URC-7960_WEB-manual_ENG_10feb10:URC-7960 12-02-10 10:23 Pagina 1

English

Extra features

Mode Reassignment

How to set up two (or more) devices of the same type.

TV1 page 2

Philips

TV2 Sony

Key Magic
Allows you to obtain functions from your LOST or BROKEN original remote control.
Missing function after Set Up procedure

page 3

e.g. Original LOST or BROKEN remote
Obtain your Missing function through our Customer Service requesting a (5-digit) Key Magic function code. Then, simply follow the procedure from page 3.

Key Magic

Macro
Allows you to send a sequence of commands with the press of a single key.

e.g. Macro on red key

OFF STOP & OFF

page 4

3 and and and mm Comm Comm Co

Macro on red key =

command 1: dvd STOP command 2: dvd OFF command 3: tv OFF
What is my Set Up Code again?
Find out which code is currently set under each of the 6 device modes.

1 blink

1st nr.

My Code is?

5 blinks 2nd nr. :5

page 5

5 blinks

3rd nr.

6 blinks

4th nr.

URC-7960_WEB-manual_ENG_10feb10:URC-7960 12-02-10 10:23 Pagina 2

Mode Reassignment

This feature gives you the possibility to program 2 (or more) of the same device types onto the ONE FOR ALL remote (e.g. two tvs). In the following example you wish to set up an additional television. Therefore we will reassign (change) stb mode into tv mode.
Press and release the magic key.
Select the destination device e.g. stb

< select >

e.g. How to reassign stb into tv so you can control your second televion as well:
--> The Blue ring will light up twice.
Congratulations! You have successfully reassigned stb mode to become a second tv mode.

3 sec.

Press and hold the magic key for 3 sec.
--> The Blue ring will light up twice
Now simply follow ONE FOR ALL SimpleSet, Direct Code Set Up or the Search Method to program your television in stb mode.

Press 2.

Select the source device e.g. tv
How to reset a device mode to its original mode? 1) Press and hold the magic key for 3 sec. --> The Blue ring will light up twice. 2) Press 2. 3) Select the corresponding device mode you wish to reset to its original mode (e.g. select stb). 4) Press the MAGIC key twice. The Blue ring will light up twice.
URC-7960_WEB-manual_ENG_10feb10:URC-7960 12-02-10 10:24 Pagina 3
Key Magic is an exclusive ONE FOR ALL feature. The design of the ONE FOR ALL ensures that many functions of your original remote control can be operated - even those that do not have their own key on the ONE FOR ALL keypad. Frequently used functions can be assigned to a key of your choice using the Key Magic feature of your ONE FOR ALL. In order to program a certain function with Key Magic you need to know the corresponding function code. As the function codes vary with different types of devices, they cannot be found in the manual. You can request your function codes through our consumer service help-line or by letter, fax or e-mail.
When you contact us please make sure to mention the following: The Current code you are using (see What is my Set Up Code again? on page xx). Device-type, Brand & Model-number of the corresponding device. Model-number of the original LOST or BROKEN remote control. How the function was labeled on your original remote control. then; Customer Service will provide you: A funcion-code (5-digit) for every requested function.
Once you obtain your function code(s) from customer service, programming the code is easy:
Example: How to get the I/II (mono/stereo) function from your original LOST or BROKEN remote onto the red key on your ONE FOR ALL remote control. Press 4.

K ey M agic

Enter the 5-digit function-code provided by Customer Service. (e.g. 00123)
Press the key to which the function will be assigned (e.g. red key).
Congratulations! You have successfully programmed the I/II (mono/streo) function from your original remote control onto your ONE FOR ALL remote control. NOW whenever you press the red key (in tv mode) you will obtain the I/II (mono/streo) function.
How to reset a key to obtain its original function? 1) 2) 3) 4) Select the corresponding device mode (e.g. tv). Press and hold magic key for 3 sec. --> Blue ring will light up twice. Press 4. Press the corresponding key (e.g. red) twice.
URC-7960_WEB-manual_ENG_10feb10:URC-7960 12-02-10 10:24 Pagina 4
You can program your ONE FOR ALL to issue a sequence of commands at the press of one single key. Any sequence of commands you regularly use can be reduced to one key press for your convenience. For example, you may want to create the following macro:
1st command: 2nd command: 3rd command:
dvd --> STOP dvd --> OFF tv --> OFF
To set up the Macro mentioned above on the e.g. Red key on your ONE FOR ALL:
Select the corresponding device e.g. tv

3 sec. x2

Press the POWER key

Press 5.

Congratulations! You have successfully programmed a macro on the red key. NOW, when you press the red key: 1st: dvd will STOP, 2nd: dvd switches OFF, 3rd: tv switches OFF. The remote will do this in every device mode whenever you press the red key.
Select the corresponding device e.g. dvd
Press the red key Press the STOP key
d2 m an om d 3 mm C an m Co m Co
Command 1: dvd STOP Command 2: dvd OFF Command 3: tv OFF
Press the POWER key How to reset the macro key to obtain its original function? 1) Press and hold magic key for 3 sec. --> The Blue ring will light up twice. 2) Press 5. 3) Press the corresponding macro key (e.g. the red key). 4) Press and hold magic key for 3 sec. --> The Blue ring will light up twice.
URC-7960_WEB-manual_ENG_10feb10:URC-7960 12-02-10 10:24 Pagina 5
What is my Set Up Code again?
You either set up your ONE FOR ALL by: ONE FOR ALL SimpleSet Direct Code Set Up Search Method
Example! How to find out which Set Up Code is currently set in tv mode:
-> The Blue ring will light up twice
Press 4 for the 4th digit of your 4-digit set up code and count how many times the blue ring lights up. If the blue ring does not light up, the digit is 0.
Congratulations! You have successfully blinked out your current Set Up Code in tv mode.

Press 0.

Your Set Up Codes :
Press 1 for the 1st digit of your 4-digit set up code and count how many times the blue ring lights up. If the blue ring does not light up, the digit is 0.

Press 2 for the 2nd digit of your 4-digit set up code and count how many times the blue ring lights up. If the blue ring does not light up, the digit is 0.

Operational Reset

The Operational reset will erase all learned functions across all modes and some other programmed functions like Key Magic and Macros. 1) Press and hold the magic key for 3 sec. --> The Blue ring will light up twice. 2) Press 0. The Blue ring will light up twice.
Press 3 for the 3rd digit of your 4-digit set up code and count how many times the blue ring lights up. If the blue ring does not light up, the digit is 0.

English

Extra features URC-7140

Mode Reassignment

How to set up two (or more) devices of the same type.

TV1 page 2

Philips

TV2 Sony

Key Magic
Allows you to obtain functions from your LOST or BROKEN original remote control.
Missing function after Set Up procedure

page 3

e.g. Original LOST or BROKEN remote
Obtain your Missing function through our Customer Service requesting a (5-digit) Key Magic function code. Then, simply follow the procedure from page 3.

Key Magic

Macro
Allows you to send a sequence of commands with the press of a single key.

e.g. Macro on red key

OFF STOP & OFF

page 4

3 and and and mm Comm Comm Co

Macro on red key =

command 1: dvd STOP command 2: dvd OFF command 3: tv OFF
What is my Set Up Code again?
Find out which code is currently set under each of the 4 device modes.

My Code is?

page 5

Mode Reassignment

This feature gives you the possibility to program 2 (or more) of the same device types onto the ONE FOR ALL remote (e.g. two tvs). In the following example you wish to set up an additional television. Therefore we will reassign (change) sat mode into tv mode.

TV1 Sony

Press and release the magic key.

< select >

Select the destination device e.g. sat
e.g. How to reassign sat into tv so you can control your second televion as well:

3 sec.

--> The blue LED will blink twice.
Congratulations! You have successfully reassigned sat mode to become a second tv mode.
Press and hold magic for 3 seconds until a mode indicator (Blue LED) stays lit.
Now simply follow ONE FOR ALL SimpleSet, Direct Code Set Up or the Search Method to program your television in sat mode.

Press 2.

Select the corresponding device e.g. TV
How to reset a device mode to its original mode? 1) Press and hold magic for 3 seconds until a mode indicator (Blue LED) stays lit. 2) Press 2. 3) Select the corresponding device mode you wish to reset to its original mode (e.g. select sat). 4) Press the MAGIC key twice. The blue LED will blink twice.
Key Magic is an exclusive ONE FOR ALL feature. The design of the ONE FOR ALL ensures that many functions of your original remote control can be operated - even those that do not have their own key on the ONE FOR ALL keypad. Frequently used functions can be assigned to a key of your choice using the Key Magic feature of your ONE FOR ALL. In order to program a certain function with Key Magic you need to know the corresponding function code. As the function codes vary with different types of devices, they cannot be found in the manual. You can request your function codes through our consumer service help-line or by letter, fax or e-mail.
When you contact us please make sure to mention the following: The Current code you are using (see What is my Set Up Code again? ) Device-type, Brand & Model-number of the corresponding device. Model-number of the original LOST or BROKEN remote control. How the function was labeled on your original remote control. then; Customer Service will provide you: A funcion-code (5-digit) for every requested function. Press and hold magic for 3 seconds until a mode indicator (Blue LED) stays lit.
Once you obtain your function code(s) from customer service, programming the code is easy:
Example: How to get the I/II (mono/stereo) function from your original LOST or BROKEN remote onto the red key on your ONE FOR ALL remote control. Press 4. --> The blue LED will blink twice.

Ma gic

Enter the 5-digit function-code provided by Customer Service. (e.g. 00123)
Press the key to which the function will be assigned (e.g. red key).
Congratulations! You have successfully programmed the I/II (mono/streo) function from your original remote control onto your ONE FOR ALL remote control. NOW whenever you press the red key (in tv mode) you will obtain the I/II (mono/streo) function.
Select the source device e.g. tv

How to reset a key to obtain its original function? 1) Select the corresponding device mode (e.g. tv). 2) Press and hold magic for 3 seconds until a mode indicator (Blue LED) stays lit. 3) Press 4. 4) Press the corresponding key (e.g. red) twice.
You can program your ONE FOR ALL to issue a sequence of commands at the press of one single key. Any sequence of commands you regularly use can be reduced to one key press for your convenience. For example, you may want to create the following macro:
1st command: 2nd command: 3rd command:
dvd --> STOP dvd --> OFF tv --> OFF
To set up the Macro mentioned above on the e.g. Red key on your ONE FOR ALL:
Select the corresponding device e.g.TV

Press the POWER key

Press 5.
Press the key to which the function will be assigned (e.g. red key). Press and hold magic for 3 seconds --> The blue LED will blink twice and then switch off. Congratulations! You have successfully programmed a macro on the red key. NOW, when you press the red key: 1st: dvd will STOP, 2nd: dvd switches OFF, 3rd: tv switches OFF. The remote will do this in every device mode whenever you press the red key.

< select > 3 sec.

Select the corresponding device e.g. DVD

Press the red key

d an d2 m 3 man Com d an m m Co m Co

Press the STOP key

Command 1: dvd STOP Command 2: dvd OFF Command 3: tv OFF
How to reset the macro key to obtain its original function? 1) Press and hold magic for 3 seconds until a mode indicator (Blue LED) stays lit. 2) Press 5. 3) Press the corresponding macro key (e.g. the red key). 4) Press and hold magic key for 3 sec. --> The blue LED will blink twice.
What is my Set Up Code again?
You either set up your ONE FOR ALL by: ONE FOR ALL SimpleSet Direct Code Set Up Search Method
Example! How to find out which Set Up Code is currently set in tv mode:
Press 4 for the 1st digit of your 4-digit set up code and count how many times the LED blinks. If the LED does not blink, the digit is 0.
Congratulations! You have successfully blinked out your current Set Up Code in tv mode.

Press 0.

Your Set Up Codes :
Press 1 for the 1st digit of your 4-digit set up code and count how many times the LED blinks. If the LED does not blink, the digit is 0.

Press 2 for the 1st digit of your 4-digit set up code and count how many times the LED blinks. If the LED does not blink, the digit is 0.

Operational Reset

The Operational reset will erase all learned functions across all modes and some other programmed functions like Key Magic and Macros. 1) Press and hold magic for 3 seconds until a mode indicator (Blue LED) stays lit. 2) Press 0. The blue LED will blink twice.
Press 3 for the 1st digit of your 4-digit set up code and count how many times the LED blinks. If the LED does not blink, the digit is 0.