Onkyo HT-R550, size: 2.8 MB
Here you can find all about Onkyo HT-R550 like manual and other informations. For example: hdmi, price, receiver, specs, review.
Onkyo HT-R550 manual (user guide) is ready to download for free.
On the bottom of page users can write a review. If you own a Onkyo HT-R550 please write about it to help other people.
[ Report abuse or wrong photo | Share your Onkyo HT-R550 photo ]
User reviews and opinions
|n6gn||3:58am on Monday, November 1st, 2010|
|This unit replaces a 12 year old Onkyo unit so most of my speaker locations were already wired. I removed the old speakers.|
|Silver||7:46am on Saturday, October 9th, 2010|
|I decided to replace a component receiver with this product and am quite happy with it after 2 days. Solid sound. Easy setup.|
|sadine||8:09pm on Tuesday, August 31st, 2010|
|I replaced the speakers with some decent Polk ones and considered the Onkyo speaker "system" a total loss for this purchase tuner has a ton of flexib...|
|GeorgK||9:13am on Wednesday, June 9th, 2010|
|sounds good and has lots of connections went out within 4 months and having it repaired by "onkyo certified repair centers is a nightmare" not to ment... Got this on sale $499 and free shipping, if you see this for that price and are thinking about getting one dont let this pass and get a cheaper model.|
Comments posted on www.ps2netdrivers.net are solely the views and opinions of the people posting them and do not necessarily reflect the views or opinions of us.
Enjoying Home Theater
Speaker Sets A and B
You can use two sets of speakers with the AV receiver: speaker set A and speaker set B. Speaker set A (included speakers) should be used in your main listening room for up to 7.1-channel playback.
*While speaker set B is on, speaker set A is reduced to 5.1-channel playback.
Speaker set B (not included) can be used in another room and offers 2-channel stereo playback.
*Only analog input sources are output by speaker set B.
GUIDE TOP MENU
TUNING A SPEAKERS
MULTI CH DVD VCR/DVR CBL/SAT AUX TAPE TUNER CD
SETUP ENTER RETURN
SP A / B
VIDEO L AUDIO R
DISPLAY DIGITAL INPUT
MEMORY TUNING MODE
Speaker set A On
Speaker set B On Off
Output Set A: 5.1 channels Set B: 2 channels Set A: 7.1 channels Set B: 2 channels No sound
Main Room (speaker set A, the supplied speakers)
Center speaker Front left speaker Subwoofer Front right speaker
Sub Room (speaker set B)
Surround left speaker Surround back left speaker Surround back right speaker
Surround right speaker
* While speaker set B is on, the surround back speakers output no sound.
* Digital input sources are not output by speaker set B. Connect your source component with an analog connection.
Make sure you have the following items:
AV receiver (HT-R550)
Surround and Surround back speakers (SKM-550S/SKB-550)
Remote controller and two batteries (AA/R6)
Indoor FM antenna
Speaker cable for front speakers 11 ft. (3.5 m)
AM loop antenna
Speaker cable for center speaker 10 ft. (3 m)
Speaker setup microphone
Speaker terminal tool
Speaker cables for surround speakers 30 ft. (9 m)
RCA cable for subwoofer connection 10 ft. (3 m)
Front speakers (SKF-550F) 4 oor pads for the subwoofer
Center speaker (SKC-550C)
* In catalogs and on packaging, the letter at the end of the product name indicates the color. Specications and operation are the same regardless of color.
I TEST TONE, CH SEL, LEVEL-, and LEVEL+
buttons (47, 59) Used to adjust the level of each speaker.
J DISPLAY button (43)
K REMOTE MODE buttons (14)
Used to select the remote controller modes. When a remote controller button is pressed, the REMOTE MODE button for the currently selected mode lights up.
L SLEEP button (47)
Used with the Sleep function.
M VOL [ ]/[ ] button (42)
Adjusts the volume of the AV receiver regardless of the currently selected remote controller mode.
N MUTING button (46)
Mutes or unmutes the AV receiver.
O RETURN button
P CINE FLTR button (52)
Used with the CinemaFILTER function.
Q L NIGHT button (52)
Used with the Late Night function.
By default, the remote controller is set to control an Onkyo DVD player. To select your DVD player as the input source, press:
A STANDBY/ON button
Sets the DVD player to On or Standby.
B Number buttons
Used to enter title, chapter, and track numbers and times for locating specic points.
C DISC +/ button
Selects discs on a DVD changer.
D TOP MENU button
Selects a DVDs top menu.
E Arrow [ ]/[ ]/[ ]/[ ] and ENTER buttons
Used to navigate DVD menus and the DVD players onscreen setup menus.
F SETUP button
STANDBY/ON REMOTE MODE
Used to access the DVD players onscreen setup menus.
G Playback buttons
From left to right: Pause, Play, Stop, Fast Reverse, Fast Forward, Previous, and Next.
H SUBTITLE button
I AUDIO button
Selects foreign language soundtracks and audio formats (e.g., Dolby Digital or DTS).
J DISPLAY button
Displays information about the current disc, title, chapter, or track, including elapsed time, remaining time, total time, and so on.
SP A / B MUTING ENTER PLAYLIST/CAT PLAYLIST/CAT
K CLR button
Cancels functions and clears entered numbers.
L MENU button
Displays a DVDs menu.
M RETURN button
Exits the DVD players onscreen setup menus.
N RANDOM button
Used with the random playback function.
O REPEAT button
Used with the repeat playback functions.
AUDIO SUBTITLE RANDOM REPEAT TEST TONE CH SEL PLAY MODE DISPLAY VCR L NIGHT DVD CINE FLTR HDD LEVEL-
N O P Q
P VCR, DVD, and HDD buttons
Used to select VCR, HDD (hard disk drive), or DVD playback on a VCR/DVD recorder with a built-in hard disk drive.
Q PLAY MODE button
Selects play modes on components with selectable play modes.
IN FRONT SURROUND
(DS-A1 hookup shown here.)
Connecting a Cassette, CDR, MiniDisc, or DAT Recorder
Step 1: Choose a connection that matches the recorder ( a , b , or c ), and then make the connection.
Connect one or the other These connections must be assigned (see page 41)
R IN OUT REC PLAY
Cassette recorder, CDR, etc.
With connection a , you can listen via speaker set B. To connect the recorder digitally, use connections a and b , or a and c.
Connection a b c AV receiver TAPE IN L/R TAPE OUT L/R DIGITAL IN COAXIAL 2 DIGITAL IN OPTICAL 1 Signal ow Cassette/CDR/MD/DAT recorder Analog audio L/R output Analog audio L/R input Digital coaxial output Digital optical output
Connecting Onkyo Components
Step 1: Make sure that each Onkyo component is connected to the AV receiver with an analog audio cable (connection a in the hookup examples) (see pages 27 to 34). Step 2: Make the connection. Step 3: If youre using an MD, CDR, or RI Dock, change the input Display (see page 41). With (Remote Interactive), you can use the following special functions:
Auto Power On/Standby When you start playback on a component connected via , if the AV receiver is on Standby, it will automatically turn on and select that component as the input source. Similarly, when the AV receiver is set to Standby, all components connected via will also go on Standby. This function will not work on components connected to an AC OUTLET on the AV receiver. Direct Change When playback is started on a component connected via , the AV receiver automatically selects that component as the input source. If your DVD player is connected to the AV receivers multichannel DVD input, youll need to press the [MULTI CH] button to hear all channels (see page 43), as the Direct Change function only selects the FRONT DVD IN jacks. Remote Control You can use the AV receivers remote controller to control your other -capable Onkyo components, pointing the remote controller at the AV receivers remote control sensor instead of the component. You must enter the appropriate remote control code rst (page 63). Notes: Use only cables for connections. cables are supplied with Onkyo players (DVD, CD, etc.). Some components have two jacks. You can connect either one to the AV receiver. The other jack is for connecting additional -capable components. Connect only Onkyo components to jacks. Connecting other manufacturers components may cause a malfunction. Some components may not support all functions. Refer to the manuals supplied with your other Onkyo components.
IN L R
e.g., CD player
R L ANALOG AUDIO OUT
e.g., DVD player
Connecting the Power Cord
Connect the AV receivers power cord to a suitable wall outlet. Notes: Before connecting the power cord, connect all of your speakers and AV components. Turning on the AV receiver may cause a momentary power surge that might interfere with other electrical equipment on the same circuit. If this is a problem, plug the AV receiver into a different branch circuit.
Turning On the AV Receiver
STANDBY/ON STANDBY indicator
--/--AUX INPUT PHONES
Turning On and Standby
Press the [STANDBY/ON] button. Alternatively, press the remote controllers [RECEIVER] button, followed by the [STANDBY/ON] button. The AV receiver comes on, the display lights up, and the STANDBY indicator goes off. To turn the AV receiver off, press the [STANDBY/ON] button again. The AV receiver will enter Standby mode. To prevent any loud surprises when you next turn on the AV receiver, always turn down the volume before you turn it off. To turn on the subwoofer, press its [POWER] switch to the ON position (not North American models).
Smooth Operation in a Few Easy Steps
To ensure smooth operation, heres a few easy steps to help you congure the AV receiver before you use it for the very rst time. These settings only need to be made once. Do the automatic speaker setupthis is essential! See Automatic Speaker Setup (Audyssey 2EQ/HTIB) on page 37. Have you connected a component to an HDMI IN? If you have, see HDMI Video Setup on page 40.
Have you connected a component to a digital audio input? If you have, see Digital Audio Input Setup on page 41.
Have you connected an Onkyo MD recorder, CD recorder, or RI Dock? If you have, see Changing the Input Display on page 41.
CD recorder, MD recorder, RI Dock
This section explains the settings that you need to make before using the AV receiver for the very rst time.
Automatic Speaker Setup (Audyssey 2EQ/HTIB)
With the supplied speaker setup microphone, the Audyssey 2EQ/HTIB function can measure the number of speakers connected, their sizes, crossover frequencies, and distances from the listening position, and then calculate the optimal speaker settings for your listening environment. Before using this function, connect and position all of the supplied speakers.
To create a listening area in which several people can enjoy home theater simultaneously, the Audyssey 2EQ/HTIB function takes measurements at three points within the listening area:
A First measurement point
This is the center point of the listening area, or the listening position if its just one person.
B Second measurement point
The right side of the listening area.
C Third measurement point
The left side of the listening area. The distances between points 1 and 2 and points 1 and 3 must be at least 1 meter. From the examples below, choose the listening area that best matches yours and place the microphone accordingly when prompted.
: Listening area : Listening position
First Time SetupContinued
Using Audyssey 2EQ/HTIB
MASTER VOLUME STANDBY/ON
Notes: If the AV receiver was previously muted, it will be unmuted. Automatic speaker setup cannot be performed while a pair of headphones is connected. It takes about 10 minutes to complete the automatic speaker setup.
When the following display appears, move the speaker setup microphone to measurement point 2 (page 37), and then press [ENTER].
Turn on the AV receiver. Put the speaker setup microphone at measurement point 1 (page 37), and connect it to the SETUP MIC jack.
Audyssey 2EQ/HTIB performs more measurements. This takes a few minutes.
Notes: Make sure the microphone is horizontal. If theres an obstacle between the microphone and any speaker, the automatic setup will not work correctly. Set up the room as you would when enjoying a DVD. Positioning the microphone close to where your ears would normally be will provide better results. You can adjust the height of the microphone by using a tripod or level table.
When the following display appears, move the speaker setup microphone to measurement point 3 (page 37), and then press [ENTER].
Audyssey 2EQ/HTIB performs more measurements. This takes a few minutes. When the measurements are complete, the results are calculated and saved automatically.
This message appears if saving fails.
To Retry the Automatic Speaker Setup
Press the [ENTER] button. Make sure speakers that cannot be detected are connected properly.
HDMI Video Setup
If you connect a video component to HDMI IN 1 or 2, use this setting to assign that input to an input selector.
Press the [RECEIVER] button, followed by the [SETUP] button.
Use the Up and Down [ ]/[ ] buttons to select Video Input, and then press [ENTER].
Use the Up and Down [ ]/[ ] buttons to select HDMI DVD, HDMI VCR, or HDMI CBL and use the Left and Right [ ]/[ ] buttons to change the setting. If you connect a video component to HDMI IN 1 or 2, you must assign that input to an input selector. For example, if you connect your DVD player to HDMI IN 1, you must assign HDMI DVD setting to IN1. IN1: Select if the video component is connected to HDMI IN 1. IN2: Select if the video component is connected to HDMI IN 2. No: Select if youre not using the HDMI OUT.
Press the [SETUP] button. Setup closes.
Digital Audio Input Setup Changing the Input Display
If you connect an -capable Onkyo MiniDisc recorder, CD recorder, or RI Dock to the TAPE IN/OUT or CBL/SAT IN jacks, for to work properly, you must change this setting. This setting can only be changed on the AV receiver.
To enjoy Dolby Digital and DTS, you must connect your DVD player to the AV receiver digitally (coaxial or optical). These are the default digital audio input assignments.
Input selector DVD VCR/DVR CBL/SAT TAPE CD AUX Default assignment COAX 1 OPT 1 COAX 2 ---OPT 2 ----
Press the [TAPE] or [CBL/SAT] input selector button so that TAPE or CBL/SAT appears on the display.
You can change the digital audio input assignments if necessary. For example, if you connect your DVD player to the OPTICAL 1 DIGITAL IN (OPT1), you must assign that input to the DVD input selector, as follows.
DVD VCR/DVR CBL/SAT
Press the input selector button for the input selector that you want to assign. (Digital inputs cannot be assigned to the TUNER input selector.)
Press and hold down the [TAPE] or [CBL/SAT] input selector button (about 2 seconds) to change the setting. Repeat this step to select MD, CDR, or DOCK. For the TAPE input selector, the setting changes in this order: TAPE MD CDR DOCK For the CBL/SAT input selector, the setting changes in this order: CBL/SAT DOCK
Press the [DIGITAL INPUT] button. The current assignment appears.
Press the [DIGITAL INPUT] button repeatedly to select COAX1, COAX2, OPT1, OPT2, or (analog).
Note: DOCK can be selected for the TAPE input selector or CBL/SAT input selector, but not both at the same time.
These settings are stored when the AV receiver is set to Standby.
Selecting Listening Modes
For a description of each listening mode, see About the Listening Modes on page 50.
The Dolby Digital and DTS listening modes can only be selected if your DVD player is connected to the AV receiver with a digital audio connection (coaxial or optical). Listening mode availability depends on the format of the current input signal. While a pair of headphones is connected, you can select only the Pure Audio (not North American model), Mono, Direct, or Stereo listening mode. The listening modes cannot be selected while speaker set A is off.
Selecting with the Remote Controller
GUIDE TOP MENU PREVIOUS MENU
Selecting on the AV Receiver
[STEREO] button This button selects the Stereo listening mode.
[SURROUND] button This button selects the Dolby Digital and DTS listening modes and the Neural Surround* listening mode (* North American model only). LISTENING MODE [ ]/[ ] buttons Pressing these buttons repeatedly cycles through all of the listening modes that can be used with the current input source.
RT/PTY/TP MEMORY TUNING MODE
PURE AUDIO STEREO LISTENING MODE
[PURE AUDIO] button (not North American model) This button selects the Pure Audio listening mode. When this mode is selected, the AV receiver outputs no video signals and its display is turned off. Pressing this button again will select the previous listening mode. Video received by the HDMI IN 1 and 2 inputs is passed through to the HDMI OUT even if the Pure Audio listening mode is selected. [STEREO] button This button selects the Stereo listening mode. LISTENING MODE [ ]/[ ] buttons Pressing these buttons repeatedly cycles through all of the listening modes that can be used with the current input source.
Using the Listening ModesContinued
The following table shows which listening modes can be used with each input signal format.
Source format Analog, PCM*1 CD, TV, radio, cassette, etc. 3/2.1 2/2.1 Dolby Digital 2/0 1/0, 1+1 Other 3/2.1 2/2.1 DTS/DTS 96/24*2 DTS-ES 2/0 Discrete Matrix Multich analog
DVD, DTV, etc.
DVD, CD, etc.
Listening mode Pure Audio (Not North American models) Direct Stereo Mono Multich PLIIx Movie/Music/Game *3 Neo:6 Cinema Neo:6 Music Neural Surround (North American models only) Dolby D Dolby D + Neo:6 Dolby D EX Dolby D+PLIIx Music Dolby D+PLIIx Movie DTS, DTS 96/24 DTS-ES Discrete DTS DTS-ES Matrix DTS+Neo:6 DTS+Dolby EX DTS+PLIIx Music DTS+PLIIx Movie T-D Mono Movie Orchestra Unplugged Studio-Mix TV Logic All Ch Stereo Full Mono Dolby
Onkyo Original DSP
*1. In the Pure Audio and Direct listening modes, 32 kHz, 44.1 kHz, and 48 kHz PCM is processed at 64 kHz, 88.2 kHz, and 96 kHz respectively. In listening modes other than Pure Audio, Direct, and Stereo, 64 kHz, 88.2 kHz, and 96 kHz PCM is processed at 32 kHz, 44.1 kHz, and 48 kHz respectively. *2. In listening modes other than Pure Audio, Direct, Stereo, and DTS 96/24, DTS 96/24 sources are processed as normal DTS. *3. If the Surr Back parameter is set to None, or speaker set B is on, normal Pro Logic II is used. *4. Not available for 88.2 kHz and 96 kHz PCM input signals. *5. If the Surr Back setting is set to None, or speaker set B is on, normal DTS is used. *6. Available only when surround speakers are connected.
Using the CinemaFILTER
With the CinemaFILTER, you can soften overly bright movie soundtracks, which are typically mixed for reproduction in a movie theater. CinemaFILTER can be used with the following listening modes: Dolby Digital, Dolby Digital EX, PLII/IIx Movie, DTS, DTS-ES, DTS Neo:6 Cinema, DTS 96/24, Dolby/DTS+PLIIx Movie, Dolby/DTS+Neo:6, and DTS+Dolby EX.
Press the [RECEIVER] REMOTE MODE button, and then press the [CINE FLTR] button repeatedly to select: On: CinemaFILTER on. Off: CinemaFILTER off.
Using the Audio Adjust Settings
CINE FLTR L NIGHT
The Audio Adjust settings only affect speaker set A.
Press the [RECEIVER] button followed by the [SETUP] button.
Using the Late Night Function (Dolby Digital only)
With the Late Night function, you can reduce the dynamic range of Dolby Digital material so that you can still hear quiet parts even when listening at low volume levelsideal for watching movies late at night when you dont want to disturb anyone.
Use the Up and Down [ ]/[ ] buttons to select Audio Adjust, and then press [ENTER].
Press the [RECEIVER] REMOTE MODE button, and then press the [L NIGHT] button repeatedly to select: Off: Late Night function off. Low: Small reduction in dynamic range. High: Big reduction in dynamic range.
Use the Left and Right [ ]/[ ] buttons to change the setting. Press the Down [ ] button to select the next setting. Repeat this step for the other settings.
Notes: The effect of the Late Night function depends on the Dolby Digital material that you are playing, and with some material there will be little or no effect. The Late Night function is set to Off when the AV receiver is set to Standby.
The Audio Adjust settings are explained below.
Input Channel Settings
Multiplex This setting determines which channel is output from a stereo multiplex source. Use it to select audio channels or languages with multiplex sources, multilingual TV broadcasts, and so on. Main: The main channel is output (default). Sub: The sub channel is output. M/S: Both the main and sub channels are output. Mono Input Ch This setting determines which channel is output when the Mono listening mode is used with a stereo source. L+R: Both the left and right channels are output (default). L: Only the left channel is output. R: Only the right channel is output.
Center Width With this setting, you can adjust the width of the sound from the center speaker when using the Pro Logic II Music or Pro Logic IIx Music listening mode. Normally, the center channel sound is output by only the center speaker. (If youre not using a center speaker, the center channel sound will be distributed to the front left and right speakers to create a phantom center). This setting adjusts the front left, right, and center mix, allowing you to adjust the weight of the center channel sound. It can be adjusted from 0 to 7 (default value is 3).
Use the Down [ ] button to select Surr Back, and use the Left and Right [ ]/[ ] buttons to select Small, Large, or None. Small: Select if the surround back speakers are small. Large: Select if the surround back speakers are large. None: Select if no surround back speakers are connected. Notes: If the Surround setting in step 6 is set to None, this setting does not appear. If the Surround setting in step 6 is set to Small, the Large option cannot be selected. Use the Down [ ] button to select Surr Back Ch, and use the Left and Right [ ]/[ ] buttons to select 2ch or 1ch. 2ch: Select if two (left and right) surround back speakers are connected. 1ch: Select if one surround back speaker is connected. Note: If the Surround and Surr Back settings in steps 6 and 7 are set to None, this setting does not appear. Continue with step 9 of the Crossover Frequency setting.
This setting is set automatically by the Automatic Speaker Setup function (see page 37). This setting only applies to the speakers that you specied as Small in the Speaker Conguration on page 56. To get the best bass performance from your speaker system, you need to set the crossover frequency according to the size and frequency response of your speakers
Use the Down [ ] button to select Crossover, and then use the Left and Right [ ]/[ ] buttons to select a crossover frequency. Use the diameter of the smallest speaker in your system when choosing the crossover frequency.
Speaker cone diameter Over 8 in. (20 cm) 6-1/2 to 8 in. (1620 cm) 5-1/4 to 6-1/2 in. (1316 cm) 3-1/2 to 5-1/4 in. (913 cm) Under 3-1/2 in. (9 cm) Crossover frequency 40/50/60Hz* 80Hz 100Hz (default) 120Hz 150/200Hz*
*Choose the setting suitable for the speaker.
Note: These settings cannot be changed while headphones are connected, speaker set B is on, or the multichannel DVD input is being used.
Continue with step 10 of the Double Bass setting on the next page. Notes: For a more accurate setting, look up the frequency response in the manuals supplied with your speakers and set accordingly. Choose a higher crossover frequency if you want more sound from your subwoofer. These settings cannot be changed while headphones are connected, speaker set B is on, or the multichannel DVD input is being used.
This setting is not set automatically by the Automatic Speaker Setup function (see page 37). With the Double Bass function, you can boost bass output by feeding bass sounds from the front left and right channels to the subwoofer. This function can be set only if the Subwoofer setting (step 3) is set to Yes, and the Front setting (step 4) is set to Large in the Speaker Conguration on page 56.
These settings are set automatically by the Automatic Speaker Setup function (see page 37). With these settings, you can specify the distance from each speaker to the listening position.
Repeat step 4 so that the level of the test tone coming from each speaker is the same. Speakers that you set to No or None in the Speaker Conguration (page 56) do not output the test tone. Press the [SETUP] button. Setup closes. Dont forget to turn down the volume if you turned it up while setting the levels.
Press the [RECEIVER] REMOTE MODE button, followed by the [SETUP] button.
Use the Up and Down [ ]/[ ] buttons to select Level Cal, and then press [ENTER]. A pink noise test tone is output by the front left speaker.
Notes: A quick way to adjust the speaker levels is to press the remote controllers [TEST TONE] button to turn on the test tone, use the [LEVEL] and [LEVEL+] buttons to adjust the levels, and use the [CH SEL] button to select the speakers. The speaker levels cannot be adjusted while a pair of headphones is connected, speaker set B is on, or the AV receiver is muted.
These settings are set automatically by the Automatic Speaker Setup function (see page 37). Here you can adjust the tone of individual speakers. To set the volume of individual speakers, see page 59.
Use the Up and Down [ ]/[ ] buttons to select a frequency. Use the Left and Right [ ]/[ ] buttons to adjust the level at that frequency.
The volume at each frequency can be adjusted from 6 to +6 dB in 1 dB steps. Tip: Low frequencies (e.g., 80 Hz) affect bass sounds; high frequencies (e.g., 8000 Hz) affect treble sounds.
Use the Up and Down [ ]/[ ] buttons to select Equalizer, and then press [ENTER].
Use the Up [ ] button to select Ch, and then use the Left and Right [ ]/[ ] buttons to select another speaker. Repeat steps 5 and 6 for each speaker. Speakers that youve set to No or None in the Speaker Conguration (page 56) cannot be selected.
Use the Left and Right [ ]/[ ] buttons to select: Off: Tone off, response at. Audyssey: The tone for each speaker is set automatically by the Automatic Speaker Setup function. Be sure to select this setting after having performed the Automatic Speaker Setup. Manual: You can adjust the equalizer for each speaker manually. If you selected Manual, continue with this procedure. If you selected Off or Audyssey, go to step 7. Press the Down [ ] button, and then use the Left and Right [ ]/[ ] buttons to select a speaker.
Press the [SETUP] button. The setup menu closes.
Notes: The front, center, surround, and surround back speakers can be adjusted at Hz, 250 Hz, 800 Hz, 2500 Hz, and 8000 Hz. The subwoofer can be adjusted at 40 Hz, 80 Hz, and 160 Hz. While the Direct or Pure Audio listening mode is selected, the equalizer settings have no effect. This procedure can also be performed on the AV receiver by using its [SETUP], [ENTER], and arrow buttons.
Digital Input Signal Formats
The following table shows the display indicator for each digital signal format.
Format Dolby Digital DTS PCM PCM
Correcting Sound and Picture Sync
When using progressive scanning on your DVD player, you may nd that the picture and sound are out of sync. With this setting, you can correct this by delaying the audio signals. You can set it from 0 to 100 milliseconds (ms) in 20 millisecond steps.
Normally, the AV receiver detects the signal format automatically. However, if you experience either of the following issues when playing PCM or DTS material, you can specify the signal format as either PCM or DTS: If the beginnings of tracks from a PCM source are cut off, try the PCM setting. If noise is produced when fast forwarding or reversing a DTS CD, try the DTS setting.
Press the [RECEIVER] REMOTE MODE button.
Press and hold the AV receivers [DIGITAL INPUT] button for about 3 seconds.
While Auto is displayed (about 3 seconds), press the [DIGITAL INPUT] button repeatedly to select: PCM, DTS, or Auto. PCM: Only PCM format input signals will be heard. If the input signal is not PCM, the PCM indicator will ash and there will be no sound. DTS: Only DTS format input signals will be heard. If the input signal is not DTS, the DTS indicator will ash and there will be no sound. Auto (default): The format is detected automatically. If no digital input signal is present, the corresponding analog input is used instead.
Press and hold, for more than 4 seconds, the input selector button for the input source that you want to correct. This can be the [DVD], [VCR/DVR], [CBL/SAT], or [AUX] input source. Use the Left and Right [ ]/[ ] buttons to adjust the delay from 0 to 100 milliseconds in 20 millisecond steps.
Note: This setting is not available when the Pure Audio listening mode is used, or the Direct listening mode is used with an analog input signal.
Controlling Other Components
You can use the AV receivers remote controller (RC-681M) to control your other AV components, including those made by other manufacturers. This section explains how to enter the necessary remote control code for the component that you want to control (e.g., DVD player, TV, or VCR).
Look up the appropriate remote control code in the separate Remote Control Codes list. The codes are organized by category (e.g., DVD player, TV, etc.). While holding down the REMOTE MODE button that you want to set, press the [DISPLAY] button for 3 seconds. The REMOTE MODE button lights up.
Entering Remote Control Codes
To control another component, you must rst enter the appropriate remote control code to a REMOTE MODE button. Youll need to enter a code for each component that you want to control.
Within 30 seconds, use the number buttons to enter the 4-digit remote control code. The REMOTE MODE button ashes twice.
LEVEL+ CINE FLTR HDD
AUDIO SUBTITLE RANDOM REPEAT TEST TONE CH SEL PLAY MODE LEVEL-
Press the REMOTE MODE button again to select the remote controller mode, point the remote controller at the component, and check the operation. If the remote controller doesnt work as expected, and several remote codes are listed, try each one in turn and use the one that works best.
Notes: A remote control code cannot be entered for the [RECEIVER] REMOTE MODE button. The remote control codes provided are correct at the time of printing, but are subject to change.
Controlling Other ComponentsContinued
Remote Control Codes for Onkyo Components Connected via
Onkyo components that are connected via are controlled by pointing the remote controller at the AV receiver, not the component. This allows you to control components that are out of view, in a rack, for example.
Resetting REMOTE MODE Buttons
You can reset a REMOTE MODE button to its default remote control code.
Make sure the Onkyo component is connected with an cable and an analog audio cable (RCA). See page 35 for details. Enter the appropriate remote control code for the [DVD] or [CD] REMOTE MODE button. [DVD] REMOTE MODE button 1612: Onkyo DVD player with [CD/MD/CDR/DOCK] REMOTE MODE button 1327: Onkyo CD player with 1808: Onkyo MD recorder with 1322: Onkyo CD recorder with 1993: Onkyo RI Dock with See the previous page for how to enter remote control codes.
While holding down the REMOTE MODE button that you want to reset, press the [L NIGHT] button for 3 seconds. The REMOTE MODE button lights up.
Press the REMOTE MODE button again. The REMOTE MODE button ashes twice, indicating that its been reset.
Theres no picture Make sure that all video connecting plugs are pushed in all the way (page 24). Make sure that each video component is properly connected. The AV receiver does not convert between formats, so if a video source component is connected to a component video input, your TV must be connected to the component video output (page 25). If a video component is connected to an HDMI input, your TV must be connected to the HDMI OUT (page 29). On your TV, make sure that the video input to which the AV receiver is connected is selected. While the Pure Audio listening mode (not North American model) is selected, the video circuits are turned off and the AV receiver outputs no video signals. Reliable operation with an HDMI-to-DVI adapter is not guaranteed. In addition, video signals from a PC are not supported (page 29).
Reception is noisy, stereo FM reception suffers from hiss, or the FM STEREO indicator doesnt appear Relocate your antenna. Move the AV receiver away from your TV or computer. Listen to the station in mono (page 44). When listening to an AM station, operating the remote controller may cause noise. Passing cars and airplanes can cause interference. Concrete walls weaken radio signals. If nothing improves the reception, install an outdoor antenna.
Cant record On your recorder, make sure the correct input is selected. To prevent signal loops and damage to the AV receiver, input signals are not fed through to outputs with the same name (e.g., TAPE IN to TAPE OUT, or VCR/DVR IN to VCR/DVR OUT). When the Pure Audio listening mode is selected, recording is not possible because no video signals are output. Select another listening mode.
The sound changes when I connect my headphones When a pair of headphones is connected, the listening mode is set to Stereo, unless its already set to Stereo, Mono, Direct, or Pure Audio (not North American model). The display doesnt work The display is turned off when the Pure Audio (not North American model) listening mode is selected. How do I change the language of a multiplex source Use the Multiplex setting on the Audio Adjust menu to select Main or Sub (page 53). The functions dont work To use , you must make an connection and an analog audio connection (RCA) between the component and AV receiver, even if they are connected digitally (page 35). During automatic speaker setup, measurement fails and the message Noise Error! appears This can be caused by a speaker malfunction. Make sure all of your speakers are working properly.
The remote controller doesnt work Make sure that the batteries are installed with the correct polarity (page 13). Make sure that the remote controller is not too far away from the AV receiver, and that theres no obstruction between the remote controller and the AV receivers remote control sensor (page 13). Make sure youve selected the correct remote controller mode (page 14). Make sure youve entered the correct remote control code (page 62). Cant control other components Make sure youve selected the correct remote controller mode (page 14). If youve connected an -capable Onkyo MD recorder, CD recorder, or RI Dock to the TAPE IN/OUT jacks or CBL/SAT jacks, for the remote controller to work properly, you must set the Input Display to MD, CDR, or DOCK (page 41). The entered remote control code may not be correct. If more than one code is listed, try each one. With some AV components, certain buttons may not work as expected, and some may not work at all. To control an Onkyo component thats connected via , point the remote controller at the AV receiver. Be sure to enter the appropriate remote control code rst (page 62). To control an Onkyo component thats not connected via , or another manufacturers component, point the remote controller at the component. Be sure to enter the appropriate remote control code rst (page 62).
07.2.23 3:06 PM
Home Entertainment 7.1-Channel Receiver/Speaker Package
Neatly Covering All A/V Formats, Precisely Tailored for Your Home
When it comes to all-in-one home theatre, the HT-SR800 has made a clean break from the pack.Youre looking at packaged home theatre that neatly integrates your high-definition entertainment and your HDTV through an HDMI channel that transports video with a resolution all the way up to 1080p. Ably supported by component video switching, the HT-SR800 will handle most of the A/V components or formats currently available, as well as the spectacular quality of high-definition discs. Also, reinforcing the convenience of matched components, this package is the first on the block to use Audyssey 2EQ/HTIB room-correction technology specifically designed for integrated systems.The optionssuch as iPod integrationcan really extend your reach, making the HT-SR800 one of the more complete packages available.
HT -R550 7.1-Channel A/V Surround Home Theatre Receiver
160 W/Ch, Minimum into 8 , 1 kHz, 1 Channel Driven, JEITA 130 W/Ch, Minimum into 8 , 1 kHz, 1 Channel Driven, IEC 110 W/Ch, Minimum into 8 , 1 kHz, 2 Channels Driven, FTC DTS, DTS 96/24, DTS-ES Discrete/Matrix, DTS Neo:6 Decoding Dolby Digital, Dolby Digital EX, Dolby Pro Logic IIx Decoding WRAT (Wide Range Amplifier Technology) Optimum Gain Volume Circuitry H.C.P.S. (High Current Power Supply) Massive High Power Transformer 192 kHz/24-Bit DACs for All Channels 32-Bit Processing DSP Chip HDMI Pass-Thru (1080p Compatible; 2 Inputs and 1 Output)* HDTV-Capable (50 MHz) Component Video Switching (3 Inputs/1 Output) 4 Digital Inputs (2 Optical/2 Coaxial) 3 S-Video Inputs and 2 Outputs A-Form Listening Mode Memory Non-Scaling Configuration Late Night Mode (High/Low/Off) Pure Audio Mode
CinemaFILTER Double Bass Function Tone Control (Bass/Treble) for Front L/R Channels Direct Mode Speaker A/B Drive Color-Coded 7.1-Multichannel Inputs (Receive 7.1 Surround Sound from Compatible Blu-ray and HD-DVD Players) Color-Coded Speaker Terminals 40 FM/AM Random presets Audyssey 2EQ/HTIB Technology to Correct Room Acoustic Problems and to Calibrate Speakers Crossover Adjustment (40/50/60/80/100/120/ 150/200 Hz) for Bass Management Compatible with the RI (Remote Interactive) Dock for the iPod A/V Synchronization Function (Up to 100 ms in 20 ms Steps) Headphone Jack Preprogrammed RI (Remote Interactive) Remote Control * A separate audio connection is necessary to process multichannel audio.
SKF-550F 2-Way Bass Reflex Front Speakers
12 cm OMF Diaphragm Cone Woofer x 2 2.5 cm Balanced-Dome Tweeter Frequency Response: 60 Hz50 kHz Max. Input Power: 130 W Magnetically Shielded 12 cm OMF Diaphragm Cone Woofer x 2 2.5 cm Balanced-Dome Tweeter Frequency Response: 60 Hz50 kHz Max. Input Power: 130 W Magnetically Shielded
SKC-550C 2-Way Bass Reflex Center Speaker
SKM-550S/SKB-550 Full-Range AcousticSuspension Surround/Surround Back Speakers
8 cm Cone Frequency Response: 160 Hz20 kHz Max. Input Power: 130 W
Note: All speakers feature an impedance of 8 ohms, a maximum input power rating of 130 W, color-coded speaker terminals and speaker cable.
SKW-550 Bass Reflex Powered Subwoofer
Built-in 230 W Amplifier Auto-Standby/On Circuitry Output Level Control 25 cm Cone Woofer Line Level Input Frequency response: 25 Hz150 Hz
HTP-550 7.1-Channel Home Theatre Speaker System
either of Onkyos RI Docks, you can integrate most iPod models into your home theatre system.Youll also be able to take advantage of Onkyos Remote Interactive (RI) system for greater iPod control through your remote.
Tuning Frequency Range FM 87.5 MHz108.0 MHz AM 522 kHz1,611 kHz 530 kHz1,710 kHz FM/AM Preset Memory 40 stations
HDMI Pass-Thru* for the Leading Hi-Def Displays and Media
With two HDMI inputs and one output, the HT-SR800 is the perfect complement for highdefinition displays and media. With HDMI as the video conduit, the HT-SR800 will effortlessly transport and enable the full potential of Blu-ray, HD-DVD, DVD, HD broadcasts and gaming. HDMI will deliver 720p, 1080i and 1080p video signals from two sources for one connection direct to your HDTV. Its 1080p pass-thru capability is perfect for getting the highest possible video resolution from PlayStation 3 and dedicated Blu-ray Disc and HDDVD players. * A separate audio connection is necessary to process multichannel audio.
s RECEIVER SECTION
160 W + 160 W (8 , 1 kHz, 1 channel driven, JEITA) 130 W + 130 W (8 , 1 kHz, 1 channel driven, IEC) 110 W + 110 W (8 , 1 kHz, 2 channels driven, FTC) Center 160 W (8 , 1 kHz, 1 channel driven, JEITA) 130 W (8 , 1 kHz, 1 channel driven, IEC) 110 W (8 , 1 kHz, 2 channels driven, FTC) Surround L/R 160 W + 160 W (8 , 1 kHz, 1 channel driven, JEITA) 130 W + 130 W (8 , 1 kHz, 1 channel driven, IEC) 110 W + 110 W (8 , 1 kHz, 2 channels driven, FTC) Surround Back L/R 160 W + 160 W (8 , 1 kHz, 1 channel driven, JEITA) 130 W + 130 W (8 , 1 kHz, 1 channel driven, IEC) 110 W + 110 W (8 , 1 kHz, 2 channels driven, FTC) Dynamic Power 210 W (3 , 1 ch) 190 W (4 , 1 ch) 130 W (8 , 1 ch) THD (Total Harmonic Distortion) 0.9% (Rated Power) Damping Factor 60 (Front, 1 kHz, 8 ) Input Sensitivity and Impedance 200 mV/47 k (Line) Output Level and Impedance 200 mV/470 (Rec out) Frequency Response 5 Hz100 kHz/ +1 dB, -3 dB (Direct mode) Tone Control 10 dB, 50 Hz (Bass) 10 dB, 20 kHz (Treble) Signal-to-Noise Ratio 100 dB (Line, IHF-A) Speaker Impedance Power Output Front L/R
Power Supply AC 230 V, 50 Hz Power Consumption 670 W Standby Power Consumption 0.5 W Dimensions (W x H x D) 435 x 150 x 377 mm Weight 10.2 kg
s SPEAKER SECTION
Speaker Type Front/Center Surround/Surround Back Subwoofer Drivers Front/Center 2-way, bass reflex Full-range, acoustic-suspension Bass reflex powered 12 cm OMF diaphragm woofer x 2, 2.5 cm balanced-dome tweeter 8 cm full-range cone 25 cm cone
Component Video Switching (50 MHz) with HDTV Connectivity
Giving you even more integration, the HT-SR800 will take up to three of the latest A/V componentsincluding DVRs and the latest gaming consolesconnected simultaneously for one component video output to an HDTV.
Wide Range Amplifier Technology (WRAT) Providing Amplification Backbone
Without a time-tested amplifier design and precise digital-to-analog conversion process, the most advanced processing features cannot deliver a higher standard of audio from the latest highdefinition video and audio formats. WRAT is based on three key factors: (1) A low negative-feedback design for cleaner audio across the frequency range; (2) Closed ground-loop circuits to cancel individual circuit noise and keep the ground potential free of distortion; and (3) A High Instantaneous-Current Capability to handle speaker reflex energy and impedance fluctuations. WRAT will bring the best out of movie, music, broadcast and gaming sources.
Surround/Surround Back Subwoofer Frequency Response Front/Center 60 Hz50 kHz Surround/Surround Back 160 Hz20 kHz Subwoofer 25 Hz150 Hz Output Sound Pressure Level Front/Center 87.5 dB/W/m Surround/Surround Back 82 dB/W/m Max. Input Power Front/Center/Surround/ Surround Back 130 W Max. Output Power Subwoofer 230 W Nominal Impedance Front/Center/Surround/ Surround Back 8 Input Sensitivity/Impedance Subwoofer 140 mV/20 k
Dimensions (W x H x D) Front Center Surround/Surround Back Subwoofer Weight Front/Center Surround/Surround Back Subwoofer 157 x 433 x 194 mm 433 x 157 x 194 mm 155 x 266 x 98 mm 276 x 510 x 417 mm 3.9 kg 1.3 kg 11.4 kg
Audyssey 2EQ/HTIB for the Ideal Loudspeaker Response
Sound from your loudspeakers is affected by walls, furniture and other objects in your room, creating peaks and dips at different frequencies.To counter this, Audyssey (in collaboration with Onkyo) has developed the first in its combination of roomcorrection technologies specifically designed for home theatre packages. Audyssey 2EQ/HTIB works by combining speaker calibration with room correction to deliver optimally tuned sound for affordable home theatre packages. First, the speakers are pre-calibrated to optimize the speaker system. Then 2EQ performs room correction to remove distortion, thereby creating the perfect match between the speakers and your room.The end result is an ideal loudspeaker response that ensures your movies and music sound exactly as they should.
Input Sensitivity/Output Level and Impedance Video 1.0 Vp-p/75 (Component and S-Video Y) 0.7 Vp-p/75 (Component PB/CB, PR/CR) 0.28 Vp-p/75 (S-Video C, PR/CR) 1.0 Vp-p/75 (Composite) Component Video Frequency Response 5 Hz50 MHz
Dimensions (W x H x D) Weight 779 x 794 x 512 mm 45.0 kg
7.1 Speaker System with Fine-Tuning Capabilities
These speakers can easily handle the most dynamic film soundtracks and provide good music reproduction as well. Given the low-frequency energy requirements of home theatre, the package is anchored around its 230 W bass amplification.The front, center and surround speakers provide the dynamic range and the ability to handle demanding audio signals.
Fully Compatible with the iPod Family via Onkyo RI Docks
The ubiquitous iPod continues to revolutionize modern media. By connecting the HT-SR800 with
Due to a policy of continuous product improvement, Onkyo reserves the right to change specifications and appearance without notice. Dolby, Pro Logic, Surround EX and the double-D symbol are trademarks of Dolby Laboratories. DTS, DTS-ES Extended Surround, DTS 96/24 and Neo:6 are trademarks of Digital Theater Systems, Inc. Manufactured under license from Audyssey Laboratories. HDMI, the HDMI logo and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC. iPod is a trademark of Apple Inc., registered in the U.S. and other countries. CinemaFILTER and Theater Dimensional are trademarks of Onkyo Corporation. All other trademarks and registered trademarks are the property of their respective holders. Onkyo Corporation 2-1 Nisshin-cho, Neyagawa-shi, Osaka 572-8540, JAPAN Tel: +81-72-831-8136 Fax: +81-72-833-5222 http://www.onkyo.com/ Australia: Sole Distributor, Amber Technology Ltd. Unit B, 5 Skyline Place, Frenchs Forest, NSW 2086, Sydney, AUSTRALIA Tel: +61-2-9452-8600 Fax: +61-2-9975-1368 http://www.ambertech.com.au
New Zealand: B&W Loudspeakers (N.Z.) Ltd. 95 Tuam Street, Christchurch, NEW ZEALAND Tel: +64-3-365-5677 Fax: +64-3-366-7853 http://www.onkyo.co.nz
NPR No. 07N05a 01/07 Printed in Japan
MDR-IF5000 190 VP Printer Edition PD-31 TX-SR504E Samsung N150 KD-G431 Camileo H10 EDM 35 ADV106 HS-2000 Heidleberg CD51 LE46A557p2F MF8170C KEH-P6100RDS HR3210C PSL02A Stratocaster Review 32LG40 XT350-1999 DMC-L10K RL41hcsw D 61 CT915 Lx03 EMP-TW10H Hdmi All-IN-ONE Receiver DCR-TRV145E System VI-12-18 PDP-433MXE LPF 6200 Travelmate 5210 PC78XL TL-WR841N Price Premium KM-2050 RB-970BX Laserjet 6P I8000H LK-93TV DBX 1046 Roadmate 760 Specs LS-4000 ED 350-2005 NWA-3500 MS-570MS Intex 87PO Gpsmap 60CS Software VCT-1500L HR7638 FP91G-U 50 W 19HFL3340D Dmreh585 Of Time CDX-C570R Vienna DG814 LA32A330j1 STR-DH800 AN-M2 C-2000 NF7-S A3100 IS ALL-IN-ONE DSC- W110 52HD1RU A7V600-X BRC1A61 Treo 700P C330X Virtualdj RD-XV45 IC-2710H WA11RA KX-TCD300E NEC E949 GZ-MG155E GY-DV5000 EFW 6325 RM-V8 KD-SH9101 26LH2000 NAD T770 Nokia 1100 12K-CHA TH-F6A WS-32Z409P SA-VE155 Multipla MS-6566 DJ025SP UE-46C6510 MCD139B DSC-TX5 Biposto BD-C5500C
manuel d'instructions, Guide de l'utilisateur | Manual de instrucciones, Instrucciones de uso | Bedienungsanleitung, Bedienungsanleitung | Manual de Instruções, guia do usuário | инструкция | návod na použitie, Užívateľská príručka, návod k použití | bruksanvisningen | instrukcja, podręcznik użytkownika | kullanım kılavuzu, Kullanım | kézikönyv, használati útmutató | manuale di istruzioni, istruzioni d'uso | handleiding, gebruikershandleiding
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101