Upper-limit Lower-limit Upper- and lower-limit range *1 Upper- and lower-limit with standby sequence *1 Upper-limit with standby sequence Lower-limit with standby sequence Absolute-value upper-limit Absolute-value lower-limit Absolute-value upper-limit with standby sequence Absolute-value lower-limit with standby sequence LBA (alarm 1 type only) PV change rate alarm RSP absolute value upper limit *6

ON OFF X 0

When alarm value When alarm value X is positive X is negative Output OFF
ON OFF ON OFF ON OFF L SP X SP X SP L SP L SP H H H
Description of function No alarm

ON OFF ON OFF X SP X SP

Set the deviation in the set point by setting the alarm upper limit (H) and alarm lower limit (L). Set the upward deviation in the set point by setting the alarm value (X). Set the downward deviation in the set point by setting the alarm value (X). Set the deviation in the set point by setting the alarm upper limit (H) and alarm lower limit (L). A standby sequence is added to the upper- and lower-limit alarm (1). *7
X SP X SP X 0 X 0 X 0 X 0

ON OFF

ON OFF ON OFF ON OFF ON OFF ON OFF ON OFF

ON OFF ON OFF

A standby sequence is added to the upper-limit alarm (2). *7 A standby sequence is added to the lower-limit alarm (3). *7 The alarm will turn ON if the process value is larger than the alarm value (X) regardless of the set point. The alarm will turn ON if the process value is smaller than the alarm value (X) regardless of the set point. A standby sequence is added to the absolute-value upper-limit alarm (8). *7 A standby sequence is added to the absolute-value lower-limit alarm (9). *7 *8 *9 The alarm turns ON when the remote SP (RSP) is larger than the alarm value (X). This alarm functions in both Local SP and Remote SP Modes. The alarm turns ON when the remote SP (RSP) is smaller than the alarm value (X). This alarm functions in both Local SP and Remote SP Modes.

ON OFF ON OFF ON OFF

----ON OFF X 0
RSP absolute value lower limit *6
*1. With set values 1, 4 and 5, the upper and lower limit values can be set independently for each alarm type, and are expressed as L and H. *2. Set value: 1, Upper- and lower-limit alarm
Case 1 Case 2 Case 3 (Always ON)
H < 0, L < 0 L H SP SP L H H > 0, L < 0 H > L H H SP L SP SP H L L H < 0, L > 0 H L H > 0, L < 0 H L H < 0, L > 0 H < L
*3. Set value: 4, Upper- and lower-limit range
*5. Set value: 5, Upper- and lower-limit with standby sequence Always OFF when the upper-limit and lower-limit hysteresis overlaps. *6. Displayed when there is a remote SP input. *7. Refer to the E5CN/E5AN/E5EN/E5GN Digital Temperature Controllers User's Manual Basic Type (Cat. No. H156) for information on the operation of the standby sequence. *8. Refer to the E5CN/E5AN/E5EN/E5GN Digital Temperature Controllers User's Manual Basic Type (Cat. No. H156) for information on the loop burnout alarm (LBA). *9. Refer to the E5CN/E5AN/E5EN/E5GN Digital Temperature Controllers User's Manual Basic Type (Cat. No. H156) for information on the PV change rate alarm.

*4. Set value: 5, Upper- and lower-limit with standby sequence For Upper- and Lower-Limit Alarm Described Above Case 1 and 2 Always OFF when the upper-limit and lower-limit hysteresis overlaps. Case 3: Always OFF

Characteristics

Indication accuracy Thermocouple: (0.1% of indicated value or 1C, whichever is greater) 1 digit max. *1 Platinum resistance thermometer: (0.1% of indicated value or 0.5C, whichever is greater) 1 digit max. Analog input: 0.1% FS 1 digit max. CT input: 5% FS 1 digit max. Potentiometer input: 5% FS 1 digit max. Thermocouple input (R, S, B, W, PL II): (1% of PV or 10C, whichever is greater) 1 digit max. Other thermocouple input: (1% of PV or 4C, whichever is greater) 1 digit max. *3 Platinum resistance thermometer: (1% of PV or 2C, whichever is greater) 1 digit max. Analog input: (1%FS) 1 digit max. 60 ms Temperature input: 0.1 to 3240.0C or F (in units of 0.1C or F) Analog input: 0.01% to 99.99% FS (in units of 0.01% FS) Temperature input: 0.1 to 3240.0C or F (in units of 0.1C or F) Analog input: 0.1% to 999.9% FS (in units of 0.1% FS) 0.0 to 3240.0 s (in units of 0.1 s) 0.0 to 3240.0 s (in units of 0.1 s) 0.5, 1 to 99 s (in units of 1 s) 0.0 to 100.0% (in units of 0.1%) 19999 to 32400 (decimal point position depends on input type) Thermocouple: 0.1C/ max. (100 max.) Platinum resistance thermometer: 0.1C/ max. (10 max.) 20 M min. (at 500 VDC) 2,300 VAC, 50 or 60 Hz for 1 min (between terminals with different charge)
Transfer output accuracy 0.3% FS max. Influence of temperature *2 Influence of voltage *2 Input sampling period Hysteresis Proportional band (P) Integral time (I) Derivative time (D) Control period Manual reset value Alarm setting range Affect of signal source resistance Insulation resistance Dielectric strength Vibration resistance Shock resistance Weight
Malfunction 10 to 55 Hz, 20 m/s2 for 10 min each in X, Y, and Z directions Destruction 10 to 55 Hz, 0.75-mm single amplitude for 2 hrs each in X, Y, and Z directions Malfunction 100 m/s2, 3 times each in X, Y, and Z directions Destruction 300 m/s2, 3 times each in X, Y, and Z directions E5AN-H E5EN-H Controller: Approx. 310 g, Mounting Bracket: Approx. 100 g Controller: Approx. 260 g, Mounting Bracket: Approx. 100 g Front panel: IP66, Rear case: IP20, Terminals: IP00 Non-volatile memory (number of writes: 1,000,000 times) CX-Thermo version 4.0 or higher Provided on the bottom of the E5AN-H and E5EN-H. An E58-CIFQ1 USB-Serial Conversion Cable is required to connect the computer to the E5AN-H and E5EN-H. Provided on the front of the E5AN-H and E5EN-H. An E58-CIFIR USB-infrared Conversion Cable is required to connect the computer to the E5AN-H or E5EN-H. *4 UL 61010-1, CSA C22.2 No. 1010-1 EN 61010-1 (IEC 61010-1): Pollution level 2, overcurrent category II, Lloyd's standards *5

Degree of protection Memory protection Setup Tool Setup Tool port Approved standards Conformed standards

Standards

EMI: EN 61326 Radiated Interference Electromagnetic Field Strength: EN 55011 Group 1, class A Noise Terminal Voltage: EN 55011 Group 1, class A EMS: EN 61326 ESD Immunity: EN 61000-4-2 EMC Electromagnetic Field Immunity: EN 61000-4-3 Burst Noise Immunity: EN 61000-4-4 Conducted Disturbance Immunity: EN 61000-4-6 Surge Immunity: EN 61000-4-5 Power Frequency Magnetic Field Immunity: EN 61000-4-8 Voltage Dip/Interrupting Immunity: EN 61000-4-11 *1. The indication accuracy of K thermocouples in the 200 to 1300C range, T and N thermocouples at a temperature of 100C max., and U and L thermocouples at any temperatures is 2C 1 digit max. The indication accuracy of the B thermocouple at a temperature of 400C max. is not specified. The indication accuracy of B thermocouples in the 400 to 800C range is 3C max. The indication accuracy of the R and S thermocouples at a temperature of 200C max. is 3C 1 digit max. The indication accuracy of W thermocouples is 0.3% of PV or 3C, whichever is greater, 1 digit max. The indication accuracy of PL II thermocouples is 0.3% of PV or 2C, whichever is greater, 1 digit max. *2. Ambient temperature: 10C to 23C to 55C, Voltage range: 15% to 10% of rated voltage *3. K thermocouple at 100C max.: 10C max. *4. External communications (RS-232C, RS-485, or RS-422) and cable communications for the Setup Tool can be used at the same time. *5. Refer to information on maritime standards in Safety Precautions for E5@N/E5@N-H for compliance with Lloyd's Standards.
Applicable OS Applicable software Applicable models USB interface standard DTE speed Connector specifications Power supply Power supply voltage Current consumption Ambient operating temperature Windows 2000, XP, or Vista CX-Thermo version 4 or higher E5AN/E5EN/E5CN/E5CN-U/ E5AN-H/E5EN-H/E5CN-H/E5GN Conforms to USB Specification 1.1. 38400 bps Computer: USB (type A plug) Temperature Controller: Setup Tool port (on bottom of Controller) Bus power (Supplied from USB host controller.) 5 VDC 70 mA 0 to 55C (with no condensation or icing) 20 to 60C (with no condensation or icing) 10% to 80% 2,000 m max.
Current Transformer (Order Separately) Ratings

Heater overcurrent alarm 0.1 to 49.9 A (in units of 0.1 A) setting range *3 Minimum detection ON time: 100 ms *1. For heater burnout alarms, the heater current will be measured when the control output is ON, and the output assigned to the alarm 1 function will turn ON if the heater current is lower than the set value (i.e., heater burnout detection current value). *2. For SSR failure alarms, the heater current will be measured when the control output is OFF, and the output assigned to the alarm 1 function will turn ON if the heater current is higher than the set value (i.e., SSR failure detection current value). *3. For heater overcurrent alarms, the heater current will be measured when the control output is ON, and the output assigned to the alarm 1 function will turn ON if the heater current is higher than the set value (i.e., heater overcurrent detection current value).
Electrical Life Expectancy Curve for Relays (Reference Values)
Life ( 104 operations) E5AN-H/E5EN-H 250 VAC, 30 VDC (resistive load) cos = 1
SSR Outputs (OUT1/OUT2) Ratings
Rated load voltage: 75 to 250 VAC Rated load current: 1 A (resistive load) Note: 1. The load current must be within the derating curve. 2. There is no zero-cross function.
Derating Curve for SSR Outputs (Reference Values)
Load current I (A) OUT1/OUT2 1.5

1.25 Condition B 1

Switching current (A)

0.5 Condition A 0.25

Ambient temperature (C)
Condition A: SSR outputs 100% ON Condition B: SSR outputs 50% ON with 2-s control cycle

External Connections

Control output 1 and control output 2 are functionally isolated from the internal circuits.

Controllers

The Temperature Controller is set for a K-type thermocouple (input type = 5) by default. An input error (s.err) will occur if the input type setting does not agree with the temperature sensor. Check the input type.

Option Units

Communications E53-EN01 RS-232C

E53-EN02 RS-422

E53-EN03 RS-485

E53-AKB

Event Inputs EV2 EV1
SD RD SG DO NOT USE DO NOT USE

RDB RDA SG SDB SDA

B (+) A () DO NOT USE B (+) A ()

100 to 240 VAC 24 VAC/VDC (no polarity)
1 Input power supply Control output 5 Control output 7 Auxiliary output 9 Auxiliary output 1 10
Event Inputs EV2 EV1 Potentiometer CT2 O W C 14 Auxiliary output Auxiliary output DO NOT USE mA DO NOT USE Relay output SPDT, 250 VAC, 3 A (resistive load) A heater burnout alarm, SSR failure, heater overcurrent alarm, input alarm, or Remote SP Input Error is sent to the output to which the alarm 1 function is assigned.

14 CTCT19 20

DO NOT DO NOT USE USE A DO NOT DO NOT V USE USE B B DO NOT USE
Control Output Unit Control outputs 1, 2 Control Output Unit Control outputs 1, 2 Refer to page 4 SSR Outputs 75 to 250 VAC, 1 A (resistive load) Models with Positionproportional Control Relay output 250 VAC, 1 A (including inrush current)
Auxiliary outputs 1, 2, 3

SSR Outputs

Models with Positionproportional Control
Event input/ Transfer output/ Remote SP EV3 EV24 25

DO NOT USE

1 Input power supply 2 +

Output unit

1 Input power supply SSR
1 Input power supply Open Closed 6 7

Auxiliary output 2

5 SSR 6 7
Auxiliary output 1 Auxiliary output 1
4 to 20 mA DC (Load: 600 max.) 28 29

4 to 20 mA DC

Transfer output

Auxiliary output 1

Relay output SPST-NO, 250 VAC, 3 A (resistive load)

Remote SP input

Note: Wire all voltage input terminals correctly. The Controller may fail if voltage input terminals are wired incorrectly.

Nomenclature

Temperature unit

Operation indicators

SUB1 SUB2
No.1 display Temperature unit

HA SUB3

SUB3 HA

No.1 display

OUT1 RSP STOP OUT2 CMW MANU

No.2 display

RSP OUT1 STOP OUT2 CMW MANU
No.2 display No.3 display

No.3 display

Programmable Function Key/ Auto/Manual Key

Mode Key

Up Key Programmable Function Key/ Auto/Manual Key

Up Key Level Key

Down Key

Level Key

Dimensions

Mounted Separately

+0.8 0

(Unit: mm)

Group Mounted *

(96 number of units 3.5)

+1.0 0

120 min. 6 2

Group mounting does not allow waterproofing.
Recommended panel thickness is 1 to 8 mm. Group mounting is not possible in the vertical direction. (Maintain the specified mounting space between Controllers.) To mount the Controller so that it is waterproof, insert the waterproof packing onto the Controller. When two or more Controllers are mounted, make sure that the surrounding temperature does not exceed the allowable operating temperature specified in the specifications.

* Group mounting is not possible if an SSR output is used for control output 1 or 2 and the E53-C3N or E53-C3DN Output Unit is used. For these combinations, maintain the following mounting space between Controllers.
Waterproof Packing (Accessory) Mounting Bracket (Accessory) Terminal Cover (E53-COV16) (Accessory) Crimp terminal size: M3.min. 92

120 min.

(48 number of units 2.5)
Recommended panel thickness is 1 to 8 mm. Group mounting is not possible in the vertical direction. (Maintain the specified mounting space between Controllers.) When two or more Controllers are mounted, make sure that the surrounding temperature does not exceed the allowable operating temperature specified in the specifications.

+0.6 0

60 min.
92 Waterproof Packing (Accessory) Mounting Bracket (Accessory) Terminal Cover (E53-COV16) (Accessory) Crimp terminal size: M3.min.

E58-CIFIR

(2,000) 54
35.8 USB connector (type A plug) 4.6 dia. LED indicator: RD LED indicator: SD
With Mounting Adapter Connected

Mounting Adapter

16 18.5
Mounting Adapter (Accessory)

21.8 (75)

E58-CIFQ1
(2,100) 250 LED indicator: SD 1,765
USB connector (type A plug)

LED indicator: RD

Serial connector

Terminal Covers

E53-COV16 (Six Covers provided.)

1.2 3.2

Y92S-P4 (for DIN 96 96) Y92S-P5 (for DIN 48 96)
Order the Waterproof Packing separately if it becomes lost or damaged. The Waterproof Packing can be used to achieve an IP66 degree of protection. (Deterioration, shrinking, or hardening of the waterproof packing may occur depending on the operating environment. Therefore, periodic replacement is recommended to ensure the level of waterproofing specified in IP66. The time for periodic replacement depends on the operating environment. Be sure to confirm this point at your site. Consider one year a rough standard. OMRON shall not be liable for the level of water resistance if the customer does not perform periodic replacement.) The Waterproof Packing does not need to be attached if a waterproof structure is not required.

Current Transformers

E54-CT1

5.8 dia. 7.5 2.8

E54-CT1 Thru-current (Io) vs. Output Voltage (Eo) (Reference Values)
Maximum continuous heater current: 50 A (50/60 Hz) Number of windings: 4002 Winding resistance: 182
Output voltage (Eo) V (r.m.s.) 100 V Hz

3 10.Two, 3.5 dia.

1 k Distortion factor 10% 3% 1%

100 mV 100 RL = 10

E54-CT3

2.36 dia. dia. 9

V 10 1

100 mA

100 1,000 A
Thru-current (Io) A (r.m.s.)

Two, M3 (depth 4)

E54-CT3 Thru-current (Io) vs. Output Voltage (Eo) (Reference Values)
Maximum continuous heater current: 120 A (50/60 Hz) (Maximum continuous heater current for an OMRON Temperature Controller is 50 A.) Number of windings: 4002 Winding resistance: 80.8
Output voltage (Eo) V (r.m.s.) 100 V Hz 1 k 500

E54-CT3 Accessory

Armature

Approx. 3 dia.

Connection Example

Armature Plug Lead

Distortion factor 10% 3% 1%

100 mV RL = 100 V 10 1

Approx. 6 dia.
Read and Understand This Catalog
Please read and understand this catalog before purchasing the products. Please consult your OMRON representative if you have any questions or comments.
Warranty and Limitations of Liability

WARRANTY

OMRON's exclusive warranty is that the products are free from defects in materials and workmanship for a period of one year (or other period if specified) from date of sale by OMRON. OMRON MAKES NO WARRANTY OR REPRESENTATION, EXPRESS OR IMPLIED, REGARDING NON-INFRINGEMENT, MERCHANTABILITY, OR FITNESS FOR PARTICULAR PURPOSE OF THE PRODUCTS. ANY BUYER OR USER ACKNOWLEDGES THAT THE BUYER OR USER ALONE HAS DETERMINED THAT THE PRODUCTS WILL SUITABLY MEET THE REQUIREMENTS OF THEIR INTENDED USE. OMRON DISCLAIMS ALL OTHER WARRANTIES, EXPRESS OR IMPLIED.

LIMITATIONS OF LIABILITY

OMRON SHALL NOT BE RESPONSIBLE FOR SPECIAL, INDIRECT, OR CONSEQUENTIAL DAMAGES, LOSS OF PROFITS OR COMMERCIAL LOSS IN ANY WAY CONNECTED WITH THE PRODUCTS, WHETHER SUCH CLAIM IS BASED ON CONTRACT, WARRANTY, NEGLIGENCE, OR STRICT LIABILITY. In no event shall the responsibility of OMRON for any act exceed the individual price of the product on which liability is asserted. IN NO EVENT SHALL OMRON BE RESPONSIBLE FOR WARRANTY, REPAIR, OR OTHER CLAIMS REGARDING THE PRODUCTS UNLESS OMRON'S ANALYSIS CONFIRMS THAT THE PRODUCTS WERE PROPERLY HANDLED, STORED, INSTALLED, AND MAINTAINED AND NOT SUBJECT TO CONTAMINATION, ABUSE, MISUSE, OR INAPPROPRIATE MODIFICATION OR REPAIR.
Application Considerations

SUITABILITY FOR USE

OMRON shall not be responsible for conformity with any standards, codes, or regulations that apply to the combination of products in the customer's application or use of the products. At the customer's request, OMRON will provide applicable third party certification documents identifying ratings and limitations of use that apply to the products. This information by itself is not sufficient for a complete determination of the suitability of the products in combination with the end product, machine, system, or other application or use. The following are some examples of applications for which particular attention must be given. This is not intended to be an exhaustive list of all possible uses of the products, nor is it intended to imply that the uses listed may be suitable for the products: Outdoor use, uses involving potential chemical contamination or electrical interference, or conditions or uses not described in this catalog. Nuclear energy control systems, combustion systems, railroad systems, aviation systems, medical equipment, amusement machines, vehicles, safety equipment, and installations subject to separate industry or government regulations. Systems, machines, and equipment that could present a risk to life or property. Please know and observe all prohibitions of use applicable to the products. NEVER USE THE PRODUCTS FOR AN APPLICATION INVOLVING SERIOUS RISK TO LIFE OR PROPERTY WITHOUT ENSURING THAT THE SYSTEM AS A WHOLE HAS BEEN DESIGNED TO ADDRESS THE RISKS, AND THAT THE OMRON PRODUCTS ARE PROPERLY RATED AND INSTALLED FOR THE INTENDED USE WITHIN THE OVERALL EQUIPMENT OR SYSTEM.

PROGRAMMABLE PRODUCTS

OMRON shall not be responsible for the user's programming of a programmable product, or any consequence thereof.

Disclaimers

CHANGE IN SPECIFICATIONS
Product specifications and accessories may be changed at any time based on improvements and other reasons. It is our practice to change model numbers when published ratings or features are changed, or when significant construction changes are made. However, some specifications of the products may be changed without any notice. When in doubt, special model numbers may be assigned to fix or establish key specifications for your application on your request. Please consult with your OMRON representative at any time to confirm actual specifications of purchased products.

DIMENSIONS AND WEIGHTS

Dimensions and weights are nominal and are not to be used for manufacturing purposes, even when tolerances are shown.

PERFORMANCE DATA

Performance data given in this catalog is provided as a guide for the user in determining suitability and does not constitute a warranty. It may represent the result of OMRONs test conditions, and the users must correlate it to actual application requirements. Actual performance is subject to the OMRON Warranty and Limitations of Liability.

ERRORS AND OMISSIONS

The information in this document has been carefully checked and is believed to be accurate; however, no responsibility is assumed for clerical, typographical, or proofreading errors, or omissions.
2009.11 In the interest of product improvement, specifications are subject to change without notice.
Industrial Automation Company

http://www.ia.omron.com/

OMRON Corporation
(c)Copyright OMRON Corporation 2009 All Right Reserved.

Accessories (Order Separately)
USB-infrared Conversion Cable

Model E58-CIFIR

Waterproof Packing
Connectable models E5AN-H Model Y92S-P4
USB-Serial Conversion Cable

Model E58-CIFQ1

E5EN-H Y92S-P5 Note: The Waterproof Packing is included with the Controller.
Current Transformers (CTs)
Hole diameter Model E54-CT1 E54-CT3 5.8 dia. Model 12.0 dia.

Terminal Cover

Connectable models E5AN-H
E53-COV16 E5EN-H Note: The Terminal Cover comes with the E5CN-@@@-500 models.
CX-Thermo Support Software

Model EST2-2C-MV4

Specifications

Ratings

Power supply voltage Operating voltage range Power consumption No D in model number: 100 to 240 VAC, 50/60 Hz D in model number: 24 VAC, 50/60 Hz; 24 VDC 85% to 110% of rated supply voltage 100 to 240 VAC: 12 VA 24 VAC/VDC: 8.5 VA (24 VAC)/5.5 W (24 VDC) Any of the following can be selected. Thermocouple: K, J, T, E, L, U, N, R, S, B, W, or PL II Platinum resistance thermometer: Pt100 or JPt100 Current input: 4 to 20 mA or 0 to 20 mA Voltage input: 1 to 5 V, 0 to 5 V, or 0 to 10 V Current input: 150 max., Voltage input: 1 M min. (Use a 1:1 connection when connecting the ES2-HB.) ON/OFF control or 2-PID control (with auto-tuning)

Sensor input

Input impedance Control method Relay output Voltage output (for driving SSR) Current output Control output Linear voltage output Built-in SSR output Relay output for positionproportional control Number of outputs Auxiliary Output output specifications Number of outputs Event input External contact input specifications Number of operations
Output Unit (Install the Output Unit (sold separately).)
75 to 250 VAC, 1 A (resistive load) Relay output: Open and close: SPST-NO, 250 VAC, 1 A (including in-rush current), electrical life: 100,000 operations min. Potentiometer input: Must be between 100 and 2.5 k for maximum open position. 2 or 3 max. Relay output: SPST-NO, 250 VAC, 3 A (resistive load), electrical life: 100,000 operations, minimum applicable load: 5 V, 10 mA 2 or 4 (with an E53-AKB) Contact input: ON: 1 k max., OFF: 100 k min. Non-contact input: ON: Residual voltage: 1.5 V max., OFF: Leakage current: 0.1 mA max. Current flow: Approx. 7 mA per contact 8 max. Logic operation: Any of the following four patterns can be selected. The input status may be inverted. (A and B) or (C and D), (A or C) and (B or D), A or B or C or D, A and B and C and D (A, B, C, and D are four inputs.) Delay: ON delay or OFF delay for the results of the logic operation given above. Setting time: 0 to 9999 s or 0 to 9999 min Output inversion: Possible One work bit per operation Any of The following can be assigned to up to eight work bits (logic operation results): Event input operations, auxiliary outputs, or control outputs. 1 max. (Depends on model. Models with transfer output (F in model number) Current output: 4 to 20 mA DC, Load: 600 max., Resolution at 4 to 20 mA: Approx. 10,Current input: 4 to 20 mA (input impedance: 150 10%) Scaling of signal to engineering units (EU) 19,999 to 30,000 (display: 30,000 max.) (0.2% of FS) 1 digit max. 60 ms Set digitally using keys on the front panel or by using the RSP input. 11-segment digital display and individual indicators (7-segments displays also possible) Character height: E5AN-H: PV: 15.8 mm, SV: 9.5 mm, MV: 6.8 mm; E5EN-H: PV: 11.8 mm, SV: 8.1 mm, MV: 5.8 mm Content of 3-level display: PV/SV/MV, PV/SV/Bank No., or soak time remain Number of digits: 5 for PV and SV, 4 for MV Supported (number of banks: 8) Local SP, alarm settings, PID sets (PID constants, MV upper limit, MV lower limit, etc.) Manual output, heating/cooling control, loop burnout alarm, SP ramp, other alarm functions, heater burnout detection, 40% AT, 100% AT, MV limiter, input digital filter, self-tuning, temperature input shift, run/stop, protection functions, control output ON/OFF counter, extraction of square root, MV change rate limit, PV/SV status display, logic operations, automatic cooling coefficient adjustment 25% to 85% 25 to 65C (with no condensation or icing)

Operations Logic operations Output Work bit assignment Transfer outputs Number of outputs Output specifications Number of inputs Signal type RSP input Analog input scaling Accuracy Input sampling period Setting method Indication method

Bank switching

Other functions
Ambient operating temperature 10 to 55C (with no condensation or icing), for 3-year warranty: 10 to 50C Ambient operating humidity Storage temperature

Input Ranges

Thermocouple/Platinum Resistance Thermometer (Fully Universal Inputs)

Input type Name

100.0 200.0
200.0199.9 100.0 0.0 50.00 199.9 200.0 200.00 100.0 100.0 0.0 20.0 50.00100.0 20.0 50.00 200.0199.9 50.00 200.0 100.0 200.0199.9200.0 0.0 0.0 0.0 0.0 200.00 500.0 500.0 500.0 400.0 200.00 400.0 400.0 200.00 400.0 400.0 600.0 850.0 850.0 850.0 1300.0 1300.0 1300.0 1700.01700.0
Platinum resistance thermometer Pt100 JPt100 K J T
Thermocouple E L U N R S B

1800.0

Analog input W

2300.0

4 to 20 m A

0 to 20 m A

1 to 5V

0 to 5V

0 to 10 V

Temperature range (C)

Usable in the following ranges by scaling: 19999 to 32400, 1999.9 to 3240.0, 199.99 to 324.00, or 19.999 to 32.400

Setting number

Shaded settings are the default settings. The applicable standards for the input types are as follows: K, J, T, E, N, R, S, B: JIS C 1602-1995, IEC 584-1 L: Fe-CuNi, DIN 43710-1985 U: Cu-CuNi, DIN 43710-1985 W: W5Re/W26Re, ASTM E988-1990
JPt100: JIS C 1604-1989, JIS C 1606-1989 Pt100: JIS C 1604-1997, IEC 751 PL II: According to Platinel II electromotive force charts from BASF (previously Engelhard)

Alarm Outputs

Each alarm can be independently set to one of the following 15 alarm types. The default is 2: Upper limit. Auxiliary outputs are allocated for alarms. ON delays and OFF delays (0 to 999 s) can also be specified. Note: For models with heater burnout, SSR failure, and heater overcurrent detection, alarm 1 will be an OR output of the alarm selected from the following alarm types and the alarms for heater burnout, SSR failure, and heater overcurrent. To output only a heater burnout alarm, SSR failure alarm, and heater overcurrent alarm for alarm 1, set the alarm type to 0 (i.e., no alarm function). Set value ***Alarm output operation Alarm type Alarm function OFF Upper- and lower-limit Upper limit Lower limit Upper- and lower-limit range When X is positive Output OFF
ON OFF ON OFF ON OFF L SP X SP X SP L SP L SP H H H

When X is negative

*1. With set values 1, 4 and 5, the upper and lower limit values can be set independently for each alarm type, and are expressed as L and H. *2. Set value: 1, Upper- and lower-limit alarm

Transfer output accuracy 0.3% FS max. Influence of temperature *2 Influence of voltage *2 Input sampling period Hysteresis Proportional band (P) Integral time (I) Derivative time (D) Control period Manual reset value Alarm setting range Affect of signal source resistance Insulation resistance Dielectric strength Vibration resistance Shock resistance Weight
Malfunction 10 to 55 Hz, 20 m/s2 for 10 min each in X, Y, and Z directions Destruction 10 to 55 Hz, 0.75-mm single amplitude for 2 hrs each in X, Y, and Z directions Malfunction 100 m/s2, 3 times each in X, Y, and Z directions Destruction 300 m/s2, 3 times each in X, Y, and Z directions E5AN-H E5EN-H Controller: Approx. 310 g, Mounting Bracket: Approx. 100 g Controller: Approx. 260 g, Mounting Bracket: Approx. 100 g Front panel: IP66, Rear case: IP20, Terminals: IP00 Non-volatile memory (number of writes: 1,000,000 times) CX-Thermo version 4.0 or higher Provided on the bottom of the E5AN-H and E5EN-H. An E58-CIFQ1 USB-Serial Conversion Cable is required to connect the computer to the E5AN-H and E5EN-H. Provided on the front of the E5AN-H and E5EN-H. An E58-CIFIR USB-infrared Conversion Cable is required to connect the computer to the E5AN-H or E5EN-H. *4 UL 61010-1, CSA C22.2 No. 1010-1 EN 61010-1 (IEC 61010-1): Pollution level 2, overcurrent category II
Degree of protection Memory protection Setup Tool Setup Tool port Approved standards Conformed standards

Standards

EMI: EN 61326 Radiated Interference Electromagnetic Field Strength: EN 55011 Group 1, class A Noise Terminal Voltage: EN 55011 Group 1, class A EMS: EN 61326 ESD Immunity: EN 61000-4-2 EMC Electromagnetic Field Immunity: EN 61000-4-3 Burst Noise Immunity: EN 61000-4-4 Conducted Disturbance Immunity: EN 61000-4-6 Surge Immunity: EN 61000-4-5 Power Frequency Magnetic Field Immunity: EN 61000-4-8 Voltage Dip/Interrupting Immunity: EN 61000-4-11 *1. The indication accuracy of K thermocouples in the 200 to 1300C range, T and N thermocouples at a temperature of 100C max., and U and L thermocouples at any temperatures is 2C 1 digit max. The indication accuracy of the B thermocouple at a temperature of 400C max. is not specified. The indication accuracy of B thermocouples in the 400 to 800C range is 3C max. The indication accuracy of the R and S thermocouples at a temperature of 200C max. is 3C 1 digit max. The indication accuracy of W thermocouples is 0.3% of PV or 3C, whichever is greater, 1 digit max. The indication accuracy of PL II thermocouples is 0.3% of PV or 2C, whichever is greater, 1 digit max. *2. Ambient temperature: 10C to 23C to 55C, Voltage range: 15% to 10% of rated voltage *3. K thermocouple at 100C max.: 10C max. *4. External communications (RS-232C, RS-485, or RS-422) and cable communications for the Setup Tool can be used at the same time.
Applicable OS Applicable software Applicable models USB interface standard DTE speed Connector specifications Power supply Power supply voltage Current consumption Ambient operating temperature Windows 2000, XP, or Vista Thermo Mini, CX-Thermo version 4.0 or higher E5AN/E5EN/E5CN/E5CN-U/ E5AN-H/E5EN-H/E5CN-H Conforms to USB Specification 1.1. 38400 bps Computer: USB (type A plug) Temperature Controller: Setup Tool port (on bottom of Controller) Bus power (Supplied from USB host controller.) 5 VDC 70 mA 0 to 55C (with no condensation or icing) 20 to 60C (with no condensation or icing) 10% to 80% 2,000 m max. Accessories (E54-CT3 only)

E58-CIFIR

(2,000) 54
35.8 USB connector (type A plug) 4.6 dia. LED indicator: RD LED indicator: SD
With Mounting Adapter Connected

Mounting Adapter

16 18.5
Mounting Adapter (Accessory)

21.8 (75)

E58-CIFQ1
(2,100) 250 LED indicator: SD 1,765
USB connector (type A plug)

LED indicator: RD

Serial connector

Terminal Covers

E53-COV16 (Six Covers provided.)

1.2 3.2

Y92S-P4 (for DIN 96 96) Y92S-P5 (for DIN 48 96)
Order the Waterproof Packing separately if it becomes lost or damaged. The Waterproof Packing can be used to achieve an IP66 degree of protection. (Deterioration, shrinking, or hardening of the waterproof packing may occur depending on the operating environment. Therefore, periodic replacement is recommended to ensure the level of waterproofing specified in IP66. The time for periodic replacement depends on the operating environment. Be sure to confirm this point at your site. Consider one year a rough standard. OMRON shall not be liable for the level of water resistance if the customer does not perform periodic replacement.) The Waterproof Packing does not need to be attached if a waterproof structure is not required.

Current Transformers

E54-CT1

5.8 dia. 7.5 2.8

E54-CT1 Thru-current (Io) vs. Output Voltage (Eo) (Reference Values)
Maximum continuous heater current: 50 A (50/60 Hz) Number of windings: 4002 Winding resistance: 182
Output voltage (Eo) V (r.m.s.) 100 V Hz

3 10.Two, 3.5 dia.

1 k Distortion factor 10% 3% 1%

100 mV 100 RL = 10

E54-CT3

2.36 dia. dia. 9

V 10 1

100 mA

100 1,000 A
Thru-current (Io) A (r.m.s.)

Two, M3 (depth 4)

E54-CT3 Thru-current (Io) vs. Output Voltage (Eo) (Reference Values)
Maximum continuous heater current: 120 A (50/60 Hz) (Maximum continuous heater current for an OMRON Temperature Controller is 50 A.) Number of windings: 4002 Winding resistance: 80.8
Output voltage (Eo) V (r.m.s.) 100 V Hz 1 k 500

E54-CT3 Accessory

Armature

Approx. 3 dia.

Connection Example

Armature Plug Lead

Distortion factor 10% 3% 1%

100 mV RL = 100 V 10 1

Approx. 6 dia.
Operation for E5@N/E5@N-H

Operation

Setting Levels Diagram
This diagram shows all of the setting levels. To move to the advanced function setting level and calibration level, you must enter passwords. Some parameters are not displayed depending on the protect level setting and the conditions of use. Control stops when you move from the operation level to the initial setting level.

Basic Type

Start in manual mode. Power ON

Start in automatic mode.

Press the O Key or the PF Key for at least 1 s. *4

Operation Level

Adjustment Level Press the O Key less than 1 s.

PF Key

Manual mode
Press the O Key for at least 3 s while a-m is displayed. (a-m will flash after 1st second.)
Monitor/Setting Item Level
Press the O+ M Keys for at least 3 s. (Display will flash after 1st second.)
Press the O+ M Keys for at least 1 s.

Manual Control Level

Press the PF Key for at least 1 s.
Press the O Key for at least 1 s.
Press the O Key for at least 3 s. (Display will flash after 1st second.)

Protect Level

Note: The time taken to move to the protect level can be adjusted by changing the Move to protect level time setting.

Control stops.

Initial Setting Level
Press the O Key for less than 1 s.
Communications Setting Level
Input password while amoV is displayed. (Set value 169)
Advanced Function Setting Level Input password. Control in progress Control stopped Calibration Level
Not displayed for some models Level change
*1. You can return to the operation level by executing a software reset. *2. It is not possible to move to other levels from the calibration level by operating the keys on the front panel. It can be done only by first turning OFF the power. *3. From the manual control level, key operations can be used to move to the operation level only. *4. When the PF Setting parameter is set to A-M for a Controller with a PF Key (E5AN/E5EN). *5. When the PF Setting parameter is set to PFDP for a Controller with a PF Key (E5AN/E5EN).
Error Displays (Troubleshooting)
When an error occurs, the No.1 display shows the error code. Take necessary measure according to the error code, referring the table below.
No.1 display Meaning Input error * A/D converter error Memory error Action Check the wiring of inputs for miswiring, disconnections, and short-circuits and check the input type. Turn the power OFF then back ON again. If the display remains the same, the controller must be repaired. If the display is restored to normal, then a probable cause can be external noise affecting the control system. Check for external noise. Turn the power OFF then back ON again. If the display remains the same, the controller must be repaired. If the display is restored to normal, then a probable cause can be external noise affecting the control system. Check for external noise. Status at error Control output OFF OFF Alarm output Operates as above the upper limit. OFF

s.err (S. Err) e333 (E333) e111 (E111)
Note: If the input value exceeds the display limit (-1999 to 9999), though it is within the control range, will be displayed under -1999 and above 9999. Under these conditions, control output and alarm output will operate normally. For details on the control range, refer to the E5CN/E5AN/E5EN Digital Temperature Controllers User's Manual Basic Type (Cat. No. H156). * These errors are displayed only when the PV/SP is displayed. Errors are not displayed for other displays.
Press the O Key less than 1 s. Press the O Key less than 1 s.

Adjustment Level

Press the O Key less than 1 s.

PID Setting Level

Bank Setting Level
Press the O + M Keys for at least 3 s. (Display will flash after 1st second.)
Press the PF Key for at least 1 s. *4

PF Key *5

Initial Setting Level Press the O Key for at least 1 s.
Input password while amov is displayed. (Set value 169) Advanced Function Setting Level Input password.
Control in progress Control stopped

Calibration Level

*1. You can return to the operation level by executing a software reset. *2. It is not possible to move to other levels from the calibration level by operating the keys on the front panel. It can be done only by first turning OFF the power. *3. From the manual control level, key operations can be used to move to the operation level only. *4. When the PF Setting parameter is set to A-M for a Controller with a PF Key (E5AN-H/E5EN-H). *5. When the PF Setting parameter is set to PFDP for a Controller with a PF Key (E5AN-H/E5EN-H).

(S. Err)

e333 (E333) e111 (E111)
Note: If the input value exceeds the display limit (-19999 to 32400), though it is within the control range, will be displayed under -19999 and above 32400. Under these conditions, control output and alarm output will operate normally. For details on the control range, refer to the E5CN-H/E5AN-H/E5EN-H Digital Controllers User's Manual Advanced Type (Cat. No. H157). * These errors are displayed only when the PV/SP is displayed. Errors are not displayed for other displays.

Parameters

Some parameters are not displayed depending on the model of the Controller and parameter settings. For details, refer to the E5CN/E5AN/E5EN Digital Temperature Controllers User's Manual Basic Type (Cat. No. H156).

0.0 Value Monitor

0.0 SP Ramp

0.0 Upper Limit 2

Heater Burnout

Heater Current 1 Value
Press the O and M Keys for at least 1 s.
Alarm Value Set either of these parameters.
Hysteresis (Heating) Hysteresis settings

0.0 Detection 1

0.0 Monitor

0.0 Lower Limit 2

Heater Overcurrent 50.0 Detection 1

M chys

1.0 Hysteresis (Cooling)
Heater Current 2 Value 0.0 Monitor

Alarm Value 3

Heater Current 2

M soak

Soak Time

Leakage Current 1

M al3h Alarm Value

0.0 Upper Limit 3

Leakage Current 2

M al3l Alarm Value M o

0.0 Lower Limit 3

prst Program Start

MV Monitor (Heating)
Leakage Current 1 0.0 Monitor

MV Monitor (Cooling)

M sprt

SP Ramp Set Value

Valve Opening Monitor
Temperature Input Shift 1-point shift Set either of these parameters.

MV Change Rate Limit

25.0 Monitor/Setting Item Display 1

(E5AN-H/E5EN-H only)

Position Proportional Dead Band Monitor/Setting Item Display 2
Upper Limit Temperature 0.00 Input Shift Value 2-point shift M Lower Limit Temperature

M oc-h

Open/Close Hysteresis

insl M

0.00 Input Shift Value

M sqrp M

Extraction of Square Root 0.0 Low-cut Point
*1. When the PF Setting parameter is set to A-M for a Controller with a PF Key (E5AN-H/E5EN-H). *2. When the PF Setting parameter is set to PFDP for a Controller with a PF Key (E5AN-H/E5EN-H).
Press the O Key for at least 1 s. Press the O Key for at least 3 s. Other than the Auto/Manual Switch display
The time taken to move to the protect level can be adjusted by changing the "Move to protect level time" setting. Level: pmov Move to Protectwhen a password Displayed only
Displayed only for models with communications. Changes are effective after cycling power or after a software reset.

Input Type

0 is set. Restricts moving to protect

level.

Protocol Setting: psel Switches between cwf CompoWay/F (SYSWAY) and Modbus.

M alh2

oapt Restricts displaying and M
Operation/Adjustment Protect:

M in-l

Alarm 2 Hysteresis

Scaling Lower Limit

Alarm 3 Type
modifying menus in 0 operation, adjustment, and manual control levels.
Initial Setting/ Communications Protect: This protect level restricts movement to the initial setting, communications setting, and advanced function setting levels.

u-no M bps M len

Communications Unit No.

icpt M wtpt M

Communications Baud Rate 9.6 CompoWay/F (SYSWAY) only Communications Data Length
Setting Change Protect: Protects changes to setups off by operating the front panel keys. PF Key Protect Restricts PF key operation

pfpt M

M sbit

Communications Stop Bits

1300.0
Transfer Output Upper Limit

off (E5AN-H/E5EN-H only)

Mask Enable: pmsk Parameteronly when a Displayed on parameter mask is set.
Limit the set point M sl-l SP Lower Limit
Transfer Output Lower Limit

-200.0

M prlp
Password to Move to Protect Level: 0 Password setting

M o1-t

Linear Current Output Linear output

Bank Numbers Used

ST (Self-tuning)
For input type of temperature, standard control, or PID Program Pattern

M ptrn

ev-2 Event Input 2 Assignment
Valid Program Bank When assigning PID or control output to ON/OFF output Control Period (Heating) Set the ON/OFF output cycle. Control Period (Cooling)

Event Input Assignment 3

Event Input Assignment 4

Closed/Floating

M calb

Motor Calibration

Travel Time
Extraction of Square Root Enable
M Move to Advanced Function amov Setting Level: initial Displayed when
0 setting/ communications

protect is set to 0.

Press the O Key for at least 1 s. Advanced Function Setting Level

Parameter Initialization

Input Shift Type

Alarm SP Selection

Monitor/Setting Item 1
ret Automatic Display Return Time
MV at Stop and Error Addition

Remote SP Enable

Monitor/Setting Item 2

Standby Sequence Reset

Auto/Manual Select Addition

Remote SP Upper Limit

Monitor/Setting Item 3
Auxiliary Output 1 n-o Open in Alarm

Alarm 2 Latch

Remote SP Lower Limit

Monitor/Setting Item 4

Auxiliary Output 2 n-o Open in Alarm

Alarm 3 Latch

SP Tracking
prlt Move to Protect Level

hsl HS Alarm Latch

Remote SP Input Error Output
"PV/SP" Display

4 Screen Selection

Input Error Output

HS Alarm Hysteresis

PID Set Automatic Selection Data
odsl MV Display Selection

hbl Heater Burnout Latch

Cold Junction

LBA Detection Time

PID Set Automatic Selection Hysteresis

PV Decimal Point Display

on Compensation Method
Heater Burnout Hysteresis
MB Command Logic Switching

LBA Level

PV Dead Band
PV Status Display Function

ST Stable Range

PV Change Color

LBA Band

Manual MV Limit Enable
SV Status Display Function

PV Stable Band

Control Output 1 Assignment

Direct Setting of

Display Refresh Period
off Position Proportional MV

AT Calculated Gain

Alarm 1 ON Delay
PV Rate of Change 17 Calculation Period

AT Hysteresis

Alarm 2 ON Delay

Automatic Cooling

off Coefficient Adjustment

Limit Cycle MV Amplitude

Alarm 3 ON Delay

Heater Overcurrent Use

Input Digital Filter

a1of Alarm 1 OFF Delay

Auxiliary Output 3 Assignment (E5AN/E5EN-H only)

Heater Overcurrent

off Latch

Additional PV Display

a2of Alarm 2 OFF Delay

Character Select

rac ON/OFF Counter Reset

Alarm 3 OFF Delay

Soak Time Unit

PF Setting

Move to Calibration Level
Safety Precautions for E5@N/E5@N-H

Safety Precautions

!CAUTION
Do not touch the terminals while power is being supplied. Doing so may occasionally result in minor injury due to electric shock. Do not allow pieces of metal, wire clippings, or fine metallic shavings or filings from installation to enter the product. Doing so may occasionally result in electric shock, fire, or malfunction. Do not use the product where subject to flammable or explosive gas. Otherwise, minor injury from explosion may occasionally occur. Do not leave the cable for the Support Software connected to the product. Malfunction may occur due to noise in the cable. Do not use the Temperature Controller or Conversion Cable if it is damaged. Doing so may occasionally result in minor electric shock or fire. Never disassemble, modify, or repair the product or touch any of the internal parts. Minor electric shock, fire, or malfunction may occasionally occur. CAUTION - Risk of Fire and Electric Shock a) This product is UL listed as Open Type Process Control Equipment. It must be mounted in an enclosure that does not allow fire to escape externally. b) More than one disconnect switch may be required to de-energize the equipment before servicing the product. c) Signal inputs are SELV, limited energy. *1 d) Caution: To reduce the risk of fire or electric shock, do not interconnect the outputs of different Class 2 circuits. *2 If the output relays are used past their life expectancy, contact fusing or burning may occasionally occur. Always consider the application conditions and use the output relays within their rated load and electrical life expectancy. The life expectancy of output relays varies considerably with the output load and switching conditions. Tighten the terminal screws to between 0.74 and 0.90 Nm. *3 Loose screws may occasionally result in fire. Set the parameters of the product so that they are suitable for the system being controlled. If they are not suitable, unexpected operation may occasionally result in property damage or accidents. A malfunction in the product may occasionally make control operations impossible or prevent alarm outputs, resulting in property damage. To maintain safety in the event of malfunction of the product, take appropriate safety measures, such as installing a monitoring device on a separate line. A semiconductor is used in the output section of long-life relays. If excessive noise or surge is impressed on the output terminals, a short-circuit failure is likely to occur. If the output remains shorted, fire will occur due to overheating of the heater or other cause. Take measures in the overall system to prevent excessive temperature increase and to prevent fire from spreading. Do not allow pieces of metal or wire cuttings to get inside the cable connector for the Support Software. Failure to do so may occasionally result in minor electric shock, fire, or damage to equipment. Do not allow dust and dirt to collect between the pins in the connector on the Conversion Cable. Failure to do so may occasionally result in fire. When inserting the body of the Temperature Controller into the case, confirm that the hooks on the top and bottom are securely engaged with the case. If the body of the Temperature Controller is not inserted properly, faulty contact in the terminal section or reduced water resistance may occasionally result in fire or malfunction. When connecting the Control Output Unit to the socket, press it in until there is no gap between the Control Output Unit and the socket. Otherwise contact faults in the connector pins may occasionally result in fire or malfunction. *1. An SELV circuit is one separated from the power supply with double insulation or reinforced insulation, that does not exceed 30 V r.m.s. and 42.4 V peak or 60 VDC. *2. A class 2 power supply is one tested and certified by UL as having the current and voltage of the secondary output restricted to specific levels. *3. The tightening torque for E5CN-U is 0.5 Nm.

Precautions for Correct Use

Service Life

1. Use the product within the following temperature and humidity ranges: Temperature: 10 to 55C (with no icing or condensation) Humidity: 25% to 85% If the product is installed inside a control board, the ambient temperature must be kept to under 55C, including the temperature around the product. 2. The service life of electronic devices like Temperature Controllers is determined not only by the number of times the relay is switched but also by the service life of internal electronic components. Component service life is affected by the ambient temperature: the higher the temperature, the shorter the service life and, the lower

Mounting

Mounting to a Panel
For waterproof mounting, waterproof packing must be installed on the Controller. Waterproofing is not possible when group mounting several Controllers. Waterproof packing is not necessary when there is no need for the waterproofing function.
Mounting the Terminal Cover E5CN
Make sure that the UP mark is facing up, and then attach the E53COV17 Terminal Cover to the holes on the top and bottom of the Temperature Controller.

E5AN/E5EN

Slightly bend the E53-COV16 Terminal Cover to attach it to the terminal block as shown in the following diagram. The Terminal Cover cannot be attached in the opposite direction.
Order the P2CF-11 or P3GA-11 Socket separately.
E53-COV17 Terminal Cover (Accessory)

Adapter (Accessory)

Slightly bend the E53-COV16 Terminal Cover in the direction shown by the arrows to attach it to the terminal block.

E5CN-U

Waterproof packing (Accessory) Panel
For Front-mounting Socket (Panel mounting is also possible.
1. The Panel Mounting Adapter is also included with the E5CN-U. There is no waterproof packing included with the E5CN-U. 2. Insert the E5CN/E5CN-U into the mounting hole in the panel. 3. Push the adapter from the terminals up to the panel, and temporarily fasten the E5CN/E5CN-U. 4. Tighten the two fastening screws on the adapter. Alternately tighten the two screws little by little to maintain a balance. Tighten the screws to a torque of 0.29 to 0.39 Nm.
E53-COV16 Terminal Cover (Accessory)
Removing the Temperature Controller from the Case
The Temperature Controller can be removed from the case to perform maintenance without removing the terminal leads. This is possible for only the E5CN, E5AN, and E5EN, and not for the E5CN-U. Check the specifications of the case and Temperature Controller before removing the Temperature Controller from the case.

E5EN/E5AN

Mounting Bracket (Accessory)
Tool insertion hole Flat-blade screwdriver (Unit: mm)

(1) (2) (3)

E53-COV16 Terminal Cover (Accessory) Waterproof packing (Accessory) Mounting Bracket (Accessory)

OMRON shall not be responsible for conformity with any standards, codes, or regulations that apply to the combination of products in the customer's application or use of the product. At the customer's request, OMRON will provide applicable third party certication documents identifying ratings and limitations of use that apply to the products. This information by itself is not sufcient for a complete determination of the suitability of the products in combination with the end product, machine, system, or other application or use. The following are some examples of applications for which particular attention must be given. This is not intended to be an exhaustive list of all possible uses of the products, nor is it intended to imply that the uses listed may be suitable for the products: Outdoor use, uses involving potential chemical contamination or electrical interference, or conditions or uses not described in this catalog. Nuclear energy control systems, combustion systems, railroad systems, aviation systems, medical equipment, amusement machines, vehicles, safety equipment, and installations subject to separate industry or government regulations. Systems, machines, and equipment that could present a risk to life or property. Please know and observe all prohibitions of use applicable to the products. NEVER USE THE PRODUCTS FOR AN APPLICATION INVOLVING SERIOUS RISK TO LIFE OR PROPERTY WITHOUT ENSURING THAT THE SYSTEM AS A WHOLE HAS BEEN DESIGNED TO ADDRESS THE RISKS, AND THAT THE OMRON PRODUCT IS PROPERLY RATED AND INSTALLED FOR THE INTENDED USE WITHIN THE OVERALL EQUIPMENT OR SYSTEM.

Disclaimers

CHANGE IN SPECIFICATIONS
Product specications and accessories may be changed at any time based on improvements and other reasons. It is our practice to change model numbers when published ratings or features are changed, or when signicant construction changes are made. However, some specications of the product may be changed without any notice. When in doubt, special model numbers may be assigned to x or establish key specications for your application on your request. Please consult with your OMRON representative at any time to conrm actual specications of purchased product.