HEM-7080IT-E_F_M02_100929.pdf HEM-7080IT-E.book Page 1 Friday, October 1, 2010 11:27 AM
Digital Automatic Blood Pressure Monitor

Model M10-IT

Instruction Manual Mode demploi Gebrauchsanweisung Manuale di istruzioni Manual de instrucciones Gebruiksaanwijzing

EN FR DE IT ES NL RU

IM-HEM-7080IT-E-05-10/2010 1663794-1F
HEM-7080IT-E.book Page 2 Friday, October 1, 2010 11:27 AM

Contents

Before using the unit Introduction... 3 Important Safety Information... 4 1. Overview... 6 2. Preparation... 10
2.1 2.2 Installing/Replacing the Batteries..10 Setting the Date and Time...12
Operating instructions 3. Using the Unit... 16
3.1 3.2 3.3 3.4 3.5 3.6 How to Sit Correctly When Taking a Measurement..16 Applying the Arm Cuff...18 Taking a Reading..21 Instructions for Special Conditions..31 Using the Memory Function...32 Downloading Data to a PC..39
4. Quick Reference Guide.. 40 Care and maintenance 5. Handling Errors and Problems.. 41
5.1 5.2 Error Messages...41 Troubleshooting...42

6. 7. 8. 9.

Maintenance and Storage.. 43 Optional Parts... 44 Technical Data... 45 Some Useful Information about Blood Pressure. 47
HEM-7080IT-E.book Page 3 Friday, October 1, 2010 11:27 AM

Before using the unit

Introduction
Thank you for purchasing the OMRON M10-IT Intellisense Upper Arm Blood Pressure Monitor. The OMRON M10-IT Intellisense is a fully automatic blood pressure monitor, operating on the oscillometric principle. It measures your blood pressure and pulse rate simply and quickly. For comfortable controlled inflation without the need for pressure pre-setting or reinflation the device uses its advanced Intellisense technology. The monitor stores measurement results for two people and features morning and evening averages. The auto mode allows for three consecutive measurements with timed intervals for an average reading. Omrons blood pressure management software included with this unit allows you to view, manage and print data about blood pressure measured by the OMRON M10-IT Intellisense. Included software is in English only. Please read this instruction manual thoroughly before using the unit. For specific information about your own blood pressure, CONSULT YOUR DOCTOR.
HEM-7080IT-E.book Page 4 Friday, October 1, 2010 11:27 AM
Important Safety Information
Consult your doctor during pregnancy, arrhythmia and arteriosclerosis. Use the unit only to store the designated users measurement results. Please read this section carefully before using the unit. Caution: (General Usage) Always consult your doctor. You should never stop or change the dosage of medication prescribed by your doctor. Do not leave the unit unattended with infants or persons who cannot express their consent. Do not use the unit for any purpose other than measuring blood pressure. Use only the approved arm cuff for this unit. Use of other arm cuffs may result in incorrect measurement results. Do not disassemble the unit or arm cuff. Make sure that the air tube is not wrapped around other parts of your body when taking measurements at night. This could result in injury when the air pressure in the air tube is increased. Do not wrap the arm cuff tightly when taking measurements at night. This could result in injury. Do not inflate the arm cuff over 299 mmHg. Do not allow objects to come into contact with the USB connector on the right of the unit when taking measurements. (Optional AC Adapter Usage) Use only the original AC adapter designed for this unit. Use of unsupported adapters may damage and/or may be hazardous to the unit. Plug the AC adapter into the appropriate voltage outlet. Do not overload power outlets or use extension cords. Do not use the AC adapter if the unit or the power cord is damaged. Turn off the power and unplug the power cord immediately.
HEM-7080IT-E.book Page 5 Friday, October 1, 2010 11:27 AM
Never plug in or unplug the power cord from the electric outlet with wet hands. (Battery Usage) If battery fluid should get in your eyes, immediately rinse with plenty of clean water. Consult a doctor immediately. If battery fluid should get on your skin or clothing, immediately rinse with plenty of clean water. Use only four AA alkaline batteries with this unit. Do not use other types of batteries. Do not insert the batteries with their polarities incorrectly aligned. Replace old batteries with new ones immediately. Replace all four batteries at the same time. Remove the batteries if the unit will not be used for three months or more. If the batteries have been removed for more than 30 seconds, the date and time setting will need to be reset. Do not use new and used batteries together. Read and follow the Important information regarding Electro Magnetic Compatibility (EMC) in the Technical Data Section. General Safety Precautions Do not forcibly bend the arm cuff or bend the air tube excessively. EN When removing the air tube, pull on the air plug at the connection with the main unit not the tube itself. Do not apply strong shocks and vibrations to or drop the main unit and arm cuff. Do not inflate the arm cuff when it is not wrapped around your arm. Do not wash the arm cuff or immerse it in water. Do not take measurements after bathing, drinking alcohol, smoking, exercising or eating. Read and follow the Correct Disposal of This Product in the Technical Data Section when disposing of the device and any used accessories or optional parts.

HEM-7080IT-E.book Page 6 Friday, October 1, 2010 11:27 AM

1. Overview

Main Unit

G F B E C D I

H. Battery compartment I. Air jack J. AC adapter jack (for AC adapter)
A. Display B. SET button C. Morning/Evening Average ( / ) buttons D. MEMORY button E. USB connector jack (USB 1.1 compatible) F. O/I START button G. User ID selection switch (A & B)
HEM-7080IT-E.book Page 7 Friday, October 1, 2010 11:27 AM

Arm Cuff

K. Arm cuff (Cuff: arm circumference 22-42 cm) L. Air Plug M. Air Tube
HEM-7080IT-E.book Page 8 Friday, October 1, 2010 11:27 AM

Display

N O P R T Q S U V W Y AA AC X Z AB AD
N. Systolic blood pressure O. Diastolic blood pressure P. Heartbeat symbol 1. (Flashes during measurement) 2. (If flashing after measurement completed indicates blood pressure out of recommended range) Q. Movement symbol (Displayed if you move your body during the measurement.) R. Irregular heartbeat symbol S. Deflation symbol T. Auto mode symbol (Displayed when Auto Mode is set.) U. Battery low symbol
V. User ID symbol (A or B) (Indicates user A or user B as selected by the user to take a measurement or when using the memory function.) W. Pulse display X. Early morning hypertension symbol (Displayed if the morning average reading for a week is above 135 for the systolic blood pressure value and/or 85 for the diastolic blood pressure value.) Y. Morning average symbol (Displayed when viewing morning averages using the memory function.) Z. Evening average symbol (Displayed when viewing evening averages using the memory function.) AA.Average value symbol (Displayed when viewing value for the last three measurements) AB.Memory symbol (Displayed when viewing values stored in memory) AC.Week display AD.Date/Time display
HEM-7080IT-E.book Page 9 Friday, October 1, 2010 11:27 AM

Package Contents

AE.Soft storage bag AF. Four AA alkaline (LR6) batteries AG.USB cable AH.CD-ROM (Blood pressure management software)
Instruction manual Guarantee card Blood pressure pass Blood Pressure Monitor unit Installation guide (for Blood pressure management software)
HEM-7080IT-E.book Page 10 Friday, October 1, 2010 11:27 AM

2. Preparation

2. Preparation 2.1 Installing/Replacing the Batteries
1. Turn the main unit upside down. 2. Slide the battery cover in the
direction of the arrow while pressing the ribbed part of the cover.

HEM-7080IT-E.book Page 13 Friday, October 1, 2010 11:27 AM
4. Repeat steps 2 and 3 to set
the month. The month is set and the day digits flash on the display.
5. Repeat steps 2 and 3 to set
the day. The day is set and the hour digits flash on the display.
6. Repeat steps 2 and 3 to set
the hour. The hour is set and the minutes digits flash on the display.
HEM-7080IT-E.book Page 14 Friday, October 1, 2010 11:27 AM
7. Repeat steps 2 and 3 to set
the minutes. The minutes settings is set. The unit automatically turns itself off after the minute setting has been set. To adjust the date and time, press the SET button while the unit is in standby mode.
Notes on Adjusting the Date and Time Setting
If you need to adjust the date and time for some reason, or if the date and time has been reset after replacing the batteries, adjust the date and time between 10:00 and 18:59. This will avoid problems with morning and evening weekly averages stored in memory. To adjust the date or time at a later stage, start the unit in the off position. Follow the steps below.
1. Press and hold the SET button.
The auto mode symbol and the current setting (on or oFF) will appear on the display for the user ID selected. If the year is not flashing, press the SET button once or twice until the year is flashing. The year flashes on the display.
HEM-7080IT-E.book Page 15 Friday, October 1, 2010 11:27 AM
2. Refer to Chapter 2.2.2 to start setting the date and time.
With this manual setting of date and time the unit needs to be manually shut off. It will not automatically turn off after the minutes have been set. Notes: Please ensure that the date and time have been set correctly so that the weekly averages will be displayed correctly. If the Date/Time settings have been accidentally set incorrectly, press the SET button to circle through the settings in order to adjust to their correct values. In the case where the time displays incorrectly after a long period of non-use of the unit, reset the Date and Time (refer to Chapter 2.2 for instructions on setting the clock values). Erase the recorded values when reusing the unit (refer to Chapter 3.5 for directions on erasing the recorded values).
HEM-7080IT-E.book Page 16 Friday, October 1, 2010 11:27 AM

Operating instructions

3. Using the Unit
3. Using the Unit 3.1 How to Sit Correctly When Taking a Measurement
You can take a measurement on either your left or right arm. Notes: Measurements should be taken in a quiet place and you should be in a relaxed, seated position. Make sure that the room is not too hot or cold. Avoid eating, smoking, or exercising for at least 30 minutes before taking a measurement. Do not move or talk during measurement. Correct Posture
Remove tight fitting clothing from your upper arm, and any thick clothing such as a sweater. Do not place the cuff over thick clothes and do not roll up your sleeve if it is too tight.

Sit upright with your back straight.
Place your arm on a table so that the cuff will be at the same level as your heart.
The gap between the chair and the top of the table should be between 25cm to 30cm.
HEM-7080IT-E.book Page 17 Friday, October 1, 2010 11:27 AM
Notes: Correct posture during measurement is necessary to get accurate results. You should also try to measure your blood pressure at the same time each day. (Within 1 hour after waking up is recommended.) Incorrect Posture
Arched back (leaning forwards) Sitting cross-legged Sitting on a sofa or at a low table so that you tend to lean forward These situations could lead to higher blood pressure values due to strain or the arm cuff being lower than the heart. If the arm cuff is at a lower position than your heart use cushions etc., to adjust the height of your arm.
HEM-7080IT-E.book Page 18 Friday, October 1, 2010 11:27 AM

Applying the Arm Cuff

You can wrap the cuff either on your right or left arm. Remove tight-fitting clothing from your upper arm. Do not place the cuff over thick clothes and do not roll up your sleeve if it is too tight.
1. Insert the air plug into the air jack (on the left side of the

device).

Air jack

Air plug

The cuff must be fully deflated when it is inserted into the air jack.
2. Sit in a chair with your feet flat on the floor and place your arm
on a table so that the cuff will be at the same level as your heart.
HEM-7080IT-E.book Page 19 Friday, October 1, 2010 11:27 AM
3. Hold the grip on the cuff securely

with your hand.

Fabric fastener
4. Turn the palm of your hand upward.
5. Apply the cuff to your upper arm so that the blue strip is centred
on the middle of your inner arm and points down the inside of the arm. The air tube should run down the inside of your forearm and be in line with your middle finger. The bottom of the cuff should be approximately 1 to 2 cm above the elbow.
Bottom edge 1 to 2 cm Blue strip

Air tube

HEM-7080IT-E.book Page 20 Friday, October 1, 2010 11:27 AM
6. When the cuff is positioned correctly,
close the fabric fastener FIRMLY.
Notes: Make certain the cuff fits snugly around your arm. The cuff should make good contact with your skin. You should be able to fit your index finger between the cuff and your arm easily, so you can pull the cuff off and on. Make sure that there are no kinks in the air tubing.

Taking measurements on the right arm
Please note the following points when applying the cuff to your right arm. Apply the cuff so that the air tube is at the side of your elbow. Notes: Be careful not to rest your arm on the air tube, or otherwise restrict the flow of air to the cuff. Apply the arm cuff so that no part of the cuff is positioned over the elbow joint. The cuff should be 1 to 2 cm above the elbow. If used 2 times per day, the cuff will last for 3 years. The blood pressure can differ between the right arm and the left arm, and therefore also the measured blood pressure values can be different. Omron recommends to always use the same arm for measurement. If the values between the two arms differ substantially, please check with your physician which arm to use for your measurement.
HEM-7080IT-E.book Page 21 Friday, October 1, 2010 11:27 AM

Taking a Reading

The unit is designed to take measurements and store the measurement values in the memory for two people using user ID A and user ID B. The unit can also be used to take a single measurement for other persons using the guest mode. The user ID symbol is not displayed when using the guest mode. Measurements taken using the guest mode are not stored in the memory.

Using the Guest Mode

1. Press and hold the O/I START button until the A and B user
symbols disappear from the display.

A and B display goes out

Press for at least 3 seconds
2. Release the O/I START button.
The cuff starts to inflate automatically. Note: To stop the inflation press and release the O/I START button. The unit will stop inflating, start deflation and turn off.
3. Inflation stops and the measurement is started. When the
measurement is completed, your blood pressure and pulse rate appear on the display.
HEM-7080IT-E.book Page 22 Friday, October 1, 2010 11:27 AM

Selecting the User ID

Select your user ID. Always use the same user ID when taking a measurement. The unit stores the measurement values in the memory by the user ID selected. These measurement values are used to calculate the morning averages and evening averages. Slide the user ID selection switch up or down to select user A or B.

Using the User ID

When you select a user ID the unit can be set to take one measurement using the single mode or three consecutive measurements using the auto mode when you press the O/I START button. Note: The default value is set to the single mode to take one measurement. The auto mode takes three consecutive measurements. The unit will inflate the cuff and take three measurements separated by a short interval of time between each measurement.

HEM-7080IT-E.book Page 23 Friday, October 1, 2010 11:27 AM

Using the Single Mode

1. Select your user ID (A or B).
2. Press the O/I START button.
All symbols appear on the display. The user ID symbol you selected flashes on the display. The cuff starts to inflate automatically. As the cuff inflates, the unit automatically determines your ideal inflation level. This unit detects the pulse during inflation. Do not move your arm and remain still until the entire measurement process is completed.
Note: To stop the inflation or measurement, press and release the O/I START button. The unit will stop inflating, start deflating and will turn off.
HEM-7080IT-E.book Page 24 Friday, October 1, 2010 11:27 AM
3. Inflation stops automatically and the measurement is started.
As the cuff deflates, decreasing numbers appear on the display. The heartbeat symbol ( ) flashes at every heartbeat.
4. When the measurement is complete, the arm
cuff completely deflates. Your blood pressure and pulse rate are displayed.
5. Press the O/I START button to turn
the unit off. Note: If you forget to turn the monitor off, it will automatically turn off after five minutes. Notes: Self-diagnosis of measured results and treatment are dangerous. Please follow the instructions of your doctor. Wait 2-3 minutes before taking another blood pressure measurement. Waiting between readings allows the arteries to return to the condition prior to taking the blood pressure measurement.
HEM-7080IT-E.book Page 25 Friday, October 1, 2010 11:27 AM

Selecting the Auto Mode

Auto Mode may be selected for either A or B user.
1. Make sure the unit is powered off. 2. Select your user ID (A or B).
3. Press and hold the SET button.
The auto mode symbol ( the display. ) and the oFF setting appears on
4. Press the MEMORY button (
to select on. Note: Press the MEMORY button to alternate between on and oFF.
HEM-7080IT-E.book Page 26 Friday, October 1, 2010 11:27 AM
5. Press the SET button to confirm the change.
The number of seconds between each measurement is displayed. Note: The default value between each measurement is 60 seconds.
6. Press the MEMORY button (
between each measurement.
) to change the interval of time
The interval can be set to 15 seconds, 30 seconds, 60 seconds or 120 seconds. Continue to press the MEMORY button until the desired interval appears on the display.

7. Press the SET button to confirm the
setting. The year flashes on the display.
8. Press the O/I START button to turn

the unit off.

HEM-7080IT-E.book Page 27 Friday, October 1, 2010 11:27 AM

Using the Auto Mode

1. Select your user ID (A or B). 2. Press the O/I START button.
All symbols appear on the display. The user ID Symbol you selected flashes on the display. The cuff starts to inflate automatically. Note: To stop the inflation or measurement, press the O/I START button. The unit will stop inflating, start deflating and will turn off.
As the cuff deflates, decreasing numbers appear on the display. The heartbeat symbol ( ) flashes at every heartbeat. When the measurement is complete, the arm cuff completely deflates. Note: Do not move your arm and remain still until the entire measurement process is completed.
4. Check the progress of the consecutive measurements.
The first measurement is complete, waiting to start the next measurement. The interval of time set between each measurement will appear on the display.
HEM-7080IT-E.book Page 28 Friday, October 1, 2010 11:27 AM
The second measurement starts automatically.
The second measurement is complete, waiting to start the next measurement. The third measurement starts automatically.
The consecutive measurements are complete. The average for the three measurements appears on the display. The three individual measurement results are not displayed while Auto Mode is taking the measurements. However, the results for each individual measurement can be displayed after all the measurements have been completed. Note: During the Auto Mode the unit will repeat the measurement in case of an error. After 3 errors the unit will stop taking further measurements. If only two measurements are successful the average of these two measurements will be displayed. If only one measurement is successful, this result will be displayed.
5. Press the SET button to display the blood pressure and pulse
rate for the first measurement. Press the SET button again to display the next measurement.

6. Press the O/I START button to turn the unit off.
HEM-7080IT-E.book Page 29 Friday, October 1, 2010 11:27 AM
Important: If your systolic or diastolic pressure is outside the standard range, the heartbeat symbol will blink when the measurement result is displayed. Recent research suggests that the following values can be used as a guide to high blood pressure for measurements taken at home.
Systolic Blood Pressure Diastolic Blood Pressure Above 135 mmHg Above 85 mmHg
This criteria is for home blood pressure measurement. For professional office blood pressure measurement criteria, please refer to Chapter 9. Your blood pressure monitor includes an irregular heartbeat feature. Irregular heartbeats can influence the results of the measurement. The irregular heartbeat algorithm automatically determines if the measurement is usable or needs to be repeated. If the measurement results are affected by irregular heartbeats but the result is valid, the result is shown together with the irregular heartbeat icon. If the irregular heartbeats cause the measurement to be invalid, no result is shown. If the irregular heartbeat symbol ( ) is shown after you have taken a measurement, repeat the measurement. If the irregular heartbeat icon is shown frequently, please make your doctor aware of it.
HEM-7080IT-E.book Page 30 Friday, October 1, 2010 11:27 AM
What is Irregular Heartbeat?
Normal Heartbeat An irregular heartbeat is a heartbeat rhythm that varies Pulse by more than 25% from the Blood pressure average heartbeat rhythm detected while the unit is Irregular Heartbeat measuring the systolic and Short Long diastolic blood pressure. Pulse If such an irregular rhythm is Blood pressure detected more than twice ) during measurement, the irregular heartbeat symbol ( appears on the symbol when the measurement results are displayed.
What is Arrhythmia? A heartbeat is stimulated by electrical signals that cause the heart to contract. Arrhythmia is a condition where the heartbeat rhythm is abnormal due to flaws in the bio-electrical system that drives the heartbeat. Typical symptoms are skipped heartbeats, premature contraction, an abnormally rapid (tachycardia) or slow (bradycardia) pulse. This can be caused by heart disease, aging, physical predisposition, stress, lack of sleep, fatigue etc. Arrhythmia can only be diagnosed by a doctor through a special examination. Whether the appearance of the irregular heartbeat symbol ( ) in the results indicates arrhythmia or not can only be determined by an examination and diagnosis by your doctor. If the irregular heartbeat symbol ( ) is shown frequently, please make your doctor aware of it. Conducting self-diagnosis and treatment based on measurement results is dangerous. Be sure to follow the instructions of your doctor.

HEM-7080IT-E.book Page 37 Friday, October 1, 2010 11:27 AM
Notes on Display Combinations
In addition to the morning average and evening average symbols, the unit may also display the morning hypertension symbol if the morning average for that week is above the home blood pressure guideline. (See Chapter 3 Using the Unit - Important information for details.) Depending on your measurement results, these may be displayed in the following combinations.
Morning Average Morning average from This Week with Morning Average Symbol Morning average from 7 weeks ago with Morning Average Symbol + blinking heartbeat Symbol + Morning Hypertension Symbol
Evening average Evening average from This Week with Evening Average Symbol Evening average from 7 weeks ago with Evening Average Symbol + blinking Heartbeat Symbol + Morning Hypertension Symbol Average above home blood pressure guideline + Morning Hypertension
Average within home blood pressure guideline
HEM-7080IT-E.book Page 38 Friday, October 1, 2010 11:27 AM
The morning hypertension symbol ( ) appears if the weekly average for morning measurements is above 135/85. In this case the morning hypertension symbol ( ) is displayed when the evening average is displayed, regardless of the values for the evening average.
To Delete All Values Stored in the Memory
The values stored in the memory are deleted by user ID. You cannot partially delete values stored in the memory. All values for the user you select will be deleted.
1. Select your ID (A or B). 2. While holding the MEMORY button (
) press the O/I START button simultaneously for more than 2 seconds and all values will be deleted.
HEM-7080IT-E.book Page 39 Friday, October 1, 2010 11:27 AM

Downloading Data to a PC

Omrons blood pressure management software included with this unit allows you to view, manage and print data about blood pressure measured by the OMRON M10-IT Intellisense. Please see attached Installation Guide before installing software onto a PC. To operate the software application, please refer to the Installation Guide and use the help function in the software application. Use only the authorized OMRON USB cable sold with this unit. Use of any other cable may cause damage to the unit and will void the user warranty.
1. Open the USB connector jack

cover.

2. Plug the normal USB connector
plug (large connector) into the personal computer.

Normal USB Connector

Mini USB Connector
3. Plug the mini USB connector
plug (small connector) into the USB connector on the main unit.
HEM-7080IT-E.book Page 40 Friday, October 1, 2010 11:27 AM

4. Quick Reference Guide

Storage

Keep the unit in its soft storage bag when not in use. Note: If you are using the optional AC adapter, make sure that the adapter is placed under the cuff and unit so that it does not damage the display.
HEM-7080IT-E.book Page 44 Friday, October 1, 2010 11:27 AM

7. Optional Parts

AC Adapter S Arm Cuff
Order No. 9515336-9 Order No. 9956685-4
Using the Optional AC Adapter
Insert batteries into the battery compartment even when using the AC adapter. Notes: Never plug in or unplug the power cord from the electric outlet with wet hands. Use only the original AC adapter designed for this unit. Use of unsupported adapters may damage the unit. When storing the AC adapter with the main unit, be careful not to damage the main unit or cuff.
1. Insert the AC adapter plug into
the AC adapter jack on the rear side of the main unit.
2. Plug the AC adapter into an

electrical outlet.

To disconnect the AC adapter, unplug the AC adapter from the electrical outlet first and then immediately remove the AC adapter plug from the main unit.
HEM-7080IT-E.book Page 45 Friday, October 1, 2010 11:27 AM

8. Technical Data

Product Description Model Display Measurement Method Measurement Range Accuracy Inflation Deflation Memory Power Source Battery Life Operating temperature/ Humidity Storage temperature/ Humidity/Air Pressure Console Weight Cuff Weight Outer Dimensions Cuff Dimensions Package Content Digital Automatic Blood Pressure Monitor OMRON M10-IT (HEM-7080IT-E) LCD Digital Display Oscillometric method Pressure: 0 mmHg to 299 mmHg Pulse: 40 to 180/min. Pressure: 3 mmHg Pulse: 5% of display reading Fuzzy-logic controlled by electric pump Automatic pressure release valve 84 Measurements with date and time for each user (A and B) 4 AA batteries 1.5V or AC/ DC adapter (6V = 4W) Capacity of new alkaline batteries is approx. 1400 measurements when used 6 times a day with 4 new alkaline batteries +10C to +40C Maximum: 30 to 90% RH -20C to +60C Maximum: 10 to 95% RH 700 - 1060 hPa Approximately 420g without batteries Approximately 240g Approximately 155 (l) mm 131 (w) mm 84(h) mm Approximately 152 mm 600 mm (Cuff: arm circumference 22 to 42 cm) Cuff, instruction manual, soft storage bag, battery set, guarantee card, blood pressure pass, USB cable, CD-ROM, installation guide

HEM-7080IT-E.book Page 47 Friday, October 1, 2010 11:27 AM
9. Some Useful Information about Blood Pressure
What is Blood Pressure? Blood pressure is a measure of the force of blood flowing against the walls of the arteries. Arterial blood pressure is constantly changing during the course of the heart's cycle. The highest pressure in the cycle is called the Systolic Blood Pressure; the lowest is the Diastolic Blood Pressure. Both pressure readings, the Systolic and Diastolic, are necessary to enable a doctor to evaluate the status of a patient's blood pressure. Why is it a Good Thing to measure Blood Pressure at Home? Having your blood pressure measured by a doctor can cause anxiety which is itself a cause of high blood pressure. As a variety of conditions affect blood pressure, a single measurement may not be sufficient for an accurate diagnosis. Many factors such as physical activity, anxiety, or the time of day, can influence your blood pressure. Thus it is best to try and measure your blood pressure at the same time each day, to get an accurate indication of any changes in blood pressure. Blood pressure is typically low in the morning and increases from afternoon to evening. It is lower in the summer and higher in the winter. EN Blood pressure is measured in millimetres of mercury (mmHg) and measurements are written with the systolic pressure before the diastolic e.g. A blood pressure written as 140/90, is referred to as 140 over 90 mmHg.
HEM-7080IT-E.book Page 48 Friday, October 1, 2010 11:27 AM
200 Upper curve: systolic blood pressure Lower curve: diastolic blood pressure

150 mmHg Time of day

Example: fluctuation within a day (male, 35 years old)
Classification of Blood Pressure by the World Health Organization The World Health Organization (WHO) and the International Society of Hypertension (ISH) developed the Blood Pressure Classification shown in this figure.
Systolic blood pressure (mmHg)
Severe hypertension 180 Moderate hypertension 160 Mild hypertension 140 Normal systolic value Normal blood pressure Optimal blood pressure (target value) 110 Diastolic blood pressure (mmHg)

This classification is based on the blood pressure values measured on people in a sitting position in outpatient departments of hospitals. Note: There is no universally accepted definition of hypotension. However, those having the systolic pressure below 100 mmHg are assumed as hypotensive.
HEM-7080IT-E.book Page 49 Friday, October 1, 2010 11:27 AM

Manufacturer

OMRON HEALTHCARE Co., Ltd. 24, Yamanouchi Yamanoshita-cho, Ukyo-ku, Kyoto, 615-0084 JAPAN

EU-representative

OMRON HEALTHCARE EUROPE B.V. Kruisweg 577, 2132 NA Hoofddorp, THE NETHERLANDS www.omron-healthcare.com
OMRON (DALIAN) CO., LTD. Economic & Technical Development Zone Dalian 116600 CHINA OMRON HEALTHCARE UK LIMITED Opal Drive, Fox Milne Milton Keynes, MK15 0DG U.K.

Production Facility

Subsidiary
OMRON MEDIZINTECHNIK HANDELSGESELLSCHAFT mbH John-Deere-Str. 81a 68163 Mannheim, GERMANY www.omron-medizintechnik.de OMRON Sant France SAS 14, rue de Lisbonne 93561 Rosny-sous-Bois Cedex, FRANCE

Made in China