Contents

Before using

Compact Disc Player

DX-7222

Instruction Manual

Important Safeguards. 2 Precautions.. 3 Features.. 4 Supplied accessories.. 4 Before operating this unit.. 5 System connections. 6

Operation

Playing CDs.. 7 Using the memory function. 10 Useful Functions.. 12

Other informations

Thank you for purchasing the Onkyo CD player. Please read this manual thoroughly before making connections and plugging in the unit. Following the instructions in this manual will enable you to obtain optimum performance and listening enjoyment from your new CD player. Please retain this manual for future reference.
Control positions and names.. 14 Precautions for handling the Compact Disc (CD).. 15 Troubleshooting Guide. 16 Specifications.. 16

WARNING:

TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.

WARNING

RISK OF ELECTRIC SHOCK DO NOT OPEN
RISQUE DE CHOC ELECTRIQUE NE PAS OUVRIR

CAUTION:

TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated dangerous voltage within the products enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.

Important Safeguards

1. Read Instructions All the safety and operating instructions should be read before the appliance is operated. 2. Retain Instructions The safety and operating instructions should be retained for future reference. 3. Heed Warnings All warnings on the appliance and in the operating instructions should be adhered to. 4. Follow Instructions All operating and use instructions should be followed. 5. Water and Moisture The appliance should not be used near water for example, near a bathtub, washbowl, kitchen sink, laundry tub, in a wet basement, or near a swimming pool, and the like. 6. Carts and Stands The appliance should be used only with a cart or stand that is recom- PORTABLE CART WARNING mended by the manufacturer. 6A. An appliance and cart combination should be moved with care. Quick stops, excessive force, and uneven surfaces may cause the appliance and cart combination to overturn.

S3125A

7. Wall or Ceiling Mounting The appliance should be mounted to a wall or ceiling only as recommended by the manufacturer. 8. Ventilation The appliance should be situated so that its location or position does not interfere with its proper ventilation. For example, the appliance should not be situated on a bed, sofa, rug, or similar surface that may block the ventilation openings; or if placed in a built-in installation, such as a bookcase or cabinet that may impede the ow of air through the ventilation openings, there should be free space of at least 5 cm (2 in.) and an opening behind the appliance. 9. Heat The appliance should be situated away from heat sources such as radiators, heat registers, stoves, or other appliances (including ampliers) that produce heat.
10. Power Sources The appliance should be connected to a power supply only of the type described in the operating instructions or as marked on the appliance. 11. Polarization If the appliance is provided with a polarized plug having one blade wider than the other, please read the following information: The polarization of the plug is a safety feature. The polarized plug will only t the outlet one way. If the plug does not t fully into the outlet, try reversing it. If there is still trouble, the user should seek the services of a qualied electrician. Under no circumstances should the user attempt to defeat the polarization of the plug. 12. Power-Cord Protection Power-supply cords should be routed so that they are not likely to be walked on or pinched by items placed upon or against them, especially near plugs, convenience receptacles, and the point where they exit from the appliance. 13. Cleaning The appliance should be cleaned only as recommended by the manufacturer. 14. Nonuse Periods The power cord of the appliance should be unplugged from the outlet when left unused for a long period of time. 15. Object and Liquid Entry Care should be taken so that objects do not fall and liquids are not spilled into the enclosure through openings. 16. Damage Requiring Service The appliance should be serviced by qualied service personnel when: A. The power-supply cord or the plug has been damaged; or B. Objects have fallen, or liquid has been spilled into the appliance; or C. The appliance has been exposed to rain; or D. The appliance does not appear to operate normally or exhibits a marked change in performance; or E. The appliance has been dropped, or the enclosure damaged. 17. Servicing The user should not attempt to service the appliance beyond that described in the operating instructions. All other servicing should be referred to qualied service personnel.

This unit contains a semiconductor laser system and is classied as a CLASS 1 LASER PRODUCT. So, to use this model properly, read this Instruction Manual carefully. In case of any trouble, please contact the store where you purchased the unit. To prevent being exposed to the laser beam, do not try to open the enclosure.

For European model:

CLASS 1 LASER PRODUCT

DANGER:

INVISIBLE LASER RADIATION WHEN OPEN AND INTERLOCK FAILED OR DEFEATED. AVOID DIRECT EXPOSURE TO BEAM. This label on the rear panel states that: 1. This unit is a CLASS 1 LASER PRODUCT and employs a laser inside the cabinet. 2. To prevent the laser from being exposed, do not remove the cover. Refer servicing to qualied personnel.
THIS PRODUCT UTILIZES A LASER. USE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE OF PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN MAY RESULT IN HAZARDOUS RADIATION EXPOSURE.

Precautions

For U.S. model
The laser is covered by a housing which prevents exposure during operation or maintenance. However, this product is classied as a Laser Product by CDRH (Center for Devices and Radiological Health) which is a department of the Food and Drug Administration. According to their regulations 21 CFR section 1002.30, all manufactures who sell Laser Products must maintain records of written communications between the manufacturer, dealers and customers concerning radiation safety. If you have any complaints about instructions or explanations affecting the use of this product, please feel free to write to the address on the back page of this manual. When you write us, please include the model number and serial number of your unit. In compliance with Federal Regulations, the certication, identication and the period of manufacture are indicated on the rear panel. FCC INFORMATION FOR USER

For British model

Replacement and mounting of an AC plug on the power supply cord of this unit should be performed only by qualied service personnel.

IMPORTANT

The wires in the mains lead are coloured in accordance with the following code: Blue : Neutral Brown : Live As the colours of the wires in the mains lead of this apparatus may not correspond with the coloured markings identifying the terminals in your plug, proceed as follows: The wire which is coloured blue must be connected to the terminal which is marked with the letter N or coloured black. The wire which is coloured brown must be connected to the terminal which is marked with the letter L or coloured red.
A 5 amp fuse is tted in this plug. Should the fuse need to be replaced, please ensure that the replacement fuse has a rating of 5 amps and that it is approved by ASTA or BSI to BS1362. Check for the ASTA mark or the BSI mark on the body of the fuse. IF THE FITTED MOULDED PLUG IS UNSUITABLE FOR THE SOCKET OUTLET IN YOUR HOME, THEN THE FUSE SHOULD BE REMOVED AND THE PLUG CUT OFF AND DISPOSED OF SAFELY. THERE IS A DANGER OF SEVERE ELECTRICAL SHOCK IF THE CUT OFF PLUG IS INSERTED INTO ANY 13 AMP SOCKET. If in any doubt, please consult a qualied electrician.
The user changes or modications not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help.

For Canadian model

CAUTION: THIS DIGITAL APPARATUS DOES NOT EXCEED THE CLASS B LIMITS FOR RADIO NOISE EMISSION FROM DIGITAL APPARATUS SET OUT IN THE RADIO INTERFERENCE REGULATIONS OF THE CANADIAN DEPARTMENT OF COMMUNICATIONS.
For models having a power cord with a polarized plug:
CAUTION: TO PREVENT ELECTRIC SHOCK, MATCH
WIDE BLADE OF PLUG TO WIDE SLOT, FULLY INSERT.
Declaration of Conformity
We, ONKYO EUROPE ELECTRONICS GmbH INDUSTRIESTRASSE GERMERING, GERMANY declare in own responsibility, that the ONKYO product described in this instruction manual is in compliance with the corresponding technical standards such as EN60065, EN55013, EN55020 and EN61000-3-2, -3-3 (or EN60555-2, -3) GERMERING, GERMANY

Features

36-Track Random Memory (Remote controller only) s 8-times oversampling digital lter s Shufe play (Remote controller only) s 20-track music calendar s Time edit (calculates number of tracks that will t on a cassette) (Remote controller only) s 10-key direct track access (Remote controller only) s Headphone jack with volume control s Peak search (Remote controller only) s Memory and Memory reverse
A convenient feature that lets you easily eliminate tracks you dont want to hear or record.
Next selection (Remote controller only) s Five mode repeat function: entire side, single track, A-B, memory and shufe s Two optical digital outputs s Compatible Remote Control Supplied
Memory Preservation This unit does not require memory preservation batteries. A built-in memory power back-up system preserves the contents of the memory during power failures and even when the POWER switch is set to off. The POWER switch must be set to on in order to charge the back-up system. The memory preservation period after the unit has been turned off varies depending on climate and placement of the unit. On the average, memory contents are protected over a period of a few weeks after the last time the unit has been turned off. This period is shorter when the unit is exposed to a highly humid climate.

Supplied accessories

Check that the following accessories are supplied with this unit.

AY PL IS D

T EA EP R

Y R O EM M

CH A B

Audio connection cable 1

SE NE LECT XT ION LE FF U SH

AR LE C

cable 1
Remote controller 1 Batteries (size AA, R6 or UM-3) 2
R E M O TE C O N TR O LL E R R C -C
Before operating this unit
Setting the Voltage selector (Worldwide models only)
Worldwide models are equipped with a voltage selector to conform with local power supplies. Be sure to set this switch to match the voltage of the power supply in your area before plugging in the unit. 1. Determine the proper voltage for your area: 220-230 V or 120 V. 2. If the preset voltage is not correct for your area, insert a screwdriver into the groove in the switch. Slide the switch all the way to the right (120 V) or to the left (220-230 V), whichever is appropriate.

ANALOG OUTPUT

DIGITAL OUTPUT

OPTICAL 1

OPTICAL 2

REMOTE CONTROL

COMPACT DISC PLAYER

MODEL NO. DX-7222

RATING:

220-230V 120V

VOLTAGE SELECTOR

220-230V

Installing the remote controller batteries
1. Remove the battery compartment cover by opening it as shown in the illustration. 2. Insert two AA (R6- or UM-3)-size batteries into the battery compartment. Carefully follow the polarity diagram (positive (+) and negative () symbols) inside the battery compartment. 3. After batteries are installed and seated correctly, replace the compartment cover. Notes Do not mix new batteries with old batteries or different kinds of batteries. To avoid corrosion, remove the batteries if the remote controller is not to be used for a long time. Remove dead batteries immediately to avoid damage from corrosion. If the remote controller doesnt operate smoothly, replace both the batteries at the same time. The life of the batteries supplied is about six months but this will vary depending on usage.
Using the remote controller
Point the remote controller toward the remote control sensor. Notes Place the unit away from strong light such as direct sunlight or inverted uorescent light which can prevent proper operation of the remote controller. Using another remote controller of the same type in the same room or using the unit near equipment which uses infrared rays may cause operational interference. Do not put any object such as a book on the remote controller. The buttons of the remote controller may be pressed by mistake and drain the batteries. Make sure the audio rack doors do not have colored glass. Placing the unit behind such doors may prevent proper remote controller operation. If there is any obstacle between the remote controller and the remote control sensor, the remote controller will not operate.

Remote control sensor

PEAK SEAR CH A B

MEM ORY REP EAT

SELE T N NEX CTIO

REMO TE

CONT ROLLE R RC-40 2C

approx. 5 m (16 feet)

AR CLE

System connections

Connecting other components
Do not plug in the AC power cord until all other connections have been made. On each pair of input or output jacks, the jack marked R corresponds to the right channel, and the jack marked L to the left Avoid bundling the audio connection cables with the power cord or speaker cables. Doing so may degrade sound reproduction. Insert the plugs and connectors securely. Remember that improper connection can result in noise, poor performance, or damage to the equipment. channel. Refer to the ampliers instruction manual for further information on connections.

Improper connection

Insert completely
Terminal protection caps are attached to the DIGITAL OUTPUT terminals. Remove the cap for the terminal you wish to use when connecting the DX-7222 to digital equipment. Replace the caps if you are not using the DIGITAL OUTPUT terminals.
Audio connection cable Connecting an Onkyo product with connectors enables you to use the System function.

To AC outlet

(REC) jack
Optical ber cable (not included)
DIGITAL IN MD player, DAT, etc. with digital inputs
DIGITAL IN Amplier, Tuner amplier with digital inputs
Amplier without digital inputs
A Connection with the amplier
Connect the DX-7222 to the CD jacks of your amplier. B Connection via the digital output terminal (DIGITAL OUTPUT) Connection to digital equipment, such as an MD recorder or DAT. Use an optical cable to connect this unit to the digital input terminal of an MD recorder or DAT in order to make digital recordings. The optical cable should have connectors which t into the digital terminals. C Connections for remote control When the DX-7222 is connected to an amplier with the Onkyo jack, pressing the CD operation button on the ampliers remote controller enables you to operate the CD player. Note: The upper and lower remote control jacks have the same function. Remote control operation is not possible when only the remote control cable is connected the audio cables must also be connected. An cable equipped with a 1/8" (3.5mm) diameter miniature two-conductor phone plug is included with the DX7222 and with every tuner, compact disc player or cassette tape deck with the symbol.
D Connecting the AC power cord and turning the
power on 1. Insert the AC power cord into a wall outlet. 2. Press the POWER ON/OFF button. The display will light. Note: To insert the AC power cord into an AC outlet on the rear panel of another component, use the UNSWITCHED outlet.

Playing CDs

POWER Disc tray PAUSE STOP PLAY

DISPLAY

REPEAT

MEMORY

NEXT SELECTION

TIME EDIT

PEAK SEARCH A B

SHUFFLE

OPEN/CLOSE
REMOTE CONTROLLER RC-402C

Remote controller

Normal play
1. Press the POWER button to turn on the power. 2. Press the OPEN/CLOSE button. 3. Put the disc in the disc tray, with the label side of the disc facing up. 4. Press the OPEN/CLOSE button. 5. Press the PLAY button. The CD player will play the rst track (track 1). * If you want to, you can skip step 4 by pressing the PLAY button instead of the OPEN/CLOSE button. The disc tray will close automatically and play track 1. If the CD player does not start playing when the PLAY button is pressed: The disc may be upside down in the tray. Press the OPEN/ CLOSE button to open the disc tray. If you cannot read the label on the disc, turn the disc over. Moisture may have formed inside the CD player. Remove the disc from the disc tray and leave the power on for about one hour to evaporate the moisture. Using the timer for play The CD player starts playing the loaded CD automatically as soon as power is supplied. Using this feature, you can enjoy timer play using your audio timer. For instructions on how to set the timer, see the instruction manual supplied with the timer.

Label side

TRACK DISC

TOTAL REMAIN

Contents of the display
Before starting play after you have inserted a disc

SINGLE ELAPSED

a The total number of tracks on the disc b All of the track numbers on the disc (When the number of tracks exceeds 20, the OVER indicator lights.) c The total playing time of the disc After starting play d The track number currently being played e The next track number f The elapsed time of the current track The display can be changed by pressing the DISPLAY button.

Stopping play

Press the STOP button.
Stopping play temporarily
Press the PAUSE button. The PAUSE indicator will light. To resume play, press the PLAY button or the ton. The PAUSE indicator will turn off.

PAUSE but-

PLAY PHONES PHONES LEVEL

DISPLAY , ,

1 9, 0, +10
Listening with the headphones
Plug the headphones with a standard binaural (stereo) plug into
the PHONES jack, and then adjust the sound level using the PHONES LEVEL knob. Turn the knob clockwise to increase the sound level; turn it counterclockwise to decrease the sound level.

DISPLAY button

Press the DISPLAY button during play to switch the time display among the following three modes: a TOTAL REMAIN: Shows how much playing time is left for the entire disc. b SINGLE ELAPSED: Shows how long the current track has been playing. c SINGLE REMAIN: Shows how much time is left for the track currently playing.

SINGLE REMAIN

Search play
Hold down the / or / button during play. Release your nger when the music you would like to listen to is reached. The music will start playing from that point.

Skip play

1. Each time the / button (or the button on the remote controller) is pressed, the pickup will advance one track; and each time the / button (or the button on the remote controller) is pressed, the pickup will go back one track. Press these buttons until the desired track number is selected. 2. Press the button to begin play. When the / button (or the button on the remote controller) is pressed once while playing, the pickup will return to the beginning of the current track and play it.
Starting play from a given track (Remote controller only)
1. Select the track number you wish to play, using the number buttons and the +10 button. 2. The CD player starts playing automatically.

SHUFFLE A-B

RC-402C

REMOTE CONTROLLER

Repeating play (Remote controller only)
Press the REPEAT button to enter the repeat play mode. Repeat play can be used in conjunction with normal, memory, and shufe play modes.

REPEAT REPEAT

REPEAT 1
Full repeat (Repeating all tracks on a disc) Press the REPEAT button once. During normal play When the last track on the CD nishes, the CD player starts playing from the rst track on the CD. During memory play When the last track in memory nishes, the CD player starts playing from the rst track in memory. During shufe play When the last track in shufe play nishes, the CD player starts playing the CD again, in a different order. Press the REPEAT button to cancel repeat play. The REPEAT indicator will turn off. Single repeat Press the REPEAT button twice. Before starting play The CD player will play the rst track repeatedly. During play The CD player will play the current track repeatedly. Press the REPEAT button to cancel repeat play. The REPEAT indicator will turn off. Block repeat (Repeating a block of music) You can repeatedly play a part between the start and end points specied with the A-B button. Follow the procedure below while a CD is playing. 1. Press the A-B button at the beginning of the block repeat. (Point A) 2. Press the A-B button at the end of the block repeat. (Point B) The section between A and B will be played repeatedly. Note: You can specify A and B points beyond a track. This function is not available during memory play, repeat play (full repeat and single repeat), shufe play, and time edit play. Press the A-B button once again to cancel block repeat play.

Flashes

Lights

Point A

Point B

Shufe play

Press the SHUFFLE button. In shufe play mode, the CD player will play the tracks in random order. The auto space function will insert 3 seconds of blank time between tracks during shufe play. Play automatically begins. This function can be used in memory mode. In this case, the programmed tracks are played at random. Press the SHUFFLE button to cancel shufe play. The SHUFFLE indicator will turn off. Note: In shufe play repeat mode, when all of the tracks have been played once, play will be repeated with a different track progression.
Using the memory function
Up to 36 tracks can be stored in memory.

STOP PLAY

MEMORY CLEAR 1 9, 0, +10

/ CLEAR MEMORY

Storing a program into memory and playing it
1. Press the MEMORY button. 2. Select the desired track number, using the and buttons and press the MEMORY button. To enter further track numbers into memory, repeat this procedure. You can store maximum of 36 tracks in memory. * If you use the remote controller, press the number buttons to select the desired track. 3. When you press the PLAY button, the CD player will play the tracks in the order you selected. Note: If more than 36 tracks are selected, FL will ash in the memory channel display area to indicate that the memory is full. If the MEMORY button is pressed during play, the current track being played is stored in memory.

1 MEMORY 6 11

Before starting play
Example: After storing tracks 2, 3, 5, 6, 9 and 12 in memory. a The selected track numbers b Memory channel c The total playing time of selected tracks During play d Track number 2 is currently being played (the rst track in memory). e Next track number in memory f Time elapsed in track currently playing g The remaining track numbers in memory

MEMO CH

2 MEMORY 6 12

Stopping a memory play

Press the

STOP button.

Memory reverse function
When track numbers 2, 4, 6, 8 and 10 have been stored in memory, Press the MEMORY button. All tracks which have not been stored in memory will be stored in memory, replacing the previous contents. When you press the PLAY button, the CD player will start playing.

1 MEMORY 6

Clearing the last track stored
Press the CLEAR button. The last track programmed in memory is cleared.

Canceling the memory play
Press the STOP button while the CD player is in stop mode. The contents of the memory are completely cleared.

SPACE indicator

A 3-second silence will be automatically added between tracks during memory play (the SPACE indicator will ash). However, during normal sequential play this space will not be inserted.
Checking what is stored in memory
1. When the CD player stops during memory play, the last program number stored in memory will be shown in the display. 2. When you press the button, the display will show each track number stored in memory, in turn. a The selected track numbers b Memory channel and stored track number in memory channel c The playing time of track

Useful Functions

1 9, 0, +10 TIME EDIT NEXT SELECTION
Selecting the next track for play
1. During playback, press the NEXT SELECTION button. 2. While the is ashing, select the next desired track using the number buttons and the +10 button. After playing the current track, the selected track will be played. Note: The Memory Play or the Shufe Play mode, if appropriate, will be canceled before the playing of the specied track begins.

Time edit function

This function can be used when recording from a CD to a cassette tape. Make sure that you cancel the memory mode before using this function.

TIME EDIT TOTAL REMAIN

1. Press the TIME EDIT button. Pressing this button will change the Track Number display from .. These numbers indicate the length of the tape. a Tape length. b The track numbers to be recorded onto side A will be displayed in a box. c This is the total time for the tracks on side A. This changes to the display for side B ( ) after 2 or 3 seconds. Pressing the DISPLAY button will show the display for the A side again. Each time the skip buttons are pressed, the tape length will change by 1 minute. Use number buttons and + 10 button to directly enter the length of the tape. The maximum setting is 99 minutes. 2. Press the PLAY button. The CD player starts playing from the rst track on the disc to be recorded onto side A. When the last track on side A is completed, the pause mode is automatically set. 3. Press the PLAY button again. The pause mode is canceled and the CD player starts playing the remaining tracks for recording onto side B. Note: The time edit mode does not function for discs with more than 20 tracks, or when the rst track is longer than half the indicated length of the tape. During time edit play, buttons other than STOP, OPEN/CLOSE, and DISPLAY cannot be used for input.

AB PEAK SEARCH

Peak search

PEAK SEARCH

This function searches for the peak sound level on the disc. When using the memory mode, press the MEMORY button to return to normal mode. 1. Press the PEAK SEARCH button. The CD player checks the disc for the highest sound level. The PEAK SEARCH indicator will ash during this operation. When the search is complete, the indicator will light. 2. Press the A-B button. P appears in the memory channel display area and ashes. 3. Press the PLAY button. The section of the disc with the highest sound level will be played repeatedly for 6 seconds. Refer to this level when recording the disc onto a cassette tape. 4. Press the STOP button. The CD player stops. This level is stored until the OPEN/CLOSE button is pressed or the power is turned off. To repeat the 6-seconds playback of the peak level, follow steps 2, 3, and 4 when the CD player is stopped. Pressing the PEAK SEARCH button will turn off the PEAK SEARCH indicator and the level will be cleared from the memory. Pressing the A-B button after pressing the PLAY button will start the block repeat operation. Note: Depending on the disc playing, memorizing of a level which is not the maximum audible level could occur. This is due to the CD players microprocessor memorizing inaccurate information because of aws in the disc itself, or recording conditions. Under such circumstances, the recording level for the cassette tape may be very low, or else distortion or similar symptoms could arise on account of excessively high signal levels. To avoid this, be sure to reset the recording level of the cassette deck if such symptoms occur.

12 cm Audio 8 cm (CD single) 74 minutes

20 minutes

2. A dry, soft cloth may be used to wipe dust and ngerprints off the surface of CDs. Do not use volatile agents on discs, such as thinner or benzine. Also, do not use conventional record cleaner or antistatic agents.
You cannot play back discs other than those listed above. Do not use discs that are not audio discs (e.g. CD-ROMs for use with personal computers), as these could damage the speakers and amplier.
Do not place a CD in direct sunlight or locations subject to high Do not store a CD in this unit tray for a long period of time.
humidity or low temperature.
Avoid using heart-shaped or octagonal discs. playing irregularly shaped discs may damage the internal mechanism of the unit. Do not use discs on which adhesive from adhesive tape or a disc label (if it is a rental disc) remains. Otherwise, you may not be able to eject the discs or the unit may become inoperative.

Troubleshooting Guide

No power.
Cause: Power cable is not properly plugged into the AC outlet. Remedy: Insert the power plug rmly.

Specications

Signal readout system: Reading rotation: (constant linear velocity) Linear velocity: Error correction system: D/A converter: Sampling frequency: Number of channels: Frequency response: Total harmonic distortion: Dynamic range: Signal to noise ratio: Channel separation: Wow and Flutter: Output level: Power consumption: Power supply: Dimensions (W H D): Weight: Optical non-contact About 500 - 200 r.p.m. 1.2 - 1.4 m/s Cross Interleave Reed-Solomon code 1 bit PWM/ACCUPULSE 352.8 kHz (8 times oversampling) 2 (stereo) 5 Hz - 20 kHz 0.005% (at 1 kHz) 96 dB 90 dB 85 dB (at 1 kHz) Below threshold of measurability 2 volts r.m.s. 9 watts 120 V, 60 Hz 230V, 50 Hz 220-230V/120V switchable, 50/60 Hz 308 mm (17-1/8" 3-9/16" 12-1/8") 3.7 kg (8.2 lbs.)
A disc is loaded in the disc tray, but playback will not start.
Cause: A disc in the disc tray may be upside down. Remedy: Load the disc with the label facing upward. Cause: The disc is dirty. Remedy: Clean the disc. Cause: Moisture has accumulated inside the CD changer. Remedy: Remove the disc from the disc tray, place the CD changer in a warm place, and leave the power on for about one hour.

No sound is heard.

Cause: Connections may be incomplete or incorrect. Remedy: Check all cable connections. Insert all the plugs rmly into the jacks. Cause: The input selector switch on the amplier may be set incorrectly. Remedy: Set the switch to the proper position. See your ampliers operating instructions for more information.

Disc playback skips.

Cause: The disc is dirty. Remedy: Clean the disc. Cause: A disc is scratched. Remedy: Replace the disc. Cause: The CD changer is subject to being accidentally bumped. Remedy: Place the CD changer in a more stable location.
Specications and features are subject to change without notice.
Search time (when locating a specic track) is extremely long.
Cause: The disc is dirty. Remedy: Clean the disc. Cause: The disc is scratched. Remedy: Replace the disc.
Track numbers cannot be stored in memory.
Cause: No disc in the tray. Remedy: Load a disc in the tray. Cause: You have entered a track number that does not exist on the disc. Remedy: Use only the track numbers that exist on the disc.
Front panel controls function correctly, but remote controller does not. Cause: No batteries in remote controller. Remedy: Insert batteries. Cause: Batteries have worn out. Remedy: Replace batteries. This unit contains a sensitive microcomputer, which under certain circumstances might fail to operate due to excessive noise interference. In such case, switch off the main power by pressing the POWER switch, wait ve seconds, then switch it on again.
Sales & Product Planning Div. : 2-1, Nisshin-cho, Neyagawa-shi, OSAKA 572-8540, JAPAN Tel: 0720-31-8111 Fax: 0720-33-5222 http://www.onkyo-intl.com ONKYO U.S.A. CORPORATION 18 Park Way, Upper Saddle River, N.J. 07458, U.S.A. Tel: 201-785-2600 Fax: 201-785-2650 http://www.onkyousa.com ONKYO EUROPE ELECTRONICS GmbH Liegnitzerstrasse 6, 82194 Groebenzell, GERMANY Tel: +49-8142-4401-0 Fax: +49-8142-4401-555 http://www.onkyo.net ONKYO CHINA LIMITED Units 2102-7, Metroplaza Tower I, 223 Hing Fong Road, Kwai Chung, N.T., HONG KONG Tel: 852-2429-3118 Fax: 852-2428-9039 http://www.onkyochina.com
HOMEPAGE http://www.onkyo.co.jp/

I9907-1