Your KAMELEON 6 comes with an easy-to-use Macro feature, allowing you to send several commands with the press of a single key (for example turning all your home theatre devices on or off).

Code upgrade technology

Your ONE FOR ALL KAMELEON 6 also offers a Code upgrade technology. This technology gives you the possibility to add codes to the memory. If your device uses a particular code which is not found in the KAMELEON 6 memory (using the Direct code set up on page 6 or the Search Method on page 7) you may use the Code Upgrade Technology (see page 15). Thanks to this technology your KAMELEON 6 will never become obsolete.

Batteries

Your KAMELEON 6 comes with 4 new AAA/LR03 (+ 4 extra) alkaline batteries. 1. 2. 3. Unscrew and remove the battery cover from the back of your KAMELEON 6. Match the batteries to the (+) and () marks inside the battery case, then insert the batteries. Replace the battery cover and tighten the screw.
After re-installing the batteries, the entire EL display will be lit for a duration of 6 seconds after which it will default to the TV mode.

The Keypad

IR (infra-red) Indicator The IR Indicator animates when IR is being sent or received. The KAMELEON 6 animated IR Indicator will show outgoing IR whenever a functional key is pressed. When using the Learning Procedure and upgrading service the animated IR indicator will show incoming IR. The IR Indicator will give feedback (bottom part will blink) when keys are pressed both during normal use and in programming mode the bottom part of the IR indicator will blink.
Device keys The TV, VCR, DVD, SAT, AUD and CD keys select the device to be controlled. For example pressing the TV key allows the remote to control the functions of your Television, after pressing VCR you can operate your Video Recorder, after pressing the SAT key you can operate your Satellite Receiver or Cable Converter etc. (see page 6 for more details). As an added value your KAMELEON 6 features a special animation movement within every device key. After pressing a device (mode) key on your KAMELEON 6 an animated movement will begin, to show the currently activated mode. Pressing the device key will allow you to return to the main screen (TV, VCR, SAT modes).
POWER (in shifted mode; Sleeptimer) The POWER key controls the same function as on your original remote. In shifted mode (accessed by pressing MAGIC shortly and releasing it) the POWER key becomes the Sleeptimer function (see page 12).
4. EL panel with animated screens This product features an EL panel (Electro Luminescence technology) which is motion activated. In order to save battery life, the EL screen will stay illuminated for 10 seconds during normal use. It is also possible to increase or decrease the brightness on the KAMELEON 6 EL panel. To do so, please refer to page 11. One of the key features of the KAMELEON 6 is the EL display, which changes to suit the device you are controlling. The next overview will show you all the possible screens and the functions that you will obtain. TV Mode VCR Mode DVD Mode

Main SAT Mode

Main AUD Mode

Menu CD Mode

Menu/Guide
MAGIC (in shifted or programming mode) The MAGIC key is used to set up your KAMELEON 6 and to access special functions. If you press this key shortly, the screen will go into shifted mode (for 10 seconds). If you press this key longer (about 3 seconds), the KAMELEON 6 will go into programming mode (during programming mode you will see the rabbit icon above the hat). SCROLL The SCROLL key gives you the possibility to move through the different screens (if applicable) within a certain mode during normal use and programming mode. This only applies in TV, VCR and SAT modes. Number keys The number (1 9, 0) keys provide functions just like your original remote. In AUD mode the number keys will provide direct input selection.
8. Back / -/-- / >10 If your original remote uses one/two digit input switching (-/-- symbol), this function can be obtained by pressing the -/-- key. In SAT menu mode you may use the back key to go the previous menu screen. In DVD, CD or AUD mode you will obtain the >10 function.
Info / AV / select The AV key operates the same function it did on your original remote control. Also, if your original remote has a 20 key, this function can be found under the AV key. In SAT mode you can select the info function. In AUD mode the select key will give you the possibility for direct input selection if your original remote has one single key for input selection.

( ) ( )

CH +/- (in shifted mode; brightness +/-) / (in CD mode DISC +/-) These keys operate just as those on your original remote. In CD mode they will function as Disc +/- keys. In shifted TV mode (accessed by pressing MAGIC shortly and releasing it) these keys may provide you the brightness +/- function.
VOL +/- (in shifted mode; colour +/-) The volume keys operate just as those on your original remote. In shifted TV mode (accessed by pressing MAGIC shortly and releasing it) these keys may provide you the colour +/- function.
PP In TV and SAT mode this key may feature the Last Channel, Previous Program or Recall function (depending on your original remote control).
MUTE The Mute key operates the same function it did on your original remote control.
MENU Pressing this key will allow you to operate the Menu and in TV, VCR and SAT mode will change the screen to menu mode. The MENU key operates the same function it did on your original remote control.
AUDIO / GUIDE In DVD mode you will obtain the Audio function. In SAT mode the GUIDE key will change the screen into SAT-menu mode and give you the Guide function, if available on your original remote.

TEXT ON:

HOLD/STOP: MIX: TEXT OFF:

TEXT INDEX:

Red / Green / Yellow / Blue When accessing the text mode, the colour keys marked red, green, yellow and blue, allow you to access the fastext functions of your television. If on your original remote control these keys are used for Menu navigation, the KAMELEON 6 Fastext keys may operate the same.
RANDOM / 16:9 / SUBTITLE In CD and AUD mode you will obtain the RANDOM (or shuffle) function. In TV mode you will obtain the 16:9 (screen format) function. In SAT and DVD mode you will obtain the SUBTITLE function.
FAV / SP/LP / PROG In SAT mode you will obtain the FAV (favourite) function. In VCR mode you will obtain the SP/LP (tape speed) function. In AUD and CD mode you will obtain the PROG (program) function.
TV/SAT / TV/VCR / TV/DVD In SAT mode you will obtain the TV/SAT function. In VCR mode you will obtain the TV/VCR function. In DVD mode you will obtain the TV/DVD function.
Custom keys The custom keys are spare keys that give you the possibility to customize the KAMELEON 6 according to your original remote control using the Learning feature (see page 8) or Key Magic (see page 14). These keys are also ideal for use as Macro keys (see page 13). After having used the Direct Code Set up or Search Method your KAMELEON 6 may also feature standard picked functions on the I, II, III and IV key. These functions may differ per device mode. Please check the table below. Key Device Mode & Function

I II III IV

Display / OSD Angle Title Zoom
Radio / Radio/TV Audio / Language / Sound Help List
DTS / 5.1CH / Prologic DSP, DSP+ Delay + Delay -
Finalize Clear, Cancel Timer Sync.
Setting up the KAMELEON 6

Direct Code Set Up

Example: To set up the KAMELEON 6 for your television: 1
Acura al Admir n Adyso Agazi AGB Agef Aiko

A FOR ONE

3, 0093, 036 0087, 0216 0217, 7, 0087 0009, 003 0216, 7, 003 0208, 037 0361,
Find your device code in the code section (page 113 126). Codes are listed by device mode and brand name. The most popular code for each brand is listed first.
Make sure your television is switched on (not on standby).
Press and release the TV key on your KAMELEON 6.

ssss ssss ssss

Search method
If your device does not respond to the KAMELEON 6 after you have tried all the codes listed for your brand, try searching for your code. The Search Method allows you to find the code for your device by scanning through all the codes contained in the memory of the KAMELEON 6. The Search Method may also work if your brand is not listed at all. Example: To search for your TV code: Switch your Television on (not on standby). Press the TV key on your KAMELEON 6.
Press 1, the bottom part of the animated IR Indicator will light up twice.
Next, press POWER. Aim the KAMELEON 6 at your Television. Now press CH+ over and over, until your Television turns off (everytime you press the CH+ key the KAMELEON 6 will send out a POWER signal from the next code contained in the memory). You may have to press this key many times (up to 150 times) so please be patient. If you skip past a code, you can go to the previous code(s) by pressing the CHkey. Remember to keep pointing the KAMELEON 6 at your Television while pressing this key.
When your Television switches off, press the MAGIC key to store the Code. The bottom part of the animated IR Indicator will light up twice. Now your KAMELEON 6 should be ready to control your television.
Most TVs do not switch on pressing the POWER key. Please try pressing a number key or the TV-text off key to switch your TV back on (you can use the SCROLL key to access this function). If you cannot control your Television properly, please continue the Search Method, you may be using the wrong Code. During step 5, instead of POWER you can also press 0,1, 2, 3, VOL+, PLAY, STOP or MUTE. This will be the function sent for the next key presses of CH+ or CH- in step 6. If for example; during step 5, you press 2 instead of POWER, the KAMELEON 6 will send the number 2 signal every time you press CH+ during step 6 (make sure your TV is switched to an other channel). During step 6, while searching you can sample any of the following keys 0, 1, 2, 3, VOL+, PLAY, STOP, MUTE and thereafter continue the search (CH+ on CH-) with the last function sampled. Pressing CH+ will send the signal from the next code contained in the memory. Pressing CH- will send the signal from the previous code. This can be useful if you missed the code while searching (reversed search). To search for your other devices, follow the same instructions above, only press the appropriate device key during step 2. If your Videos original remote control does not have a POWER key, press PLAY instead of POWER during step 5.
Code blink out (to find out which code is currently programmed)
If you have set up your KAMELEON 6 via the Search Method, you can blink back your code for future reference. Please note that the bottom part of the animated IR Indicator will indicate the 4 digits by animated blink(s). Example: To blink out your television code:

Press the TV key on your KAMELEON 6.
Press and hold down the MAGIC key until the rabbit comes out of the hat.
Press 0, the bottom part of the animated IR Indicator will light up twice.
For the first digit of your four-digit code, press 1 and count the blinks on the bottom part of the animated IR Indicator. If there are no blinks, the digit is 0.
For the second digit, press 2 and count the animated blinks. If there are no blinks, the digit is 0.
For the third digit, press 3 and count the animated blinks. If there are no blinks, the digit is 0.
For the fourth digit, press 4 and count the animated blinks. If there are no blinks, the digit is 0.
To blink back the code for your other devices follow the instructions above, only press the appropriate device key during step 1.

Learning Feature

Learning (direct)
(How to copy functions from your original working remote onto the KAMELEON 6) The KAMELEON 6 comes with a complete library of pre-programmed codes. After you have set up the KAMELEON 6 for your device, you may find that there are one or more keys that you had on the original remote control, which do not have a place on the KAMELEON 6 keypad. The KAMELEON 6 offers a special Learning feature that allows you to copy almost any function from your original remote control onto the keypad of the KAMELEON 6. The custom keys (I IV) have been especially provided for this feature. If you need to learn more than four functions per mode (max. approximately 50 functions), you need to place the function on another key or on a shifted key. Before you start: - Make sure your original remote is working correctly. - Make sure neither your KAMELEON 6, nor your original remote control is pointing at your device. Example: To copy the mono/stereo function from your original TV remote control onto the IV-key of your KAMELEON 6.
Place the KAMELEON 6 and your original remote control on a flat surface. Make sure the ends which you normally point at your device are facing each other. Point the original remote to the front left side of the KAMELEON 6 (see picture below). Keep the remotes at a distance of 2 to 5 cm (0.8 to 2 inches).

(mono/stereo)

Shifted Learning

It is also possible to place a function shifted on a key to maintain the original function. Example: to place the mono/stereo function shifted on the red key. To place a shifted function on a certain key, simply follow steps 1-8 on the previous page, only press MAGIC before starting step 5. To place the (e.g. mono/stereo) function shifted on the red key, simply follow steps 1-8 on the previous page, only press MAGIC then the red key (instead of IV) during step 5. To access the e.g. mono/stereo function in this example; simply press MAGIC then the red key.
If a Shifted Learned function is placed on the POWER, Channel and Volume keys then the Sleeptimer and Colour & Brightness features will be sacrificed. If you place a function shifted on a digit key (0 - 9) you need to press MAGIC twice then the digit key to access this shifted function.
To delete a learned function:

1. 2. 3. 4.

(To delete one single learned function, follow the steps below.) Example: to delete the mono/stereo function learned on the IV key in TV mode: Press and hold the MAGIC key until the rabbit comes out of the hat. Press 6. The bottom part of the animated IR Indicator will blink twice. Press the device key (example TV) in which the function will be deleted. Press the learned key which you want to restore (example IV) twice. The IR Indicator will blink twice. (*)
The original function (if present) of the KAMELEON 6 will be restored. If there is another learned function you want to delete, repeat steps 1 4.
To delete a Shifted learned function:
(To delete one single shifted learned function, follow the steps below.) Example: to delete the mono/stereo function learned shifted on the red key in TV mode: Press and hold the MAGIC key until the rabbit comes out of the hat. Press 6. The bottom part of the animated IR Indicator will blink twice. Press the device key (example TV) in which the function will be deleted. Press MAGIC then press the learned key which you want to restore (example red key) twice. The IR Indicator will blink twice. (*)
The original function (if present) of the KAMELEON 6 will be restored. If there is another Shifted learned function you want to delete, repeat steps 1 4.

To delete all learned functions within a certain mode
Example: to delete all learned functions within the TV mode: 1. 2. 3. Press and hold the MAGIC key until the rabbit comes out of the hat. Press 6. The bottom part of the animated IR indicator will blink twice. Press the mode key in which you want to delete all functions twice. In our example, press TV twice. The IR Indication will light up twice.
To delete all learned functions across all modes:
1. 2. Press and hold the MAGIC key until the rabbit comes out of the hat. Press 0. The IR Indicator will blink four times.
If you follow steps 1 and 2 above this may also delete some other programmed functions that are listed in this manual.

Extra Features

Mode re-assignment (Changing a Device mode)
It is possible to change the mode of any device key. This is useful if you want to set up two of the same devices on the KAMELEON 6. The modified device key will display the applicable keys for the revised mode. The code can be set up using Direct set up (p. 6) or Search method (p. 7). To change a device key, see the two examples below.
Example 1; if you like to program a second TV on the DVD key. Example 2; if you like to program a second VCR on the CD key.
Example 1: To program a second Television on the DVD key (for example), you need to change the DVD key into a TV key, so press: 1. (*) (**)
The DVD key has now become a second TV key and will display the applicable keys for this mode. 2. Now enter the Set-Up code for your second TV by pressing: (*)

(TV Code) (**)

Example 2: To program a second Video Recorder on the CD key (for example), you need to change the CD key into a VCR key, so press: 1. (*) (**)
The CD key has now become a second VCR key and will display the applicable keys for this mode. 2. Now enter the Set-Up code for your second VCR by pressing: (*)

(VCR Code) (**)

Hold down the MAGIC key until the rabbit comes out of the hat.
The bottom part of the animated IR Indicator will blink twice.
The animation (icon) of the device key will stay retained while the mode will change. If you program a different device type on another key (e.g. second TV on the DVD key) the original device key icon will remain, but the function will change to suit the new device mode. For example; if a second TV is programmed on the DVD key, teletext functions will become available in DVD mode.

This feature allows you to adjust the volume in a certain mode (e.g. TV mode) while being in a different mode (e.g. VCR). If for example you're watching a programme on your Video, you can adjust the volume (a TV function) without first pressing the TV key. The chart below lists some of the possibilities: Last key pressed: VCR DVD SAT AUD CD You can control: TV volume up and down, mute TV volume up and down, mute TV volume up and down, mute TV volume up and down, mute TV volume up and down, mute
To punch through to TV volume, being in another mode (VCR, DVD, SAT, AUD or CD mode): 1. 2. 3. Press and hold down the MAGIC key until the rabbit comes out of the hat. Press 3. Then press the TV key and the bottom part of the animated IR Indicator will blink twice.
Example: being in SAT mode, you will be able to control VOL+/- or MUTE functions of your TV.
To cancel the Volume Punch Through per mode:
(Example: to cancel the Volume Punch Through to your CD) 1. 2. 3. 4. Press CD once. Press and hold down the MAGIC key until the rabbit comes out of the hat. Press 3. Then press the VOL (-) key and the animation on the bottom part of the IR Indicator will blink four times.
Example: being in CD mode, you will be able to control VOL+/- or MUTE functions of your CD (provided it has volume control).
To cancel the Volume PunchThrough for all modes:
1. 2. 3. Press and hold down the MAGIC key until the rabbit comes out of the hat. Press 3. Then press the VOL (+) key and the animation on the bottom part of the IR Indicator will blink four times.
In all modes the VOL+, VOL- and MUTE keys will now operate the original functions again. Volume Punch-Through does not apply for modes that have been changed by mode re-assignment (see page 10).

Sleeptimer

Device Sleeptimer
If your television, satellite receiver, audio or CD player has a Sleeptimer function built in, you can access this function with your KAMELEON 6 remote. To do so: 1. 2. 3. Make sure your TV (or satellite receiver, audio or CD player) is switched on. Press the device key TV (or SAT, AUD or CD). Point the KAMELEON 6 at your television (or satellite receiver, audio or CD player) and press and release the MAGIC key then press POWER. You should see the Sleeptimer activate on your TV screen.

Each MACRO can consist of a maximum of 15 keystrokes. To include a function from a particular screen in a mode, use the SCROLL key. Make sure that you program a Macro on a spare key that you dont use in any mode. Once you program a Macro on a specific key, the sequence will work regardless of the mode (TV, VCR, SAT, CD, AUD or DVD) you are using. This means that the function picked on that specific key will be sacrificed. To avoid accidental recordings with the KAMELEON 6, you must press the RECORD key twice to begin recording. Please note that if you assign a Macro or Shifted Macro on the RECORD key this will deactivate the double key press. Therefore we recommend not to assign a Macro to this key. If you had to hold down a key for a few seconds on the original remote control to get a function, this function may not work in a macro on your KAMELEON 6 remote. Keys such as (TV) text, (TV) menu etc. will not change screen when pressed during Macro programming. Upon changing the batteries your Macros will be retained. If you program a Macro on a key, the original function will become shifted (excluding POWER, CH+/- and VOL+/- keys). Press MAGIC then the key to access it. If you place a Macro shifted on a digit key, access the original function by pressing MAGIC twice and then the digit key. You can replace a Macro by placing another Macro on top.
Extra Features Shifted Macros
It is also possible to place a shifted Macro on a key to maintain the original function. If for example, you want to program a shifted Macro on the red Key (so that you will keep the original function on that key). Please follow steps 1-6 on the previous page. Simply press MAGIC once then the red key (instead of IV) during step 3 on the previous page. Now every time you press MAGIC, then red key, the KAMELEON 6 will turn off your TV, VCR and Satellite.
If a Shifted Macro is placed on the POWER, CH+/- or VOL+/- keys, the Sleeptimer and Colour/Brightness features will be sacrificed.
To erase a (direct) Macro
Exemple: To erase the Macro from the IV key, press: MAGIC * 995 IV MAGIC **
To erase a (shifted) Macro
Exemple: To erase the Shifted Macro from the red key press: MAGIC * 995 MAGIC red key MAGIC**
Here you must hold down MAGIC until the rabbit comes out of the hat. Here you must hold down MAGIC until the IR Indicator will blink twice and the rabbit will disappear.

Key Magic

(How to program missing functions) Key Magic is an exclusive ONE FOR ALL feature. The design of the KAMELEON 6 ensures that many functions of your original remote control can be operated - even those that do not have their own key on the KAMELEON 6 keypad. Frequently used functions can be assigned to a key of your choice using the Key Magic feature of your KAMELEON 6. In order to program a certain function with Key Magic you need to know the corresponding function code. As the function codes vary with different types of devices, they cannot be found in the manual. You can request your function codes through our consumer service help-line, by letter, fax or e-mail. All we need to know is the 4-digit set-up code your device is working with and how the function was labelled on your original remote control. You can also visit our website

(www.oneforall.com) to find an answer to your questions.
Once you obtain(ed) your function code(s) from customer service, programming the code is easy: 1. 2. 3. 4. 5. 6. Press the device key (TV, VCR, SAT, CD, AUD or DVD). Press and hold the MAGIC key until the rabbit comes out of the hat. Press 4. The bottom part of the IR Indicator will blink twice. Press the MAGIC key once. Enter the 3-digit function code (provided by customer service). Press the key to which the function will be assigned (if this key is located in a different screen than the main screen, use the SCROLL key to access the screen). The IR Indicator will blink twice.
EXTENDED FUNCTION REFERENCE (first entry is an example): DEVICE TV SET-UP CODE 0556 FUNCTION 16/9 format FUNCTION CODE 234
As Key Magic functions are mode specific, to access the function you have programmed, press the device key first. Key Magic can be assigned to any key EXCEPT the following: Device keys, MAGIC key and the SCROLL key. The Custom Keys (I, II, III, IV) are spare keys, which can be used for programming Key Magic functions. If you need more than four keys, make sure you program your extended function on a spare key in the device mode you are using. Please note all the extended function codes you obtain from customer service for easy future reference. The SCROLL key can be used to assign a function to a key in a particular screen. Keys such as (TV) text, (TV) menu etc. will not change screen when pressed during Key Magic programming.

Code Upgrade Technology

Your KAMELEON 6 contains a unique feature, which allows new codes to be added to the memory: either by Internet or over the phone. In a matter of seconds, our magnetic coupling technology quickly and reliably transfers information to the KAMELEON 6 without complex plugs, adapters or connectors. This means, as you buy new products in the future, the KAMELEON 6 will never become obsolete. Simply visit our website or ring our consumer help-line and one of our customer service representatives will assist you through the entire process of upgrading your KAMELEON 6. To ensure the process goes smoothly, here are a few steps to follow:
Code upgrade through internet download.
Instructions for start up: 1. 2. 3. 4. 5. 6. Visit our website www.oneforall.com. Select your region. Select Product support. Select Universal Remote Controls. Select the ONE FOR ALL remote you want to upgrade: ONE FOR ALL KAMELEON 6 (URC-8060). Select Internet Download.

0217 0009

1610729
Sandra Sanela Sansui Santon Sanyo

0556 0486

1610745 1610746
Save SBR Schaub Lorenz Schneider

0163 0714

1611324 1610753

Scotland Scott Sears SEG

1610754

0556 WWW.ONEFORALL.COM

1612289 1610854
Sei-Sinudyne Seleco Sencora Sentra Serino Sharp Shintoshi Shivaki Siarem Siemens Siera Siesta Silva Silver Singer Sinudyne Skantic Sky Skymaster Skysonic SLX Smaragd Sogera Solavox Sonawa Soniko Sonitron Sonneclair Sonoko Sonolor Sontec Sony Sound & Vision Soundesign Soundwave Ssangyong Standard Starlite Stenway Stern Strato Stylandia Sunic Line Sunkai Sunstar Sunwood Superla SuperTech Supra Susumu Sutron Swissline Sydney Sysline Sytong T+A Tandberg Tandy Tashiko Tatung TCM Teac

0282 0418

1610891
Technics TechniSat Tedelex Teiron Teleavia Telecor Telefunken Telefusion Telegazi Telemeister Telesonic Telestar Teletech Teleton Televideon Teleview Tempest Tennessee Tensai

1610897

Tenson Tevion Texet Thomson Thorn

1610929

Thorn-Ferguson TMK Tokai Tokyo Tomashi Toshiba Towada Toyoda Trakton Trans Continens Transonic Transtec Triad Trident Tristar Triumph Tsoschi TVTEXT 95 Uher Ultravox Unic Line United Universum

0631 0009

1610954 1610956
Univox Utax Vestel Vexa Victor Videologic Videologique Videosat VideoSystem Videotechnic Videoton Vidtech Visiola Vision Vistar Vortec

1612107 1610856

TEC Tech Line Techica Technema

0218 0320

1610984 1611219
Voxson Waltham Watson Watt Radio Wega Wegavox Weltblick Weston Wharfedale

1620210 1620216

Combitech Condor Crown Cyrus Daewoo Dansai Daytron de Graaf Decca Deitron Denko Diamant Dual Dumont Elbe Elcatech Elin Elsay Elta Emerson ESC Etzuko Ferguson Fidelity Finlandia Finlux Firstline Fisher Frontech Fujitsu Funai Galaxi Galaxis GEC General Technic Genexxa Goldhand GoldStar Goodmans Graetz Granada Grandin Grundig Haaz Hanimex Hanseatic Harwood HCM Hinari Hisawa Hischito Hitachi Hornyphone Hypson Imperial Ingersoll Inno Hit Interbuy Interfunk Internal International Intervision Irradio ITT ITT Nokia ITV JMB

1620263 1620265

White Westinghouse Windstar Xrypton Yamishi Yokan Yoko Yorx Zanussi Zenor 0339
Video Recorders Videorecorder Magntoscopes Vdeos Vdeo Gravadores Videoregistratori Videorecorders
1620172 Adyson Aiwa Akai Akiba Akura Alba Allorgan Allstar Amstrad Anitech Aristona ASA Asuka Audiosonic AVP AWA Baird Bang & Olufsen Basic Line Bestar Black Panther Blaupunkt Blue Sky Bondstec Brandt 0278 0352

ABsat Adcom AGS Akai Akena Alba Allsat Allsonic Alltech Alpha Altai Amitronica Ampere Amstrad Anglo Ankaro AntSat Apollo Arcon Armstrong Asat ASLF AssCom Astacom Aston Astra Astro Athena 0396 0713

1630299 1630301

0455 0108

1630485

Finlux Flair Mate Force Foxtel Fracarro Freecom FTEmaximal Fuba Fugionkyo Galaxis Garnet GF GF Star GOD Digital Goldbox Goldvision Gooding Goodmans Gradiente Granada Grandin Grundig Hanseatic Hnsel & Gretel HDT Heliocom Helium Hirschmann Hitachi HNE Houston Humax Huth Hyundai ID Digital Imex Ingelen International Interstar Intervision Invideo Italtel ITT ITT Nokia JVC K-SAT Kamm KaTelco Kathrein Kathrein Eurostar Key West Kiton Klap Konig Koscom Kreiling Kreiselmeyer Kyostar L&S Electronic LaSAT Lenco Lenson Lexus Lifesat Lorenzen Lupus Luxor

1176 0863

1630580 1630582
M&B1 Manata Manhattan Marantz Maspro Matsui Max MB Mediabox Mediacom MediaSat Medion Medison Mega Metronic Metz Micro Micro electronic Micro Technology Micromaxx Microtec Minerva Mitsubishi Morgan's Multichoice Myryad Mysat Neuhaus Neusat Nikko Nokia Nordmende Nova Okano OnDigital Optex Optus Orbitech Origo OSAT Oxford Pace Palcom Palladium Palsat Panasat Panasonic Panda Patriot Philips Phonotrend Pioneer Planet Polytron Preisner Premier Premiere Primacom Profile Promax Prosonic Pye Pyxis Quadral Quelle Radiola Radix

0455 0455

0573 0501

1630687

1630929
Red Star RFT Roadstar Rover Saba Sabre Sagem Salora Samsung SAT Sat Partner Sat Team Satcom Satec Satelco Satstation Schneider Schwaiger SCS Seemann SEG Seleco Septimo Siemens Skantin Skinsat SKR Sky Skymaster Skymax SkySat SL SM Electronic Smart Sony Starland Strong Sunny Sound Sunsat Sunstar Tantec Tatung TechniSat Technowelt Techsan Techwood Telasat Teleciel Telecom Teleka Telesat Telestar Teletech Televes Thomson Thorn Tokai Tonna Topfield Toshiba TPS Triasat Triax Twinner UEC Unisat Universum

0132 0742

1632341 1630990
Van Hunen Variosat Vega Ventana Vestel VH-Sat Videocrypt Visionic Visiosat Wela Wetekom Wewa Wisi Worldsat XCOM Xrypton XSat Zehnder Zenith Zeta Technology Zinwell Zwergnase
Cable Converters Kabeldecoder Dcodeurs de cble Decodificadores Conversores de Cabo Convertitori di reti Kabel Decoders
Austar BT Canal Plus Comcrypt Decsat Filmnet France Telecom 0451 0817
General Instruments 0276 HyperVision Jerrold Kabelvision Macab Melita MNet Mr Zapp Noos NTL Cabletell Oak Ono Optus Pace Philips PVP Stereo Visual Sagem Tele+1 Teledanmark Telepiu Tudi United Cable Visiopass 0817

1640585

NSM Optimus Panasonic Philips Pink Triangle Pioneer Proton QED Quad Radiola Radiotone RCA Realistic Revox Rotel SAE Sansui Sanyo Sharp Siemens Sony SuperTech Synergy Tandy Teac Technics Thorens Thule Traxdata Universum Victor Wharfedale Yamaha

URC-7562 701922

UK D F

Universal remote

ZAPP ONE

Table of Contents
PICTURE OF ONE FOR ALL 6 REMOTE INSTALLING THE BATTERIES THE KEYPAD INSTALLATION Setting up your devices The Search Method CHANGING A DEVICE KEY QUICK CODE REFERENCE ADVANCED FEATURES Colour and Brightness Volume Punch-Through Auto Scan Favourite Programme Scan Device Sleeptimer ONE FOR ALL Sleeptimer Macros The Learning Feature Home Theater Key Magic Telephone Upgradable Technology / Internet Download TROUBLE-SHOOTING Helpful Hints Customer Service

About Your ONE FOR ALL 6

Your ONE FOR ALL 6 Package contains: Your ONE FOR ALL 6 Remote Your ONE FOR ALL 6 Manual Your ONE FOR ALL 6 Codelist You may need this guide again in the future, so please be sure to keep it. Your ONE FOR ALL 6 needs 2 new AA/LR6 batteries. Your ONE FOR ALL 6 is designed to let you use one remote to operate your Video and Audio equipment; any device designed to be operated by an infrared signal. This also includes those devices, which operate over 100 kHz. You can choose any combination of six devices you would like to operate. Also, what makes the ONE FOR ALL 6 even more unique is the "Learning" feature, which allows you to customise any of the special functions of your original remote control onto the keypad of your new ONE FOR ALL 6. The following pages explain in simple steps how to customise the ONE FOR ALL 6 to your home entertainment needs.

WWW.ONEFORALL.COM

Installing the Batteries
Your ONE FOR ALL 6 needs 2 new AA/LR6 alkaline batteries. 3 Remove the battery cover from the back of your ONE FOR ALL 6 by pressing down on the tab. Match the batteries to the + and - marks inside the battery case, then insert the batteries. Press the battery cover back into place.
Important notes: - On the inside of the battery compartment door you will find a label on which to write your Set-Up codes after your ONE FOR ALL 6 is set up for your device. Please write down your codes for easy, future reference. - Do not use rechargable batteries. - Upon changing the batteries, your set-up codes and advanced programming will be retained.

The Keypad

See picture of ONE FOR ALL 6 remote on page 3.
MAGIC Key The MAGIC key is used to set up your ONE FOR ALL 6 and to access special functions. MENU Key The MENU key controls the same function as it did on your original remote. If available on your original remote control, this key will also allow you to access the Surround mode of your device. POWER Key The POWER key controls the same function as it did on your original remote. HOME THEATER Key This key is used to select the Home Theater mode of the ONE FOR ALL remote control. See page 15 for more information. Backlit Device Keys The TV, VCR, SAT, CD, AUD and DVD keys select the home entertainment device to be controlled. For example pressing the TV key allows the remote to control the functions of your Television, after pressing VCR you can operate your Video Cassette Recorder, etc. For more detailed information, please refer to the chart on page 6. During operation of the ONE FOR ALL the device key will light up to indicate the mode you are using. Number Keys The Number keys (0-9, 10, 20 (AV)) provide functions just like your original remote. If your original remote uses one/two digit input switching (-/-- symbol), this function can be obtained by pressing the -/-- key, which is the same as the 10 key. If your original remote has a 20 key this function can be found under the AV key. AV The AV key operates the same function it did on your original remote control. Also, if your original remote control required that you press an EXIT key during Menu operation, the AV key can be used for this function. In VCR mode it obtains the TV/VCR function. Directional Keys If available on your original remote, these keys will allow you to navigate through the menu and the Surround Sound mode of your device.
Programme (Channel) +/- Keys These keys operate in the same way as the keys on your original remote. Mute Key (OK/Enter in Menu operation) The Mute key operates the same function it did on your orginal remote control. It is also used to activate the Auto Scan feature (see page 9). Also, if your original remote control required that you press an OK or ENTER key during Menu operation, the Mute key can be used for this function. Volume +/- Keys These keys operate in the same way as the keys on your original remote. Video Recorder Keys After pressing the VCR key, the Video Recorder keys operate the functions of your Video Recorder. To prevent accidental recordings, the Record key must be pressed twice to start recording. The SP/LP key controls the tape speed function, the AUTO key controls the auto tracking function, just like on your original remote. Teletext and Fastext Keys After pressing the TV key, the top row of the VCR keys is used to operate the main Teletext functions. The symbols below the keys are for Teletext. The text keys are used to access the Teletext functions of your television. Of course, your television must have Teletext capability. TEXT ON: Puts the television in the Teletext mode. TEXT OFF: Switches the television back to regular viewing mode. On some televisions, this may be done by pressing the TEXT ON key several times. HOLD/STOP: Stops changing pages. EXPAND: Shows the top half of the Teletext page in larger letters. By pressing again, you can see the bottom half of the Teletext page enlarged. To return to regular Teletext viewing, press the EXPAND key again, or press the TEXT ON key, depending on your television.

After pressing the TV key and accessing the text mode, the bottom row of the Video Recorder keys marked red, green, yellow and blue, allow you to access the Fastext functions of your television. If on your original remote control these keys are used for Menu navigation, the ONE FOR ALL Fastext keys may operate in the same way.
Important note: For a more detailed explanation of Teletext and Fastext, please refer to the manual of your television. Remember, different televisions control Teletext and Fastext features in different ways. Not all of the Teletext functions may be available for your particular model.
Custom keys The Custom Keys are spare keys which give you the possibility to customise the ONE FOR ALL remote using the learning and Key Magic features (page 13 and 17). These keys can also be used to program Macros (see page 12).
For your convenience, the ONE FOR ALL 6 comes with an adhesive overlay to label the custom keys.

Installation

Before you start, please read these instructions carefully

Setting Up Your Devices

Example: To set up the ONE FOR ALL 6 for your television: 1
Acura al Admir n Adyso Agazi AGB Agef Aiko

A FOR ONE

3, 0093, 036 0087, 0216 0217, 7, 0009, 003 0216, 0037, 0208, 037 0361,
Find the code for your device in the Code list. Codes are listed by device type and brand name. The most popular code is listed first. Make sure your device is switched on (not on standby). Press the TV key on the ONE FOR ALL 6 for the device you wish to Set-Up. Press and hold down MAGIC until the device key blinks twice. (The device key will blink once and then twice.)
Enter your four-digit device code using the number keys. The device key will blink twice. Now, aim the ONE FOR ALL 6 at your device and press POWER. If your device switches off, the ONE FOR ALL 6 is ready to operate your device.
Turn your device back on and try all the remotes functions to ensure they are working properly. If the functions do not work properly, repeat steps 1-5 using another code listed under your brand. If your device does not respond, follow steps 1 to 5 with each code listed for your brand. If none of the codes listed for your brand operate your device, or if your brand is not listed at all, try the search method described on page 7. Write your code in the four boxes provided in the battery compartment and on page 8 for easy future reference.

Important notes: - Some codes are quite similar. If your device does not respond or is not functioning properly with one of the codes, try another code listed under your brand. - If your devices original remote control does not have a POWER key, press PLAY instead of POWER when setting up your device. - Remember to press the correct device key before operating your device. Only one device (CD, amplifier, cassette, etc.) can be assigned to a device key. If your original remote operates more than one device (for example, a receiver, CD player and cassette player in one remote), you need to set up each device separately.
Devices can be found under the following keys: Television Video Recorder Satellite Receiver / Cable Converter
Digital Versatile Disc (DVD) / Laser Disc Player / Audio Cassette Player / Digital Audio Tape
Audio Amplifier / CD Player / Mini Disk Player Tuner / Miscellaneous Audio / Phonographs To set up a second TV, VCR, SAT, CD, AUD or DVD see page 8.

The Search Method

If your device does not respond to the ONE FOR ALL 6 after you have tried all the codes listed for your brand, try searching for your code. The Search Method allows you to find the code for your device by scanning through all the codes contained in the memory of the ONE FOR ALL 6. The Search Method may also work if your brand is not listed at all. Example: To search for your TV code: 3
Switch your television on (not on standby) and aim your ONE FOR ALL at your TV. Press the TV key on your ONE FOR ALL 6. Press and hold down MAGIC until the ONE FOR ALL 6s TV key blinks twice (The TV key will blink once and then twice). Press 1. The TV key will blink twice. Now slowly, alternate between TV and POWER, over and over, until your television turns off. You may have to press these keys many times (up to 200!), so please be patient. Remember to keep pointing the ONE FOR ALL 6 at your television when you press these keys. As soon as your television turns off, press MAGIC to store the code.
The ONE FOR ALL remote should now be ready to operate your device. Turn your device back on and try all the remotes functions to ensure they are working properly. If some of the ONE FOR ALLs commands are not operating correctly, try the search method again. You may be using the wrong code.

Important notes: - To search for the code for another device follow the instructions above only press the appropriate device key instead of TV during steps 2 and 5. - If the original remote control of your device does not have a POWER key, press PLAY instead of POWER during step 5.
Once you have Set-Up your ONE FOR ALL 6, you can blink back your SET-UP CODE for future reference. Example: To blink out your Television code: 3 4
Press TV once. Press and hold MAGIC until the ONE FOR ALL 6s TV key blinks twice (The TV key will blink once and then twice). Press 0. The TV key will blink twice. For the first digit of your four-digit code, press 1 and count all the red blinks. If there are no blinks, the digit is "0". For the second digit, press 2 and count all the red blinks. If there are no blinks, the digit is "0". For the third digit, press 3 and count all the red blinks. If there are no blinks, the digit is "0". For the fourth digit, press 4 and count all the red blinks. If there are no blinks, the digit is "0". Now you have your four-digit code.
Make sure you write your Television code in the boxes provided in the battery compartment and on page 8 for easy future reference.
Important note: To blink back the code for your other devices press the appropriate device key during step 1.

Changing a Device Key

It is possible to change any device key. Example 1: To program a second Television on the DVD key (for example), you need to change the DVD key into a TV key, so press: 1 (*) (**) The DVD key has now become a second TV key.
Now enter the SET-UP code for your second TV by pressing: (*) _ _ _ _ (4-digit TV SET-UP code) (**)
Example 2: To program a second Video recorder on the CD key (for example), you need to change the CD key into a VCR key, so press: 1 (*) (**) The CD key has now become a second VCR key.
Now enter the SET-UP code for your second VCR by pressing: (*) _ _ _ _ (4-digit VCR SET-UP code)(**)

(*) (**)

Hold down the MAGIC key until the device key blinks twice (the device key will blink once then twice). The device key blinks twice.

Resetting a Device Key

Example: To reset the DVD key press: (*) (*) (**)

DVD DVD

Quick Code Reference
Write down the codes for your devices in the boxes below and in the battery compartment for quick and easy reference. Device Type 1._________________________ 2._________________________ 3._________________________ 4._________________________ 5._________________________ 6._________________________
ssss ssss ssss ssss ssss ssss
Advanced Features Colour and Brightness
Depending on the functions of your original remote control, the ONE FOR ALL may operate the colour and brightness settings of your television. Colour (+) Colour (-) = Press and release MAGIC then hold Volume (+) = Press and release MAGIC then hold Volume (-)

Brightness (+) = Press and release MAGIC then hold Channel (+) Brightness (-) = Press and release MAGIC then hold Channel (-)
Note: You have 5 seconds to press the Volume or Channel keys for colour or brightness adjustment after pressing MAGIC.

Volume Punch-Through

You may be able to use some features of your Television, Video Recorder and Satellite Receiver at the same time. If you're watching a programme on your Video, you can adjust the volume (a TV function) without first pressing the TV key. The chart below lists some of the possibilities: Last Key Pressed: VCR SAT You Can Control: TV volume up and down, mute TV volume up and down, mute
To punch through to TV Volume while in VCR, SAT or DVD mode press: MAGIC* 3 TV key. To punch through to AMP/TUN Volume while in CD mode press: MAGIC* 3 AUD key. To cancel the Volume Punch Through press: MAGIC* 3 Volume(+) (a device key will blink four times). * Here you must hold down MAGIC until the device key blinks twice.

Auto Scan

Your ONE FOR ALL 6 comes with a special Auto Scan function which lets you scan through every programme available on your device. For example, to scan the programmes on your TV: 1 Aim the ONE FOR ALL 6 at your TV. Press the TV key. Press and release MAGIC then press the MUTE key. The ONE FOR ALL 6 will send the command to advance through all the programmes available on your Television stopping at each programme for about three seconds. Remember, you must aim the ONE FOR ALL at your device the entire time you are using Auto scan. 2 When you find a programme you would like to watch, simply press any key on the ONE FOR ALL key pad to stop the Auto Scan feature.
Important note: Auto Scan may not work with devices that did not have programme +/- keys on the original remote control.

Favourite Programme Scan

Instead of Auto Scan, you can set your ONE FOR ALL 6 to scan through up to 10 of your favourite programmes. To set up your favourite programmes for your TV: Press and release the ONE FOR ALL 6s TV key. Hold down the MAGIC key until the TV key blinks twice (the TV key will blink once then twice). Press 6. Enter the number for the first programme you wish to be included as a favourite programme. Then press and release MAGIC. (You must enter the programme number exactly as you would on your original remote. Example: If to get programme 5 you had to press 05 or if you used the 10, 20 or -/-- keys, you will need to do the same on the ONE FOR ALL 6.) Enter the next programme number you wish to be included as a favourite programme. Then press and release MAGIC. Continue entering each programme you wish to be included as your favourite programmes. After you have entered the last programme number, press and hold down MAGIC until the TV key blinks twice. Remember, the ONE FOR ALL 6 can hold a maximum of 10 of your favourite programmes. After you have entered the 10 favourite programmes it will automaticallly exit the Favourite Programme Scan. When you want to scan through your favourite programmes, aim the ONE FOR ALL 6 at your TV and press TV, MAGIC and then the MUTE key. You will automatically move through your favourite programmes, stopping at each for about three seconds. Remember the ONE FOR ALL 6 must be aimed at your TV the entire time you are using Scan. When you find a programme you would like to watch, simply press any key on the ONE FOR ALL key pad to stop the scan feature. To continue the favourite programme scan, press MAGIC, then the MUTE key again. The ONE FOR ALL 6 will stop automatically at the last favourite programme.

Notes: - To set up your favourite programmes for another device, follow steps 1 through 8, only substitute the appropriate device key (VCR, SAT, CD, AUD, DVD) during step 1. - Favourite Programme Scan can only be set up for one device at a time. Once you have set up your favourite programmes for one device, you will not be able to use the Scan feature with any other device.
To clear the favourite programmes you have set up: Press the device key. Press and hold down the MAGIC key until the device key blinks twice (the device key will blink once then twice). Press 6. Press the MAGIC key until the device key blinks twice (the device key will blink once then twice). The ONE FOR ALL 6 will now perform the Auto Scan function whenever the MAGIC and MUTE keys are pressed.

Device Sleeptimer

If your TV or Satellite has a Sleeptimer function built in, you can access this function with your ONE FOR ALL remote. To do so: 3 Make sure your TV (or Satellite) is switched on. Press the device key (TV or SAT). Point the ONE FOR ALL at your TV (or Satellite) and press and release MAGIC then press POWER. You should see the Sleeptimer activate on your TV screen. To increase the timer, simply press POWER again (within 5 seconds) until the timer gets to the desired time. To deactivate the Sleeptimer, repeat steps 1-3 above. During step 3, continue pressing POWER (within 5 seconds) until the timer indicates zero minutes.
Important note: Depending on how you used sleeptimer on the original remote, you might need to access sleeptimer in a different way (through menu for example).

ONE FOR ALL Sleeptimer

If your device does not have a sleeptimer function built in, you can install the ONE FOR ALL sleeptimer function. To do so: 3 Press the device key (TV, SAT, CD or AUD). Then, press and hold MAGIC until the device key blinks twice. Press 970. The device key will blink twice again. It is only necessary to perform steps 1, 2 and 3 once. Now to set the timer, continue with the steps below.
Setting the ONE FOR ALL Sleeptimer: It is possible to set the timer for 15, 30, 45 or 60 minutes. To do this, first make sure your device is switched on. Press the device key (TV, SAT, CD or AUD).

(:15) (:30) (:45) (:60)

Now, press and release MAGIC, then press POWER. The device key will blink once which indicates the timer is set for 15 minutes. To increase the timer, simply press POWER again (this must be done within 5 seconds). The device key will blink twice indicating the timer is set for 30 minutes (2x 15). You can press POWER to a maximum of four times which will set the timer to 60 minutes.
Once you have set the timer to the desired time, set your ONE FOR ALL remote down, pointing it at your device. When the programmed amount of time has elapsed, the ONE FOR ALL will send the command for POWER, hence turning off your device.

Important notes: - The device key on the ONE FOR ALL will blink every 15 seconds indicating that the remote is in Sleeptimer mode. - To deactivate the Sleeptimer, simply press any key on the ONE FOR ALL remote. - Also, it is only necessary to follow steps 1,2 and 3 above once. For subsequent use of the Sleeptimer, simply begin with Setting the Sleeptimer. - To switch the ONE FOR ALL back to Device Sleeptimer, repeat steps 1,2 and 3 above. The device key will blink 4 times. - Remember, when using the ONE FOR ALL Sleeptimer, you must set the remote so it is pointing to your device. - The ONE FOR ALL Sleeptimer can be set up for only one device at a time.

Macros

You can program your ONE FOR ALL 6 to issue a sequence of commands at the press of one button. For example, you may want to turn off your TV, VCR and Satellite at the same time. Any sequence of commands you regularly use can be reduced to one key stroke for your convenience. A Macro should only be set on the Custom keys. Example: To set up the Macro mentioned above on the key labeled A on your ONE FOR ALL 6: 1 Press and hold MAGIC until a device key blinks twice (the device key will blink once then twice). Press 5. Then press the A key to which the Macro will be assigned. Next press TV, POWER, VCR, POWER, SAT, POWER. To store the Macro, press and hold MAGIC until the device key blinks twice (the device key will blink once then twice). Whenever you press the A key, the ONE FOR ALL 6 will turn off your TV, VCR and Satellite.
To erase the Macro from the A key, press: MAGIC* 995 A key MAGIC*
*Here you must hold down MAGIC until the device key blinks twice.
Note: Each MACRO can consist of a maximum of 15 key strokes.

Shifted Macros

You can install a Shifted Macro on any key, except for the device keys (TV, VCR, SAT, CD, AUD and DVD), the MAGIC key, the Home theater key and the NUMBER keys. If for example, you want to program a shifted Macro on the POWER key, simply press MAGIC once then the POWER key during step 3. Now everytime you press MAGIC, then the POWER key, the ONE FOR ALL will turn off your TV, VCR or Satellite. To erase the Shifted Macro from the POWER key press: MAGIC* 995 MAGIC POWER key MAGIC*
* Here you must hold down MAGIC until the device key blinks twice.
Notes: - Make sure that you program a Macro on a spare key that you dont use in any mode. - Once you program a Macro on a specific key, the sequence will work regardless of the mode (TV, VCR, SAT, CD, AUD or DVD) you are using. - To avoid accidental recordings with the ONE FOR ALL 6, you must press the Record key twice to begin recording. Because of this, you cannot assign a Macro or Shifted Macro to the Record key. - If you had to hold down a key for a few seconds on the original remote control to get a function, this function may not work in a macro on your ONE FOR ALL remote. - If a Shifted Macro is placed on the Mute, Channel and Volume keys then Scan and Colour/Brightness will be sacrificed.

To delete a learned function: 1 Press and hold MAGIC until the device key blinks twice (the device key will blink once then twice). Press 6 (the device key will blink twice). Press the device key in which the function will be deleted. Press twice on the learned key which will be deleted (the device key will blink twice).* If there is another key which you wish to delete, repeat steps 1-4. The original functions of the ONE FOR ALL 6 will now be present.
* To delete a Shifted Learned feature, press MAGIC before you press the learned key to be deleted (during step 4).
To delete all learned functions across all modes: Press and hold MAGIC until the device key blinks twice (will blink once then twice). Press 0 (the device key will blink four times).
Notes: - During steps 2-7 (page 13), you have approximately 10 seconds to conduct each step. If there is a gap of more than 10 seconds between two steps, you will have to start again from step number 2. - If you learn a function on another key besides the "custom keys", the original ONE FOR ALL feature automatically becomes shifted. You can press MAGIC then the key to access it (this excludes the POWER, Mute, Channel and Volume keys). - The Learning feature is mode specific. Therefore you can place one learned feature per mode on the same key. - If a Shifted Learned function is placed on the Mute, Channel and Volume keys then Scan and Colour/Brightness will be sacrificed. - The ONE FOR ALL 6 can learn approximately 25 functions. - You can replace a learned function by placing another learned function on top. - Learning should not be done in direct sunlight or under incandescent lights. - Make sure you are using new batteries before following the instructions above. - Upon changing the batteries, your learned functions will be retained.

Home Theater

The HOME THEATER mode key allows you to bring the most commonly used functions of your home theater components together on one mode key. By doing this you can configure the keypad to meet your specific home theater needs. You can define by key grouping, which component should be controlled. The steps below will guide you through programming the Home Theater key. You will be able to divide your ONE FOR ALL 6 keypad into five Groups, each Group controlling a different device.

Note: The HOME THEATER key can only be set up after you have all your devices working with the ONE FOR ALL 6.
The 5 possible Groups to select are: Key Group Group 1 Group 2 Group 3 Group 4 Group 5 The Key Group that will be selected, consists of: Play, Stop, FF, REW, Record, SP/LP, Auto Volume (+), Volume (-), Mute Channel (+), Channel (-), Power 1 - 9, 10, 0, AV Available Device keys for each Group are: VCR, DVD, CD, AUD AUD, TV, VCR, SAT, CD TV, VCR, SAT, DVD TV, VCR, SAT SAT, TV, VCR, AUD, DVD
Menu, Up, Down, Left, Right,

OK, Exit

The BOLD keys ( Play, Volume (+), Channel (+), 1, Menu ) are the keys to press to select a Group. For example: If you press the Play key, you will select Group 1. If for example, you choose to select Group 4 by pressing the number 1 key, you will not be able to combine this with for example, the AUD key because the AUD key is not available in Group 4. The ONE FOR ALL 6 will ignore it. The AUD key will not blink twice when you press it. If for example, you press the VCR key afterwards, the VCR key will blink twice because it is available in Group 4. If a Group is selected multiple times, the latest entry overwrites previous entries.
Setting up the Home Theater key
Example: To set up the key pad like this Key Group Group Group Group Group Group Press HOME THEATER. To be controlled by DVD AUD TV TV VCR
Press and hold MAGIC until a device key blinks twice (the device key will blink once then twice).

Press 9.

Press the Play key (Group 1 will be selected). Press the DVD key (the DVD key blinks twice).
Press the Volume (+) key (Group 2 will be selected). Press the AUD key (the AUD key blinks twice).
Press the Channel (+) key (Group 3 will be selected). Press the TV key (the TV key blinks twice).
Press the number 1 key (Group 4 will be selected). Press the TV key (the TV key blinks twice).
Press the Menu key (Group 5 will be selected). Press the VCR key (the VCR key blinks four times). You will automatically exit the HOME THEATER programming mode.
Now, whenever you press the HOME THEATER key: The Play keys (Group 1) will control your DVD player. The Volume keys (Group 2) will control your amplifier. The Channel keys (Group 3) will control your TV. The Number keys (Group 4) will control your TV also. The Menu keys (Group 5) will control your Videorecorder. If you do not complete a group entry within 10 seconds, the programming will not be stored. You can exit the HOME THEATER programming mode after completing a Group assignment by pressing MAGIC (the device key blinks twice). Your ONE FOR ALL 6 will store the changes entered up to that point.

Telephone Upgradable Technology
Your ONE FOR ALL 6 contains a unique feature which allows new codes to be added simply by holding it to your telephone. In a matter of seconds, our magnetic coupling technology quickly and reliably transfers information to the ONE FOR ALL 6 without complex plugs, adapters or attachments. This means, as you buy new products in the future, the ONE FOR ALL 6 will never become obsolete. Simply ring our consumer help-line and one of our customer service representatives will assist you through the entire process of upgrading your ONE FOR ALL 6. To ensure the process goes smoothly, here are a few steps to follow: 1 Write down the brand name(s) and model number(s) of your device(s) in the space provided on the Consumer Service page before you call. Ring our consumer help-line and explain which device(s) you would like added to your ONE FOR ALL 6. After our customer service agent records the brand name(s) and model number(s) of your device(s), he/she will lead you through the set up procedure and then will ask you to hold the ONE FOR ALL 6 to the speaker portion of your telephone (see diagram below). In doing this, the information needed for your device is transferred through the telephone into your ONE FOR ALL 6 in a matter of seconds. Please note, cordless telephones, speaker telephones and mobile telephones are not recommended. After your ONE FOR ALL 6 has been upgraded by telephone, stay on the line. Our customer service agent will ensure that your ONE FOR ALL 6 is working properly with your device(s) and answer any other questions you may have.
Upgrade your ONE FOR ALL remote via your PC
Instructions for start up: Visit our website www.oneforall.com Select your region Select Product support Select Universal Remote Controls Select the ONE FOR ALL remote you want to upgrade: ONE FOR ALL 6 (URC-7562) Select Internet Download
Now you have entered our special Online Download section. From this point just follow the instructions on the screen for easy upgrade of your remote.
Trouble-Shooting Helpful Hints
Problem: Your brand is not listed in the code section? The ONE FOR ALL does not operate your device(s)? Solution: Try the search method on page 7.
A) Try all the codes listed for your brand. B) Try the search method on page 7. You may be using the wrong code. Try repeating the Direct Set-Up using another code listed under your brand or start the search method over again to locate the proper code. Enter the programme number exactly as you would on your original remote. As a safety feature on your ONE FOR ALL, you must press the Record key twice. Make sure you are using new batteries and are aiming the ONE FOR ALL at your device. Replace batteries with 2 fresh, new AA/LR6 alkaline batteries.

Novis NTC Oceanic Octagon

2830746 2830747

Satmaster Schcke Schneider Schwaiger

0885 0692

2830929 Universum
2830751 SedeaElectronique Seemann 2830753 SEG Seleco Servi Sat Siemens 2830780 Silva Skantin Skardin Skinsat SKR Sky Skymaster Skymax 2831206 SkySat Skyvision SL 2831207 Smart Sony SR Starland Starring Strong STVI Sumida Sunny Sound Sunsat 2830831 Sunstar Tagra Tantec 2830853 Tatung Techniland TechniSat 2830860 Technowelt Teco Telasat 2830868 Teleciel 2830869 Telecom Teledirekt Telefunken 2830875 Teleka Telemaster Telesat 2830883 Telestar Teletech Televes 2830888 Telewire 2830891 Tensai 2830895 Thomson 2830896 Thorens Thorn Tioko 2830900 Tokai Tonna Toshiba TPS Trendline Trendplain Triad 2830912 Triasat 2831061 Triax 2830915 Tristar Uniden 2830923 Unisat Unitor 0217 0332
Variosat Vector Ventana Vestel Videocrypt Viper Visiosat Viva Vortec 2830931 VTech 2830962 Wela 2831091 Wetekom Wewa 2831217 Wibo Winersat Wintergarten Wisi 2830971 Woorisat World Worldsat XCOM Xrypton XSat 2832070 Zaunkonig Zehnder ZetaTechnology Zodiac Zwergnase 0794 0243
Cable Converters Kabelsignalumwandler Dcodeurs de cble Decodificadores Conversores de Cabo Convertitori di reti Kabel Decoders Cabel Converter Kabeldekodere Kabeldekodrar Kotiptteet
2830636 Alcatel Austar BT Cabletime Canal Plus Comcrypt Filmnet FranceTelecom GeneralInstruments Jerrold Kabelvision Macab MNet Mr Zapp NTL Cabletell Optus Philips 0817
2831065 PVP Stereo Visual 2830718 Sagem 2830748 ScientificAtlanta 2830864 Tele+Telepiu 2830917 Tudi 2830925 United Cable 2832040 Videotron 2830945 Videoway 2830951 Visiopass 2832055 Westminster

0105 0716

CD / Mini Disc
Aiwa 0124 Akai 0362 Alba 0615 Alto 0625 Arcam 0157 Ariston 0625 Audio Research 0157 Audiolab 0157 Audiomeca 0157 Audioton 0157 Bang & Olufsen 0212 BAT 0157 Bush 0615 Cairn 0157 California Audio Lab 0029 Cambridge Audio Carver 0179 Craig 0615 Cyrus 0157 Denon DKK 0000 Dynamic Bass 0179 Eclipse 0625 Fidelity 0625 Fisher 0179 Gemini 0625 Genexxa Goldmund 0157 Goodmans 0615 Grundig 0157 GTX 0362 Harman/KardonHCM 0625 Hiro 0625 JVC 0072 Kenwood Krell 0157 Lansay 0625 Linn 0157 Marantz 0157 Matsui 0157 MCS 0029 Melectronic 0362 Memorex 0032 Meridian 0157 Micromega 0157 Mission 0157 MTC 0625 NAD 0000 Naim 0157 NSM 0157 Panasonic 0367 Philips 0626 Pink Triangle 0625 Pioneer Proton 0157 QED 0157 Quad 0157 Radiotone RCA 0179 Realistic 0179 Revox 0157

2840987

Rotel SAE Sansui Sanyo Schneider Sharp Siemens Sony SuperTech Synergy Tandy Teac Technics Thorens Thule Universum Victor Watson Wharfedale Yamaha Zenith

0187 0615

Miscellaneous Audio Diverse Audio Divers Audio Audio Diverso udio Misto Audio Misto Overige Audio Miscellaneous Audio Diverse Lydutrastning Diverse Ljudutrustning Muut audiolaitteet

Information Canal Sat et TPS
Pour retrouver lemplacement des fonctions dappareil TPS ou Canal Satellite sur les touches de la tlcommande universelle ONE FOR ALL, veuillez vous rfrer aux tableaux ci-dessous. Ne pas oublier de programmer le code de votre appareil (TPS ou Canal Satellite) avant lutilisation des informations suivantes. Canal Satellite (code satellite 0853) Fonctions de la tlcommande Canal Satellite Volume + Volume Mute Chane + Chane Power Guide Programme Services Haut Bas gauche droite Ok Exit TV/SAT Rewind Pilote Personal Menu Chanes Favorites Emplacement des fonctions sur les touches de la tlcommande ONE FOR ALL VOLUME+ VOLUMEMUTE CHANE + CHANE POWER MENU ou PAUSE PLAY FF HAUT BAS GAUCHE DROITE OK (touche MUTE en mode Menu) AV (en mode Menu) AV RETOUR RAPIDE (REWIND) SP/LP AUTO 10
TPS (code satellite 0820) Fonctions de la tlcommande TPS Volume + Volume Mute Chane + Chane Power Guide MENU Info Haut Bas gauche droite Ok Exit TV/SAT Rouge Bleu Jaune Vert RETURN Emplacement des fonctions sur les touches de la tlcommande ONE FOR ALL VOLUME+ VOLUMEMUTE CHANE + CHANE POWER MENU PLAY PAUSE HAUT BAS GAUCHE DROITE OK (touche MUTE en mode Menu) AV (en mode Menu) AV SP/LP AUTO RECORD STOP 10
Universal Electronics BV Europe & International P.O. Box DH, Enschede The Netherlands

URC-DD-0202

Printed on Recycled Paper