DoveBid Worldwide Amsterdam Atlanta Bangkok Barcelona Boston Brussels Chicago Dallas Denver Detroit Dublin Dusseldorf Hartford Hong Kong Houston London Los Angeles Melbourne Milwaukee Sacramento San Francisco San Jose Seattle Singapore Sydney Tokyo Toronto Tucson

DoveBid Webcast Auction

By order of the U.S. Bankruptcy Court, Eastern District of Michigan, Southern Division, Case No. 01-64771, Chapter 11, Bankrupt assets of
ONKYO AMERICA, INC. 3030 Barker Drive Columbus, Indiana Complete State of the Art OEM Car Speaker Manufacturing Facility
Auction Tuesday, February 26, 2002 Beginning at 10am Preview Monday, February 25, 2002 9am to 4pm and morning of sale

www.dovebid.com

www.industrialauctioneers.org
Tues., February 26, 2002 Beginning at 10am
Speaker Manufacturing Lines

Preview

Mon., February 25, 2002
9am to 4pm and morning of sale

Location & Preview

ONKYO AMERICA, INC. 3030 Barker Drive Columbus, Indiana
FUJI CONE SPEAKER MANUFACTURING LINE

Directions

From Indianapolis International Airport Exit airport by following I-465/I-70 signs. Proceed to I-465 South. Proceed on I-465 South approximately 8-1/2 miles to I-65 South/Louisville Exit (Exit 53B). Proceed on I-65 South approximately 42 miles to Route 58 West (Exit 64). After exiting expressway, turn left onto Route 58 (which becomes CR-450 S) and proceed approx. 2/10 mile to Old Lake Drive (first traffic light) (Woodside Business Center). Turn left and proceed 1/10 mile to Inwood Drive. Turn left onto Inwood Drive (which becomes Interlake Drive) and proceed approximately 1/2 mile to Barker Drive. Turn right and proceed to the sale site on the left side. Watch for auction and parking signs. For further information, please contact Steve Wolf in our Grand Rapids, Michigan Office at Phone (616) 458-7820 or (248) 219-6113 (Cell) or Ray Welker at (248) 763-3278
As a courtesy to our buyers, DoveBid can provide contact information for s hipping companies scheduled to attend this auction. For details, please visit the DoveBid Website at www.dovebid.com or call our customer care department at 800-665-1042. A Buyers Premium Will Apply at this Sale
SPEAKER MANUFACTURING LINES
1 FUJI CONE SPEAKER MANUFACTURING LINE, (1998) A# OM-5, Pallet Style, I-Line Configuration, 4.9 Seconds/Cycle Time, 12.2 Speakers/Minute Capacity, 13cm To 12 Diameter Driver Capacity, Round & Oval Style Speaker Shape Capacity, Overall Length 210, For a complete list of all components in this line, please visit www.dovebid.com 3 IWANTANI SPEAKER MANUFACTURING LINES, (1) (1992) A# OM-3, (1) (1990) A# OM-2, (1) (1988) A# OM-1, Pallet Style, I-Line Configuration, 4.5 Seconds/Cycle Time, 13.3 Speakers/Minute Capacity, 10cm To 8 Diameter Driver Capacity, Round & Oval Style Speaker Shape Capacity, Overall Length 210, For a complete list of all components in these lines, please visit www.dovebid.com
1 OF 3 IWANTANI SPEAKER MANUFACTURING LINES

HOPPER/DRYERS

1 UNA-DYN PROTEC MODEL 929020 200-LB. CAPACITY MODULAR HOPPER/DRYER, S/N 159989-1 (1997), Echo Systems Station Control, Una-Dyn Protec Model UDC-100 Auto Mini-Dryer, S/N 159989-08-0697 (1997), Cart-Mounted 1 UNA-DYN PROTEC MODEL 929020 150-LB. CAPACITY MODULAR HOPPER/DRYER, S/N 159989-4 (1997), Echo Systems Programmable Station Control, Una-Dyn Model UDC-55 Auto Mini-Dryer, S/N 159989.01-03-0697 (1997), Cart-Mounted 2 UNA-DYN PROTEC MODEL 920916 100-LB. CAPACITY MODULAR HOPPER/DRYERS, S/Ns 159989-2, 159989-3 (BOTH 1997) 2 UNA-DYN PROTEC MODEL UDC-55 AUTO MINI-DRYERS, S/Ns 159989.01-02-0697, 159989.01-01-0697 (BOTH 1997), Cart Mounted
PLASTIC INJECTION MOLDERS
1 MITSUBISHI MODEL 500MJ-80 500-TON X 80-OZ HYDRAULIC CLAMP RECIPROCATING SCREW PLASTIC INJECTION MOLDING MACHINE, S/N 3G408130 (1997), Platen Size 45.3 X 45.3, Tie Bar Spacing 31.9 X 31.9, Maximum Daylight 55.1, Minimum Mold Height 13.8, Clamping Stroke 41.3, Hydraulic Core Pull & Ejection, Automatic Lubrication, Una-Dyn Hopper Loader & Drawer Magnet & Echo Systems Digital Programmable Station Control, Mitsubishi Model MAC-VI Programmable Control With Remote Tech Box 1 MITSUBISHI MODEL 320MJII-30C 320-TON X 30-OZ HYDRAULIC CLAMP RECIPROCATING SCREW PLASTIC INJECTION MOLDING MACHINE, S/N 3S29E108 (1997), Platen Size 37.4 X 37.4, Tie Bar Spacing 25.98 X 25.98, Maximum Daylight 41.7, Minimum Mold Height 11.8, Clamping Stroke 29.92, Hydraulic Core Pull & Ejection, Automatic Lubrication, Una-Dyn Hopper Loader & Drawer Magnet, Mitsubishi Model MAC-VI Programmable Control 2 MITSUBISHI MODEL 210MJ11 210-TON X 17-OZ HYDRAULIC CLAMP RECIPROCATING SCREW PLASTIC INJECTION MOLDING MACHINES, S/Ns 3519D111, 3S19D112 (BOTH 1997), Platen Size 32.28 X 32.28, Tie Bar Spacing 22.44 X 22.44, Maximum Daylight 35.43, Minimum Mold Height 10.6, Clamping Stroke 24.80, Hydraulic Core Pull & Ejection, Automatic Lubrication, Una-Dyn Hopper Loader & Drawer Magnet & Echo Systems Digital Programmable Station Control, Mitsubishi Model MAC-VI Programmable Control With Remote Tech Box

HOPPER LOADER

1 UNA-DYN VACUUM HOPPER LOADER, S/N 159989-14-0697 (1997), Maxi-Vac 3-HP Power Pack, Echo Systems Programmable Master Control
VIEW OF UNA-DYN PROTEC 100-LB. TO 200-LB. CAPACITY MODULAR HOPPER/DRYERS
See us on the web www.dovebid.com
To view a complete asset list, visit our website @ www.dovebid.com
Plastic Injection Molding Equipment
MITSUBISHI MODEL 500MJ-80 500-TON X 80-OZ HYDRAULIC CLAMP RECIPROCATING SCREW PLASTIC INJECTION MOLDING MACHINE
MITSUBISHI 320MJII-30C 320-TON X 30-OZ HYDRAULIC CLAMP RECIPROCATING SCREW PLASTIC INJECTION MOLDING MACHINE
CNC PARTS HANDLING ROBOTS
3 WHITTMAN 3-AXIS CNC PARTS HANDLING ROBOTS, (2) MODEL W-631, Maximum Lifting Weight 31-Lbs., 11.8-kVA Power Supply, (Both 2000), S/N 5122, Travels: X 19.68, Y 55.11, Z 118.11, S/N 5128, Travels: X 19.68, Y 55.11, Z 98.42, (1) MODEL W-430, S/N 5103/014 (1997), Travels: X 19.68, Y 47.24, Z 78.74, Maximum Lifting Weight 22-Lbs., 3.6-kVA Power Supply

TEMPERATURE CONTROLLERS

4 VAN DORN/DEMAG MODEL 1WT-9-1-.5-DS-460 TEMPERATURE CONTROLLERS, S/Ns 9700-302A, 9700-302B, 9700-302C, 9700-302D (ALL 1997), Digital Temperature Control 2 INCOE MICROCOM 760 8-STATION TEMPERATURE CONTROLLERS, S/Ns N/A, 15-KVA Transformer

CHILLERS

1 BUDZAR MODEL AC-15-FCB-92-00-002 CHILLER, S/N 8524-9703 (1997), (2) 8-HP Compressor Motors, 3-HP Pump Motor, 7-1/2-HP Blower Motor, Maximum Working Pressure 380 PSIG, Partlow Digital Temperature Control 1 BUDZAR MODEL AC-10-FCB-48-00-004 CHILLER, S/N 970A-1041 (1997), Maximum Working Pressure 395 PSIG, Partlow Digital Temperature Control, 10-HP Compressor Motor, 3-HP Pump Motor
1 OF 2 MITSUBISHI MODEL 210MJ11 210-TON X 17-OZ HYDRAULIC CLAMP RECIPROCATING SCREW PLASTIC INJECTION MOLDING MACHINES AND 1 OF 3 WHITTMAN 3-AXIS CNC PARTS HANDLING ROBOTS
Can't make it to Columbus, Indiana? With DoveBid's Webcast technology anyone around the world can bid on this auction through the Internet. Go to DoveBid.com: Register up to the day of the sale and download the free software. Bid in Real Time! All you need is a computer, Internet access and a touch-tone telephone to participate in this live auction. With Webcast technology, you are virtually there on the auction floor. The action is live and you are bidding with people in the room and around the world. The image of the current asset being sold will be displayed on your screen. You'll hear the auctioneer on your telephone. You press 1 on your telephone keypad to raise your paddle and press the # key to end your bid. It's easy. It's fun. It's the future. And it's here now at DoveBid! Terms & Conditions

Buyers are responsible for all shipping and rigging charges. All items are sold AS IS, WHERE IS AND WITH ALL FAULTS. DoveBid shall charge and collect from each successful bidder a 13% buyers premium for each sale at the auction, in addition to the purchase price as bid. Purchasers who pay in the form of certified funds or wire transfer shall receive a discount from the buyers premium equal to 3% of the purchase price (unless such purchasers bid over the Internet, in which case the discount shall be equal to 1% of the purchase price). Each successful bidder must pay a 25% deposit toward the purchase price immediately following the successful bid. Applicable taxes will be added to the purchase price of all taxable items. Acceptable means of payment include certified funds, wire transfers, Visa, American Express and Mastercard. The complete terms and conditions that govern this auction will be distributed at the auction site and/or are available on our website at www.DoveBid.com. The complete terms and conditions may include terms that are unique to this particular auction. Please read them carefully before you bid in the auction. If you participate in the auction, you will be deemed to have read and consented to all of the terms and conditions.

GRANULATORS

4 RAPID PLASTICS GRANULATORS, (1) MODEL X 14, S/N 380.28W (1998), 5-kW Motor, (1) MODEL 614-SR 6 X 14, S/N 310.712 (1998), 2.2-kW Motor, (1) MODEL 611-RS 6 X 11, S/N 240.1696 (1998), 2.4-kW Motor, (1) MODEL 69-SR 8 X 8, S/N 250.2526 (1998), 2.2-kW

PARTICLE REMOVAL SYSTEM

1 ANALYTIC SYSTEMS LAB MODEL FPRS-40-ABH FINITE PARTICLE REMOVAL SYSTEM, S/N 5198 (1998), 7-Amp
RAPID PLASTICS GRANULATORS
(2) INCOE MICROCOM 760 8-STATION TEMPERATURE CONTROLLERS; BUDZAR MODEL AC-15-FCB-92-00-002 AND MODEL AC-10-FCB-48-00-004 CHILLERS; ANALYTIC SYSTEMS LAB MODEL FPRS-40-ABH FINITE PARTICLE REMOVAL SYSTEM
To schedule an auction or appraisal call 800.665.1042
Speaker Manufacturing Equipment

RIVETER

1 CHICAGO RIVET 912 PEDESTAL-TYPE RIVET MACHINE, S/N 11796-SS, With Touch-O-Matic Safety Device, 1/3-HP Motor

MAGNETIZERS

1 ACOUSTIC DESIGN TOP & BOTTOM MAGNETIZER, S/N N/A, With 10W X 10L Motorized Belt Conveyor 1 NIHON DENJI SOKKI MODEL SCB-1510 MAGNETIZER & POWER SOURCE, S/N 6783, Wire Size 3 X 10, 73-Turn Capacity 2 MAGNAX MAG-1510-1A MAGNETIZERS, S/Ns 99066, 99065 (BOTH 1999), Digital Readout 1 TECHNOPHYSIK TECHNO TOWER 2000-30-D MAGNETIZER, S/N G971001 (1997) 1 MAGNETIC INSTRUMENTATION MODEL 33792 MAGNETIZER, S/N 7500/900-8

PARTIAL VIEW OF SPEAKER MANUFACTURING EQUIPMENT
1 OF 2 NOVA TOOL & ENGINEERING 8-STATION AUTOMATIC CONE SOLDERING MACHINES 1 OF 3 SCHMIDT 20-TON PNEUMATIC STAKING PRESSES

COIL WINDING MACHINE

1 NIPPON SERBIG SERIES PNS-250S COIL WINDING MACHINE, S/N 902520 (1990), Programmable Controls
FOAM APPLICATION MACHINES
2 HI-STAR 3-AXIS FOAM APPLICATION MACHINES, Both With 3-Axis Robot, Dual Slide-In Speaker Foam Fixture Table, Computer Control, (1) S/N N/A (2000), With Nordson Model FM153 Hot Melt Foam Application Machine, S/N AA95L61859 (1995), (1) S/N N/A (1998), With Nordson Model FM153HO Hot Melt Foam Application Machine, S/N AA97L62945 (1997)

ULTRASONIC WELDER

1 BRANSON 900 IW PLUS SERIES INTEGRATED ULTRASONIC WELDER, S/N YH700556 (1997), Programmable Controls

CONE SOLDERING MACHINES

2 NOVA TOOL & ENGINEERING 8-STATION AUTOMATIC CONE SOLDERING MACHINES, S/N 5629-3 A# 00456, S/N 4419, S/N 5629-3 With Modicon Model Panel Mate Plus Programmable Logic Control

HOT MELT MACHINES

1 NORDSON MODEL FM153 HOT MELT FOAM APPLICATION MACHINE, S/N AA97K61630 (1997) 8 HOT MELT TECH PRO-FLEX HOT MELT GLUE APPLICATORS, (5) BENCHMARK-205, S/Ns 14388, 19780, 21735, 15840-1, 15840-2, (3) MODEL PF405-35-3-21L, S/Ns 14001, 13852, 15480

STAKING PRESSES

3 SCHMIDT 20-TON PNEUMATIC STAKING PRESSES, S/Ns N/A A#s 00394, N/A, N/A (ALL 1996), Bed Size 12 X 14-1/2, Throat 8, Schmidt Model 50 Digital Press Control, STI Minisafe Safety Light Curtain 1 CUSTOM-BUILT MODEL ALP-10 10-TON PNEUMATIC STAKING PRESS, S/N 0598 A# 00119, Digital Readout 1 CUSTOM-BUILT 2-STATION HEATED-PLATEN PNEUMATIC STAKING PRESS, Omron Digital Temperature & Time Controls

SPEAKER ADHESION CELL

1 SPEAKER ADHESION CELL, Consisting of: Motoman Model YR-SV3-0000 6-Axis Robot, S/N RA9301-7082-6; Yasnac Model MRC11S-SB3 Power Supply; Yasnac Model MRC Computer Control, With Remote; Custom-Built Adhesion Fixture Table; STI Minisafe Safety Light Curtain
MISCELLANEOUS SPEAKER MANUFACTURING EQUIPMENT
OVAL C 3-AXIS ADHESION MACHINE STATIONS, With Obostar MCA Series Power Supplies BACK GASKET ADHESIVE & PRESS STATION APPLICATION STATIONS, (1) MAGNET STRETCH & DUAL ADHESIVE, (3) GASKET, (2) DUST CAP, (1) 2-PART ADHESIVE CONE PAPER, DAMPER & VOICE COIL ASSEMBLY STATIONS CLEANING VOICE COIL PRE-ASSEMBLY FIXTURES FY CAULKING STATION ESTAR MODEL C-6 CUTTING STATIONS MANUAL ACRYLIC DISPENSING STATION 4-TRAY AIR DRYING STATIONS PACE FUME EXTRACTOR PRECISION VALVE & AUTOMATION 2-AXIS GLUE APPLICATION ROBOT V & F MACHINE COPPER CAP GLUE MACHINE STATIONS CU-CAP GLUE STATIONS PAINTING STATIONS, (2) OVAL C, With Obostar MCA Series Power Supplies, (3) 3-POINT, (2) PO MG PAINTING MACHINE STATIONS, (2) D.A., (1) With Vacuum Cleaner & Cone Adhesion Machine 1 V & F MACHINE PNEUMATIC PRESS STATION 1 FCC MODEL ALP-10 CAULKING PRESS 1 DUAL STATION GASKET PRESS 3 CUSTOM-BUILT SOLDER STATIONS 3 SPEAKER STAMP STATIONS 2 APPLY WHIZZER STATIONS Fixtures, Handling Equipment, Solder & Assembly Tables, Etc.

PNEUMATIC PRESSES

5 MARUNI MODEL MP-200 200-KG PNEUMATIC PRESSES, S/Ns P199F01S (1999), 2-0546, 2-0046 (1998), 2-0460, N/A (1999), Bed Size 5-1/2 X 10, Stroke 75mm, Adjustment 25mm, Omron Digital Readout 1 CUSTOM-BUILT 2-STATION HEATED-PLATEN PNEUMATIC PRESS, S/N N/A, Platen Size 8 X 10, Digital Temperature Controls, STI Safety Light Curtain 1 ELECTROPUNCH MODEL P1000 BENCH-TOP PNEUMATIC PRESS, S/N 6071

HYDRAULIC PRESSES

1 AIR-HYDRAULICS MODEL AH20S-CF 20-TON DUAL-HEAD AIR-OVER-HYDRAULIC PRESS, S/N 5976A A# 00578, Ferguson Rotating Table Diameter 44, Throat 8, Ram Diameter 2-1/2, Posi-Guard Safety Light Curtain, Hydraulic Unit 1 ENERPAC 5-TON 4-POST BENCH-TOP HYDRAULIC PRESS, S/N N/A A# 00996

EYELET MACHINES

6 A.J. HORNE MODEL AF-500 EYELET MACHINES, S/Ns 389, 188, 299, 199, 392, 293, With Detect-A-Finger Safety Device 2 YAMAKOU MODEL YE3B EYELET MACHINES, S/Ns 2160596, 133, With Detect-A-Finger Safety Device 1 NITTO MODEL 601 EYELET MACHINE, S/N E1605 (1990)

TO 2000

1 OF 2 HI-STAR 3-AXIS FOAM APPLICATION MACHINES PAGE 4 SPEAKER ADHESION CELL THERMOTRON MODEL S-16C SINGLE-DOOR ENVIRONMENTAL TEST CHAMBERS
ENVIRONMENTAL TEST CHAMBERS
3 THERMOTRON S-16C SINGLE-DOOR ENVIRONMENTAL TEST CHAMBERS, S/N 24309 A# 00655, S/N 24308 A# N/A, S/N 24307 A# 06656 (ALL 1995), Chamber Size 30 X 30 X 30, Temperature Range 5C to 85C, Humidity Range 20% to 90%, Thermotron Model 2800 Programmable Controller, Thermotron Digital System Monitor, 2-HP Motor 2 TABAI ESPEC SINGLE-DOOR STAINLESS STEEL ENVIRONMENTAL TEST CHAMBERS, (1) MODEL PL-4FPH, S/N 12006132 (1993), (1) MODEL PL-4G, S/N 3139818 (1988) A# 00654, Both With Chamber Size 100cm W X 100cm H X 80cm D, Temperature Range 40C to 150C, Humidity Range 20% to 98%, 1.5 X 2-kW Heater, Tabai Model EY-101 Programmable Control & Chart Recorder 1 HARSHAW MODEL 21 SALT SPRAY ENVIRONMENTAL TEST CHAMBER, S/N 21E-005 A# 00653, Chamber Size 30W X 30L X 38D, Maximum PSI 25, Digital Temperature Controls, Chart Recorder
ELECTRONIC & TEST EQUIPMENT
1 AUDIO PRECISION DCX-127 MULTI-FUNCTION METER/POWER SUPPLY 12 TECRON 5530 AMPLIFIERS 1 SENCORE PA81 STEREO POWER ANALYZER 3 SIGNAL ANALYZERS, (1) BRUEL & KJAER 2032 DUAL CHANNEL, (2) HEWLETT-PACKARD 35665A DYNAMIC 1 LEADER LDC-824S DIGITAL COUNTER 1 KIKUSUI FC01120 FREQUENCY COUNTER 1 KIKUSUI 255 MULTI-COUNTER 1 HEWLETT-PACKARD 34970A DATA ACQUISITION/SWITCH UNIT 1 YEW 2786 DECADE RESISTANCE BOX 1 ASHLY PQX-572 SEVEN BAND PARAMETRIC EQUALIZER 1 KNOHN HITE 3750 FILTER 2 FUNCTION GENERATORS, (1) HEWLETT-PACKARD 3312A, (1) TENMA 72-SWEEP GENERATORS, (1) BK PRECISION 3017A, (2) KIKUSUI MODEL 462S 1 N.F. DM-155B AUTOMATIC DISTORTION METER 4 MULTIMETERS, (1) ADVANTEST TR6848 DIGITAL, (1) FLUKE 45 DUAL DISPLAY, (1) HEWLETT-PACKARD 34401A, (1) HEWLETT-PACKARD 2478A 1 ONSOKU OMT-205 VOICE COIL TEMPERATURE METER 1 PANASONIC VP-9623P AC VOLTMETER 14 VOLT/DECIBEL METERS, (1) TRIO VT-104, (8) KENWOOD VT-121, (3) KENWOOD VT-171, (1) KENWOOD VT-181, (1) HEWLETT-PACKARD 400F 43 OSCILLATORS, (1) KIKUSUI ORC11 RC, (36) ONSOKU OG-242S SPEAKER TEST, (3) ONSOKU OG-242RA SPEAKER TEST, (2) ONSOKU OG-53J NOISE 4 OSCILLOSCOPES, (1) BK PRECISION 2615A, (1) HITACHI V-302F, (1) TEKTRONIX TDS 210 2-CHANNEL, (1) TENMA 72-FISHER PERMASCOPE 20 ONSOKU POLARITY CHECKERS 8 LISTEN MICROPHONE POWER SUPPLY SETS 3 TRIPP LITE PR-60 POWER SUPPLIES ZENITH STC201214 PORTABLE 7 MATSUAGA SVC-128.3 AUTOMATIC VOLTAGE REGULATORS ULTRASONIC CLEANER 1 NIKON SMZ-2B STEREOSCOPE, With Light Source 1 BRUEL & KJAER 4913 STROBOSCOPE 1 HEWLETT-PACKARD 3488A SWITCH CONTROL UNIT 1 ONKYO ATS-1 AUTOMATIC IMPEDANCE TESTER 1 KIKUSUI TOS7010L INSULATION TESTER 1 SPECTROMETRY 5842 TIME DELAY CONTROL UNIT 2 SHIMADZU DIGITAL LAB SCALES 1 YOKOGAWA 2755 WHEATSTONE BRIDGE 1 KUNSTKOPF KU100 DUMMY HEAD Meters, Testers, Probes, Etc.

SOUND CHAMBERS

1 ANECHOIC SOUND CHAMBER, Size 15W X 20L X 9H, Wood Frame, Wire Mesh Floor, Lights & Insulation 2 BOLTED METAL SOUND BOOTHS, (1) Size 7W X 7L X 8H, With Window, Door & Conveyor Entry & Exit Ways, (1) Size 9W X 9L X 8H, With Doors & Glass Windows
1 ASAHI KAGAKU DF-88 SINGLE-DOOR ELECTRIC OVEN, S/N 900936 A# 00813, Chamber Size 32 X 32 X 48H, Maximum Operating Temperature 300C, Digital Temperature Control 4 CUSTOM-BUILT TRAY-TYPE ELECTRIC OVENS, S/Ns N/A, Chamber Size 42W X 55H, Tray Width 27-1/2, Chain Drive, Operating Temperature 46C, (4) Circulating Fans, Digital Temperature Controls

ULTRASONIC CLEANER

1 ZENITH MODEL STC201214 PORTABLE ULTRASONIC CLEANER, S/N 79992883, Chamber Size 20 X 12 X 14D, Digital Timer, 1/3-HP Motor

TENSILE TESTER

1 WEIGHT-TRONIX MODEL DTM 500-LB. CAPACITY TENSILE TESTER, S/N D95011 (1995) A# 01378, Magitronic 486DX-33 Personal Computer Programmer

STEREO EQUIPMENT

10 CROWN AMPLIFIERS, (4) MICRO-TECH 1200, (5) CROWN K2, (1) MCINTOSH MCONKYO A-809 STEREO AMPLIFIER 13 STEREO POWER AMPLIFIERS, (4) MCINTOSH DIGITAL, (8) NAD 214, (1) ONKYO INTEGRA MONKYO GRAND INTEGRA P-308 STEREO PREAMPLIFIER 2 STEREO DUAL CASSETTE DECKS, (1) PIONEER CT-W604RS, (1) ONKYO TA-WONKYO STEREO CASSETTE DECKS, (1) INTEGRA TA-2090, (1) INTEGRA TA-ONKYO DX-V500 CD/CDV/LD COMPATIBLE PLAYER 3 ONKYO COMPACT DISC PLAYERS, (1) DX-C200, (1) DX-6800, (1) DX-ONKYO INTEGRA T9090II FM STEREO TUNER 2 ONKYO TUNER AMPLIFIERS, (1) TX-905, (1) TX-SV525 AUDIO/VIDEO CONTROL 3 VCRs, (1) SONY SLV-675HF, (1) ZENITH VR4156, (1) TOSHIBA M-OMNI DRIVE LOUDSPEAKER MANAGEMENT SYSTEM
1 MITUTOYO MODEL B504B 3-AXIS BRIDGE-TYPE CMM, S/N 0110006 A# 01376, Black Granite Surface Plate Size 34 X 34 X 10, Travels: X 20, Y 16, Z 12, Renishaw PH1 Probe, Mitutoyo MAG 1 Power Supply, IBM Personal Computer Programmer With Printer, Kaeser Compressed Air Dryer

MEASURING SYSTEMS

1 MICRO-VU VECTOR 12X12 BRIDGE-TYPE VIDEO MEASURING SYSTEM, S/N 3606 (1994) A# 01377, RSF-Elektronik Model X 12 Viewing Table, Travels: X 12, Y 12, Z 6, Micro-Vu Model FD-10 Focus Detector, Panasonic Model CT-Color Video Monitor, Panasonic Model CP-IOU Color Video Printer, Besq Personal Computer Programmer 1 FARO ARM ANTHRO CAM MODEL S12-05 PORTABLE PRECISION MEASURING SYSTEM, S/N S12059901593 (1999), With Stand
MITUTOYO MODEL B504B 3-AXIS BRIDGE-TYPE CMM

TO 1999

HARSHAW 21 SALT SPRAY ENVIRONMENTAL TEST CHAMBER MICRO-VU VECTOR 12X12 BRIDGE-TYPE VIDEO MEASURING SYSTEM AND FARO ARM ANTHRO CAM MODEL S12-05 PORTABLE PRECISION MEASURING SYSTEM PARTIAL VIEW OF ELECTRONIC TEST & STEREO EQUIPMENT PAGE 5

Toolroom Shop Material Handling Equipment
CLAUSING-COLCHESTER 15 X 52 C.C. QUICK CHANGE GEARED HEAD LATHE
DELTA CRANE SYSTEMS 5-TON X 34 SPAN SINGLE-GIRDER TOP-RUNNING BRIDGE CRANE

TOOLROOM MACHINERY

1 CLAUSING-COLCHESTER 15 X 52 C.C. QUICK CHANGE GEARED HEAD LATHE, S/N LTR50SILFV/3680 A# 00838, Spindle Speeds 25 to 2000 RPM, Threads.0015 to.040 IPR, Feeds 2 to 72 TPI, Hole Thru Spindle 2-1/4, Taper Attachment, Thread Chasing Dial, Coolant System 1 BRIDGEPORT SERIES I 2-HP VARIABLE SPEED VERTICAL MILLING MACHINE, S/N BR230434 (1985), Table Size 9 X 42, Spindle Speeds 60 to 4200 RPM, Power Feed Table, Bijur Lubrication, Acu-Rite III 2-Axis Digital Readout 1 STARTRITE MODEL 24V 24 VERTICAL CONTOUR METAL CUTTING BAND SAW, S/N 114013 A# 00845, Table Size 21 X 21, Blade Speeds 67 to 3840 FPM, Blade Welder/Grinder 1 ROPER WHITNEY MODEL UX 16-GA CAPACITY HAND BOX & PAN BRAKE, S/N 2928-11-96 (1996) A# CRAFTSMAN CONTRACTOR SERIES 10 TILTING ARBOR TABLE SAW, Table Size 27 X 44, Exact-1-RIP 3024 Rip Fence, 3-HP Motor 1 CYCLONE MODEL X 48 SAND BLAST CABINET, S/N 9101, With Dust Collector

BRIDGE CRANE

1 DELTA CRANE SYSTEMS 5-TON X 34 SPAN SINGLE-GIRDER TOP-RUNNING BRIDGE CRANE, S/N 6834 (1997), 6-Way Pendant Control, R&M Spacemaster II 5-Ton Electric Chain Hoist

FORKLIFTS

1 CATERPILLAR 2EC25-50 5000-LB. CAP. ELECTRIC FORKLIFT TRUCK, S/N A2EC260886, Side Shift, Lift 190, Solid Tires, Overhead Guard, 36-Volt 4 NISSAN CYM02L208-40 3700-LB. CAP. ELECTRIC FORKLIFT TRUCKS, S/Ns CYM02-001258 (#5), -001268 (#4), -001231 (#3) (ALL 1988), -004765 (#2) (1994), Side Shift, Lift 187, Solid Tires, Overhead Guard, 36-Volt 5 CROWN 4500-LB. CAPACITY ELECTRIC REACH-TYPE STAND-UP RIDING FORKLIFT TRUCKS (ALL 1997), (4) MODEL RR3520-45, S/Ns 1A180506 (#2), 1A180539 (#3), 1A188988 (#4), 1A180536 (#1), (1) MODEL 3020-45, S/N 1A55502 (#5), All With Side Shift, Lift 210, Solid Tires, Overhead Guard, 36-Volt 2 CLARK MODEL ESM20 3675-LB. CAPACITY ELECTRIC STAND-UP RIDING FORKLIFT TRUCKS, S/Ns ESM245-0145-7827FB (#1), ESM245-03756955FB (#2) (BOTH 1990), Side Shift, Lift 188, Solid Tires, Overhead Guard, S/N ESM245-0145-7827FB (Partially Disassembled) 1 CROWN SP3000 SERIES 3000-LB. NARROW AISLE ELECTRIC ORDER PICKER, S/N 1A2103 (1999), Lift 210, Solid Tires, Overhead Guard, 36-Volt 2 LEE/PRESTO MODEL PS62-50 1500-LB. CAPACITY WALKIE-TYPE ELECTRIC DIE FORKLIFT TRUCKS, S/Ns 99802-01, 99802-02 (BOTH 1999), Lift 72, Built-In Battery Charger

GENIE MODEL GS-1930 500-LB. CAPACITY ELECTRIC SELF-PROPELLED WORK PLATFORM

MACHINE ACCESSORIES

2 ROTARY TABLES, PHASE II 12 PRECISION TILTING, MEDA MACHINE VISES, (1) LIANG J 6 PRECISION, (1) 6, (1) 4TILTING R-8 Collets, Collets, Drill Chucks, Tool Posts, Centers, Etc.

SHOP & FACTORY

1 NOBLES SPEED SCRUB 2701 WALK-BEHIND ELECTRIC FLOOR MACHINE, S/N SS27100006148DQ, 24-Volt 8 BETTER PACK MODEL 55L ELECTRIC TAPE SHOOTERS 6 PORTABLE SCREW GUNS, (2) WEBER MODEL HSP 31-ZSB-242, S/Ns 1102750.07, 1102750.06, (4) DIXON MODEL 750, S/Ns 115, 116, 117, 118, All With Vibratory Bowl Feeders LARGE QUANTITY OF SOLCON H10S ELECTRIC NUT RUNNERS LARGE QUANTITY OF HAK-631 & HAK-937 DIGITAL ELECTRIC SOLDERING UNITS Bench Vises, Benches, Hand Tools, Power Tools, Supply Cabinets, Safety Cabinets, Hand Trucks, Dollies, Shop Carts, Belt Conveyor, Roller Conveyor, Skate Conveyor, Lockers, Tables, Shelving, Racks, Fans, Pallet Trucks, Foremans Desks, Shop Furniture, Tape Shooters, Metro Racks, Shop Vacs, Banding Outfits, Tote Pans, Air Hose, Shop Stools, Worklights, Platform Scales, Safety Ladders, Man Lift, Work Platforms, Small Parts Cabinets, Hot Melt Equipment, Time Clocks, Glue & Paint Pressure Pots, Safety Cans, Tool Boxes, Etc.
MATERIAL HANDLING EQUIPMENT
1 GENIE MODEL GS-1930 500-LB. CAPACITY ELECTRIC SELF-PROPELLED WORK PLATFORM, S/N 16774 (1999), Platform 26 X 60, Max. Height 4000-LB. CAPACITY ELECTRIC WALKIE-TYPE PALLET TRUCKS, (1) DOCKSTOCKER MODEL DSW400, S/N D4W-96-00190 (1996), 24-Volt, (2) PRIMEMOVER MODEL PX-40-W488C, S/Ns 181769, 181767, 12-Volt 20 CROWN, LIFTRITE, BLUE GIANT & BARRETT 5000-LB. CAPACITY HYDRAULIC PALLET TRUCKS 4 JAPANESE MODEL LC-20C 200-KG CAPACITY MANUAL LIFT CARTS 1 MAC TRAC 16W X 7L INCLINED MOTORIZED BELT CONVEYOR, S/N 1297C102897-004-001-01 (1997), Vari-Speed Control, 1/4-HP Motor 9 36-VOLT BATTERY CHARGERS, (3) EXIDE SYSTEM 3000 TYPE F, S/Ns MC11796, MA10350, TO600907-1, (2) KW BATTERY LIFEGUARD FERRORESONANT, S/Ns K11029, N/A, (1) HOBART ACCU-CHARGER, S/N 071999, (2) GENERAL SERIES 7000 PLUS, S/Ns X09301, V149588, (1) GNB FER CHARGER 100, S/N 9500167F 3 BATTERY HANDLING SYSTEMS BATTERY & CHARGER RACKS 1 BATTERY HANDLING SYSTEMS MODEL BTC-24MPR HYDRAULIC BATTERY HANDLER, S/N MR29187

For your appraisal needs, please contact one of DoveBids valuation professionals at 800.665.1043
LEE/PRESTO 1500-LB. DIE FORKLIFT TRUCKS AND PARTIAL VIEW OF PALLET TRUCKS PAGE 6
3 OF 4 NISSAN CYM02L208-40 3700-LB. CAPACITY ELECTRIC FORKLIFT TRUCKS, CROWN 4500-LB. ELECTRIC REACH-TYPE STAND-UP RIDING FORKLIFT TRUCKS AND CROWN SP3000 SERIES 3000-LB. CAP. NARROW AISLE ELECTRIC ORDER PICKER
Plant Support Computer Office Equipment
1 OF 2 LANTECH STRETCH-TYPE PALLET WRAPPERS PARTIAL VIEW OF 170 SECTIONS OF INTERLAKE ADJUSTABLE PALLET RACKING INGERSOLL-RAND MODEL SSR-XF250 250-HP ROTARY SCREW AIR COMPRESSOR

PALLET WRAPPERS

2 LANTECH STRETCH-TYPE PALLET WRAPPERS, (1) Q300, S/N QM004886, Prod. Speed 35 Loads/Hour, Programmable Controls, Drive-On Ramp, (1) LAN-WRAPPER, S/N V1175, Both With Platform Size 65 Diameter, Max. Load Weight 4000-Lbs., Max. Load Size 52L X 52W X 8H, 3/4-HP Motor

AIR COMPRESSORS

1 INGERSOLL-RAND MOD. SSR-XF250 250-HP ROTARY SCREW AIR COMPRESSOR, S/N DE1147U97259 (1997), Ingersoll-Rand Intellisys System, Heat Exchanger, Sound Enclosure 2 INGERSOLL-RAND ROTARY SCREW AIR COMPRESSOSRS, (1) XF-100 100-HP, S/N D8936U8913 (1989), (1) XF-50 50-HP, S/N D6373U886 (1988), Both With Heat Exchanger, Sound Enclosure 1 SPEEDAIRE MODEL 5Z404A 5-HP HORIZONTAL TANK-MOUNTED AIR COMPRESSOR, S/N 100792L-INGERSOLL-RAND MODEL TM1125 THERMAL MASS REFRIGERATED COMPRESSED AIR DRYER, S/N 97KTM505 (1997), Ingersoll-Rand Intellisys System, Sound Enclosure 1 650-GALLON VERT. AIR RECEIVING TANK, S/N 282221

COMPUTER EQUIPMENT

1 DELL POWEREDGE 2300 450-MHZ DUAL PENTIUM III XEON FILE SERVER, 1024-MB, 72-GB Hard Drive, 40X CD ROM Drive, 40-GB DLT Tape Drive 1 DELL POWEREDGE PENTIUM III FILE SERVERS, (1) 6300 450-MHZ, 1024-MB, 54-GB Hard Drive, 40X CD ROM Drive, 40-GB DLT Tape Drive, (1) 4400 400-MHZ, 128-MB, 18-GB Hard Drive, 24X CD ROM Drive 1 COMPAQ PROLIANT 4500 166-MHZ DUAL PENTIUM FILE SERVER, 256-MB, 12-GB Hard Drive, 20-GB DLT Tape Drive 1 INFOTEL ULTRA 266-MHZ PENTIUM II FILE SERVER, 128-MB, 24-GB Disk Drive, 16X CD ROM 1 PIONEX HAL-9000 200-MHZ PENTIUM FILE SERVER, 128-MB, 4.2 GB-Hard Drive, 16X CD ROM 2 DELL POWEREDGE FILE SERVERS, 2200, CODENT 2-LINE INKJET PRINTERS, S/Ns 1888, ZEBRA MODEL Z105 LABEL PRINTERS, S/Ns 6027913, 6117126, 75735-1 (1999), CALCOMP MODEL 4036 DIGITAL PLOTTER OVER (40) COMPUTERS & (30) PRINTERS Workstations, Disk Drives, Switches, Hubs, UPSs, Etc.

SCALES

5 GENERAL ELECTRIC SYSTEMS FREEDOM II/B 100-LB. CAP. DIGITAL PORTABLE PLATFORM SCALES, S/Ns 401146B, 401147B, 401148B, 401149B, 401150B 18 GSE SCALE SYSTEMS MODEL X.005-KG CAPACITY PORTABLE DIGITAL PLATFORM SCALES 1 YAMATO ED1-312 32-KG CAPACITY DIGITAL PLATFORM SCALE, S/N N/A 1 OHAUS MODEL 15S 25-LB./10-KG BENCH-TOP DIGITAL SCALE, S/N JA21764, Platform Size 12 X 12
INGERSOLL-RAND TM1125 THERMAL MASS COMPRESSED AIR DRYER

PALLET RACKING

170 SECTIONS OF INTERLAKE STEEL ADJUSTABLE PALLET RACKING, 9W X 3-1/2D X 15H, Wire Decking (Late Delivery Date to be announced during the auction)

MISCELLANEOUS

1 VERTICAL HYDRAULIC BALER, Bale Size 60 X 30 X 40, Top-Mounted Hydraulic Unit 1 55-GAL. HYD. DRUM COMPACTOR. 1 GRAYMILLS HANDI-KLEEN PH522-A HEATED RECIRCULATING PARTS WASHER, S/N 18FY9, Tank 30 X 23 X 16D, Variable Temp. Control, 1/4-HP 1 LEG-MOUNTED OVERHEAD CONE DRYER, SA# 00800, With (3) Carts

OFFICE EQUIPMENT

4 COPIERS, TOSHIBA 1710, CANON NP6050, SAVIN 9013Z, CANON IMAGERUNNER 330S 2 FAX MACHINES, XEROX 470-CX, PANASONIC KX-FPREPRO-TECHNOLOGY BLUELINER 1000 BLUEPRINT MACHINE 1 PANASONIC & INTER-TEL DIGITAL PHONE SYSTEM Electronic Marker Boards, Desks, Credenzas, Workstations, Chairs, Conference Tables, Lateral Files, File Cabinets, Blueprint Files, Supply Cabinets, Bookcases, Modular Office Cubicles, Office Dividers, Lobby & Lunchroom Furniture, Etc.

TRASH COMPACTOR

1 J.V. MFG. MOD. CCR-02 HYDRAULIC TRASH COMPACTOR, S/N CP6303 (1999), 10-HP Hydraulic Unit

Industrial Real Estate

For Sale
Through Private Negotiations Only
Land Area: 19.1 acres (Additional Parcel 5.74 acres) Building Area: 127,800 sq. ft. Total
55,200 sq. ft. Air-Conditioned Manufacturing Area, 60,960 sq. ft. Warehouse Area, 11,640 sq. ft. Air-Conditioned Office Area
Pre-Engineered Steel Frame With Metal Exterior Walls Year Built: 1988 Original Construction Zoned I-3 (Additional Parcel Agriculture) 14 to 20 Ceiling Heights Varco-Pruden Standing Seam System Roof 2000-Amp, 400/277-Volt, 3-Phase Power 6 Concrete Floor (7) Docks For additional information, please contact Patrick B. Lindley, SIOR 300+ Car Parking (2) Drive-Ins Wet Sprinkler System Colliers Turley Martin Tucker Company Phone: (317) 639-0457

PAGE 7